d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a09968c479
freebsd-nq/sys/dev/random/dummy_rng.c

125 lines
3.2 KiB
C
Raw Normal View History

1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
/*-
* Copyright (c) 2013 Arthur Mesh <arthurmesh@gmail.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
#include <sys/fcntl.h>
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
#include <sys/kernel.h>
SNAPSHOT. Simplify the malloc pools; We only need one for this device. Simplify the harvest queue. Marginally improve the entropy pool hashing, making it a bit faster in the process. Connect up the hardware "live" source harvesting. This is simplistic for now, and will need to be made rate-adaptive. All of the above passes a compile test but needs to be debugged.
2013-10-06 09:55:28 +00:00
#include <sys/malloc.h>
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
#include <sys/module.h>
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
#include <sys/random.h>
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
#include <sys/selinfo.h>
#include <sys/systm.h>
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
#include <sys/time.h>
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
#include <dev/random/random_adaptors.h>
#include <dev/random/randomdev.h>
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
static struct mtx dummy_random_mtx;
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
/* Used to fake out unused random calls in random_adaptor */
static void
random_null_func(void)
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
{
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
}
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
static int
dummy_random_poll(int events __unused, struct thread *td __unused)
{
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
return (0);
}
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
static int
dummy_random_block(int flag)
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
{
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
int error = 0;
mtx_lock(&dummy_random_mtx);
/* Blocking logic */
while (!error) {
if (flag & O_NONBLOCK)
error = EWOULDBLOCK;
else {
printf("random: dummy device blocking on read.\n");
error = msleep(&dummy_random_block,
&dummy_random_mtx,
PUSER | PCATCH, "block", 0);
}
}
mtx_unlock(&dummy_random_mtx);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
return (error);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
}
static void
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
dummy_random_init(void)
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
{
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
mtx_init(&dummy_random_mtx, "sleep mtx for dummy_random",
NULL, MTX_DEF);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
}
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
static void
dummy_random_deinit(void)
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
{
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
mtx_destroy(&dummy_random_mtx);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
}
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
struct random_adaptor dummy_random = {
.ident = "Dummy entropy device that always blocks",
.init = dummy_random_init,
.deinit = dummy_random_deinit,
.block = dummy_random_block,
.poll = dummy_random_poll,
.read = (random_read_func_t *)random_null_func,
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
.reseed = (random_reseed_func_t *)random_null_func,
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
.seeded = 0, /* This device can never be seeded */
Fix a problem where the priority order of yarrow,dummy can get reversed to dummy,yarrow and break the usability of /dev/random. Fix the name of the tunable to something logical that 'sysctl kern.random' emits. Submitted by: des@ (the idea, code by me)
2013-10-12 23:15:06 +00:00
.priority = 1, /* Bottom priority, so goes to last position */
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
};
static int
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
dummy_random_modevent(module_t mod __unused, int type, void *unused __unused)
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
{
switch (type) {
case MOD_LOAD:
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
random_adaptor_register("dummy", &dummy_random);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
EVENTHANDLER_INVOKE(random_adaptor_attach,
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
&dummy_random);
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow Submitted by: Arthur Mesh <arthurmesh@gmail.com>
2013-08-24 13:54:56 +00:00
return (0);
}
return (EINVAL);
}
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
RANDOM_ADAPTOR_MODULE(dummy, dummy_random_modevent, 1);
Reference in New Issue Copy Permalink