d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8df5e81c01
freebsd-nq/sys/ufs/ffs/ffs_alloc.c

2539 lines
68 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 02:29:27 +00:00
/*-
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Marshall
* Kirk McKusick and Network Associates Laboratories, the Security
* Research Division of Network Associates, Inc. under DARPA/SPAWAR
* contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
* research program
*
Explicitly break out NETA license from Berkeley license to clearly indicate license grant, as well as to indicate that NETA is asserting only two clauses, not four clauses. Requested by: imp
2004-10-20 08:05:02 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* @(#)ffs_alloc.c 8.18 (Berkeley) 5/26/95
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Use __FBSDID().
2003-06-11 06:34:30 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Convert QUOTA to new-style option.
1996-01-05 18:31:58 +00:00
#include "opt_quota.h"
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/buf.h>
Use devtoname() to print dev_t's instead of casting them to long or u_long for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
#include <sys/conf.h>
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
#include <sys/file.h>
When compiling the kernel do not implicitly include filedesc.h from proc.h, this was causing filedesc work to be very painful. In order to make this work split out sigio definitions to thier own header (sigio.h) which is included from proc.h for the time being.
2003-01-01 01:56:19 +00:00
#include <sys/filedesc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/mount.h>
Restored the "reallocblks" code to its former glory. What this does is basically do a on-the-fly defragmentation of the FFS filesystem, changing file block allocations to make them contiguous. Thanks to Kirk McKusick for providing hints on what needed to be done to get this working.
1998-11-13 01:01:44 +00:00
#include <sys/kernel.h>
Staticize.
1995-12-17 21:14:36 +00:00
#include <sys/sysctl.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/syslog.h>
Introduce extended attribute support for FFS, allowing arbitrary (name, value) pairs to be associated with inodes. This support is used for ACLs, MAC labels, and Capabilities in the TrustedBSD security extensions, which are currently under development. In this implementation, attributes are backed to data vnodes in the style of the quota support in FFS. Support for FFS extended attributes may be enabled using the FFS_EXTATTR kernel option (disabled by default). Userland utilities and man pages will be committed in the next batch. VFS interfaces and man pages have been in the repo since 4.0-RELEASE and are unchanged. o ufs/ufs/extattr.h: UFS-specific extattr defines o ufs/ufs/ufs_extattr.c: bulk of support routines o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes o contrib/softupdates/ffs_softdep.c: extattr.h includes o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h (This should not be the case, and will be fixed in a future commit) Currently attributes are not supported in MFS. This will be fixed. Reviewed by: adrian, bp, freebsd-fs, other unthanked souls Obtained from: TrustedBSD Project
2000-04-15 03:34:27 +00:00
#include <ufs/ufs/extattr.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <ufs/ufs/quota.h>
#include <ufs/ufs/inode.h>
Restored the "reallocblks" code to its former glory. What this does is basically do a on-the-fly defragmentation of the FFS filesystem, changing file block allocations to make them contiguous. Thanks to Kirk McKusick for providing hints on what needed to be done to get this working.
1998-11-13 01:01:44 +00:00
#include <ufs/ufs/ufs_extern.h>
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
#include <ufs/ufs/ufsmount.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <ufs/ffs/fs.h>
#include <ufs/ffs/ffs_extern.h>
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
typedef ufs2_daddr_t allocfcn_t(struct inode *ip, int cg, ufs2_daddr_t bpref,
Remove __P.
2002-03-19 22:40:48 +00:00
int size);
Completed function declarations and/or added prototypes and/or #includes to get the prototypes.
1995-12-03 11:17:15 +00:00
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t ffs_alloccg(struct inode *, int, ufs2_daddr_t, int);
static ufs2_daddr_t
ffs_alloccgblk(struct inode *, struct buf *, ufs2_daddr_t);
Staticized.
1997-11-22 08:35:46 +00:00
#ifdef DIAGNOSTIC
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int ffs_checkblk(struct inode *, ufs2_daddr_t, long);
Staticized.
1997-11-22 08:35:46 +00:00
#endif
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t ffs_clusteralloc(struct inode *, int, ufs2_daddr_t, int);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
static void ffs_clusteracct(struct ufsmount *, struct fs *, struct cg *,
ufs1_daddr_t, int);
Remove __P.
2002-03-19 22:40:48 +00:00
static ino_t ffs_dirpref(struct inode *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t ffs_fragextend(struct inode *, int, ufs2_daddr_t, int, int);
Remove __P.
2002-03-19 22:40:48 +00:00
static void ffs_fserr(struct fs *, ino_t, char *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t ffs_hashalloc
(struct inode *, int, ufs2_daddr_t, int, allocfcn_t *);
This patch fixes a problem whereby filesystems that ran out of inodes in a cylinder group would fail to check for free inodes in other cylinder groups. This bug was introduced in the UFS2 code merge two days ago. An inode is allocated by calling ffs_valloc which calls ffs_hashalloc to do the filesystem scan. Ffs_hashalloc walks around the cylinder groups calling its passed allocator (ffs_nodealloccg in this case) until the allocator returns a non-zero result. The bug is that ffs_hashalloc expects the passed allocator function to return a 64-bit ufs2_daddr_t. When allocating inodes, it calls ffs_nodealloccg which was returning a 32-bit ino_t. The ffs_hashalloc code checked a 64-bit return value and usually found random non-zero bits in the high 32-bits so decided that the allocation had succeeded (in this case in the only cylinder group that it checked). When the result was passed back to ffs_valloc it looked at only the bottom 32-bits, saw zero and declared the system out of inodes. But ffs_hashalloc had really only checked one cylinder group. The fix is to change ffs_nodealloccg to return 64-bit results. Sponsored by: DARPA & NAI Labs. Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk> Reviewed by: Maxime Henrion <mux@freebsd.org>
2002-06-22 21:24:58 +00:00
static ufs2_daddr_t ffs_nodealloccg(struct inode *, int, ufs2_daddr_t, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs1_daddr_t ffs_mapsearch(struct fs *, struct cg *, ufs2_daddr_t, int);
static int ffs_reallocblks_ufs1(struct vop_reallocblks_args *);
static int ffs_reallocblks_ufs2(struct vop_reallocblks_args *);
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
* Allocate a block in the filesystem.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* The size of the requested block is given, which must be some
* multiple of fs_fsize and <= fs_bsize.
* A preference may be optionally specified. If a preference is given
* the following hierarchy is used to allocate a block:
* 1) allocate the requested block.
* 2) allocate a rotationally optimal block in the same cylinder.
* 3) allocate a block in the same cylinder group.
* 4) quadradically rehash into other cylinder groups, until an
* available block is located.
* If no block preference is given the following heirarchy is used
* to allocate a block:
* 1) allocate a block in the cylinder group that contains the
* inode for the file.
* 2) quadradically rehash into other cylinder groups, until an
* available block is located.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_alloc(ip, lbn, bpref, size, cred, bnp)
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t lbn, bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int size;
struct ucred *cred;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t *bnp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bno;
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
int cg, reclaimed;
YF fix.
1995-02-14 06:14:28 +00:00
#ifdef QUOTA
int error;
#endif
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*bnp = 0;
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
mtx_assert(UFS_MTX(ump), MA_OWNED);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef DIAGNOSTIC
if ((u_int)size > fs->fs_bsize || fragoff(fs, size) != 0) {
Use devtoname() to print dev_t's instead of casting them to long or u_long for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
printf("dev = %s, bsize = %ld, size = %d, fs = %s\n",
devtoname(ip->i_dev), (long)fs->fs_bsize, size,
fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_alloc: bad size");
}
if (cred == NOCRED)
Removed redundant newlines that were in some panic strings.
1995-03-19 14:29:26 +00:00
panic("ffs_alloc: missing credential");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif /* DIAGNOSTIC */
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
reclaimed = 0;
retry:
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef QUOTA
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
error = chkdq(ip, btodb(size), cred, 0);
Cosmetics. make gcc less noisy. Still some way to go here.
1994-10-10 01:04:55 +00:00
if (error)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (error);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (size == fs->fs_bsize && fs->fs_cstotal.cs_nbfree == 0)
goto nospace;
if (suser_cred(cred, SUSER_ALLOWJAIL) &&
freespace(fs, fs->fs_minfree) - numfrags(fs, size) < 0)
goto nospace;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bpref >= fs->fs_size)
bpref = 0;
if (bpref == 0)
cg = ino_to_cg(fs, ip->i_number);
else
cg = dtog(fs, bpref);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bno = ffs_hashalloc(ip, cg, bpref, size, ffs_alloccg);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bno > 0) {
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + btodb(size));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
*bnp = bno;
return (0);
}
#ifdef QUOTA
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Restore user's disk quota because allocation failed.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(void) chkdq(ip, -btodb(size), cred, FORCE);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
nospace:
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
if (fs->fs_pendingblocks > 0 && reclaimed == 0) {
reclaimed = 1;
softdep_request_cleanup(fs, ITOV(ip));
goto retry;
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
ffs_fserr(fs, ip->i_number, "filesystem full");
uprintf("\n%s: write failed, filesystem is full\n", fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (ENOSPC);
}
/*
* Reallocate a fragment to a bigger size
*
* The number and size of the old block is given, and a preference
* and new size is also specified. The allocator attempts to extend
* the original block. Failing that, the regular block allocator is
* invoked to get an appropriate block.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ffs_realloccg(ip, lbprev, bprev, bpref, osize, nsize, cred, bpp)
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t lbprev;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ufs2_daddr_t bprev;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int osize, nsize;
struct ucred *cred;
struct buf **bpp;
{
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
struct vnode *vp;
struct fs *fs;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
int cg, request, error, reclaimed;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ufs2_daddr_t bno;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*bpp = 0;
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
vp = ITOV(ip);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
bp = NULL;
ump = ip->i_ump;
mtx_assert(UFS_MTX(ump), MA_OWNED);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef DIAGNOSTIC
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
if (vp->v_mount->mnt_kern_flag & MNTK_SUSPENDED)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
panic("ffs_realloccg: allocation on suspended filesystem");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((u_int)osize > fs->fs_bsize || fragoff(fs, osize) != 0 ||
(u_int)nsize > fs->fs_bsize || fragoff(fs, nsize) != 0) {
printf(
Use devtoname() to print dev_t's instead of casting them to long or u_long for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
"dev = %s, bsize = %ld, osize = %d, nsize = %d, fs = %s\n",
devtoname(ip->i_dev), (long)fs->fs_bsize, osize,
Fix -Wformat warnings from LINT kernel.
1995-05-11 19:26:53 +00:00
nsize, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_realloccg: bad size");
}
if (cred == NOCRED)
Removed redundant newlines that were in some panic strings.
1995-03-19 14:29:26 +00:00
panic("ffs_realloccg: missing credential");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif /* DIAGNOSTIC */
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
reclaimed = 0;
retry:
Rename suser_cred()'s PRISON_ROOT flag to SUSER_ALLOWJAIL. This is somewhat clearer, but more importantly allows for a consistent naming scheme for suser_cred flags. The old name is still defined, but will be removed in a few days (unless I hear any complaints...) Discussed with: rwatson, scottl Requested by: jhb
2004-07-26 07:24:04 +00:00
if (suser_cred(cred, SUSER_ALLOWJAIL) &&
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
freespace(fs, fs->fs_minfree) - numfrags(fs, nsize - osize) < 0) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto nospace;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (bprev == 0) {
Warning fixes for 64 bits platforms. This eliminates all the warnings I have had in the FFS code on sparc64. Reviewed by: mckusick
2002-06-23 18:17:27 +00:00
printf("dev = %s, bsize = %ld, bprev = %jd, fs = %s\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
devtoname(ip->i_dev), (long)fs->fs_bsize, (intmax_t)bprev,
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_realloccg: bad bprev");
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Allocate the extra space in the buffer.
*/
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
error = bread(vp, lbprev, osize, NOCRED, &bp);
Cosmetics. make gcc less noisy. Still some way to go here.
1994-10-10 01:04:55 +00:00
if (error) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(bp);
return (error);
}
Fixes from John Dyson to work around vnode lock hang. Basically, remove the VOP_BMAP calls, and add one to bdwrite. Submitted by: John Dyson
1995-03-03 22:13:16 +00:00
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (bp->b_blkno == bp->b_lblkno) {
if (lbprev >= NDADDR)
Fixes from John Dyson to work around vnode lock hang. Basically, remove the VOP_BMAP calls, and add one to bdwrite. Submitted by: John Dyson
1995-03-03 22:13:16 +00:00
panic("ffs_realloccg: lbprev out of range");
bp->b_blkno = fsbtodb(fs, bprev);
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef QUOTA
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
error = chkdq(ip, btodb(nsize - osize), cred, 0);
Cosmetics. make gcc less noisy. Still some way to go here.
1994-10-10 01:04:55 +00:00
if (error) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(bp);
return (error);
}
#endif
/*
* Check for extension in the existing location.
*/
cg = dtog(fs, bprev);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bno = ffs_fragextend(ip, cg, bprev, osize, nsize);
Cosmetics. make gcc less noisy. Still some way to go here.
1994-10-10 01:04:55 +00:00
if (bno) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bp->b_blkno != fsbtodb(fs, bno))
Update a number of panic messages to reflect the actual name of the routine that caused the panic.
1997-03-09 06:00:44 +00:00
panic("ffs_realloccg: bad blockno");
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + btodb(nsize - osize));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
Removed third arg (vmio) to allocbuf() that was added with the original merged cache changes, and figure it out based on the B_VMIO buffer flag. Fixes a problem where delayed write VMIO buffers would sometimes get recopied into kernel-alloced memory. Submitted by: John Dyson
1995-03-26 23:29:13 +00:00
allocbuf(bp, nsize);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_flags |= B_DONE;
Change ffs_realloccg() to set the valid bits for the extended part of the fragment to zero the valid parts of a VM_IO buffer. RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately. Reviewed by: alc, tegge
2004-05-14 22:00:08 +00:00
if ((bp->b_flags & (B_MALLOC | B_VMIO)) != B_VMIO)
Style fixup in previous commit. Noticed by: bde (thanks!)
2004-05-19 18:06:21 +00:00
bzero((char *)bp->b_data + osize, nsize - osize);
Change ffs_realloccg() to set the valid bits for the extended part of the fragment to zero the valid parts of a VM_IO buffer. RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately. Reviewed by: alc, tegge
2004-05-14 22:00:08 +00:00
else
vfs_bio_clrbuf(bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*bpp = bp;
return (0);
}
/*
* Allocate a new disk location.
*/
if (bpref >= fs->fs_size)
bpref = 0;
switch ((int)fs->fs_optim) {
case FS_OPTSPACE:
/*
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* Allocate an exact sized fragment. Although this makes
* best use of space, we will waste time relocating it if
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* the file continues to grow. If the fragmentation is
* less than half of the minimum free reserve, we choose
* to begin optimizing for time.
*/
request = nsize;
The threshold for switching from time-space and space-time is too small when minfree is 5%...so make it stay at space in this case. Submitted by: Kirk McKusick
1995-03-10 22:11:50 +00:00
if (fs->fs_minfree <= 5 ||
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs->fs_cstotal.cs_nffree >
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
(off_t)fs->fs_dsize * fs->fs_minfree / (2 * 100))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
log(LOG_NOTICE, "%s: optimization changed from SPACE to TIME\n",
fs->fs_fsmnt);
fs->fs_optim = FS_OPTTIME;
break;
case FS_OPTTIME:
/*
* At this point we have discovered a file that is trying to
* grow a small fragment to a larger fragment. To save time,
* we allocate a full sized block, then free the unused portion.
* If the file continues to grow, the `ffs_fragextend' call
* above will be able to grow it in place without further
* copying. If aberrant programs cause disk fragmentation to
* grow within 2% of the free reserve, we choose to begin
* optimizing for space.
*/
request = fs->fs_bsize;
if (fs->fs_cstotal.cs_nffree <
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
(off_t)fs->fs_dsize * (fs->fs_minfree - 2) / 100)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
log(LOG_NOTICE, "%s: optimization changed from TIME to SPACE\n",
fs->fs_fsmnt);
fs->fs_optim = FS_OPTSPACE;
break;
default:
Use devtoname() to print dev_t's instead of casting them to long or u_long for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
printf("dev = %s, optim = %ld, fs = %s\n",
devtoname(ip->i_dev), (long)fs->fs_optim, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_realloccg: bad optim");
/* NOTREACHED */
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bno = ffs_hashalloc(ip, cg, bpref, request, ffs_alloccg);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bno > 0) {
bp->b_blkno = fsbtodb(fs, bno);
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
if (!DOINGSOFTDEP(vp))
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, ip->i_devvp, bprev, (long)osize,
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ip->i_number);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (nsize < request)
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, ip->i_devvp,
bno + numfrags(fs, nsize),
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
(long)(request - nsize), ip->i_number);
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + btodb(nsize - osize));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
Removed third arg (vmio) to allocbuf() that was added with the original merged cache changes, and figure it out based on the B_VMIO buffer flag. Fixes a problem where delayed write VMIO buffers would sometimes get recopied into kernel-alloced memory. Submitted by: John Dyson
1995-03-26 23:29:13 +00:00
allocbuf(bp, nsize);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_flags |= B_DONE;
Change ffs_realloccg() to set the valid bits for the extended part of the fragment to zero the valid parts of a VM_IO buffer. RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately. Reviewed by: alc, tegge
2004-05-14 22:00:08 +00:00
if ((bp->b_flags & (B_MALLOC | B_VMIO)) != B_VMIO)
Style fixup in previous commit. Noticed by: bde (thanks!)
2004-05-19 18:06:21 +00:00
bzero((char *)bp->b_data + osize, nsize - osize);
Change ffs_realloccg() to set the valid bits for the extended part of the fragment to zero the valid parts of a VM_IO buffer. RE would like this to be part of 4.10-RC3 so this will be MFC-ed immediately. Reviewed by: alc, tegge
2004-05-14 22:00:08 +00:00
else
vfs_bio_clrbuf(bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*bpp = bp;
return (0);
}
#ifdef QUOTA
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Restore user's disk quota because allocation failed.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(void) chkdq(ip, -btodb(nsize - osize), cred, FORCE);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
nospace:
/*
* no space available
*/
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
if (fs->fs_pendingblocks > 0 && reclaimed == 0) {
reclaimed = 1;
softdep_request_cleanup(fs, vp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
if (bp)
brelse(bp);
UFS_LOCK(ump);
This patch fixes a long standing complaint with soft updates in which small and/or nearly full filesystems would fail with `file system full' messages when trying to replace a number of existing files (for example during a system installation). When the allocation routines are about to fail with a file system full condition, they make a call to softdep_request_cleanup() which attempts to accelerate the flushing of pending deletion requests in an effort to free up space. In the face of filesystem I/O requests that exceed the available disk transfer capacity, the cleanup request could take an unbounded amount of time. Thus, the softdep_request_cleanup() routine will only try for tickdelay seconds (default 2 seconds) before giving up and returning a filesystem full error. Under typical conditions, the softdep_request_cleanup() routine is able to free up space in under fifty milliseconds.
2002-01-22 06:17:22 +00:00
goto retry;
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
if (bp)
brelse(bp);
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
ffs_fserr(fs, ip->i_number, "filesystem full");
uprintf("\n%s: write failed, filesystem is full\n", fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (ENOSPC);
}
/*
* Reallocate a sequence of blocks into a contiguous sequence of blocks.
*
* The vnode and an array of buffer pointers for a range of sequential
* logical blocks to be made contiguous is given. The allocator attempts
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* to find a range of sequential blocks starting as close as possible
* from the end of the allocation for the logical block immediately
* preceding the current range. If successful, the physical block numbers
* in the buffer pointers and in the inode are changed to reflect the new
* allocation. If unsuccessful, the allocation is left unchanged. The
* success in doing the reallocation is returned. Note that the error
* return is not reflected back to the user. Rather the previous block
* allocation will be used.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
SYSCTL_NODE(_vfs, OID_AUTO, ffs, CTLFLAG_RW, 0, "FFS filesystem");
Staticize.
1995-12-17 21:14:36 +00:00
static int doasyncfree = 1;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
SYSCTL_INT(_vfs_ffs, OID_AUTO, doasyncfree, CTLFLAG_RW, &doasyncfree, 0, "");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Staticized.
1997-11-22 08:35:46 +00:00
static int doreallocblks = 1;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
SYSCTL_INT(_vfs_ffs, OID_AUTO, doreallocblks, CTLFLAG_RW, &doreallocblks, 0, "");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Ifdefed the conditionally used variable `prtrealloc'. Declare it as volatile so that there is no chance that the code that it controls is optimised away.
1999-01-06 17:04:33 +00:00
#ifdef DEBUG
static volatile int prtrealloc = 0;
#endif
Unremoved prtrealloc and the declaration of ffs_clusteralloc(). These are used in the `#ifdef notyet' case :-). This case is used except in the `#if !defined (not_yes)' case :-|. This has something to do with the `#ifdef notyet_block_reallocation_enabled' case in vfs_cluster.c :-(.
1997-11-22 07:00:40 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int
ffs_reallocblks(ap)
struct vop_reallocblks_args /* {
struct vnode *a_vp;
struct cluster_save *a_buflist;
} */ *ap;
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (doreallocblks == 0)
return (ENOSPC);
if (VTOI(ap->a_vp)->i_ump->um_fstype == UFS1)
return (ffs_reallocblks_ufs1(ap));
return (ffs_reallocblks_ufs2(ap));
}
static int
ffs_reallocblks_ufs1(ap)
struct vop_reallocblks_args /* {
struct vnode *a_vp;
struct cluster_save *a_buflist;
} */ *ap;
{
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct fs *fs;
struct inode *ip;
struct vnode *vp;
struct buf *sbp, *ebp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t *bap, *sbap, *ebap = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct cluster_save *buflist;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t start_lbn, end_lbn;
ufs1_daddr_t soff, newblk, blkno;
ufs2_daddr_t pref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct indir start_ap[NIADDR + 1], end_ap[NIADDR + 1], *idp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, len, start_lvl, end_lvl, ssize;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp = ap->a_vp;
ip = VTOI(vp);
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (fs->fs_contigsumsize <= 0)
return (ENOSPC);
buflist = ap->a_buflist;
len = buflist->bs_nchildren;
start_lbn = buflist->bs_children[0]->b_lblkno;
end_lbn = start_lbn + len - 1;
#ifdef DIAGNOSTIC
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
for (i = 0; i < len; i++)
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 1");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 1; i < len; i++)
if (buflist->bs_children[i]->b_lblkno != start_lbn + i)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
panic("ffs_reallocblks: non-logical cluster");
blkno = buflist->bs_children[0]->b_blkno;
ssize = fsbtodb(fs, fs->fs_frag);
for (i = 1; i < len - 1; i++)
if (buflist->bs_children[i]->b_blkno != blkno + (i * ssize))
panic("ffs_reallocblks: non-physical cluster %d", i);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
/*
* If the latest allocation is in a new cylinder group, assume that
* the filesystem has decided to move and do not force it back to
* the previous cylinder group.
*/
if (dtog(fs, dbtofsb(fs, buflist->bs_children[0]->b_blkno)) !=
dtog(fs, dbtofsb(fs, buflist->bs_children[len - 1]->b_blkno)))
return (ENOSPC);
if (ufs_getlbns(vp, start_lbn, start_ap, &start_lvl) ||
ufs_getlbns(vp, end_lbn, end_ap, &end_lvl))
return (ENOSPC);
/*
* Get the starting offset and block map for the first block.
*/
if (start_lvl == 0) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
sbap = &ip->i_din1->di_db[0];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
soff = start_lbn;
} else {
idp = &start_ap[start_lvl - 1];
if (bread(vp, idp->in_lbn, (int)fs->fs_bsize, NOCRED, &sbp)) {
brelse(sbp);
return (ENOSPC);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
sbap = (ufs1_daddr_t *)sbp->b_data;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
soff = idp->in_off;
}
/*
* If the block range spans two block maps, get the second map.
*/
if (end_lvl == 0 || (idp = &end_ap[end_lvl - 1])->in_off + 1 >= len) {
ssize = len;
} else {
#ifdef DIAGNOSTIC
if (start_ap[start_lvl-1].in_lbn == idp->in_lbn)
panic("ffs_reallocblk: start == end");
#endif
ssize = len - (idp->in_off + 1);
if (bread(vp, idp->in_lbn, (int)fs->fs_bsize, NOCRED, &ebp))
goto fail;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ebap = (ufs1_daddr_t *)ebp->b_data;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
/*
* Find the preferred location for the cluster.
*/
UFS_LOCK(ump);
pref = ffs_blkpref_ufs1(ip, start_lbn, soff, sbap);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Search the block map looking for an allocation of the desired size.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((newblk = ffs_hashalloc(ip, dtog(fs, pref), pref,
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
len, ffs_clusteralloc)) == 0) {
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto fail;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* We have found a new contiguous block.
*
* First we have to replace the old block pointers with the new
* block pointers in the inode and indirect blocks associated
* with the file.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#ifdef DEBUG
if (prtrealloc)
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf("realloc: ino %d, lbns %jd-%jd\n\told:", ip->i_number,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)start_lbn, (intmax_t)end_lbn);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
blkno = newblk;
for (bap = &sbap[soff], i = 0; i < len; i++, blkno += fs->fs_frag) {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (i == ssize) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bap = ebap;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
soff = -i;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef DIAGNOSTIC
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 2");
if (dbtofsb(fs, buflist->bs_children[i]->b_blkno) != *bap)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_reallocblks: alloc mismatch");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#endif
#ifdef DEBUG
if (prtrealloc)
printf(" %d,", *bap);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (DOINGSOFTDEP(vp)) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sbap == &ip->i_din1->di_db[0] && i < ssize)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
softdep_setup_allocdirect(ip, start_lbn + i,
blkno, *bap, fs->fs_bsize, fs->fs_bsize,
buflist->bs_children[i]);
else
softdep_setup_allocindir_page(ip, start_lbn + i,
i < ssize ? sbp : ebp, soff + i, blkno,
*bap, buflist->bs_children[i]);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*bap++ = blkno;
}
/*
* Next we must write out the modified inode and indirect blocks.
* For strict correctness, the writes should be synchronous since
* the old block values may have been written to disk. In practise
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* they are almost never written, but if we are concerned about
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* strict correctness, the `doasyncfree' flag should be set to zero.
*
* The test on `doasyncfree' should be changed to test a flag
* that shows whether the associated buffers and inodes have
* been written. The flag should be set when the cluster is
* started and cleared whenever the buffer or inode is flushed.
* We can then check below to see if it is set, and do the
* synchronous write only when it has been cleared.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sbap != &ip->i_din1->di_db[0]) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (doasyncfree)
bdwrite(sbp);
else
bwrite(sbp);
} else {
ip->i_flag |= IN_CHANGE | IN_UPDATE;
Don't pass unused unused timestamp args to UFS_UPDATE() or waste time initializing them. This almost finishes centralizing (in-core) timestamp updates in ufs_itimes().
1999-01-07 16:14:19 +00:00
if (!doasyncfree)
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
ffs_update(vp, 1);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add sufficient braces to keep egcs happy about potentially ambiguous if/else nesting.
1999-05-06 18:13:11 +00:00
if (ssize < len) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (doasyncfree)
bdwrite(ebp);
else
bwrite(ebp);
Add sufficient braces to keep egcs happy about potentially ambiguous if/else nesting.
1999-05-06 18:13:11 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Last, free the old blocks and assign the new blocks to the buffers.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#ifdef DEBUG
if (prtrealloc)
printf("\n\tnew:");
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (blkno = newblk, i = 0; i < len; i++, blkno += fs->fs_frag) {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (!DOINGSOFTDEP(vp))
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, ip->i_devvp,
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
dbtofsb(fs, buflist->bs_children[i]->b_blkno),
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
fs->fs_bsize, ip->i_number);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
buflist->bs_children[i]->b_blkno = fsbtodb(fs, blkno);
Fix bug introduced in rev 1.28, which causes kernel build to break for the case where DEBUG is defined but not DIAGNOSTIC. ffs_checkblk is declared conditionally on DIAGNOSTIC, not DEBUG. PR: 13314 Reviewed by: bde
1999-08-24 08:39:41 +00:00
#ifdef DIAGNOSTIC
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 3");
Fix bug introduced in rev 1.28, which causes kernel build to break for the case where DEBUG is defined but not DIAGNOSTIC. ffs_checkblk is declared conditionally on DIAGNOSTIC, not DEBUG. PR: 13314 Reviewed by: bde
1999-08-24 08:39:41 +00:00
#endif
#ifdef DEBUG
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (prtrealloc)
printf(" %d,", blkno);
#endif
}
#ifdef DEBUG
if (prtrealloc) {
prtrealloc--;
printf("\n");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
fail:
if (ssize < len)
brelse(ebp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sbap != &ip->i_din1->di_db[0])
brelse(sbp);
return (ENOSPC);
}
static int
ffs_reallocblks_ufs2(ap)
struct vop_reallocblks_args /* {
struct vnode *a_vp;
struct cluster_save *a_buflist;
} */ *ap;
{
struct fs *fs;
struct inode *ip;
struct vnode *vp;
struct buf *sbp, *ebp;
ufs2_daddr_t *bap, *sbap, *ebap = 0;
struct cluster_save *buflist;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t start_lbn, end_lbn;
ufs2_daddr_t soff, newblk, blkno, pref;
struct indir start_ap[NIADDR + 1], end_ap[NIADDR + 1], *idp;
int i, len, start_lvl, end_lvl, ssize;
vp = ap->a_vp;
ip = VTOI(vp);
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_contigsumsize <= 0)
return (ENOSPC);
buflist = ap->a_buflist;
len = buflist->bs_nchildren;
start_lbn = buflist->bs_children[0]->b_lblkno;
end_lbn = start_lbn + len - 1;
#ifdef DIAGNOSTIC
for (i = 0; i < len; i++)
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 1");
for (i = 1; i < len; i++)
if (buflist->bs_children[i]->b_lblkno != start_lbn + i)
panic("ffs_reallocblks: non-logical cluster");
blkno = buflist->bs_children[0]->b_blkno;
ssize = fsbtodb(fs, fs->fs_frag);
for (i = 1; i < len - 1; i++)
if (buflist->bs_children[i]->b_blkno != blkno + (i * ssize))
panic("ffs_reallocblks: non-physical cluster %d", i);
#endif
/*
* If the latest allocation is in a new cylinder group, assume that
* the filesystem has decided to move and do not force it back to
* the previous cylinder group.
*/
if (dtog(fs, dbtofsb(fs, buflist->bs_children[0]->b_blkno)) !=
dtog(fs, dbtofsb(fs, buflist->bs_children[len - 1]->b_blkno)))
return (ENOSPC);
if (ufs_getlbns(vp, start_lbn, start_ap, &start_lvl) ||
ufs_getlbns(vp, end_lbn, end_ap, &end_lvl))
return (ENOSPC);
/*
* Get the starting offset and block map for the first block.
*/
if (start_lvl == 0) {
sbap = &ip->i_din2->di_db[0];
soff = start_lbn;
} else {
idp = &start_ap[start_lvl - 1];
if (bread(vp, idp->in_lbn, (int)fs->fs_bsize, NOCRED, &sbp)) {
brelse(sbp);
return (ENOSPC);
}
sbap = (ufs2_daddr_t *)sbp->b_data;
soff = idp->in_off;
}
/*
* If the block range spans two block maps, get the second map.
*/
if (end_lvl == 0 || (idp = &end_ap[end_lvl - 1])->in_off + 1 >= len) {
ssize = len;
} else {
#ifdef DIAGNOSTIC
if (start_ap[start_lvl-1].in_lbn == idp->in_lbn)
panic("ffs_reallocblk: start == end");
#endif
ssize = len - (idp->in_off + 1);
if (bread(vp, idp->in_lbn, (int)fs->fs_bsize, NOCRED, &ebp))
goto fail;
ebap = (ufs2_daddr_t *)ebp->b_data;
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
/*
* Find the preferred location for the cluster.
*/
UFS_LOCK(ump);
pref = ffs_blkpref_ufs2(ip, start_lbn, soff, sbap);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* Search the block map looking for an allocation of the desired size.
*/
if ((newblk = ffs_hashalloc(ip, dtog(fs, pref), pref,
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
len, ffs_clusteralloc)) == 0) {
UFS_UNLOCK(ump);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
goto fail;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* We have found a new contiguous block.
*
* First we have to replace the old block pointers with the new
* block pointers in the inode and indirect blocks associated
* with the file.
*/
#ifdef DEBUG
if (prtrealloc)
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf("realloc: ino %d, lbns %jd-%jd\n\told:", ip->i_number,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)start_lbn, (intmax_t)end_lbn);
#endif
blkno = newblk;
for (bap = &sbap[soff], i = 0; i < len; i++, blkno += fs->fs_frag) {
if (i == ssize) {
bap = ebap;
soff = -i;
}
#ifdef DIAGNOSTIC
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 2");
if (dbtofsb(fs, buflist->bs_children[i]->b_blkno) != *bap)
panic("ffs_reallocblks: alloc mismatch");
#endif
#ifdef DEBUG
if (prtrealloc)
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf(" %jd,", (intmax_t)*bap);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
#endif
if (DOINGSOFTDEP(vp)) {
if (sbap == &ip->i_din2->di_db[0] && i < ssize)
softdep_setup_allocdirect(ip, start_lbn + i,
blkno, *bap, fs->fs_bsize, fs->fs_bsize,
buflist->bs_children[i]);
else
softdep_setup_allocindir_page(ip, start_lbn + i,
i < ssize ? sbp : ebp, soff + i, blkno,
*bap, buflist->bs_children[i]);
}
*bap++ = blkno;
}
/*
* Next we must write out the modified inode and indirect blocks.
* For strict correctness, the writes should be synchronous since
* the old block values may have been written to disk. In practise
* they are almost never written, but if we are concerned about
* strict correctness, the `doasyncfree' flag should be set to zero.
*
* The test on `doasyncfree' should be changed to test a flag
* that shows whether the associated buffers and inodes have
* been written. The flag should be set when the cluster is
* started and cleared whenever the buffer or inode is flushed.
* We can then check below to see if it is set, and do the
* synchronous write only when it has been cleared.
*/
if (sbap != &ip->i_din2->di_db[0]) {
if (doasyncfree)
bdwrite(sbp);
else
bwrite(sbp);
} else {
ip->i_flag |= IN_CHANGE | IN_UPDATE;
if (!doasyncfree)
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
ffs_update(vp, 1);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
if (ssize < len) {
if (doasyncfree)
bdwrite(ebp);
else
bwrite(ebp);
}
/*
* Last, free the old blocks and assign the new blocks to the buffers.
*/
#ifdef DEBUG
if (prtrealloc)
printf("\n\tnew:");
#endif
for (blkno = newblk, i = 0; i < len; i++, blkno += fs->fs_frag) {
if (!DOINGSOFTDEP(vp))
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, ip->i_devvp,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dbtofsb(fs, buflist->bs_children[i]->b_blkno),
fs->fs_bsize, ip->i_number);
buflist->bs_children[i]->b_blkno = fsbtodb(fs, blkno);
#ifdef DIAGNOSTIC
if (!ffs_checkblk(ip,
dbtofsb(fs, buflist->bs_children[i]->b_blkno), fs->fs_bsize))
panic("ffs_reallocblks: unallocated block 3");
#endif
#ifdef DEBUG
if (prtrealloc)
Fixed some printf format errors (4 new ones reported by gcc and 5 nearby old ones not reported by gcc). This helps unbreak LINT.
2002-07-08 12:42:29 +00:00
printf(" %jd,", (intmax_t)blkno);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
#endif
}
#ifdef DEBUG
if (prtrealloc) {
prtrealloc--;
printf("\n");
}
#endif
return (0);
fail:
if (ssize < len)
brelse(ebp);
if (sbap != &ip->i_din2->di_db[0])
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(sbp);
return (ENOSPC);
}
/*
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
* Allocate an inode in the filesystem.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* If allocating a directory, use ffs_dirpref to select the inode.
* If allocating in a directory, the following hierarchy is followed:
* 1) allocate the preferred inode.
* 2) allocate an inode in the same cylinder group.
* 3) quadradically rehash into other cylinder groups, until an
* available inode is located.
* If no inode preference is given the following heirarchy is used
* to allocate an inode:
* 1) allocate an inode in cylinder group 0.
* 2) quadradically rehash into other cylinder groups, until an
* available inode is located.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
ffs_valloc(pvp, mode, cred, vpp)
struct vnode *pvp;
int mode;
struct ucred *cred;
struct vnode **vpp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct inode *pip;
struct fs *fs;
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct timespec ts;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ino_t ino, ipref;
int cg, error;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
*vpp = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
pip = VTOI(pvp);
fs = pip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = pip->i_ump;
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (fs->fs_cstotal.cs_nifree == 0)
goto noinodes;
if ((mode & IFMT) == IFDIR)
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
ipref = ffs_dirpref(pip);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
else
ipref = pip->i_number;
Cosmetic cleanup of unsigned buglets. Submitted by: Bruce Evans <bde@zeta.org.au> Sponsored by: DARPA & NAI Labs.
2002-12-18 00:53:45 +00:00
if (ipref >= fs->fs_ncg * fs->fs_ipg)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipref = 0;
cg = ino_to_cg(fs, ipref);
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
/*
* Track number of dirs created one after another
* in a same cg without intervening by files.
*/
if ((mode & IFMT) == IFDIR) {
if (fs->fs_contigdirs[cg] < 255)
fs->fs_contigdirs[cg]++;
} else {
if (fs->fs_contigdirs[cg] > 0)
fs->fs_contigdirs[cg]--;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ino = (ino_t)ffs_hashalloc(pip, cg, ipref, mode,
Silence a harmless warning...
1995-12-15 03:36:25 +00:00
(allocfcn_t *)ffs_nodealloccg);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ino == 0)
goto noinodes;
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_vget(pvp->v_mount, ino, LK_EXCLUSIVE, vpp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (error) {
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
ffs_vfree(pvp, ino, mode);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (error);
}
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
ip = VTOI(*vpp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ip->i_mode) {
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
printf("mode = 0%o, inum = %lu, fs = %s\n",
ip->i_mode, (u_long)ip->i_number, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_valloc: dup alloc");
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(ip, i_blocks) && (fs->fs_flags & FS_UNCLEAN) == 0) { /* XXX */
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
printf("free inode %s/%lu had %ld blocks\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs->fs_fsmnt, (u_long)ino, (long)DIP(ip, i_blocks));
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
ip->i_flags = 0;
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_flags, 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Set up a new generation number for this inode.
*/
Fix a small style bug in the generation number change (rev.1.33) before copying the change to other fs's.
1997-12-02 11:21:16 +00:00
if (ip->i_gen == 0 || ++ip->i_gen == 0)
Replace use of random() with arc4random() to provide less guessable values for the initial inode generation numbers in newfs and for newly allocated inode generation numbers in the kernel. Submitted by: Theo de Raadt <deraadt@cvs.openbsd.org> Sponsored by: DARPA & NAI Labs.
2003-02-14 21:31:58 +00:00
ip->i_gen = arc4random() / 2 + 1;
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_gen, ip->i_gen);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS2_MAGIC) {
vfs_timestamp(&ts);
Change the name of st_createtime to st_birthtime. This change is made to reduce confusion between st_ctime and st_createtime. Submitted by: Eric Allman <eric@sendmail.org> Sponsored by: DARPA & NAI Labs.
2002-07-16 22:36:00 +00:00
ip->i_din2->di_birthtime = ts.tv_sec;
ip->i_din2->di_birthnsec = ts.tv_nsec;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
Initialize the inode i_flag field in ffs_valloc() to clean up any stale flag bits left over from before the inode was recycled. Without this change, a leftover IN_SPACECOUNTED flag could prevent softdep_freefile() and softdep_releasefile() from incrementing fs_pendinginodes. Because handle_workitem_freefile() unconditionally decrements fs_pendinginodes, a negative value could be reported at file system unmount time with a message like: unmount pending error: blocks 0 files -3 The pending block count in fs_pendingblocks could also be negative for similar reasons. These errors can cause the data returned by statfs() to be slightly incorrect. Some other cleanup code in softdep_releasefile() could also be incorrectly bypassed. MFC after: 3 days
2005-10-03 21:57:43 +00:00
ip->i_flag = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
noinodes:
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_fserr(fs, pip->i_number, "out of inodes");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
uprintf("\n%s: create/symlink failed, no inodes free\n", fs->fs_fsmnt);
return (ENOSPC);
}
/*
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
* Find a cylinder group to place a directory.
*
* The policy implemented by this algorithm is to allocate a
* directory inode in the same cylinder group as its parent
* directory, but also to reserve space for its files inodes
* and data. Restrict the number of directories which may be
* allocated one after another in the same cylinder group
* without intervening allocation of files.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
* If we allocate a first level directory then force allocation
* in another cylinder group.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
static ino_t
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
ffs_dirpref(pip)
struct inode *pip;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
int cg, prefcg, dirsize, cgsize;
int avgifree, avgbfree, avgndir, curdirsize;
int minifree, minbfree, maxndir;
int mincg, minndir;
int maxcontigdirs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
mtx_assert(UFS_MTX(pip->i_ump), MA_OWNED);
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
fs = pip->i_fs;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
avgifree = fs->fs_cstotal.cs_nifree / fs->fs_ncg;
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
avgbfree = fs->fs_cstotal.cs_nbfree / fs->fs_ncg;
avgndir = fs->fs_cstotal.cs_ndir / fs->fs_ncg;
/*
* Force allocation in another cg if creating a first level dir.
*/
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
ASSERT_VOP_LOCKED(ITOV(pip), "ffs_dirpref");
if (ITOV(pip)->v_vflag & VV_ROOT) {
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
prefcg = arc4random() % fs->fs_ncg;
mincg = prefcg;
minndir = fs->fs_ipg;
for (cg = prefcg; cg < fs->fs_ncg; cg++)
if (fs->fs_cs(fs, cg).cs_ndir < minndir &&
fs->fs_cs(fs, cg).cs_nifree >= avgifree &&
fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
mincg = cg;
minndir = fs->fs_cs(fs, cg).cs_ndir;
}
for (cg = 0; cg < prefcg; cg++)
if (fs->fs_cs(fs, cg).cs_ndir < minndir &&
fs->fs_cs(fs, cg).cs_nifree >= avgifree &&
fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
mincg = cg;
minndir = fs->fs_cs(fs, cg).cs_ndir;
}
return ((ino_t)(fs->fs_ipg * mincg));
}
/*
* Count various limits which used for
* optimal allocation of a directory inode.
*/
maxndir = min(avgndir + fs->fs_ipg / 16, fs->fs_ipg);
Tweak the calculation of minbfree in ffs_dirpref() so that only those cylinder groups that have at least 75% of the average free space per cylinder group for that file system are considered as candidates for the creation of a new directory. The previous formula for minbfree would set it to zero if the file system was more than 75% full, which allowed cylinder groups with no free space at all to be chosen as candidates for directory creation, which resulted in an expensive search for free blocks for each file that was subsequently created in that directory. Modify the calculation of minifree in the same way. Decrease maxcontigdirs as the file system fills to decrease the likelyhood that a cluster of directories will overflow the available space in a cylinder group. Reviewed by: mckusick Tested by: kmarx@vicor.com MFC after: 2 weeks
2003-10-31 07:25:06 +00:00
minifree = avgifree - avgifree / 4;
if (minifree < 1)
minifree = 1;
minbfree = avgbfree - avgbfree / 4;
if (minbfree < 1)
minbfree = 1;
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
cgsize = fs->fs_fsize * fs->fs_fpg;
dirsize = fs->fs_avgfilesize * fs->fs_avgfpdir;
curdirsize = avgndir ? (cgsize - avgbfree * fs->fs_bsize) / avgndir : 0;
if (dirsize < curdirsize)
dirsize = curdirsize;
Tweak the calculation of minbfree in ffs_dirpref() so that only those cylinder groups that have at least 75% of the average free space per cylinder group for that file system are considered as candidates for the creation of a new directory. The previous formula for minbfree would set it to zero if the file system was more than 75% full, which allowed cylinder groups with no free space at all to be chosen as candidates for directory creation, which resulted in an expensive search for free blocks for each file that was subsequently created in that directory. Modify the calculation of minifree in the same way. Decrease maxcontigdirs as the file system fills to decrease the likelyhood that a cluster of directories will overflow the available space in a cylinder group. Reviewed by: mckusick Tested by: kmarx@vicor.com MFC after: 2 weeks
2003-10-31 07:25:06 +00:00
maxcontigdirs = min((avgbfree * fs->fs_bsize) / dirsize, 255);
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
if (fs->fs_avgfpdir > 0)
maxcontigdirs = min(maxcontigdirs,
fs->fs_ipg / fs->fs_avgfpdir);
if (maxcontigdirs == 0)
maxcontigdirs = 1;
/*
* Limit number of dirs in one cg and reserve space for
* regular files, but only if we have no deficit in
* inodes or space.
*/
prefcg = ino_to_cg(fs, pip->i_number);
for (cg = prefcg; cg < fs->fs_ncg; cg++)
if (fs->fs_cs(fs, cg).cs_ndir < maxndir &&
fs->fs_cs(fs, cg).cs_nifree >= minifree &&
fs->fs_cs(fs, cg).cs_nbfree >= minbfree) {
if (fs->fs_contigdirs[cg] < maxcontigdirs)
return ((ino_t)(fs->fs_ipg * cg));
}
for (cg = 0; cg < prefcg; cg++)
if (fs->fs_cs(fs, cg).cs_ndir < maxndir &&
fs->fs_cs(fs, cg).cs_nifree >= minifree &&
fs->fs_cs(fs, cg).cs_nbfree >= minbfree) {
if (fs->fs_contigdirs[cg] < maxcontigdirs)
return ((ino_t)(fs->fs_ipg * cg));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
/*
* This is a backstop when we have deficit in space.
*/
for (cg = prefcg; cg < fs->fs_ncg; cg++)
if (fs->fs_cs(fs, cg).cs_nifree >= avgifree)
return ((ino_t)(fs->fs_ipg * cg));
for (cg = 0; cg < prefcg; cg++)
if (fs->fs_cs(fs, cg).cs_nifree >= avgifree)
break;
return ((ino_t)(fs->fs_ipg * cg));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Select the desired position for the next block in a file. The file is
* logically divided into sections. The first section is composed of the
* direct blocks. Each additional section contains fs_maxbpg blocks.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* If no blocks have been allocated in the first section, the policy is to
* request a block in the same cylinder group as the inode that describes
* the file. If no blocks have been allocated in any other section, the
* policy is to place the section in a cylinder group with a greater than
* average number of free blocks. An appropriate cylinder group is found
* by using a rotor that sweeps the cylinder groups. When a new group of
* blocks is needed, the sweep begins in the cylinder group following the
* cylinder group from which the previous allocation was made. The sweep
* continues until a cylinder group with greater than the average number
* of free blocks is found. If the allocation is for the first block in an
* indirect block, the information on the previous allocation is unavailable;
* here a best guess is made based upon the logical block number being
* allocated.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* If a section is already partially allocated, the policy is to
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* contiguously allocate fs_maxcontig blocks. The end of one of these
* contiguous blocks and the beginning of the next is laid out
* contiguously if possible.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t
ffs_blkpref_ufs1(ip, lbn, indx, bap)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t lbn;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int indx;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t *bap;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
int cg;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int avgbfree, startcg;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
mtx_assert(UFS_MTX(ip->i_ump), MA_OWNED);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
if (indx % fs->fs_maxbpg == 0 || bap[indx - 1] == 0) {
Preferentially allocate the first indirect block in the same cylinder group as the inode. This makes a 15% difference in read speed for files in the 96K to 500K size range.
1999-12-01 19:33:12 +00:00
if (lbn < NDADDR + NINDIR(fs)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cg = ino_to_cg(fs, ip->i_number);
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Find a cylinder with greater than average number of
* unused data blocks.
*/
if (indx == 0 || bap[indx - 1] == 0)
startcg =
ino_to_cg(fs, ip->i_number) + lbn / fs->fs_maxbpg;
else
startcg = dtog(fs, bap[indx - 1]) + 1;
startcg %= fs->fs_ncg;
avgbfree = fs->fs_cstotal.cs_nbfree / fs->fs_ncg;
for (cg = startcg; cg < fs->fs_ncg; cg++)
if (fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
fs->fs_cgrotor = cg;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
for (cg = 0; cg <= startcg; cg++)
if (fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
fs->fs_cgrotor = cg;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* We just always try to lay things out contiguously.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (bap[indx - 1] + fs->fs_frag);
}
/*
* Same as above, but for UFS2
*/
ufs2_daddr_t
ffs_blkpref_ufs2(ip, lbn, indx, bap)
struct inode *ip;
ufs_lbn_t lbn;
int indx;
ufs2_daddr_t *bap;
{
struct fs *fs;
int cg;
int avgbfree, startcg;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
mtx_assert(UFS_MTX(ip->i_ump), MA_OWNED);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fs = ip->i_fs;
if (indx % fs->fs_maxbpg == 0 || bap[indx - 1] == 0) {
if (lbn < NDADDR + NINDIR(fs)) {
cg = ino_to_cg(fs, ip->i_number);
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
/*
* Find a cylinder with greater than average number of
* unused data blocks.
*/
if (indx == 0 || bap[indx - 1] == 0)
startcg =
ino_to_cg(fs, ip->i_number) + lbn / fs->fs_maxbpg;
else
startcg = dtog(fs, bap[indx - 1]) + 1;
startcg %= fs->fs_ncg;
avgbfree = fs->fs_cstotal.cs_nbfree / fs->fs_ncg;
for (cg = startcg; cg < fs->fs_ncg; cg++)
if (fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
fs->fs_cgrotor = cg;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
for (cg = 0; cg <= startcg; cg++)
if (fs->fs_cs(fs, cg).cs_nbfree >= avgbfree) {
fs->fs_cgrotor = cg;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
return (cgbase(fs, cg) + fs->fs_frag);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
return (0);
}
Slight optimization for the standard case of rotdelay=0.
1995-09-08 17:16:32 +00:00
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* We just always try to lay things out contiguously.
Slight optimization for the standard case of rotdelay=0.
1995-09-08 17:16:32 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (bap[indx - 1] + fs->fs_frag);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Implement the cylinder overflow algorithm.
*
* The policy implemented by this algorithm is:
* 1) allocate the block in its requested cylinder group.
* 2) quadradically rehash on the cylinder group number.
* 3) brute force search for a free block.
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
*
* Must be called with the UFS lock held. Will release the lock on success
* and return with it held on failure.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
/*VARARGS5*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_hashalloc(ip, cg, pref, size, allocator)
struct inode *ip;
int cg;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t pref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int size; /* size for data blocks, mode for inodes */
Completed function declarations and/or added prototypes and/or #includes to get the prototypes.
1995-12-03 11:17:15 +00:00
allocfcn_t *allocator;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t result;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int i, icg = cg;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
mtx_assert(UFS_MTX(ip->i_ump), MA_OWNED);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#ifdef DIAGNOSTIC
if (ITOV(ip)->v_mount->mnt_kern_flag & MNTK_SUSPENDED)
panic("ffs_hashalloc: allocation on suspended filesystem");
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
/*
* 1: preferred cylinder group
*/
result = (*allocator)(ip, cg, pref, size);
if (result)
return (result);
/*
* 2: quadratic rehash
*/
for (i = 1; i < fs->fs_ncg; i *= 2) {
cg += i;
if (cg >= fs->fs_ncg)
cg -= fs->fs_ncg;
result = (*allocator)(ip, cg, 0, size);
if (result)
return (result);
}
/*
* 3: brute force search
* Note that we start at i == 2, since 0 was checked initially,
* and 1 is always checked in the quadratic rehash.
*/
cg = (icg + 2) % fs->fs_ncg;
for (i = 2; i < fs->fs_ncg; i++) {
result = (*allocator)(ip, cg, 0, size);
if (result)
return (result);
cg++;
if (cg == fs->fs_ncg)
cg = 0;
}
Completed function declarations and/or added prototypes and/or #includes to get the prototypes.
1995-12-03 11:17:15 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Determine whether a fragment can be extended.
*
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* Check to see if the necessary fragments are available, and
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* if they are, allocate them.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_fragextend(ip, cg, bprev, osize, nsize)
struct inode *ip;
int cg;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bprev;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int osize, nsize;
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
struct cg *cgp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
int nffree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
long bno;
int frags, bbase;
int i, error;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
if (fs->fs_cs(fs, cg).cs_nffree < numfrags(fs, nsize - osize))
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
frags = numfrags(fs, nsize);
bbase = fragnum(fs, bprev);
if (bbase > fragnum(fs, (bprev + frags - 1))) {
/* cannot extend across a block boundary */
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, cg)),
(int)fs->fs_cgsize, NOCRED, &bp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (error)
goto fail;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp = (struct cg *)bp->b_data;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (!cg_chkmagic(cgp))
goto fail;
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgp->cg_old_time = cgp->cg_time = time_second;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bno = dtogd(fs, bprev);
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = numfrags(fs, osize); i < frags; i++)
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (isclr(blksfree, bno + i))
goto fail;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* the current fragment can be extended
* deduct the count on fragment being extended into
* increase the count on the remaining fragment (if any)
* allocate the extended piece
*/
for (i = frags; i < fs->fs_frag - bbase; i++)
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
if (isclr(blksfree, bno + i))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
cgp->cg_frsum[i - numfrags(fs, osize)]--;
if (i != frags)
cgp->cg_frsum[i - frags]++;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
for (i = numfrags(fs, osize), nffree = 0; i < frags; i++) {
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
clrbit(blksfree, bno + i);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nffree--;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
nffree++;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
fs->fs_cstotal.cs_nffree -= nffree;
fs->fs_cs(fs, cg).cs_nffree -= nffree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs->fs_fmod = 1;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (DOINGSOFTDEP(ITOV(ip)))
softdep_setup_blkmapdep(bp, fs, bprev);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
return (bprev);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
fail:
brelse(bp);
UFS_LOCK(ump);
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Determine whether a block can be allocated.
*
* Check to see if a block of the appropriate size is available,
* and if it is, allocate it.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_alloccg(ip, cg, bpref, size)
struct inode *ip;
int cg;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int size;
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
struct cg *cgp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t bno;
ufs2_daddr_t blkno;
int i, allocsiz, error, frags;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
if (fs->fs_cs(fs, cg).cs_nbfree == 0 && size == fs->fs_bsize)
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, cg)),
(int)fs->fs_cgsize, NOCRED, &bp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (error)
goto fail;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp) ||
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
(cgp->cg_cs.cs_nbfree == 0 && size == fs->fs_bsize))
goto fail;
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgp->cg_old_time = cgp->cg_time = time_second;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (size == fs->fs_bsize) {
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = ffs_alloccgblk(ip, bp, bpref);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (blkno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* check to see if any fragments are already available
* allocsiz is the size which will be allocated, hacking
* it down to a smaller size if necessary
*/
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
frags = numfrags(fs, size);
for (allocsiz = frags; allocsiz < fs->fs_frag; allocsiz++)
if (cgp->cg_frsum[allocsiz] != 0)
break;
if (allocsiz == fs->fs_frag) {
/*
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* no fragments were available, so a block will be
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* allocated, and hacked up
*/
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (cgp->cg_cs.cs_nbfree == 0)
goto fail;
UFS_LOCK(ump);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = ffs_alloccgblk(ip, bp, bpref);
bno = dtogd(fs, blkno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = frags; i < fs->fs_frag; i++)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
setbit(blksfree, bno + i);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
i = fs->fs_frag - frags;
cgp->cg_cs.cs_nffree += i;
fs->fs_cstotal.cs_nffree += i;
fs->fs_cs(fs, cg).cs_nffree += i;
fs->fs_fmod = 1;
cgp->cg_frsum[i]++;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (blkno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
bno = ffs_mapsearch(fs, cgp, bpref, allocsiz);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if (bno < 0)
goto fail;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 0; i < frags; i++)
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
clrbit(blksfree, bno + i);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nffree -= frags;
cgp->cg_frsum[allocsiz]--;
if (frags != allocsiz)
cgp->cg_frsum[allocsiz - frags]++;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
fs->fs_cstotal.cs_nffree -= frags;
fs->fs_cs(fs, cg).cs_nffree -= frags;
fs->fs_fmod = 1;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
blkno = cgbase(fs, cg) + bno;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (DOINGSOFTDEP(ITOV(ip)))
softdep_setup_blkmapdep(bp, fs, blkno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (blkno);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
fail:
brelse(bp);
UFS_LOCK(ump);
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Allocate a block in a cylinder group.
*
* This algorithm implements the following policy:
* 1) allocate the requested block.
* 2) allocate a rotationally optimal block in the same cylinder.
* 3) allocate the next available block on the block rotor for the
* specified cylinder group.
* Note that this routine only allocates fs_bsize blocks; these
* blocks may be fragmented by the routine that allocates them.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
ffs_alloccgblk(ip, bp, bpref)
struct inode *ip;
struct buf *bp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
struct fs *fs;
struct cg *cgp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t bno;
ufs2_daddr_t blkno;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
mtx_assert(UFS_MTX(ump), MA_OWNED);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
cgp = (struct cg *)bp->b_data;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bpref == 0 || dtog(fs, bpref) != cgp->cg_cgx) {
bpref = cgp->cg_rotor;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
} else {
bpref = blknum(fs, bpref);
bno = dtogd(fs, bpref);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* if the requested block is available, use it
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ffs_isblock(fs, blksfree, fragstoblks(fs, bno)))
goto gotit;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* Take the next available block in this cylinder group.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
bno = ffs_mapsearch(fs, cgp, bpref, (int)fs->fs_frag);
if (bno < 0)
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_rotor = bno;
gotit:
blkno = fragstoblks(fs, bno);
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
ffs_clrblock(fs, blksfree, (long)blkno);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_clusteracct(ump, fs, cgp, blkno, -1);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nbfree--;
fs->fs_cstotal.cs_nbfree--;
fs->fs_cs(fs, cgp->cg_cgx).cs_nbfree--;
fs->fs_fmod = 1;
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
blkno = cgbase(fs, cgp->cg_cgx) + bno;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
/* XXX Fixme. */
UFS_UNLOCK(ump);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (DOINGSOFTDEP(ITOV(ip)))
softdep_setup_blkmapdep(bp, fs, blkno);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (blkno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Determine whether a cluster can be allocated.
*
* We do not currently check for optimal rotational layout if there
* are multiple choices in the same cylinder group. Instead we just
* take the first one that we find following bpref.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_clusteralloc(ip, cg, bpref, len)
struct inode *ip;
int cg;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int len;
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
struct cg *cgp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, run, bit, map, got;
ufs2_daddr_t bno;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char *mapp;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int32_t *lp;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (fs->fs_maxcluster[cg] < len)
Change incorrect NULLs to 0s
1999-12-21 11:14:12 +00:00
return (0);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, cg)), (int)fs->fs_cgsize,
NOCRED, &bp))
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
goto fail_lock;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp))
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
goto fail_lock;
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Check to see if a cluster of the needed size (or bigger) is
* available in this cylinder group.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
lp = &cg_clustersum(cgp)[len];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = len; i <= fs->fs_contigsumsize; i++)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (*lp++ > 0)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (i > fs->fs_contigsumsize) {
/*
* This is the first time looking for a cluster in this
* cylinder group. Update the cluster summary information
* to reflect the true maximum sized cluster so that
* future cluster allocation requests can avoid reading
* the cylinder group map only to find no clusters.
*/
lp = &cg_clustersum(cgp)[len - 1];
for (i = len - 1; i > 0; i--)
if (*lp-- > 0)
break;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
fs->fs_maxcluster[cg] = i;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto fail;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Search the cluster map to find a big enough cluster.
* We take the first one that we find, even if it is larger
* than we need as we prefer to get one close to the previous
* block allocation. We do not search before the current
* preference point as we do not want to allocate a block
* that is allocated before the previous one (as we will
* then have to wait for another pass of the elevator
* algorithm before it will be read). We prefer to fail and
* be recalled to try an allocation in the next cylinder group.
*/
if (dtog(fs, bpref) != cg)
bpref = 0;
else
bpref = fragstoblks(fs, dtogd(fs, blknum(fs, bpref)));
mapp = &cg_clustersfree(cgp)[bpref / NBBY];
map = *mapp++;
bit = 1 << (bpref % NBBY);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
for (run = 0, got = bpref; got < cgp->cg_nclusterblks; got++) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((map & bit) == 0) {
run = 0;
} else {
run++;
if (run == len)
break;
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if ((got & (NBBY - 1)) != (NBBY - 1)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bit <<= 1;
} else {
map = *mapp++;
bit = 1;
}
}
We got a couple of "map mismatch" panics from the following code. According to the crash dump, bpref is set to 445 and cgp->cg_nclusterblks is 444. Hence in the for loop, the test fails immediately but the following failure check (got == cgp->cg_nclusterblks) doesn't trigger because got > cgp->cg_nclusterblks. This wreaks havoc in the code after that. Fix: Move one source bit to the left :-) Noticed by: Mike Hibler <mike@fast.cs.utah.edu> Submitted by: Kirk McKusick <mckusick@McKusick.COM>
1997-08-04 07:30:43 +00:00
if (got >= cgp->cg_nclusterblks)
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
goto fail_lock;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Allocate the cluster that we have found.
*/
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
for (i = 1; i <= len; i++)
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
if (!ffs_isblock(fs, blksfree, got - run + i))
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
panic("ffs_clusteralloc: map mismatch");
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
bno = cgbase(fs, cg) + blkstofrags(fs, got - run + 1);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (dtog(fs, bno) != cg)
panic("ffs_clusteralloc: allocated out of group");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
len = blkstofrags(fs, len);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 0; i < len; i += fs->fs_frag)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ffs_alloccgblk(ip, bp, bno + i) != bno + i)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_clusteralloc: lost block");
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
Use bdwrite() rather than brelse(). The cylinder group bitmap modification is not preserved otherwise. Note that this is a no-op in FreeBSD, however, as we have doreallocblks disabled. Submitted by: Kirk McKusick
1995-08-07 08:16:32 +00:00
bdwrite(bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (bno);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
fail_lock:
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fail:
brelse(bp);
return (0);
}
/*
* Determine whether an inode can be allocated.
*
* Check to see if an inode is available, and if it is,
* allocate it using the following policy:
* 1) allocate the requested inode.
* 2) allocate the next available inode after the requested
* inode in the specified cylinder group.
*/
This patch fixes a problem whereby filesystems that ran out of inodes in a cylinder group would fail to check for free inodes in other cylinder groups. This bug was introduced in the UFS2 code merge two days ago. An inode is allocated by calling ffs_valloc which calls ffs_hashalloc to do the filesystem scan. Ffs_hashalloc walks around the cylinder groups calling its passed allocator (ffs_nodealloccg in this case) until the allocator returns a non-zero result. The bug is that ffs_hashalloc expects the passed allocator function to return a 64-bit ufs2_daddr_t. When allocating inodes, it calls ffs_nodealloccg which was returning a 32-bit ino_t. The ffs_hashalloc code checked a 64-bit return value and usually found random non-zero bits in the high 32-bits so decided that the allocation had succeeded (in this case in the only cylinder group that it checked). When the result was passed back to ffs_valloc it looked at only the bottom 32-bits, saw zero and declared the system out of inodes. But ffs_hashalloc had really only checked one cylinder group. The fix is to change ffs_nodealloccg to return 64-bit results. Sponsored by: DARPA & NAI Labs. Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk> Reviewed by: Maxime Henrion <mux@freebsd.org>
2002-06-22 21:24:58 +00:00
static ufs2_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_nodealloccg(ip, cg, ipref, mode)
struct inode *ip;
int cg;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t ipref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int mode;
{
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
struct cg *cgp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct buf *bp, *ibp;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct ufsmount *ump;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *inosused;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct ufs2_dinode *dp2;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int error, start, len, loc, map, i;
fs = ip->i_fs;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ump = ip->i_ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (fs->fs_cs(fs, cg).cs_nifree == 0)
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, cg)),
(int)fs->fs_cgsize, NOCRED, &bp);
if (error) {
brelse(bp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp) || cgp->cg_cs.cs_nifree == 0) {
brelse(bp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
Don't use NULL in non-pointer contexts.
1996-07-12 04:12:25 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgp->cg_old_time = cgp->cg_time = time_second;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
inosused = cg_inosused(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ipref) {
ipref %= fs->fs_ipg;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
if (isclr(inosused, ipref))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto gotit;
}
start = cgp->cg_irotor / NBBY;
len = howmany(fs->fs_ipg - cgp->cg_irotor, NBBY);
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
loc = skpc(0xff, len, &inosused[start]);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (loc == 0) {
len = start + 1;
start = 0;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
loc = skpc(0xff, len, &inosused[0]);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (loc == 0) {
YF fix.
1995-02-14 06:14:28 +00:00
printf("cg = %d, irotor = %ld, fs = %s\n",
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
cg, (long)cgp->cg_irotor, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_nodealloccg: map corrupted");
/* NOTREACHED */
}
}
i = start + len - loc;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
map = inosused[i];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipref = i * NBBY;
for (i = 1; i < (1 << NBBY); i <<= 1, ipref++) {
if ((map & i) == 0) {
cgp->cg_irotor = ipref;
goto gotit;
}
}
printf("fs = %s\n", fs->fs_fsmnt);
panic("ffs_nodealloccg: block not in map");
/* NOTREACHED */
gotit:
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* Check to see if we need to initialize more inodes.
*/
Avoid doing bawrite to initialize inode block while holding cylinder group block locked. If filesystem has any active snapshots, bawrite can come back trying to allocate new snapshot data block from the same cylinder group and cause panic due to recursive lock attempt. PR: 64206 Reviewed by: mckusick Tested by: pjd
2004-03-16 22:06:32 +00:00
ibp = NULL;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS2_MAGIC &&
ipref + INOPB(fs) > cgp->cg_initediblk &&
cgp->cg_initediblk < cgp->cg_niblk) {
ibp = getblk(ip->i_devvp, fsbtodb(fs,
ino_to_fsba(fs, cg * fs->fs_ipg + cgp->cg_initediblk)),
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
(int)fs->fs_bsize, 0, 0, 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bzero(ibp->b_data, (int)fs->fs_bsize);
dp2 = (struct ufs2_dinode *)(ibp->b_data);
for (i = 0; i < INOPB(fs); i++) {
Replace use of random() with arc4random() to provide less guessable values for the initial inode generation numbers in newfs and for newly allocated inode generation numbers in the kernel. Submitted by: Theo de Raadt <deraadt@cvs.openbsd.org> Sponsored by: DARPA & NAI Labs.
2003-02-14 21:31:58 +00:00
dp2->di_gen = arc4random() / 2 + 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dp2++;
}
cgp->cg_initediblk += INOPB(fs);
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
ACTIVECLEAR(fs, cg);
setbit(inosused, ipref);
cgp->cg_cs.cs_nifree--;
fs->fs_cstotal.cs_nifree--;
fs->fs_cs(fs, cg).cs_nifree--;
fs->fs_fmod = 1;
if ((mode & IFMT) == IFDIR) {
cgp->cg_cs.cs_ndir++;
fs->fs_cstotal.cs_ndir++;
fs->fs_cs(fs, cg).cs_ndir++;
}
UFS_UNLOCK(ump);
if (DOINGSOFTDEP(ITOV(ip)))
softdep_setup_inomapdep(bp, ip, cg * fs->fs_ipg + ipref);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
Avoid doing bawrite to initialize inode block while holding cylinder group block locked. If filesystem has any active snapshots, bawrite can come back trying to allocate new snapshot data block from the same cylinder group and cause panic due to recursive lock attempt. PR: 64206 Reviewed by: mckusick Tested by: pjd
2004-03-16 22:06:32 +00:00
if (ibp != NULL)
bawrite(ibp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (cg * fs->fs_ipg + ipref);
}
Move ffs_isfreeblock() to ffs_alloc.c and make it static. Sponsored by: DARPA & NAI Labs.
2002-07-30 11:54:48 +00:00
/*
* check if a block is free
*/
static int
Cosmetic cleanup of unsigned buglets. Submitted by: Bruce Evans <bde@zeta.org.au> Sponsored by: DARPA & NAI Labs.
2002-12-18 00:53:45 +00:00
ffs_isfreeblock(struct fs *fs, u_char *cp, ufs1_daddr_t h)
Move ffs_isfreeblock() to ffs_alloc.c and make it static. Sponsored by: DARPA & NAI Labs.
2002-07-30 11:54:48 +00:00
{
switch ((int)fs->fs_frag) {
case 8:
return (cp[h] == 0);
case 4:
return ((cp[h >> 1] & (0x0f << ((h & 0x1) << 2))) == 0);
case 2:
return ((cp[h >> 2] & (0x03 << ((h & 0x3) << 1))) == 0);
case 1:
return ((cp[h >> 3] & (0x01 << (h & 0x7))) == 0);
default:
panic("ffs_isfreeblock");
}
return (0);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Free a block or fragment.
*
* The specified block or fragment is placed back in the
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
* free map. If a fragment is deallocated, a possible
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* block reassembly is checked.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, devvp, bno, size, inum)
struct ufsmount *ump;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct fs *fs;
struct vnode *devvp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bno;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
long size;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ino_t inum;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct cg *cgp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t fragno, cgbno;
ufs2_daddr_t cgblkno;
Remove unused local variables. Found by: FlexeLint
2003-05-31 18:17:32 +00:00
int i, cg, blk, frags, bbase;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
struct cdev *dev;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
cg = dtog(fs, bno);
if (devvp->v_type != VCHR) {
/* devvp is a snapshot */
dev = VTOI(devvp)->i_devvp->v_rdev;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgblkno = fragstoblks(fs, cgtod(fs, cg));
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
} else {
/* devvp is a normal disk device */
dev = devvp->v_rdev;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgblkno = fsbtodb(fs, cgtod(fs, cg));
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
ASSERT_VOP_LOCKED(devvp, "ffs_blkfree");
if ((devvp->v_vflag & VV_COPYONWRITE) &&
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_snapblkfree(fs, devvp, bno, size, inum))
return;
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#ifdef DIAGNOSTIC
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if ((u_int)size > fs->fs_bsize || fragoff(fs, size) != 0 ||
fragnum(fs, bno) + numfrags(fs, size) > fs->fs_frag) {
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf("dev=%s, bno = %jd, bsize = %ld, size = %ld, fs = %s\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
devtoname(dev), (intmax_t)bno, (long)fs->fs_bsize,
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
size, fs->fs_fsmnt);
Update a number of panic messages to reflect the actual name of the routine that caused the panic.
1997-03-09 06:00:44 +00:00
panic("ffs_blkfree: bad size");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((u_int)bno >= fs->fs_size) {
Warning fixes for 64 bits platforms. This eliminates all the warnings I have had in the FFS code on sparc64. Reviewed by: mckusick
2002-06-23 18:17:27 +00:00
printf("bad block %jd, ino %lu\n", (intmax_t)bno,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(u_long)inum);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_fserr(fs, inum, "bad block");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return;
}
Remove unused local variables. Found by: FlexeLint
2003-05-31 18:17:32 +00:00
if (bread(devvp, cgblkno, (int)fs->fs_cgsize, NOCRED, &bp)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(bp);
return;
}
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp)) {
brelse(bp);
return;
}
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgp->cg_old_time = cgp->cg_time = time_second;
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
cgbno = dtogd(fs, bno);
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (size == fs->fs_bsize) {
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
fragno = fragstoblks(fs, cgbno);
if (!ffs_isfreeblock(fs, blksfree, fragno)) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (devvp->v_type != VCHR) {
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_UNLOCK(ump);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/* devvp is a snapshot */
brelse(bp);
return;
}
Warning fixes for 64 bits platforms. This eliminates all the warnings I have had in the FFS code on sparc64. Reviewed by: mckusick
2002-06-23 18:17:27 +00:00
printf("dev = %s, block = %jd, fs = %s\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
devtoname(dev), (intmax_t)bno, fs->fs_fsmnt);
Update a number of panic messages to reflect the actual name of the routine that caused the panic.
1997-03-09 06:00:44 +00:00
panic("ffs_blkfree: freeing free block");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
ffs_setblock(fs, blksfree, fragno);
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_clusteracct(ump, fs, cgp, fragno, 1);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nbfree++;
fs->fs_cstotal.cs_nbfree++;
fs->fs_cs(fs, cg).cs_nbfree++;
} else {
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
bbase = cgbno - fragnum(fs, cgbno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* decrement the counts associated with the old frags
*/
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blk = blkmap(fs, blksfree, bbase);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_fragacct(fs, blk, cgp->cg_frsum, -1);
/*
* deallocate the fragment
*/
frags = numfrags(fs, size);
for (i = 0; i < frags; i++) {
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
if (isset(blksfree, cgbno + i)) {
Warning fixes for 64 bits platforms. This eliminates all the warnings I have had in the FFS code on sparc64. Reviewed by: mckusick
2002-06-23 18:17:27 +00:00
printf("dev = %s, block = %jd, fs = %s\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
devtoname(dev), (intmax_t)(bno + i),
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
fs->fs_fsmnt);
Update a number of panic messages to reflect the actual name of the routine that caused the panic.
1997-03-09 06:00:44 +00:00
panic("ffs_blkfree: freeing free frag");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
setbit(blksfree, cgbno + i);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
cgp->cg_cs.cs_nffree += i;
fs->fs_cstotal.cs_nffree += i;
fs->fs_cs(fs, cg).cs_nffree += i;
/*
* add back in counts associated with the new frags
*/
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blk = blkmap(fs, blksfree, bbase);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_fragacct(fs, blk, cgp->cg_frsum, 1);
/*
* if a complete block has been reassembled, account for it
*/
Report the correct inode number when panicing with freeing free inode. Report the correct block number when panicing with freeing free block.
2001-03-21 04:01:02 +00:00
fragno = fragstoblks(fs, bbase);
if (ffs_isblock(fs, blksfree, fragno)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nffree -= fs->fs_frag;
fs->fs_cstotal.cs_nffree -= fs->fs_frag;
fs->fs_cs(fs, cg).cs_nffree -= fs->fs_frag;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_clusteracct(ump, fs, cgp, fragno, 1);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_nbfree++;
fs->fs_cstotal.cs_nbfree++;
fs->fs_cs(fs, cg).cs_nbfree++;
}
}
fs->fs_fmod = 1;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#ifdef DIAGNOSTIC
/*
* Verify allocation of a block or fragment. Returns true if block or
* fragment is allocated, false if it is free.
*/
Staticized.
1997-11-22 08:35:46 +00:00
static int
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
ffs_checkblk(ip, bno, size)
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bno;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
long size;
{
struct fs *fs;
struct cg *cgp;
struct buf *bp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t cgbno;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int i, error, frags, free;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
fs = ip->i_fs;
if ((u_int)size > fs->fs_bsize || fragoff(fs, size) != 0) {
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
printf("bsize = %ld, size = %ld, fs = %s\n",
(long)fs->fs_bsize, size, fs->fs_fsmnt);
Correct the new Lite2 #ifdef DIAGNOSTIC ffs_checkblk routine to not return without setting a return value when it can't read a block error or detects a bad cylinder group, since the caller is expecting a return value. It will now panic at this point, since the thing to do in this case would be to return a "bad block" status to the caller, and the caller will panic anyways when that happens. Also updated to panic strings in this routine to read "ffs_checkblk: ..." instead of "checkblk: ...".
1997-02-10 17:05:30 +00:00
panic("ffs_checkblk: bad size");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
if ((u_int)bno >= fs->fs_size)
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
panic("ffs_checkblk: bad block %jd", (intmax_t)bno);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
error = bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, dtog(fs, bno))),
(int)fs->fs_cgsize, NOCRED, &bp);
Correct the new Lite2 #ifdef DIAGNOSTIC ffs_checkblk routine to not return without setting a return value when it can't read a block error or detects a bad cylinder group, since the caller is expecting a return value. It will now panic at this point, since the thing to do in this case would be to return a "bad block" status to the caller, and the caller will panic anyways when that happens. Also updated to panic strings in this routine to read "ffs_checkblk: ..." instead of "checkblk: ...".
1997-02-10 17:05:30 +00:00
if (error)
panic("ffs_checkblk: cg bread failed");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
cgp = (struct cg *)bp->b_data;
Correct the new Lite2 #ifdef DIAGNOSTIC ffs_checkblk routine to not return without setting a return value when it can't read a block error or detects a bad cylinder group, since the caller is expecting a return value. It will now panic at this point, since the thing to do in this case would be to return a "bad block" status to the caller, and the caller will panic anyways when that happens. Also updated to panic strings in this routine to read "ffs_checkblk: ..." instead of "checkblk: ...".
1997-02-10 17:05:30 +00:00
if (!cg_chkmagic(cgp))
panic("ffs_checkblk: cg magic mismatch");
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgbno = dtogd(fs, bno);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (size == fs->fs_bsize) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
free = ffs_isblock(fs, blksfree, fragstoblks(fs, cgbno));
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
} else {
frags = numfrags(fs, size);
for (free = 0, i = 0; i < frags; i++)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (isset(blksfree, cgbno + i))
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
free++;
if (free != 0 && free != frags)
Correct the new Lite2 #ifdef DIAGNOSTIC ffs_checkblk routine to not return without setting a return value when it can't read a block error or detects a bad cylinder group, since the caller is expecting a return value. It will now panic at this point, since the thing to do in this case would be to return a "bad block" status to the caller, and the caller will panic anyways when that happens. Also updated to panic strings in this routine to read "ffs_checkblk: ..." instead of "checkblk: ...".
1997-02-10 17:05:30 +00:00
panic("ffs_checkblk: partially free fragment");
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
brelse(bp);
return (!free);
}
#endif /* DIAGNOSTIC */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Free an inode.
*/
int
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ffs_vfree(pvp, ino, mode)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
struct vnode *pvp;
ino_t ino;
int mode;
{
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
struct inode *ip;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (DOINGSOFTDEP(pvp)) {
softdep_freefile(pvp, ino, mode);
return (0);
}
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ip = VTOI(pvp);
return (ffs_freefile(ip->i_ump, ip->i_fs, ip->i_devvp, ino, mode));
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
/*
* Do the actual free operation.
* The specified inode is placed back in the free map.
*/
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
int
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_freefile(ump, fs, devvp, ino, mode)
struct ufsmount *ump;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct fs *fs;
struct vnode *devvp;
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
ino_t ino;
int mode;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct cg *cgp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct buf *bp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t cgbno;
int error, cg;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *inosused;
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
struct cdev *dev;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cg = ino_to_cg(fs, ino);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (devvp->v_type != VCHR) {
/* devvp is a snapshot */
dev = VTOI(devvp)->i_devvp->v_rdev;
cgbno = fragstoblks(fs, cgtod(fs, cg));
} else {
/* devvp is a normal disk device */
dev = devvp->v_rdev;
cgbno = fsbtodb(fs, cgtod(fs, cg));
}
if ((u_int)ino >= fs->fs_ipg * fs->fs_ncg)
Cosmetic cleanup of unsigned buglets. Submitted by: Bruce Evans <bde@zeta.org.au> Sponsored by: DARPA & NAI Labs.
2002-12-18 00:53:45 +00:00
panic("ffs_freefile: range: dev = %s, ino = %lu, fs = %s",
devtoname(dev), (u_long)ino, fs->fs_fsmnt);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if ((error = bread(devvp, cgbno, (int)fs->fs_cgsize, NOCRED, &bp))) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(bp);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp)) {
brelse(bp);
return (0);
}
Several performance improvements for soft updates have been added: 1) Fastpath deletions. When a file is being deleted, check to see if it was so recently created that its inode has not yet been written to disk. If so, the delete can proceed to immediately free the inode. 2) Background writes: No file or block allocations can be done while the bitmap is being written to disk. To avoid these stalls, the bitmap is copied to another buffer which is written thus leaving the original available for futher allocations. 3) Link count tracking. Constantly track the difference in i_effnlink and i_nlink so that inodes that have had no change other than i_effnlink need not be written. 4) Identify buffers with rollback dependencies so that the buffer flushing daemon can choose to skip over them.
2000-01-10 00:24:24 +00:00
bp->b_xflags |= BX_BKGRDWRITE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cgp->cg_old_time = cgp->cg_time = time_second;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
inosused = cg_inosused(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ino %= fs->fs_ipg;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
if (isclr(inosused, ino)) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
printf("dev = %s, ino = %lu, fs = %s\n", devtoname(dev),
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
(u_long)ino + cg * fs->fs_ipg, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (fs->fs_ronly == 0)
Cosmetic cleanup of unsigned buglets. Submitted by: Bruce Evans <bde@zeta.org.au> Sponsored by: DARPA & NAI Labs.
2002-12-18 00:53:45 +00:00
panic("ffs_freefile: freeing free inode");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
clrbit(inosused, ino);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ino < cgp->cg_irotor)
cgp->cg_irotor = ino;
cgp->cg_cs.cs_nifree++;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
UFS_LOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fs->fs_cstotal.cs_nifree++;
fs->fs_cs(fs, cg).cs_nifree++;
VFS mega cleanup commit (x/N) 1. Add new file "sys/kern/vfs_default.c" where default actions for VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE, POLL, REVOKE and STRATEGY. Various stuff spread over the entire tree belongs here. 2. Change VOP_BLKATOFF to a normal function in cd9660. 3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These are private interface functions between UFS and the underlying storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now live in struct ufsmount instead. 4. Remove a kludge of VOP_ functions in all filesystems, that did nothing but obscure the simplicity and break the expandability. If a filesystem doesn't implement VOP_FOO, it shouldn't have an entry for it in its vnops table. The system will try to DTRT if it is not implemented. There are still some cruft left, but the bulk of it is done. 5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
1997-10-16 10:50:27 +00:00
if ((mode & IFMT) == IFDIR) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
cgp->cg_cs.cs_ndir--;
fs->fs_cstotal.cs_ndir--;
fs->fs_cs(fs, cg).cs_ndir--;
}
fs->fs_fmod = 1;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ACTIVECLEAR(fs, cg);
UFS_UNLOCK(ump);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdwrite(bp);
return (0);
}
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
/*
* Check to see if a file is free.
*/
int
ffs_checkfreefile(fs, devvp, ino)
struct fs *fs;
struct vnode *devvp;
ino_t ino;
{
struct cg *cgp;
struct buf *bp;
ufs2_daddr_t cgbno;
Remove unused local variables. Found by: FlexeLint
2003-05-31 18:17:32 +00:00
int ret, cg;
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
u_int8_t *inosused;
cg = ino_to_cg(fs, ino);
if (devvp->v_type != VCHR) {
/* devvp is a snapshot */
cgbno = fragstoblks(fs, cgtod(fs, cg));
} else {
/* devvp is a normal disk device */
cgbno = fsbtodb(fs, cgtod(fs, cg));
}
if ((u_int)ino >= fs->fs_ipg * fs->fs_ncg)
return (1);
Remove unused local variables. Found by: FlexeLint
2003-05-31 18:17:32 +00:00
if (bread(devvp, cgbno, (int)fs->fs_cgsize, NOCRED, &bp)) {
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
brelse(bp);
return (1);
}
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp)) {
brelse(bp);
return (1);
}
inosused = cg_inosused(cgp);
ino %= fs->fs_ipg;
ret = isclr(inosused, ino);
brelse(bp);
return (ret);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Find a block of the specified size in the specified cylinder group.
*
* It is a panic if a request is made to find a block if none are
* available.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs1_daddr_t
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ffs_mapsearch(fs, cgp, bpref, allocsiz)
Remove register keyword. Sponsored by: DARPA & NAI Labs. Submitted by: mckusick
2002-05-13 09:22:31 +00:00
struct fs *fs;
struct cg *cgp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bpref;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int allocsiz;
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t bno;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int start, len, loc, i;
int blk, field, subfield, pos;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
u_int8_t *blksfree;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* find the fragment by searching through the free block
* map for an appropriate bit pattern
*/
if (bpref)
start = dtogd(fs, bpref) / NBBY;
else
start = cgp->cg_frotor / NBBY;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blksfree = cg_blksfree(cgp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
len = howmany(fs->fs_fpg, NBBY) - start;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
loc = scanc((u_int)len, (u_char *)&blksfree[start],
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
(u_char *)fragtbl[fs->fs_frag],
(u_char)(1 << (allocsiz - 1 + (fs->fs_frag % NBBY))));
if (loc == 0) {
len = start + 1;
start = 0;
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
loc = scanc((u_int)len, (u_char *)&blksfree[0],
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
(u_char *)fragtbl[fs->fs_frag],
(u_char)(1 << (allocsiz - 1 + (fs->fs_frag % NBBY))));
if (loc == 0) {
printf("start = %d, len = %d, fs = %s\n",
start, len, fs->fs_fsmnt);
panic("ffs_alloccg: map corrupted");
/* NOTREACHED */
}
}
bno = (start + len - loc) * NBBY;
cgp->cg_frotor = bno;
/*
* found the byte in the map
* sift through the bits to find the selected frag
*/
for (i = bno + NBBY; bno < i; bno += fs->fs_frag) {
Use 64-bit math to decide if optimization needs to be changed. Necessary for coherent results on filesystems bigger than 0.5Tb. Submitted by: Paul Saab <ps@yahoo-inc.com>
2000-03-15 07:08:36 +00:00
blk = blkmap(fs, blksfree, bno);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
blk <<= 1;
field = around[allocsiz];
subfield = inside[allocsiz];
for (pos = 0; pos <= fs->fs_frag - allocsiz; pos++) {
if ((blk & field) == subfield)
return (bno + pos);
field <<= 1;
subfield <<= 1;
}
}
Cosmetics. make gcc less noisy. Still some way to go here.
1994-10-10 01:04:55 +00:00
printf("bno = %lu, fs = %s\n", (u_long)bno, fs->fs_fsmnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("ffs_alloccg: block not in map");
return (-1);
}
/*
* Update the cluster map because of an allocation or free.
*
* Cnt == 1 means free; cnt == -1 means allocating.
*/
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
void
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_clusteracct(ump, fs, cgp, blkno, cnt)
struct ufsmount *ump;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct fs *fs;
struct cg *cgp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t blkno;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int cnt;
{
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int32_t *sump;
int32_t *lp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char *freemapp, *mapp;
int i, start, end, forw, back, map, bit;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
mtx_assert(UFS_MTX(ump), MA_OWNED);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (fs->fs_contigsumsize <= 0)
return;
freemapp = cg_clustersfree(cgp);
sump = cg_clustersum(cgp);
/*
* Allocate or clear the actual block.
*/
if (cnt > 0)
setbit(freemapp, blkno);
else
clrbit(freemapp, blkno);
/*
* Find the size of the cluster going forward.
*/
start = blkno + 1;
end = start + fs->fs_contigsumsize;
if (end >= cgp->cg_nclusterblks)
end = cgp->cg_nclusterblks;
mapp = &freemapp[start / NBBY];
map = *mapp++;
bit = 1 << (start % NBBY);
for (i = start; i < end; i++) {
if ((map & bit) == 0)
break;
if ((i & (NBBY - 1)) != (NBBY - 1)) {
bit <<= 1;
} else {
map = *mapp++;
bit = 1;
}
}
forw = i - start;
/*
* Find the size of the cluster going backward.
*/
start = blkno - 1;
end = start - fs->fs_contigsumsize;
if (end < 0)
end = -1;
mapp = &freemapp[start / NBBY];
map = *mapp--;
bit = 1 << (start % NBBY);
for (i = start; i > end; i--) {
if ((map & bit) == 0)
break;
if ((i & (NBBY - 1)) != 0) {
bit >>= 1;
} else {
map = *mapp--;
bit = 1 << (NBBY - 1);
}
}
back = start - i;
/*
* Account for old cluster and the possibly new forward and
* back clusters.
*/
i = back + forw + 1;
if (i > fs->fs_contigsumsize)
i = fs->fs_contigsumsize;
sump[i] += cnt;
if (back > 0)
sump[back] -= cnt;
if (forw > 0)
sump[forw] -= cnt;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
/*
* Update cluster summary information.
*/
lp = &sump[fs->fs_contigsumsize];
for (i = fs->fs_contigsumsize; i > 0; i--)
if (*lp-- > 0)
break;
fs->fs_maxcluster[cgp->cg_cgx] = i;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
* Fserr prints the name of a filesystem with an error diagnostic.
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* The form of the error message is:
* fs: error message
*/
static void
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_fserr(fs, inum, cp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct fs *fs;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ino_t inum;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
char *cp;
{
Minor fixes to ffs_fserr(): - Assume that curthread is not NULL. It never is in -current. - Use td_ucred instead of p_ucred.
2003-03-20 21:15:54 +00:00
struct thread *td = curthread; /* XXX */
struct proc *p = td->td_proc;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
log(LOG_ERR, "pid %d (%s), uid %d inumber %d on %s: %s\n",
Minor fixes to ffs_fserr(): - Assume that curthread is not NULL. It never is in -current. - Use td_ucred instead of p_ucred.
2003-03-20 21:15:54 +00:00
p->p_pid, p->p_comm, td->td_ucred->cr_uid, inum, fs->fs_fsmnt, cp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
/*
* This function provides the capability for the fsck program to
The recomputation of file system summary at mount time can be a very slow process, especially for large file systems that is just recovered from a crash. Since the summary is already re-sync'ed every 30 second, we will not lag behind too much after a crash. With this consideration in mind, it is more reasonable to transfer the responsibility to background fsck, to reduce the delay after a crash. Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to control this behavior. When set to nonzero, we will get the "old" behavior, that the summary is computed immediately at mount time. Add five new sysctl variables to adjust ndir, nbfree, nifree, nffree and numclusters respectively. Teach fsck_ffs about these API, however, intentionally not to check the existence, since kernels without these sysctls must have recomputed the summary and hence no adjustments are necessary. This change has eliminated the usual tens of minutes of delay of mounting large dirty volumes. Reviewed by: mckusick MFC After: 1 week
2005-02-20 08:02:15 +00:00
* update an active filesystem. Eleven operations are provided:
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
*
* adjrefcnt(inode, amt) - adjusts the reference count on the
* specified inode by the specified amount. Under normal
* operation the count should always go down. Decrementing
* the count to zero will cause the inode to be freed.
* adjblkcnt(inode, amt) - adjust the number of blocks used to
* by the specifed amount.
The recomputation of file system summary at mount time can be a very slow process, especially for large file systems that is just recovered from a crash. Since the summary is already re-sync'ed every 30 second, we will not lag behind too much after a crash. With this consideration in mind, it is more reasonable to transfer the responsibility to background fsck, to reduce the delay after a crash. Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to control this behavior. When set to nonzero, we will get the "old" behavior, that the summary is computed immediately at mount time. Add five new sysctl variables to adjust ndir, nbfree, nifree, nffree and numclusters respectively. Teach fsck_ffs about these API, however, intentionally not to check the existence, since kernels without these sysctls must have recomputed the summary and hence no adjustments are necessary. This change has eliminated the usual tens of minutes of delay of mounting large dirty volumes. Reviewed by: mckusick MFC After: 1 week
2005-02-20 08:02:15 +00:00
* adjndir, adjbfree, adjifree, adjffree, adjnumclusters(amt) -
* adjust the superblock summary.
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
* freedirs(inode, count) - directory inodes [inode..inode + count - 1]
* are marked as free. Inodes should never have to be marked
* as in use.
* freefiles(inode, count) - file inodes [inode..inode + count - 1]
* are marked as free. Inodes should never have to be marked
* as in use.
* freeblks(blockno, size) - blocks [blockno..blockno + size - 1]
* are marked as free. Blocks should never have to be marked
* as in use.
* setflags(flags, set/clear) - the fs_flags field has the specified
* flags set (second parameter +1) or cleared (second parameter -1).
*/
Remove __P.
2002-03-19 22:40:48 +00:00
static int sysctl_ffs_fsck(SYSCTL_HANDLER_ARGS);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
SYSCTL_PROC(_vfs_ffs, FFS_ADJ_REFCNT, adjrefcnt, CTLFLAG_WR|CTLTYPE_STRUCT,
0, 0, sysctl_ffs_fsck, "S,fsck", "Adjust Inode Reference Count");
Make a some SYSCTL_NODEs and some of FFS's VFS_ methods static.
2005-02-10 12:20:08 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_BLKCNT, adjblkcnt, CTLFLAG_WR,
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
sysctl_ffs_fsck, "Adjust Inode Used Blocks Count");
The recomputation of file system summary at mount time can be a very slow process, especially for large file systems that is just recovered from a crash. Since the summary is already re-sync'ed every 30 second, we will not lag behind too much after a crash. With this consideration in mind, it is more reasonable to transfer the responsibility to background fsck, to reduce the delay after a crash. Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to control this behavior. When set to nonzero, we will get the "old" behavior, that the summary is computed immediately at mount time. Add five new sysctl variables to adjust ndir, nbfree, nifree, nffree and numclusters respectively. Teach fsck_ffs about these API, however, intentionally not to check the existence, since kernels without these sysctls must have recomputed the summary and hence no adjustments are necessary. This change has eliminated the usual tens of minutes of delay of mounting large dirty volumes. Reviewed by: mckusick MFC After: 1 week
2005-02-20 08:02:15 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_NDIR, adjndir, CTLFLAG_WR,
sysctl_ffs_fsck, "Adjust number of directories");
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_NBFREE, adjnbfree, CTLFLAG_WR,
sysctl_ffs_fsck, "Adjust number of free blocks");
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_NIFREE, adjnifree, CTLFLAG_WR,
sysctl_ffs_fsck, "Adjust number of free inodes");
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_NFFREE, adjnffree, CTLFLAG_WR,
sysctl_ffs_fsck, "Adjust number of free frags");
static SYSCTL_NODE(_vfs_ffs, FFS_ADJ_NUMCLUSTERS, adjnumclusters, CTLFLAG_WR,
sysctl_ffs_fsck, "Adjust number of free clusters");
Make a some SYSCTL_NODEs and some of FFS's VFS_ methods static.
2005-02-10 12:20:08 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_DIR_FREE, freedirs, CTLFLAG_WR,
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
sysctl_ffs_fsck, "Free Range of Directory Inodes");
Make a some SYSCTL_NODEs and some of FFS's VFS_ methods static.
2005-02-10 12:20:08 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_FILE_FREE, freefiles, CTLFLAG_WR,
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
sysctl_ffs_fsck, "Free Range of File Inodes");
Make a some SYSCTL_NODEs and some of FFS's VFS_ methods static.
2005-02-10 12:20:08 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_BLK_FREE, freeblks, CTLFLAG_WR,
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
sysctl_ffs_fsck, "Free Range of Blocks");
Make a some SYSCTL_NODEs and some of FFS's VFS_ methods static.
2005-02-10 12:20:08 +00:00
static SYSCTL_NODE(_vfs_ffs, FFS_SET_FLAGS, setflags, CTLFLAG_WR,
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
sysctl_ffs_fsck, "Change Filesystem Flags");
#ifdef DEBUG
static int fsckcmds = 0;
SYSCTL_INT(_debug, OID_AUTO, fsckcmds, CTLFLAG_RW, &fsckcmds, 0, "");
#endif /* DEBUG */
static int
sysctl_ffs_fsck(SYSCTL_HANDLER_ARGS)
{
struct fsck_cmd cmd;
struct ufsmount *ump;
struct vnode *vp;
struct inode *ip;
struct mount *mp;
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
long blkcnt, blksize;
struct file *fp;
int filetype, error;
if (req->newlen > sizeof cmd)
return (EBADRPC);
if ((error = SYSCTL_IN(req, &cmd, sizeof cmd)) != 0)
return (error);
if (cmd.version != FFS_CMD_VERSION)
return (ERPCMISMATCH);
if ((error = getvnode(curproc->p_fd, cmd.handle, &fp)) != 0)
return (error);
Bow to the whining masses and change a union back into void *. Retain removal of unnecessary casts and throw in some minor cleanups to see if anyone complains, just for the hell of it.
2003-01-13 00:33:17 +00:00
vn_start_write(fp->f_data, &mp, V_WAIT);
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
if (mp == 0 || strncmp(mp->mnt_stat.f_fstypename, "ufs", MFSNAMELEN)) {
vn_finished_write(mp);
SMP Lock struct file, filedesc and the global file list. Seigo Tanimura (tanimura) posted the initial delta. I've polished it quite a bit reducing the need for locking and adapting it for KSE. Locks: 1 mutex in each filedesc protects all the fields. protects "struct file" initialization, while a struct file is being changed from &badfileops -> &pipeops or something the filedesc should be locked. 1 mutex in each struct file protects the refcount fields. doesn't protect anything else. the flags used for garbage collection have been moved to f_gcflag which was the FILLER short, this doesn't need locking because the garbage collection is a single threaded container. could likely be made to use a pool mutex. 1 sx lock for the global filelist. struct file * fhold(struct file *fp); /* increments reference count on a file */ struct file * fhold_locked(struct file *fp); /* like fhold but expects file to locked */ struct file * ffind_hold(struct thread *, int fd); /* finds the struct file in thread, adds one reference and returns it unlocked */ struct file * ffind_lock(struct thread *, int fd); /* ffind_hold, but returns file locked */ I still have to smp-safe the fget cruft, I'll get to that asap.
2002-01-13 11:58:06 +00:00
fdrop(fp, curthread);
Check that background fsck operation is being done on a ufs filesystem. Obtained from: Robert Watson <rwatson@FreeBSD.org>
2001-03-23 20:58:25 +00:00
return (EINVAL);
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
}
if (mp->mnt_flag & MNT_RDONLY) {
vn_finished_write(mp);
SMP Lock struct file, filedesc and the global file list. Seigo Tanimura (tanimura) posted the initial delta. I've polished it quite a bit reducing the need for locking and adapting it for KSE. Locks: 1 mutex in each filedesc protects all the fields. protects "struct file" initialization, while a struct file is being changed from &badfileops -> &pipeops or something the filedesc should be locked. 1 mutex in each struct file protects the refcount fields. doesn't protect anything else. the flags used for garbage collection have been moved to f_gcflag which was the FILLER short, this doesn't need locking because the garbage collection is a single threaded container. could likely be made to use a pool mutex. 1 sx lock for the global filelist. struct file * fhold(struct file *fp); /* increments reference count on a file */ struct file * fhold_locked(struct file *fp); /* like fhold but expects file to locked */ struct file * ffind_hold(struct thread *, int fd); /* finds the struct file in thread, adds one reference and returns it unlocked */ struct file * ffind_lock(struct thread *, int fd); /* ffind_hold, but returns file locked */ I still have to smp-safe the fget cruft, I'll get to that asap.
2002-01-13 11:58:06 +00:00
fdrop(fp, curthread);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
return (EROFS);
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
}
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ump = VFSTOUFS(mp);
fs = ump->um_fs;
filetype = IFREG;
switch (oidp->oid_number) {
case FFS_SET_FLAGS:
#ifdef DEBUG
if (fsckcmds)
printf("%s: %s flags\n", mp->mnt_stat.f_mntonname,
cmd.size > 0 ? "set" : "clear");
#endif /* DEBUG */
if (cmd.size > 0)
fs->fs_flags |= (long)cmd.value;
else
fs->fs_flags &= ~(long)cmd.value;
break;
case FFS_ADJ_REFCNT:
#ifdef DEBUG
if (fsckcmds) {
Fixed some printf format errors (4 new ones reported by gcc and 5 nearby old ones not reported by gcc). This helps unbreak LINT.
2002-07-08 12:42:29 +00:00
printf("%s: adjust inode %jd count by %jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value,
(intmax_t)cmd.size);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
#endif /* DEBUG */
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
if ((error = ffs_vget(mp, (ino_t)cmd.value, LK_EXCLUSIVE, &vp)))
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
break;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ip = VTOI(vp);
ip->i_nlink += cmd.size;
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_nlink, ip->i_nlink);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ip->i_effnlink += cmd.size;
ip->i_flag |= IN_CHANGE;
if (DOINGSOFTDEP(vp))
softdep_change_linkcnt(ip);
vput(vp);
break;
case FFS_ADJ_BLKCNT:
#ifdef DEBUG
if (fsckcmds) {
Fixed some printf format errors (4 new ones reported by gcc and 5 nearby old ones not reported by gcc). This helps unbreak LINT.
2002-07-08 12:42:29 +00:00
printf("%s: adjust inode %jd block count by %jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value,
(intmax_t)cmd.size);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
#endif /* DEBUG */
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
if ((error = ffs_vget(mp, (ino_t)cmd.value, LK_EXCLUSIVE, &vp)))
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
break;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ip = VTOI(vp);
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + cmd.size);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
ip->i_flag |= IN_CHANGE;
vput(vp);
break;
case FFS_DIR_FREE:
filetype = IFDIR;
/* fall through */
case FFS_FILE_FREE:
#ifdef DEBUG
if (fsckcmds) {
if (cmd.size == 1)
printf("%s: free %s inode %d\n",
mp->mnt_stat.f_mntonname,
filetype == IFDIR ? "directory" : "file",
(ino_t)cmd.value);
else
printf("%s: free %s inodes %d-%d\n",
mp->mnt_stat.f_mntonname,
filetype == IFDIR ? "directory" : "file",
Fix typo ); -> ,
2001-03-24 15:25:04 +00:00
(ino_t)cmd.value,
Fix warning: 1973: warning: int format, long int arg (arg 5)
2001-06-15 07:44:39 +00:00
(ino_t)(cmd.value + cmd.size - 1));
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
#endif /* DEBUG */
while (cmd.size > 0) {
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
if ((error = ffs_freefile(ump, fs, ump->um_devvp,
cmd.value, filetype)))
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
break;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
cmd.size -= 1;
cmd.value += 1;
}
break;
case FFS_BLK_FREE:
#ifdef DEBUG
if (fsckcmds) {
if (cmd.size == 1)
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf("%s: free block %jd\n",
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
mp->mnt_stat.f_mntonname,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)cmd.value);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
else
intmax_t is printed with %jd, not %lld.
2002-09-19 03:55:30 +00:00
printf("%s: free blocks %jd-%jd\n",
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
mp->mnt_stat.f_mntonname,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)cmd.value,
(intmax_t)cmd.value + cmd.size - 1);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
#endif /* DEBUG */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = cmd.value;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
blkcnt = cmd.size;
blksize = fs->fs_frag - (blkno % fs->fs_frag);
while (blkcnt > 0) {
if (blksize > blkcnt)
blksize = blkcnt;
- Don't use atomic operations to deal with the active array, instead it is now quite naturally protected by the ufsmount mutex. - Use the ufs lock to protect various fields in struct fs, primarily the cg summary needs protection to avoid allocation races. Several functions have been slightly re-arranged to reduce the number of lock operations. - Adjust several functions (blkfree, freefile, etc.) to accept a ufsmount as an argument so that we may access the ufs lock. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:08:35 +00:00
ffs_blkfree(ump, fs, ump->um_devvp, blkno,
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
blksize * fs->fs_fsize, ROOTINO);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
blkno += blksize;
blkcnt -= blksize;
blksize = fs->fs_frag;
}
break;
The recomputation of file system summary at mount time can be a very slow process, especially for large file systems that is just recovered from a crash. Since the summary is already re-sync'ed every 30 second, we will not lag behind too much after a crash. With this consideration in mind, it is more reasonable to transfer the responsibility to background fsck, to reduce the delay after a crash. Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to control this behavior. When set to nonzero, we will get the "old" behavior, that the summary is computed immediately at mount time. Add five new sysctl variables to adjust ndir, nbfree, nifree, nffree and numclusters respectively. Teach fsck_ffs about these API, however, intentionally not to check the existence, since kernels without these sysctls must have recomputed the summary and hence no adjustments are necessary. This change has eliminated the usual tens of minutes of delay of mounting large dirty volumes. Reviewed by: mckusick MFC After: 1 week
2005-02-20 08:02:15 +00:00
/*
* Adjust superblock summaries. fsck(8) is expected to
* submit deltas when necessary.
*/
case FFS_ADJ_NDIR:
#ifdef DEBUG
if (fsckcmds) {
printf("%s: adjust number of directories by %jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value);
}
#endif /* DEBUG */
fs->fs_cstotal.cs_ndir += cmd.value;
break;
case FFS_ADJ_NBFREE:
#ifdef DEBUG
if (fsckcmds) {
printf("%s: adjust number of free blocks by %+jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value);
}
#endif /* DEBUG */
fs->fs_cstotal.cs_nbfree += cmd.value;
break;
case FFS_ADJ_NIFREE:
#ifdef DEBUG
if (fsckcmds) {
printf("%s: adjust number of free inodes by %+jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value);
}
#endif /* DEBUG */
fs->fs_cstotal.cs_nifree += cmd.value;
break;
case FFS_ADJ_NFFREE:
#ifdef DEBUG
if (fsckcmds) {
printf("%s: adjust number of free frags by %+jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value);
}
#endif /* DEBUG */
fs->fs_cstotal.cs_nffree += cmd.value;
break;
case FFS_ADJ_NUMCLUSTERS:
#ifdef DEBUG
if (fsckcmds) {
printf("%s: adjust number of free clusters by %+jd\n",
mp->mnt_stat.f_mntonname, (intmax_t)cmd.value);
}
#endif /* DEBUG */
fs->fs_cstotal.cs_numclusters += cmd.value;
break;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
default:
#ifdef DEBUG
if (fsckcmds) {
printf("Invalid request %d from fsck\n",
oidp->oid_number);
}
#endif /* DEBUG */
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
error = EINVAL;
break;
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
SMP Lock struct file, filedesc and the global file list. Seigo Tanimura (tanimura) posted the initial delta. I've polished it quite a bit reducing the need for locking and adapting it for KSE. Locks: 1 mutex in each filedesc protects all the fields. protects "struct file" initialization, while a struct file is being changed from &badfileops -> &pipeops or something the filedesc should be locked. 1 mutex in each struct file protects the refcount fields. doesn't protect anything else. the flags used for garbage collection have been moved to f_gcflag which was the FILLER short, this doesn't need locking because the garbage collection is a single threaded container. could likely be made to use a pool mutex. 1 sx lock for the global filelist. struct file * fhold(struct file *fp); /* increments reference count on a file */ struct file * fhold_locked(struct file *fp); /* like fhold but expects file to locked */ struct file * ffind_hold(struct thread *, int fd); /* finds the struct file in thread, adds one reference and returns it unlocked */ struct file * ffind_lock(struct thread *, int fd); /* ffind_hold, but returns file locked */ I still have to smp-safe the fget cruft, I'll get to that asap.
2002-01-13 11:58:06 +00:00
fdrop(fp, curthread);
Background fsck sysctl operations must use vn_start_write and vn_finished_write so that they do not attempt to modify a suspended filesystem.
2001-04-17 05:06:37 +00:00
vn_finished_write(mp);
return (error);
Add kernel support for running fsck on active filesystems.
2001-03-21 04:09:01 +00:00
}
Reference in New Issue Copy Permalink