freebsd-nq/sys/arm/sa11x0/assabet_machdep.c

431 lines
14 KiB
C
Raw Normal View History

/* $NetBSD: hpc_machdep.c,v 1.70 2003/09/16 08:18:22 agc Exp $ */
/*
* Copyright (c) 1994-1998 Mark Brinicombe.
* Copyright (c) 1994 Brini.
* All rights reserved.
*
* This code is derived from software written for Brini by Mark Brinicombe
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Brini.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* RiscBSD kernel project
*
* machdep.c
*
* Machine dependant functions for kernel setup
*
* This file needs a lot of work.
*
* Created : 17/09/94
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_md.h"
#define _ARM32_BUS_DMA_PRIVATE
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysproto.h>
#include <sys/signalvar.h>
#include <sys/imgact.h>
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/linker.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/pcpu.h>
#include <sys/proc.h>
#include <sys/ptrace.h>
#include <sys/cons.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/buf.h>
#include <sys/exec.h>
#include <sys/kdb.h>
#include <machine/reg.h>
#include <machine/cpu.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <vm/vm_map.h>
#include <vm/vnode_pager.h>
#include <machine/pmap.h>
#include <machine/vmparam.h>
#include <machine/pcb.h>
#include <machine/undefined.h>
#include <machine/machdep.h>
#include <machine/metadata.h>
#include <machine/armreg.h>
#include <machine/bus.h>
#include <sys/reboot.h>
#define MDROOT_ADDR 0xd0400000
#define KERNEL_PT_VMEM 0 /* Page table for mapping video memory */
#define KERNEL_PT_SYS 0 /* Page table for mapping proc0 zero page */
#define KERNEL_PT_IO 3 /* Page table for mapping IO */
#define KERNEL_PT_IRQ 2 /* Page table for mapping irq handler */
#define KERNEL_PT_KERNEL 1 /* Page table for mapping kernel */
#define KERNEL_PT_L1 4 /* Page table for mapping l1pt */
#define KERNEL_PT_VMDATA 5 /* Page tables for mapping kernel VM */
#define KERNEL_PT_VMDATA_NUM 4 /* start with 16MB of KVM */
#define NUM_KERNEL_PTS (KERNEL_PT_VMDATA + KERNEL_PT_VMDATA_NUM)
/* Define various stack sizes in pages */
#define IRQ_STACK_SIZE 1
#define ABT_STACK_SIZE 1
#ifdef IPKDB
#define UND_STACK_SIZE 2
#else
#define UND_STACK_SIZE 1
#endif
#define KERNEL_VM_BASE (KERNBASE + 0x00c00000)
#define KERNEL_VM_SIZE 0x05000000
extern u_int data_abort_handler_address;
extern u_int prefetch_abort_handler_address;
extern u_int undefined_handler_address;
struct pv_addr kernel_pt_table[NUM_KERNEL_PTS];
extern void *_end;
int got_mmu = 0;
extern vm_offset_t sa1_cache_clean_addr;
extern int *end;
struct pcpu __pcpu;
struct pcpu *pcpup = &__pcpu;
#ifndef MD_ROOT_SIZE
#error SIMICS needs MD_ROOT and MD_ROOT_SIZE
#endif
/* Physical and virtual addresses for some global pages */
vm_paddr_t phys_avail[10];
vm_paddr_t physical_start;
vm_paddr_t physical_end;
vm_paddr_t physical_freestart;
vm_offset_t physical_pages;
vm_offset_t clean_sva, clean_eva;
struct pv_addr systempage;
struct pv_addr irqstack;
struct pv_addr undstack;
struct pv_addr abtstack;
struct pv_addr kernelstack;
void enable_mmu(vm_offset_t);
static struct trapframe proc0_tf;
struct arm32_dma_range *
bus_dma_get_range(void)
{
return (NULL);
}
int
bus_dma_get_range_nb(void)
{
return (0);
}
void
cpu_reset()
{
cpu_halt();
while (1);
}
#define CPU_SA110_CACHE_CLEAN_SIZE (0x4000 * 2)
void *
initarm(void *arg, void *arg2)
{
struct pcpu *pc;
struct pv_addr kernel_l1pt;
struct pv_addr proc0_uarea;
struct pv_addr md_addr;
struct pv_addr md_bla;
int loop;
u_int kerneldatasize, symbolsize;
u_int l1pagetable;
vm_offset_t freemempos;
vm_offset_t lastalloced;
vm_size_t pt_size;
int i = 0;
uint32_t fake_preload[35];
boothowto = RB_VERBOSE | RB_SINGLE;
cninit();
set_cpufuncs();
fake_preload[i++] = MODINFO_NAME;
fake_preload[i++] = strlen("elf kernel") + 1;
strcpy((char*)&fake_preload[i++], "elf kernel");
i += 2;
fake_preload[i++] = MODINFO_TYPE;
fake_preload[i++] = strlen("elf kernel") + 1;
strcpy((char*)&fake_preload[i++], "elf kernel");
i += 2;
fake_preload[i++] = MODINFO_ADDR;
fake_preload[i++] = sizeof(vm_offset_t);
fake_preload[i++] = KERNBASE;
fake_preload[i++] = MODINFO_SIZE;
fake_preload[i++] = sizeof(uint32_t);
fake_preload[i++] = (uint32_t)&end - KERNBASE;
fake_preload[i++] = MODINFO_NAME;
fake_preload[i++] = strlen("md root") + 1;
strcpy((char*)&fake_preload[i++], "md root");
i += 1;
fake_preload[i++] = MODINFO_TYPE;
fake_preload[i++] = strlen("md_image") + 1;
strcpy((char*)&fake_preload[i++], "md_image");
i += 2;
fake_preload[i++] = MODINFO_ADDR;
fake_preload[i++] = sizeof(uint32_t);
fake_preload[i++] = MDROOT_ADDR;
fake_preload[i++] = MODINFO_SIZE;
fake_preload[i++] = sizeof(uint32_t);
fake_preload[i++] = MD_ROOT_SIZE * 1024;
fake_preload[i++] = 0;
fake_preload[i] = 0;
preload_metadata = (void *)fake_preload;
physmem =( 16 * 1024 * 1024) / PAGE_SIZE;
pc = &__pcpu;
pcpu_init(pc, 0, sizeof(struct pcpu));
PCPU_SET(curthread, &thread0);
physical_start = (vm_offset_t) KERNBASE;
physical_end = (vm_offset_t) &end;
physical_freestart = (((vm_offset_t)physical_end) + PAGE_MASK) & ~PAGE_MASK;
md_addr.pv_va = md_addr.pv_pa = MDROOT_ADDR;
#define KERNEL_TEXT_BASE (KERNBASE + 0x00040000)
kerneldatasize = (u_int32_t)&end - (u_int32_t)KERNEL_TEXT_BASE;
symbolsize = 0;
freemempos = (vm_offset_t)round_page(physical_freestart);
memset((void *)freemempos, 0, 256*1024);
/* Define a macro to simplify memory allocation */
#define valloc_pages(var, np) \
alloc_pages((var).pv_pa, (np)); \
(var).pv_va = (var).pv_pa;
#define alloc_pages(var, np) \
(var) = freemempos; \
freemempos += ((np) * PAGE_SIZE);\
memset((char *)(var), 0, ((np) * PAGE_SIZE));
while ((freemempos & (L1_TABLE_SIZE - 1)) != 0)
freemempos += PAGE_SIZE;
valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
valloc_pages(md_bla, L2_TABLE_SIZE / PAGE_SIZE);
alloc_pages(sa1_cache_clean_addr, CPU_SA110_CACHE_CLEAN_SIZE / PAGE_SIZE);
for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
valloc_pages(kernel_pt_table[loop],
L2_TABLE_SIZE / PAGE_SIZE);
}
valloc_pages(systempage, 1);
/*
* Allocate a page for the system page mapped to V0x00000000
* This page will just contain the system vectors and can be
* shared by all processes.
*/
pt_size = round_page(freemempos) - physical_freestart;
/* Allocate stacks for all modes */
valloc_pages(irqstack, IRQ_STACK_SIZE);
valloc_pages(abtstack, ABT_STACK_SIZE);
valloc_pages(undstack, UND_STACK_SIZE);
valloc_pages(kernelstack, KSTACK_PAGES);
/*
* Allocate memory for the l1 and l2 page tables. The scheme to avoid
* wasting memory by allocating the l1pt on the first 16k memory was
* taken from NetBSD rpc_machdep.c. NKPT should be greater than 12 for
* this to work (which is supposed to be the case).
*/
/* Allocate pages for process 0 kernel stack and uarea */
valloc_pages(proc0_uarea, UAREA_PAGES);
lastalloced = proc0_uarea.pv_va;
/*
* Now we start construction of the L1 page table
* We start by mapping the L2 page tables into the L1.
* This means that we can replace L1 mappings later on if necessary
*/
l1pagetable = kernel_l1pt.pv_pa;
/* Map the L2 pages tables in the L1 page table */
pmap_link_l2pt(l1pagetable, 0x00000000,
&kernel_pt_table[KERNEL_PT_SYS]);
pmap_link_l2pt(l1pagetable, KERNBASE,
&kernel_pt_table[KERNEL_PT_KERNEL]);
pmap_link_l2pt(l1pagetable, 0xd0000000,
&kernel_pt_table[KERNEL_PT_IO]);
pmap_link_l2pt(l1pagetable, lastalloced & ~((L1_S_SIZE * 4) - 1),
&kernel_pt_table[KERNEL_PT_L1]);
pmap_link_l2pt(l1pagetable, 0x90000000, &kernel_pt_table[KERNEL_PT_IRQ]);
pmap_link_l2pt(l1pagetable, MDROOT_ADDR,
&md_bla);
for (loop = 0; loop < KERNEL_PT_VMDATA_NUM; ++loop)
pmap_link_l2pt(l1pagetable, KERNEL_VM_BASE + loop * 0x00400000,
&kernel_pt_table[KERNEL_PT_VMDATA + loop]);
pmap_map_chunk(l1pagetable, KERNBASE, KERNBASE,
(uint32_t)&end - KERNBASE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
/* Map the stack pages */
pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, md_addr.pv_va, md_addr.pv_pa,
MD_ROOT_SIZE * 1024, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
KSTACK_PAGES * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, proc0_uarea.pv_va, proc0_uarea.pv_pa,
UAREA_PAGES * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
L1_TABLE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
pmap_map_chunk(l1pagetable, kernel_pt_table[loop].pv_va,
kernel_pt_table[loop].pv_pa, L2_TABLE_SIZE,
VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
}
pmap_map_chunk(l1pagetable, md_bla.pv_va, md_bla.pv_pa, L2_TABLE_SIZE,
VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
/* Map the vector page. */
pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
/* Map SACOM3. */
pmap_map_entry(l1pagetable, 0xd000d000, 0x80010000,
VM_PROT_READ|VM_PROT_WRITE, PTE_NOCACHE);
pmap_map_entry(l1pagetable, 0x90050000, 0x90050000,
VM_PROT_READ|VM_PROT_WRITE, PTE_NOCACHE);
pmap_map_chunk(l1pagetable, sa1_cache_clean_addr, 0xf0000000,
CPU_SA110_CACHE_CLEAN_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
data_abort_handler_address = (u_int)data_abort_handler;
prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
undefined_handler_address = (u_int)undefinedinstruction_bounce;
undefined_init();
cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
setttb(kernel_l1pt.pv_pa);
cpu_tlb_flushID();
cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));
2004-06-17 17:52:12 +00:00
/*
* Pages were allocated during the secondary bootstrap for the
* stacks for different CPU modes.
* We must now set the r13 registers in the different CPU modes to
* point to these stacks.
* Since the ARM stacks use STMFD etc. we must set r13 to the top end
* of the stack memory.
*/
set_stackptr(PSR_IRQ32_MODE,
irqstack.pv_va + IRQ_STACK_SIZE * PAGE_SIZE);
set_stackptr(PSR_ABT32_MODE,
abtstack.pv_va + ABT_STACK_SIZE * PAGE_SIZE);
set_stackptr(PSR_UND32_MODE,
undstack.pv_va + UND_STACK_SIZE * PAGE_SIZE);
/*
* We must now clean the cache again....
* Cleaning may be done by reading new data to displace any
* dirty data in the cache. This will have happened in setttb()
* but since we are boot strapping the addresses used for the read
* may have just been remapped and thus the cache could be out
* of sync. A re-clean after the switch will cure this.
* After booting there are no gross reloations of the kernel thus
* this problem will not occur after initarm().
*/
/* cpu_idcache_wbinv_all();*/
bootverbose = 1;
/* Set stack for exception handlers */
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
proc_linkup(&proc0, &ksegrp0, &thread0);
proc0.p_uarea = (struct user *) proc0_uarea.pv_va;
thread0.td_kstack = kernelstack.pv_va;
thread0.td_pcb = (struct pcb *)
(thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1;
thread0.td_pcb->pcb_flags = 0;
thread0.td_frame = &proc0_tf;
/* Enable MMU, I-cache, D-cache, write buffer. */
cpufunc_control(0x337f, 0x107d);
got_mmu = 1;
arm_vector_init(ARM_VECTORS_LOW, ARM_VEC_ALL);
pmap_curmaxkvaddr = freemempos + KERNEL_PT_VMDATA_NUM * 0x400000;
pmap_bootstrap(KERNEL_VM_BASE,
0xd0000000, &kernel_l1pt);
mutex_init();
phys_avail[0] = round_page(freemempos);
phys_avail[1] = 0xc0000000 + 0x02000000 - 1;
phys_avail[2] = 0;
phys_avail[3] = 0;
/* Do basic tuning, hz etc */
init_param1();
init_param2(physmem);
kdb_init();
avail_end = 0xc0000000 + 0x02000000 - 1;
return ((void *)(kernelstack.pv_va + USPACE_SVC_STACK_TOP));
}