freebsd-nq/sys/kern/subr_trap.c

307 lines
8.8 KiB
C
Raw Normal View History

1993-06-12 14:58:17 +00:00
/*-
* Copyright (C) 1994, David Greenman
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
* Copyright (c) 2007 The FreeBSD Foundation
1993-06-12 14:58:17 +00:00
*
* This code is derived from software contributed to Berkeley by
* the University of Utah, and William Jolitz.
*
* Portions of this software were developed by A. Joseph Koshy under
* sponsorship from the FreeBSD Foundation and Google, Inc.
*
1993-06-12 14:58:17 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
genassym.c: Remove NKMEMCLUSTERS, it is no longer define or used. locores.s: Fix comment on PTDpde and APTDpde to be pde instead of pte Add new equation for calculating location of Sysmap Remove Bill's old #ifdef garbage for counting up memory, that stuff will never be made to work and was just cluttering up the file. Add code that places the PTD, page table pages, and kernel stack below the 640k ISA hole if there is room for it, otherwise put this stuff all at 1MB. This fixes the 28K bogusity in the boot blocks, that can now go away! Fix the caclulation of where first is to be dependent on NKPDE so that we can skip over the above mentioned areas. The 28K thing is now 44K in size due to the increase in kernel virtual memory space, but since we no longer have to worry about that this is no big deal. Use if NNPX > 0 instead of ifdef NPX for floating point code. machdep.c Change the calculation of for the buffer cache to be 20% of all memory above 2MB and add back the upper limit of 2/5's of the VM_KMEM_SIZE so that we do not eat ALL of the kernel memory space on large memory machines, note that this will not even come into effect unless you have more than 32MB. The current buffer cache limit is 6.7MB due to this caclulation. It seems that we where erroniously allocating bufpages pages for buffer_map. buffer_map is UNUSED in this implementation of the buffer cache, but since the map is referenced in several if statements a quick fix was to simply allocate 1 vm page (but no real memory) to it. pmap.h Remove rcsid, don't want them in the kernel files! Removed some cruft inside an #ifdef DEBUGx that caused compiler errors if you where compiling this for debug. Use the #defines for PD_SHIFT and PG_SHIFT in place of constants. trap.c: Remove patch kit header and rcsid, fix $Id$. Now include "npx.h" and use NNPX for controlling the floating point code. Remove a now completly invalid check for a maximum virtual address, the virtual address now ends at 0xFFFFFFFF so there is no more MAX!! (Thanks David, I completly missed that one!) vm_machdep.c Remove patch kit header and rcsid, fix $Id$. Now include "npx.h" and use NNPX for controlling the floating point code. Replace several 0xFE00000 constants with KERNBASE
1993-10-15 10:34:29 +00:00
* from: @(#)trap.c 7.4 (Berkeley) 5/13/91
1993-06-12 14:58:17 +00:00
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_hwpmc_hooks.h"
#include "opt_ktrace.h"
2007-06-12 23:27:31 +00:00
#include "opt_sched.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/capsicum.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/pmckern.h>
#include <sys/proc.h>
#include <sys/ktr.h>
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
#include <sys/pioctl.h>
#include <sys/ptrace.h>
#include <sys/racct.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/signalvar.h>
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
#include <sys/syscall.h>
#include <sys/syscallsubr.h>
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
#include <sys/sysent.h>
#include <sys/systm.h>
#include <sys/vmmeter.h>
#ifdef KTRACE
#include <sys/uio.h>
#include <sys/ktrace.h>
#endif
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
#include <security/audit/audit.h>
#include <machine/cpu.h>
#ifdef VIMAGE
#include <net/vnet.h>
#endif
#ifdef HWPMC_HOOKS
#include <sys/pmckern.h>
#endif
#include <security/mac/mac_framework.h>
void (*softdep_ast_cleanup)(void);
/*
* Define the code needed before returning to user mode, for trap and
* syscall.
*/
void
userret(struct thread *td, struct trapframe *frame)
{
struct proc *p = td->td_proc;
CTR3(KTR_SYSC, "userret: thread %p (pid %d, %s)", td, p->p_pid,
td->td_name);
KASSERT((p->p_flag & P_WEXIT) == 0,
("Exiting process returns to usermode"));
Currently, when signal is delivered to the process and there is a thread not blocking the signal, signal is placed on the thread sigqueue. If the selected thread is in kernel executing thr_exit() or sigprocmask() syscalls, then signal might be not delivered to usermode for arbitrary amount of time, and for exiting thread it is lost. Put process-directed signals to the process queue unconditionally, selecting the thread to deliver the signal only by the thread returning to usermode, since only then the thread can handle delivery of signal reliably. For exiting thread or thread that has blocked some signals, check whether the newly blocked signal is queued for the process, and try to find a thread to wakeup for delivery, in reschedule_signal(). For exiting thread, assume that all signals are blocked. Change cursig() and postsig() to look both into the thread and process signal queues. When there is a signal that thread returning to usermode could consume, TDF_NEEDSIGCHK flag is not neccessary set now. Do unlocked read of p_siglist and p_pendingcnt to check for queued signals. Note that thread that has a signal unblocked might get spurious wakeup and EINTR from the interruptible system call now, due to the possibility of being selected by reschedule_signals(), while other thread returned to usermode earlier and removed the signal from process queue. This should not cause compliance issues, since the thread has not blocked a signal and thus should be ready to receive it anyway. Reported by: Justin Teller <justin.teller gmail com> Reviewed by: davidxu, jilles MFC after: 1 month
2009-10-11 16:49:30 +00:00
#if 0
#ifdef DIAGNOSTIC
/* Check that we called signotify() enough. */
PROC_LOCK(p);
thread_lock(td);
if (SIGPENDING(td) && ((td->td_flags & TDF_NEEDSIGCHK) == 0 ||
(td->td_flags & TDF_ASTPENDING) == 0))
printf("failed to set signal flags properly for ast()\n");
thread_unlock(td);
PROC_UNLOCK(p);
#endif
Currently, when signal is delivered to the process and there is a thread not blocking the signal, signal is placed on the thread sigqueue. If the selected thread is in kernel executing thr_exit() or sigprocmask() syscalls, then signal might be not delivered to usermode for arbitrary amount of time, and for exiting thread it is lost. Put process-directed signals to the process queue unconditionally, selecting the thread to deliver the signal only by the thread returning to usermode, since only then the thread can handle delivery of signal reliably. For exiting thread or thread that has blocked some signals, check whether the newly blocked signal is queued for the process, and try to find a thread to wakeup for delivery, in reschedule_signal(). For exiting thread, assume that all signals are blocked. Change cursig() and postsig() to look both into the thread and process signal queues. When there is a signal that thread returning to usermode could consume, TDF_NEEDSIGCHK flag is not neccessary set now. Do unlocked read of p_siglist and p_pendingcnt to check for queued signals. Note that thread that has a signal unblocked might get spurious wakeup and EINTR from the interruptible system call now, due to the possibility of being selected by reschedule_signals(), while other thread returned to usermode earlier and removed the signal from process queue. This should not cause compliance issues, since the thread has not blocked a signal and thus should be ready to receive it anyway. Reported by: Justin Teller <justin.teller gmail com> Reviewed by: davidxu, jilles MFC after: 1 month
2009-10-11 16:49:30 +00:00
#endif
Moderate rewrite of kernel ktrace code to attempt to generally improve reliability when tracing fast-moving processes or writing traces to slow file systems by avoiding unbounded queueuing and dropped records. Record loss was previously possible when the global pool of records become depleted as a result of record generation outstripping record commit, which occurred quickly in many common situations. These changes partially restore the 4.x model of committing ktrace records at the point of trace generation (synchronous), but maintain the 5.x deferred record commit behavior (asynchronous) for situations where entering VFS and sleeping is not possible (i.e., in the scheduler). Records are now queued per-process as opposed to globally, with processes responsible for committing records from their own context as required. - Eliminate the ktrace worker thread and global record queue, as they are no longer used. Keep the global free record list, as records are still used. - Add a per-process record queue, which will hold any asynchronously generated records, such as from context switches. This replaces the global queue as the place to submit asynchronous records to. - When a record is committed asynchronously, simply queue it to the process. - When a record is committed synchronously, first drain any pending per-process records in order to maintain ordering as best we can. Currently ordering between competing threads is provided via a global ktrace_sx, but a per-process flag or lock may be desirable in the future. - When a process returns to user space following a system call, trap, signal delivery, etc, flush any pending records. - When a process exits, flush any pending records. - Assert on process tear-down that there are no pending records. - Slightly abstract the notion of being "in ktrace", which is used to prevent the recursive generation of records, as well as generating traces for ktrace events. Future work here might look at changing the set of events marked for synchronous and asynchronous record generation, re-balancing queue depth, timeliness of commit to disk, and so on. I.e., performing a drain every (n) records. MFC after: 1 month Discussed with: jhb Requested by: Marc Olzheim <marcolz at stack dot nl>
2005-11-13 13:27:44 +00:00
#ifdef KTRACE
KTRUSERRET(td);
#endif
if (softdep_ast_cleanup != NULL)
softdep_ast_cleanup();
/*
* If this thread tickled GEOM, we need to wait for the giggling to
* stop before we return to userland
*/
if (td->td_pflags & TDP_GEOM)
g_waitidle();
/*
* Charge system time if profiling.
*/
if (p->p_flag & P_PROFIL)
addupc_task(td, TRAPF_PC(frame), td->td_pticks * psratio);
/*
* Let the scheduler adjust our priority etc.
*/
sched_userret(td);
/*
* Check for misbehavior.
*
* In case there is a callchain tracing ongoing because of
* hwpmc(4), skip the scheduler pinning check.
* hwpmc(4) subsystem, infact, will collect callchain informations
* at ast() checkpoint, which is past userret().
*/
WITNESS_WARN(WARN_PANIC, NULL, "userret: returning");
KASSERT(td->td_critnest == 0,
("userret: Returning in a critical section"));
KASSERT(td->td_locks == 0,
("userret: Returning with %d locks held", td->td_locks));
KASSERT(td->td_rw_rlocks == 0,
("userret: Returning with %d rwlocks held in read mode",
td->td_rw_rlocks));
KASSERT((td->td_pflags & TDP_NOFAULTING) == 0,
("userret: Returning with pagefaults disabled"));
KASSERT(td->td_no_sleeping == 0,
("userret: Returning with sleep disabled"));
KASSERT(td->td_pinned == 0 || (td->td_pflags & TDP_CALLCHAIN) != 0,
("userret: Returning with with pinned thread"));
KASSERT(td->td_vp_reserv == 0,
("userret: Returning while holding vnode reservation"));
KASSERT((td->td_flags & TDF_SBDRY) == 0,
("userret: Returning with stop signals deferred"));
KASSERT(td->td_su == NULL,
("userret: Returning with SU cleanup request not handled"));
#ifdef VIMAGE
/* Unfortunately td_vnet_lpush needs VNET_DEBUG. */
VNET_ASSERT(curvnet == NULL,
("%s: Returning on td %p (pid %d, %s) with vnet %p set in %s",
__func__, td, p->p_pid, td->td_name, curvnet,
(td->td_vnet_lpush != NULL) ? td->td_vnet_lpush : "N/A"));
#endif
#ifdef RACCT
if (racct_enable) {
PROC_LOCK(p);
while (p->p_throttled == 1)
msleep(p->p_racct, &p->p_mtx, 0, "racct", 0);
PROC_UNLOCK(p);
}
#endif
}
1993-06-12 14:58:17 +00:00
/*
* Process an asynchronous software trap.
* This is relatively easy.
* This function will return with preemption disabled.
1993-06-12 14:58:17 +00:00
*/
void
ast(struct trapframe *framep)
{
struct thread *td;
struct proc *p;
int flags;
int sig;
td = curthread;
p = td->td_proc;
CTR3(KTR_SYSC, "ast: thread %p (pid %d, %s)", td, p->p_pid,
p->p_comm);
KASSERT(TRAPF_USERMODE(framep), ("ast in kernel mode"));
WITNESS_WARN(WARN_PANIC, NULL, "Returning to user mode");
mtx_assert(&Giant, MA_NOTOWNED);
THREAD_LOCK_ASSERT(td, MA_NOTOWNED);
td->td_frame = framep;
td->td_pticks = 0;
/*
* This updates the td_flag's for the checks below in one
* "atomic" operation with turning off the astpending flag.
* If another AST is triggered while we are handling the
* AST's saved in flags, the astpending flag will be set and
* ast() will be called again.
*/
thread_lock(td);
flags = td->td_flags;
td->td_flags &= ~(TDF_ASTPENDING | TDF_NEEDSIGCHK | TDF_NEEDSUSPCHK |
TDF_NEEDRESCHED | TDF_ALRMPEND | TDF_PROFPEND | TDF_MACPEND);
thread_unlock(td);
PCPU_INC(cnt.v_trap);
2004-09-22 15:24:33 +00:00
if (td->td_ucred != p->p_ucred)
cred_update_thread(td);
if (td->td_pflags & TDP_OWEUPC && p->p_flag & P_PROFIL) {
addupc_task(td, td->td_profil_addr, td->td_profil_ticks);
td->td_profil_ticks = 0;
td->td_pflags &= ~TDP_OWEUPC;
}
#ifdef HWPMC_HOOKS
/* Handle Software PMC callchain capture. */
if (PMC_IS_PENDING_CALLCHAIN(td))
PMC_CALL_HOOK_UNLOCKED(td, PMC_FN_USER_CALLCHAIN_SOFT, (void *) framep);
#endif
if (flags & TDF_ALRMPEND) {
PROC_LOCK(p);
kern_psignal(p, SIGVTALRM);
PROC_UNLOCK(p);
}
if (flags & TDF_PROFPEND) {
PROC_LOCK(p);
kern_psignal(p, SIGPROF);
PROC_UNLOCK(p);
}
#ifdef MAC
if (flags & TDF_MACPEND)
mac_thread_userret(td);
#endif
if (flags & TDF_NEEDRESCHED) {
#ifdef KTRACE
if (KTRPOINT(td, KTR_CSW))
ktrcsw(1, 1, __func__);
#endif
thread_lock(td);
sched_prio(td, td->td_user_pri);
mi_switch(SW_INVOL | SWT_NEEDRESCHED, NULL);
thread_unlock(td);
#ifdef KTRACE
if (KTRPOINT(td, KTR_CSW))
ktrcsw(0, 1, __func__);
#endif
}
Currently, when signal is delivered to the process and there is a thread not blocking the signal, signal is placed on the thread sigqueue. If the selected thread is in kernel executing thr_exit() or sigprocmask() syscalls, then signal might be not delivered to usermode for arbitrary amount of time, and for exiting thread it is lost. Put process-directed signals to the process queue unconditionally, selecting the thread to deliver the signal only by the thread returning to usermode, since only then the thread can handle delivery of signal reliably. For exiting thread or thread that has blocked some signals, check whether the newly blocked signal is queued for the process, and try to find a thread to wakeup for delivery, in reschedule_signal(). For exiting thread, assume that all signals are blocked. Change cursig() and postsig() to look both into the thread and process signal queues. When there is a signal that thread returning to usermode could consume, TDF_NEEDSIGCHK flag is not neccessary set now. Do unlocked read of p_siglist and p_pendingcnt to check for queued signals. Note that thread that has a signal unblocked might get spurious wakeup and EINTR from the interruptible system call now, due to the possibility of being selected by reschedule_signals(), while other thread returned to usermode earlier and removed the signal from process queue. This should not cause compliance issues, since the thread has not blocked a signal and thus should be ready to receive it anyway. Reported by: Justin Teller <justin.teller gmail com> Reviewed by: davidxu, jilles MFC after: 1 month
2009-10-11 16:49:30 +00:00
/*
* Check for signals. Unlocked reads of p_pendingcnt or
* p_siglist might cause process-directed signal to be handled
* later.
*/
if (flags & TDF_NEEDSIGCHK || p->p_pendingcnt > 0 ||
!SIGISEMPTY(p->p_siglist)) {
PROC_LOCK(p);
mtx_lock(&p->p_sigacts->ps_mtx);
while ((sig = cursig(td)) != 0)
postsig(sig);
mtx_unlock(&p->p_sigacts->ps_mtx);
PROC_UNLOCK(p);
}
/*
* We need to check to see if we have to exit or wait due to a
* single threading requirement or some other STOP condition.
*/
if (flags & TDF_NEEDSUSPCHK) {
PROC_LOCK(p);
thread_suspend_check(0);
PROC_UNLOCK(p);
}
The biggie: Get rid of the UPAGES from the top of the per-process address space. (!) Have each process use the kernel stack and pcb in the kvm space. Since the stacks are at a different address, we cannot copy the stack at fork() and allow the child to return up through the function call tree to return to user mode - create a new execution context and have the new process begin executing from cpu_switch() and go to user mode directly. In theory this should speed up fork a bit. Context switch the tss_esp0 pointer in the common tss. This is a lot simpler since than swithching the gdt[GPROC0_SEL].sd.sd_base pointer to each process's tss since the esp0 pointer is a 32 bit pointer, and the sd_base setting is split into three different bit sections at non-aligned boundaries and requires a lot of twiddling to reset. The 8K of memory at the top of the process space is now empty, and unmapped (and unmappable, it's higher than VM_MAXUSER_ADDRESS). Simplity the pmap code to manage process contexts, we no longer have to double map the UPAGES, this simplifies and should measuably speed up fork(). The following parts came from John Dyson: Set PG_G on the UPAGES that are now in kernel context, and invalidate them when swapping them out. Move the upages object (upobj) from the vmspace to the proc structure. Now that the UPAGES (pcb and kernel stack) are out of user space, make rfork(..RFMEM..) do what was intended by sharing the vmspace entirely via reference counting rather than simply inheriting the mappings.
1997-04-07 07:16:06 +00:00
if (td->td_pflags & TDP_OLDMASK) {
td->td_pflags &= ~TDP_OLDMASK;
kern_sigprocmask(td, SIG_SETMASK, &td->td_oldsigmask, NULL, 0);
}
userret(td, framep);
The biggie: Get rid of the UPAGES from the top of the per-process address space. (!) Have each process use the kernel stack and pcb in the kvm space. Since the stacks are at a different address, we cannot copy the stack at fork() and allow the child to return up through the function call tree to return to user mode - create a new execution context and have the new process begin executing from cpu_switch() and go to user mode directly. In theory this should speed up fork a bit. Context switch the tss_esp0 pointer in the common tss. This is a lot simpler since than swithching the gdt[GPROC0_SEL].sd.sd_base pointer to each process's tss since the esp0 pointer is a 32 bit pointer, and the sd_base setting is split into three different bit sections at non-aligned boundaries and requires a lot of twiddling to reset. The 8K of memory at the top of the process space is now empty, and unmapped (and unmappable, it's higher than VM_MAXUSER_ADDRESS). Simplity the pmap code to manage process contexts, we no longer have to double map the UPAGES, this simplifies and should measuably speed up fork(). The following parts came from John Dyson: Set PG_G on the UPAGES that are now in kernel context, and invalidate them when swapping them out. Move the upages object (upobj) from the vmspace to the proc structure. Now that the UPAGES (pcb and kernel stack) are out of user space, make rfork(..RFMEM..) do what was intended by sharing the vmspace entirely via reference counting rather than simply inheriting the mappings.
1997-04-07 07:16:06 +00:00
}
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
const char *
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
syscallname(struct proc *p, u_int code)
{
static const char unknown[] = "unknown";
struct sysentvec *sv;
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
sv = p->p_sysent;
if (sv->sv_syscallnames == NULL || code >= sv->sv_size)
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
return (unknown);
return (sv->sv_syscallnames[code]);
Reorganize syscall entry and leave handling. Extend struct sysvec with three new elements: sv_fetch_syscall_args - the method to fetch syscall arguments from usermode into struct syscall_args. The structure is machine-depended (this might be reconsidered after all architectures are converted). sv_set_syscall_retval - the method to set a return value for usermode from the syscall. It is a generalization of cpu_set_syscall_retval(9) to allow ABIs to override the way to set a return value. sv_syscallnames - the table of syscall names. Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding the call to cpu_set_syscall_retval(). The new functions syscallenter(9) and syscallret(9) are provided that use sv_*syscall* pointers and contain the common repeated code from the syscall() implementations for the architecture-specific syscall trap handlers. Syscallenter() fetches arguments, calls syscall implementation from ABI sysent table, and set up return frame. The end of syscall bookkeeping is done by syscallret(). Take advantage of single place for MI syscall handling code and implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the thread is stopped at syscall entry or return point respectively. The EXEC flag augments SCX and notifies debugger that the process address space was changed by one of exec(2)-family syscalls. The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are changed to use syscallenter()/syscallret(). MIPS and arm are not converted and use the mostly unchanged syscall() implementation. Reviewed by: jhb, marcel, marius, nwhitehorn, stas Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc), stas (mips) MFC after: 1 month
2010-05-23 18:32:02 +00:00
}