freebsd-nq/sys/compat/ndis/subr_pe.c

639 lines
16 KiB
C
Raw Normal View History

/*-
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
* Copyright (c) 2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* This file contains routines for relocating and dynamically linking
* executable object code files in the Windows(r) PE (Portable Executable)
* format. In Windows, anything with a .EXE, .DLL or .SYS extention is
* considered an executable, and all such files have some structures in
* common. The PE format was apparently based largely on COFF but has
* mutated significantly over time. We are mainly concerned with .SYS files,
* so this module implements only enough routines to be able to parse the
* headers and sections of a .SYS object file and perform the necessary
* relocations and jump table patching to allow us to call into it
* (and to have it call back to us). Note that while this module
* can handle fixups for imported symbols, it knows nothing about
* exporting them.
*/
#include <sys/param.h>
#include <sys/types.h>
#include <sys/errno.h>
#ifdef _KERNEL
#include <sys/systm.h>
extern int ndis_strncasecmp(const char *, const char *, size_t);
#define strncasecmp(a, b, c) ndis_strncasecmp(a, b, c)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#else
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#endif
#include <compat/ndis/pe_var.h>
static vm_offset_t pe_functbl_match(image_patch_table *, char *);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
* Check for an MS-DOS executable header. All Windows binaries
* have a small MS-DOS executable prepended to them to print out
* the "This program requires Windows" message. Even .SYS files
* have this header, in spite of the fact that you're can't actually
* run them directly.
*/
int
pe_get_dos_header(imgbase, hdr)
vm_offset_t imgbase;
image_dos_header *hdr;
{
uint16_t signature;
if (imgbase == 0 || hdr == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return (EINVAL);
signature = *(uint16_t *)imgbase;
if (signature != IMAGE_DOS_SIGNATURE)
return (ENOEXEC);
bcopy ((char *)imgbase, (char *)hdr, sizeof(image_dos_header));
return(0);
}
/*
* Verify that this image has a Windows NT PE signature.
*/
int
pe_is_nt_image(imgbase)
vm_offset_t imgbase;
{
uint32_t signature;
image_dos_header *dos_hdr;
if (imgbase == 0)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return (EINVAL);
signature = *(uint16_t *)imgbase;
if (signature == IMAGE_DOS_SIGNATURE) {
dos_hdr = (image_dos_header *)imgbase;
signature = *(uint32_t *)(imgbase + dos_hdr->idh_lfanew);
if (signature == IMAGE_NT_SIGNATURE)
return(0);
}
return(ENOEXEC);
}
/*
* Return a copy of the optional header. This contains the
* executable entry point and the directory listing which we
* need to find the relocations and imports later.
*/
int
pe_get_optional_header(imgbase, hdr)
vm_offset_t imgbase;
image_optional_header *hdr;
{
image_dos_header *dos_hdr;
image_nt_header *nt_hdr;
if (imgbase == 0 || hdr == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
if (pe_is_nt_image(imgbase))
return (EINVAL);
dos_hdr = (image_dos_header *)(imgbase);
nt_hdr = (image_nt_header *)(imgbase + dos_hdr->idh_lfanew);
bcopy ((char *)&nt_hdr->inh_optionalhdr, (char *)hdr,
sizeof(image_optional_header));
return(0);
}
/*
* Return a copy of the file header. Contains the number of
* sections in this image.
*/
int
pe_get_file_header(imgbase, hdr)
vm_offset_t imgbase;
image_file_header *hdr;
{
image_dos_header *dos_hdr;
image_nt_header *nt_hdr;
if (imgbase == 0 || hdr == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
if (pe_is_nt_image(imgbase))
return (EINVAL);
dos_hdr = (image_dos_header *)imgbase;
nt_hdr = (image_nt_header *)(imgbase + dos_hdr->idh_lfanew);
bcopy ((char *)&nt_hdr->inh_filehdr, (char *)hdr,
sizeof(image_file_header));
return(0);
}
/*
* Return the header of the first section in this image (usually
* .text).
*/
int
pe_get_section_header(imgbase, hdr)
vm_offset_t imgbase;
image_section_header *hdr;
{
image_dos_header *dos_hdr;
image_nt_header *nt_hdr;
image_section_header *sect_hdr;
if (imgbase == 0 || hdr == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
if (pe_is_nt_image(imgbase))
return (EINVAL);
dos_hdr = (image_dos_header *)imgbase;
nt_hdr = (image_nt_header *)(imgbase + dos_hdr->idh_lfanew);
sect_hdr = (image_section_header *)((vm_offset_t)nt_hdr +
sizeof(image_nt_header));
bcopy ((char *)sect_hdr, (char *)hdr, sizeof(image_section_header));
return(0);
}
/*
* Return the number of sections in this executable, or 0 on error.
*/
int
pe_numsections(imgbase)
vm_offset_t imgbase;
{
image_file_header file_hdr;
if (pe_get_file_header(imgbase, &file_hdr))
return(0);
return (file_hdr.ifh_numsections);
}
/*
* Return the base address that this image was linked for.
* This helps us calculate relocation addresses later.
*/
vm_offset_t
pe_imagebase(imgbase)
vm_offset_t imgbase;
{
image_optional_header optional_hdr;
if (pe_get_optional_header(imgbase, &optional_hdr))
return(0);
return (optional_hdr.ioh_imagebase);
}
/*
* Return the offset of a given directory structure within the
* image. Directories reside within sections.
*/
vm_offset_t
pe_directory_offset(imgbase, diridx)
vm_offset_t imgbase;
uint32_t diridx;
{
image_optional_header opt_hdr;
vm_offset_t dir;
if (pe_get_optional_header(imgbase, &opt_hdr))
return(0);
if (diridx >= opt_hdr.ioh_rva_size_cnt)
return(0);
dir = opt_hdr.ioh_datadir[diridx].idd_vaddr;
return(pe_translate_addr(imgbase, dir));
}
vm_offset_t
pe_translate_addr(imgbase, rva)
vm_offset_t imgbase;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
vm_offset_t rva;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
{
image_optional_header opt_hdr;
image_section_header *sect_hdr;
image_dos_header *dos_hdr;
image_nt_header *nt_hdr;
int i = 0, sections, fixedlen;
if (pe_get_optional_header(imgbase, &opt_hdr))
return(0);
sections = pe_numsections(imgbase);
dos_hdr = (image_dos_header *)imgbase;
nt_hdr = (image_nt_header *)(imgbase + dos_hdr->idh_lfanew);
sect_hdr = (image_section_header *)((vm_offset_t)nt_hdr +
sizeof(image_nt_header));
/*
* The test here is to see if the RVA falls somewhere
* inside the section, based on the section's start RVA
* and its length. However it seems sometimes the
* virtual length isn't enough to cover the entire
* area of the section. We fudge by taking into account
* the section alignment and rounding the section length
* up to a page boundary.
*/
while (i++ < sections) {
fixedlen = sect_hdr->ish_misc.ish_vsize;
fixedlen += ((opt_hdr.ioh_sectalign - 1) -
sect_hdr->ish_misc.ish_vsize) &
(opt_hdr.ioh_sectalign - 1);
if (sect_hdr->ish_vaddr <= (uint32_t)rva &&
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
(sect_hdr->ish_vaddr + fixedlen) >
(uint32_t)rva)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
break;
sect_hdr++;
}
if (i > sections)
return(0);
return((vm_offset_t)(imgbase + rva - sect_hdr->ish_vaddr +
sect_hdr->ish_rawdataaddr));
}
/*
* Get the section header for a particular section. Note that
* section names can be anything, but there are some standard
* ones (.text, .data, .rdata, .reloc).
*/
int
pe_get_section(imgbase, hdr, name)
vm_offset_t imgbase;
image_section_header *hdr;
const char *name;
{
image_dos_header *dos_hdr;
image_nt_header *nt_hdr;
image_section_header *sect_hdr;
int i, sections;
if (imgbase == 0 || hdr == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
if (pe_is_nt_image(imgbase))
return (EINVAL);
sections = pe_numsections(imgbase);
dos_hdr = (image_dos_header *)imgbase;
nt_hdr = (image_nt_header *)(imgbase + dos_hdr->idh_lfanew);
sect_hdr = (image_section_header *)((vm_offset_t)nt_hdr +
sizeof(image_nt_header));
for (i = 0; i < sections; i++) {
if (!strcmp ((char *)&sect_hdr->ish_name, name)) {
bcopy((char *)sect_hdr, (char *)hdr,
sizeof(image_section_header));
return(0);
} else
sect_hdr++;
}
return (ENOEXEC);
}
/*
* Apply the base relocations to this image. The relocation table
* resides within the .reloc section. Relocations are specified in
* blocks which refer to a particular page. We apply the relocations
* one page block at a time.
*/
int
pe_relocate(imgbase)
vm_offset_t imgbase;
{
image_section_header sect;
image_base_reloc *relhdr;
uint16_t rel, *sloc;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
vm_offset_t base;
vm_size_t delta;
uint32_t *lloc;
uint64_t *qloc;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
int i, count;
vm_offset_t txt;
base = pe_imagebase(imgbase);
pe_get_section(imgbase, &sect, ".text");
txt = pe_translate_addr(imgbase, sect.ish_vaddr);
delta = (uint32_t)(txt) - base - sect.ish_vaddr;
pe_get_section(imgbase, &sect, ".reloc");
relhdr = (image_base_reloc *)(imgbase + sect.ish_rawdataaddr);
do {
count = (relhdr->ibr_blocksize -
(sizeof(uint32_t) * 2)) / sizeof(uint16_t);
for (i = 0; i < count; i++) {
rel = relhdr->ibr_rel[i];
switch (IMR_RELTYPE(rel)) {
case IMAGE_REL_BASED_ABSOLUTE:
break;
case IMAGE_REL_BASED_HIGHLOW:
lloc = (uint32_t *)pe_translate_addr(imgbase,
relhdr->ibr_vaddr + IMR_RELOFFSET(rel));
*lloc = pe_translate_addr(imgbase,
(*lloc - base));
break;
case IMAGE_REL_BASED_HIGH:
sloc = (uint16_t *)pe_translate_addr(imgbase,
relhdr->ibr_vaddr + IMR_RELOFFSET(rel));
*sloc += (delta & 0xFFFF0000) >> 16;
break;
case IMAGE_REL_BASED_LOW:
sloc = (uint16_t *)pe_translate_addr(imgbase,
relhdr->ibr_vaddr + IMR_RELOFFSET(rel));
*sloc += (delta & 0xFFFF);
break;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
case IMAGE_REL_BASED_DIR64:
qloc = (uint64_t *)pe_translate_addr(imgbase,
relhdr->ibr_vaddr + IMR_RELOFFSET(rel));
*qloc = pe_translate_addr(imgbase,
(*qloc - base));
break;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
default:
printf ("[%d]reloc type: %d\n",i,
IMR_RELTYPE(rel));
break;
}
}
relhdr = (image_base_reloc *)((vm_offset_t)relhdr +
relhdr->ibr_blocksize);
} while (relhdr->ibr_blocksize);
return(0);
}
/*
* Return the import descriptor for a particular module. An image
* may be linked against several modules, typically HAL.dll, ntoskrnl.exe
* and NDIS.SYS. For each module, there is a list of imported function
* names and their addresses.
*
* Note: module names are case insensitive!
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
*/
int
pe_get_import_descriptor(imgbase, desc, module)
vm_offset_t imgbase;
image_import_descriptor *desc;
char *module;
{
vm_offset_t offset;
image_import_descriptor *imp_desc;
char *modname;
if (imgbase == 0 || module == NULL || desc == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
offset = pe_directory_offset(imgbase, IMAGE_DIRECTORY_ENTRY_IMPORT);
if (offset == 0)
return (ENOENT);
imp_desc = (void *)offset;
while (imp_desc->iid_nameaddr) {
modname = (char *)pe_translate_addr(imgbase,
imp_desc->iid_nameaddr);
if (!strncasecmp(module, modname, strlen(module))) {
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
bcopy((char *)imp_desc, (char *)desc,
sizeof(image_import_descriptor));
return(0);
}
imp_desc++;
}
return (ENOENT);
}
int
pe_get_messagetable(imgbase, md)
vm_offset_t imgbase;
message_resource_data **md;
{
image_resource_directory *rdir, *rtype;
image_resource_directory_entry *dent, *dent2;
image_resource_data_entry *rent;
vm_offset_t offset;
int i;
if (imgbase == 0)
return(EINVAL);
offset = pe_directory_offset(imgbase, IMAGE_DIRECTORY_ENTRY_RESOURCE);
if (offset == 0)
return (ENOENT);
rdir = (image_resource_directory *)offset;
dent = (image_resource_directory_entry *)(offset +
sizeof(image_resource_directory));
for (i = 0; i < rdir->ird_id_entries; i++){
if (dent->irde_name != RT_MESSAGETABLE) {
dent++;
continue;
}
dent2 = dent;
while (dent2->irde_dataoff & RESOURCE_DIR_FLAG) {
rtype = (image_resource_directory *)(offset +
(dent2->irde_dataoff & ~RESOURCE_DIR_FLAG));
dent2 = (image_resource_directory_entry *)
((uintptr_t)rtype +
sizeof(image_resource_directory));
}
rent = (image_resource_data_entry *)(offset +
dent2->irde_dataoff);
*md = (message_resource_data *)pe_translate_addr(imgbase,
rent->irde_offset);
return(0);
}
return(ENOENT);
}
int
pe_get_message(imgbase, id, str, len, flags)
vm_offset_t imgbase;
uint32_t id;
char **str;
int *len;
uint16_t *flags;
{
message_resource_data *md = NULL;
message_resource_block *mb;
message_resource_entry *me;
uint32_t i;
pe_get_messagetable(imgbase, &md);
if (md == NULL)
return(ENOENT);
mb = (message_resource_block *)((uintptr_t)md +
sizeof(message_resource_data));
for (i = 0; i < md->mrd_numblocks; i++) {
if (id >= mb->mrb_lowid && id <= mb->mrb_highid) {
me = (message_resource_entry *)((uintptr_t)md +
mb->mrb_entryoff);
for (i = id - mb->mrb_lowid; i > 0; i--)
me = (message_resource_entry *)((uintptr_t)me +
me->mre_len);
*str = me->mre_text;
*len = me->mre_len;
*flags = me->mre_flags;
return(0);
}
mb++;
}
return(ENOENT);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
* Find the function that matches a particular name. This doesn't
* need to be particularly speedy since it's only run when loading
* a module for the first time.
*/
static vm_offset_t
pe_functbl_match(functbl, name)
image_patch_table *functbl;
char *name;
{
image_patch_table *p;
if (functbl == NULL || name == NULL)
return(0);
p = functbl;
while (p->ipt_name != NULL) {
if (!strcmp(p->ipt_name, name))
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
return((vm_offset_t)p->ipt_wrap);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
p++;
}
printf ("no match for %s\n", name);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
/*
* Return the wrapper pointer for this routine.
* For x86, this is the same as the funcptr.
* For amd64, this points to a wrapper routine
* that does calling convention translation and
* then invokes the underlying routine.
*/
return((vm_offset_t)p->ipt_wrap);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
/*
* Patch the imported function addresses for a given module.
* The caller must specify the module name and provide a table
* of function pointers that will be patched into the jump table.
* Note that there are actually two copies of the jump table: one
* copy is left alone. In a .SYS file, the jump tables are usually
* merged into the INIT segment.
*/
int
pe_patch_imports(imgbase, module, functbl)
vm_offset_t imgbase;
char *module;
image_patch_table *functbl;
{
image_import_descriptor imp_desc;
char *fname;
vm_offset_t *nptr, *fptr;
vm_offset_t func;
if (imgbase == 0 || module == NULL || functbl == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
if (pe_get_import_descriptor(imgbase, &imp_desc, module))
return(ENOEXEC);
nptr = (vm_offset_t *)pe_translate_addr(imgbase,
imp_desc.iid_import_name_table_addr);
fptr = (vm_offset_t *)pe_translate_addr(imgbase,
imp_desc.iid_import_address_table_addr);
while (nptr != NULL && pe_translate_addr(imgbase, *nptr)) {
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
fname = (char *)pe_translate_addr(imgbase, (*nptr) + 2);
func = pe_functbl_match(functbl, fname);
if (func)
*fptr = func;
#ifdef notdef
if (*fptr == 0)
return(ENOENT);
#endif
nptr++;
fptr++;
}
return(0);
}