d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
92ca0e81b8
freebsd-nq/lib/libc/sys/lstat.c

51 lines
1.9 KiB
C
Raw Normal View History

Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
/*-
Regularize my copyright notice o Remove All Rights Reserved from my notices o imp@FreeBSD.org everywhere o regularize punctiation, eliminate date ranges o Make sure that it's clear that I don't claim All Rights reserved by listing All Rights Reserved on same line as other copyright holders (but not me). Other such holders are also listed last where it's clear.
2019-12-04 16:56:11 +00:00
* Copyright (c) 2012 Gleb Kurtsou <gleb@FreeBSD.org> All rights reserved.
Forward compatibility for ino64. Add forward compatibility so that new binaries can run on old kernels. If the new system call from ino64 isn't available on your system, then the old one will be used and the results translated. The stat and statfs families of functions are fully emulated. While not required by policy, in this case it is helpful to our users to provide this compatibility. In this case, it allows rollback of the kernel after installing a new userland should a problem be discovered. It also prevents foot-shooting if a user does an install before rebooting with the new kernel. Finally, it allows the use case where one needs to run new binaries on an old kernel as part of an upgrade process. The getdirentries family uses tricks that may not work on remote filesystems. Specifically, it uses a buffer 1/4 the size requested to get the data from he old syscall. The code carefully uses direct syscalls for old system calls to avoid referencing freebsd11_* symbols, which contaminate ld-elf.so.1's export table due to its use of stat functions, which causes errno to be incorrect in client programs due to the wrong *stat* function being resolved in some cases. This code should removed sometime after 12 is branched. Tested on: 12-current binaries on a 10.3-beta kernel run and return consistent results. 12-current kernel and userland with packages from before ino64 was committed also work. Differential Revision: https://reviews.freebsd.org/D11185 Reviewed by: kib@, emaste@
2017-06-23 18:06:20 +00:00
* Copyright (c) 2017 M. Warner Losh <imp@FreeBSD.org>
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "namespace.h"
#include <sys/param.h>
#include <sys/syscall.h>
Forward compatibility for ino64. Add forward compatibility so that new binaries can run on old kernels. If the new system call from ino64 isn't available on your system, then the old one will be used and the results translated. The stat and statfs families of functions are fully emulated. While not required by policy, in this case it is helpful to our users to provide this compatibility. In this case, it allows rollback of the kernel after installing a new userland should a problem be discovered. It also prevents foot-shooting if a user does an install before rebooting with the new kernel. Finally, it allows the use case where one needs to run new binaries on an old kernel as part of an upgrade process. The getdirentries family uses tricks that may not work on remote filesystems. Specifically, it uses a buffer 1/4 the size requested to get the data from he old syscall. The code carefully uses direct syscalls for old system calls to avoid referencing freebsd11_* symbols, which contaminate ld-elf.so.1's export table due to its use of stat functions, which causes errno to be incorrect in client programs due to the wrong *stat* function being resolved in some cases. This code should removed sometime after 12 is branched. Tested on: 12-current binaries on a 10.3-beta kernel run and return consistent results. 12-current kernel and userland with packages from before ino64 was committed also work. Differential Revision: https://reviews.freebsd.org/D11185 Reviewed by: kib@, emaste@
2017-06-23 18:06:20 +00:00
#include "compat-ino64.h"
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
#include <unistd.h>
Forward compatibility for ino64. Add forward compatibility so that new binaries can run on old kernels. If the new system call from ino64 isn't available on your system, then the old one will be used and the results translated. The stat and statfs families of functions are fully emulated. While not required by policy, in this case it is helpful to our users to provide this compatibility. In this case, it allows rollback of the kernel after installing a new userland should a problem be discovered. It also prevents foot-shooting if a user does an install before rebooting with the new kernel. Finally, it allows the use case where one needs to run new binaries on an old kernel as part of an upgrade process. The getdirentries family uses tricks that may not work on remote filesystems. Specifically, it uses a buffer 1/4 the size requested to get the data from he old syscall. The code carefully uses direct syscalls for old system calls to avoid referencing freebsd11_* symbols, which contaminate ld-elf.so.1's export table due to its use of stat functions, which causes errno to be incorrect in client programs due to the wrong *stat* function being resolved in some cases. This code should removed sometime after 12 is branched. Tested on: 12-current binaries on a 10.3-beta kernel run and return consistent results. 12-current kernel and userland with packages from before ino64 was committed also work. Differential Revision: https://reviews.freebsd.org/D11185 Reviewed by: kib@, emaste@
2017-06-23 18:06:20 +00:00
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
#include "libc_private.h"
int
lstat(const char *path, struct stat *sb)
{
Forward compatibility for ino64. Add forward compatibility so that new binaries can run on old kernels. If the new system call from ino64 isn't available on your system, then the old one will be used and the results translated. The stat and statfs families of functions are fully emulated. While not required by policy, in this case it is helpful to our users to provide this compatibility. In this case, it allows rollback of the kernel after installing a new userland should a problem be discovered. It also prevents foot-shooting if a user does an install before rebooting with the new kernel. Finally, it allows the use case where one needs to run new binaries on an old kernel as part of an upgrade process. The getdirentries family uses tricks that may not work on remote filesystems. Specifically, it uses a buffer 1/4 the size requested to get the data from he old syscall. The code carefully uses direct syscalls for old system calls to avoid referencing freebsd11_* symbols, which contaminate ld-elf.so.1's export table due to its use of stat functions, which causes errno to be incorrect in client programs due to the wrong *stat* function being resolved in some cases. This code should removed sometime after 12 is branched. Tested on: 12-current binaries on a 10.3-beta kernel run and return consistent results. 12-current kernel and userland with packages from before ino64 was committed also work. Differential Revision: https://reviews.freebsd.org/D11185 Reviewed by: kib@, emaste@
2017-06-23 18:06:20 +00:00
struct freebsd11_stat stat11;
int rv;
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
Forward compatibility for ino64. Add forward compatibility so that new binaries can run on old kernels. If the new system call from ino64 isn't available on your system, then the old one will be used and the results translated. The stat and statfs families of functions are fully emulated. While not required by policy, in this case it is helpful to our users to provide this compatibility. In this case, it allows rollback of the kernel after installing a new userland should a problem be discovered. It also prevents foot-shooting if a user does an install before rebooting with the new kernel. Finally, it allows the use case where one needs to run new binaries on an old kernel as part of an upgrade process. The getdirentries family uses tricks that may not work on remote filesystems. Specifically, it uses a buffer 1/4 the size requested to get the data from he old syscall. The code carefully uses direct syscalls for old system calls to avoid referencing freebsd11_* symbols, which contaminate ld-elf.so.1's export table due to its use of stat functions, which causes errno to be incorrect in client programs due to the wrong *stat* function being resolved in some cases. This code should removed sometime after 12 is branched. Tested on: 12-current binaries on a 10.3-beta kernel run and return consistent results. 12-current kernel and userland with packages from before ino64 was committed also work. Differential Revision: https://reviews.freebsd.org/D11185 Reviewed by: kib@, emaste@
2017-06-23 18:06:20 +00:00
if (__getosreldate() >= INO64_FIRST)
return (__sys_fstatat(AT_FDCWD, path, sb, AT_SYMLINK_NOFOLLOW));
rv = syscall(SYS_freebsd11_lstat, path, &stat11);
if (rv == 0)
__stat11_to_stat(&stat11, sb);
return (rv);
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
}
Reference in New Issue Copy Permalink