d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
912e44b663
freebsd-nq/usr.sbin/ppp/throughput.h

71 lines
2.9 KiB
C
Raw Normal View History

Add (BSD) copyright headers.
1997-12-21 12:11:13 +00:00
/*-
* Copyright (c) 1997 Brian Somers <brian@Awfulhak.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:35:59 +00:00
* $FreeBSD$
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
*/
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
#define SAMPLE_PERIOD 5 /* Default sample period */
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
Add the ``clear'' function. Mostly submitted by: "Stephane E. Potvin" <sepotvin@videotron.ca>
1998-06-12 20:12:26 +00:00
#define THROUGHPUT_OVERALL 0x0001
#define THROUGHPUT_CURRENT 0x0002
#define THROUGHPUT_PEAK 0x0004
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
#define THROUGHPUT_ALL 0x0007
Add the ``clear'' function. Mostly submitted by: "Stephane E. Potvin" <sepotvin@videotron.ca>
1998-06-12 20:12:26 +00:00
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
struct pppThroughput {
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
time_t uptime, downtime;
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
unsigned long long OctetsIn;
unsigned long long OctetsOut;
Support radius accounting, and add a packet count to throughput statistics as a side effect. Submitted by: Marcin Cieslak <saper@system.pl> with some tweaks to RAD_ACCT_SESSION_ID and RAD_ACCT_MULTI_SESSION_ID generation by me.
2000-08-28 22:44:54 +00:00
unsigned long long PacketsIn;
unsigned long long PacketsOut;
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
int SamplePeriod;
Maintain input and output throughput averages and choose the highest of the two when calculating the MP throughput average for the ``set autoload'' implementation. This makes more sense as all links I know of are full-duplex. This also means that people may need to adjust their autoload settings as 100% bandwidth is now the theoretical maximum rather than 200% (but of course, halfing the current settings is probably not the correct answer either!). This involves a ppp version bump as we need to pass an extra throughput array through the MP local domain socket.
2000-08-15 10:25:42 +00:00
struct {
unsigned long long *SampleOctets;
unsigned long long OctetsPerSecond;
} in, out;
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
unsigned long long BestOctetsPerSecond;
Show the time that we reached maximum throughput. Submitted by: "Stephane E. Potvin" <sepotvin@videotron.ca>
1998-06-09 18:49:10 +00:00
time_t BestOctetsPerSecondTime;
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
int nSample;
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
unsigned rolling : 1;
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
struct pppTimer Timer;
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
struct {
void *data;
void (*fn)(void *v);
} callback;
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
};
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
extern void throughput_init(struct pppThroughput *, int);
extern void throughput_destroy(struct pppThroughput *);
Deglobalise `struct prompt': o Our diagnostic socket has its password set in the `set socket' line only (not in ppp.secret). o Passwords are per server socket (*VarAuthKey are gone) o Authority is per prompt (VarLocalAuth is gone). o Local logging is per prompt. o Add a `show who' command to see who's connected. No identd routine - just a `where the connection came from' display. o SIGUSR1 is disabled for now - we have no way of choosing a password for the socket created :-( Prompts are attached as a list of `struct descriptor's in struct bundle, and serviced under the bundles descriptor service routines. Ultimately, everything should be done like this. Cosmetic: o alphabeticalise SRCS in Makefile. o Add a few comments in command.h TODO: Start checking that we don't overflow the descriptor sets in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
extern void throughput_disp(struct pppThroughput *, struct prompt *);
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
extern void throughput_log(struct pppThroughput *, int, const char *);
o Move the accept/deny/disable/enable globals either to the bundle (non-negotiated vars) or to their respective IPCP, LCP or CCP. o Enable rolling throughput statistics by default. o Remove the `display' command. These values now appear in `show bundle', `show ipcp', `show ccp' and `show lcp'. o Initialise auth name & key at bundle create time (oops). o Rename pppd-deflate (the id-24 hack) to deflate24. o Don't send both a REJ and a NAK to an IPCP or LCP REQ. Favour the REJ (already done at the CCP level). o Recurse in datalink_UpdateSet() when we change state, otherwise we end up setting no descriptors and getting jammed in the imminent select() instead of doing the dial/login/hangup. o Display our CHAP encryption method despite being built with DES. o Display VJ as not negotiated in ``show ipcp'' when necessary.
1998-04-16 00:26:21 +00:00
extern void throughput_start(struct pppThroughput *, const char *, int);
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
extern void throughput_restart(struct pppThroughput *, const char *, int);
Add throughput logging (disabled by default). Use "enable throughput" to see modem & IPCP throughput. Removed an extraneous prompt()
1997-11-18 14:52:08 +00:00
extern void throughput_stop(struct pppThroughput *);
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
extern void throughput_addin(struct pppThroughput *, long long);
extern void throughput_addout(struct pppThroughput *, long long);
Add the ``clear'' function. Mostly submitted by: "Stephane E. Potvin" <sepotvin@videotron.ca>
1998-06-12 20:12:26 +00:00
extern void throughput_clear(struct pppThroughput *, int, struct prompt *);
o Obsolete the undocumented ``set weight'' command. o If we're using RADIUS and the RADIUS mtu is less than our peers mru/mrru, reduce our mtu to this value for NetBSD too. o Make struct throughput's sample period dynamic and tweak the ppp version number to reflect the extra stuff being passed through the local domain socket as a result (MP mode). o Measure the current throughput based on the number of samples actually taken rather than on the full sample period. o Keep the throughput statisics persistent while being passed to another ppp invocation through the local domain socket. o When showing throughput statistics after the timer has stopped, use the stopped time for overall calculations, not the current time. Also show the stopped time and how long the current throughput has been sampled for. o Use time() consistently in throughput.c o Tighten up the ``show bundle'' output. o Introduce the ``set bandwidth'' command. o Rewrite the ``set autoload'' command. It now takes three arguments and works based on a rolling bundle throughput average compared against the theoretical bundle bandwidth over a given period (read: it's now functional).
1999-08-05 10:32:16 +00:00
extern void throughput_callback(struct pppThroughput *, void (*)(void *),
void *);
extern int throughput_uptime(struct pppThroughput *);
Reference in New Issue Copy Permalink