d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
944d807245
freebsd-nq/sys/conf/files.alpha

219 lines
8.8 KiB
Plaintext
Raw Normal View History

Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
linux_genassym.o optional compat_linux \
dependency "$S/alpha/linux/linux_genassym.c" \
genassym builds need the -fno-common stripped out.
2002-01-11 07:52:02 +00:00
compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
no-obj no-implicit-rule \
clean "linux_genassym.o"
#
linux_assym.h optional compat_linux \
dependency "$S/kern/genassym.sh linux_genassym.o" \
compile-with "sh $S/kern/genassym.sh linux_genassym.o > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "linux_assym.h"
#
Add Yet Another Duplicate of the font.h and ukbdmap.h rules. Remove the font8x16.o glue, since that appears to have died ages ago and has no remaining references.
2002-09-19 03:36:25 +00:00
font.h optional sc_dflt_font \
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
#
atkbdmap.h optional atkbd_dflt_keymap \
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
no-obj no-implicit-rule before-depend \
clean "atkbdmap.h"
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#
Add Yet Another Duplicate of the font.h and ukbdmap.h rules. Remove the font8x16.o glue, since that appears to have died ages ago and has no remaining references.
2002-09-19 03:36:25 +00:00
ukbdmap.h optional ukbd_dflt_keymap \
compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "ukbdmap.h"
#
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/alpha-gdbstub.c optional ddb
alpha/alpha/api_up1000.c optional api_up1000
alpha/alpha/atomic.s standard
Delete the 'device-driver' suffix. It's been meaningless for a long time. On the VAX, it used to be used for special compilation to avoid the optimizer which would mess with memory mapped devices etc. These days we use 'volatile'.
1999-07-03 19:19:34 +00:00
alpha/alpha/autoconf.c standard
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/busdma_machdep.c standard
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
alpha/alpha/busspace.c standard
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/clock.c standard
alpha/alpha/clock_if.m standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/cpuconf.c standard
Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt disablement assumptions in kern_fork.c by adding another API call, cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h to <arch>/<arch>/critical.c (stage-2 will clean this up). Implement interrupt deferral for i386 that allows interrupts to remain enabled inside critical sections. This also fixes an IPI interlock bug, and requires uses of icu_lock to be enclosed in a true interrupt disablement. This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized, and will move cpu_critical*() into its own header file(s) + other things. This commit may break non-i386 architectures in trivial ways. This should be temporary. Reviewed by: core Approved by: core
2002-03-27 05:39:23 +00:00
alpha/alpha/critical.c standard
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/db_disasm.c optional ddb
alpha/alpha/db_interface.c optional ddb
alpha/alpha/db_trace.c optional ddb
A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian Angelini for allowing me to use his AS1000 to do the port. Note that this is untested on AlphaServer 1000A hardware. Reviewed by: dfr Tested by: Cristian Angelini <chr.ang@biella.alpcom.it> Obtained From: NetBSD
1999-12-01 15:25:04 +00:00
alpha/alpha/dec_1000a.c optional dec_1000a
alpha/alpha/dec_1000a.c optional dec_1000a
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/alpha/dec_2100_a50.c optional dec_2100_a50
Add AlphaServer 2000 (demi-sable), 2100 (sable), and 2100A (lynx) support. Only PCI and on-board ISA peripherials are supported at this time. This support has been only lightly tested due to a lack of response to my call for testers on the freebsd-alpha mailing list. It works quite well on the one AS2100 on which it has been tested, but it may not work on an AS2100A and should therefore be regarded as experimental.
2000-05-28 02:52:54 +00:00
alpha/alpha/dec_2100_a500.c optional dec_2100_a500
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/dec_axppci_33.c optional dec_axppci_33
alpha/alpha/dec_eb164.c optional dec_eb164
alpha/alpha/dec_eb64plus.c optional dec_eb64plus
alpha/alpha/dec_kn20aa.c optional dec_kn20aa
alpha/alpha/dec_kn300.c optional dec_kn300
alpha/alpha/dec_kn8ae.c optional dec_kn8ae
Lots of changes, including: * Support for AlphaStation 200, 250, 255, 400 * Untested support for UDB, Multia, AXPpci33 (Noname) * Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata) * Some minor fixes and improvements to interrupt handling. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata) Obtained from: NetBSD (some code for AS200, Miata, Noname)
1998-08-10 07:53:59 +00:00
alpha/alpha/dec_st550.c optional dec_st550
Add support for the DEC_ST6600 family of alphas. This includes the Compaq XP1000, AlphaServer DS20, AlphaServer DS10, and DP264 This has been tested *only* on XP1000's. I'll be interested to hear from owners of other types of DEC_ST6600 alphas. I'd like to thank Don Rice of Compaq for providing the documentation required to support this platform on FreeBSD. I'd also like to thank Doug Rabson for newbus, and for helping me get a multiple hoses working with newbus. Reviewed by: Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:22:14 +00:00
alpha/alpha/dec_st6600.c optional dec_st6600
Add support for TurboChannel alphas (DEC 3000/300 and 3000/500). Obtained from: NetBSD Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-08-20 08:27:11 +00:00
alpha/alpha/dec_3000_300.c optional dec_3000_300
alpha/alpha/dec_3000_500.c optional dec_3000_500
${MACHINE_ARCH}dump.c -> dump_machdep.c.
2002-05-13 02:40:21 +00:00
alpha/alpha/dump_machdep.c standard
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/elf_machdep.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/exception.s standard
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/fp_emulate.c standard
alpha/alpha/ieee_float.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/in_cksum.c optional inet
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/interrupt.c standard
Standardize handling of locore.[sS] etc. files. Submitted by: jake, bde, ru
2003-02-28 21:59:14 +00:00
alpha/alpha/locore.s standard no-obj
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/machdep.c standard
alpha/alpha/mem.c standard
alpha/alpha/pmap.c standard
Make mp_machdep.c be an optional file conditional on SMP.
2001-01-24 10:27:37 +00:00
alpha/alpha/mp_machdep.c optional smp
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/alpha/prom.c standard
alpha/alpha/promcons.c standard
alpha/alpha/prom_disp.s standard
alpha/alpha/sgmap.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/support.s standard
alpha/alpha/swtch.s standard
alpha/alpha/sys_machdep.c standard
alpha/alpha/trap.c standard
- Add uiomove_fromphys() implementations to alpha and ia64. These only differ trivially from amd64. - Correct a spelling error in a comment.
2004-03-20 21:06:20 +00:00
alpha/alpha/uio_machdep.c standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
alpha/alpha/vm_machdep.c standard
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
alpha/isa/isa.c optional isa
alpha/isa/isa_dma.c optional isa
alpha/isa/mcclock_isa.c optional isa
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/linux/linux_dummy.c optional compat_linux
alpha/linux/linux_locore.s optional compat_linux \
dependency "linux_assym.h"
alpha/linux/linux_machdep.c optional compat_linux
alpha/linux/linux_sysent.c optional compat_linux
alpha/linux/linux_sysvec.c optional compat_linux
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/mcbus/mcbus.c optional dec_kn300
alpha/mcbus/mcmem.c optional dec_kn300
alpha/mcbus/mcpcia.c optional dec_kn300
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/imgact_osf1.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/imgact_osf1.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_ioctl.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_ioctl.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_misc.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_misc.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_mount.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_mount.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_signal.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_signal.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_sysent.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_sysent.c optional compat_osf1
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
alpha/osf1/osf1_sysvec.c optional compat_linux
introduce support for static compilation of the osf/1 module via the COMPAT_OSF1 option
2000-12-02 04:17:19 +00:00
alpha/osf1/osf1_sysvec.c optional compat_osf1
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
alpha/pci/alphapci_if.m optional pci
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/apecs.c optional dec_2100_a50
alpha/pci/apecs.c optional dec_eb64plus
A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian Angelini for allowing me to use his AS1000 to do the port. Note that this is untested on AlphaServer 1000A hardware. Reviewed by: dfr Tested by: Cristian Angelini <chr.ang@biella.alpcom.it> Obtained From: NetBSD
1999-12-01 15:25:04 +00:00
alpha/pci/apecs.c optional dec_1000a
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/apecs_pci.c optional dec_2100_a50
alpha/pci/apecs_pci.c optional dec_eb64plus
A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian Angelini for allowing me to use his AS1000 to do the port. Note that this is untested on AlphaServer 1000A hardware. Reviewed by: dfr Tested by: Cristian Angelini <chr.ang@biella.alpcom.it> Obtained From: NetBSD
1999-12-01 15:25:04 +00:00
alpha/pci/apecs_pci.c optional dec_1000a
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
alpha/pci/bwx.c optional pci
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/cia.c optional dec_eb164
alpha/pci/cia.c optional dec_kn20aa
alpha/pci/cia.c optional dec_st550
A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian Angelini for allowing me to use his AS1000 to do the port. Note that this is untested on AlphaServer 1000A hardware. Reviewed by: dfr Tested by: Cristian Angelini <chr.ang@biella.alpcom.it> Obtained From: NetBSD
1999-12-01 15:25:04 +00:00
alpha/pci/cia.c optional dec_1000a
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/cia_pci.c optional dec_eb164
alpha/pci/cia_pci.c optional dec_kn20aa
alpha/pci/cia_pci.c optional dec_st550
A port of NetBSD's AlphaServer 1000 and 1000A support. Thanks to Cristian Angelini for allowing me to use his AS1000 to do the port. Note that this is untested on AlphaServer 1000A hardware. Reviewed by: dfr Tested by: Cristian Angelini <chr.ang@biella.alpcom.it> Obtained From: NetBSD
1999-12-01 15:25:04 +00:00
alpha/pci/cia_pci.c optional dec_1000a
Add support for the Alpha Processor, Inc. UP1000 system. Reviewed by: dfr Thanks to: Alpha Processor Inc. for supplying the hardware.
2000-06-19 21:15:45 +00:00
alpha/pci/irongate.c optional api_up1000
alpha/pci/irongate_pci.c optional api_up1000
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/lca.c optional dec_axppci_33
alpha/pci/lca_pci.c optional dec_axppci_33
alpha/pci/pci_eb164_intr.s optional dec_eb164
alpha/pci/pci_eb164_intr.s optional dec_kn20aa
alpha/pci/pci_eb164_intr.s optional dec_st550
alpha/pci/pci_eb64plus_intr.s optional dec_2100_a50
alpha/pci/pci_eb64plus_intr.s optional dec_eb64plus
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
alpha/pci/pcibus.c optional pci
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
alpha/pci/swiz.c optional pci
Add AlphaServer 2000 (demi-sable), 2100 (sable), and 2100A (lynx) support. Only PCI and on-board ISA peripherials are supported at this time. This support has been only lightly tested due to a lack of response to my call for testers on the freebsd-alpha mailing list. It works quite well on the one AS2100 on which it has been tested, but it may not work on an AS2100A and should therefore be regarded as experimental.
2000-05-28 02:52:54 +00:00
alpha/pci/t2.c optional dec_2100_a500
alpha/pci/t2_pci.c optional dec_2100_a500
Pull in the core bus drivers based on the machine type rather than requiring the user to figure it out. So, if you comment out all but the machine type you are using, you automatically get the bus code just for your system. (eg DEC_EB164 implies cia, etc). Multiple machine types still pulls in the appropriate busses. This means, take things like 'controller cia0' out of your config. Reviewed by: dfr (in principle)
1999-09-13 17:52:06 +00:00
alpha/pci/tsunami.c optional dec_st6600
alpha/pci/tsunami_pci.c optional dec_st6600
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
alpha/tlsb/dwlpx.c optional dec_kn8ae
alpha/tlsb/gbus.c optional dec_kn8ae
alpha/tlsb/kftxx.c optional dec_kn8ae
alpha/tlsb/mcclock_tlsb.c optional dec_kn8ae
alpha/tlsb/tlsb.c optional dec_kn8ae
alpha/tlsb/tlsbcpu.c optional dec_kn8ae
alpha/tlsb/tlsbmem.c optional dec_kn8ae
alpha/tlsb/zs_tlsb.c optional dec_kn8ae
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
compat/linux/linux_file.c optional compat_linux
Fix linux_getcwd() so that if the cwd isn't cached (__getcwd() fails), the cwd is looked up inside the kernel. The native getcwd() in libc handles this in userland if __getcwd() fails. Obtained from: NetBSD via OpenBSD Tested by: Chris Casey <chriss@phys.ksu.edu>, Markus Holmberg <markush@acc.umu.se> Reviewed by: Darrell Anderson <anderson@cs.duke.edu> PR: kern/24315
2001-08-29 19:05:27 +00:00
compat/linux/linux_getcwd.c optional compat_linux
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
compat/linux/linux_ioctl.c optional compat_linux
compat/linux/linux_ipc.c optional compat_linux
compat/linux/linux_mib.c optional compat_linux
compat/linux/linux_misc.c optional compat_linux
compat/linux/linux_signal.c optional compat_linux
compat/linux/linux_socket.c optional compat_linux
Add linux_sysctl.c, and linux_uid16.c to the x86 platforms.
2001-09-08 22:35:28 +00:00
compat/linux/linux_sysctl.c optional compat_linux
Add support for COMPAT_LINUX and DEBUG_LINUX. Make the OSF1 files dependent on 'compat_linux' as well as the Linuxulator depends on the osfulator.
2000-12-05 09:10:50 +00:00
compat/linux/linux_stats.c optional compat_linux
compat/linux/linux_util.c optional compat_linux
- Speedup 3DES by using assembly code for i386. - Sync des/blowfish to more recent openssl. Obtained from: KAME/NetBSD MFC after: 2 weeks
2002-03-05 09:19:02 +00:00
crypto/blowfish/bf_enc.c optional ipsec ipsec_esp
crypto/des/des_enc.c optional ipsec ipsec_esp
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
crypto/blowfish/bf_enc.c optional crypto
crypto/des/des_enc.c optional crypto
Newbusify adv driver. Reviewed by: imp
2000-04-07 11:32:42 +00:00
dev/advansys/adv_isa.c optional adv isa
- Added PC-98 Cbus frontend. - Move dev/aic/aic_isa.c entry from conf/files to conf/files.MACHINE because PC-98 uses different file. Submitted by: nyan and IMAI Takeshi <take-i@ceres.dti.ne.jp>
2000-03-29 14:32:34 +00:00
dev/aic/aic_isa.c optional aic isa
Style fixes: o Put the backslash in a fixed column by preference, o Sort the list of files.
2000-08-22 05:01:08 +00:00
dev/dec/mcclock.c optional mcclock
dev/dec/mcclock_if.m optional mcclock
The `ed' NIC driver has been changed to work on Alpha now. So enable it on all platforms. Submitted by: Alexander Langer <alex@big.endian.de>
2000-09-30 18:23:32 +00:00
dev/ed/if_ed_isa.c optional ed isa
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/fb/fb.c optional fb
dev/fb/fb.c optional vga
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
dev/fb/splash.c optional splash
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/fb/vga.c optional vga
dev/kbd/atkbd.c optional atkbd
de-count atkbdc and sc. Folks, remove the '1' from 'device sc 1' and 'device atkbdc 1'.
2002-08-19 23:59:21 +00:00
dev/kbd/atkbdc.c optional atkbdc
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/kbd/kbd.c optional atkbd
dev/kbd/kbd.c optional kbd
- Pull in kbd.c when sc or vt is included in the kernel, even if no keyboard driver is defined in the kernel config file.
1999-12-13 13:01:00 +00:00
dev/kbd/kbd.c optional sc
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/kbd/kbd.c optional ukbd
fix disordering of filenames. Place the dev/ppc files in alphabetical order.
2003-08-04 02:39:14 +00:00
dev/ppc/ppc.c optional ppc
First commit after a repo copy of isa/sio* -> dev/sio: Move sio from isa/sio.c to dev/sio/sio.c. The next step is to break out the front end attachments, improve support for these parts on different busses, and maybe, if we're lucky, merging in pc98 support. It will also be MI and live in conf/files rather than files.*. Approved by: bde Tested with: i386, pc98
2001-10-22 02:48:38 +00:00
dev/sio/sio.c optional sio
Move sio_isa.c back to MD files files due to PC98 brain damage.
2002-07-24 12:35:52 +00:00
dev/sio/sio_isa.c optional sio isa
de-count atkbdc and sc. Folks, remove the '1' from 'device sc 1' and 'device atkbdc 1'.
2002-08-19 23:59:21 +00:00
dev/syscons/schistory.c optional sc
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/syscons/scmouse.c optional sc
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
dev/syscons/scterm.c optional sc
dev/syscons/scterm-dumb.c optional sc
dev/syscons/scterm-sc.c optional sc
Arrange for the following files to be compiled when the configuration conditions are met rather than having to resort to #if's in the code. > dev/syscons/scvgarndr.c optional sc vga > dev/syscons/scvesactl.c optional sc vga vesa > i386/isa/vesa.c optional vga vesa
2000-01-29 15:04:33 +00:00
dev/syscons/scvgarndr.c optional sc vga
Turn on TGA support. Submitted by: Andrew M. Miklic <AndrwMklc@cs.com>
2002-04-13 22:34:16 +00:00
dev/syscons/scgfbrndr.c optional sc tga
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
dev/syscons/scvidctl.c optional sc
dev/syscons/scvtb.c optional sc
dev/syscons/syscons.c optional sc
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
dev/syscons/sysmouse.c optional sc
Hook-up the uart(4) driver to the build. For a detailed description of what uart(4) is and/or is not see the initial commit log of one of the files in sys/dev/uart (or see share/man/man4/uart.4). Note that currently pc98 shares the MD file with i386. This needs to change when pc98 support is fleshed-out to properly support the various UARTs. A good example is sparc64 in this respect. We build uart(4) as a module on all platforms. This may break the ppc port. That depends on whether they do actually build modules. To use uart(4) on alpha, one must use the NO_SIO option.
2003-09-06 23:23:26 +00:00
dev/uart/uart_cpu_alpha.c optional uart
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
geom/geom_bsd.c standard
Separate the encoding/decoding functions for struct disklabel into a separate source file which can be used from both kernel and userland code.
2003-04-17 07:39:03 +00:00
geom/geom_bsd_enc.c standard
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
isa/atkbd_isa.c optional atkbd
isa/atkbdc_isa.c optional atkbdc
A checkpoint of a part of a work-in-progress. Some more cleanups for config(8). This commit allows control of the creation of the #include "foo.h" files. We now only create them explicitly when needed. BTW; these are mostly bad because they usually imply static limits on numbers of units for devices. eg: struct mysoftc sc[NFOO]; These static limits have Got To Go.
2000-06-10 22:13:40 +00:00
isa/fd.c optional fdc
Sort the easy part of this file. It should be all sorted.
1999-08-29 08:44:18 +00:00
isa/psm.c optional psm
isa/syscons_isa.c optional sc
isa/vga_isa.c optional vga
Add the following functions/macros to support byte order conversions and device drivers for bus system with other endinesses than the CPU (using interfaces compatible to NetBSD): - bwap16() and bswap32(). These have optimized implementations on some architectures; for those that don't, there exist generic implementations. - macros to convert from a certain byte order to host byte order and vice versa, using a naming scheme like le16toh(), htole16(). These are implemented using the bswap functions. - stream bus space access functions, which do not perform a byte order conversion (while the normal access functions would if the bus endianess differs from the CPU endianess). htons(), htonl(), ntohs() and ntohl() are implemented using the new functions above for kernel usage. None of the above interfaces is currently exported to user land. Make use of the new functions in a few places where local implementations of the same functionality existed. Reviewed by: mike, bde Tested on alpha by: mike
2002-02-27 17:16:18 +00:00
libkern/alpha/bswap16.S standard
libkern/alpha/bswap32.S standard
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
libkern/bcmp.c standard
libkern/ffs.c standard
Forgot ffsl() and flsl() on alpha.
2004-01-13 18:05:49 +00:00
libkern/ffsl.c standard
Add ffsl(), fls() flsl() to platforms that don't already have them.
2004-01-13 15:37:23 +00:00
libkern/fls.c standard
Forgot ffsl() and flsl() on alpha.
2004-01-13 18:05:49 +00:00
libkern/flsl.c standard
Turn on TGA support. Submitted by: Andrew M. Miklic <AndrwMklc@cs.com>
2002-04-13 22:34:16 +00:00
dev/fb/tga.c optional tga
dev/fb/boot_font.c optional tga
dev/tga/tga_pci.c optional tga
dev/fb/fb.c optional tga
dev/fb/gfb.c optional tga
dev/gfb/gfb_pci.c optional tga
Split the arch-specific AGP files into the appropriate files.* and do the same for the agp module, and add agp to the list of modules to compile for alpha. Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
pci/agp_amd.c optional agp
Reference in New Issue Copy Permalink