freebsd-nq/sys/dev/zs/zs_macio.c

295 lines
7.9 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2003 Jake Burkholder, Benno Rice.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <dev/zs/z8530reg.h>
#include <dev/zs/z8530var.h>
#define ZS_MACIO_CHAN_A 32
#define ZS_MACIO_CHAN_B 0
#define ZS_MACIO_CSR 0
#define ZS_MACIO_DATA 16
#define ZS_MACIO_DEF_SPEED (57600)
#define ZS_MACIO_CLOCK (9600 * 384)
#define ZS_MACIO_CLOCK_DIV (16)
struct zs_macio_softc {
struct zs_softc sc_zs;
struct resource *sc_irqres1, *sc_irqres2;
int sc_irqrid1, sc_irqrid2;
void *sc_ih1, *sc_ih2;
struct resource *sc_memres;
int sc_memrid;
};
static int zs_macio_attach(device_t dev);
static int zs_macio_detach(device_t dev);
static int zs_macio_probe(device_t dev);
static int zstty_macio_attach(device_t dev);
static int zstty_macio_probe(device_t dev);
static device_method_t zs_macio_methods[] = {
DEVMETHOD(device_probe, zs_macio_probe),
DEVMETHOD(device_attach, zs_macio_attach),
DEVMETHOD(device_detach, zs_macio_detach),
DEVMETHOD(bus_print_child, bus_generic_print_child),
{ 0, 0 }
};
static device_method_t zstty_macio_methods[] = {
DEVMETHOD(device_probe, zstty_macio_probe),
DEVMETHOD(device_attach, zstty_macio_attach),
DEVMETHOD(device_detach, bus_generic_detach),
{ 0, 0}
};
static driver_t zs_macio_driver = {
"zs",
zs_macio_methods,
sizeof(struct zs_macio_softc),
};
static driver_t zstty_macio_driver = {
"zstty",
zstty_macio_methods,
sizeof(struct zstty_softc),
};
static devclass_t zs_macio_devclass;
static devclass_t zstty_macio_devclass;
DRIVER_MODULE(zstty, zs, zstty_macio_driver, zstty_macio_devclass, 0, 0);
DRIVER_MODULE(zs, macio, zs_macio_driver, zs_macio_devclass, 0, 0);
static u_char zs_macio_init_reg[16] = {
0, /* 0: CMD (reset, etc.) */
0, /* 1: No interrupts yet. */
0, /* IVECT */
ZSWR3_RX_8 | ZSWR3_RX_ENABLE,
ZSWR4_CLK_X16 | ZSWR4_ONESB,
ZSWR5_TX_8 | ZSWR5_TX_ENABLE,
0, /* 6: TXSYNC/SYNCLO */
0, /* 7: RXSYNC/SYNCHI */
0, /* 8: alias for data port */
ZSWR9_MASTER_IE | ZSWR9_NO_VECTOR,
0, /*10: Misc. TX/RX control bits */
ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD,
#if 0
((ZS_MACIO_CLOCK/32)/ZS_MACIO_DEF_SPEED)-2,
#endif
BPS_TO_TCONST((ZS_MACIO_CLOCK / ZS_MACIO_CLOCK_DIV), ZS_MACIO_DEF_SPEED),
0,
ZSWR14_BAUD_ENA,
ZSWR15_BREAK_IE,
};
static int
zs_macio_probe(device_t dev)
{
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
if (strcmp(ofw_bus_get_name(dev), "escc") != 0 ||
device_get_unit(dev) != 0)
return (ENXIO);
return (zs_probe(dev));
}
static int
zs_macio_attach(device_t dev)
{
struct zs_macio_softc *sc;
sc = device_get_softc(dev);
sc->sc_memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->sc_memrid, RF_ACTIVE);
if (sc->sc_memres == NULL) {
device_printf(dev, "could not allocate memory\n");
goto error;
}
sc->sc_irqrid1 = 0;
sc->sc_irqres1 = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->sc_irqrid1, RF_ACTIVE);
if (sc->sc_irqres1 == NULL) {
device_printf(dev, "could not allocate interrupt 1\n");
goto error;
}
if (bus_setup_intr(dev, sc->sc_irqres1, INTR_TYPE_TTY,
zs_intr, NULL, sc, &sc->sc_ih1) != 0) {
device_printf(dev, "could not setup interrupt 1\n");
goto error;
}
sc->sc_irqrid2 = 1;
sc->sc_irqres2 = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->sc_irqrid2, RF_ACTIVE);
if (sc->sc_irqres2 == NULL) {
device_printf(dev, "could not allocate interrupt 2\n");
goto error;
}
if (bus_setup_intr(dev, sc->sc_irqres2, INTR_TYPE_TTY,
zs_intr, NULL, sc, &sc->sc_ih2) != 0) {
device_printf(dev, "could not setup interrupt 2\n");
goto error;
}
sc->sc_zs.sc_bt = rman_get_bustag(sc->sc_memres);
sc->sc_zs.sc_bh = rman_get_bushandle(sc->sc_memres);
return (zs_attach(dev));
error:
zs_macio_detach(dev);
return (ENXIO);
}
static int
zs_macio_detach(device_t dev)
{
struct zs_macio_softc *sc;
sc = device_get_softc(dev);
if (sc->sc_irqres2 != NULL) {
if (sc->sc_ih2 != NULL)
bus_teardown_intr(dev, sc->sc_irqres2, sc->sc_ih2);
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid2,
sc->sc_irqres2);
}
if (sc->sc_irqres1 != NULL) {
if (sc->sc_ih1 != NULL)
bus_teardown_intr(dev, sc->sc_irqres1, sc->sc_ih1);
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid1,
sc->sc_irqres1);
}
if (sc->sc_memres != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid,
sc->sc_memres);
return (0);
}
static int
zstty_macio_probe(device_t dev)
{
if ((device_get_unit(dev) & 1) == 0)
device_set_desc(dev, "ttya");
else
device_set_desc(dev, "ttyb");
return (zstty_probe(dev));
}
static int
zstty_macio_attach(device_t dev)
{
struct zstty_softc *sc;
sc = device_get_softc(dev);
sc->sc_parent = device_get_softc(device_get_parent(dev));
sc->sc_bt = sc->sc_parent->sc_bt;
sc->sc_brg_clk = ZS_MACIO_CLOCK / ZS_MACIO_CLOCK_DIV;
switch (device_get_unit(dev) & 1) {
case 0:
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_MACIO_CHAN_A + ZS_MACIO_CSR, 1, &sc->sc_csr);
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_MACIO_CHAN_A + ZS_MACIO_DATA, 1, &sc->sc_data);
break;
case 1:
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_MACIO_CHAN_B + ZS_MACIO_CSR, 1, &sc->sc_csr);
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_MACIO_CHAN_B + ZS_MACIO_DATA, 1, &sc->sc_data);
break;
}
bcopy(zs_macio_init_reg, sc->sc_creg, 16);
bcopy(zs_macio_init_reg, sc->sc_preg, 16);
return (zstty_attach(dev));
}
void
zstty_set_speed(struct zstty_softc *sc, int ospeed)
{
sc->sc_preg[12] = ospeed;
sc->sc_preg[13] = ospeed >> 8;
}
int
zstty_console(device_t dev, char *mode, int len)
{
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
phandle_t chosen, options, parent;
ihandle_t stdin, stdout;
phandle_t stdinp, stdoutp;
char input[32], output[32];
const char *desc;
chosen = OF_finddevice("/chosen");
options = OF_finddevice("/options");
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
parent = ofw_bus_get_node(device_get_parent(dev));
if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1 ||
OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1 ||
OF_getprop(options, "input-device", input, sizeof(input)) == -1 ||
OF_getprop(options, "output-device", output,
sizeof(output)) == -1) {
return (0);
}
stdinp = OF_parent(OF_instance_to_package(stdin));
stdoutp = OF_parent(OF_instance_to_package(stdout));
desc = device_get_desc(dev);
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
if (parent == stdinp && parent == stdoutp &&
input[3] == desc[3] && output[3] == desc[3]) {
if (mode != NULL)
strlcpy(mode, "57600,8,n,1,-", len);
return (1);
}
return (0);
}