1999-08-28 01:08:13 +00:00
|
|
|
/* $FreeBSD$ */
|
1998-04-22 18:12:29 +00:00
|
|
|
/*
|
|
|
|
* PCI specific probe and attach routines for Qlogic ISP SCSI adapters.
|
|
|
|
* FreeBSD Version.
|
|
|
|
*
|
|
|
|
*---------------------------------------
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
* Copyright (c) 1997, 1998, 1999 by Matthew Jacob
|
1998-04-22 18:12:29 +00:00
|
|
|
* NASA/Ames Research Center
|
|
|
|
* All rights reserved.
|
|
|
|
*---------------------------------------
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice immediately at the beginning of the file, without modification,
|
|
|
|
* this list of conditions, and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
1998-09-15 10:06:23 +00:00
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/module.h>
|
|
|
|
#include <sys/bus.h>
|
1998-04-22 18:12:29 +00:00
|
|
|
|
|
|
|
#include <pci/pcireg.h>
|
|
|
|
#include <pci/pcivar.h>
|
|
|
|
|
1998-09-15 10:06:23 +00:00
|
|
|
#include <machine/bus_memio.h>
|
|
|
|
#include <machine/bus_pio.h>
|
|
|
|
#include <machine/bus.h>
|
2000-02-11 19:45:17 +00:00
|
|
|
#include <machine/resource.h>
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
|
|
|
|
#include <dev/isp/isp_freebsd.h>
|
|
|
|
#include <dev/isp/asm_pci.h>
|
1999-03-17 05:07:18 +00:00
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
static u_int16_t isp_pci_rd_reg __P((struct ispsoftc *, int));
|
|
|
|
static void isp_pci_wr_reg __P((struct ispsoftc *, int, u_int16_t));
|
2000-02-29 05:48:46 +00:00
|
|
|
#if !defined(ISP_DISABLE_1080_SUPPORT) || !defined(ISP_DISABLE_12160_SUPPORT)
|
1999-03-17 05:07:18 +00:00
|
|
|
static u_int16_t isp_pci_rd_reg_1080 __P((struct ispsoftc *, int));
|
|
|
|
static void isp_pci_wr_reg_1080 __P((struct ispsoftc *, int, u_int16_t));
|
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
static int isp_pci_mbxdma __P((struct ispsoftc *));
|
|
|
|
static int isp_pci_dmasetup __P((struct ispsoftc *, ISP_SCSI_XFER_T *,
|
1999-11-21 02:56:17 +00:00
|
|
|
ispreq_t *, u_int16_t *, u_int16_t));
|
1998-09-15 10:06:23 +00:00
|
|
|
static void
|
|
|
|
isp_pci_dmateardown __P((struct ispsoftc *, ISP_SCSI_XFER_T *, u_int32_t));
|
1998-04-22 18:12:29 +00:00
|
|
|
|
|
|
|
static void isp_pci_reset1 __P((struct ispsoftc *));
|
|
|
|
static void isp_pci_dumpregs __P((struct ispsoftc *));
|
|
|
|
|
1999-10-30 19:35:11 +00:00
|
|
|
#ifndef ISP_CODE_ORG
|
|
|
|
#define ISP_CODE_ORG 0x1000
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_1040_RISC_CODE
|
|
|
|
#define ISP_1040_RISC_CODE NULL
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_1080_RISC_CODE
|
|
|
|
#define ISP_1080_RISC_CODE NULL
|
|
|
|
#endif
|
2000-02-11 19:45:17 +00:00
|
|
|
#ifndef ISP_12160_RISC_CODE
|
|
|
|
#define ISP_12160_RISC_CODE NULL
|
|
|
|
#endif
|
1999-10-30 19:35:11 +00:00
|
|
|
#ifndef ISP_2100_RISC_CODE
|
|
|
|
#define ISP_2100_RISC_CODE NULL
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_2200_RISC_CODE
|
|
|
|
#define ISP_2200_RISC_CODE NULL
|
|
|
|
#endif
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_1020_SUPPORT
|
1998-04-22 18:12:29 +00:00
|
|
|
static struct ispmdvec mdvec = {
|
|
|
|
isp_pci_rd_reg,
|
|
|
|
isp_pci_wr_reg,
|
|
|
|
isp_pci_mbxdma,
|
|
|
|
isp_pci_dmasetup,
|
1998-09-15 10:06:23 +00:00
|
|
|
isp_pci_dmateardown,
|
1998-04-22 18:12:29 +00:00
|
|
|
NULL,
|
|
|
|
isp_pci_reset1,
|
|
|
|
isp_pci_dumpregs,
|
1999-10-30 19:35:11 +00:00
|
|
|
ISP_1040_RISC_CODE,
|
|
|
|
0,
|
1998-04-22 18:12:29 +00:00
|
|
|
ISP_CODE_ORG,
|
1999-10-17 19:03:11 +00:00
|
|
|
0,
|
1999-01-10 02:45:51 +00:00
|
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64,
|
1998-09-15 10:06:23 +00:00
|
|
|
0
|
1998-04-22 18:12:29 +00:00
|
|
|
};
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_1080_SUPPORT
|
|
|
|
static struct ispmdvec mdvec_1080 = {
|
|
|
|
isp_pci_rd_reg_1080,
|
|
|
|
isp_pci_wr_reg_1080,
|
|
|
|
isp_pci_mbxdma,
|
|
|
|
isp_pci_dmasetup,
|
|
|
|
isp_pci_dmateardown,
|
|
|
|
NULL,
|
|
|
|
isp_pci_reset1,
|
|
|
|
isp_pci_dumpregs,
|
1999-10-30 19:35:11 +00:00
|
|
|
ISP_1080_RISC_CODE,
|
|
|
|
0,
|
|
|
|
ISP_CODE_ORG,
|
1999-10-17 19:03:11 +00:00
|
|
|
0,
|
1999-03-17 05:07:18 +00:00
|
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64,
|
|
|
|
0
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
#ifndef ISP_DISABLE_12160_SUPPORT
|
|
|
|
static struct ispmdvec mdvec_12160 = {
|
|
|
|
isp_pci_rd_reg_1080,
|
|
|
|
isp_pci_wr_reg_1080,
|
|
|
|
isp_pci_mbxdma,
|
|
|
|
isp_pci_dmasetup,
|
|
|
|
isp_pci_dmateardown,
|
|
|
|
NULL,
|
|
|
|
isp_pci_reset1,
|
|
|
|
isp_pci_dumpregs,
|
|
|
|
ISP_12160_RISC_CODE,
|
|
|
|
0,
|
|
|
|
ISP_CODE_ORG,
|
|
|
|
0,
|
|
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64,
|
|
|
|
0
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_2100_SUPPORT
|
1998-04-22 18:12:29 +00:00
|
|
|
static struct ispmdvec mdvec_2100 = {
|
|
|
|
isp_pci_rd_reg,
|
|
|
|
isp_pci_wr_reg,
|
|
|
|
isp_pci_mbxdma,
|
|
|
|
isp_pci_dmasetup,
|
1998-09-15 10:06:23 +00:00
|
|
|
isp_pci_dmateardown,
|
1998-04-22 18:12:29 +00:00
|
|
|
NULL,
|
|
|
|
isp_pci_reset1,
|
|
|
|
isp_pci_dumpregs,
|
1999-10-30 19:35:11 +00:00
|
|
|
ISP_2100_RISC_CODE,
|
|
|
|
0,
|
|
|
|
ISP_CODE_ORG,
|
1999-10-17 19:03:11 +00:00
|
|
|
0,
|
|
|
|
0,
|
1998-09-15 10:06:23 +00:00
|
|
|
0
|
1998-04-22 18:12:29 +00:00
|
|
|
};
|
1999-07-05 20:24:46 +00:00
|
|
|
#endif
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
|
1999-07-05 22:01:48 +00:00
|
|
|
#ifndef ISP_DISABLE_2200_SUPPORT
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
static struct ispmdvec mdvec_2200 = {
|
|
|
|
isp_pci_rd_reg,
|
|
|
|
isp_pci_wr_reg,
|
|
|
|
isp_pci_mbxdma,
|
|
|
|
isp_pci_dmasetup,
|
|
|
|
isp_pci_dmateardown,
|
|
|
|
NULL,
|
|
|
|
isp_pci_reset1,
|
|
|
|
isp_pci_dumpregs,
|
1999-10-30 19:35:11 +00:00
|
|
|
ISP_2200_RISC_CODE,
|
|
|
|
0,
|
|
|
|
ISP_CODE_ORG,
|
1999-10-17 19:03:11 +00:00
|
|
|
0,
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
0,
|
|
|
|
0
|
|
|
|
};
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
#ifndef SCSI_ISP_PREFER_MEM_MAP
|
|
|
|
#define SCSI_ISP_PREFER_MEM_MAP 0
|
|
|
|
#endif
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
#ifndef PCIM_CMD_INVEN
|
1998-09-15 10:06:23 +00:00
|
|
|
#define PCIM_CMD_INVEN 0x10
|
1998-04-22 18:12:29 +00:00
|
|
|
#endif
|
|
|
|
#ifndef PCIM_CMD_BUSMASTEREN
|
1998-09-15 10:06:23 +00:00
|
|
|
#define PCIM_CMD_BUSMASTEREN 0x0004
|
1998-04-22 18:12:29 +00:00
|
|
|
#endif
|
1999-02-09 01:12:52 +00:00
|
|
|
#ifndef PCIM_CMD_PERRESPEN
|
|
|
|
#define PCIM_CMD_PERRESPEN 0x0040
|
|
|
|
#endif
|
|
|
|
#ifndef PCIM_CMD_SEREN
|
|
|
|
#define PCIM_CMD_SEREN 0x0100
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef PCIR_COMMAND
|
|
|
|
#define PCIR_COMMAND 0x04
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef PCIR_CACHELNSZ
|
|
|
|
#define PCIR_CACHELNSZ 0x0c
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef PCIR_LATTIMER
|
|
|
|
#define PCIR_LATTIMER 0x0d
|
|
|
|
#endif
|
|
|
|
|
1999-04-04 01:14:02 +00:00
|
|
|
#ifndef PCIR_ROMADDR
|
|
|
|
#define PCIR_ROMADDR 0x30
|
|
|
|
#endif
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
#ifndef PCI_VENDOR_QLOGIC
|
1999-03-17 05:07:18 +00:00
|
|
|
#define PCI_VENDOR_QLOGIC 0x1077
|
1998-04-22 18:12:29 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1020
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP1020 0x1020
|
|
|
|
#endif
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1080
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP1080 0x1080
|
|
|
|
#endif
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP12160
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP12160 0x1216
|
|
|
|
#endif
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1240
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP1240 0x1240
|
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-12-16 05:42:02 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1280
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP1280 0x1280
|
|
|
|
#endif
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2100
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP2100 0x2100
|
|
|
|
#endif
|
|
|
|
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2200
|
|
|
|
#define PCI_PRODUCT_QLOGIC_ISP2200 0x2200
|
|
|
|
#endif
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#define PCI_QLOGIC_ISP ((PCI_PRODUCT_QLOGIC_ISP1020 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
|
|
|
#define PCI_QLOGIC_ISP1080 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP1080 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
#define PCI_QLOGIC_ISP12160 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP12160 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#define PCI_QLOGIC_ISP1240 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP1240 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
1999-12-16 05:42:02 +00:00
|
|
|
#define PCI_QLOGIC_ISP1280 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP1280 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
#define PCI_QLOGIC_ISP2100 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP2100 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
#define PCI_QLOGIC_ISP2200 \
|
|
|
|
((PCI_PRODUCT_QLOGIC_ISP2200 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
#define IO_MAP_REG 0x10
|
|
|
|
#define MEM_MAP_REG 0x14
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
#define PCI_DFLT_LTNCY 0x40
|
|
|
|
#define PCI_DFLT_LNSZ 0x10
|
1998-04-22 18:12:29 +00:00
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
static int isp_pci_probe (device_t);
|
|
|
|
static int isp_pci_attach (device_t);
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1998-09-15 10:06:23 +00:00
|
|
|
/* This distinguishing define is not right, but it does work */
|
1998-09-16 16:43:17 +00:00
|
|
|
#ifdef __alpha__
|
|
|
|
#define IO_SPACE_MAPPING ALPHA_BUS_SPACE_IO
|
|
|
|
#define MEM_SPACE_MAPPING ALPHA_BUS_SPACE_MEM
|
|
|
|
#else
|
|
|
|
#define IO_SPACE_MAPPING I386_BUS_SPACE_IO
|
|
|
|
#define MEM_SPACE_MAPPING I386_BUS_SPACE_MEM
|
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
|
|
|
|
struct isp_pcisoftc {
|
1998-09-15 10:06:23 +00:00
|
|
|
struct ispsoftc pci_isp;
|
2000-02-11 19:45:17 +00:00
|
|
|
device_t pci_dev;
|
|
|
|
struct resource * pci_reg;
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_space_tag_t pci_st;
|
|
|
|
bus_space_handle_t pci_sh;
|
2000-02-11 19:45:17 +00:00
|
|
|
void * ih;
|
1999-03-17 05:07:18 +00:00
|
|
|
int16_t pci_poff[_NREG_BLKS];
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_dma_tag_t parent_dmat;
|
|
|
|
bus_dma_tag_t cntrol_dmat;
|
|
|
|
bus_dmamap_t cntrol_dmap;
|
1999-10-17 19:03:11 +00:00
|
|
|
bus_dmamap_t *dmaps;
|
1998-04-22 18:12:29 +00:00
|
|
|
};
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
static device_method_t isp_pci_methods[] = {
|
|
|
|
/* Device interface */
|
|
|
|
DEVMETHOD(device_probe, isp_pci_probe),
|
|
|
|
DEVMETHOD(device_attach, isp_pci_attach),
|
|
|
|
{ 0, 0 }
|
1998-04-22 18:12:29 +00:00
|
|
|
};
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
static driver_t isp_pci_driver = {
|
|
|
|
"isp", isp_pci_methods, sizeof (struct isp_pcisoftc)
|
|
|
|
};
|
|
|
|
static devclass_t isp_devclass;
|
|
|
|
DRIVER_MODULE(isp, pci, isp_pci_driver, isp_devclass, 0, 0);
|
1998-04-22 18:12:29 +00:00
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
static int
|
|
|
|
isp_pci_probe(device_t dev)
|
1999-03-17 05:07:18 +00:00
|
|
|
{
|
2000-02-11 19:45:17 +00:00
|
|
|
switch ((pci_get_device(dev) << 16) | (pci_get_vendor(dev))) {
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_1020_SUPPORT
|
1998-04-22 18:12:29 +00:00
|
|
|
case PCI_QLOGIC_ISP:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 1020/1040 PCI SCSI Adapter");
|
1999-03-17 05:07:18 +00:00
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_1080_SUPPORT
|
|
|
|
case PCI_QLOGIC_ISP1080:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 1080 PCI SCSI Adapter");
|
1999-05-11 04:53:57 +00:00
|
|
|
break;
|
|
|
|
case PCI_QLOGIC_ISP1240:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 1240 PCI SCSI Adapter");
|
1998-04-22 18:12:29 +00:00
|
|
|
break;
|
1999-12-16 05:42:02 +00:00
|
|
|
case PCI_QLOGIC_ISP1280:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 1280 PCI SCSI Adapter");
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_12160_SUPPORT
|
|
|
|
case PCI_QLOGIC_ISP12160:
|
|
|
|
device_set_desc(dev, "Qlogic ISP 12160 PCI SCSI Adapter");
|
1999-12-16 05:42:02 +00:00
|
|
|
break;
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_2100_SUPPORT
|
1998-04-22 18:12:29 +00:00
|
|
|
case PCI_QLOGIC_ISP2100:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 2100 PCI FC-AL Adapter");
|
1998-04-22 18:12:29 +00:00
|
|
|
break;
|
1999-07-05 20:24:46 +00:00
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_2200_SUPPORT
|
|
|
|
case PCI_QLOGIC_ISP2200:
|
2000-02-11 19:45:17 +00:00
|
|
|
device_set_desc(dev, "Qlogic ISP 2200 PCI FC-AL Adapter");
|
1999-07-05 20:24:46 +00:00
|
|
|
break;
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
1998-04-22 18:12:29 +00:00
|
|
|
default:
|
2000-02-11 19:45:17 +00:00
|
|
|
return (ENXIO);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
if (device_get_unit(dev) == 0) {
|
1999-10-17 19:03:11 +00:00
|
|
|
CFGPRINTF("Qlogic ISP Driver, FreeBSD Version %d.%d, "
|
|
|
|
"Core Version %d.%d\n",
|
1998-09-15 10:06:23 +00:00
|
|
|
ISP_PLATFORM_VERSION_MAJOR, ISP_PLATFORM_VERSION_MINOR,
|
|
|
|
ISP_CORE_VERSION_MAJOR, ISP_CORE_VERSION_MINOR);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
return (0);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
static int
|
|
|
|
isp_pci_attach(device_t dev)
|
1998-04-22 18:12:29 +00:00
|
|
|
{
|
1999-11-21 02:56:17 +00:00
|
|
|
#ifdef SCSI_ISP_WWN
|
|
|
|
const char *name = SCSI_ISP_WWN;
|
|
|
|
char *vtp = NULL;
|
|
|
|
#endif
|
2000-02-11 19:45:17 +00:00
|
|
|
struct resource *regs, *irq;
|
|
|
|
int unit, bitmap, rtp, rgd, iqd, m1, m2;
|
|
|
|
u_int32_t data, cmd, linesz, psize, basetype;
|
1998-04-22 18:12:29 +00:00
|
|
|
struct isp_pcisoftc *pcs;
|
|
|
|
struct ispsoftc *isp;
|
1999-05-11 04:53:57 +00:00
|
|
|
struct ispmdvec *mdvp;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
bus_size_t lim;
|
1998-04-22 18:12:29 +00:00
|
|
|
ISP_LOCKVAL_DECL;
|
|
|
|
|
1999-07-06 01:24:20 +00:00
|
|
|
/*
|
|
|
|
* Figure out if we're supposed to skip this one.
|
|
|
|
*/
|
2000-02-11 19:45:17 +00:00
|
|
|
unit = device_get_unit(dev);
|
1999-07-06 01:24:20 +00:00
|
|
|
if (getenv_int("isp_disable", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit)) {
|
2000-02-11 19:45:17 +00:00
|
|
|
device_printf(dev, "not configuring\n");
|
|
|
|
return (ENODEV);
|
1999-07-06 01:24:20 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2000-02-11 19:45:17 +00:00
|
|
|
pcs = malloc(sizeof (struct isp_pcisoftc), M_DEVBUF, M_NOWAIT);
|
|
|
|
if (pcs == NULL) {
|
|
|
|
device_printf(dev, "cannot allocate softc\n");
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
bzero(pcs, sizeof (struct isp_pcisoftc));
|
|
|
|
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
/*
|
|
|
|
* Figure out which we should try first - memory mapping or i/o mapping?
|
|
|
|
*/
|
|
|
|
#if SCSI_ISP_PREFER_MEM_MAP == 1
|
2000-02-11 19:45:17 +00:00
|
|
|
m1 = PCIM_CMD_MEMEN;
|
|
|
|
m2 = PCIM_CMD_PORTEN;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
#else
|
2000-02-11 19:45:17 +00:00
|
|
|
m1 = PCIM_CMD_PORTEN;
|
|
|
|
m2 = PCIM_CMD_MEMEN;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
#endif
|
|
|
|
bitmap = 0;
|
|
|
|
if (getenv_int("isp_mem_map", &bitmap)) {
|
2000-02-11 19:45:17 +00:00
|
|
|
if (bitmap & (1 << unit)) {
|
|
|
|
m1 = PCIM_CMD_MEMEN;
|
|
|
|
m2 = PCIM_CMD_PORTEN;
|
|
|
|
}
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
}
|
|
|
|
bitmap = 0;
|
|
|
|
if (getenv_int("isp_io_map", &bitmap)) {
|
2000-02-11 19:45:17 +00:00
|
|
|
if (bitmap & (1 << unit)) {
|
|
|
|
m1 = PCIM_CMD_PORTEN;
|
|
|
|
m2 = PCIM_CMD_MEMEN;
|
|
|
|
}
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
}
|
|
|
|
|
1999-04-04 01:14:02 +00:00
|
|
|
linesz = PCI_DFLT_LNSZ;
|
2000-02-11 19:45:17 +00:00
|
|
|
irq = regs = NULL;
|
|
|
|
rgd = rtp = iqd = 0;
|
|
|
|
|
|
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 1);
|
|
|
|
if (cmd & m1) {
|
|
|
|
rtp = (m1 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
|
|
|
|
rgd = (m1 == PCIM_CMD_MEMEN)? MEM_MAP_REG : IO_MAP_REG;
|
|
|
|
regs = bus_alloc_resource(dev, rtp, &rgd, 0, ~0, 1, RF_ACTIVE);
|
1999-02-09 01:12:52 +00:00
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
if (regs == NULL && (cmd & m2)) {
|
|
|
|
rtp = (m2 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
|
|
|
|
rgd = (m2 == PCIM_CMD_MEMEN)? MEM_MAP_REG : IO_MAP_REG;
|
|
|
|
regs = bus_alloc_resource(dev, rtp, &rgd, 0, ~0, 1, RF_ACTIVE);
|
|
|
|
}
|
|
|
|
if (regs == NULL) {
|
|
|
|
device_printf(dev, "unable to map any ports\n");
|
|
|
|
goto bad;
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (bootverbose)
|
|
|
|
printf("isp%d: using %s space register mapping\n", unit,
|
2000-02-11 19:45:17 +00:00
|
|
|
(rgd == IO_MAP_REG)? "I/O" : "Memory");
|
|
|
|
pcs->pci_dev = dev;
|
|
|
|
pcs->pci_reg = regs;
|
|
|
|
pcs->pci_st = rman_get_bustag(regs);
|
|
|
|
pcs->pci_sh = rman_get_bushandle(regs);
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
pcs->pci_poff[BIU_BLOCK >> _BLK_REG_SHFT] = BIU_REGS_OFF;
|
|
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] = PCI_MBOX_REGS_OFF;
|
|
|
|
pcs->pci_poff[SXP_BLOCK >> _BLK_REG_SHFT] = PCI_SXP_REGS_OFF;
|
|
|
|
pcs->pci_poff[RISC_BLOCK >> _BLK_REG_SHFT] = PCI_RISC_REGS_OFF;
|
|
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] = DMA_REGS_OFF;
|
1999-05-11 04:53:57 +00:00
|
|
|
/*
|
|
|
|
* GCC!
|
|
|
|
*/
|
|
|
|
mdvp = &mdvec;
|
|
|
|
basetype = ISP_HA_SCSI_UNKNOWN;
|
|
|
|
psize = sizeof (sdparam);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
lim = BUS_SPACE_MAXSIZE_32BIT;
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_1020_SUPPORT
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP) {
|
1999-05-11 04:53:57 +00:00
|
|
|
mdvp = &mdvec;
|
|
|
|
basetype = ISP_HA_SCSI_UNKNOWN;
|
|
|
|
psize = sizeof (sdparam);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
lim = BUS_SPACE_MAXSIZE_24BIT;
|
1999-03-17 05:07:18 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_1080_SUPPORT
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1080) {
|
1999-05-11 04:53:57 +00:00
|
|
|
mdvp = &mdvec_1080;
|
|
|
|
basetype = ISP_HA_SCSI_1080;
|
|
|
|
psize = sizeof (sdparam);
|
|
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
ISP1080_DMA_REGS_OFF;
|
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1240) {
|
1999-05-11 04:53:57 +00:00
|
|
|
mdvp = &mdvec_1080;
|
1999-12-16 05:42:02 +00:00
|
|
|
basetype = ISP_HA_SCSI_1240;
|
|
|
|
psize = 2 * sizeof (sdparam);
|
|
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
ISP1080_DMA_REGS_OFF;
|
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1280) {
|
1999-12-16 05:42:02 +00:00
|
|
|
mdvp = &mdvec_1080;
|
|
|
|
basetype = ISP_HA_SCSI_1280;
|
1999-05-11 04:53:57 +00:00
|
|
|
psize = 2 * sizeof (sdparam);
|
1999-03-17 05:07:18 +00:00
|
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
ISP1080_DMA_REGS_OFF;
|
|
|
|
}
|
|
|
|
#endif
|
2000-02-29 05:48:46 +00:00
|
|
|
#ifndef ISP_DISABLE_12160_SUPPORT
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP12160) {
|
|
|
|
mdvp = &mdvec_12160;
|
|
|
|
basetype = ISP_HA_SCSI_12160;
|
|
|
|
psize = 2 * sizeof (sdparam);
|
|
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
ISP1080_DMA_REGS_OFF;
|
|
|
|
}
|
|
|
|
#endif
|
1999-03-17 05:07:18 +00:00
|
|
|
#ifndef ISP_DISABLE_2100_SUPPORT
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2100) {
|
1999-05-11 04:53:57 +00:00
|
|
|
mdvp = &mdvec_2100;
|
|
|
|
basetype = ISP_HA_FC_2100;
|
|
|
|
psize = sizeof (fcparam);
|
1999-03-17 05:07:18 +00:00
|
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
PCI_MBOX_REGS2100_OFF;
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_revid(dev) < 3) {
|
1999-04-04 01:14:02 +00:00
|
|
|
/*
|
|
|
|
* XXX: Need to get the actual revision
|
|
|
|
* XXX: number of the 2100 FB. At any rate,
|
|
|
|
* XXX: lower cache line size for early revision
|
|
|
|
* XXX; boards.
|
|
|
|
*/
|
|
|
|
linesz = 1;
|
|
|
|
}
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
1999-07-05 20:24:46 +00:00
|
|
|
#endif
|
|
|
|
#ifndef ISP_DISABLE_2200_SUPPORT
|
2000-02-11 19:45:17 +00:00
|
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2200) {
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
mdvp = &mdvec_2200;
|
|
|
|
basetype = ISP_HA_FC_2200;
|
|
|
|
psize = sizeof (fcparam);
|
|
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
|
|
PCI_MBOX_REGS2100_OFF;
|
|
|
|
}
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
1999-05-11 04:53:57 +00:00
|
|
|
isp = &pcs->pci_isp;
|
|
|
|
isp->isp_param = malloc(psize, M_DEVBUF, M_NOWAIT);
|
|
|
|
if (isp->isp_param == NULL) {
|
2000-02-11 19:45:17 +00:00
|
|
|
device_printf(dev, "cannot allocate parameter data\n");
|
|
|
|
goto bad;
|
1999-05-11 04:53:57 +00:00
|
|
|
}
|
|
|
|
bzero(isp->isp_param, psize);
|
|
|
|
isp->isp_mdvec = mdvp;
|
|
|
|
isp->isp_type = basetype;
|
2000-02-11 19:45:17 +00:00
|
|
|
isp->isp_revision = pci_get_revid(dev);
|
1999-05-11 04:53:57 +00:00
|
|
|
(void) snprintf(isp->isp_name, sizeof (isp->isp_name), "isp%d", unit);
|
|
|
|
isp->isp_osinfo.unit = unit;
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
ISP_LOCK(isp);
|
|
|
|
/*
|
|
|
|
* Make sure that SERR, PERR, WRITE INVALIDATE and BUSMASTER
|
|
|
|
* are set.
|
|
|
|
*/
|
2000-02-11 19:45:17 +00:00
|
|
|
cmd |= PCIM_CMD_SEREN | PCIM_CMD_PERRESPEN |
|
|
|
|
PCIM_CMD_BUSMASTEREN | PCIM_CMD_INVEN;
|
|
|
|
pci_write_config(dev, PCIR_COMMAND, cmd, 1);
|
1999-04-04 01:14:02 +00:00
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
/*
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
* Make sure the Cache Line Size register is set sensibly.
|
1999-02-09 01:12:52 +00:00
|
|
|
*/
|
2000-02-11 19:45:17 +00:00
|
|
|
data = pci_read_config(dev, PCIR_CACHELNSZ, 1);
|
1999-04-04 01:14:02 +00:00
|
|
|
if (data != linesz) {
|
1999-02-09 01:12:52 +00:00
|
|
|
data = PCI_DFLT_LNSZ;
|
1999-10-17 19:03:11 +00:00
|
|
|
CFGPRINTF("%s: set PCI line size to %d\n", isp->isp_name, data);
|
2000-02-11 19:45:17 +00:00
|
|
|
pci_write_config(dev, PCIR_CACHELNSZ, data, 1);
|
1999-02-09 01:12:52 +00:00
|
|
|
}
|
1999-04-04 01:14:02 +00:00
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
/*
|
|
|
|
* Make sure the Latency Timer is sane.
|
|
|
|
*/
|
2000-02-11 19:45:17 +00:00
|
|
|
data = pci_read_config(dev, PCIR_LATTIMER, 1);
|
1999-02-09 01:12:52 +00:00
|
|
|
if (data < PCI_DFLT_LTNCY) {
|
|
|
|
data = PCI_DFLT_LTNCY;
|
1999-10-17 19:03:11 +00:00
|
|
|
CFGPRINTF("%s: set PCI latency to %d\n", isp->isp_name, data);
|
2000-02-11 19:45:17 +00:00
|
|
|
pci_write_config(dev, PCIR_LATTIMER, data, 1);
|
1999-02-09 01:12:52 +00:00
|
|
|
}
|
1999-04-04 01:14:02 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure we've disabled the ROM.
|
|
|
|
*/
|
2000-02-11 19:45:17 +00:00
|
|
|
data = pci_read_config(dev, PCIR_ROMADDR, 4);
|
1999-04-04 01:14:02 +00:00
|
|
|
data &= ~1;
|
2000-02-11 19:45:17 +00:00
|
|
|
pci_write_config(dev, PCIR_ROMADDR, data, 4);
|
1999-02-09 01:12:52 +00:00
|
|
|
ISP_UNLOCK(isp);
|
|
|
|
|
1999-08-16 01:52:21 +00:00
|
|
|
if (bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
BUS_SPACE_MAXADDR, NULL, NULL, lim + 1,
|
|
|
|
255, lim, 0, &pcs->parent_dmat) != 0) {
|
1998-09-15 10:06:23 +00:00
|
|
|
printf("%s: could not create master dma tag\n", isp->isp_name);
|
2000-02-11 19:45:17 +00:00
|
|
|
free(isp->isp_param, M_DEVBUF);
|
1998-09-15 10:06:23 +00:00
|
|
|
free(pcs, M_DEVBUF);
|
2000-02-11 19:45:17 +00:00
|
|
|
return (ENXIO);
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
|
|
|
|
iqd = 0;
|
|
|
|
irq = bus_alloc_resource(dev, SYS_RES_IRQ, &iqd, 0, ~0,
|
|
|
|
1, RF_ACTIVE | RF_SHAREABLE);
|
|
|
|
if (irq == NULL) {
|
|
|
|
device_printf(dev, "could not allocate interrupt\n");
|
|
|
|
goto bad;
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
#ifdef SCSI_ISP_NO_FWLOAD_MASK
|
|
|
|
if (SCSI_ISP_NO_FWLOAD_MASK && (SCSI_ISP_NO_FWLOAD_MASK & (1 << unit)))
|
|
|
|
isp->isp_confopts |= ISP_CFG_NORELOAD;
|
|
|
|
#endif
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (getenv_int("isp_no_fwload", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts |= ISP_CFG_NORELOAD;
|
|
|
|
}
|
|
|
|
if (getenv_int("isp_fwload", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts &= ~ISP_CFG_NORELOAD;
|
|
|
|
}
|
|
|
|
|
1999-02-09 01:12:52 +00:00
|
|
|
#ifdef SCSI_ISP_NO_NVRAM_MASK
|
1999-04-04 01:14:02 +00:00
|
|
|
if (SCSI_ISP_NO_NVRAM_MASK && (SCSI_ISP_NO_NVRAM_MASK & (1 << unit))) {
|
|
|
|
printf("%s: ignoring NVRAM\n", isp->isp_name);
|
1999-02-09 01:12:52 +00:00
|
|
|
isp->isp_confopts |= ISP_CFG_NONVRAM;
|
1999-04-04 01:14:02 +00:00
|
|
|
}
|
1999-02-09 01:12:52 +00:00
|
|
|
#endif
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (getenv_int("isp_no_nvram", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts |= ISP_CFG_NONVRAM;
|
|
|
|
}
|
|
|
|
if (getenv_int("isp_nvram", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts &= ~ISP_CFG_NONVRAM;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef SCSI_ISP_FCDUPLEX
|
|
|
|
if (IS_FC(isp)) {
|
|
|
|
if (SCSI_ISP_FCDUPLEX && (SCSI_ISP_FCDUPLEX & (1 << unit))) {
|
|
|
|
isp->isp_confopts |= ISP_CFG_FULL_DUPLEX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
if (getenv_int("isp_fcduplex", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts |= ISP_CFG_FULL_DUPLEX;
|
|
|
|
}
|
|
|
|
if (getenv_int("isp_no_fcduplex", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts &= ~ISP_CFG_FULL_DUPLEX;
|
|
|
|
}
|
2000-02-11 19:45:17 +00:00
|
|
|
if (getenv_int("isp_nport", &bitmap)) {
|
|
|
|
if (bitmap & (1 << unit))
|
|
|
|
isp->isp_confopts |= ISP_CFG_NPORT;
|
|
|
|
}
|
1999-11-21 02:56:17 +00:00
|
|
|
/*
|
|
|
|
* Look for overriding WWN. This is a Node WWN so it binds to
|
|
|
|
* all FC instances. A Port WWN will be constructed from it
|
|
|
|
* as appropriate.
|
|
|
|
*/
|
|
|
|
#ifdef SCSI_ISP_WWN
|
|
|
|
isp->isp_osinfo.default_wwn = strtoq(name, &vtp, 16);
|
|
|
|
if (vtp != name && *vtp == 0) {
|
|
|
|
isp->isp_confopts |= ISP_CFG_OWNWWN;
|
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
if (!getenv_quad("isp_wwn", (quad_t *) &isp->isp_osinfo.default_wwn)) {
|
|
|
|
int i;
|
|
|
|
u_int64_t seed = (u_int64_t) (intptr_t) isp;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
|
1999-11-21 02:56:17 +00:00
|
|
|
seed <<= 16;
|
|
|
|
seed &= ((1LL << 48) - 1LL);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
/*
|
1999-11-21 02:56:17 +00:00
|
|
|
* This isn't very random, but it's the best we can do for
|
|
|
|
* the real edge case of cards that don't have WWNs. If
|
|
|
|
* you recompile a new vers.c, you'll get a different WWN.
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
*/
|
1999-11-21 02:56:17 +00:00
|
|
|
for (i = 0; version[i] != 0; i++) {
|
|
|
|
seed += version[i];
|
|
|
|
}
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
/*
|
1999-11-21 02:56:17 +00:00
|
|
|
* Make sure the top nibble has something vaguely sensible.
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
*/
|
1999-11-21 02:56:17 +00:00
|
|
|
isp->isp_osinfo.default_wwn |= (4LL << 60) | seed;
|
|
|
|
} else {
|
|
|
|
isp->isp_confopts |= ISP_CFG_OWNWWN;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
}
|
1999-10-17 19:03:11 +00:00
|
|
|
(void) getenv_int("isp_debug", &isp_debug);
|
2000-01-04 03:41:40 +00:00
|
|
|
#ifdef ISP_TARGET_MODE
|
|
|
|
(void) getenv_int("isp_tdebug", &isp_tdebug);
|
|
|
|
#endif
|
1998-09-15 10:06:23 +00:00
|
|
|
ISP_LOCK(isp);
|
2000-02-11 19:45:17 +00:00
|
|
|
if (bus_setup_intr(dev, irq, INTR_TYPE_CAM, (void (*)(void *))isp_intr,
|
|
|
|
isp, &pcs->ih)) {
|
|
|
|
ISP_UNLOCK(isp);
|
|
|
|
device_printf(dev, "could not setup interrupt\n");
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
isp_reset(isp);
|
|
|
|
if (isp->isp_state != ISP_RESETSTATE) {
|
1998-09-15 10:06:23 +00:00
|
|
|
ISP_UNLOCK(isp);
|
2000-02-11 19:45:17 +00:00
|
|
|
goto bad;
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
isp_init(isp);
|
|
|
|
if (isp->isp_state != ISP_INITSTATE) {
|
1999-03-17 05:07:18 +00:00
|
|
|
/* If we're a Fibre Channel Card, we allow deferred attach */
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (IS_SCSI(isp)) {
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_uninit(isp);
|
1999-05-11 04:53:57 +00:00
|
|
|
ISP_UNLOCK(isp);
|
2000-02-11 19:45:17 +00:00
|
|
|
goto bad;
|
1999-03-17 05:07:18 +00:00
|
|
|
}
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
isp_attach(isp);
|
|
|
|
if (isp->isp_state != ISP_RUNSTATE) {
|
1999-03-17 05:07:18 +00:00
|
|
|
/* If we're a Fibre Channel Card, we allow deferred attach */
|
1999-03-25 22:53:56 +00:00
|
|
|
if (IS_SCSI(isp)) {
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_uninit(isp);
|
1999-05-11 04:53:57 +00:00
|
|
|
ISP_UNLOCK(isp);
|
2000-02-11 19:45:17 +00:00
|
|
|
goto bad;
|
1999-03-17 05:07:18 +00:00
|
|
|
}
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
ISP_UNLOCK(isp);
|
2000-02-11 19:45:17 +00:00
|
|
|
return (0);
|
|
|
|
|
|
|
|
bad:
|
|
|
|
|
|
|
|
if (pcs && pcs->ih) {
|
|
|
|
(void) bus_teardown_intr(dev, irq, pcs->ih);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (irq) {
|
|
|
|
(void) bus_release_resource(dev, SYS_RES_IRQ, iqd, irq);
|
|
|
|
}
|
|
|
|
if (regs) {
|
|
|
|
(void) bus_release_resource(dev, rtp, rgd, regs);
|
|
|
|
}
|
|
|
|
if (pcs) {
|
|
|
|
if (pcs->pci_isp.isp_param)
|
|
|
|
free(pcs->pci_isp.isp_param, M_DEVBUF);
|
|
|
|
free(pcs, M_DEVBUF);
|
|
|
|
}
|
|
|
|
return (ENXIO);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
static u_int16_t
|
|
|
|
isp_pci_rd_reg(isp, regoff)
|
|
|
|
struct ispsoftc *isp;
|
|
|
|
int regoff;
|
|
|
|
{
|
|
|
|
u_int16_t rv;
|
|
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
|
|
int offset, oldconf = 0;
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1999-03-17 05:07:18 +00:00
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
|
|
/*
|
|
|
|
* We will assume that someone has paused the RISC processor.
|
|
|
|
*/
|
|
|
|
oldconf = isp_pci_rd_reg(isp, BIU_CONF1);
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oldconf | BIU_PCI_CONF1_SXP);
|
|
|
|
}
|
|
|
|
offset = pcs->pci_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
|
|
|
|
offset += (regoff & 0xff);
|
|
|
|
rv = bus_space_read_2(pcs->pci_st, pcs->pci_sh, offset);
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oldconf);
|
|
|
|
}
|
|
|
|
return (rv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
isp_pci_wr_reg(isp, regoff, val)
|
|
|
|
struct ispsoftc *isp;
|
|
|
|
int regoff;
|
|
|
|
u_int16_t val;
|
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
|
|
int offset, oldconf = 0;
|
|
|
|
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
|
|
/*
|
|
|
|
* We will assume that someone has paused the RISC processor.
|
|
|
|
*/
|
|
|
|
oldconf = isp_pci_rd_reg(isp, BIU_CONF1);
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oldconf | BIU_PCI_CONF1_SXP);
|
|
|
|
}
|
|
|
|
offset = pcs->pci_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
|
|
|
|
offset += (regoff & 0xff);
|
|
|
|
bus_space_write_2(pcs->pci_st, pcs->pci_sh, offset, val);
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oldconf);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2000-02-29 05:48:46 +00:00
|
|
|
#if !defined(ISP_DISABLE_1080_SUPPORT) || !defined(ISP_DISABLE_12160_SUPPORT)
|
1998-04-22 18:12:29 +00:00
|
|
|
static u_int16_t
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_pci_rd_reg_1080(isp, regoff)
|
|
|
|
struct ispsoftc *isp;
|
|
|
|
int regoff;
|
1998-04-22 18:12:29 +00:00
|
|
|
{
|
1999-12-16 05:42:02 +00:00
|
|
|
u_int16_t rv, oc = 0;
|
1998-04-22 18:12:29 +00:00
|
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
1999-12-16 05:42:02 +00:00
|
|
|
int offset;
|
1999-03-17 05:07:18 +00:00
|
|
|
|
1999-12-16 05:42:02 +00:00
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK ||
|
|
|
|
(regoff & _BLK_REG_MASK) == (SXP_BLOCK|SXP_BANK1_SELECT)) {
|
|
|
|
u_int16_t tc;
|
1998-04-22 18:12:29 +00:00
|
|
|
/*
|
|
|
|
* We will assume that someone has paused the RISC processor.
|
|
|
|
*/
|
1999-03-17 05:07:18 +00:00
|
|
|
oc = isp_pci_rd_reg(isp, BIU_CONF1);
|
1999-12-16 05:42:02 +00:00
|
|
|
tc = oc & ~BIU_PCI1080_CONF1_DMA;
|
|
|
|
if (regoff & SXP_BANK1_SELECT)
|
|
|
|
tc |= BIU_PCI1080_CONF1_SXP1;
|
|
|
|
else
|
|
|
|
tc |= BIU_PCI1080_CONF1_SXP0;
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, tc);
|
1999-03-17 05:07:18 +00:00
|
|
|
} else if ((regoff & _BLK_REG_MASK) == DMA_BLOCK) {
|
|
|
|
oc = isp_pci_rd_reg(isp, BIU_CONF1);
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oc | BIU_PCI1080_CONF1_DMA);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
1999-03-17 05:07:18 +00:00
|
|
|
offset = pcs->pci_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
|
|
|
|
offset += (regoff & 0xff);
|
1998-04-22 18:12:29 +00:00
|
|
|
rv = bus_space_read_2(pcs->pci_st, pcs->pci_sh, offset);
|
1999-12-16 05:42:02 +00:00
|
|
|
if (oc) {
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oc);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
return (rv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_pci_wr_reg_1080(isp, regoff, val)
|
|
|
|
struct ispsoftc *isp;
|
|
|
|
int regoff;
|
|
|
|
u_int16_t val;
|
1998-04-22 18:12:29 +00:00
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
1999-03-17 05:07:18 +00:00
|
|
|
int offset, oc = 0;
|
|
|
|
|
1999-12-16 05:42:02 +00:00
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK ||
|
|
|
|
(regoff & _BLK_REG_MASK) == (SXP_BLOCK|SXP_BANK1_SELECT)) {
|
|
|
|
u_int16_t tc;
|
1998-04-22 18:12:29 +00:00
|
|
|
/*
|
|
|
|
* We will assume that someone has paused the RISC processor.
|
|
|
|
*/
|
1999-03-17 05:07:18 +00:00
|
|
|
oc = isp_pci_rd_reg(isp, BIU_CONF1);
|
1999-12-16 05:42:02 +00:00
|
|
|
tc = oc & ~BIU_PCI1080_CONF1_DMA;
|
|
|
|
if (regoff & SXP_BANK1_SELECT)
|
|
|
|
tc |= BIU_PCI1080_CONF1_SXP1;
|
|
|
|
else
|
|
|
|
tc |= BIU_PCI1080_CONF1_SXP0;
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, tc);
|
1999-03-17 05:07:18 +00:00
|
|
|
} else if ((regoff & _BLK_REG_MASK) == DMA_BLOCK) {
|
|
|
|
oc = isp_pci_rd_reg(isp, BIU_CONF1);
|
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oc | BIU_PCI1080_CONF1_DMA);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
1999-03-17 05:07:18 +00:00
|
|
|
offset = pcs->pci_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
|
|
|
|
offset += (regoff & 0xff);
|
1998-04-22 18:12:29 +00:00
|
|
|
bus_space_write_2(pcs->pci_st, pcs->pci_sh, offset, val);
|
1999-12-16 05:42:02 +00:00
|
|
|
if (oc) {
|
1999-03-17 05:07:18 +00:00
|
|
|
isp_pci_wr_reg(isp, BIU_CONF1, oc);
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|
|
|
|
}
|
1999-03-17 05:07:18 +00:00
|
|
|
#endif
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
|
1998-09-15 10:06:23 +00:00
|
|
|
static void isp_map_rquest __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
static void isp_map_result __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
static void isp_map_fcscrt __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
struct imush {
|
|
|
|
struct ispsoftc *isp;
|
|
|
|
int error;
|
|
|
|
};
|
|
|
|
|
1998-09-15 10:06:23 +00:00
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_map_rquest(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
struct imush *imushp = (struct imush *) arg;
|
|
|
|
if (error) {
|
|
|
|
imushp->error = error;
|
|
|
|
} else {
|
|
|
|
imushp->isp->isp_rquest_dma = segs->ds_addr;
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_map_result(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
struct imush *imushp = (struct imush *) arg;
|
|
|
|
if (error) {
|
|
|
|
imushp->error = error;
|
|
|
|
} else {
|
|
|
|
imushp->isp->isp_result_dma = segs->ds_addr;
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_map_fcscrt(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
struct imush *imushp = (struct imush *) arg;
|
|
|
|
if (error) {
|
|
|
|
imushp->error = error;
|
|
|
|
} else {
|
|
|
|
fcparam *fcp = imushp->isp->isp_param;
|
|
|
|
fcp->isp_scdma = segs->ds_addr;
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_pci_mbxdma(struct ispsoftc *isp)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pci = (struct isp_pcisoftc *)isp;
|
|
|
|
caddr_t base;
|
|
|
|
u_int32_t len;
|
|
|
|
int i, error;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
bus_size_t lim;
|
|
|
|
struct imush im;
|
|
|
|
|
|
|
|
|
1999-10-17 19:03:11 +00:00
|
|
|
/*
|
|
|
|
* Already been here? If so, leave...
|
|
|
|
*/
|
|
|
|
if (isp->isp_rquest) {
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
len = sizeof (ISP_SCSI_XFER_T **) * isp->isp_maxcmds;
|
|
|
|
isp->isp_xflist = (ISP_SCSI_XFER_T **) malloc(len, M_DEVBUF, M_WAITOK);
|
|
|
|
if (isp->isp_xflist == NULL) {
|
|
|
|
printf("%s: can't alloc xflist array\n", isp->isp_name);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
bzero(isp->isp_xflist, len);
|
|
|
|
len = sizeof (bus_dmamap_t) * isp->isp_maxcmds;
|
|
|
|
pci->dmaps = (bus_dmamap_t *) malloc(len, M_DEVBUF, M_WAITOK);
|
|
|
|
if (pci->dmaps == NULL) {
|
|
|
|
printf("%s: can't alloc dma maps\n", isp->isp_name);
|
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
1999-12-16 05:42:02 +00:00
|
|
|
if (IS_FC(isp) || IS_ULTRA2(isp))
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
lim = BUS_SPACE_MAXADDR + 1;
|
|
|
|
else
|
|
|
|
lim = BUS_SPACE_MAXADDR_24BIT + 1;
|
1998-09-15 10:06:23 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate and map the request, result queues, plus FC scratch area.
|
|
|
|
*/
|
|
|
|
len = ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN);
|
|
|
|
len += ISP_QUEUE_SIZE(RESULT_QUEUE_LEN);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (IS_FC(isp)) {
|
1998-09-15 10:06:23 +00:00
|
|
|
len += ISP2100_SCRLEN;
|
|
|
|
}
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (bus_dma_tag_create(pci->parent_dmat, PAGE_SIZE, lim,
|
|
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, len, 1,
|
|
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, &pci->cntrol_dmat) != 0) {
|
1998-09-15 10:06:23 +00:00
|
|
|
printf("%s: cannot create a dma tag for control spaces\n",
|
|
|
|
isp->isp_name);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
1998-09-15 10:06:23 +00:00
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
if (bus_dmamem_alloc(pci->cntrol_dmat, (void **)&base,
|
|
|
|
BUS_DMA_NOWAIT, &pci->cntrol_dmap) != 0) {
|
1998-09-17 21:11:21 +00:00
|
|
|
printf("%s: cannot allocate %d bytes of CCB memory\n",
|
|
|
|
isp->isp_name, len);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
1998-09-15 10:06:23 +00:00
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
isp->isp_rquest = base;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
im.isp = isp;
|
|
|
|
im.error = 0;
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_dmamap_load(pci->cntrol_dmat, pci->cntrol_dmap, isp->isp_rquest,
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN), isp_map_rquest, &im, 0);
|
|
|
|
if (im.error) {
|
|
|
|
printf("%s: error %d loading dma map for DMA request queue\n",
|
|
|
|
isp->isp_name, im.error);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
|
|
|
isp->isp_rquest = NULL;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
return (1);
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
isp->isp_result = base + ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
im.error = 0;
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_dmamap_load(pci->cntrol_dmat, pci->cntrol_dmap, isp->isp_result,
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
ISP_QUEUE_SIZE(RESULT_QUEUE_LEN), isp_map_result, &im, 0);
|
|
|
|
if (im.error) {
|
|
|
|
printf("%s: error %d loading dma map for DMA result queue\n",
|
|
|
|
isp->isp_name, im.error);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
|
|
|
isp->isp_rquest = NULL;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
return (1);
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
|
1999-10-17 19:03:11 +00:00
|
|
|
for (i = 0; i < isp->isp_maxcmds; i++) {
|
1998-09-15 10:06:23 +00:00
|
|
|
error = bus_dmamap_create(pci->parent_dmat, 0, &pci->dmaps[i]);
|
|
|
|
if (error) {
|
1999-10-17 19:03:11 +00:00
|
|
|
printf("%s: error %d creating per-cmd DMA maps\n",
|
1998-09-15 10:06:23 +00:00
|
|
|
isp->isp_name, error);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
|
|
|
isp->isp_rquest = NULL;
|
1998-09-15 10:06:23 +00:00
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
}
|
1999-10-17 19:03:11 +00:00
|
|
|
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
if (IS_FC(isp)) {
|
1999-03-25 22:53:56 +00:00
|
|
|
fcparam *fcp = (fcparam *) isp->isp_param;
|
|
|
|
fcp->isp_scratch = base +
|
|
|
|
ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN) +
|
|
|
|
ISP_QUEUE_SIZE(RESULT_QUEUE_LEN);
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
im.error = 0;
|
1999-03-25 22:53:56 +00:00
|
|
|
bus_dmamap_load(pci->cntrol_dmat, pci->cntrol_dmap,
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
fcp->isp_scratch, ISP2100_SCRLEN, isp_map_fcscrt, &im, 0);
|
|
|
|
if (im.error) {
|
|
|
|
printf("%s: error %d loading FC scratch area\n",
|
|
|
|
isp->isp_name, im.error);
|
1999-10-17 19:03:11 +00:00
|
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
|
|
free(pci->dmaps, M_DEVBUF);
|
|
|
|
isp->isp_rquest = NULL;
|
Remove pre-CAM code. Add in getenv_int calls for variables isp_mem_map,
isp_io_map, isp_no_fwload, isp_fwload, isp_no_nvram, isp_fcduplex
which are all bitmaps of isp instances that should or shouldn't
map memory space, I/O space, not load f/w, load f/w, ignore nvram,
not ignore nvarm, set full duplex mode. Also have an isp_seed value
that we can use to generate a pseudo seed for a synthetic WWN.
Other minor cosmetic cleanup. Add in support for the Qlogic ISP
2200. Very important change where we actually check now to see
whether we were successful in mapping request and response queues
(and fibre channel scratch space).
1999-07-02 23:18:03 +00:00
|
|
|
return (1);
|
|
|
|
}
|
1999-03-25 22:53:56 +00:00
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
struct ispsoftc *isp;
|
2000-01-03 23:50:13 +00:00
|
|
|
void *cmd_token;
|
|
|
|
void *rq;
|
1999-11-21 02:56:17 +00:00
|
|
|
u_int16_t *iptrp;
|
|
|
|
u_int16_t optr;
|
1998-09-15 10:06:23 +00:00
|
|
|
u_int error;
|
|
|
|
} mush_t;
|
|
|
|
|
1998-09-17 21:11:21 +00:00
|
|
|
#define MUSHERR_NOQENTRIES -2
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
#ifdef ISP_TARGET_MODE
|
|
|
|
/*
|
|
|
|
* We need to handle DMA for target mode differently from initiator mode.
|
|
|
|
*
|
|
|
|
* DMA mapping and construction and submission of CTIO Request Entries
|
|
|
|
* and rendevous for completion are very tightly coupled because we start
|
|
|
|
* out by knowing (per platform) how much data we have to move, but we
|
|
|
|
* don't know, up front, how many DMA mapping segments will have to be used
|
|
|
|
* cover that data, so we don't know how many CTIO Request Entries we
|
|
|
|
* will end up using. Further, for performance reasons we may want to
|
|
|
|
* (on the last CTIO for Fibre Channel), send status too (if all went well).
|
|
|
|
*
|
|
|
|
* The standard vector still goes through isp_pci_dmasetup, but the callback
|
|
|
|
* for the DMA mapping routines comes here instead with the whole transfer
|
|
|
|
* mapped and a pointer to a partially filled in already allocated request
|
|
|
|
* queue entry. We finish the job.
|
|
|
|
*/
|
|
|
|
static void dma2_tgt __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
static void dma2_tgt_fc __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
|
|
|
|
static void
|
|
|
|
dma2_tgt(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
|
|
{
|
|
|
|
mush_t *mp;
|
|
|
|
struct ccb_scsiio *csio;
|
|
|
|
struct isp_pcisoftc *pci;
|
|
|
|
bus_dmamap_t *dp;
|
|
|
|
u_int8_t scsi_status, send_status;
|
|
|
|
ct_entry_t *cto;
|
|
|
|
u_int32_t handle;
|
|
|
|
int nctios;
|
|
|
|
|
|
|
|
mp = (mush_t *) arg;
|
|
|
|
if (error) {
|
|
|
|
mp->error = error;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
csio = mp->cmd_token;
|
|
|
|
cto = mp->rq;
|
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
cto->ct_xfrlen = 0;
|
|
|
|
cto->ct_resid = 0;
|
|
|
|
cto->ct_seg_count = 0;
|
|
|
|
bzero(cto->ct_dataseg, sizeof (cto->ct_dataseg));
|
|
|
|
if (nseg == 0) {
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
|
|
ISP_TDQE(mp->isp, "dma2_tgt[no data]", *mp->iptrp, cto);
|
|
|
|
if (isp_tdebug) {
|
|
|
|
printf("%s:CTIO lun %d->iid%d flgs 0x%x sts 0x%x ssts "
|
|
|
|
"0x%x res %u\n", mp->isp->isp_name,
|
|
|
|
csio->ccb_h.target_lun, cto->ct_iid, cto->ct_flags,
|
|
|
|
cto->ct_status, cto->ct_scsi_status, cto->ct_resid);
|
|
|
|
}
|
|
|
|
ISP_SWIZ_CTIO(isp, cto, cto);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
/*
|
|
|
|
* Save handle, and potentially any SCSI status, which
|
|
|
|
* we'll reinsert on the last CTIO we're going to send.
|
|
|
|
*/
|
|
|
|
handle = cto->ct_reserved;
|
|
|
|
cto->ct_reserved = 0;
|
|
|
|
scsi_status = cto->ct_scsi_status;
|
|
|
|
cto->ct_scsi_status = 0;
|
|
|
|
send_status = cto->ct_flags & CT_SENDSTATUS;
|
|
|
|
cto->ct_flags &= ~CT_SENDSTATUS;
|
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
nctios = nseg / ISP_RQDSEG;
|
|
|
|
if (nseg % ISP_RQDSEG) {
|
|
|
|
nctios++;
|
|
|
|
}
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
pci = (struct isp_pcisoftc *)mp->isp;
|
|
|
|
dp = &pci->dmaps[handle - 1];
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
|
|
} else {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
while (nctios--) {
|
|
|
|
int seg, seglim;
|
|
|
|
|
|
|
|
seglim = nseg;
|
|
|
|
if (seglim > ISP_RQDSEG)
|
|
|
|
seglim = ISP_RQDSEG;
|
|
|
|
|
|
|
|
for (seg = 0; seg < seglim; seg++) {
|
|
|
|
cto->ct_dataseg[seg].ds_base = dm_segs->ds_addr;
|
|
|
|
cto->ct_dataseg[seg].ds_count = dm_segs->ds_len;
|
|
|
|
cto->ct_xfrlen += dm_segs->ds_len;
|
|
|
|
dm_segs++;
|
|
|
|
}
|
|
|
|
|
|
|
|
cto->ct_seg_count = seg;
|
2000-01-15 01:54:36 +00:00
|
|
|
cto->ct_flags &= CT_DATAMASK;
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
|
|
cto->ct_flags |= CT_DATA_IN;
|
|
|
|
} else {
|
|
|
|
cto->ct_flags |= CT_DATA_OUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nctios == 0) {
|
|
|
|
/*
|
|
|
|
* We're the last in a sequence of CTIOs, so mark this
|
|
|
|
* CTIO and save the handle to the CCB such that when
|
|
|
|
* this CTIO completes we can free dma resources and
|
|
|
|
* do whatever else we need to do to finish the rest
|
|
|
|
* of the command.
|
|
|
|
*/
|
|
|
|
cto->ct_header.rqs_seqno = 1;
|
|
|
|
cto->ct_reserved = handle;
|
|
|
|
cto->ct_scsi_status = scsi_status;
|
|
|
|
cto->ct_flags |= send_status;
|
|
|
|
ISP_TDQE(mp->isp, "last dma2_tgt", *mp->iptrp, cto);
|
2000-01-04 03:41:40 +00:00
|
|
|
if (isp_tdebug) {
|
|
|
|
printf("%s:CTIO lun %d->iid%d flgs 0x%x sts "
|
|
|
|
"0x%x ssts 0x%x res %u\n",
|
|
|
|
mp->isp->isp_name, csio->ccb_h.target_lun,
|
|
|
|
cto->ct_iid, cto->ct_flags, cto->ct_status,
|
|
|
|
cto->ct_scsi_status, cto->ct_resid);
|
|
|
|
}
|
2000-01-15 01:54:36 +00:00
|
|
|
ISP_SWIZ_CTIO(isp, cto, cto);
|
2000-01-03 23:50:13 +00:00
|
|
|
} else {
|
|
|
|
ct_entry_t *octo = cto;
|
|
|
|
cto->ct_reserved = 0;
|
|
|
|
cto->ct_header.rqs_seqno = 0;
|
|
|
|
ISP_TDQE(mp->isp, "dma2_tgt", *mp->iptrp, cto);
|
2000-01-04 03:41:40 +00:00
|
|
|
if (isp_tdebug) {
|
|
|
|
printf("%s:CTIO lun %d->iid%d flgs 0x%x res"
|
|
|
|
" %u\n", mp->isp->isp_name,
|
|
|
|
csio->ccb_h.target_lun, cto->ct_iid,
|
|
|
|
cto->ct_flags, cto->ct_resid);
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
cto = (ct_entry_t *)
|
|
|
|
ISP_QUEUE_ENTRY(mp->isp->isp_rquest, *mp->iptrp);
|
|
|
|
*mp->iptrp =
|
|
|
|
ISP_NXT_QENTRY(*mp->iptrp, RQUEST_QUEUE_LEN);
|
|
|
|
if (*mp->iptrp == mp->optr) {
|
|
|
|
printf("%s: Queue Overflow in dma2_tgt\n",
|
|
|
|
mp->isp->isp_name);
|
|
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Fill in the new CTIO with info from the old one.
|
|
|
|
*/
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
|
|
cto->ct_header.rqs_flags = 0;
|
|
|
|
/* ct_header.rqs_seqno && ct_reserved filled in later */
|
|
|
|
cto->ct_lun = octo->ct_lun;
|
|
|
|
cto->ct_iid = octo->ct_iid;
|
|
|
|
cto->ct_reserved2 = octo->ct_reserved2;
|
|
|
|
cto->ct_tgt = octo->ct_tgt;
|
|
|
|
cto->ct_flags = octo->ct_flags & ~CT_DATAMASK;
|
|
|
|
cto->ct_status = 0;
|
|
|
|
cto->ct_scsi_status = 0;
|
|
|
|
cto->ct_tag_val = octo->ct_tag_val;
|
|
|
|
cto->ct_tag_type = octo->ct_tag_type;
|
|
|
|
cto->ct_xfrlen = 0;
|
|
|
|
cto->ct_resid = 0;
|
|
|
|
cto->ct_timeout = octo->ct_timeout;
|
|
|
|
cto->ct_seg_count = 0;
|
|
|
|
bzero(cto->ct_dataseg, sizeof (cto->ct_dataseg));
|
2000-01-15 01:54:36 +00:00
|
|
|
ISP_SWIZ_CTIO(isp, octo, octo);
|
2000-01-03 23:50:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
dma2_tgt_fc(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
|
|
{
|
|
|
|
mush_t *mp;
|
|
|
|
struct ccb_scsiio *csio;
|
|
|
|
struct isp_pcisoftc *pci;
|
|
|
|
bus_dmamap_t *dp;
|
|
|
|
ct2_entry_t *cto;
|
2000-01-15 01:54:36 +00:00
|
|
|
u_int16_t scsi_status, send_status, send_sense;
|
|
|
|
u_int32_t handle, totxfr;
|
|
|
|
u_int8_t sense[QLTM_SENSELEN];
|
2000-01-03 23:50:13 +00:00
|
|
|
int nctios;
|
2000-01-15 01:54:36 +00:00
|
|
|
int32_t resid;
|
2000-01-03 23:50:13 +00:00
|
|
|
|
|
|
|
mp = (mush_t *) arg;
|
|
|
|
if (error) {
|
|
|
|
mp->error = error;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
csio = mp->cmd_token;
|
|
|
|
cto = mp->rq;
|
|
|
|
|
|
|
|
if (nseg == 0) {
|
|
|
|
if ((cto->ct_flags & CT2_FLAG_MMASK) != CT2_FLAG_MODE1) {
|
|
|
|
printf("%s: dma2_tgt_fc, a status CTIO2 without MODE1 "
|
|
|
|
"set (0x%x)\n", mp->isp->isp_name, cto->ct_flags);
|
|
|
|
mp->error = EINVAL;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
|
|
/* ct_reserved contains the handle set by caller */
|
|
|
|
/*
|
|
|
|
* We preserve ct_lun, ct_iid, ct_rxid. We set the data
|
|
|
|
* flags to NO DATA and clear relative offset flags.
|
|
|
|
* We preserve the ct_resid and the response area.
|
|
|
|
*/
|
|
|
|
cto->ct_flags |= CT2_NO_DATA;
|
|
|
|
cto->ct_seg_count = 0;
|
|
|
|
cto->ct_reloff = 0;
|
|
|
|
ISP_TDQE(mp->isp, "dma2_tgt_fc[no data]", *mp->iptrp, cto);
|
|
|
|
if (isp_tdebug) {
|
|
|
|
scsi_status = cto->rsp.m1.ct_scsi_status;
|
|
|
|
printf("%s:CTIO2 RX_ID 0x%x lun %d->iid%d flgs 0x%x "
|
|
|
|
"sts 0x%x ssts 0x%x res %u\n", mp->isp->isp_name,
|
|
|
|
cto->ct_rxid, csio->ccb_h.target_lun, cto->ct_iid,
|
|
|
|
cto->ct_flags, cto->ct_status,
|
|
|
|
cto->rsp.m1.ct_scsi_status, cto->ct_resid);
|
|
|
|
}
|
|
|
|
ISP_SWIZ_CTIO2(isp, cto, cto);
|
2000-01-03 23:50:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
if ((cto->ct_flags & CT2_FLAG_MMASK) != CT2_FLAG_MODE0) {
|
|
|
|
printf("%s: dma2_tgt_fc, a data CTIO2 without MODE0 set "
|
|
|
|
"(0x%x)\n\n", mp->isp->isp_name, cto->ct_flags);
|
|
|
|
mp->error = EINVAL;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
nctios = nseg / ISP_RQDSEG_T2;
|
|
|
|
if (nseg % ISP_RQDSEG_T2) {
|
|
|
|
nctios++;
|
|
|
|
}
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
/*
|
2000-01-15 01:54:36 +00:00
|
|
|
* Save the handle, status, reloff, and residual. We'll reinsert the
|
|
|
|
* handle into the last CTIO2 we're going to send, and reinsert status
|
|
|
|
* and residual (and possibly sense data) if that's to be sent as well.
|
|
|
|
*
|
|
|
|
* We preserve ct_reloff and adjust it for each data CTIO2 we send past
|
|
|
|
* the first one. This is needed so that the FCP DATA IUs being sent
|
|
|
|
* out have the correct offset (they can arrive at the other end out
|
|
|
|
* of order).
|
2000-01-03 23:50:13 +00:00
|
|
|
*/
|
2000-01-15 01:54:36 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
handle = cto->ct_reserved;
|
|
|
|
cto->ct_reserved = 0;
|
2000-01-15 01:54:36 +00:00
|
|
|
|
|
|
|
if ((send_status = (cto->ct_flags & CT2_SENDSTATUS)) != 0) {
|
|
|
|
cto->ct_flags &= ~CT2_SENDSTATUS;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Preserve residual.
|
|
|
|
*/
|
|
|
|
resid = cto->ct_resid;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Save actual SCSI status. We'll reinsert the
|
|
|
|
* CT2_SNSLEN_VALID later if appropriate.
|
|
|
|
*/
|
|
|
|
scsi_status = cto->rsp.m0.ct_scsi_status & 0xff;
|
|
|
|
send_sense = cto->rsp.m0.ct_scsi_status & CT2_SNSLEN_VALID;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we're sending status and have a CHECK CONDTION and
|
|
|
|
* have sense data, we send one more CTIO2 with just the
|
|
|
|
* status and sense data. The upper layers have stashed
|
|
|
|
* the sense data in the dataseg structure for us.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if ((scsi_status & 0xf) == SCSI_STATUS_CHECK_COND &&
|
|
|
|
send_sense) {
|
|
|
|
bcopy(cto->rsp.m0.ct_dataseg, sense, QLTM_SENSELEN);
|
|
|
|
nctios++;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
scsi_status = send_sense = resid = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
totxfr = cto->ct_resid = 0;
|
2000-01-03 23:50:13 +00:00
|
|
|
cto->rsp.m0.ct_scsi_status = 0;
|
2000-01-15 01:54:36 +00:00
|
|
|
bzero(&cto->rsp, sizeof (cto->rsp));
|
2000-01-03 23:50:13 +00:00
|
|
|
|
|
|
|
pci = (struct isp_pcisoftc *)mp->isp;
|
|
|
|
dp = &pci->dmaps[handle - 1];
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
|
|
} else {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
|
|
}
|
|
|
|
|
|
|
|
while (nctios--) {
|
|
|
|
int seg, seglim;
|
|
|
|
|
|
|
|
seglim = nseg;
|
2000-01-15 01:54:36 +00:00
|
|
|
if (seglim) {
|
|
|
|
if (seglim > ISP_RQDSEG_T2)
|
|
|
|
seglim = ISP_RQDSEG_T2;
|
|
|
|
|
|
|
|
for (seg = 0; seg < seglim; seg++) {
|
|
|
|
cto->rsp.m0.ct_dataseg[seg].ds_base =
|
|
|
|
dm_segs->ds_addr;
|
|
|
|
cto->rsp.m0.ct_dataseg[seg].ds_count =
|
|
|
|
dm_segs->ds_len;
|
|
|
|
cto->rsp.m0.ct_xfrlen += dm_segs->ds_len;
|
|
|
|
totxfr += dm_segs->ds_len;
|
|
|
|
dm_segs++;
|
|
|
|
}
|
|
|
|
cto->ct_seg_count = seg;
|
2000-01-03 23:50:13 +00:00
|
|
|
} else {
|
2000-01-15 01:54:36 +00:00
|
|
|
/*
|
|
|
|
* This case should only happen when we're sending a
|
|
|
|
* synthesized MODE1 final status with sense data.
|
|
|
|
*/
|
|
|
|
if (send_sense == 0) {
|
|
|
|
printf("%s: dma2_tgt_fc ran out of segments, "
|
|
|
|
"no SENSE DATA\n", mp->isp->isp_name);
|
|
|
|
mp->error = EINVAL;
|
|
|
|
return;
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
}
|
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
/*
|
|
|
|
* At this point, the fields ct_lun, ct_iid, ct_rxid,
|
|
|
|
* ct_timeout have been carried over unchanged from what
|
|
|
|
* our caller had set.
|
|
|
|
*
|
|
|
|
* The field ct_reloff is either what the caller set, or
|
|
|
|
* what we've added to below.
|
|
|
|
*
|
|
|
|
* The dataseg fields and the seg_count fields we just got
|
|
|
|
* through setting. The data direction we've preserved all
|
|
|
|
* along and only clear it if we're sending a MODE1 status
|
|
|
|
* as the last CTIO.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
if (nctios == 0) {
|
2000-01-15 01:54:36 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
/*
|
2000-01-15 01:54:36 +00:00
|
|
|
* We're the last in a sequence of CTIO2s, so mark this
|
|
|
|
* CTIO2 and save the handle to the CCB such that when
|
|
|
|
* this CTIO2 completes we can free dma resources and
|
2000-01-03 23:50:13 +00:00
|
|
|
* do whatever else we need to do to finish the rest
|
|
|
|
* of the command.
|
|
|
|
*/
|
2000-01-15 01:54:36 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
cto->ct_reserved = handle;
|
2000-01-15 01:54:36 +00:00
|
|
|
cto->ct_header.rqs_seqno = 1;
|
|
|
|
|
|
|
|
if (send_status) {
|
|
|
|
if (send_sense) {
|
|
|
|
bcopy(sense, cto->rsp.m1.ct_resp,
|
|
|
|
QLTM_SENSELEN);
|
|
|
|
cto->rsp.m1.ct_senselen =
|
|
|
|
QLTM_SENSELEN;
|
|
|
|
scsi_status |= CT2_SNSLEN_VALID;
|
|
|
|
cto->rsp.m1.ct_scsi_status =
|
|
|
|
scsi_status;
|
|
|
|
cto->ct_flags &= CT2_FLAG_MMASK;
|
|
|
|
cto->ct_flags |= CT2_FLAG_MODE1 |
|
|
|
|
CT2_NO_DATA| CT2_SENDSTATUS;
|
|
|
|
} else {
|
|
|
|
cto->rsp.m0.ct_scsi_status =
|
|
|
|
scsi_status;
|
|
|
|
cto->ct_flags |= CT2_SENDSTATUS;
|
|
|
|
}
|
|
|
|
cto->ct_resid = resid - totxfr;
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
ISP_TDQE(mp->isp, "last dma2_tgt_fc", *mp->iptrp, cto);
|
2000-01-04 03:41:40 +00:00
|
|
|
if (isp_tdebug) {
|
2000-01-15 01:54:36 +00:00
|
|
|
printf("%s:CTIO2 RX_ID 0x%x lun %d->iid%d flgs"
|
|
|
|
"0x%x sts 0x%x ssts 0x%x res %u\n",
|
|
|
|
mp->isp->isp_name, cto->ct_rxid,
|
|
|
|
csio->ccb_h.target_lun, (int) cto->ct_iid,
|
2000-01-04 03:41:40 +00:00
|
|
|
cto->ct_flags, cto->ct_status,
|
2000-01-15 01:54:36 +00:00
|
|
|
cto->rsp.m1.ct_scsi_status, cto->ct_resid);
|
2000-01-04 03:41:40 +00:00
|
|
|
}
|
2000-01-15 01:54:36 +00:00
|
|
|
ISP_SWIZ_CTIO2(isp, cto, cto);
|
2000-01-03 23:50:13 +00:00
|
|
|
} else {
|
|
|
|
ct2_entry_t *octo = cto;
|
2000-01-15 01:54:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure handle fields are clean
|
|
|
|
*/
|
2000-01-03 23:50:13 +00:00
|
|
|
cto->ct_reserved = 0;
|
|
|
|
cto->ct_header.rqs_seqno = 0;
|
2000-01-15 01:54:36 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
ISP_TDQE(mp->isp, "dma2_tgt_fc", *mp->iptrp, cto);
|
2000-01-04 03:41:40 +00:00
|
|
|
if (isp_tdebug) {
|
2000-01-15 01:54:36 +00:00
|
|
|
printf("%s:CTIO2 RX_ID 0x%x lun %d->iid%d flgs"
|
|
|
|
"0x%x\n", mp->isp->isp_name, cto->ct_rxid,
|
|
|
|
csio->ccb_h.target_lun, (int) cto->ct_iid,
|
|
|
|
cto->ct_flags);
|
2000-01-04 03:41:40 +00:00
|
|
|
}
|
2000-01-15 01:54:36 +00:00
|
|
|
/*
|
|
|
|
* Get a new CTIO2
|
|
|
|
*/
|
2000-01-03 23:50:13 +00:00
|
|
|
cto = (ct2_entry_t *)
|
|
|
|
ISP_QUEUE_ENTRY(mp->isp->isp_rquest, *mp->iptrp);
|
|
|
|
*mp->iptrp =
|
|
|
|
ISP_NXT_QENTRY(*mp->iptrp, RQUEST_QUEUE_LEN);
|
|
|
|
if (*mp->iptrp == mp->optr) {
|
|
|
|
printf("%s: Queue Overflow in dma2_tgt_fc\n",
|
|
|
|
mp->isp->isp_name);
|
|
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
|
|
return;
|
|
|
|
}
|
2000-01-15 01:54:36 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
/*
|
2000-01-15 01:54:36 +00:00
|
|
|
* Fill in the new CTIO2 with info from the old one.
|
2000-01-03 23:50:13 +00:00
|
|
|
*/
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
|
|
cto->ct_header.rqs_flags = 0;
|
2000-01-15 01:54:36 +00:00
|
|
|
/* ct_header.rqs_seqno && ct_reserved done later */
|
2000-01-03 23:50:13 +00:00
|
|
|
cto->ct_lun = octo->ct_lun;
|
|
|
|
cto->ct_iid = octo->ct_iid;
|
|
|
|
cto->ct_rxid = octo->ct_rxid;
|
2000-01-15 01:54:36 +00:00
|
|
|
cto->ct_flags = octo->ct_flags;
|
2000-01-03 23:50:13 +00:00
|
|
|
cto->ct_status = 0;
|
|
|
|
cto->ct_resid = 0;
|
|
|
|
cto->ct_timeout = octo->ct_timeout;
|
|
|
|
cto->ct_seg_count = 0;
|
2000-01-15 01:54:36 +00:00
|
|
|
/*
|
|
|
|
* Adjust the new relative offset by the amount which
|
|
|
|
* is recorded in the data segment of the old CTIO2 we
|
|
|
|
* just finished filling out.
|
|
|
|
*/
|
|
|
|
cto->ct_reloff += octo->rsp.m0.ct_xfrlen;
|
2000-01-03 23:50:13 +00:00
|
|
|
bzero(&cto->rsp, sizeof (cto->rsp));
|
2000-01-15 01:54:36 +00:00
|
|
|
ISP_SWIZ_CTIO2(isp, cto, cto);
|
2000-01-03 23:50:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static void dma2 __P((void *, bus_dma_segment_t *, int, int));
|
|
|
|
|
1998-09-15 10:06:23 +00:00
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
dma2(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
|
|
|
mush_t *mp;
|
2000-01-03 23:50:13 +00:00
|
|
|
struct ccb_scsiio *csio;
|
1998-09-15 10:06:23 +00:00
|
|
|
struct isp_pcisoftc *pci;
|
|
|
|
bus_dmamap_t *dp;
|
|
|
|
bus_dma_segment_t *eseg;
|
|
|
|
ispreq_t *rq;
|
|
|
|
ispcontreq_t *crq;
|
2000-01-03 23:50:13 +00:00
|
|
|
int seglim, datalen;
|
1998-09-15 10:06:23 +00:00
|
|
|
|
|
|
|
mp = (mush_t *) arg;
|
|
|
|
if (error) {
|
|
|
|
mp->error = error;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nseg < 1) {
|
2000-01-03 23:50:13 +00:00
|
|
|
printf("%s: bad segment count (%d)\n", mp->isp->isp_name, nseg);
|
1998-09-15 10:06:23 +00:00
|
|
|
mp->error = EFAULT;
|
|
|
|
return;
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
csio = mp->cmd_token;
|
1998-09-15 10:06:23 +00:00
|
|
|
rq = mp->rq;
|
2000-01-03 23:50:13 +00:00
|
|
|
pci = (struct isp_pcisoftc *)mp->isp;
|
1998-09-15 10:06:23 +00:00
|
|
|
dp = &pci->dmaps[rq->req_handle - 1];
|
1999-10-17 19:03:11 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
|
|
} else {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
|
|
}
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
datalen = XS_XFRLEN(csio);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We're passed an initial partially filled in entry that
|
|
|
|
* has most fields filled in except for data transfer
|
|
|
|
* related values.
|
|
|
|
*
|
|
|
|
* Our job is to fill in the initial request queue entry and
|
|
|
|
* then to start allocating and filling in continuation entries
|
|
|
|
* until we've covered the entire transfer.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (IS_FC(mp->isp)) {
|
1998-09-15 10:06:23 +00:00
|
|
|
seglim = ISP_RQDSEG_T2;
|
|
|
|
((ispreqt2_t *)rq)->req_totalcnt = datalen;
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
|
|
((ispreqt2_t *)rq)->req_flags |= REQFLAG_DATA_IN;
|
|
|
|
} else {
|
|
|
|
((ispreqt2_t *)rq)->req_flags |= REQFLAG_DATA_OUT;
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
} else {
|
2000-02-15 00:50:01 +00:00
|
|
|
if (csio->cdb_len > 12) {
|
|
|
|
seglim = 0;
|
|
|
|
} else {
|
|
|
|
seglim = ISP_RQDSEG;
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
|
|
rq->req_flags |= REQFLAG_DATA_IN;
|
|
|
|
} else {
|
|
|
|
rq->req_flags |= REQFLAG_DATA_OUT;
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
eseg = dm_segs + nseg;
|
|
|
|
|
|
|
|
while (datalen != 0 && rq->req_seg_count < seglim && dm_segs != eseg) {
|
2000-01-03 23:50:13 +00:00
|
|
|
if (IS_FC(mp->isp)) {
|
1998-09-15 10:06:23 +00:00
|
|
|
ispreqt2_t *rq2 = (ispreqt2_t *)rq;
|
|
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_base =
|
|
|
|
dm_segs->ds_addr;
|
|
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_count =
|
|
|
|
dm_segs->ds_len;
|
|
|
|
} else {
|
|
|
|
rq->req_dataseg[rq->req_seg_count].ds_base =
|
|
|
|
dm_segs->ds_addr;
|
|
|
|
rq->req_dataseg[rq->req_seg_count].ds_count =
|
|
|
|
dm_segs->ds_len;
|
|
|
|
}
|
|
|
|
datalen -= dm_segs->ds_len;
|
|
|
|
#if 0
|
2000-01-03 23:50:13 +00:00
|
|
|
if (IS_FC(mp->isp)) {
|
1998-09-15 10:06:23 +00:00
|
|
|
ispreqt2_t *rq2 = (ispreqt2_t *)rq;
|
|
|
|
printf("%s: seg0[%d] cnt 0x%x paddr 0x%08x\n",
|
2000-01-03 23:50:13 +00:00
|
|
|
mp->isp->isp_name, rq->req_seg_count,
|
1998-09-15 10:06:23 +00:00
|
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_count,
|
|
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_base);
|
|
|
|
} else {
|
|
|
|
printf("%s: seg0[%d] cnt 0x%x paddr 0x%08x\n",
|
2000-01-03 23:50:13 +00:00
|
|
|
mp->isp->isp_name, rq->req_seg_count,
|
1998-09-15 10:06:23 +00:00
|
|
|
rq->req_dataseg[rq->req_seg_count].ds_count,
|
|
|
|
rq->req_dataseg[rq->req_seg_count].ds_base);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
rq->req_seg_count++;
|
|
|
|
dm_segs++;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (datalen > 0 && dm_segs != eseg) {
|
2000-01-03 23:50:13 +00:00
|
|
|
crq = (ispcontreq_t *)
|
|
|
|
ISP_QUEUE_ENTRY(mp->isp->isp_rquest, *mp->iptrp);
|
|
|
|
*mp->iptrp = ISP_NXT_QENTRY(*mp->iptrp, RQUEST_QUEUE_LEN);
|
|
|
|
if (*mp->iptrp == mp->optr) {
|
1998-09-17 21:11:21 +00:00
|
|
|
#if 0
|
2000-01-03 23:50:13 +00:00
|
|
|
printf("%s: Request Queue Overflow++\n",
|
|
|
|
mp->isp->isp_name);
|
1998-09-17 21:11:21 +00:00
|
|
|
#endif
|
|
|
|
mp->error = MUSHERR_NOQENTRIES;
|
1998-09-15 10:06:23 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
rq->req_header.rqs_entry_count++;
|
|
|
|
bzero((void *)crq, sizeof (*crq));
|
|
|
|
crq->req_header.rqs_entry_count = 1;
|
|
|
|
crq->req_header.rqs_entry_type = RQSTYPE_DATASEG;
|
|
|
|
|
|
|
|
seglim = 0;
|
|
|
|
while (datalen > 0 && seglim < ISP_CDSEG && dm_segs != eseg) {
|
|
|
|
crq->req_dataseg[seglim].ds_base =
|
|
|
|
dm_segs->ds_addr;
|
|
|
|
crq->req_dataseg[seglim].ds_count =
|
|
|
|
dm_segs->ds_len;
|
|
|
|
#if 0
|
|
|
|
printf("%s: seg%d[%d] cnt 0x%x paddr 0x%08x\n",
|
2000-01-03 23:50:13 +00:00
|
|
|
mp->isp->isp_name, rq->req_header.rqs_entry_count-1,
|
1998-09-15 10:06:23 +00:00
|
|
|
seglim, crq->req_dataseg[seglim].ds_count,
|
|
|
|
crq->req_dataseg[seglim].ds_base);
|
|
|
|
#endif
|
|
|
|
rq->req_seg_count++;
|
|
|
|
dm_segs++;
|
|
|
|
seglim++;
|
|
|
|
datalen -= dm_segs->ds_len;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2000-01-03 23:50:13 +00:00
|
|
|
isp_pci_dmasetup(struct ispsoftc *isp, struct ccb_scsiio *csio, ispreq_t *rq,
|
1999-11-21 02:56:17 +00:00
|
|
|
u_int16_t *iptrp, u_int16_t optr)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pci = (struct isp_pcisoftc *)isp;
|
1999-08-16 19:52:29 +00:00
|
|
|
bus_dmamap_t *dp = NULL;
|
1998-09-15 10:06:23 +00:00
|
|
|
mush_t mush, *mp;
|
2000-01-03 23:50:13 +00:00
|
|
|
void (*eptr) __P((void *, bus_dma_segment_t *, int, int));
|
1998-09-15 10:06:23 +00:00
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
#ifdef ISP_TARGET_MODE
|
|
|
|
if (csio->ccb_h.func_code == XPT_CONT_TARGET_IO) {
|
|
|
|
if (IS_FC(isp)) {
|
|
|
|
eptr = dma2_tgt_fc;
|
|
|
|
} else {
|
|
|
|
eptr = dma2_tgt;
|
|
|
|
}
|
2000-01-15 01:54:36 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) {
|
|
|
|
rq->req_seg_count = 1;
|
|
|
|
mp = &mush;
|
|
|
|
mp->isp = isp;
|
|
|
|
mp->cmd_token = csio;
|
|
|
|
mp->rq = rq;
|
|
|
|
mp->iptrp = iptrp;
|
|
|
|
mp->optr = optr;
|
|
|
|
mp->error = 0;
|
|
|
|
(*eptr)(mp, NULL, 0, 0);
|
|
|
|
goto exit;
|
|
|
|
}
|
2000-01-03 23:50:13 +00:00
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
eptr = dma2;
|
1998-09-15 10:06:23 +00:00
|
|
|
|
2000-01-15 01:54:36 +00:00
|
|
|
/*
|
|
|
|
* NB: if we need to do request queue entry swizzling,
|
|
|
|
* NB: this is where it would need to be done for cmds
|
|
|
|
* NB: that move no data. For commands that move data,
|
|
|
|
* NB: swizzling would take place in those functions.
|
|
|
|
*/
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) {
|
|
|
|
rq->req_seg_count = 1;
|
|
|
|
return (CMD_QUEUED);
|
|
|
|
}
|
1998-09-15 10:06:23 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Do a virtual grapevine step to collect info for
|
1998-09-17 21:11:21 +00:00
|
|
|
* the callback dma allocation that we have to use...
|
1998-09-15 10:06:23 +00:00
|
|
|
*/
|
|
|
|
mp = &mush;
|
|
|
|
mp->isp = isp;
|
2000-01-03 23:50:13 +00:00
|
|
|
mp->cmd_token = csio;
|
1998-09-15 10:06:23 +00:00
|
|
|
mp->rq = rq;
|
|
|
|
mp->iptrp = iptrp;
|
|
|
|
mp->optr = optr;
|
|
|
|
mp->error = 0;
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
|
|
|
|
if ((csio->ccb_h.flags & CAM_DATA_PHYS) == 0) {
|
1998-09-17 21:11:21 +00:00
|
|
|
int error, s;
|
1999-08-16 19:52:29 +00:00
|
|
|
dp = &pci->dmaps[rq->req_handle - 1];
|
1998-09-15 10:06:23 +00:00
|
|
|
s = splsoftvm();
|
|
|
|
error = bus_dmamap_load(pci->parent_dmat, *dp,
|
2000-01-03 23:50:13 +00:00
|
|
|
csio->data_ptr, csio->dxfer_len, eptr, mp, 0);
|
1998-09-15 10:06:23 +00:00
|
|
|
if (error == EINPROGRESS) {
|
|
|
|
bus_dmamap_unload(pci->parent_dmat, *dp);
|
|
|
|
mp->error = EINVAL;
|
1998-09-17 21:11:21 +00:00
|
|
|
printf("%s: deferred dma allocation not "
|
|
|
|
"supported\n", isp->isp_name);
|
1998-09-15 10:06:23 +00:00
|
|
|
} else if (error && mp->error == 0) {
|
1999-08-16 19:52:29 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
printf("%s: error %d in dma mapping code\n",
|
|
|
|
isp->isp_name, error);
|
|
|
|
#endif
|
1998-09-15 10:06:23 +00:00
|
|
|
mp->error = error;
|
|
|
|
}
|
1998-09-17 21:11:21 +00:00
|
|
|
splx(s);
|
1998-09-15 10:06:23 +00:00
|
|
|
} else {
|
|
|
|
/* Pointer to physical buffer */
|
1999-03-17 05:07:18 +00:00
|
|
|
struct bus_dma_segment seg;
|
1998-09-15 10:06:23 +00:00
|
|
|
seg.ds_addr = (bus_addr_t)csio->data_ptr;
|
|
|
|
seg.ds_len = csio->dxfer_len;
|
2000-01-03 23:50:13 +00:00
|
|
|
(*eptr)(mp, &seg, 1, 0);
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
struct bus_dma_segment *segs;
|
|
|
|
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.flags & CAM_DATA_PHYS) != 0) {
|
1998-09-15 10:06:23 +00:00
|
|
|
printf("%s: Physical segment pointers unsupported",
|
|
|
|
isp->isp_name);
|
|
|
|
mp->error = EINVAL;
|
2000-01-03 23:50:13 +00:00
|
|
|
} else if ((csio->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
|
1998-09-15 10:06:23 +00:00
|
|
|
printf("%s: Virtual segment addresses unsupported",
|
|
|
|
isp->isp_name);
|
|
|
|
mp->error = EINVAL;
|
|
|
|
} else {
|
|
|
|
/* Just use the segments provided */
|
|
|
|
segs = (struct bus_dma_segment *) csio->data_ptr;
|
2000-01-03 23:50:13 +00:00
|
|
|
(*eptr)(mp, segs, csio->sglist_cnt, 0);
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
}
|
2000-01-15 07:06:44 +00:00
|
|
|
#ifdef ISP_TARGET_MODE
|
2000-01-15 01:54:36 +00:00
|
|
|
exit:
|
2000-01-15 07:06:44 +00:00
|
|
|
#endif
|
1998-09-15 10:06:23 +00:00
|
|
|
if (mp->error) {
|
1998-09-17 21:11:21 +00:00
|
|
|
int retval = CMD_COMPLETE;
|
|
|
|
if (mp->error == MUSHERR_NOQENTRIES) {
|
|
|
|
retval = CMD_EAGAIN;
|
|
|
|
} else if (mp->error == EFBIG) {
|
1999-08-16 19:52:29 +00:00
|
|
|
XS_SETERR(csio, CAM_REQ_TOO_BIG);
|
1998-09-15 10:06:23 +00:00
|
|
|
} else if (mp->error == EINVAL) {
|
1999-08-16 19:52:29 +00:00
|
|
|
XS_SETERR(csio, CAM_REQ_INVALID);
|
1998-09-15 10:06:23 +00:00
|
|
|
} else {
|
1999-08-16 19:52:29 +00:00
|
|
|
XS_SETERR(csio, CAM_UNREC_HBA_ERROR);
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
1998-09-17 21:11:21 +00:00
|
|
|
return (retval);
|
|
|
|
} else {
|
1999-08-16 19:52:29 +00:00
|
|
|
/*
|
|
|
|
* Check to see if we weren't cancelled while sleeping on
|
|
|
|
* getting DMA resources...
|
|
|
|
*/
|
2000-01-03 23:50:13 +00:00
|
|
|
if ((csio->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
|
1999-08-16 19:52:29 +00:00
|
|
|
if (dp) {
|
|
|
|
bus_dmamap_unload(pci->parent_dmat, *dp);
|
|
|
|
}
|
|
|
|
return (CMD_COMPLETE);
|
|
|
|
}
|
1998-09-17 21:11:21 +00:00
|
|
|
return (CMD_QUEUED);
|
1998-09-15 10:06:23 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
1999-10-17 19:03:11 +00:00
|
|
|
isp_pci_dmateardown(struct ispsoftc *isp, ISP_SCSI_XFER_T *xs, u_int32_t handle)
|
1998-09-15 10:06:23 +00:00
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pci = (struct isp_pcisoftc *)isp;
|
1999-10-17 19:03:11 +00:00
|
|
|
bus_dmamap_t *dp = &pci->dmaps[handle - 1];
|
|
|
|
KASSERT((handle > 0 && handle <= isp->isp_maxcmds),
|
|
|
|
("bad handle in isp_pci_dmateardonw"));
|
|
|
|
if ((xs->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
1998-09-15 10:06:23 +00:00
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_POSTREAD);
|
|
|
|
} else {
|
|
|
|
bus_dmamap_sync(pci->parent_dmat, *dp, BUS_DMASYNC_POSTWRITE);
|
|
|
|
}
|
|
|
|
bus_dmamap_unload(pci->parent_dmat, *dp);
|
|
|
|
}
|
|
|
|
|
1998-04-22 18:12:29 +00:00
|
|
|
|
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_pci_reset1(struct ispsoftc *isp)
|
1998-04-22 18:12:29 +00:00
|
|
|
{
|
|
|
|
/* Make sure the BIOS is disabled */
|
|
|
|
isp_pci_wr_reg(isp, HCCR, PCI_HCCR_CMD_BIOS);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
1998-12-28 19:24:23 +00:00
|
|
|
isp_pci_dumpregs(struct ispsoftc *isp)
|
1998-04-22 18:12:29 +00:00
|
|
|
{
|
|
|
|
struct isp_pcisoftc *pci = (struct isp_pcisoftc *)isp;
|
2000-02-11 19:45:17 +00:00
|
|
|
printf("%s: PCI Status Command/Status=%x\n", pci->pci_isp.isp_name,
|
|
|
|
pci_read_config(pci->pci_dev, PCIR_COMMAND, 1));
|
1998-04-22 18:12:29 +00:00
|
|
|
}
|