freebsd-nq/usr.sbin/config/config.h

223 lines
6.1 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1994-05-26 05:23:31 +00:00
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-26 05:23:31 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)config.h 8.1 (Berkeley) 6/6/93
* $FreeBSD$
1994-05-26 05:23:31 +00:00
*/
/*
* Config.
*/
#include <sys/types.h>
2003-02-15 02:26:13 +00:00
#include <sys/queue.h>
#include <stdbool.h>
1994-05-26 05:23:31 +00:00
#include <stdlib.h>
#include <string.h>
struct cfgfile {
STAILQ_ENTRY(cfgfile) cfg_next;
char *cfg_path;
};
extern STAILQ_HEAD(cfgfile_head, cfgfile) cfgfiles;
1994-05-26 05:23:31 +00:00
struct file_list {
2003-02-15 02:26:13 +00:00
STAILQ_ENTRY(file_list) f_next;
1994-05-26 05:23:31 +00:00
char *f_fn; /* the name */
int f_type; /* type */
1994-05-26 05:23:31 +00:00
u_char f_flags; /* see below */
char *f_compilewith; /* special make rule if present */
char *f_depends; /* additional dependencies */
char *f_clean; /* File list to add to clean rule */
char *f_warn; /* warning message */
const char *f_objprefix; /* prefix string for object name */
const char *f_srcprefix; /* source prefix such as $S/ */
1994-05-26 05:23:31 +00:00
};
struct files_name {
char *f_name;
STAILQ_ENTRY(files_name) f_next;
};
1994-05-26 05:23:31 +00:00
/*
* Types.
*/
#define NORMAL 1
#define NODEPEND 4
#define LOCAL 5
#define DEVDONE 0x80000000
#define TYPEMASK 0x7fffffff
1994-05-26 05:23:31 +00:00
/*
* Attributes (flags).
*/
#define NO_IMPLCT_RULE 1
#define NO_OBJ 2
#define BEFORE_DEPEND 4
#define NOWERROR 16
#define NO_CTFCONVERT 32
1994-05-26 05:23:31 +00:00
struct device {
int d_done; /* processed */
1994-05-26 05:23:31 +00:00
char *d_name; /* name of device (e.g. rk11) */
char *yyfile; /* name of the file that first include the device */
1994-05-26 05:23:31 +00:00
#define UNKNOWN -2 /* -2 means not set yet */
2003-02-15 02:26:13 +00:00
STAILQ_ENTRY(device) d_next; /* Next one in list */
1994-05-26 05:23:31 +00:00
};
struct config {
char *s_sysname;
};
/*
* Config has a global notion of which machine type is
* being used. It uses the name of the machine in choosing
* files and directories. Thus if the name of the machine is ``i386'',
* it will build from ``Makefile.i386'' and use ``../i386/inline''
* in the makerules, etc. machinearch is the global notion of the
* MACHINE_ARCH for this MACHINE.
1994-05-26 05:23:31 +00:00
*/
extern char *machinename;
extern char *machinearch;
1994-05-26 05:23:31 +00:00
/*
* For each machine, a set of CPU's may be specified as supported.
* These and the options (below) are put in the C flags in the makefile.
*/
struct cputype {
char *cpu_name;
2003-02-15 02:26:13 +00:00
SLIST_ENTRY(cputype) cpu_next;
};
extern SLIST_HEAD(cputype_head, cputype) cputype;
1994-05-26 05:23:31 +00:00
/*
* A set of options may also be specified which are like CPU types,
* but which may also specify values for the options.
* A separate set of options may be defined for make-style options.
*/
struct opt {
char *op_name;
char *op_value;
int op_ownfile; /* true = own file, false = makefile */
char *yyfile; /* name of the file that first include the option */
2003-02-15 02:26:13 +00:00
SLIST_ENTRY(opt) op_next;
SLIST_ENTRY(opt) op_append;
2003-02-15 02:26:13 +00:00
};
extern SLIST_HEAD(opt_head, opt) opt, mkopt, rmopts;
1994-05-26 05:23:31 +00:00
struct opt_list {
char *o_name;
char *o_file;
int o_flags;
#define OL_ALIAS 1
2003-02-15 02:26:13 +00:00
SLIST_ENTRY(opt_list) o_next;
};
extern SLIST_HEAD(opt_list_head, opt_list) otab;
struct envvar {
char *env_str;
bool env_is_file;
STAILQ_ENTRY(envvar) envvar_next;
};
extern STAILQ_HEAD(envvar_head, envvar) envvars;
struct hint {
char *hint_name;
STAILQ_ENTRY(hint) hint_next;
};
extern STAILQ_HEAD(hint_head, hint) hints;
struct includepath {
char *path;
SLIST_ENTRY(includepath) path_next;
};
extern SLIST_HEAD(includepath_head, includepath) includepath;
/*
2017-09-28 12:43:25 +00:00
* Tag present in the kernconf.tmpl template file. It's mandatory for those
* two strings to be the same. Otherwise you'll get into trouble.
*/
#define KERNCONFTAG "%%KERNCONFFILE%%"
/*
* Faked option to note, that the configuration file has been taken from the
* kernel file and inclusion of DEFAULTS etc.. isn't nessesery, because we
* already have a list of all required devices.
*/
#define OPT_AUTOGEN "CONFIG_AUTOGENERATED"
extern char *ident;
extern char kernconfstr[];
extern int do_trace;
extern int incignore;
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
char *get_word(FILE *);
char *get_quoted_word(FILE *);
char *path(const char *);
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
char *raisestr(char *);
void remember(const char *);
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
void moveifchanged(const char *, const char *);
int yylex(void);
void options(void);
void makefile(void);
void makeenv(void);
void makehints(void);
Borrow phk's axe and apply the next stage of config(8)'s evolution. Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
void headers(void);
void cfgfile_add(const char *);
void cfgfile_removeall(void);
FILE *open_makefile_template(void);
1994-05-26 05:23:31 +00:00
extern STAILQ_HEAD(device_head, device) dtab;
1994-05-26 05:23:31 +00:00
extern char errbuf[80];
extern int yyline;
extern const char *yyfile;
1994-05-26 05:23:31 +00:00
2003-02-15 02:26:13 +00:00
extern STAILQ_HEAD(file_list_head, file_list) ftab;
1994-05-26 05:23:31 +00:00
extern STAILQ_HEAD(files_name_head, files_name) fntab;
extern int debugging;
extern int found_defaults;
1994-05-26 05:23:31 +00:00
extern int maxusers;
extern int versreq;
1994-05-26 05:23:31 +00:00
extern char *PREFIX; /* Config file name - for error messages */
extern char srcdir[]; /* root of the kernel source tree */
1994-05-26 05:23:31 +00:00
#define eq(a,b) (!strcmp(a,b))
#define ns(s) strdup(s)