freebsd-nq/sys/conf/files.amd64

731 lines
32 KiB
Plaintext
Raw Normal View History

# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
# $FreeBSD$
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
cloudabi32_vdso.o optional compat_cloudabi32 \
dependency "$S/contrib/cloudabi/cloudabi_vdso_i686_on_64bit.S" \
compile-with "${CC} -x assembler-with-cpp -m32 -shared -nostdinc -nostdlib -Wl,-T$S/compat/cloudabi/cloudabi_vdso.lds $S/contrib/cloudabi/cloudabi_vdso_i686_on_64bit.S -o ${.TARGET}" \
no-obj no-implicit-rule \
clean "cloudabi32_vdso.o"
#
cloudabi32_vdso_blob.o optional compat_cloudabi32 \
dependency "cloudabi32_vdso.o" \
compile-with "${OBJCOPY} --input-target binary --output-target elf64-x86-64-freebsd --binary-architecture i386 cloudabi32_vdso.o ${.TARGET}" \
no-implicit-rule \
clean "cloudabi32_vdso_blob.o"
#
cloudabi64_vdso.o optional compat_cloudabi64 \
dependency "$S/contrib/cloudabi/cloudabi_vdso_x86_64.S" \
compile-with "${CC} -x assembler-with-cpp -shared -nostdinc -nostdlib -Wl,-T$S/compat/cloudabi/cloudabi_vdso.lds $S/contrib/cloudabi/cloudabi_vdso_x86_64.S -o ${.TARGET}" \
no-obj no-implicit-rule \
clean "cloudabi64_vdso.o"
#
cloudabi64_vdso_blob.o optional compat_cloudabi64 \
dependency "cloudabi64_vdso.o" \
compile-with "${OBJCOPY} --input-target binary --output-target elf64-x86-64-freebsd --binary-architecture i386 cloudabi64_vdso.o ${.TARGET}" \
no-implicit-rule \
clean "cloudabi64_vdso_blob.o"
#
linux32_genassym.o optional compat_linux32 \
dependency "$S/amd64/linux32/linux32_genassym.c" \
compile-with "${CC} ${CFLAGS:N-flto:N-fno-common} -c ${.IMPSRC}" \
no-obj no-implicit-rule \
clean "linux32_genassym.o"
#
linux32_assym.h optional compat_linux32 \
dependency "$S/kern/genassym.sh linux32_genassym.o" \
compile-with "sh $S/kern/genassym.sh linux32_genassym.o > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "linux32_assym.h"
#
linux32_locore.o optional compat_linux32 \
dependency "linux32_assym.h $S/amd64/linux32/linux32_locore.s" \
compile-with "${CC} -x assembler-with-cpp -DLOCORE -m32 -shared -s -pipe -I. -I$S -Werror -Wall -fPIC -fno-common -nostdinc -nostdlib -Wl,-T$S/amd64/linux32/linux32_vdso.lds.s -Wl,-soname=linux32_vdso.so,--eh-frame-hdr,-warn-common ${.IMPSRC} -o ${.TARGET}" \
no-obj no-implicit-rule \
clean "linux32_locore.o"
#
linux32_vdso.so optional compat_linux32 \
dependency "linux32_locore.o" \
compile-with "${OBJCOPY} --input-target binary --output-target elf64-x86-64-freebsd --binary-architecture i386 linux32_locore.o ${.TARGET}" \
no-implicit-rule \
clean "linux32_vdso.so"
#
ia32_genassym.o standard \
dependency "$S/compat/ia32/ia32_genassym.c" \
compile-with "${CC} ${CFLAGS:N-flto:N-fno-common} -c ${.IMPSRC}" \
no-obj no-implicit-rule \
clean "ia32_genassym.o"
#
ia32_assym.h standard \
dependency "$S/kern/genassym.sh ia32_genassym.o" \
compile-with "env NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genassym.sh ia32_genassym.o > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "ia32_assym.h"
#
font.h optional sc_dflt_font \
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
#
atkbdmap.h optional atkbd_dflt_keymap \
compile-with "kbdcontrol -P ${S:S/sys$/share/}/vt/keymaps -P ${S:S/sys$/share/}/syscons/keymaps -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "atkbdmap.h"
#
ukbdmap.h optional ukbd_dflt_keymap \
compile-with "kbdcontrol -P ${S:S/sys$/share/}/vt/keymaps -P ${S:S/sys$/share/}/syscons/keymaps -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "ukbdmap.h"
#
hpt27xx_lib.o optional hpt27xx \
dependency "$S/dev/hpt27xx/amd64-elf.hpt27xx_lib.o.uu" \
compile-with "uudecode < $S/dev/hpt27xx/amd64-elf.hpt27xx_lib.o.uu" \
no-implicit-rule
#
hptmvraid.o optional hptmv \
dependency "$S/dev/hptmv/amd64-elf.raid.o.uu" \
compile-with "uudecode < $S/dev/hptmv/amd64-elf.raid.o.uu" \
no-implicit-rule
#
hptnr_lib.o optional hptnr \
dependency "$S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \
compile-with "uudecode < $S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \
no-implicit-rule
#
hptrr_lib.o optional hptrr \
dependency "$S/dev/hptrr/amd64-elf.hptrr_lib.o.uu" \
compile-with "uudecode < $S/dev/hptrr/amd64-elf.hptrr_lib.o.uu" \
no-implicit-rule
#
amd64/acpica/acpi_machdep.c optional acpi
acpi_wakecode.o optional acpi \
dependency "$S/amd64/acpica/acpi_wakecode.S assym.s" \
compile-with "${NORMAL_S}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.o"
acpi_wakecode.bin optional acpi \
dependency "acpi_wakecode.o" \
compile-with "${OBJCOPY} -S -O binary acpi_wakecode.o ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.bin"
acpi_wakecode.h optional acpi \
dependency "acpi_wakecode.bin" \
compile-with "file2c -sx 'static char wakecode[] = {' '};' < acpi_wakecode.bin > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.h"
acpi_wakedata.h optional acpi \
dependency "acpi_wakecode.o" \
compile-with '${NM} -n --defined-only acpi_wakecode.o | while read offset dummy what; do echo "#define $${what} 0x$${offset}"; done > ${.TARGET}' \
no-obj no-implicit-rule before-depend \
clean "acpi_wakedata.h"
#
#amd64/amd64/apic_vector.S standard
amd64/amd64/atomic.c standard
amd64/amd64/bios.c standard
amd64/amd64/bpf_jit_machdep.c optional bpf_jitter
2003-05-03 03:30:29 +00:00
amd64/amd64/cpu_switch.S standard
amd64/amd64/db_disasm.c optional ddb
amd64/amd64/db_interface.c optional ddb
amd64/amd64/db_trace.c optional ddb
amd64/amd64/efirt_machdep.c optional efirt
amd64/amd64/elf_machdep.c standard
2003-05-03 00:19:42 +00:00
amd64/amd64/exception.S standard
amd64/amd64/fpu.c standard
2004-07-10 23:31:17 +00:00
amd64/amd64/gdb_machdep.c optional gdb
amd64/amd64/in_cksum.c optional inet | inet6
amd64/amd64/initcpu.c standard
amd64/amd64/io.c optional io
2003-05-03 00:19:42 +00:00
amd64/amd64/locore.S standard no-obj
amd64/amd64/xen-locore.S optional xenhvm
amd64/amd64/machdep.c standard
amd64/amd64/mem.c optional mem
Introduce minidumps. Full physical memory crash dumps are still available via the debug.minidump sysctl and tunable. Traditional dumps store all physical memory. This was once a good thing when machines had a maximum of 64M of ram and 1GB of kvm. These days, machines often have many gigabytes of ram and a smaller amount of kvm. libkvm+kgdb don't have a way to access physical ram that is not mapped into kvm at the time of the crash dump, so the extra ram being dumped is mostly wasted. Minidumps invert the process. Instead of dumping physical memory in in order to guarantee that all of kvm's backing is dumped, minidumps instead dump only memory that is actively mapped into kvm. amd64 has a direct map region that things like UMA use. Obviously we cannot dump all of the direct map region because that is effectively an old style all-physical-memory dump. Instead, introduce a bitmap and two helper routines (dump_add_page(pa) and dump_drop_page(pa)) that allow certain critical direct map pages to be included in the dump. uma_machdep.c's allocator is the intended consumer. Dumps are a custom format. At the very beginning of the file is a header, then a copy of the message buffer, then the bitmap of pages present in the dump, then the final level of the kvm page table trees (2MB mappings are expanded into a 4K page mappings), then the sparse physical pages according to the bitmap. libkvm can now conveniently access the kvm page table entries. Booting my test 8GB machine, forcing it into ddb and forcing a dump leads to a 48MB minidump. While this is a best case, I expect minidumps to be in the 100MB-500MB range. Obviously, never larger than physical memory of course. minidumps are on by default. It would want be necessary to turn them off if it was necessary to debug corrupt kernel page table management as that would mess up minidumps as well. Both minidumps and regular dumps are supported on the same machine.
2006-04-21 04:24:50 +00:00
amd64/amd64/minidump_machdep.c standard
amd64/amd64/mp_machdep.c optional smp
amd64/amd64/mpboot.S optional smp
amd64/amd64/pmap.c standard
amd64/amd64/prof_machdep.c optional profiling-routine
Add support for the extended FPU states on amd64, both for native 64bit and 32bit ABIs. As a side-effect, it enables AVX on capable CPUs. In particular: - Query the CPU support for XSAVE, list of the supported extensions and the required size of FPU save area. The hw.use_xsave tunable is provided for disabling XSAVE, and hw.xsave_mask may be used to select the enabled extensions. - Remove the FPU save area from PCB and dynamically allocate the (run-time sized) user save area on the top of the kernel stack, right above the PCB. Reorganize the thread0 PCB initialization to postpone it after BSP is queried for save area size. - The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as well. FPU state is only useful for suspend, where it is saved in dynamically allocated suspfpusave area. - Use XSAVE and XRSTOR to save/restore FPU state, if supported and enabled. - Define new mcontext_t flag _MC_HASFPXSTATE, indicating that mcontext_t has a valid pointer to out-of-struct extended FPU state. Signal handlers are supplied with stack-allocated fpu state. The sigreturn(2) and setcontext(2) syscall honour the flag, allowing the signal handlers to inspect and manipilate extended state in the interrupted context. - The getcontext(2) never returns extended state, since there is no place in the fixed-sized mcontext_t to place variable-sized save area. And, since mcontext_t is embedded into ucontext_t, makes it impossible to fix in a reasonable way. Instead of extending getcontext(2) syscall, provide a sysarch(2) facility to query extended FPU state. - Add ptrace(2) support for getting and setting extended state; while there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries. - Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to consumers, making it opaque. Internally, struct fpu_kern_ctx now contains a space for the extended state. Convert in-kernel consumers of fpu_kern KPI both on i386 and amd64. First version of the support for AVX was submitted by Tim Bird <tim.bird am sony com> on behalf of Sony. This version was written from scratch. Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org> MFC after: 1 month
2012-01-21 17:45:27 +00:00
amd64/amd64/ptrace_machdep.c standard
2003-05-03 00:19:42 +00:00
amd64/amd64/sigtramp.S standard
amd64/amd64/support.S standard
amd64/amd64/sys_machdep.c standard
amd64/amd64/trap.c standard
amd64/amd64/uio_machdep.c standard
amd64/amd64/uma_machdep.c standard
amd64/amd64/vm_machdep.c standard
amd64/cloudabi32/cloudabi32_sysvec.c optional compat_cloudabi32
amd64/cloudabi64/cloudabi64_sysvec.c optional compat_cloudabi64
amd64/pci/pci_cfgreg.c optional pci
cddl/contrib/opensolaris/common/atomic/amd64/opensolaris_atomic.S optional zfs | dtrace compile-with "${ZFS_S}"
cddl/dev/dtrace/amd64/dtrace_asm.S optional dtrace compile-with "${DTRACE_S}"
cddl/dev/dtrace/amd64/dtrace_subr.c optional dtrace compile-with "${DTRACE_C}"
cddl/dev/fbt/x86/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}"
cddl/dev/dtrace/x86/dis_tables.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}"
cddl/dev/dtrace/x86/instr_size.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}"
crypto/aesni/aeskeys_amd64.S optional aesni
crypto/aesni/aesni.c optional aesni
2014-12-12 19:56:36 +00:00
aesni_ghash.o optional aesni \
dependency "$S/crypto/aesni/aesni_ghash.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} ${PROF} -mmmx -msse -msse4 -maes -mpclmul ${.IMPSRC}" \
2014-12-12 19:56:36 +00:00
no-implicit-rule \
clean "aesni_ghash.o"
aesni_wrap.o optional aesni \
dependency "$S/crypto/aesni/aesni_wrap.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} ${PROF} -mmmx -msse -msse4 -maes ${.IMPSRC}" \
no-implicit-rule \
clean "aesni_wrap.o"
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
crypto/blowfish/bf_enc.c optional crypto | ipsec | ipsec_support
crypto/des/des_enc.c optional crypto | ipsec | \
ipsec_support | netsmb
intel_sha1.o optional aesni \
dependency "$S/crypto/aesni/intel_sha1.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${PROF} -mmmx -msse -msse4 -msha ${.IMPSRC}" \
no-implicit-rule \
clean "intel_sha1.o"
intel_sha256.o optional aesni \
dependency "$S/crypto/aesni/intel_sha256.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${PROF} -mmmx -msse -msse4 -msha ${.IMPSRC}" \
no-implicit-rule \
clean "intel_sha256.o"
crypto/via/padlock.c optional padlock
crypto/via/padlock_cipher.c optional padlock
crypto/via/padlock_hash.c optional padlock
2004-12-21 02:07:38 +00:00
dev/acpica/acpi_if.m standard
dev/acpica/acpi_hpet.c optional acpi
dev/acpica/acpi_pci.c optional acpi pci
dev/acpica/acpi_pci_link.c optional acpi pci
dev/acpica/acpi_pcib.c optional acpi pci
dev/acpica/acpi_pcib_acpi.c optional acpi pci
dev/acpica/acpi_pcib_pci.c optional acpi pci
dev/acpica/acpi_timer.c optional acpi
dev/acpi_support/acpi_wmi_if.m standard
dev/agp/agp_amd64.c optional agp
dev/agp/agp_i810.c optional agp
dev/agp/agp_via.c optional agp
dev/amdsbwd/amdsbwd.c optional amdsbwd
dev/amdsmn/amdsmn.c optional amdsmn | amdtemp
dev/amdtemp/amdtemp.c optional amdtemp
dev/arcmsr/arcmsr.c optional arcmsr pci
dev/asmc/asmc.c optional asmc isa
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
dev/atkbdc/atkbd.c optional atkbd atkbdc
dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc
dev/atkbdc/atkbdc.c optional atkbdc
dev/atkbdc/atkbdc_isa.c optional atkbdc isa
dev/atkbdc/atkbdc_subr.c optional atkbdc
dev/atkbdc/psm.c optional psm atkbdc
dev/bxe/bxe.c optional bxe pci
dev/bxe/bxe_stats.c optional bxe pci
dev/bxe/bxe_debug.c optional bxe pci
dev/bxe/ecore_sp.c optional bxe pci
dev/bxe/bxe_elink.c optional bxe pci
dev/bxe/57710_init_values.c optional bxe pci
dev/bxe/57711_init_values.c optional bxe pci
dev/bxe/57712_init_values.c optional bxe pci
dev/coretemp/coretemp.c optional coretemp
dev/cpuctl/cpuctl.c optional cpuctl
dev/dpms/dpms.c optional dpms
# There are no systems with isa slots, so all ed isa entries should go..
dev/ed/if_ed_3c503.c optional ed isa ed_3c503
dev/ed/if_ed_isa.c optional ed isa
dev/ed/if_ed_wd80x3.c optional ed isa
dev/ed/if_ed_hpp.c optional ed isa ed_hpp
dev/ed/if_ed_sic.c optional ed isa ed_sic
dev/fb/fb.c optional fb | vga
dev/fb/s3_pci.c optional s3pci
dev/fb/vesa.c optional vga vesa
dev/fb/vga.c optional vga
dev/ichwd/ichwd.c optional ichwd
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
dev/if_ndis/if_ndis.c optional ndis
dev/if_ndis/if_ndis_pccard.c optional ndis pccard
dev/if_ndis/if_ndis_pci.c optional ndis cardbus | ndis pci
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
dev/if_ndis/if_ndis_usb.c optional ndis usb
dev/imcsmb/imcsmb.c optional imcsmb
dev/imcsmb/imcsmb_pci.c optional imcsmb pci
dev/intel/spi.c optional intelspi
dev/io/iodev.c optional io
dev/ioat/ioat.c optional ioat pci
dev/ioat/ioat_test.c optional ioat pci
dev/ipmi/ipmi.c optional ipmi
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
dev/ipmi/ipmi_acpi.c optional ipmi acpi
dev/ipmi/ipmi_isa.c optional ipmi isa
dev/ipmi/ipmi_kcs.c optional ipmi
dev/ipmi/ipmi_smic.c optional ipmi
dev/ipmi/ipmi_smbus.c optional ipmi smbus
dev/ipmi/ipmi_smbios.c optional ipmi
dev/ipmi/ipmi_ssif.c optional ipmi smbus
dev/ipmi/ipmi_pci.c optional ipmi pci
dev/ipmi/ipmi_linux.c optional ipmi compat_linux32
dev/ixl/if_ixl.c optional ixl pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_main.c optional ixl pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_qmgr.c optional ixl pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_iov.c optional ixl pci pci_iov \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_i2c.c optional ixl pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_iw.c optional ixl pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/if_ixlv.c optional ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixlvc.c optional ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_txrx.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_osdep.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_lan_hmc.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_hmc.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_common.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_nvm.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_adminq.c optional ixl pci | ixlv pci \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/fdc/fdc.c optional fdc
2004-07-15 16:43:52 +00:00
dev/fdc/fdc_acpi.c optional fdc
dev/fdc/fdc_isa.c optional fdc isa
dev/fdc/fdc_pccard.c optional fdc pccard
dev/gpio/bytgpio.c optional bytgpio
dev/gpio/chvgpio.c optional chvgpio
dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_config.c optional hpt27xx
dev/hptmv/entry.c optional hptmv
dev/hptmv/mv.c optional hptmv
dev/hptmv/gui_lib.c optional hptmv
dev/hptmv/hptproc.c optional hptmv
dev/hptmv/ioctl.c optional hptmv
dev/hptnr/hptnr_os_bsd.c optional hptnr
dev/hptnr/hptnr_osm_bsd.c optional hptnr
dev/hptnr/hptnr_config.c optional hptnr
dev/hptrr/hptrr_os_bsd.c optional hptrr
dev/hptrr/hptrr_osm_bsd.c optional hptrr
dev/hptrr/hptrr_config.c optional hptrr
dev/hwpmc/hwpmc_amd.c optional hwpmc
dev/hwpmc/hwpmc_intel.c optional hwpmc
dev/hwpmc/hwpmc_core.c optional hwpmc
dev/hwpmc/hwpmc_uncore.c optional hwpmc
dev/hwpmc/hwpmc_piv.c optional hwpmc
dev/hwpmc/hwpmc_tsc.c optional hwpmc
dev/hwpmc/hwpmc_x86.c optional hwpmc
dev/hyperv/input/hv_kbd.c optional hyperv
dev/hyperv/input/hv_kbdc.c optional hyperv
dev/hyperv/pcib/vmbus_pcib.c optional hyperv pci
dev/hyperv/netvsc/hn_nvs.c optional hyperv
dev/hyperv/netvsc/hn_rndis.c optional hyperv
dev/hyperv/netvsc/if_hn.c optional hyperv
dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c optional hyperv
dev/hyperv/utilities/hv_kvp.c optional hyperv
2016-11-15 02:36:12 +00:00
dev/hyperv/utilities/hv_snapshot.c optional hyperv
dev/hyperv/utilities/vmbus_heartbeat.c optional hyperv
dev/hyperv/utilities/vmbus_ic.c optional hyperv
dev/hyperv/utilities/vmbus_shutdown.c optional hyperv
dev/hyperv/utilities/vmbus_timesync.c optional hyperv
dev/hyperv/vmbus/hyperv.c optional hyperv
dev/hyperv/vmbus/hyperv_busdma.c optional hyperv
dev/hyperv/vmbus/vmbus.c optional hyperv pci
dev/hyperv/vmbus/vmbus_br.c optional hyperv
dev/hyperv/vmbus/vmbus_chan.c optional hyperv
dev/hyperv/vmbus/vmbus_et.c optional hyperv
dev/hyperv/vmbus/vmbus_if.m optional hyperv
dev/hyperv/vmbus/vmbus_res.c optional hyperv
dev/hyperv/vmbus/vmbus_xact.c optional hyperv
dev/hyperv/vmbus/amd64/hyperv_machdep.c optional hyperv
dev/hyperv/vmbus/amd64/vmbus_vector.S optional hyperv
dev/nctgpio/nctgpio.c optional nctgpio
dev/nfe/if_nfe.c optional nfe pci
dev/ntb/if_ntb/if_ntb.c optional if_ntb
dev/ntb/ntb_transport.c optional ntb_transport | if_ntb
dev/ntb/ntb.c optional ntb | ntb_transport | if_ntb | ntb_hw_intel | ntb_hw_plx | ntb_hw
dev/ntb/ntb_if.m optional ntb | ntb_transport | if_ntb | ntb_hw_intel | ntb_hw_plx | ntb_hw
dev/ntb/ntb_hw/ntb_hw_intel.c optional ntb_hw_intel | ntb_hw
dev/ntb/ntb_hw/ntb_hw_plx.c optional ntb_hw_plx | ntb_hw
dev/nvd/nvd.c optional nvd nvme
dev/nvme/nvme.c optional nvme
dev/nvme/nvme_ctrlr.c optional nvme
dev/nvme/nvme_ctrlr_cmd.c optional nvme
dev/nvme/nvme_ns.c optional nvme
dev/nvme/nvme_ns_cmd.c optional nvme
dev/nvme/nvme_qpair.c optional nvme
dev/nvme/nvme_sim.c optional nvme scbus
dev/nvme/nvme_sysctl.c optional nvme
dev/nvme/nvme_test.c optional nvme
dev/nvme/nvme_util.c optional nvme
dev/nvram/nvram.c optional nvram isa
dev/random/ivy.c optional rdrand_rng
dev/random/nehemiah.c optional padlock_rng
dev/qlxge/qls_dbg.c optional qlxge pci
dev/qlxge/qls_dump.c optional qlxge pci
dev/qlxge/qls_hw.c optional qlxge pci
dev/qlxge/qls_ioctl.c optional qlxge pci
dev/qlxge/qls_isr.c optional qlxge pci
dev/qlxge/qls_os.c optional qlxge pci
dev/qlxgb/qla_dbg.c optional qlxgb pci
dev/qlxgb/qla_hw.c optional qlxgb pci
dev/qlxgb/qla_ioctl.c optional qlxgb pci
dev/qlxgb/qla_isr.c optional qlxgb pci
dev/qlxgb/qla_misc.c optional qlxgb pci
dev/qlxgb/qla_os.c optional qlxgb pci
dev/qlxgbe/ql_dbg.c optional qlxgbe pci
dev/qlxgbe/ql_hw.c optional qlxgbe pci
dev/qlxgbe/ql_ioctl.c optional qlxgbe pci
dev/qlxgbe/ql_isr.c optional qlxgbe pci
dev/qlxgbe/ql_misc.c optional qlxgbe pci
dev/qlxgbe/ql_os.c optional qlxgbe pci
dev/qlxgbe/ql_reset.c optional qlxgbe pci
dev/qlnx/qlnxe/ecore_cxt.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_dbg_fw_funcs.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_dcbx.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_dev.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_hw.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_init_fw_funcs.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_init_ops.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_int.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_l2.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_mcp.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_sp_commands.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/ecore_spq.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/qlnx_ioctl.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/qlnx/qlnxe/qlnx_os.c optional qlnxe pci \
compile-with "${LINUXKPI_C}"
dev/sfxge/common/ef10_ev.c optional sfxge pci
dev/sfxge/common/ef10_filter.c optional sfxge pci
dev/sfxge/common/ef10_intr.c optional sfxge pci
dev/sfxge/common/ef10_mac.c optional sfxge pci
dev/sfxge/common/ef10_mcdi.c optional sfxge pci
dev/sfxge/common/ef10_nic.c optional sfxge pci
dev/sfxge/common/ef10_nvram.c optional sfxge pci
dev/sfxge/common/ef10_phy.c optional sfxge pci
dev/sfxge/common/ef10_rx.c optional sfxge pci
dev/sfxge/common/ef10_tx.c optional sfxge pci
dev/sfxge/common/ef10_vpd.c optional sfxge pci
dev/sfxge/common/efx_bootcfg.c optional sfxge pci
dev/sfxge/common/efx_crc32.c optional sfxge pci
dev/sfxge/common/efx_ev.c optional sfxge pci
dev/sfxge/common/efx_filter.c optional sfxge pci
dev/sfxge/common/efx_hash.c optional sfxge pci
dev/sfxge/common/efx_intr.c optional sfxge pci
dev/sfxge/common/efx_lic.c optional sfxge pci
dev/sfxge/common/efx_mac.c optional sfxge pci
dev/sfxge/common/efx_mcdi.c optional sfxge pci
dev/sfxge/common/efx_mon.c optional sfxge pci
dev/sfxge/common/efx_nic.c optional sfxge pci
dev/sfxge/common/efx_nvram.c optional sfxge pci
dev/sfxge/common/efx_phy.c optional sfxge pci
dev/sfxge/common/efx_port.c optional sfxge pci
dev/sfxge/common/efx_rx.c optional sfxge pci
dev/sfxge/common/efx_sram.c optional sfxge pci
dev/sfxge/common/efx_tx.c optional sfxge pci
dev/sfxge/common/efx_vpd.c optional sfxge pci
dev/sfxge/common/hunt_nic.c optional sfxge pci
dev/sfxge/common/mcdi_mon.c optional sfxge pci
dev/sfxge/common/medford_nic.c optional sfxge pci
dev/sfxge/common/siena_mac.c optional sfxge pci
dev/sfxge/common/siena_mcdi.c optional sfxge pci
dev/sfxge/common/siena_nic.c optional sfxge pci
dev/sfxge/common/siena_nvram.c optional sfxge pci
dev/sfxge/common/siena_phy.c optional sfxge pci
dev/sfxge/common/siena_sram.c optional sfxge pci
dev/sfxge/common/siena_vpd.c optional sfxge pci
dev/sfxge/sfxge.c optional sfxge pci
dev/sfxge/sfxge_dma.c optional sfxge pci
dev/sfxge/sfxge_ev.c optional sfxge pci
dev/sfxge/sfxge_intr.c optional sfxge pci
dev/sfxge/sfxge_mcdi.c optional sfxge pci
dev/sfxge/sfxge_nvram.c optional sfxge pci
dev/sfxge/sfxge_port.c optional sfxge pci
dev/sfxge/sfxge_rx.c optional sfxge pci
dev/sfxge/sfxge_tx.c optional sfxge pci
dev/sio/sio.c optional sio
dev/sio/sio_isa.c optional sio isa
dev/sio/sio_pccard.c optional sio pccard
dev/sio/sio_pci.c optional sio pci
dev/sio/sio_puc.c optional sio puc
dev/speaker/spkr.c optional speaker
dev/syscons/apm/apm_saver.c optional apm_saver apm
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
dev/syscons/scterm-teken.c optional sc
dev/syscons/scvesactl.c optional sc vga vesa
dev/syscons/scvgarndr.c optional sc vga
dev/syscons/scvtb.c optional sc
dev/tpm/tpm.c optional tpm
dev/tpm/tpm_acpi.c optional tpm acpi
dev/tpm/tpm_isa.c optional tpm isa
dev/uart/uart_cpu_x86.c optional uart
dev/viawd/viawd.c optional viawd
dev/vmware/vmxnet3/if_vmx.c optional vmx
dev/wbwd/wbwd.c optional wbwd
dev/xen/pci/xen_acpi_pci.c optional xenhvm
dev/xen/pci/xen_pci.c optional xenhvm
dev/isci/isci.c optional isci
dev/isci/isci_controller.c optional isci
dev/isci/isci_domain.c optional isci
dev/isci/isci_interrupt.c optional isci
dev/isci/isci_io_request.c optional isci
dev/isci/isci_logger.c optional isci
dev/isci/isci_oem_parameters.c optional isci
dev/isci/isci_remote_device.c optional isci
dev/isci/isci_sysctl.c optional isci
dev/isci/isci_task_request.c optional isci
dev/isci/isci_timer.c optional isci
dev/isci/scil/sati.c optional isci
dev/isci/scil/sati_abort_task_set.c optional isci
dev/isci/scil/sati_atapi.c optional isci
dev/isci/scil/sati_device.c optional isci
dev/isci/scil/sati_inquiry.c optional isci
dev/isci/scil/sati_log_sense.c optional isci
dev/isci/scil/sati_lun_reset.c optional isci
dev/isci/scil/sati_mode_pages.c optional isci
dev/isci/scil/sati_mode_select.c optional isci
dev/isci/scil/sati_mode_sense.c optional isci
dev/isci/scil/sati_mode_sense_10.c optional isci
dev/isci/scil/sati_mode_sense_6.c optional isci
dev/isci/scil/sati_move.c optional isci
dev/isci/scil/sati_passthrough.c optional isci
dev/isci/scil/sati_read.c optional isci
dev/isci/scil/sati_read_buffer.c optional isci
dev/isci/scil/sati_read_capacity.c optional isci
dev/isci/scil/sati_reassign_blocks.c optional isci
dev/isci/scil/sati_report_luns.c optional isci
dev/isci/scil/sati_request_sense.c optional isci
dev/isci/scil/sati_start_stop_unit.c optional isci
dev/isci/scil/sati_synchronize_cache.c optional isci
dev/isci/scil/sati_test_unit_ready.c optional isci
dev/isci/scil/sati_unmap.c optional isci
dev/isci/scil/sati_util.c optional isci
dev/isci/scil/sati_verify.c optional isci
dev/isci/scil/sati_write.c optional isci
dev/isci/scil/sati_write_and_verify.c optional isci
dev/isci/scil/sati_write_buffer.c optional isci
dev/isci/scil/sati_write_long.c optional isci
dev/isci/scil/sci_abstract_list.c optional isci
dev/isci/scil/sci_base_controller.c optional isci
dev/isci/scil/sci_base_domain.c optional isci
dev/isci/scil/sci_base_iterator.c optional isci
dev/isci/scil/sci_base_library.c optional isci
dev/isci/scil/sci_base_logger.c optional isci
dev/isci/scil/sci_base_memory_descriptor_list.c optional isci
dev/isci/scil/sci_base_memory_descriptor_list_decorator.c optional isci
dev/isci/scil/sci_base_object.c optional isci
dev/isci/scil/sci_base_observer.c optional isci
dev/isci/scil/sci_base_phy.c optional isci
dev/isci/scil/sci_base_port.c optional isci
dev/isci/scil/sci_base_remote_device.c optional isci
dev/isci/scil/sci_base_request.c optional isci
dev/isci/scil/sci_base_state_machine.c optional isci
dev/isci/scil/sci_base_state_machine_logger.c optional isci
dev/isci/scil/sci_base_state_machine_observer.c optional isci
dev/isci/scil/sci_base_subject.c optional isci
dev/isci/scil/sci_util.c optional isci
dev/isci/scil/scic_sds_controller.c optional isci
dev/isci/scil/scic_sds_library.c optional isci
dev/isci/scil/scic_sds_pci.c optional isci
dev/isci/scil/scic_sds_phy.c optional isci
dev/isci/scil/scic_sds_port.c optional isci
dev/isci/scil/scic_sds_port_configuration_agent.c optional isci
dev/isci/scil/scic_sds_remote_device.c optional isci
dev/isci/scil/scic_sds_remote_node_context.c optional isci
dev/isci/scil/scic_sds_remote_node_table.c optional isci
dev/isci/scil/scic_sds_request.c optional isci
dev/isci/scil/scic_sds_sgpio.c optional isci
dev/isci/scil/scic_sds_smp_remote_device.c optional isci
dev/isci/scil/scic_sds_smp_request.c optional isci
dev/isci/scil/scic_sds_ssp_request.c optional isci
dev/isci/scil/scic_sds_stp_packet_request.c optional isci
dev/isci/scil/scic_sds_stp_remote_device.c optional isci
dev/isci/scil/scic_sds_stp_request.c optional isci
dev/isci/scil/scic_sds_unsolicited_frame_control.c optional isci
dev/isci/scil/scif_sas_controller.c optional isci
dev/isci/scil/scif_sas_controller_state_handlers.c optional isci
dev/isci/scil/scif_sas_controller_states.c optional isci
dev/isci/scil/scif_sas_domain.c optional isci
dev/isci/scil/scif_sas_domain_state_handlers.c optional isci
dev/isci/scil/scif_sas_domain_states.c optional isci
dev/isci/scil/scif_sas_high_priority_request_queue.c optional isci
dev/isci/scil/scif_sas_internal_io_request.c optional isci
dev/isci/scil/scif_sas_io_request.c optional isci
dev/isci/scil/scif_sas_io_request_state_handlers.c optional isci
dev/isci/scil/scif_sas_io_request_states.c optional isci
dev/isci/scil/scif_sas_library.c optional isci
dev/isci/scil/scif_sas_remote_device.c optional isci
dev/isci/scil/scif_sas_remote_device_ready_substate_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_ready_substates.c optional isci
dev/isci/scil/scif_sas_remote_device_starting_substate_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_starting_substates.c optional isci
dev/isci/scil/scif_sas_remote_device_state_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_states.c optional isci
dev/isci/scil/scif_sas_request.c optional isci
dev/isci/scil/scif_sas_smp_activity_clear_affiliation.c optional isci
dev/isci/scil/scif_sas_smp_io_request.c optional isci
dev/isci/scil/scif_sas_smp_phy.c optional isci
dev/isci/scil/scif_sas_smp_remote_device.c optional isci
dev/isci/scil/scif_sas_stp_io_request.c optional isci
dev/isci/scil/scif_sas_stp_remote_device.c optional isci
dev/isci/scil/scif_sas_stp_task_request.c optional isci
dev/isci/scil/scif_sas_task_request.c optional isci
dev/isci/scil/scif_sas_task_request_state_handlers.c optional isci
dev/isci/scil/scif_sas_task_request_states.c optional isci
dev/isci/scil/scif_sas_timer.c optional isci
isa/syscons_isa.c optional sc
isa/vga_isa.c optional vga
kern/kern_clocksource.c standard
kern/link_elf_obj.c standard
Use inline asm instead of unportable intrinsics for the SSE4 crc32 optimization. This fixes building with gcc-4.2.1 (it doesn't support SSE4). gas-2.17.50 [FreeBSD] supports SSE4 instructions, so this doesn't need using .byte directives. This fixes depending on host user headers in the kernel. Fix user includes (don't depend on namespace pollution in <nmmintrin.h> that is not included now). The instrinsics had no advantages except to sometimes avoid compiler pessimixations. clang understands them a bit better than inline asm, and generates better looking code which also runs better for cem, but for me it just at the same speed or slower by doing excessive unrollowing in all the wrong places. gcc-4.2.1 also doesn't understand what it is doing with unrolling, but with -O3 somehow it does more unrolling that helps. Reduce 1 of the the compiler pessimizations (copying a variable which already satisfies an "rm" constraint in a good way by being in memory and not used again, to different memory and accessing it there. Force copying it to a register instead). Try to optimize the inner loops significantly, so as to run at full speed on smaller inputs. The algorithm is already very MD, and was tuned for the throughput of 3 crc32 instructions per cycle found on at least Sandybridge through Haswell. Now it is even more tuned for this, so depends more on the compiler not rearranging or unrolling things too much. The main inner loop for should have no difficulty runing at full speed on these CPUs unless the compiler unrolls it too much. However, the main inner loop wasn't even used for buffers smaller than 24K. Now it is used for buffers larger than 384 bytes. Now it is not so long, and the main outer loop is used more. The new optimization is to try to arrange that the outer loop runs in parallel with the next inner loop except for the final iteration; then reduce the loop sizes significantly to take advantage of this. Approved by: cem Not tested in production by: bde
2017-03-26 10:31:48 +00:00
libkern/x86/crc32_sse42.c standard
libkern/memmove.c standard
libkern/memset.c standard
#
# IA32 binary support
#
#amd64/ia32/ia32_exception.S optional compat_freebsd32
amd64/ia32/ia32_reg.c optional compat_freebsd32
amd64/ia32/ia32_signal.c optional compat_freebsd32
amd64/ia32/ia32_sigtramp.S optional compat_freebsd32
amd64/ia32/ia32_syscall.c optional compat_freebsd32
amd64/ia32/ia32_misc.c optional compat_freebsd32
compat/ia32/ia32_sysvec.c optional compat_freebsd32
compat/linprocfs/linprocfs.c optional linprocfs
compat/linsysfs/linsysfs.c optional linsysfs
#
# Linux/i386 binary support
#
amd64/linux32/linux32_dummy.c optional compat_linux32
amd64/linux32/linux32_machdep.c optional compat_linux32
amd64/linux32/linux32_support.s optional compat_linux32 \
dependency "linux32_assym.h"
amd64/linux32/linux32_sysent.c optional compat_linux32
amd64/linux32/linux32_sysvec.c optional compat_linux32
compat/linux/linux_emul.c optional compat_linux32
compat/linux/linux_errno.c optional compat_linux32
compat/linux/linux_file.c optional compat_linux32
compat/linux/linux_fork.c optional compat_linux32
compat/linux/linux_futex.c optional compat_linux32
compat/linux/linux_getcwd.c optional compat_linux32
compat/linux/linux_ioctl.c optional compat_linux32
compat/linux/linux_ipc.c optional compat_linux32
compat/linux/linux_mib.c optional compat_linux32
compat/linux/linux_misc.c optional compat_linux32
compat/linux/linux_mmap.c optional compat_linux32
compat/linux/linux_signal.c optional compat_linux32
compat/linux/linux_socket.c optional compat_linux32
compat/linux/linux_stats.c optional compat_linux32
compat/linux/linux_sysctl.c optional compat_linux32
compat/linux/linux_time.c optional compat_linux32
compat/linux/linux_timer.c optional compat_linux32
compat/linux/linux_uid16.c optional compat_linux32
compat/linux/linux_util.c optional compat_linux32
compat/linux/linux_vdso.c optional compat_linux32
compat/linux/linux_common.c optional compat_linux32
compat/linux/linux_event.c optional compat_linux32
compat/linux/linux.c optional compat_linux32
dev/amr/amr_linux.c optional compat_linux32 amr
dev/mfi/mfi_linux.c optional compat_linux32 mfi
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
#
# Windows NDIS driver support
#
compat/ndis/kern_ndis.c optional ndisapi pci
compat/ndis/kern_windrv.c optional ndisapi pci
compat/ndis/subr_hal.c optional ndisapi pci
compat/ndis/subr_ndis.c optional ndisapi pci
compat/ndis/subr_ntoskrnl.c optional ndisapi pci
compat/ndis/subr_pe.c optional ndisapi pci
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
compat/ndis/subr_usbd.c optional ndisapi pci
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
compat/ndis/winx64_wrap.S optional ndisapi pci
#
# x86 real mode BIOS emulator, required by dpms/pci/vesa
#
compat/x86bios/x86bios.c optional x86bios | dpms | pci | vesa
contrib/x86emu/x86emu.c optional x86bios | dpms | pci | vesa
#
bhyve import part 2 of 2, guest kernel changes. This branch is now considered frozen: future bhyve development will take place in a branch off -CURRENT. sys/dev/bvm/bvm_console.c sys/dev/bvm/bvm_dbg.c - simple console driver/gdb debug port used for bringup. supported by user-space bhyve executable sys/conf/options.amd64 sys/amd64/amd64/minidump_machdep.c - allow NKPT to be set in the kernel config file sys/amd64/conf/GENERIC - mptable config options; bhyve user-space executable creates an mptable with number of CPUs, and optional vendor extension - add bvm console/debug - set NKPT to 512 to allow loading of large RAM disks from the loader - include kdb/gdb sys/amd64/amd64/local_apic.c sys/amd64/amd64/apic_vector.S sys/amd64/include/specialreg.h - if x2apic mode available, use MSRs to access the local APIC, otherwise fall back to 'classic' MMIO mode sys/amd64/amd64/mp_machdep.c - support AP spinup on CPU models that don't have real-mode support by overwriting the real-mode page with a message that supplies the bhyve user-space executable with enough information to start the AP directly in 64-bit mode. sys/amd64/amd64/vm_machdep.c - insert pause statements into cpu shutdown busy-wait loops sys/dev/blackhole/blackhole.c sys/modules/blackhole/Makefile - boot-time loadable module that claims all PCI bus/slot/funcs specified in an env var that are to be used for PCI passthrough sys/amd64/amd64/intr_machdep.c - allow round-robin assignment of device interrupts to CPUs to be disabled from the loader sys/amd64/include/bus.h - convert string ins/outs instructions to loops of individual in/out since bhyve doesn't support these yet sys/kern/subr_bus.c - if the device was no created with a fixed devclass, then remove it's association with the devclass it was associated with during probe. Otherwise, new drivers do not get a chance to probe/attach since the device will stay married to the first driver that it probed successfully but failed to attach. Sponsored by: NetApp, Inc.
2011-05-14 18:37:24 +00:00
# bvm console
#
dev/bvm/bvm_console.c optional bvmconsole
dev/bvm/bvm_dbg.c optional bvmdebug
#
# x86 shared code between IA32 and AMD64 architectures
#
x86/acpica/OsdEnvironment.c optional acpi
x86/acpica/acpi_apm.c optional acpi
x86/acpica/acpi_wakeup.c optional acpi
x86/acpica/madt.c optional acpi
x86/acpica/srat.c optional acpi
x86/bios/smbios.c optional smbios
x86/bios/vpd.c optional vpd
x86/cpufreq/powernow.c optional cpufreq
x86/cpufreq/est.c optional cpufreq
x86/cpufreq/hwpstate.c optional cpufreq
x86/cpufreq/p4tcc.c optional cpufreq
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
x86/iommu/busdma_dmar.c optional acpi acpi_dmar pci
x86/iommu/intel_ctx.c optional acpi acpi_dmar pci
x86/iommu/intel_drv.c optional acpi acpi_dmar pci
x86/iommu/intel_fault.c optional acpi acpi_dmar pci
x86/iommu/intel_gas.c optional acpi acpi_dmar pci
x86/iommu/intel_idpgtbl.c optional acpi acpi_dmar pci
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
x86/iommu/intel_intrmap.c optional acpi acpi_dmar pci
x86/iommu/intel_qi.c optional acpi acpi_dmar pci
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
x86/iommu/intel_quirks.c optional acpi acpi_dmar pci
x86/iommu/intel_utils.c optional acpi acpi_dmar pci
x86/isa/atpic.c optional atpic isa
x86/isa/atrtc.c standard
x86/isa/clock.c standard
x86/isa/elcr.c optional atpic isa | mptable
x86/isa/isa.c standard
x86/isa/isa_dma.c standard
x86/isa/nmi.c standard
x86/isa/orm.c optional isa
x86/pci/pci_bus.c optional pci
x86/pci/qpi.c optional pci
x86/x86/autoconf.c standard
Better support memory mapped console devices, such as VGA and EFI frame buffers and memory mapped UARTs. 1. Delay calling cninit() until after pmap_bootstrap(). This makes sure we have PMAP initialized enough to add translations. Keep kdb_init() after cninit() so that we have console when we need to break into the debugger on boot. 2. Unfortunately, the ATPIC code had be moved as well so as to avoid a spurious trap #30. The reason for which is not known at this time. 3. In pmap_mapdev_attr(), when we need to map a device prior to the VM system being initialized, use virtual_avail as the KVA to map the device at. In particular, avoid using the direct map on amd64 because we can't demote by virtue of not being able to allocate yet. Keep track of the translation. Re-use the translation after the VM has been initialized to not waste KVA and to satisfy the assumption in uart(4) that the handle returned for the low-level console is the same as later returned when the device is probed and attached. 4. In pmap_unmapdev() remove the mapping from the table when called pre-init. Otherwise keep the mapping. During bus probe and attach device resources are mapped and unmapped multiple times, which would have us destroy the mapping used by the low-level console. 5. In pmap_init(), set pmap_initialized to signal that we're not pre-init anymore. On amd64, bring the direct map in sync with the translations created at that time. 6. Implement bus_space_map() and bus_space_unmap() for real: when the tag corresponds to memory space, call the corresponding pmap_mapdev() and pmap_unmapdev() functions to construct and actual handle. 7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply call pmap_mapdev_attr() or bus_space_map() as desired. Notes: 1. uart(4) already used bus_space_map() during low-level console setup but since serial ports have traditionally been I/O port based, the lack of a proper implementation for said function was not a problem. It has always supported memory mapped UARTs for low-level consoles by setting hw.uart.console accordingly. 2. The use of the direct map on amd64 without setting caching attributes has been a bigger problem than previously thought. This change has the fortunate (and unexpected) side-effect of fixing various EFI frame buffer problems (though not all). PR: 191564, 194952 Special thanks to: 1. XipLink, Inc -- generously donated an Intel Bay Trail E3800 based eval board (ADLE3800PC). 2. The FreeBSD Foundation, in particular emaste@ -- for UEFI support in general and testing. 3. Everyone who tested the proposed for PR 191564. 4. jhb@ and kib@ for being a soundboard and applying a clue bat if so needed.
2015-08-12 15:26:32 +00:00
x86/x86/bus_machdep.c standard
x86/x86/busdma_bounce.c standard
x86/x86/busdma_machdep.c standard
x86/x86/cpu_machdep.c standard
x86/x86/dump_machdep.c standard
x86/x86/fdt_machdep.c optional fdt
x86/x86/identcpu.c standard
x86/x86/intr_machdep.c standard
x86/x86/io_apic.c standard
2012-03-30 19:10:14 +00:00
x86/x86/legacy.c standard
x86/x86/local_apic.c standard
x86/x86/mca.c standard
x86/x86/x86_mem.c optional mem
x86/x86/mptable.c optional mptable
x86/x86/mptable_pci.c optional mptable pci
x86/x86/mp_x86.c optional smp
x86/x86/mp_watchdog.c optional mp_watchdog smp
x86/x86/msi.c optional pci
x86/x86/nexus.c standard
x86/x86/pvclock.c standard
x86/x86/stack_machdep.c optional ddb | stack
x86/x86/tsc.c standard
x86/x86/delay.c standard
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
x86/xen/hvm.c optional xenhvm
x86/xen/xen_intr.c optional xenhvm
x86/xen/pv.c optional xenhvm
x86/xen/pvcpu_enum.c optional xenhvm
x86/xen/xen_apic.c optional xenhvm
x86/xen/xenpv.c optional xenhvm
x86/xen/xen_nexus.c optional xenhvm
msi: add Xen MSI implementation This patch adds support for MSI interrupts when running on Xen. Apart from adding the Xen related code needed in order to register MSI interrupts this patch also makes the msi_init function a hook in init_ops, so different MSI implementations can have different initialization functions. Sponsored by: Citrix Systems R&D xen/interface/physdev.h: - Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen public interface. x86/include/init.h: - Add a hook for setting custom msi_init methods. amd64/amd64/machdep.c: i386/i386/machdep.c: - Set the default msi_init hook to point to the native MSI initialization method. x86/xen/pv.c: - Set the Xen MSI init hook when running as a Xen guest. x86/x86/local_apic.c: - Call the msi_init hook instead of directly calling msi_init. xen/xen_intr.h: x86/xen/xen_intr.c: - Introduce support for registering/releasing MSI interrupts with Xen. - The MSI interrupts will use the same PIC as the IO APIC interrupts. xen/xen_msi.h: x86/xen/xen_msi.c: - Introduce a Xen MSI implementation. x86/xen/xen_nexus.c: - Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI implementation. x86/xen/xen_pci.c: - Introduce a Xen specific PCI bus that inherits from the ACPI PCI bus and overwrites the native MSI methods. - This is needed because when running under Xen the MSI messages used to configure MSI interrupts on PCI devices are written by Xen itself. dev/acpica/acpi_pci.c: - Lower the quality of the ACPI PCI bus so the newly introduced Xen PCI bus can take over when needed. conf/files.i386: conf/files.amd64: - Add the newly created files to the build process.
2014-09-30 16:46:45 +00:00
x86/xen/xen_msi.c optional xenhvm
x86/xen/xen_pci_bus.c optional xenhvm