freebsd-nq/module/zfs/dmu_send.c

2275 lines
61 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011 by Delphix. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2014, Joyent, Inc. All rights reserved.
* Copyright (c) 2011, 2014 by Delphix. All rights reserved.
*/
2008-11-20 20:01:55 +00:00
#include <sys/dmu.h>
#include <sys/dmu_impl.h>
#include <sys/dmu_tx.h>
#include <sys/dbuf.h>
#include <sys/dnode.h>
#include <sys/zfs_context.h>
#include <sys/dmu_objset.h>
#include <sys/dmu_traverse.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_prop.h>
2008-11-20 20:01:55 +00:00
#include <sys/dsl_pool.h>
#include <sys/dsl_synctask.h>
#include <sys/spa_impl.h>
2008-11-20 20:01:55 +00:00
#include <sys/zfs_ioctl.h>
#include <sys/zap.h>
#include <sys/zio_checksum.h>
#include <sys/zfs_znode.h>
#include <zfs_fletcher.h>
#include <sys/avl.h>
#include <sys/ddt.h>
#include <sys/zfs_onexit.h>
#include <sys/dmu_send.h>
#include <sys/dsl_destroy.h>
#include <sys/blkptr.h>
#include <sys/dsl_bookmark.h>
#include <sys/zfeature.h>
2008-11-20 20:01:55 +00:00
/* Set this tunable to TRUE to replace corrupt data with 0x2f5baddb10c */
int zfs_send_corrupt_data = B_FALSE;
2008-11-20 20:01:55 +00:00
static char *dmu_recv_tag = "dmu_recv_tag";
static const char *recv_clone_name = "%recv";
2008-11-20 20:01:55 +00:00
typedef struct dump_bytes_io {
dmu_sendarg_t *dbi_dsp;
void *dbi_buf;
int dbi_len;
} dump_bytes_io_t;
static void
dump_bytes_strategy(void *arg)
2008-11-20 20:01:55 +00:00
{
dump_bytes_io_t *dbi = (dump_bytes_io_t *)arg;
dmu_sendarg_t *dsp = dbi->dbi_dsp;
dsl_dataset_t *ds = dsp->dsa_os->os_dsl_dataset;
2008-11-20 20:01:55 +00:00
ssize_t resid; /* have to get resid to get detailed errno */
ASSERT0(dbi->dbi_len % 8);
2008-11-20 20:01:55 +00:00
fletcher_4_incremental_native(dbi->dbi_buf, dbi->dbi_len, &dsp->dsa_zc);
dsp->dsa_err = vn_rdwr(UIO_WRITE, dsp->dsa_vp,
(caddr_t)dbi->dbi_buf, dbi->dbi_len,
2008-11-20 20:01:55 +00:00
0, UIO_SYSSPACE, FAPPEND, RLIM64_INFINITY, CRED(), &resid);
mutex_enter(&ds->ds_sendstream_lock);
*dsp->dsa_off += dbi->dbi_len;
mutex_exit(&ds->ds_sendstream_lock);
}
static int
dump_bytes(dmu_sendarg_t *dsp, void *buf, int len)
{
dump_bytes_io_t dbi;
dbi.dbi_dsp = dsp;
dbi.dbi_buf = buf;
dbi.dbi_len = len;
/*
* The vn_rdwr() call is performed in a taskq to ensure that there is
* always enough stack space to write safely to the target filesystem.
* The ZIO_TYPE_FREE threads are used because there can be a lot of
* them and they are used in vdev_file.c for a similar purpose.
*/
spa_taskq_dispatch_sync(dmu_objset_spa(dsp->dsa_os), ZIO_TYPE_FREE,
ZIO_TASKQ_ISSUE, dump_bytes_strategy, &dbi, TQ_SLEEP);
return (dsp->dsa_err);
2008-11-20 20:01:55 +00:00
}
static int
dump_free(dmu_sendarg_t *dsp, uint64_t object, uint64_t offset,
2008-11-20 20:01:55 +00:00
uint64_t length)
{
struct drr_free *drrf = &(dsp->dsa_drr->drr_u.drr_free);
/*
* When we receive a free record, dbuf_free_range() assumes
* that the receiving system doesn't have any dbufs in the range
* being freed. This is always true because there is a one-record
* constraint: we only send one WRITE record for any given
* object+offset. We know that the one-record constraint is
* true because we always send data in increasing order by
* object,offset.
*
* If the increasing-order constraint ever changes, we should find
* another way to assert that the one-record constraint is still
* satisfied.
*/
ASSERT(object > dsp->dsa_last_data_object ||
(object == dsp->dsa_last_data_object &&
offset > dsp->dsa_last_data_offset));
/*
* If we are doing a non-incremental send, then there can't
* be any data in the dataset we're receiving into. Therefore
* a free record would simply be a no-op. Save space by not
* sending it to begin with.
*/
if (!dsp->dsa_incremental)
return (0);
if (length != -1ULL && offset + length < offset)
length = -1ULL;
/*
* If there is a pending op, but it's not PENDING_FREE, push it out,
* since free block aggregation can only be done for blocks of the
* same type (i.e., DRR_FREE records can only be aggregated with
* other DRR_FREE records. DRR_FREEOBJECTS records can only be
* aggregated with other DRR_FREEOBJECTS records.
*/
if (dsp->dsa_pending_op != PENDING_NONE &&
dsp->dsa_pending_op != PENDING_FREE) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
if (dsp->dsa_pending_op == PENDING_FREE) {
/*
* There should never be a PENDING_FREE if length is -1
* (because dump_dnode is the only place where this
* function is called with a -1, and only after flushing
* any pending record).
*/
ASSERT(length != -1ULL);
/*
* Check to see whether this free block can be aggregated
* with pending one.
*/
if (drrf->drr_object == object && drrf->drr_offset +
drrf->drr_length == offset) {
drrf->drr_length += length;
return (0);
} else {
/* not a continuation. Push out pending record */
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
}
/* create a FREE record and make it pending */
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_FREE;
drrf->drr_object = object;
drrf->drr_offset = offset;
drrf->drr_length = length;
drrf->drr_toguid = dsp->dsa_toguid;
if (length == -1ULL) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
} else {
dsp->dsa_pending_op = PENDING_FREE;
}
2008-11-20 20:01:55 +00:00
return (0);
}
static int
dump_write(dmu_sendarg_t *dsp, dmu_object_type_t type,
uint64_t object, uint64_t offset, int blksz, const blkptr_t *bp, void *data)
2008-11-20 20:01:55 +00:00
{
struct drr_write *drrw = &(dsp->dsa_drr->drr_u.drr_write);
/*
* We send data in increasing object, offset order.
* See comment in dump_free() for details.
*/
ASSERT(object > dsp->dsa_last_data_object ||
(object == dsp->dsa_last_data_object &&
offset > dsp->dsa_last_data_offset));
dsp->dsa_last_data_object = object;
dsp->dsa_last_data_offset = offset + blksz - 1;
/*
* If there is any kind of pending aggregation (currently either
* a grouping of free objects or free blocks), push it out to
* the stream, since aggregation can't be done across operations
* of different types.
*/
if (dsp->dsa_pending_op != PENDING_NONE) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
2008-11-20 20:01:55 +00:00
/* write a DATA record */
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_WRITE;
drrw->drr_object = object;
drrw->drr_type = type;
drrw->drr_offset = offset;
drrw->drr_length = blksz;
drrw->drr_toguid = dsp->dsa_toguid;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if (bp == NULL || BP_IS_EMBEDDED(bp)) {
/*
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
* There's no pre-computed checksum for partial-block
* writes or embedded BP's, so (like
* fletcher4-checkummed blocks) userland will have to
* compute a dedup-capable checksum itself.
*/
drrw->drr_checksumtype = ZIO_CHECKSUM_OFF;
} else {
drrw->drr_checksumtype = BP_GET_CHECKSUM(bp);
if (zio_checksum_table[drrw->drr_checksumtype].ci_dedup)
drrw->drr_checksumflags |= DRR_CHECKSUM_DEDUP;
DDK_SET_LSIZE(&drrw->drr_key, BP_GET_LSIZE(bp));
DDK_SET_PSIZE(&drrw->drr_key, BP_GET_PSIZE(bp));
DDK_SET_COMPRESS(&drrw->drr_key, BP_GET_COMPRESS(bp));
drrw->drr_key.ddk_cksum = bp->blk_cksum;
}
if (dump_bytes(dsp, dsp->dsa_drr, sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
if (dump_bytes(dsp, data, blksz) != 0)
return (SET_ERROR(EINTR));
return (0);
}
static int
dump_write_embedded(dmu_sendarg_t *dsp, uint64_t object, uint64_t offset,
int blksz, const blkptr_t *bp)
{
char buf[BPE_PAYLOAD_SIZE];
struct drr_write_embedded *drrw =
&(dsp->dsa_drr->drr_u.drr_write_embedded);
if (dsp->dsa_pending_op != PENDING_NONE) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (EINTR);
dsp->dsa_pending_op = PENDING_NONE;
}
ASSERT(BP_IS_EMBEDDED(bp));
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_WRITE_EMBEDDED;
drrw->drr_object = object;
drrw->drr_offset = offset;
drrw->drr_length = blksz;
drrw->drr_toguid = dsp->dsa_toguid;
drrw->drr_compression = BP_GET_COMPRESS(bp);
drrw->drr_etype = BPE_GET_ETYPE(bp);
drrw->drr_lsize = BPE_GET_LSIZE(bp);
drrw->drr_psize = BPE_GET_PSIZE(bp);
decode_embedded_bp_compressed(bp, buf);
if (dump_bytes(dsp, dsp->dsa_drr, sizeof (dmu_replay_record_t)) != 0)
return (EINTR);
if (dump_bytes(dsp, buf, P2ROUNDUP(drrw->drr_psize, 8)) != 0)
return (EINTR);
return (0);
}
static int
dump_spill(dmu_sendarg_t *dsp, uint64_t object, int blksz, void *data)
{
struct drr_spill *drrs = &(dsp->dsa_drr->drr_u.drr_spill);
if (dsp->dsa_pending_op != PENDING_NONE) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
/* write a SPILL record */
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_SPILL;
drrs->drr_object = object;
drrs->drr_length = blksz;
drrs->drr_toguid = dsp->dsa_toguid;
2008-11-20 20:01:55 +00:00
if (dump_bytes(dsp, dsp->dsa_drr, sizeof (dmu_replay_record_t)))
return (SET_ERROR(EINTR));
if (dump_bytes(dsp, data, blksz))
return (SET_ERROR(EINTR));
2008-11-20 20:01:55 +00:00
return (0);
}
static int
dump_freeobjects(dmu_sendarg_t *dsp, uint64_t firstobj, uint64_t numobjs)
2008-11-20 20:01:55 +00:00
{
struct drr_freeobjects *drrfo = &(dsp->dsa_drr->drr_u.drr_freeobjects);
/* See comment in dump_free(). */
if (!dsp->dsa_incremental)
return (0);
/*
* If there is a pending op, but it's not PENDING_FREEOBJECTS,
* push it out, since free block aggregation can only be done for
* blocks of the same type (i.e., DRR_FREE records can only be
* aggregated with other DRR_FREE records. DRR_FREEOBJECTS records
* can only be aggregated with other DRR_FREEOBJECTS records.
*/
if (dsp->dsa_pending_op != PENDING_NONE &&
dsp->dsa_pending_op != PENDING_FREEOBJECTS) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
if (dsp->dsa_pending_op == PENDING_FREEOBJECTS) {
/*
* See whether this free object array can be aggregated
* with pending one
*/
if (drrfo->drr_firstobj + drrfo->drr_numobjs == firstobj) {
drrfo->drr_numobjs += numobjs;
return (0);
} else {
/* can't be aggregated. Push out pending record */
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
}
2008-11-20 20:01:55 +00:00
/* write a FREEOBJECTS record */
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_FREEOBJECTS;
drrfo->drr_firstobj = firstobj;
drrfo->drr_numobjs = numobjs;
drrfo->drr_toguid = dsp->dsa_toguid;
dsp->dsa_pending_op = PENDING_FREEOBJECTS;
2008-11-20 20:01:55 +00:00
return (0);
}
static int
dump_dnode(dmu_sendarg_t *dsp, uint64_t object, dnode_phys_t *dnp)
2008-11-20 20:01:55 +00:00
{
struct drr_object *drro = &(dsp->dsa_drr->drr_u.drr_object);
2008-11-20 20:01:55 +00:00
if (dnp == NULL || dnp->dn_type == DMU_OT_NONE)
return (dump_freeobjects(dsp, object, 1));
2008-11-20 20:01:55 +00:00
if (dsp->dsa_pending_op != PENDING_NONE) {
if (dump_bytes(dsp, dsp->dsa_drr,
sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
dsp->dsa_pending_op = PENDING_NONE;
}
2008-11-20 20:01:55 +00:00
/* write an OBJECT record */
bzero(dsp->dsa_drr, sizeof (dmu_replay_record_t));
dsp->dsa_drr->drr_type = DRR_OBJECT;
drro->drr_object = object;
drro->drr_type = dnp->dn_type;
drro->drr_bonustype = dnp->dn_bonustype;
drro->drr_blksz = dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT;
drro->drr_bonuslen = dnp->dn_bonuslen;
drro->drr_checksumtype = dnp->dn_checksum;
drro->drr_compress = dnp->dn_compress;
drro->drr_toguid = dsp->dsa_toguid;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if (!(dsp->dsa_featureflags & DMU_BACKUP_FEATURE_LARGE_BLOCKS) &&
drro->drr_blksz > SPA_OLD_MAXBLOCKSIZE)
drro->drr_blksz = SPA_OLD_MAXBLOCKSIZE;
if (dump_bytes(dsp, dsp->dsa_drr, sizeof (dmu_replay_record_t)) != 0)
return (SET_ERROR(EINTR));
2008-11-20 20:01:55 +00:00
if (dump_bytes(dsp, DN_BONUS(dnp), P2ROUNDUP(dnp->dn_bonuslen, 8)) != 0)
return (SET_ERROR(EINTR));
2008-11-20 20:01:55 +00:00
/* Free anything past the end of the file. */
if (dump_free(dsp, object, (dnp->dn_maxblkid + 1) *
(dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT), -1ULL) != 0)
return (SET_ERROR(EINTR));
if (dsp->dsa_err != 0)
return (SET_ERROR(EINTR));
2008-11-20 20:01:55 +00:00
return (0);
}
static boolean_t
backup_do_embed(dmu_sendarg_t *dsp, const blkptr_t *bp)
{
if (!BP_IS_EMBEDDED(bp))
return (B_FALSE);
/*
* Compression function must be legacy, or explicitly enabled.
*/
if ((BP_GET_COMPRESS(bp) >= ZIO_COMPRESS_LEGACY_FUNCTIONS &&
!(dsp->dsa_featureflags & DMU_BACKUP_FEATURE_EMBED_DATA_LZ4)))
return (B_FALSE);
/*
* Embed type must be explicitly enabled.
*/
switch (BPE_GET_ETYPE(bp)) {
case BP_EMBEDDED_TYPE_DATA:
if (dsp->dsa_featureflags & DMU_BACKUP_FEATURE_EMBED_DATA)
return (B_TRUE);
break;
default:
return (B_FALSE);
}
return (B_FALSE);
}
2008-11-20 20:01:55 +00:00
#define BP_SPAN(dnp, level) \
(((uint64_t)dnp->dn_datablkszsec) << (SPA_MINBLOCKSHIFT + \
(level) * (dnp->dn_indblkshift - SPA_BLKPTRSHIFT)))
/* ARGSUSED */
2008-11-20 20:01:55 +00:00
static int
backup_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
2008-11-20 20:01:55 +00:00
{
dmu_sendarg_t *dsp = arg;
2008-11-20 20:01:55 +00:00
dmu_object_type_t type = bp ? BP_GET_TYPE(bp) : DMU_OT_NONE;
int err = 0;
if (issig(JUSTLOOKING) && issig(FORREAL))
return (SET_ERROR(EINTR));
2008-11-20 20:01:55 +00:00
if (zb->zb_object != DMU_META_DNODE_OBJECT &&
DMU_OBJECT_IS_SPECIAL(zb->zb_object)) {
2009-07-02 22:44:48 +00:00
return (0);
} else if (zb->zb_level == ZB_ZIL_LEVEL) {
/*
* If we are sending a non-snapshot (which is allowed on
* read-only pools), it may have a ZIL, which must be ignored.
*/
return (0);
} else if (BP_IS_HOLE(bp) &&
zb->zb_object == DMU_META_DNODE_OBJECT) {
uint64_t span = BP_SPAN(dnp, zb->zb_level);
uint64_t dnobj = (zb->zb_blkid * span) >> DNODE_SHIFT;
err = dump_freeobjects(dsp, dnobj, span >> DNODE_SHIFT);
} else if (BP_IS_HOLE(bp)) {
uint64_t span = BP_SPAN(dnp, zb->zb_level);
err = dump_free(dsp, zb->zb_object, zb->zb_blkid * span, span);
} else if (zb->zb_level > 0 || type == DMU_OT_OBJSET) {
return (0);
} else if (type == DMU_OT_DNODE) {
dnode_phys_t *blk;
2008-11-20 20:01:55 +00:00
int i;
int blksz = BP_GET_LSIZE(bp);
arc_flags_t aflags = ARC_FLAG_WAIT;
arc_buf_t *abuf;
if (arc_read(NULL, spa, bp, arc_getbuf_func, &abuf,
ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL,
&aflags, zb) != 0)
return (SET_ERROR(EIO));
2008-11-20 20:01:55 +00:00
blk = abuf->b_data;
2008-11-20 20:01:55 +00:00
for (i = 0; i < blksz >> DNODE_SHIFT; i++) {
uint64_t dnobj = (zb->zb_blkid <<
(DNODE_BLOCK_SHIFT - DNODE_SHIFT)) + i;
err = dump_dnode(dsp, dnobj, blk+i);
if (err != 0)
2008-11-20 20:01:55 +00:00
break;
}
(void) arc_buf_remove_ref(abuf, &abuf);
} else if (type == DMU_OT_SA) {
arc_flags_t aflags = ARC_FLAG_WAIT;
arc_buf_t *abuf;
2008-11-20 20:01:55 +00:00
int blksz = BP_GET_LSIZE(bp);
if (arc_read(NULL, spa, bp, arc_getbuf_func, &abuf,
ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL,
&aflags, zb) != 0)
return (SET_ERROR(EIO));
err = dump_spill(dsp, zb->zb_object, blksz, abuf->b_data);
(void) arc_buf_remove_ref(abuf, &abuf);
} else if (backup_do_embed(dsp, bp)) {
/* it's an embedded level-0 block of a regular object */
int blksz = dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT;
err = dump_write_embedded(dsp, zb->zb_object,
zb->zb_blkid * blksz, blksz, bp);
} else { /* it's a level-0 block of a regular object */
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
uint64_t offset;
arc_flags_t aflags = ARC_FLAG_WAIT;
arc_buf_t *abuf;
int blksz = BP_GET_LSIZE(bp);
ASSERT3U(blksz, ==, dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT);
ASSERT0(zb->zb_level);
if (arc_read(NULL, spa, bp, arc_getbuf_func, &abuf,
ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL,
&aflags, zb) != 0) {
if (zfs_send_corrupt_data) {
uint64_t *ptr;
/* Send a block filled with 0x"zfs badd bloc" */
abuf = arc_buf_alloc(spa, blksz, &abuf,
ARC_BUFC_DATA);
for (ptr = abuf->b_data;
(char *)ptr < (char *)abuf->b_data + blksz;
ptr++)
*ptr = 0x2f5baddb10cULL;
} else {
return (SET_ERROR(EIO));
}
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
offset = zb->zb_blkid * blksz;
if (!(dsp->dsa_featureflags &
DMU_BACKUP_FEATURE_LARGE_BLOCKS) &&
blksz > SPA_OLD_MAXBLOCKSIZE) {
char *buf = abuf->b_data;
while (blksz > 0 && err == 0) {
int n = MIN(blksz, SPA_OLD_MAXBLOCKSIZE);
err = dump_write(dsp, type, zb->zb_object,
offset, n, NULL, buf);
offset += n;
buf += n;
blksz -= n;
}
} else {
err = dump_write(dsp, type, zb->zb_object,
offset, blksz, bp, abuf->b_data);
}
(void) arc_buf_remove_ref(abuf, &abuf);
2008-11-20 20:01:55 +00:00
}
ASSERT(err == 0 || err == EINTR);
return (err);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
/*
* Releases dp using the specified tag.
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
*/
static int
dmu_send_impl(void *tag, dsl_pool_t *dp, dsl_dataset_t *ds,
zfs_bookmark_phys_t *fromzb, boolean_t is_clone, boolean_t embedok,
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
boolean_t large_block_ok, int outfd, vnode_t *vp, offset_t *off)
2008-11-20 20:01:55 +00:00
{
objset_t *os;
2008-11-20 20:01:55 +00:00
dmu_replay_record_t *drr;
dmu_sendarg_t *dsp;
2008-11-20 20:01:55 +00:00
int err;
uint64_t fromtxg = 0;
uint64_t featureflags = 0;
2008-11-20 20:01:55 +00:00
err = dmu_objset_from_ds(ds, &os);
if (err != 0) {
dsl_pool_rele(dp, tag);
return (err);
}
2008-11-20 20:01:55 +00:00
drr = kmem_zalloc(sizeof (dmu_replay_record_t), KM_SLEEP);
drr->drr_type = DRR_BEGIN;
drr->drr_u.drr_begin.drr_magic = DMU_BACKUP_MAGIC;
DMU_SET_STREAM_HDRTYPE(drr->drr_u.drr_begin.drr_versioninfo,
DMU_SUBSTREAM);
#ifdef _KERNEL
if (dmu_objset_type(os) == DMU_OST_ZFS) {
uint64_t version;
if (zfs_get_zplprop(os, ZFS_PROP_VERSION, &version) != 0) {
kmem_free(drr, sizeof (dmu_replay_record_t));
dsl_pool_rele(dp, tag);
return (SET_ERROR(EINVAL));
}
if (version >= ZPL_VERSION_SA) {
featureflags |= DMU_BACKUP_FEATURE_SA_SPILL;
}
}
#endif
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if (large_block_ok && ds->ds_large_blocks)
featureflags |= DMU_BACKUP_FEATURE_LARGE_BLOCKS;
if (embedok &&
spa_feature_is_active(dp->dp_spa, SPA_FEATURE_EMBEDDED_DATA)) {
featureflags |= DMU_BACKUP_FEATURE_EMBED_DATA;
if (spa_feature_is_active(dp->dp_spa, SPA_FEATURE_LZ4_COMPRESS))
featureflags |= DMU_BACKUP_FEATURE_EMBED_DATA_LZ4;
} else {
embedok = B_FALSE;
}
DMU_SET_FEATUREFLAGS(drr->drr_u.drr_begin.drr_versioninfo,
featureflags);
2008-11-20 20:01:55 +00:00
drr->drr_u.drr_begin.drr_creation_time =
dsl_dataset_phys(ds)->ds_creation_time;
drr->drr_u.drr_begin.drr_type = dmu_objset_type(os);
if (is_clone)
2008-11-20 20:01:55 +00:00
drr->drr_u.drr_begin.drr_flags |= DRR_FLAG_CLONE;
drr->drr_u.drr_begin.drr_toguid = dsl_dataset_phys(ds)->ds_guid;
if (dsl_dataset_phys(ds)->ds_flags & DS_FLAG_CI_DATASET)
2008-11-20 20:01:55 +00:00
drr->drr_u.drr_begin.drr_flags |= DRR_FLAG_CI_DATA;
if (fromzb != NULL) {
drr->drr_u.drr_begin.drr_fromguid = fromzb->zbm_guid;
fromtxg = fromzb->zbm_creation_txg;
}
2008-11-20 20:01:55 +00:00
dsl_dataset_name(ds, drr->drr_u.drr_begin.drr_toname);
if (!ds->ds_is_snapshot) {
(void) strlcat(drr->drr_u.drr_begin.drr_toname, "@--head--",
sizeof (drr->drr_u.drr_begin.drr_toname));
}
2008-11-20 20:01:55 +00:00
dsp = kmem_zalloc(sizeof (dmu_sendarg_t), KM_SLEEP);
dsp->dsa_drr = drr;
dsp->dsa_vp = vp;
dsp->dsa_outfd = outfd;
dsp->dsa_proc = curproc;
dsp->dsa_os = os;
dsp->dsa_off = off;
dsp->dsa_toguid = dsl_dataset_phys(ds)->ds_guid;
ZIO_SET_CHECKSUM(&dsp->dsa_zc, 0, 0, 0, 0);
dsp->dsa_pending_op = PENDING_NONE;
dsp->dsa_incremental = (fromzb != NULL);
dsp->dsa_featureflags = featureflags;
mutex_enter(&ds->ds_sendstream_lock);
list_insert_head(&ds->ds_sendstreams, dsp);
mutex_exit(&ds->ds_sendstream_lock);
dsl_dataset_long_hold(ds, FTAG);
dsl_pool_rele(dp, tag);
if (dump_bytes(dsp, drr, sizeof (dmu_replay_record_t)) != 0) {
err = dsp->dsa_err;
goto out;
2008-11-20 20:01:55 +00:00
}
err = traverse_dataset(ds, fromtxg, TRAVERSE_PRE | TRAVERSE_PREFETCH,
backup_cb, dsp);
2008-11-20 20:01:55 +00:00
if (dsp->dsa_pending_op != PENDING_NONE)
if (dump_bytes(dsp, drr, sizeof (dmu_replay_record_t)) != 0)
err = SET_ERROR(EINTR);
if (err != 0) {
if (err == EINTR && dsp->dsa_err != 0)
err = dsp->dsa_err;
goto out;
2008-11-20 20:01:55 +00:00
}
bzero(drr, sizeof (dmu_replay_record_t));
drr->drr_type = DRR_END;
drr->drr_u.drr_end.drr_checksum = dsp->dsa_zc;
drr->drr_u.drr_end.drr_toguid = dsp->dsa_toguid;
2008-11-20 20:01:55 +00:00
if (dump_bytes(dsp, drr, sizeof (dmu_replay_record_t)) != 0) {
err = dsp->dsa_err;
goto out;
2008-11-20 20:01:55 +00:00
}
out:
mutex_enter(&ds->ds_sendstream_lock);
list_remove(&ds->ds_sendstreams, dsp);
mutex_exit(&ds->ds_sendstream_lock);
2008-11-20 20:01:55 +00:00
kmem_free(drr, sizeof (dmu_replay_record_t));
kmem_free(dsp, sizeof (dmu_sendarg_t));
2008-11-20 20:01:55 +00:00
dsl_dataset_long_rele(ds, FTAG);
return (err);
2008-11-20 20:01:55 +00:00
}
int
dmu_send_obj(const char *pool, uint64_t tosnap, uint64_t fromsnap,
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
boolean_t embedok, boolean_t large_block_ok,
int outfd, vnode_t *vp, offset_t *off)
{
dsl_pool_t *dp;
dsl_dataset_t *ds;
dsl_dataset_t *fromds = NULL;
int err;
err = dsl_pool_hold(pool, FTAG, &dp);
if (err != 0)
return (err);
err = dsl_dataset_hold_obj(dp, tosnap, FTAG, &ds);
if (err != 0) {
dsl_pool_rele(dp, FTAG);
return (err);
}
if (fromsnap != 0) {
zfs_bookmark_phys_t zb;
boolean_t is_clone;
err = dsl_dataset_hold_obj(dp, fromsnap, FTAG, &fromds);
if (err != 0) {
dsl_dataset_rele(ds, FTAG);
dsl_pool_rele(dp, FTAG);
return (err);
}
if (!dsl_dataset_is_before(ds, fromds, 0))
err = SET_ERROR(EXDEV);
zb.zbm_creation_time =
dsl_dataset_phys(fromds)->ds_creation_time;
zb.zbm_creation_txg = dsl_dataset_phys(fromds)->ds_creation_txg;
zb.zbm_guid = dsl_dataset_phys(fromds)->ds_guid;
is_clone = (fromds->ds_dir != ds->ds_dir);
dsl_dataset_rele(fromds, FTAG);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
err = dmu_send_impl(FTAG, dp, ds, &zb, is_clone,
embedok, large_block_ok, outfd, vp, off);
} else {
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
err = dmu_send_impl(FTAG, dp, ds, NULL, B_FALSE,
embedok, large_block_ok, outfd, vp, off);
}
dsl_dataset_rele(ds, FTAG);
return (err);
}
int
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
dmu_send(const char *tosnap, const char *fromsnap,
boolean_t embedok, boolean_t large_block_ok,
int outfd, vnode_t *vp, offset_t *off)
{
dsl_pool_t *dp;
dsl_dataset_t *ds;
int err;
boolean_t owned = B_FALSE;
if (fromsnap != NULL && strpbrk(fromsnap, "@#") == NULL)
return (SET_ERROR(EINVAL));
err = dsl_pool_hold(tosnap, FTAG, &dp);
if (err != 0)
return (err);
if (strchr(tosnap, '@') == NULL && spa_writeable(dp->dp_spa)) {
/*
* We are sending a filesystem or volume. Ensure
* that it doesn't change by owning the dataset.
*/
err = dsl_dataset_own(dp, tosnap, FTAG, &ds);
owned = B_TRUE;
} else {
err = dsl_dataset_hold(dp, tosnap, FTAG, &ds);
}
if (err != 0) {
dsl_pool_rele(dp, FTAG);
return (err);
}
if (fromsnap != NULL) {
zfs_bookmark_phys_t zb;
boolean_t is_clone = B_FALSE;
int fsnamelen = strchr(tosnap, '@') - tosnap;
/*
* If the fromsnap is in a different filesystem, then
* mark the send stream as a clone.
*/
if (strncmp(tosnap, fromsnap, fsnamelen) != 0 ||
(fromsnap[fsnamelen] != '@' &&
fromsnap[fsnamelen] != '#')) {
is_clone = B_TRUE;
}
if (strchr(fromsnap, '@')) {
dsl_dataset_t *fromds;
err = dsl_dataset_hold(dp, fromsnap, FTAG, &fromds);
if (err == 0) {
if (!dsl_dataset_is_before(ds, fromds, 0))
err = SET_ERROR(EXDEV);
zb.zbm_creation_time =
dsl_dataset_phys(fromds)->ds_creation_time;
zb.zbm_creation_txg =
dsl_dataset_phys(fromds)->ds_creation_txg;
zb.zbm_guid = dsl_dataset_phys(fromds)->ds_guid;
is_clone = (ds->ds_dir != fromds->ds_dir);
dsl_dataset_rele(fromds, FTAG);
}
} else {
err = dsl_bookmark_lookup(dp, fromsnap, ds, &zb);
}
if (err != 0) {
dsl_dataset_rele(ds, FTAG);
dsl_pool_rele(dp, FTAG);
return (err);
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
err = dmu_send_impl(FTAG, dp, ds, &zb, is_clone,
embedok, large_block_ok, outfd, vp, off);
} else {
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
err = dmu_send_impl(FTAG, dp, ds, NULL, B_FALSE,
embedok, large_block_ok, outfd, vp, off);
}
if (owned)
dsl_dataset_disown(ds, FTAG);
else
dsl_dataset_rele(ds, FTAG);
return (err);
}
static int
dmu_adjust_send_estimate_for_indirects(dsl_dataset_t *ds, uint64_t size,
uint64_t *sizep)
{
int err;
/*
* Assume that space (both on-disk and in-stream) is dominated by
* data. We will adjust for indirect blocks and the copies property,
* but ignore per-object space used (eg, dnodes and DRR_OBJECT records).
*/
/*
* Subtract out approximate space used by indirect blocks.
* Assume most space is used by data blocks (non-indirect, non-dnode).
* Assume all blocks are recordsize. Assume ditto blocks and
* internal fragmentation counter out compression.
*
* Therefore, space used by indirect blocks is sizeof(blkptr_t) per
* block, which we observe in practice.
*/
uint64_t recordsize;
err = dsl_prop_get_int_ds(ds, "recordsize", &recordsize);
if (err != 0)
return (err);
size -= size / recordsize * sizeof (blkptr_t);
/* Add in the space for the record associated with each block. */
size += size / recordsize * sizeof (dmu_replay_record_t);
*sizep = size;
return (0);
}
int
dmu_send_estimate(dsl_dataset_t *ds, dsl_dataset_t *fromds, uint64_t *sizep)
{
int err;
uint64_t size;
ASSERT(dsl_pool_config_held(ds->ds_dir->dd_pool));
/* tosnap must be a snapshot */
if (!ds->ds_is_snapshot)
return (SET_ERROR(EINVAL));
/* fromsnap, if provided, must be a snapshot */
if (fromds != NULL && !fromds->ds_is_snapshot)
return (SET_ERROR(EINVAL));
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
/*
* fromsnap must be an earlier snapshot from the same fs as tosnap,
* or the origin's fs.
*/
if (fromds != NULL && !dsl_dataset_is_before(ds, fromds, 0))
return (SET_ERROR(EXDEV));
/* Get uncompressed size estimate of changed data. */
if (fromds == NULL) {
size = dsl_dataset_phys(ds)->ds_uncompressed_bytes;
} else {
uint64_t used, comp;
err = dsl_dataset_space_written(fromds, ds,
&used, &comp, &size);
if (err != 0)
return (err);
}
err = dmu_adjust_send_estimate_for_indirects(ds, size, sizep);
return (err);
}
/*
* Simple callback used to traverse the blocks of a snapshot and sum their
* uncompressed size
*/
/* ARGSUSED */
static int
dmu_calculate_send_traversal(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
{
uint64_t *spaceptr = arg;
if (bp != NULL && !BP_IS_HOLE(bp)) {
*spaceptr += BP_GET_UCSIZE(bp);
}
return (0);
}
/*
* Given a desination snapshot and a TXG, calculate the approximate size of a
* send stream sent from that TXG. from_txg may be zero, indicating that the
* whole snapshot will be sent.
*/
int
dmu_send_estimate_from_txg(dsl_dataset_t *ds, uint64_t from_txg,
uint64_t *sizep)
{
int err;
uint64_t size = 0;
ASSERT(dsl_pool_config_held(ds->ds_dir->dd_pool));
/* tosnap must be a snapshot */
if (!dsl_dataset_is_snapshot(ds))
return (SET_ERROR(EINVAL));
/* verify that from_txg is before the provided snapshot was taken */
if (from_txg >= dsl_dataset_phys(ds)->ds_creation_txg) {
return (SET_ERROR(EXDEV));
}
/*
* traverse the blocks of the snapshot with birth times after
* from_txg, summing their uncompressed size
*/
err = traverse_dataset(ds, from_txg, TRAVERSE_POST,
dmu_calculate_send_traversal, &size);
if (err)
return (err);
err = dmu_adjust_send_estimate_for_indirects(ds, size, sizep);
return (err);
}
typedef struct dmu_recv_begin_arg {
const char *drba_origin;
dmu_recv_cookie_t *drba_cookie;
cred_t *drba_cred;
uint64_t drba_snapobj;
} dmu_recv_begin_arg_t;
2008-11-20 20:01:55 +00:00
static int
recv_begin_check_existing_impl(dmu_recv_begin_arg_t *drba, dsl_dataset_t *ds,
uint64_t fromguid)
2008-11-20 20:01:55 +00:00
{
uint64_t val;
int error;
dsl_pool_t *dp = ds->ds_dir->dd_pool;
2008-11-20 20:01:55 +00:00
/* temporary clone name must not exist */
error = zap_lookup(dp->dp_meta_objset,
dsl_dir_phys(ds->ds_dir)->dd_child_dir_zapobj, recv_clone_name,
8, 1, &val);
if (error != ENOENT)
return (error == 0 ? EBUSY : error);
/* new snapshot name must not exist */
error = zap_lookup(dp->dp_meta_objset,
dsl_dataset_phys(ds)->ds_snapnames_zapobj,
drba->drba_cookie->drc_tosnap, 8, 1, &val);
if (error != ENOENT)
return (error == 0 ? EEXIST : error);
/*
* Check snapshot limit before receiving. We'll recheck again at the
* end, but might as well abort before receiving if we're already over
* the limit.
*
* Note that we do not check the file system limit with
* dsl_dir_fscount_check because the temporary %clones don't count
* against that limit.
*/
error = dsl_fs_ss_limit_check(ds->ds_dir, 1, ZFS_PROP_SNAPSHOT_LIMIT,
NULL, drba->drba_cred);
if (error != 0)
return (error);
if (fromguid != 0) {
dsl_dataset_t *snap;
uint64_t obj = dsl_dataset_phys(ds)->ds_prev_snap_obj;
/* Find snapshot in this dir that matches fromguid. */
while (obj != 0) {
error = dsl_dataset_hold_obj(dp, obj, FTAG,
&snap);
if (error != 0)
return (SET_ERROR(ENODEV));
if (snap->ds_dir != ds->ds_dir) {
dsl_dataset_rele(snap, FTAG);
return (SET_ERROR(ENODEV));
}
if (dsl_dataset_phys(snap)->ds_guid == fromguid)
break;
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_dataset_rele(snap, FTAG);
}
if (obj == 0)
return (SET_ERROR(ENODEV));
2008-11-20 20:01:55 +00:00
if (drba->drba_cookie->drc_force) {
drba->drba_snapobj = obj;
} else {
/*
* If we are not forcing, there must be no
* changes since fromsnap.
*/
if (dsl_dataset_modified_since_snap(ds, snap)) {
dsl_dataset_rele(snap, FTAG);
return (SET_ERROR(ETXTBSY));
}
drba->drba_snapobj = ds->ds_prev->ds_object;
}
dsl_dataset_rele(snap, FTAG);
} else {
/* if full, then must be forced */
if (!drba->drba_cookie->drc_force)
return (SET_ERROR(EEXIST));
/* start from $ORIGIN@$ORIGIN, if supported */
drba->drba_snapobj = dp->dp_origin_snap != NULL ?
dp->dp_origin_snap->ds_object : 0;
}
2008-11-20 20:01:55 +00:00
return (0);
}
static int
dmu_recv_begin_check(void *arg, dmu_tx_t *tx)
{
dmu_recv_begin_arg_t *drba = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
struct drr_begin *drrb = drba->drba_cookie->drc_drrb;
uint64_t fromguid = drrb->drr_fromguid;
int flags = drrb->drr_flags;
int error;
uint64_t featureflags = DMU_GET_FEATUREFLAGS(drrb->drr_versioninfo);
dsl_dataset_t *ds;
const char *tofs = drba->drba_cookie->drc_tofs;
/* already checked */
ASSERT3U(drrb->drr_magic, ==, DMU_BACKUP_MAGIC);
if (DMU_GET_STREAM_HDRTYPE(drrb->drr_versioninfo) ==
DMU_COMPOUNDSTREAM ||
drrb->drr_type >= DMU_OST_NUMTYPES ||
((flags & DRR_FLAG_CLONE) && drba->drba_origin == NULL))
return (SET_ERROR(EINVAL));
/* Verify pool version supports SA if SA_SPILL feature set */
if ((featureflags & DMU_BACKUP_FEATURE_SA_SPILL) &&
spa_version(dp->dp_spa) < SPA_VERSION_SA)
return (SET_ERROR(ENOTSUP));
/*
* The receiving code doesn't know how to translate a WRITE_EMBEDDED
* record to a plan WRITE record, so the pool must have the
* EMBEDDED_DATA feature enabled if the stream has WRITE_EMBEDDED
* records. Same with WRITE_EMBEDDED records that use LZ4 compression.
*/
if ((featureflags & DMU_BACKUP_FEATURE_EMBED_DATA) &&
!spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_EMBEDDED_DATA))
return (SET_ERROR(ENOTSUP));
if ((featureflags & DMU_BACKUP_FEATURE_EMBED_DATA_LZ4) &&
!spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_LZ4_COMPRESS))
return (SET_ERROR(ENOTSUP));
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
/*
* The receiving code doesn't know how to translate large blocks
* to smaller ones, so the pool must have the LARGE_BLOCKS
* feature enabled if the stream has LARGE_BLOCKS.
*/
if ((featureflags & DMU_BACKUP_FEATURE_LARGE_BLOCKS) &&
!spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_LARGE_BLOCKS))
return (SET_ERROR(ENOTSUP));
error = dsl_dataset_hold(dp, tofs, FTAG, &ds);
if (error == 0) {
/* target fs already exists; recv into temp clone */
/* Can't recv a clone into an existing fs */
if (flags & DRR_FLAG_CLONE) {
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(EINVAL));
}
error = recv_begin_check_existing_impl(drba, ds, fromguid);
dsl_dataset_rele(ds, FTAG);
} else if (error == ENOENT) {
/* target fs does not exist; must be a full backup or clone */
char buf[MAXNAMELEN];
/*
* If it's a non-clone incremental, we are missing the
* target fs, so fail the recv.
*/
if (fromguid != 0 && !(flags & DRR_FLAG_CLONE))
return (SET_ERROR(ENOENT));
/* Open the parent of tofs */
ASSERT3U(strlen(tofs), <, MAXNAMELEN);
(void) strlcpy(buf, tofs, strrchr(tofs, '/') - tofs + 1);
error = dsl_dataset_hold(dp, buf, FTAG, &ds);
if (error != 0)
return (error);
/*
* Check filesystem and snapshot limits before receiving. We'll
* recheck snapshot limits again at the end (we create the
* filesystems and increment those counts during begin_sync).
*/
error = dsl_fs_ss_limit_check(ds->ds_dir, 1,
ZFS_PROP_FILESYSTEM_LIMIT, NULL, drba->drba_cred);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
error = dsl_fs_ss_limit_check(ds->ds_dir, 1,
ZFS_PROP_SNAPSHOT_LIMIT, NULL, drba->drba_cred);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
if (drba->drba_origin != NULL) {
dsl_dataset_t *origin;
error = dsl_dataset_hold(dp, drba->drba_origin,
FTAG, &origin);
if (error != 0) {
dsl_dataset_rele(ds, FTAG);
return (error);
}
if (!origin->ds_is_snapshot) {
dsl_dataset_rele(origin, FTAG);
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(EINVAL));
}
if (dsl_dataset_phys(origin)->ds_guid != fromguid) {
dsl_dataset_rele(origin, FTAG);
dsl_dataset_rele(ds, FTAG);
return (SET_ERROR(ENODEV));
}
dsl_dataset_rele(origin, FTAG);
}
dsl_dataset_rele(ds, FTAG);
error = 0;
}
return (error);
2008-11-20 20:01:55 +00:00
}
static void
dmu_recv_begin_sync(void *arg, dmu_tx_t *tx)
2008-11-20 20:01:55 +00:00
{
dmu_recv_begin_arg_t *drba = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
struct drr_begin *drrb = drba->drba_cookie->drc_drrb;
const char *tofs = drba->drba_cookie->drc_tofs;
dsl_dataset_t *ds, *newds;
2008-11-20 20:01:55 +00:00
uint64_t dsobj;
int error;
uint64_t crflags;
crflags = (drrb->drr_flags & DRR_FLAG_CI_DATA) ?
DS_FLAG_CI_DATASET : 0;
2008-11-20 20:01:55 +00:00
error = dsl_dataset_hold(dp, tofs, FTAG, &ds);
if (error == 0) {
/* create temporary clone */
dsl_dataset_t *snap = NULL;
if (drba->drba_snapobj != 0) {
VERIFY0(dsl_dataset_hold_obj(dp,
drba->drba_snapobj, FTAG, &snap));
}
dsobj = dsl_dataset_create_sync(ds->ds_dir, recv_clone_name,
snap, crflags, drba->drba_cred, tx);
dsl_dataset_rele(snap, FTAG);
dsl_dataset_rele(ds, FTAG);
} else {
dsl_dir_t *dd;
const char *tail;
dsl_dataset_t *origin = NULL;
VERIFY0(dsl_dir_hold(dp, tofs, FTAG, &dd, &tail));
if (drba->drba_origin != NULL) {
VERIFY0(dsl_dataset_hold(dp, drba->drba_origin,
FTAG, &origin));
}
/* Create new dataset. */
dsobj = dsl_dataset_create_sync(dd,
strrchr(tofs, '/') + 1,
origin, crflags, drba->drba_cred, tx);
if (origin != NULL)
dsl_dataset_rele(origin, FTAG);
dsl_dir_rele(dd, FTAG);
drba->drba_cookie->drc_newfs = B_TRUE;
}
VERIFY0(dsl_dataset_own_obj(dp, dsobj, dmu_recv_tag, &newds));
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if ((DMU_GET_FEATUREFLAGS(drrb->drr_versioninfo) &
DMU_BACKUP_FEATURE_LARGE_BLOCKS) &&
!newds->ds_large_blocks) {
dsl_dataset_activate_large_blocks_sync_impl(dsobj, tx);
newds->ds_large_blocks = B_TRUE;
}
dmu_buf_will_dirty(newds->ds_dbuf, tx);
dsl_dataset_phys(newds)->ds_flags |= DS_FLAG_INCONSISTENT;
2008-11-20 20:01:55 +00:00
/*
* If we actually created a non-clone, we need to create the
* objset in our new dataset.
*/
if (BP_IS_HOLE(dsl_dataset_get_blkptr(newds))) {
(void) dmu_objset_create_impl(dp->dp_spa,
newds, dsl_dataset_get_blkptr(newds), drrb->drr_type, tx);
}
2008-11-20 20:01:55 +00:00
drba->drba_cookie->drc_ds = newds;
spa_history_log_internal_ds(newds, "receive", tx, "");
2008-11-20 20:01:55 +00:00
}
/*
* NB: callers *MUST* call dmu_recv_stream() if dmu_recv_begin()
* succeeds; otherwise we will leak the holds on the datasets.
*/
int
dmu_recv_begin(char *tofs, char *tosnap, struct drr_begin *drrb,
boolean_t force, char *origin, dmu_recv_cookie_t *drc)
2008-11-20 20:01:55 +00:00
{
dmu_recv_begin_arg_t drba = { 0 };
dmu_replay_record_t *drr;
2008-11-20 20:01:55 +00:00
bzero(drc, sizeof (dmu_recv_cookie_t));
drc->drc_drrb = drrb;
drc->drc_tosnap = tosnap;
drc->drc_tofs = tofs;
2008-11-20 20:01:55 +00:00
drc->drc_force = force;
drc->drc_cred = CRED();
2008-11-20 20:01:55 +00:00
if (drrb->drr_magic == BSWAP_64(DMU_BACKUP_MAGIC))
drc->drc_byteswap = B_TRUE;
else if (drrb->drr_magic != DMU_BACKUP_MAGIC)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
drr = kmem_zalloc(sizeof (dmu_replay_record_t), KM_SLEEP);
drr->drr_type = DRR_BEGIN;
drr->drr_u.drr_begin = *drc->drc_drrb;
if (drc->drc_byteswap) {
fletcher_4_incremental_byteswap(drr,
sizeof (dmu_replay_record_t), &drc->drc_cksum);
} else {
fletcher_4_incremental_native(drr,
sizeof (dmu_replay_record_t), &drc->drc_cksum);
}
kmem_free(drr, sizeof (dmu_replay_record_t));
if (drc->drc_byteswap) {
drrb->drr_magic = BSWAP_64(drrb->drr_magic);
drrb->drr_versioninfo = BSWAP_64(drrb->drr_versioninfo);
drrb->drr_creation_time = BSWAP_64(drrb->drr_creation_time);
drrb->drr_type = BSWAP_32(drrb->drr_type);
drrb->drr_toguid = BSWAP_64(drrb->drr_toguid);
drrb->drr_fromguid = BSWAP_64(drrb->drr_fromguid);
2008-11-20 20:01:55 +00:00
}
drba.drba_origin = origin;
drba.drba_cookie = drc;
drba.drba_cred = CRED();
return (dsl_sync_task(tofs, dmu_recv_begin_check, dmu_recv_begin_sync,
&drba, 5, ZFS_SPACE_CHECK_NORMAL));
2008-11-20 20:01:55 +00:00
}
struct restorearg {
int err;
boolean_t byteswap;
2008-11-20 20:01:55 +00:00
vnode_t *vp;
char *buf;
uint64_t voff;
int bufsize; /* amount of memory allocated for buf */
zio_cksum_t cksum;
avl_tree_t *guid_to_ds_map;
2008-11-20 20:01:55 +00:00
};
typedef struct guid_map_entry {
uint64_t guid;
dsl_dataset_t *gme_ds;
avl_node_t avlnode;
} guid_map_entry_t;
static int
guid_compare(const void *arg1, const void *arg2)
{
const guid_map_entry_t *gmep1 = arg1;
const guid_map_entry_t *gmep2 = arg2;
if (gmep1->guid < gmep2->guid)
return (-1);
else if (gmep1->guid > gmep2->guid)
return (1);
return (0);
}
static void
free_guid_map_onexit(void *arg)
{
avl_tree_t *ca = arg;
void *cookie = NULL;
guid_map_entry_t *gmep;
while ((gmep = avl_destroy_nodes(ca, &cookie)) != NULL) {
dsl_dataset_long_rele(gmep->gme_ds, gmep);
dsl_dataset_rele(gmep->gme_ds, gmep);
kmem_free(gmep, sizeof (guid_map_entry_t));
}
avl_destroy(ca);
kmem_free(ca, sizeof (avl_tree_t));
}
2008-11-20 20:01:55 +00:00
static void *
restore_read(struct restorearg *ra, int len, char *buf)
2008-11-20 20:01:55 +00:00
{
int done = 0;
if (buf == NULL)
buf = ra->buf;
2008-11-20 20:01:55 +00:00
/* some things will require 8-byte alignment, so everything must */
ASSERT0(len % 8);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
ASSERT3U(len, <=, ra->bufsize);
2008-11-20 20:01:55 +00:00
while (done < len) {
ssize_t resid;
ra->err = vn_rdwr(UIO_READ, ra->vp,
buf + done, len - done,
2008-11-20 20:01:55 +00:00
ra->voff, UIO_SYSSPACE, FAPPEND,
RLIM64_INFINITY, CRED(), &resid);
if (resid == len - done)
ra->err = SET_ERROR(EINVAL);
2008-11-20 20:01:55 +00:00
ra->voff += len - done - resid;
done = len - resid;
if (ra->err != 0)
2008-11-20 20:01:55 +00:00
return (NULL);
}
ASSERT3U(done, ==, len);
if (ra->byteswap)
fletcher_4_incremental_byteswap(buf, len, &ra->cksum);
2008-11-20 20:01:55 +00:00
else
fletcher_4_incremental_native(buf, len, &ra->cksum);
return (buf);
2008-11-20 20:01:55 +00:00
}
noinline static void
2008-11-20 20:01:55 +00:00
backup_byteswap(dmu_replay_record_t *drr)
{
#define DO64(X) (drr->drr_u.X = BSWAP_64(drr->drr_u.X))
#define DO32(X) (drr->drr_u.X = BSWAP_32(drr->drr_u.X))
drr->drr_type = BSWAP_32(drr->drr_type);
drr->drr_payloadlen = BSWAP_32(drr->drr_payloadlen);
switch (drr->drr_type) {
case DRR_BEGIN:
DO64(drr_begin.drr_magic);
DO64(drr_begin.drr_versioninfo);
2008-11-20 20:01:55 +00:00
DO64(drr_begin.drr_creation_time);
DO32(drr_begin.drr_type);
DO32(drr_begin.drr_flags);
DO64(drr_begin.drr_toguid);
DO64(drr_begin.drr_fromguid);
break;
case DRR_OBJECT:
DO64(drr_object.drr_object);
DO32(drr_object.drr_type);
DO32(drr_object.drr_bonustype);
DO32(drr_object.drr_blksz);
DO32(drr_object.drr_bonuslen);
DO64(drr_object.drr_toguid);
2008-11-20 20:01:55 +00:00
break;
case DRR_FREEOBJECTS:
DO64(drr_freeobjects.drr_firstobj);
DO64(drr_freeobjects.drr_numobjs);
DO64(drr_freeobjects.drr_toguid);
2008-11-20 20:01:55 +00:00
break;
case DRR_WRITE:
DO64(drr_write.drr_object);
DO32(drr_write.drr_type);
DO64(drr_write.drr_offset);
DO64(drr_write.drr_length);
DO64(drr_write.drr_toguid);
DO64(drr_write.drr_key.ddk_cksum.zc_word[0]);
DO64(drr_write.drr_key.ddk_cksum.zc_word[1]);
DO64(drr_write.drr_key.ddk_cksum.zc_word[2]);
DO64(drr_write.drr_key.ddk_cksum.zc_word[3]);
DO64(drr_write.drr_key.ddk_prop);
break;
case DRR_WRITE_BYREF:
DO64(drr_write_byref.drr_object);
DO64(drr_write_byref.drr_offset);
DO64(drr_write_byref.drr_length);
DO64(drr_write_byref.drr_toguid);
DO64(drr_write_byref.drr_refguid);
DO64(drr_write_byref.drr_refobject);
DO64(drr_write_byref.drr_refoffset);
DO64(drr_write_byref.drr_key.ddk_cksum.zc_word[0]);
DO64(drr_write_byref.drr_key.ddk_cksum.zc_word[1]);
DO64(drr_write_byref.drr_key.ddk_cksum.zc_word[2]);
DO64(drr_write_byref.drr_key.ddk_cksum.zc_word[3]);
DO64(drr_write_byref.drr_key.ddk_prop);
2008-11-20 20:01:55 +00:00
break;
case DRR_WRITE_EMBEDDED:
DO64(drr_write_embedded.drr_object);
DO64(drr_write_embedded.drr_offset);
DO64(drr_write_embedded.drr_length);
DO64(drr_write_embedded.drr_toguid);
DO32(drr_write_embedded.drr_lsize);
DO32(drr_write_embedded.drr_psize);
break;
2008-11-20 20:01:55 +00:00
case DRR_FREE:
DO64(drr_free.drr_object);
DO64(drr_free.drr_offset);
DO64(drr_free.drr_length);
DO64(drr_free.drr_toguid);
break;
case DRR_SPILL:
DO64(drr_spill.drr_object);
DO64(drr_spill.drr_length);
DO64(drr_spill.drr_toguid);
2008-11-20 20:01:55 +00:00
break;
case DRR_END:
DO64(drr_end.drr_checksum.zc_word[0]);
DO64(drr_end.drr_checksum.zc_word[1]);
DO64(drr_end.drr_checksum.zc_word[2]);
DO64(drr_end.drr_checksum.zc_word[3]);
DO64(drr_end.drr_toguid);
2008-11-20 20:01:55 +00:00
break;
default:
break;
2008-11-20 20:01:55 +00:00
}
#undef DO64
#undef DO32
}
2014-09-12 03:28:35 +00:00
static inline uint8_t
deduce_nblkptr(dmu_object_type_t bonus_type, uint64_t bonus_size)
{
if (bonus_type == DMU_OT_SA) {
return (1);
} else {
return (1 +
((DN_MAX_BONUSLEN - bonus_size) >> SPA_BLKPTRSHIFT));
}
}
noinline static int
2008-11-20 20:01:55 +00:00
restore_object(struct restorearg *ra, objset_t *os, struct drr_object *drro)
{
2014-09-12 03:28:35 +00:00
dmu_object_info_t doi;
2008-11-20 20:01:55 +00:00
dmu_tx_t *tx;
void *data = NULL;
2014-09-12 03:28:35 +00:00
uint64_t object;
int err;
2008-11-20 20:01:55 +00:00
if (drro->drr_type == DMU_OT_NONE ||
!DMU_OT_IS_VALID(drro->drr_type) ||
!DMU_OT_IS_VALID(drro->drr_bonustype) ||
drro->drr_checksumtype >= ZIO_CHECKSUM_FUNCTIONS ||
2008-11-20 20:01:55 +00:00
drro->drr_compress >= ZIO_COMPRESS_FUNCTIONS ||
P2PHASE(drro->drr_blksz, SPA_MINBLOCKSIZE) ||
drro->drr_blksz < SPA_MINBLOCKSIZE ||
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
drro->drr_blksz > spa_maxblocksize(dmu_objset_spa(os)) ||
2008-11-20 20:01:55 +00:00
drro->drr_bonuslen > DN_MAX_BONUSLEN) {
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
}
2014-09-12 03:28:35 +00:00
err = dmu_object_info(os, drro->drr_object, &doi);
2009-07-02 22:44:48 +00:00
if (err != 0 && err != ENOENT)
return (SET_ERROR(EINVAL));
2014-09-12 03:28:35 +00:00
object = err == 0 ? drro->drr_object : DMU_NEW_OBJECT;
2009-07-02 22:44:48 +00:00
if (drro->drr_bonuslen) {
data = restore_read(ra, P2ROUNDUP(drro->drr_bonuslen, 8), NULL);
if (ra->err != 0)
return (ra->err);
}
2014-09-12 03:28:35 +00:00
/*
* If we are losing blkptrs or changing the block size this must
* be a new file instance. We must clear out the previous file
* contents before we can change this type of metadata in the dnode.
*/
if (err == 0) {
int nblkptr;
nblkptr = deduce_nblkptr(drro->drr_bonustype,
drro->drr_bonuslen);
if (drro->drr_blksz != doi.doi_data_block_size ||
nblkptr < doi.doi_nblkptr) {
err = dmu_free_long_range(os, drro->drr_object,
0, DMU_OBJECT_END);
if (err != 0)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
}
2014-09-12 03:28:35 +00:00
}
tx = dmu_tx_create(os);
dmu_tx_hold_bonus(tx, object);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
return (err);
}
if (object == DMU_NEW_OBJECT) {
/* currently free, want to be allocated */
2008-11-20 20:01:55 +00:00
err = dmu_object_claim(os, drro->drr_object,
drro->drr_type, drro->drr_blksz,
drro->drr_bonustype, drro->drr_bonuslen, tx);
2014-09-12 03:28:35 +00:00
} else if (drro->drr_type != doi.doi_type ||
drro->drr_blksz != doi.doi_data_block_size ||
drro->drr_bonustype != doi.doi_bonus_type ||
drro->drr_bonuslen != doi.doi_bonus_size) {
/* currently allocated, but with different properties */
2008-11-20 20:01:55 +00:00
err = dmu_object_reclaim(os, drro->drr_object,
drro->drr_type, drro->drr_blksz,
2014-09-12 03:28:35 +00:00
drro->drr_bonustype, drro->drr_bonuslen, tx);
2008-11-20 20:01:55 +00:00
}
if (err != 0) {
2014-09-12 03:28:35 +00:00
dmu_tx_commit(tx);
return (SET_ERROR(EINVAL));
}
2009-07-02 22:44:48 +00:00
dmu_object_set_checksum(os, drro->drr_object, drro->drr_checksumtype,
tx);
2008-11-20 20:01:55 +00:00
dmu_object_set_compress(os, drro->drr_object, drro->drr_compress, tx);
if (data != NULL) {
2008-11-20 20:01:55 +00:00
dmu_buf_t *db;
2008-11-20 20:01:55 +00:00
VERIFY(0 == dmu_bonus_hold(os, drro->drr_object, FTAG, &db));
dmu_buf_will_dirty(db, tx);
ASSERT3U(db->db_size, >=, drro->drr_bonuslen);
bcopy(data, db->db_data, drro->drr_bonuslen);
if (ra->byteswap) {
dmu_object_byteswap_t byteswap =
DMU_OT_BYTESWAP(drro->drr_bonustype);
dmu_ot_byteswap[byteswap].ob_func(db->db_data,
2008-11-20 20:01:55 +00:00
drro->drr_bonuslen);
}
dmu_buf_rele(db, FTAG);
}
dmu_tx_commit(tx);
return (0);
}
/* ARGSUSED */
noinline static int
2008-11-20 20:01:55 +00:00
restore_freeobjects(struct restorearg *ra, objset_t *os,
struct drr_freeobjects *drrfo)
{
uint64_t obj;
if (drrfo->drr_firstobj + drrfo->drr_numobjs < drrfo->drr_firstobj)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
for (obj = drrfo->drr_firstobj;
obj < drrfo->drr_firstobj + drrfo->drr_numobjs;
(void) dmu_object_next(os, &obj, FALSE, 0)) {
int err;
if (dmu_object_info(os, obj, NULL) != 0)
continue;
err = dmu_free_long_object(os, obj);
if (err != 0)
2008-11-20 20:01:55 +00:00
return (err);
}
return (0);
}
noinline static int
2008-11-20 20:01:55 +00:00
restore_write(struct restorearg *ra, objset_t *os,
struct drr_write *drrw)
{
dmu_tx_t *tx;
dmu_buf_t *bonus;
arc_buf_t *abuf;
2008-11-20 20:01:55 +00:00
void *data;
int err;
if (drrw->drr_offset + drrw->drr_length < drrw->drr_offset ||
!DMU_OT_IS_VALID(drrw->drr_type))
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
if (dmu_object_info(os, drrw->drr_object, NULL) != 0)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
if (dmu_bonus_hold(os, drrw->drr_object, FTAG, &bonus) != 0)
return (SET_ERROR(EINVAL));
abuf = dmu_request_arcbuf(bonus, drrw->drr_length);
data = restore_read(ra, drrw->drr_length, abuf->b_data);
if (data == NULL) {
dmu_return_arcbuf(abuf);
dmu_buf_rele(bonus, FTAG);
return (ra->err);
}
2008-11-20 20:01:55 +00:00
tx = dmu_tx_create(os);
dmu_tx_hold_write(tx, drrw->drr_object,
drrw->drr_offset, drrw->drr_length);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_return_arcbuf(abuf);
dmu_buf_rele(bonus, FTAG);
2008-11-20 20:01:55 +00:00
dmu_tx_abort(tx);
return (err);
}
if (ra->byteswap) {
dmu_object_byteswap_t byteswap =
DMU_OT_BYTESWAP(drrw->drr_type);
dmu_ot_byteswap[byteswap].ob_func(data, drrw->drr_length);
}
dmu_assign_arcbuf(bonus, drrw->drr_offset, abuf, tx);
2008-11-20 20:01:55 +00:00
dmu_tx_commit(tx);
dmu_buf_rele(bonus, FTAG);
2008-11-20 20:01:55 +00:00
return (0);
}
/*
* Handle a DRR_WRITE_BYREF record. This record is used in dedup'ed
* streams to refer to a copy of the data that is already on the
* system because it came in earlier in the stream. This function
* finds the earlier copy of the data, and uses that copy instead of
* data from the stream to fulfill this write.
*/
static int
restore_write_byref(struct restorearg *ra, objset_t *os,
struct drr_write_byref *drrwbr)
{
dmu_tx_t *tx;
int err;
guid_map_entry_t gmesrch;
guid_map_entry_t *gmep;
avl_index_t where;
objset_t *ref_os = NULL;
dmu_buf_t *dbp;
if (drrwbr->drr_offset + drrwbr->drr_length < drrwbr->drr_offset)
return (SET_ERROR(EINVAL));
/*
* If the GUID of the referenced dataset is different from the
* GUID of the target dataset, find the referenced dataset.
*/
if (drrwbr->drr_toguid != drrwbr->drr_refguid) {
gmesrch.guid = drrwbr->drr_refguid;
if ((gmep = avl_find(ra->guid_to_ds_map, &gmesrch,
&where)) == NULL) {
return (SET_ERROR(EINVAL));
}
if (dmu_objset_from_ds(gmep->gme_ds, &ref_os))
return (SET_ERROR(EINVAL));
} else {
ref_os = os;
}
err = dmu_buf_hold(ref_os, drrwbr->drr_refobject,
drrwbr->drr_refoffset, FTAG, &dbp, DMU_READ_PREFETCH);
if (err != 0)
return (err);
tx = dmu_tx_create(os);
dmu_tx_hold_write(tx, drrwbr->drr_object,
drrwbr->drr_offset, drrwbr->drr_length);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
return (err);
}
dmu_write(os, drrwbr->drr_object,
drrwbr->drr_offset, drrwbr->drr_length, dbp->db_data, tx);
dmu_buf_rele(dbp, FTAG);
dmu_tx_commit(tx);
return (0);
}
static int
restore_write_embedded(struct restorearg *ra, objset_t *os,
struct drr_write_embedded *drrwnp)
{
dmu_tx_t *tx;
int err;
void *data;
if (drrwnp->drr_offset + drrwnp->drr_length < drrwnp->drr_offset)
return (EINVAL);
if (drrwnp->drr_psize > BPE_PAYLOAD_SIZE)
return (EINVAL);
if (drrwnp->drr_etype >= NUM_BP_EMBEDDED_TYPES)
return (EINVAL);
if (drrwnp->drr_compression >= ZIO_COMPRESS_FUNCTIONS)
return (EINVAL);
data = restore_read(ra, P2ROUNDUP(drrwnp->drr_psize, 8), NULL);
if (data == NULL)
return (ra->err);
tx = dmu_tx_create(os);
dmu_tx_hold_write(tx, drrwnp->drr_object,
drrwnp->drr_offset, drrwnp->drr_length);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_tx_abort(tx);
return (err);
}
dmu_write_embedded(os, drrwnp->drr_object,
drrwnp->drr_offset, data, drrwnp->drr_etype,
drrwnp->drr_compression, drrwnp->drr_lsize, drrwnp->drr_psize,
ra->byteswap ^ ZFS_HOST_BYTEORDER, tx);
dmu_tx_commit(tx);
return (0);
}
static int
restore_spill(struct restorearg *ra, objset_t *os, struct drr_spill *drrs)
{
dmu_tx_t *tx;
void *data;
dmu_buf_t *db, *db_spill;
int err;
if (drrs->drr_length < SPA_MINBLOCKSIZE ||
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
drrs->drr_length > spa_maxblocksize(dmu_objset_spa(os)))
return (SET_ERROR(EINVAL));
data = restore_read(ra, drrs->drr_length, NULL);
if (data == NULL)
return (ra->err);
if (dmu_object_info(os, drrs->drr_object, NULL) != 0)
return (SET_ERROR(EINVAL));
VERIFY(0 == dmu_bonus_hold(os, drrs->drr_object, FTAG, &db));
if ((err = dmu_spill_hold_by_bonus(db, FTAG, &db_spill)) != 0) {
dmu_buf_rele(db, FTAG);
return (err);
}
tx = dmu_tx_create(os);
dmu_tx_hold_spill(tx, db->db_object);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err != 0) {
dmu_buf_rele(db, FTAG);
dmu_buf_rele(db_spill, FTAG);
dmu_tx_abort(tx);
return (err);
}
dmu_buf_will_dirty(db_spill, tx);
if (db_spill->db_size < drrs->drr_length)
VERIFY(0 == dbuf_spill_set_blksz(db_spill,
drrs->drr_length, tx));
bcopy(data, db_spill->db_data, drrs->drr_length);
dmu_buf_rele(db, FTAG);
dmu_buf_rele(db_spill, FTAG);
dmu_tx_commit(tx);
return (0);
}
2008-11-20 20:01:55 +00:00
/* ARGSUSED */
noinline static int
2008-11-20 20:01:55 +00:00
restore_free(struct restorearg *ra, objset_t *os,
struct drr_free *drrf)
{
int err;
if (drrf->drr_length != -1ULL &&
drrf->drr_offset + drrf->drr_length < drrf->drr_offset)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
if (dmu_object_info(os, drrf->drr_object, NULL) != 0)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
err = dmu_free_long_range(os, drrf->drr_object,
2008-11-20 20:01:55 +00:00
drrf->drr_offset, drrf->drr_length);
return (err);
}
/* used to destroy the drc_ds on error */
static void
dmu_recv_cleanup_ds(dmu_recv_cookie_t *drc)
{
char name[MAXNAMELEN];
dsl_dataset_name(drc->drc_ds, name);
dsl_dataset_disown(drc->drc_ds, dmu_recv_tag);
(void) dsl_destroy_head(name);
}
2008-11-20 20:01:55 +00:00
/*
* NB: callers *must* call dmu_recv_end() if this succeeds.
*/
int
dmu_recv_stream(dmu_recv_cookie_t *drc, vnode_t *vp, offset_t *voffp,
int cleanup_fd, uint64_t *action_handlep)
2008-11-20 20:01:55 +00:00
{
struct restorearg ra = { 0 };
dmu_replay_record_t *drr;
objset_t *os;
zio_cksum_t pcksum;
int featureflags;
2008-11-20 20:01:55 +00:00
ra.byteswap = drc->drc_byteswap;
ra.cksum = drc->drc_cksum;
2008-11-20 20:01:55 +00:00
ra.vp = vp;
ra.voff = *voffp;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
ra.bufsize = SPA_MAXBLOCKSIZE;
ra.buf = vmem_alloc(ra.bufsize, KM_SLEEP);
2008-11-20 20:01:55 +00:00
/* these were verified in dmu_recv_begin */
ASSERT3U(DMU_GET_STREAM_HDRTYPE(drc->drc_drrb->drr_versioninfo), ==,
DMU_SUBSTREAM);
ASSERT3U(drc->drc_drrb->drr_type, <, DMU_OST_NUMTYPES);
2008-11-20 20:01:55 +00:00
/*
* Open the objset we are modifying.
*/
VERIFY0(dmu_objset_from_ds(drc->drc_ds, &os));
2008-11-20 20:01:55 +00:00
ASSERT(dsl_dataset_phys(drc->drc_ds)->ds_flags & DS_FLAG_INCONSISTENT);
2008-11-20 20:01:55 +00:00
featureflags = DMU_GET_FEATUREFLAGS(drc->drc_drrb->drr_versioninfo);
/* if this stream is dedup'ed, set up the avl tree for guid mapping */
if (featureflags & DMU_BACKUP_FEATURE_DEDUP) {
minor_t minor;
if (cleanup_fd == -1) {
ra.err = SET_ERROR(EBADF);
goto out;
}
ra.err = zfs_onexit_fd_hold(cleanup_fd, &minor);
if (ra.err != 0) {
cleanup_fd = -1;
goto out;
}
if (*action_handlep == 0) {
ra.guid_to_ds_map =
kmem_alloc(sizeof (avl_tree_t), KM_SLEEP);
avl_create(ra.guid_to_ds_map, guid_compare,
sizeof (guid_map_entry_t),
offsetof(guid_map_entry_t, avlnode));
ra.err = zfs_onexit_add_cb(minor,
free_guid_map_onexit, ra.guid_to_ds_map,
action_handlep);
if (ra.err != 0)
goto out;
} else {
ra.err = zfs_onexit_cb_data(minor, *action_handlep,
(void **)&ra.guid_to_ds_map);
if (ra.err != 0)
goto out;
}
drc->drc_guid_to_ds_map = ra.guid_to_ds_map;
}
2008-11-20 20:01:55 +00:00
/*
* Read records and process them.
*/
pcksum = ra.cksum;
while (ra.err == 0 &&
NULL != (drr = restore_read(&ra, sizeof (*drr), NULL))) {
2008-11-20 20:01:55 +00:00
if (issig(JUSTLOOKING) && issig(FORREAL)) {
ra.err = SET_ERROR(EINTR);
2008-11-20 20:01:55 +00:00
goto out;
}
if (ra.byteswap)
backup_byteswap(drr);
switch (drr->drr_type) {
case DRR_OBJECT:
{
/*
* We need to make a copy of the record header,
* because restore_{object,write} may need to
* restore_read(), which will invalidate drr.
*/
struct drr_object drro = drr->drr_u.drr_object;
ra.err = restore_object(&ra, os, &drro);
break;
}
case DRR_FREEOBJECTS:
{
struct drr_freeobjects drrfo =
drr->drr_u.drr_freeobjects;
ra.err = restore_freeobjects(&ra, os, &drrfo);
break;
}
case DRR_WRITE:
{
struct drr_write drrw = drr->drr_u.drr_write;
ra.err = restore_write(&ra, os, &drrw);
break;
}
case DRR_WRITE_BYREF:
{
struct drr_write_byref drrwbr =
drr->drr_u.drr_write_byref;
ra.err = restore_write_byref(&ra, os, &drrwbr);
break;
}
case DRR_WRITE_EMBEDDED:
{
struct drr_write_embedded drrwe =
drr->drr_u.drr_write_embedded;
ra.err = restore_write_embedded(&ra, os, &drrwe);
break;
}
2008-11-20 20:01:55 +00:00
case DRR_FREE:
{
struct drr_free drrf = drr->drr_u.drr_free;
ra.err = restore_free(&ra, os, &drrf);
break;
}
case DRR_END:
{
struct drr_end drre = drr->drr_u.drr_end;
/*
* We compare against the *previous* checksum
* value, because the stored checksum is of
* everything before the DRR_END record.
*/
if (!ZIO_CHECKSUM_EQUAL(drre.drr_checksum, pcksum))
ra.err = SET_ERROR(ECKSUM);
2008-11-20 20:01:55 +00:00
goto out;
}
case DRR_SPILL:
{
struct drr_spill drrs = drr->drr_u.drr_spill;
ra.err = restore_spill(&ra, os, &drrs);
break;
}
2008-11-20 20:01:55 +00:00
default:
ra.err = SET_ERROR(EINVAL);
2008-11-20 20:01:55 +00:00
goto out;
}
pcksum = ra.cksum;
}
ASSERT(ra.err != 0);
out:
if ((featureflags & DMU_BACKUP_FEATURE_DEDUP) && (cleanup_fd != -1))
zfs_onexit_fd_rele(cleanup_fd);
2008-11-20 20:01:55 +00:00
if (ra.err != 0) {
/*
2009-08-18 18:43:27 +00:00
* destroy what we created, so we don't leave it in the
* inconsistent restoring state.
2008-11-20 20:01:55 +00:00
*/
dmu_recv_cleanup_ds(drc);
2008-11-20 20:01:55 +00:00
}
vmem_free(ra.buf, ra.bufsize);
2008-11-20 20:01:55 +00:00
*voffp = ra.voff;
return (ra.err);
}
static int
dmu_recv_end_check(void *arg, dmu_tx_t *tx)
2008-11-20 20:01:55 +00:00
{
dmu_recv_cookie_t *drc = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
int error;
ASSERT3P(drc->drc_ds->ds_owner, ==, dmu_recv_tag);
if (!drc->drc_newfs) {
dsl_dataset_t *origin_head;
error = dsl_dataset_hold(dp, drc->drc_tofs, FTAG, &origin_head);
if (error != 0)
return (error);
if (drc->drc_force) {
/*
* We will destroy any snapshots in tofs (i.e. before
* origin_head) that are after the origin (which is
* the snap before drc_ds, because drc_ds can not
* have any snaps of its own).
*/
uint64_t obj;
obj = dsl_dataset_phys(origin_head)->ds_prev_snap_obj;
while (obj !=
dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj) {
dsl_dataset_t *snap;
error = dsl_dataset_hold_obj(dp, obj, FTAG,
&snap);
if (error != 0)
break;
if (snap->ds_dir != origin_head->ds_dir)
error = SET_ERROR(EINVAL);
if (error == 0) {
error = dsl_destroy_snapshot_check_impl(
snap, B_FALSE);
}
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_dataset_rele(snap, FTAG);
if (error != 0)
break;
}
if (error != 0) {
dsl_dataset_rele(origin_head, FTAG);
return (error);
}
}
error = dsl_dataset_clone_swap_check_impl(drc->drc_ds,
origin_head, drc->drc_force, drc->drc_owner, tx);
if (error != 0) {
dsl_dataset_rele(origin_head, FTAG);
return (error);
}
error = dsl_dataset_snapshot_check_impl(origin_head,
drc->drc_tosnap, tx, B_TRUE, 1, drc->drc_cred);
dsl_dataset_rele(origin_head, FTAG);
if (error != 0)
return (error);
2008-11-20 20:01:55 +00:00
error = dsl_destroy_head_check_impl(drc->drc_ds, 1);
} else {
error = dsl_dataset_snapshot_check_impl(drc->drc_ds,
drc->drc_tosnap, tx, B_TRUE, 1, drc->drc_cred);
}
return (error);
2008-11-20 20:01:55 +00:00
}
static void
dmu_recv_end_sync(void *arg, dmu_tx_t *tx)
2008-11-20 20:01:55 +00:00
{
dmu_recv_cookie_t *drc = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
spa_history_log_internal_ds(drc->drc_ds, "finish receiving",
tx, "snap=%s", drc->drc_tosnap);
if (!drc->drc_newfs) {
dsl_dataset_t *origin_head;
VERIFY0(dsl_dataset_hold(dp, drc->drc_tofs, FTAG,
&origin_head));
if (drc->drc_force) {
/*
* Destroy any snapshots of drc_tofs (origin_head)
* after the origin (the snap before drc_ds).
*/
uint64_t obj;
obj = dsl_dataset_phys(origin_head)->ds_prev_snap_obj;
while (obj !=
dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj) {
dsl_dataset_t *snap;
VERIFY0(dsl_dataset_hold_obj(dp, obj, FTAG,
&snap));
ASSERT3P(snap->ds_dir, ==, origin_head->ds_dir);
obj = dsl_dataset_phys(snap)->ds_prev_snap_obj;
dsl_destroy_snapshot_sync_impl(snap,
B_FALSE, tx);
dsl_dataset_rele(snap, FTAG);
}
}
VERIFY3P(drc->drc_ds->ds_prev, ==,
origin_head->ds_prev);
dsl_dataset_clone_swap_sync_impl(drc->drc_ds,
origin_head, tx);
dsl_dataset_snapshot_sync_impl(origin_head,
drc->drc_tosnap, tx);
/* set snapshot's creation time and guid */
dmu_buf_will_dirty(origin_head->ds_prev->ds_dbuf, tx);
dsl_dataset_phys(origin_head->ds_prev)->ds_creation_time =
drc->drc_drrb->drr_creation_time;
dsl_dataset_phys(origin_head->ds_prev)->ds_guid =
drc->drc_drrb->drr_toguid;
dsl_dataset_phys(origin_head->ds_prev)->ds_flags &=
~DS_FLAG_INCONSISTENT;
dmu_buf_will_dirty(origin_head->ds_dbuf, tx);
dsl_dataset_phys(origin_head)->ds_flags &=
~DS_FLAG_INCONSISTENT;
dsl_dataset_rele(origin_head, FTAG);
dsl_destroy_head_sync_impl(drc->drc_ds, tx);
if (drc->drc_owner != NULL)
VERIFY3P(origin_head->ds_owner, ==, drc->drc_owner);
} else {
dsl_dataset_t *ds = drc->drc_ds;
2008-11-20 20:01:55 +00:00
dsl_dataset_snapshot_sync_impl(ds, drc->drc_tosnap, tx);
2008-11-20 20:01:55 +00:00
/* set snapshot's creation time and guid */
dmu_buf_will_dirty(ds->ds_prev->ds_dbuf, tx);
dsl_dataset_phys(ds->ds_prev)->ds_creation_time =
drc->drc_drrb->drr_creation_time;
dsl_dataset_phys(ds->ds_prev)->ds_guid =
drc->drc_drrb->drr_toguid;
dsl_dataset_phys(ds->ds_prev)->ds_flags &=
~DS_FLAG_INCONSISTENT;
2008-11-20 20:01:55 +00:00
dmu_buf_will_dirty(ds->ds_dbuf, tx);
dsl_dataset_phys(ds)->ds_flags &= ~DS_FLAG_INCONSISTENT;
}
drc->drc_newsnapobj = dsl_dataset_phys(drc->drc_ds)->ds_prev_snap_obj;
/*
* Release the hold from dmu_recv_begin. This must be done before
* we return to open context, so that when we free the dataset's dnode,
* we can evict its bonus buffer.
*/
dsl_dataset_disown(drc->drc_ds, dmu_recv_tag);
drc->drc_ds = NULL;
2008-11-20 20:01:55 +00:00
}
static int
add_ds_to_guidmap(const char *name, avl_tree_t *guid_map, uint64_t snapobj)
{
dsl_pool_t *dp;
dsl_dataset_t *snapds;
guid_map_entry_t *gmep;
int err;
ASSERT(guid_map != NULL);
err = dsl_pool_hold(name, FTAG, &dp);
if (err != 0)
return (err);
gmep = kmem_alloc(sizeof (*gmep), KM_SLEEP);
err = dsl_dataset_hold_obj(dp, snapobj, gmep, &snapds);
if (err == 0) {
gmep->guid = dsl_dataset_phys(snapds)->ds_guid;
gmep->gme_ds = snapds;
avl_add(guid_map, gmep);
dsl_dataset_long_hold(snapds, gmep);
} else {
kmem_free(gmep, sizeof (*gmep));
}
dsl_pool_rele(dp, FTAG);
return (err);
}
static int dmu_recv_end_modified_blocks = 3;
static int
dmu_recv_existing_end(dmu_recv_cookie_t *drc)
2008-11-20 20:01:55 +00:00
{
int error;
2008-11-20 20:01:55 +00:00
#ifdef _KERNEL
char *name;
2008-11-20 20:01:55 +00:00
/*
* We will be destroying the ds; make sure its origin is unmounted if
* necessary.
*/
name = kmem_alloc(MAXNAMELEN, KM_SLEEP);
dsl_dataset_name(drc->drc_ds, name);
zfs_destroy_unmount_origin(name);
kmem_free(name, MAXNAMELEN);
#endif
2008-11-20 20:01:55 +00:00
error = dsl_sync_task(drc->drc_tofs,
dmu_recv_end_check, dmu_recv_end_sync, drc,
dmu_recv_end_modified_blocks, ZFS_SPACE_CHECK_NORMAL);
if (error != 0)
dmu_recv_cleanup_ds(drc);
return (error);
2008-11-20 20:01:55 +00:00
}
static int
dmu_recv_new_end(dmu_recv_cookie_t *drc)
{
int error;
error = dsl_sync_task(drc->drc_tofs,
dmu_recv_end_check, dmu_recv_end_sync, drc,
dmu_recv_end_modified_blocks, ZFS_SPACE_CHECK_NORMAL);
if (error != 0) {
dmu_recv_cleanup_ds(drc);
} else if (drc->drc_guid_to_ds_map != NULL) {
(void) add_ds_to_guidmap(drc->drc_tofs,
drc->drc_guid_to_ds_map,
drc->drc_newsnapobj);
}
return (error);
}
int
dmu_recv_end(dmu_recv_cookie_t *drc, void *owner)
{
drc->drc_owner = owner;
if (drc->drc_newfs)
return (dmu_recv_new_end(drc));
else
return (dmu_recv_existing_end(drc));
}
/*
* Return TRUE if this objset is currently being received into.
*/
boolean_t
dmu_objset_is_receiving(objset_t *os)
{
return (os->os_dsl_dataset != NULL &&
os->os_dsl_dataset->ds_owner == dmu_recv_tag);
}
#if defined(_KERNEL)
module_param(zfs_send_corrupt_data, int, 0644);
MODULE_PARM_DESC(zfs_send_corrupt_data, "Allow sending corrupt data");
#endif