freebsd-nq/sys/modules/mfi/Makefile

# $FreeBSD$

.PATH: ${.CURDIR}/../../dev/mfi

SUBDIR= mfip

.if ${MACHINE_ARCH} == "i386" || ${MACHINE_ARCH} == "amd64"
SUBDIR+= mfi_linux
.endif

KMOD=	mfi
SRCS=	mfi.c mfi_pci.c mfi_disk.c mfi_debug.c
SRCS+=	opt_mfi.h opt_cam.h
SRCS+=	device_if.h bus_if.h pci_if.h

#CFLAGS += -DMFI_DEBUG

.include <bsd.kmod.mk>
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days 2006-03-25 06:14:32 +00:00			`# $FreeBSD$`

			`.PATH: ${.CURDIR}/../../dev/mfi`

Add the 'mfip' sub-driver for gaining SCSI-passthrough access to devices on an MFI controller. 2007-05-16 17:19:47 +00:00			`SUBDIR= mfip`

Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems. 2006-05-18 23:30:48 +00:00			`.if ${MACHINE_ARCH} == "i386" \|\| ${MACHINE_ARCH} == "amd64"`
Add the 'mfip' sub-driver for gaining SCSI-passthrough access to devices on an MFI controller. 2007-05-16 17:19:47 +00:00			`SUBDIR+= mfi_linux`
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems. 2006-05-18 23:30:48 +00:00			`.endif`

Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days 2006-03-25 06:14:32 +00:00			`KMOD= mfi`
Update the mfi module build with the mfi_debug.c file. 2006-09-25 11:42:12 +00:00			`SRCS= mfi.c mfi_pci.c mfi_disk.c mfi_debug.c`
Add the 'mfip' sub-driver for gaining SCSI-passthrough access to devices on an MFI controller. 2007-05-16 17:19:47 +00:00			`SRCS+= opt_mfi.h opt_cam.h`
Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days 2006-03-25 06:14:32 +00:00			`SRCS+= device_if.h bus_if.h pci_if.h`

Update the mfi module build with the mfi_debug.c file. 2006-09-25 11:42:12 +00:00			`#CFLAGS += -DMFI_DEBUG`

Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This driver provides a block interface to logical disks on the card and a minimal management device. It is MPSAFE, INTR_FAST, and 64-bit capable. Thanks to Dell for providing hardware to test with and IronPort for sponsoring the work. Sponsored by: Dell, Ironport MFC After: 3 days 2006-03-25 06:14:32 +00:00			`.include <bsd.kmod.mk>`