freebsd-nq/sys/netinet/tcp_pcap.c

446 lines
12 KiB
C
Raw Normal View History

There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
/*-
* Copyright (c) 2015
* Jonathan Looney. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/queue.h>
#include <sys/param.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/eventhandler.h>
#include <machine/atomic.h>
#include <netinet/tcp_var.h>
#include <netinet/tcp_pcap.h>
#define M_LEADINGSPACE_NOWRITE(m) \
((m)->m_data - M_START(m))
int tcp_pcap_aggressive_free = 1;
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
static int tcp_pcap_clusters_referenced_cur = 0;
static int tcp_pcap_clusters_referenced_max = 0;
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_aggressive_free,
CTLFLAG_RW, &tcp_pcap_aggressive_free, 0,
"Free saved packets when the memory system comes under pressure");
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_clusters_referenced_cur,
CTLFLAG_RD, &tcp_pcap_clusters_referenced_cur, 0,
"Number of clusters currently referenced on TCP PCAP queues");
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_clusters_referenced_max,
CTLFLAG_RW, &tcp_pcap_clusters_referenced_max, 0,
"Maximum number of clusters allowed to be referenced on TCP PCAP "
"queues");
static int tcp_pcap_alloc_reuse_ext = 0;
static int tcp_pcap_alloc_reuse_mbuf = 0;
static int tcp_pcap_alloc_new_mbuf = 0;
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_alloc_reuse_ext,
CTLFLAG_RD, &tcp_pcap_alloc_reuse_ext, 0,
"Number of mbufs with external storage reused for the TCP PCAP "
"functionality");
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_alloc_reuse_mbuf,
CTLFLAG_RD, &tcp_pcap_alloc_reuse_mbuf, 0,
"Number of mbufs with internal storage reused for the TCP PCAP "
"functionality");
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_alloc_new_mbuf,
CTLFLAG_RD, &tcp_pcap_alloc_new_mbuf, 0,
"Number of new mbufs allocated for the TCP PCAP functionality");
VNET_DEFINE(int, tcp_pcap_packets) = 0;
#define V_tcp_pcap_packets VNET(tcp_pcap_packets)
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tcp_pcap_packets,
CTLFLAG_RW, &VNET_NAME(tcp_pcap_packets), 0,
"Default number of packets saved per direction per TCPCB");
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
/* Initialize the values. */
static void
tcp_pcap_max_set(void)
{
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
tcp_pcap_clusters_referenced_max = nmbclusters / 4;
}
void
tcp_pcap_init(void)
{
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
tcp_pcap_max_set();
EVENTHANDLER_REGISTER(nmbclusters_change, tcp_pcap_max_set,
NULL, EVENTHANDLER_PRI_ANY);
}
/*
* If we are below the maximum allowed cluster references,
* increment the reference count and return TRUE. Otherwise,
* leave the reference count alone and return FALSE.
*/
static __inline bool
tcp_pcap_take_cluster_reference(void)
{
if (atomic_fetchadd_int(&tcp_pcap_clusters_referenced_cur, 1) >=
tcp_pcap_clusters_referenced_max) {
atomic_add_int(&tcp_pcap_clusters_referenced_cur, -1);
return FALSE;
}
return TRUE;
}
/*
* For all the external entries in m, apply the given adjustment.
* This can be used to adjust the counter when an mbuf chain is
* copied or freed.
*/
static __inline void
tcp_pcap_adj_cluster_reference(struct mbuf *m, int adj)
{
while (m) {
if (m->m_flags & M_EXT)
atomic_add_int(&tcp_pcap_clusters_referenced_cur, adj);
m = m->m_next;
}
}
/*
* Free all mbufs in a chain, decrementing the reference count as
* necessary.
*
* Functions in this file should use this instead of m_freem() when
* they are freeing mbuf chains that may contain clusters that were
* already included in tcp_pcap_clusters_referenced_cur.
*/
static void
tcp_pcap_m_freem(struct mbuf *mb)
{
while (mb != NULL) {
if (mb->m_flags & M_EXT)
atomic_subtract_int(&tcp_pcap_clusters_referenced_cur,
1);
mb = m_free(mb);
}
}
/*
* Copy data from m to n, where n cannot fit all the data we might
* want from m.
*
* Prioritize data like this:
* 1. TCP header
* 2. IP header
* 3. Data
*/
static void
tcp_pcap_copy_bestfit(struct tcphdr *th, struct mbuf *m, struct mbuf *n)
{
struct mbuf *m_cur = m;
int bytes_to_copy=0, trailing_data, skip=0, tcp_off;
/* Below, we assume these will be non-NULL. */
KASSERT(th, ("%s: called with th == NULL", __func__));
KASSERT(m, ("%s: called with m == NULL", __func__));
KASSERT(n, ("%s: called with n == NULL", __func__));
/* We assume this initialization occurred elsewhere. */
KASSERT(n->m_len == 0, ("%s: called with n->m_len=%d (expected 0)",
__func__, n->m_len));
KASSERT(n->m_data == M_START(n),
("%s: called with n->m_data != M_START(n)", __func__));
/*
* Calculate the size of the TCP header. We use this often
* enough that it is worth just calculating at the start.
*/
tcp_off = th->th_off << 2;
/* Trim off leading empty mbufs. */
while (m && m->m_len == 0)
m = m->m_next;
if (m) {
m_cur = m;
}
else {
/*
* No data? Highly unusual. We would expect to at
* least see a TCP header in the mbuf.
* As we have a pointer to the TCP header, I guess
* we should just copy that. (???)
*/
fallback:
bytes_to_copy = tcp_off;
if (bytes_to_copy > M_SIZE(n))
bytes_to_copy = M_SIZE(n);
bcopy(th, n->m_data, bytes_to_copy);
n->m_len = bytes_to_copy;
return;
}
/*
* Find TCP header. Record the total number of bytes up to,
* and including, the TCP header.
*/
while (m_cur) {
if ((caddr_t) th >= (caddr_t) m_cur->m_data &&
(caddr_t) th < (caddr_t) (m_cur->m_data + m_cur->m_len))
break;
bytes_to_copy += m_cur->m_len;
m_cur = m_cur->m_next;
}
if (m_cur)
bytes_to_copy += (caddr_t) th - (caddr_t) m_cur->m_data;
else
goto fallback;
bytes_to_copy += tcp_off;
/*
* If we already want to copy more bytes than we can hold
* in the destination mbuf, skip leading bytes and copy
* what we can.
*
* Otherwise, consider trailing data.
*/
if (bytes_to_copy > M_SIZE(n)) {
skip = bytes_to_copy - M_SIZE(n);
bytes_to_copy = M_SIZE(n);
}
else {
/*
* Determine how much trailing data is in the chain.
* We start with the length of this mbuf (the one
* containing th) and subtract the size of the TCP
* header (tcp_off) and the size of the data prior
* to th (th - m_cur->m_data).
*
* This *should not* be negative, as the TCP code
* should put the whole TCP header in a single
* mbuf. But, it isn't a problem if it is. We will
* simple work off our negative balance as we look
* at subsequent mbufs.
*/
trailing_data = m_cur->m_len - tcp_off;
trailing_data -= (caddr_t) th - (caddr_t) m_cur->m_data;
m_cur = m_cur->m_next;
while (m_cur) {
trailing_data += m_cur->m_len;
m_cur = m_cur->m_next;
}
if ((bytes_to_copy + trailing_data) > M_SIZE(n))
bytes_to_copy = M_SIZE(n);
else
bytes_to_copy += trailing_data;
}
m_copydata(m, skip, bytes_to_copy, n->m_data);
n->m_len = bytes_to_copy;
}
void
tcp_pcap_add(struct tcphdr *th, struct mbuf *m, struct mbufq *queue)
{
struct mbuf *n = NULL, *mhead;
KASSERT(th, ("%s: called with th == NULL", __func__));
KASSERT(m, ("%s: called with m == NULL", __func__));
KASSERT(queue, ("%s: called with queue == NULL", __func__));
/* We only care about data packets. */
while (m && m->m_type != MT_DATA)
m = m->m_next;
/* We only need to do something if we still have an mbuf. */
if (!m)
return;
/* If we are not saving mbufs, return now. */
if (queue->mq_maxlen == 0)
return;
/*
* Check to see if we will need to recycle mbufs.
*
* If we need to get rid of mbufs to stay below
* our packet count, try to reuse the mbuf. Once
* we already have a new mbuf (n), then we can
* simply free subsequent mbufs.
*
* Note that most of the logic in here is to deal
* with the reuse. If we are fine with constant
* mbuf allocs/deallocs, we could ditch this logic.
* But, it only seems to make sense to reuse
* mbufs we already have.
*/
while (mbufq_full(queue)) {
mhead = mbufq_dequeue(queue);
if (n) {
tcp_pcap_m_freem(mhead);
}
else {
/*
* If this held an external cluster, try to
* detach the cluster. But, if we held the
* last reference, go through the normal
* free-ing process.
*/
if (mhead->m_flags & M_EXT) {
switch (mhead->m_ext.ext_type) {
case EXT_SFBUF:
/* Don't mess around with these. */
tcp_pcap_m_freem(mhead);
continue;
default:
if (atomic_fetchadd_int(
mhead->m_ext.ext_cnt, -1) == 1)
{
/*
* We held the last reference
* on this cluster. Restore
* the reference count and put
* it back in the pool.
*/
*(mhead->m_ext.ext_cnt) = 1;
tcp_pcap_m_freem(mhead);
continue;
}
/*
* We were able to cleanly free the
* reference.
*/
atomic_subtract_int(
&tcp_pcap_clusters_referenced_cur,
1);
tcp_pcap_alloc_reuse_ext++;
break;
}
}
else {
tcp_pcap_alloc_reuse_mbuf++;
}
n = mhead;
tcp_pcap_m_freem(n->m_next);
m_init(n, M_NOWAIT, MT_DATA, 0);
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
}
}
/* Check to see if we need to get a new mbuf. */
if (!n) {
if (!(n = m_get(M_NOWAIT, MT_DATA)))
return;
tcp_pcap_alloc_new_mbuf++;
}
/*
* What are we dealing with? If a cluster, attach it. Otherwise,
* try to copy the data from the beginning of the mbuf to the
* end of data. (There may be data between the start of the data
* area and the current data pointer. We want to get this, because
* it may contain header information that is useful.)
* In cases where that isn't possible, settle for what we can
* get.
*/
if ((m->m_flags & M_EXT) && tcp_pcap_take_cluster_reference()) {
n->m_data = m->m_data;
n->m_len = m->m_len;
mb_dupcl(n, m);
}
else if (((m->m_data + m->m_len) - M_START(m)) <= M_SIZE(n)) {
/*
* At this point, n is guaranteed to be a normal mbuf
* with no cluster and no packet header. Because the
* logic in this code block requires this, the assert
* is here to catch any instances where someone
* changes the logic to invalidate that assumption.
*/
KASSERT((n->m_flags & (M_EXT | M_PKTHDR)) == 0,
("%s: Unexpected flags (%#x) for mbuf",
__func__, n->m_flags));
n->m_data = n->m_dat + M_LEADINGSPACE_NOWRITE(m);
n->m_len = m->m_len;
bcopy(M_START(m), n->m_dat,
m->m_len + M_LEADINGSPACE_NOWRITE(m));
}
else {
/*
* This is the case where we need to "settle for what
* we can get". The most probable way to this code
* path is that we've already taken references to the
* maximum number of mbuf clusters we can, and the data
* is too long to fit in an mbuf's internal storage.
* Try for a "best fit".
*/
tcp_pcap_copy_bestfit(th, m, n);
/* Don't try to get additional data. */
goto add_to_queue;
}
if (m->m_next) {
n->m_next = m_copym(m->m_next, 0, M_COPYALL, M_NOWAIT);
tcp_pcap_adj_cluster_reference(n->m_next, 1);
}
add_to_queue:
/* Add the new mbuf to the list. */
if (mbufq_enqueue(queue, n)) {
/* This shouldn't happen. If INVARIANTS is defined, panic. */
KASSERT(0, ("%s: mbufq was unexpectedly full!", __func__));
tcp_pcap_m_freem(n);
}
}
void
tcp_pcap_drain(struct mbufq *queue)
{
struct mbuf *m;
while ((m = mbufq_dequeue(queue)))
tcp_pcap_m_freem(m);
}
void
tcp_pcap_tcpcb_init(struct tcpcb *tp)
{
mbufq_init(&(tp->t_inpkts), V_tcp_pcap_packets);
mbufq_init(&(tp->t_outpkts), V_tcp_pcap_packets);
}
void
tcp_pcap_set_sock_max(struct mbufq *queue, int newval)
{
queue->mq_maxlen = newval;
while (queue->mq_len > queue->mq_maxlen)
tcp_pcap_m_freem(mbufq_dequeue(queue));
}
int
tcp_pcap_get_sock_max(struct mbufq *queue)
{
return queue->mq_maxlen;
}