d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
93289cfcd2
freebsd-nq/sys/dev/ofw/ofw_subr.c

211 lines
6.1 KiB
C
Raw Normal View History

Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
/*-
* Copyright (c) 2015 Ian Lepore <ian@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The initial ofw_reg_to_paddr() implementation has been copied from powerpc
* ofw_machdep.c OF_decode_addr(). It was added by Marcel Moolenaar, who did not
* assert copyright with the addition but still deserves credit for the work.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
Add missing include of sys/boot.h
2018-07-13 18:00:13 +00:00
#include <sys/boot.h>
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
#include <sys/bus.h>
#include <sys/libkern.h>
Add a ofw_parse_bootargs function, and use it for powerpc Summary: If the environment variable is set, U-boot adds a 'bootargs' property to /chosen. This is already handled by ARM and MIPS, but should be handled in a central location. For now, ofw_subr.c is a good place until we determine if it should be moved to init_main.c, or somewhere more central to all architectures. Eventually arm and mips should be modified to use ofw_parse_bootargs() as well, rather than using the duplicate code already. Reviewed By: adrian Differential Revision: https://reviews.freebsd.org/D7846
2016-09-21 02:28:39 +00:00
#include <sys/reboot.h>
Fix build for i386 and arm64 after r295755 - Take bus_space_tag_t type into consideration when returning default, zero value. - Include missing rman.h required by ofw_pci.h
2016-02-18 15:44:45 +00:00
#include <sys/rman.h>
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
#include <machine/bus.h>
#include <dev/ofw/openfirm.h>
Extract common code from PowerPC's ofw_pci Import portions of the PowerPC OF PCI implementation into new file "ofw_pci.c", common for other platforms. The files ofw_pci.c and ofw_pci.h from sys/powerpc/ofw no longer exist. All required declarations are moved to sys/dev/ofw/ofw_pci.h. This creates a new ofw_pci_write_ivar() function and modifies ofw_pci_nranges(), ofw_pci_read_ivar(), ofw_pci_route_interrupt() methods. Most functions contain existing ppc implementations in the majority unchanged. Now there is no need to have multiple identical copies of methods for various architectures. Submitted by: Marcin Mazurek <mma@semihalf.com> Obtained from: Semihalf Sponsored by: Annapurna Labs Reviewed by: jhibbits, mmel Differential Revision: https://reviews.freebsd.org/D4879
2016-02-18 13:07:21 +00:00
#include <dev/ofw/ofw_pci.h>
Revert r295756: Extract common code from PowerPC's ofw_pci Import portions of the PowerPC OF PCI implementation into new file "ofw_pci.c", common for other platforms. The files ofw_pci.c and ofw_pci.h from sys/powerpc/ofw no longer exist. All required declarations are moved to sys/dev/ofw/ofw_pci.h. This creates a new ofw_pci_write_ivar() function and modifies ofw_pci_nranges(), ofw_pci_read_ivar(), ofw_pci_route_interrupt() methods. Most functions contain existing ppc implementations in the majority unchanged. Now there is no need to have multiple identical copies of methods for various architectures. Submitted by: Marcin Mazurek <mma@semihalf.com> Obtained from: Semihalf Sponsored by: Annapurna Labs Reviewed by: jhibbits, mmel Differential Revision: https://reviews.freebsd.org/D4879 This needs to return to the drawing board as it breaks both PowerPC and Sparc64 build. Pointed out by: jhibbits
2016-02-20 12:28:20 +00:00
#include <dev/ofw/ofw_subr.h>
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
static void
get_addr_props(phandle_t node, uint32_t *addrp, uint32_t *sizep, int *pcip)
{
char type[64];
uint32_t addr, size;
int pci, res;
res = OF_getencprop(node, "#address-cells", &addr, sizeof(addr));
if (res == -1)
addr = 2;
res = OF_getencprop(node, "#size-cells", &size, sizeof(size));
if (res == -1)
size = 1;
pci = 0;
if (addr == 3 && size == 2) {
res = OF_getprop(node, "device_type", type, sizeof(type));
if (res != -1) {
type[sizeof(type) - 1] = '\0';
Check for a 'pci' prefix rather than a full match in get_addr_props Summary: Newer OPAL device trees, such as those on POWER9 systems, use 'pciex' for device_type, not 'pci'. Rather than enumerating all possible variants, just check for a 'pci' prefix. Reviewed by: nwhitehorn, breno.leitao_gmail.com Differential Revision: https://reviews.freebsd.org/D15817
2018-06-15 18:55:02 +00:00
if (strcmp(type, "pci") == 0 ||
strcmp(type, "pciex")== 0)
pci = 1;
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
}
}
if (addrp != NULL)
*addrp = addr;
if (sizep != NULL)
*sizep = size;
if (pcip != NULL)
*pcip = pci;
}
int
ofw_reg_to_paddr(phandle_t dev, int regno, bus_addr_t *paddr,
bus_size_t *psize, pcell_t *ppci_hi)
{
ofw: ofw_reg_to_paddr: Use a 256 static array for the cell Some hardware needs more than 32, bump this value. We cannot use the _alloc for of getencprop as this function is called too early in the boot before pmap is initialized and we only have 2k of stack when cninit is called. Discussed with: ian
2019-08-07 13:13:16 +00:00
static pcell_t cell[256];
pcell_t pci_hi;
When finding the physical address of a device allow intermediate addresses to be 64-bit on 32-bit architectures. It is not uncommon for device trees to use the upper 32-bits to store what effectively is an index into the parent ranges property. In this case, when running with a 32-bit bus_addr_t and bus_size_t, we would previously truncate the address, this may then incorrectly match the wrong range, and return the wrong address. Tested by: bz (earlier version)
2016-01-27 17:33:31 +00:00
uint64_t addr, raddr, baddr;
uint64_t size, rsize;
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
uint32_t c, nbridge, naddr, nsize;
phandle_t bridge, parent;
u_int spc, rspc;
int pci, pcib, res;
/* Sanity checking. */
if (dev == 0)
return (EINVAL);
bridge = OF_parent(dev);
if (bridge == 0)
return (EINVAL);
if (regno < 0)
return (EINVAL);
if (paddr == NULL || psize == NULL)
return (EINVAL);
get_addr_props(bridge, &naddr, &nsize, &pci);
res = OF_getencprop(dev, (pci) ? "assigned-addresses" : "reg",
cell, sizeof(cell));
if (res == -1)
return (ENXIO);
if (res % sizeof(cell[0]))
return (ENXIO);
res /= sizeof(cell[0]);
regno *= naddr + nsize;
if (regno + naddr + nsize > res)
return (EINVAL);
pci_hi = pci ? cell[regno] : OFW_PADDR_NOT_PCI;
spc = pci_hi & OFW_PCI_PHYS_HI_SPACEMASK;
addr = 0;
for (c = 0; c < naddr; c++)
addr = ((uint64_t)addr << 32) | cell[regno++];
size = 0;
for (c = 0; c < nsize; c++)
size = ((uint64_t)size << 32) | cell[regno++];
/*
* Map the address range in the bridge's decoding window as given
* by the "ranges" property. If a node doesn't have such property
* or the property is empty, we assume an identity mapping. The
* standard says a missing property indicates no possible mapping.
* This code is more liberal since the intended use is to get a
* console running early, and a printf to warn of malformed data
* is probably futile before the console is fully set up.
*/
parent = OF_parent(bridge);
while (parent != 0) {
get_addr_props(parent, &nbridge, NULL, &pcib);
res = OF_getencprop(bridge, "ranges", cell, sizeof(cell));
if (res < 1)
goto next;
if (res % sizeof(cell[0]))
return (ENXIO);
/* Capture pci_hi if we just transitioned onto a PCI bus. */
if (pcib && pci_hi == OFW_PADDR_NOT_PCI) {
pci_hi = cell[0];
spc = pci_hi & OFW_PCI_PHYS_HI_SPACEMASK;
}
res /= sizeof(cell[0]);
regno = 0;
while (regno < res) {
Fix the detection of IO/memory space changing across busses when the bus is not pci (and thus where, ironically, the whole situation is meaningless). This was not an error in the original code, it was introduced during my refactoring to commonize the routine. A small change a few lines above drove the need to make this change, and the error didn't show up on the platforms I initially tested with.
2015-12-22 00:53:19 +00:00
rspc = (pci ? cell[regno] : OFW_PADDR_NOT_PCI) &
OFW_PCI_PHYS_HI_SPACEMASK;
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
if (rspc != spc) {
regno += naddr + nbridge + nsize;
continue;
}
raddr = 0;
for (c = 0; c < naddr; c++)
raddr = ((uint64_t)raddr << 32) | cell[regno++];
rspc = (pcib)
? cell[regno] & OFW_PCI_PHYS_HI_SPACEMASK
: OFW_PADDR_NOT_PCI;
baddr = 0;
for (c = 0; c < nbridge; c++)
baddr = ((uint64_t)baddr << 32) | cell[regno++];
rsize = 0;
for (c = 0; c < nsize; c++)
rsize = ((uint64_t)rsize << 32) | cell[regno++];
if (addr < raddr || addr >= raddr + rsize)
continue;
addr = addr - raddr + baddr;
if (rspc != OFW_PADDR_NOT_PCI)
spc = rspc;
}
next:
bridge = parent;
parent = OF_parent(bridge);
get_addr_props(bridge, &naddr, &nsize, &pci);
}
When finding the physical address of a device allow intermediate addresses to be 64-bit on 32-bit architectures. It is not uncommon for device trees to use the upper 32-bits to store what effectively is an index into the parent ranges property. In this case, when running with a 32-bit bus_addr_t and bus_size_t, we would previously truncate the address, this may then incorrectly match the wrong range, and return the wrong address. Tested by: bz (earlier version)
2016-01-27 17:33:31 +00:00
KASSERT(addr <= BUS_SPACE_MAXADDR,
ofw_reg_to_paddr(): Fix minor typo in KASSERT message
2018-06-15 03:28:05 +00:00
("Bus address is too large: %jx", (uintmax_t)addr));
When finding the physical address of a device allow intermediate addresses to be 64-bit on 32-bit architectures. It is not uncommon for device trees to use the upper 32-bits to store what effectively is an index into the parent ranges property. In this case, when running with a 32-bit bus_addr_t and bus_size_t, we would previously truncate the address, this may then incorrectly match the wrong range, and return the wrong address. Tested by: bz (earlier version)
2016-01-27 17:33:31 +00:00
KASSERT(size <= BUS_SPACE_MAXSIZE,
Fix the value we print when the size is too large. While here fix the types we cast to to be unsigned as the data is unsigned. Reviewed by: ian
2016-01-27 17:47:07 +00:00
("Bus size is too large: %jx", (uintmax_t)size));
When finding the physical address of a device allow intermediate addresses to be 64-bit on 32-bit architectures. It is not uncommon for device trees to use the upper 32-bits to store what effectively is an index into the parent ranges property. In this case, when running with a 32-bit bus_addr_t and bus_size_t, we would previously truncate the address, this may then incorrectly match the wrong range, and return the wrong address. Tested by: bz (earlier version)
2016-01-27 17:33:31 +00:00
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
*paddr = addr;
*psize = size;
if (ppci_hi != NULL)
*ppci_hi = pci_hi;
return (0);
}
Add a ofw_parse_bootargs function, and use it for powerpc Summary: If the environment variable is set, U-boot adds a 'bootargs' property to /chosen. This is already handled by ARM and MIPS, but should be handled in a central location. For now, ofw_subr.c is a good place until we determine if it should be moved to init_main.c, or somewhere more central to all architectures. Eventually arm and mips should be modified to use ofw_parse_bootargs() as well, rather than using the duplicate code already. Reviewed By: adrian Differential Revision: https://reviews.freebsd.org/D7846
2016-09-21 02:28:39 +00:00
/*
* This is intended to be called early on, right after the OF system is
* initialized, so pmap may not be up yet.
*/
int
ofw_parse_bootargs(void)
{
phandle_t chosen;
char buf[2048]; /* early stack supposedly big enough */
int err;
chosen = OF_finddevice("/chosen");
[ofw] fix errneous checks for OF_finddevice(9) return value OF_finddevices returns ((phandle_t)-1) in case of failure. Some code in existing drivers checked return value to be equal to 0 or less/equal to 0 which is also wrong because phandle_t is unsigned type. Most of these checks were for negative cases that were never triggered so trhere was no impact on functionality. Reviewed by: nwhitehorn MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D14645
2018-03-20 00:03:49 +00:00
if (chosen == -1)
Add a ofw_parse_bootargs function, and use it for powerpc Summary: If the environment variable is set, U-boot adds a 'bootargs' property to /chosen. This is already handled by ARM and MIPS, but should be handled in a central location. For now, ofw_subr.c is a good place until we determine if it should be moved to init_main.c, or somewhere more central to all architectures. Eventually arm and mips should be modified to use ofw_parse_bootargs() as well, rather than using the duplicate code already. Reviewed By: adrian Differential Revision: https://reviews.freebsd.org/D7846
2016-09-21 02:28:39 +00:00
return (chosen);
if ((err = OF_getprop(chosen, "bootargs", buf, sizeof(buf))) != -1) {
Use boot_parse_* to parse command line args and retire cut-n-paste code that was substantially identical. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D16205
2018-07-13 16:43:17 +00:00
boothowto |= boot_parse_cmdline(buf);
Add a ofw_parse_bootargs function, and use it for powerpc Summary: If the environment variable is set, U-boot adds a 'bootargs' property to /chosen. This is already handled by ARM and MIPS, but should be handled in a central location. For now, ofw_subr.c is a good place until we determine if it should be moved to init_main.c, or somewhere more central to all architectures. Eventually arm and mips should be modified to use ofw_parse_bootargs() as well, rather than using the duplicate code already. Reviewed By: adrian Differential Revision: https://reviews.freebsd.org/D7846
2016-09-21 02:28:39 +00:00
return (0);
}
return (err);
}
Reference in New Issue Copy Permalink