d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
972f13bc95
freebsd-nq/share/man/man4/wi.4

361 lines
12 KiB
Groff
Raw Normal View History

Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.\" Copyright (c) 1997, 1998, 1999
.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by Bill Paul.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
$Id$ -> $FreeBSD$
1999-08-28 00:22:10 +00:00
.\" $FreeBSD$
Additional patches from OpenBSD. Mostly grammar fixes and the like, however I'm adding the Dlink DWL520 as supported from OpenBSD. Also adding Dlink DWL650 since I have one in my hot little hands and it works great. # I suspect that OpenBSD needs this too :-)
2002-05-03 05:39:16 +00:00
.\" $OpenBSD: wi.4tbl,v 1.14 2002/04/29 19:53:50 jsyn Exp $
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.\"
Add US Robotics Wireless Card 2410 Also add a snarky note about telling me about changes to this file so I can keep OpenBSD and FreeBSD's copy of this man page more or less in sync.
2002-06-14 06:56:03 +00:00
.\" DO NOT MAKE CHANGES TO THIS FILE WITHOUT AT LEAST SENDING DIRECT
.\" MAIL TO imp@village.org AS HE IS TRYING TO KEEP THIS FILE IN SYNC
.\" WITH OPENBSD.
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
.Dd July 30, 2002
Remove the MD part from the document title. Forgotten by: obrien
2001-02-20 11:07:27 +00:00
.Dt WI 4
mdoc(7) police: removed HISTORY info from the .Os call.
2001-07-10 15:31:11 +00:00
.Os
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Sh NAME
.Nm wi
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Nd "WaveLAN/IEEE, PRISM-II and Spectrum24 802.11DS wireless network driver"
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Sh SYNOPSIS
Third round of config related changes to the manpages. device blah0 -> device blah for PCI devices and busses.
2000-01-23 17:00:18 +00:00
.Cd "device wi"
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Sh DESCRIPTION
The
.Nm
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
driver provides support for wireless network adapters based around
the Lucent Hermes, Intersil PRISM-II, Intersil PRISM-2.5, and Symbol
Spectrum24 chipsets.
All four chipsets provide a similar interface to the driver.
.Pp
All host/device interaction is via programmed I/O.
Supported features include 802.11 and 802.3 frames, power management, BSS,
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
IBSS, WDS and old-style Lucent ad-hoc operation modes.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
Cards based on the Intersil PRISM-II and PRISM-2.5 chips also support a
host-based access point mode which allows a card to act as a normal access
point (with some assistance from the
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Nm
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
driver).
The Lucent Hermes and Symbol Spectrum24 chipsets do not contain this
functionality.
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
PRISM-II and PRISM-2.5 chips do not support the WDS functionality.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Remove more single-space hard sentence breaks.
2000-03-02 14:54:02 +00:00
The
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Nm
driver encapsulates all IP and ARP traffic as 802.11 frames, however
Remove more single-space hard sentence breaks.
2000-03-02 14:54:02 +00:00
it can receive either 802.11 or 802.3 frames.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
Transmit speed is selectable between 1Mbps fixed, 2Mbps fixed, 2Mbps
with auto fallback, 5.5Mbps, 8Mbps, or 11Mbps depending on your hardware.
The Lucent WaveLAN/IEEE Silver and Gold cards as well as the Intersil
and Symbol cards have support for WEP encryption.
The WaveLAN Gold as well as newer Intersil and Symbol cards support
104bit keys, the others only accept 40bit keys.
The Lucent WaveLAN/IEEE Bronze cards do not support WEP at all.
To enable encryption, use the
.Xr wicontrol 8
Additional patches from OpenBSD. Mostly grammar fixes and the like, however I'm adding the Dlink DWL520 as supported from OpenBSD. Also adding Dlink DWL650 since I have one in my hot little hands and it works great. # I suspect that OpenBSD needs this too :-)
2002-05-03 05:39:16 +00:00
utility to set your keys, or use
.Xr ifconfig 8
as shown below.
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Pp
By default, the
.Nm
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
driver configures the card for BSS operation (aka infrastructure
mode).
This mode requires the use of an access point (base station).
.Pp
The
.Nm
Fix a grammar bogon. PR: 44883 Submitted by: Christian Brueffer <chris@unixpages.org>
2002-11-04 19:18:57 +00:00
driver also supports a point-to-point mode where the ssid is
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
ignored and stations can communicate amongst themselves without the
aid of an access point.
Note that there are two possible point-to-point modes.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
One mode, referred to as
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq "ad-hoc demo mode" ,
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
or
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq "legacy Lucent ad-hoc mode" ,
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
predates the IEEE 802.11 specification and so may not interoperate
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
with cards from different vendors.
The standardized point-to-point mode, is called IBSS (or confusingly
just ad-hoc mode), but is not supported by cards with very old
firmware revisions.
If your cards supports IBSS mode, it is recommended that you use it in
preference to the
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq "ad-hoc demo mode"
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
in new installations.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Cards based on the Intersil PRISM-II and PRISM-2.5 chips also
have a host-based access point mode which allows the card to
act as an access point (base station).
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
Access points are different than operating in IBSS mode.
They operate in BSS mode.
They allow for easier roaming and bridge all ethernet traffic such
that machines connected via an access point appear to be on the local
ethernet segment.
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Pp
For more information on configuring this device, see
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Xr ifconfig 8 .
.Pp
Cards supported by the
.Nm
driver come in a variety of packages, though the most common
are of the PCMCIA type.
In many cases, the PCI version of a wireless card is simply
a PCMCIA card bundled with a PCI adapter.
The PCI adapters come in two flavors: true PCMCIA bridges and
dumb PCMCIA bridges.
A true PCMCIA bridge (such as those sold by Lucent) will attach
as a real PCMCIA controller.
The wireless card will then attach to the PCMCIA bus.
Wireless cards in PCMCIA slots may be inserted and ejected on the fly.
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Pp
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
A dumb bridge, on the other hand, does not show up as a true PCMCIA bus.
The wireless card will simply appear to the host as a normal PCI
device and will not require any PCMCIA support.
Cards in this type of adapter should only be removed when the
machine is powered down.
.Pp
Additional patches from OpenBSD. Mostly grammar fixes and the like, however I'm adding the Dlink DWL520 as supported from OpenBSD. Also adding Dlink DWL650 since I have one in my hot little hands and it works great. # I suspect that OpenBSD needs this too :-)
2002-05-03 05:39:16 +00:00
The following cards are among those supported by the
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Nm
driver:
.Pp
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bl -column -compact "Linksys Instant Wireless WPC11 2.5" "Spectrum24" "PCI or PCMCIA"
.Em "Card Chip Bus"
3Com AirConnect 3CRWE737A Spectrum24 PCMCIA
3Com AirConnect 3CRWE777A Prism-II PCI
ACTIONTEC HWC01170 Prism-2.5 PCMCIA
Addtron AWP-100 Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Adtec Adlink/340C Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Agere Orinoco Hermes PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Avaya Wireless Prism-II PCMCIA
Blue Concentric Circle WL-379F PRISM-II CF
BreezeNet Wireless Prism-II PCMCIA
Buffalo WLI-PCM-S11 Prism-II PCMCIA
Buffalo WLI-PCM-L11G Hermes PCMCIA
Buffalo WLI-CF-S11G Prism-II CF
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Cabletron RoamAbout Hermes PCMCIA
Compaq Agency NC5004 Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Compaq WL100 Prism-II PCMCIA
Compaq WL110 Prism-II PCMCIA
Compaq WL200 Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Contec FLEXLAN/FX-DS110-PCC Prism-II PCMCIA
Corega PCC-11 Prism-II PCMCIA
Corega PCCA-11 Prism-II PCMCIA
Corega PCCB-11 Prism-II PCMCIA
Corega CGWLPCIA11 Prism-II PCI
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Dell TrueMobile 1150 Hermes PCMCIA
Note that the Dlink Air 660 is supported.
2003-01-14 01:14:08 +00:00
Dlink Air 660 Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Dlink DWL520 Prism-2.5 PCI
Dlink DWL650 Prism-2.5 PCMCIA
ELSA XI300 Prism-II PCMCIA
ELSA XI800 Prism-II CF
EMTAC A2424i Prism-II PCMCIA
Ericsson Wireless LAN CARD C11 Spectrum24 PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Farallon Skyline Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Gemtek WL-311 Prism-2.5 PCMCIA
Hawking Technology WE110P Prism-2.5 PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Home Wireless Networks Prism-II PCMCIA
IBM High Rate Wireless Hermes PCMCIA
ICOM SL-1100 Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
I-O DATA WN-B11/PCM Prism-II PCMCIA
Intel PRO/Wireless 2011 Spectrum24 PCMCIA
Intersil Prism II Prism-II PCMCIA
Intersil Mini-PCI Prism-2.5 PCI
Linksys Instant Wireless WPC11 Prism-II PCMCIA
Linksys Instant Wireless WPC11 2.5 Prism-2.5 PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Linksys Instant Wireless WPC11 3.0 Prism-3 PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Lucent WaveLAN Hermes PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Melco Airconnect Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
NANOSPEED ROOT-RZ2000 Prism-II PCMCIA
NDC/Sohoware NCP130 Prism-II PCI
NEC CMZ-RT-WP Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
NEC PK-WL001 Prism-II PCMCIA
NEC PC-WL/11C PRISM-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Netgear MA401 Prism-II PCMCIA
NTT-ME 11Mbps Wireless LAN Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Planex GeoWave/GW-NS110 Prism-II PCMCIA
Planex GW-NS11H Prism-II PCMCIA
Proxim Harmony Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Proxim RangeLAN-DS Prism-II PCMCIA
Samsung MagicLAN SWL-2000N Prism-II PCMCIA
SMC 2602 EZ Connect (3.3V) Prism-II PCI or PCMCIA
SMC 2632 EZ Connect Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Socket Low Power WLAN-CF Prism-II CF
Sony PCWA-C100 Lucent PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
Symbol Spectrum24 Spectrum24 PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Symbol LA-4100 Spectrum24 CF
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
TDK LAK-CD011WL Prism-II PCMCIA
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
Toshiba Wireless LAN Card Prism-II PCMCIA
Add US Robotics Wireless Card 2410 Also add a snarky note about telling me about changes to this file so I can keep OpenBSD and FreeBSD's copy of this man page more or less in sync.
2002-06-14 06:56:03 +00:00
U.S. Robotics Wireless Card 2410 Prism-II PCMCIA
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.El
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Several vendors sell PCI adapters built around the PLX Technology 9050
or 9052 chip.
The following such adapters are supported or expected to work:
.Pp
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bl -tag -compact
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.It 3Com AirConnect 3CRWE777A (3.3V)
.It Belkin F5D6000 (a rebadged WL11000P)
.It Eumitcom WL11000P
.It Global Sun Technology GL24110P (untested)
.It Global Sun Technology GL24110P02
.It LinkSys WDT11 (a rebadged GL24110P02)
.It Netgear MA301
.It US Robotics 2415 (rebadged WL11000P)
.El
.Sh EXAMPLES
The following examples utilize
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Xr ifconfig 8
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
for simplicity, however,
.Xr wicontrol 8
can also be used to set wireless parameters.
.Pp
Join an existing BSS network (ie: connect to an access point):
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Pp
.Dl "ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00"
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Join a specific BSS network with network name
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq Li my_net :
.Pp
.Dl "ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Join a specific BSS network with WEP encryption:
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
'wepmode on' is needed to turn on wep. Submitted by: blackend
2003-01-01 02:53:41 +00:00
wepmode on wepkey 0x8736639624
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Ed
.Pp
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
Join a Lucent legacy demo ad-hoc network with network name
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq Li my_net :
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
mediaopt adhoc
.Ed
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
.Pp
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
Create an IBSS network with network name
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq Li my_net :
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
mediaopt ibss-master
.Ed
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Pp
.Em Note :
The infrastructure for
.Cm mediaopt ibss-master
has not been committed yet.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Try to de-confuse ad-hoc, demo ad-hoc and ibss: o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this theme. o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where appropriate. o Fix type IBBS -> IBSS
2002-05-04 04:59:20 +00:00
Join an IBSS network with network name
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Dq Li my_net :
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.22 netmask 0xffffff00 ssid my_net \e
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
mediaopt ibss
.Ed
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Pp
.Em Note :
The infrastructure for
.Cm mediaopt ibss
has not been committed yet.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Pp
Create a host-based access point (Prism only):
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
mediaopt hostap
.Ed
.Pp
Create a host-based access point with WEP enabled (Prism only):
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bd -literal -offset indent
ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
'wepmode on' is needed to turn on wep. Submitted by: blackend
2003-01-01 02:53:41 +00:00
wepmode on wepkey 0x1234567890 mediaopt hostap
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Ed
.Pp
Create a host-based wireless bridge to fxp0 (Prism only):
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Bd -literal -offset indent
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
Add BRIDGE to the kernel config.
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
ifconfig wi0 inet up ssid my_ap mediaopt hostap
sysctl net.link.ether.bridge=1
sysctl net.link.ether.bridge_cfg="wi0 fxp0"
sysctl net.inet.ip.forwarding=1
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Ed
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
.Pp
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
This will give you approximately the same functionality as an access
point.
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Sh DIAGNOSTICS
.Bl -diag
.It "wi%d: init failed"
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
The WaveLAN card failed to come ready after an initialization command
was issued.
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.It "wi%d: failed to allocate %d bytes on NIC"
The driver was unable to allocate memory for transmit frames in the
NIC's on-board RAM.
Correct typo ("wd" -> "wi").
2000-03-03 06:58:30 +00:00
.It "wi%d: device timeout"
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
The WaveLAN failed to generate an interrupt to acknowledge a transmit
command.
.El
.Sh SEE ALSO
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
.Xr an 4 ,
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Xr arp 4 ,
Removed whitespace at end-of-line; no content changes. I simply did cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//' BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block... Reviewed by: Silence from cvs diff -b MFC after: 7 days
2001-07-14 19:41:16 +00:00
.Xr netintro 4 ,
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
.Xr ifconfig 8 ,
.Xr wicontrol 8
.Rs
.%T HCF Light programming specification
.%O http://www.wavelan.com
.Re
.Sh HISTORY
The
.Nm
device driver first appeared in
.Fx 3.0 .
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net>
1999-08-15 10:48:36 +00:00
.Sh AUTHORS
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
The
.Nm
mdoc(7) police: Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
2002-05-30 10:33:19 +00:00
driver was written by
.An Bill Paul Aq wpaul@ctr.columbia.edu .
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
This man page comes from
.Ox .
.Sh CAVEATS
The original Lucent WaveLAN cards usually default to channel 3;
newer cards use channel 10 by default.
Non-Lucent cards vary, for instance the Addtron cards use channel
11 by default.
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
Different regulatory domains have different default channels.
Bring the wi man page into the 21st centry. This man page is based heavily on OpenBSD's wi man page, with OpenBSDisms replaced by FreeBSDisms. I also added a note about where the man page came from. I hope that I've not broken anything that ru cleaned up. We now run this through tbl, but that appears to be automatic. Obtained From: OpenBSD
2002-05-02 22:51:40 +00:00
See
.Xr wicontrol 8
for information on how to change the channel.
.Pp
IBSS creation does not currently work with Symbol cards.
.Pp
Prism2 host-based access point mode has bugs for firmware versions
prior to 0.8.3.
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
.Pp
mdoc(7) police: minor nits. Approved by: imp
2002-08-13 19:43:47 +00:00
Lucent cards prior to firmware version 6.0.4 do not support IBSS
Minor tweaks: o go ahead and document ibss-master and ibss modes, since there are patches in the pipeline to support them. o Note that they aren't implemented yet. o Note that different regulatory domains have different default channels. o Note that Lucent cards prior to firmware 6.0.4 do not support ibss mode, and only support the older demo ad-hoc mode. o Note that PRISM2 chipsets do not support WDS mode of operation (the mysterious -p 2 option).
2002-05-03 18:11:17 +00:00
mode.
Add a bunch more cards that are known to work. Add a warning about the Symbol LA-4100 series of cards. You gotta load special firmware, and the wi driver in the tree doesn't support that yet.
2002-07-30 06:58:27 +00:00
.Pp
Symbol LA-4100 series CF cards need firmware downloaded into their RAM
before they will function.
mdoc(7) police: minor nits. Approved by: imp
2002-08-13 19:43:47 +00:00
This functionality is not presently in
.Fx Ns 's
.Nm
driver.
Reference in New Issue Copy Permalink