freebsd-nq/sys/kern/kern_kse.c

1475 lines
36 KiB
C
Raw Normal View History

/*-
2002-06-29 07:04:59 +00:00
* Copyright (C) 2001 Julian Elischer <julian@freebsd.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice(s), this list of conditions and the following disclaimer as
* the first lines of this file unmodified other than the possible
2002-06-29 07:04:59 +00:00
* addition of one or more copyright notices.
* 2. Redistributions in binary form must reproduce the above copyright
* notice(s), this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
2002-06-29 07:04:59 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/imgact.h>
2002-06-29 07:04:59 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/proc.h>
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
#include <sys/ptrace.h>
#include <sys/smp.h>
#include <sys/syscallsubr.h>
#include <sys/sysproto.h>
#include <sys/sched.h>
2002-06-29 07:04:59 +00:00
#include <sys/signalvar.h>
Switch the sleep/wakeup and condition variable implementations to use the sleep queue interface: - Sleep queues attempt to merge some of the benefits of both sleep queues and condition variables. Having sleep qeueus in a hash table avoids having to allocate a queue head for each wait channel. Thus, struct cv has shrunk down to just a single char * pointer now. However, the hash table does not hold threads directly, but queue heads. This means that once you have located a queue in the hash bucket, you no longer have to walk the rest of the hash chain looking for threads. Instead, you have a list of all the threads sleeping on that wait channel. - Outside of the sleepq code and the sleep/cv code the kernel no longer differentiates between cv's and sleep/wakeup. For example, calls to abortsleep() and cv_abort() are replaced with a call to sleepq_abort(). Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and cv_waitq_remove() have been replaced with calls to sleepq_remove(). - The sched_sleep() function no longer accepts a priority argument as sleep's no longer inherently bump the priority. Instead, this is soley a propery of msleep() which explicitly calls sched_prio() before blocking. - The TDF_ONSLEEPQ flag has been dropped as it was never used. The associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been dropped and replaced with a single explicit clearing of td_wchan. TD_SET_ONSLEEPQ() would really have only made sense if it had taken the wait channel and message as arguments anyway. Now that that only happens in one place, a macro would be overkill.
2004-02-27 18:52:44 +00:00
#include <sys/sleepqueue.h>
2002-06-29 07:04:59 +00:00
#include <sys/kse.h>
#include <sys/ktr.h>
#include <vm/uma.h>
2002-06-29 07:04:59 +00:00
/*
* KSEGRP related storage.
2002-06-29 07:04:59 +00:00
*/
static uma_zone_t upcall_zone;
2002-06-29 07:04:59 +00:00
/* DEBUG ONLY */
extern int virtual_cpu;
extern int thread_debug;
2004-06-11 17:48:20 +00:00
extern int max_threads_per_proc;
extern int max_groups_per_proc;
extern int max_threads_hits;
extern struct mtx kse_zombie_lock;
TAILQ_HEAD(, kse_upcall) zombie_upcalls =
TAILQ_HEAD_INITIALIZER(zombie_upcalls);
2002-06-29 07:04:59 +00:00
static int thread_update_usr_ticks(struct thread *td);
2004-08-02 23:48:43 +00:00
static void thread_alloc_spare(struct thread *td);
struct kse_upcall *
upcall_alloc(void)
{
struct kse_upcall *ku;
ku = uma_zalloc(upcall_zone, M_WAITOK | M_ZERO);
return (ku);
}
void
upcall_free(struct kse_upcall *ku)
{
uma_zfree(upcall_zone, ku);
}
void
upcall_link(struct kse_upcall *ku, struct ksegrp *kg)
{
mtx_assert(&sched_lock, MA_OWNED);
TAILQ_INSERT_TAIL(&kg->kg_upcalls, ku, ku_link);
ku->ku_ksegrp = kg;
kg->kg_numupcalls++;
}
void
upcall_unlink(struct kse_upcall *ku)
{
struct ksegrp *kg = ku->ku_ksegrp;
mtx_assert(&sched_lock, MA_OWNED);
KASSERT(ku->ku_owner == NULL, ("%s: have owner", __func__));
TAILQ_REMOVE(&kg->kg_upcalls, ku, ku_link);
kg->kg_numupcalls--;
upcall_stash(ku);
}
void
upcall_remove(struct thread *td)
{
mtx_assert(&sched_lock, MA_OWNED);
2004-09-22 15:24:33 +00:00
if (td->td_upcall != NULL) {
td->td_upcall->ku_owner = NULL;
upcall_unlink(td->td_upcall);
2004-09-22 15:24:33 +00:00
td->td_upcall = NULL;
}
}
#ifndef _SYS_SYSPROTO_H_
struct kse_switchin_args {
struct kse_thr_mailbox *tmbx;
int flags;
};
#endif
int
kse_switchin(struct thread *td, struct kse_switchin_args *uap)
{
struct kse_thr_mailbox tmbx;
struct kse_upcall *ku;
int error;
if ((ku = td->td_upcall) == NULL || TD_CAN_UNBIND(td))
return (EINVAL);
error = (uap->tmbx == NULL) ? EINVAL : 0;
if (!error)
error = copyin(uap->tmbx, &tmbx, sizeof(tmbx));
if (!error && (uap->flags & KSE_SWITCHIN_SETTMBX))
error = (suword(&ku->ku_mailbox->km_curthread,
(long)uap->tmbx) != 0 ? EINVAL : 0);
if (!error)
error = set_mcontext(td, &tmbx.tm_context.uc_mcontext);
if (!error) {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
suword32(&uap->tmbx->tm_lwp, td->td_tid);
if (uap->flags & KSE_SWITCHIN_SETTMBX) {
td->td_mailbox = uap->tmbx;
td->td_pflags |= TDP_CAN_UNBIND;
}
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (td->td_proc->p_flag & P_TRACED) {
if (tmbx.tm_dflags & TMDF_SSTEP)
ptrace_single_step(td);
else
ptrace_clear_single_step(td);
if (tmbx.tm_dflags & TMDF_SUSPEND) {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
mtx_lock_spin(&sched_lock);
/* fuword can block, check again */
if (td->td_upcall)
ku->ku_flags |= KUF_DOUPCALL;
mtx_unlock_spin(&sched_lock);
}
}
}
return ((error == 0) ? EJUSTRETURN : error);
}
/*
struct kse_thr_interrupt_args {
struct kse_thr_mailbox * tmbx;
int cmd;
long data;
};
*/
int
kse_thr_interrupt(struct thread *td, struct kse_thr_interrupt_args *uap)
{
struct kse_execve_args args;
struct image_args iargs;
struct proc *p;
struct thread *td2;
struct kse_upcall *ku;
struct kse_thr_mailbox *tmbx;
uint32_t flags;
int error;
2002-10-31 08:00:51 +00:00
p = td->td_proc;
if (!(p->p_flag & P_SA))
2002-10-30 05:09:29 +00:00
return (EINVAL);
switch (uap->cmd) {
case KSE_INTR_SENDSIG:
if (uap->data < 0 || uap->data > _SIG_MAXSIG)
return (EINVAL);
case KSE_INTR_INTERRUPT:
case KSE_INTR_RESTART:
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
FOREACH_THREAD_IN_PROC(p, td2) {
if (td2->td_mailbox == uap->tmbx)
break;
}
if (td2 == NULL) {
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
return (ESRCH);
}
if (uap->cmd == KSE_INTR_SENDSIG) {
if (uap->data > 0) {
td2->td_flags &= ~TDF_INTERRUPT;
mtx_unlock_spin(&sched_lock);
tdsignal(td2, (int)uap->data, SIGTARGET_TD);
} else {
mtx_unlock_spin(&sched_lock);
}
} else {
td2->td_flags |= TDF_INTERRUPT | TDF_ASTPENDING;
if (TD_CAN_UNBIND(td2))
td2->td_upcall->ku_flags |= KUF_DOUPCALL;
if (uap->cmd == KSE_INTR_INTERRUPT)
td2->td_intrval = EINTR;
else
td2->td_intrval = ERESTART;
Switch the sleep/wakeup and condition variable implementations to use the sleep queue interface: - Sleep queues attempt to merge some of the benefits of both sleep queues and condition variables. Having sleep qeueus in a hash table avoids having to allocate a queue head for each wait channel. Thus, struct cv has shrunk down to just a single char * pointer now. However, the hash table does not hold threads directly, but queue heads. This means that once you have located a queue in the hash bucket, you no longer have to walk the rest of the hash chain looking for threads. Instead, you have a list of all the threads sleeping on that wait channel. - Outside of the sleepq code and the sleep/cv code the kernel no longer differentiates between cv's and sleep/wakeup. For example, calls to abortsleep() and cv_abort() are replaced with a call to sleepq_abort(). Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and cv_waitq_remove() have been replaced with calls to sleepq_remove(). - The sched_sleep() function no longer accepts a priority argument as sleep's no longer inherently bump the priority. Instead, this is soley a propery of msleep() which explicitly calls sched_prio() before blocking. - The TDF_ONSLEEPQ flag has been dropped as it was never used. The associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been dropped and replaced with a single explicit clearing of td_wchan. TD_SET_ONSLEEPQ() would really have only made sense if it had taken the wait channel and message as arguments anyway. Now that that only happens in one place, a macro would be overkill.
2004-02-27 18:52:44 +00:00
if (TD_ON_SLEEPQ(td2) && (td2->td_flags & TDF_SINTR))
sleepq_abort(td2);
mtx_unlock_spin(&sched_lock);
}
PROC_UNLOCK(p);
break;
case KSE_INTR_SIGEXIT:
if (uap->data < 1 || uap->data > _SIG_MAXSIG)
return (EINVAL);
PROC_LOCK(p);
sigexit(td, (int)uap->data);
break;
case KSE_INTR_DBSUSPEND:
/* this sub-function is only for bound thread */
if (td->td_pflags & TDP_SA)
return (EINVAL);
ku = td->td_upcall;
tmbx = (void *)fuword((void *)&ku->ku_mailbox->km_curthread);
if (tmbx == NULL || tmbx == (void *)-1)
return (EINVAL);
flags = 0;
while ((p->p_flag & P_TRACED) && !(p->p_flag & P_SINGLE_EXIT)) {
flags = fuword32(&tmbx->tm_dflags);
if (!(flags & TMDF_SUSPEND))
break;
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
thread_stopped(p);
thread_suspend_one(td);
PROC_UNLOCK(p);
mi_switch(SW_VOL, NULL);
mtx_unlock_spin(&sched_lock);
}
return (0);
case KSE_INTR_EXECVE:
error = copyin((void *)uap->data, &args, sizeof(args));
if (error)
return (error);
error = exec_copyin_args(&iargs, args.path, UIO_USERSPACE,
args.argv, args.envp);
if (error == 0)
error = kern_execve(td, &iargs, NULL);
exec_free_args(&iargs);
if (error == 0) {
PROC_LOCK(p);
SIGSETOR(td->td_siglist, args.sigpend);
PROC_UNLOCK(p);
kern_sigprocmask(td, SIG_SETMASK, &args.sigmask, NULL,
0);
}
return (error);
default:
return (EINVAL);
}
return (0);
}
/*
struct kse_exit_args {
register_t dummy;
};
*/
int
kse_exit(struct thread *td, struct kse_exit_args *uap)
{
struct proc *p;
struct ksegrp *kg;
struct kse_upcall *ku, *ku2;
int error, count;
p = td->td_proc;
2004-06-11 17:48:20 +00:00
/*
* Ensure that this is only called from the UTS
*/
if ((ku = td->td_upcall) == NULL || TD_CAN_UNBIND(td))
2002-10-30 03:01:28 +00:00
return (EINVAL);
2004-06-11 17:48:20 +00:00
kg = td->td_ksegrp;
count = 0;
2004-06-11 17:48:20 +00:00
/*
* Calculate the existing non-exiting upcalls in this ksegroup.
* If we are the last upcall but there are still other threads,
* then do not exit. We need the other threads to be able to
* complete whatever they are doing.
* XXX This relies on the userland knowing what to do if we return.
* It may be a better choice to convert ourselves into a kse_release
* ( or similar) and wait in the kernel to be needed.
*/
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
FOREACH_UPCALL_IN_GROUP(kg, ku2) {
if (ku2->ku_flags & KUF_EXITING)
count++;
}
if ((kg->kg_numupcalls - count) == 1 &&
(kg->kg_numthreads > 1)) {
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
return (EDEADLK);
}
ku->ku_flags |= KUF_EXITING;
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
2004-06-11 17:48:20 +00:00
/*
* Mark the UTS mailbox as having been finished with.
* If that fails then just go for a segfault.
* XXX need to check it that can be deliverred without a mailbox.
*/
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
error = suword32(&ku->ku_mailbox->km_flags, ku->ku_mflags|KMF_DONE);
if (!(td->td_pflags & TDP_SA))
if (suword32(&td->td_mailbox->tm_lwp, 0))
error = EFAULT;
PROC_LOCK(p);
if (error)
psignal(p, SIGSEGV);
mtx_lock_spin(&sched_lock);
upcall_remove(td);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
if (p->p_numthreads != 1) {
/*
* If we are not the last thread, but we are the last
* thread in this ksegrp, then by definition this is not
* the last group and we need to clean it up as well.
* thread_exit will clean up the kseg as needed.
*/
thread_stopped(p);
thread_exit();
/* NOTREACHED */
}
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
/*
* This is the last thread. Just return to the user.
* We know that there is only one ksegrp too, as any others
* would have been discarded in previous calls to thread_exit().
* Effectively we have left threading mode..
* The only real thing left to do is ensure that the
* scheduler sets out concurrency back to 1 as that may be a
* resource leak otherwise.
* This is an A[PB]I issue.. what SHOULD we do?
* One possibility is to return to the user. It may not cope well.
* The other possibility would be to let the process exit.
*/
thread_unthread(td);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
#if 1
2002-10-30 03:01:28 +00:00
return (0);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
#else
exit1(td, 0);
#endif
}
/*
* Either becomes an upcall or waits for an awakening event and
* then becomes an upcall. Only error cases return.
*/
/*
struct kse_release_args {
struct timespec *timeout;
};
*/
int
kse_release(struct thread *td, struct kse_release_args *uap)
{
struct proc *p;
struct ksegrp *kg;
struct kse_upcall *ku;
struct timespec timeout;
struct timeval tv;
sigset_t sigset;
int error;
p = td->td_proc;
kg = td->td_ksegrp;
if ((ku = td->td_upcall) == NULL || TD_CAN_UNBIND(td))
return (EINVAL);
if (uap->timeout != NULL) {
if ((error = copyin(uap->timeout, &timeout, sizeof(timeout))))
return (error);
TIMESPEC_TO_TIMEVAL(&tv, &timeout);
}
if (td->td_pflags & TDP_SA)
td->td_pflags |= TDP_UPCALLING;
else {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
ku->ku_mflags = fuword32(&ku->ku_mailbox->km_flags);
if (ku->ku_mflags == -1) {
PROC_LOCK(p);
sigexit(td, SIGSEGV);
}
}
PROC_LOCK(p);
if (ku->ku_mflags & KMF_WAITSIGEVENT) {
/* UTS wants to wait for signal event */
if (!(p->p_flag & P_SIGEVENT) &&
!(ku->ku_flags & KUF_DOUPCALL)) {
td->td_kflags |= TDK_KSERELSIG;
error = msleep(&p->p_siglist, &p->p_mtx, PPAUSE|PCATCH,
"ksesigwait", (uap->timeout ? tvtohz(&tv) : 0));
td->td_kflags &= ~(TDK_KSERELSIG | TDK_WAKEUP);
}
p->p_flag &= ~P_SIGEVENT;
sigset = p->p_siglist;
PROC_UNLOCK(p);
error = copyout(&sigset, &ku->ku_mailbox->km_sigscaught,
sizeof(sigset));
} else {
if ((ku->ku_flags & KUF_DOUPCALL) == 0 &&
((ku->ku_mflags & KMF_NOCOMPLETED) ||
(kg->kg_completed == NULL))) {
kg->kg_upsleeps++;
td->td_kflags |= TDK_KSEREL;
error = msleep(&kg->kg_completed, &p->p_mtx,
PPAUSE|PCATCH, "kserel",
(uap->timeout ? tvtohz(&tv) : 0));
td->td_kflags &= ~(TDK_KSEREL | TDK_WAKEUP);
kg->kg_upsleeps--;
}
PROC_UNLOCK(p);
}
if (ku->ku_flags & KUF_DOUPCALL) {
mtx_lock_spin(&sched_lock);
ku->ku_flags &= ~KUF_DOUPCALL;
mtx_unlock_spin(&sched_lock);
}
return (0);
}
/* struct kse_wakeup_args {
struct kse_mailbox *mbx;
}; */
int
kse_wakeup(struct thread *td, struct kse_wakeup_args *uap)
{
struct proc *p;
struct ksegrp *kg;
struct kse_upcall *ku;
struct thread *td2;
p = td->td_proc;
td2 = NULL;
ku = NULL;
/* KSE-enabled processes only, please. */
if (!(p->p_flag & P_SA))
return (EINVAL);
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
if (uap->mbx) {
FOREACH_KSEGRP_IN_PROC(p, kg) {
FOREACH_UPCALL_IN_GROUP(kg, ku) {
if (ku->ku_mailbox == uap->mbx)
break;
}
if (ku)
break;
}
} else {
kg = td->td_ksegrp;
if (kg->kg_upsleeps) {
mtx_unlock_spin(&sched_lock);
wakeup(&kg->kg_completed);
PROC_UNLOCK(p);
return (0);
}
ku = TAILQ_FIRST(&kg->kg_upcalls);
}
if (ku == NULL) {
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
return (ESRCH);
}
if ((td2 = ku->ku_owner) == NULL) {
mtx_unlock_spin(&sched_lock);
panic("%s: no owner", __func__);
} else if (td2->td_kflags & (TDK_KSEREL | TDK_KSERELSIG)) {
mtx_unlock_spin(&sched_lock);
if (!(td2->td_kflags & TDK_WAKEUP)) {
td2->td_kflags |= TDK_WAKEUP;
if (td2->td_kflags & TDK_KSEREL)
sleepq_remove(td2, &kg->kg_completed);
else
sleepq_remove(td2, &p->p_siglist);
}
} else {
ku->ku_flags |= KUF_DOUPCALL;
mtx_unlock_spin(&sched_lock);
}
PROC_UNLOCK(p);
return (0);
}
/*
* No new KSEG: first call: use current KSE, don't schedule an upcall
* All other situations, do allocate max new KSEs and schedule an upcall.
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
*
* XXX should be changed so that 'first' behaviour lasts for as long
* as you have not made a kse in this ksegrp. i.e. as long as we do not have
* a mailbox..
*/
/* struct kse_create_args {
struct kse_mailbox *mbx;
int newgroup;
}; */
int
kse_create(struct thread *td, struct kse_create_args *uap)
{
struct ksegrp *newkg;
struct ksegrp *kg;
struct proc *p;
struct kse_mailbox mbx;
struct kse_upcall *newku;
int err, ncpus, sa = 0, first = 0;
struct thread *newtd;
p = td->td_proc;
kg = td->td_ksegrp;
if ((err = copyin(uap->mbx, &mbx, sizeof(mbx))))
return (err);
ncpus = mp_ncpus;
if (virtual_cpu != 0)
ncpus = virtual_cpu;
/*
* If the new UTS mailbox says that this
* will be a BOUND lwp, then it had better
* have its thread mailbox already there.
* In addition, this ksegrp will be limited to
* a concurrency of 1. There is more on this later.
*/
if (mbx.km_flags & KMF_BOUND) {
if (mbx.km_curthread == NULL)
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
return (EINVAL);
ncpus = 1;
} else {
sa = TDP_SA;
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
}
2003-03-11 03:16:02 +00:00
PROC_LOCK(p);
/*
* Processes using the other threading model can't
* suddenly start calling this one
*/
if ((p->p_flag & (P_SA|P_HADTHREADS)) == P_HADTHREADS) {
PROC_UNLOCK(p);
return (EINVAL);
}
/*
* Limit it to NCPU upcall contexts per ksegrp in any case.
* There is a small race here as we don't hold proclock
* until we inc the ksegrp count, but it's not really a big problem
* if we get one too many, but we save a proc lock.
*/
if ((!uap->newgroup) && (kg->kg_numupcalls >= ncpus)) {
PROC_UNLOCK(p);
return (EPROCLIM);
}
if (!(p->p_flag & P_SA)) {
first = 1;
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
p->p_flag |= P_SA|P_HADTHREADS;
}
2003-03-11 03:16:02 +00:00
PROC_UNLOCK(p);
/*
* Now pay attention!
* If we are going to be bound, then we need to be either
* a new group, or the first call ever. In either
* case we will be creating (or be) the only thread in a group.
* and the concurrency will be set to 1.
* This is not quite right, as we may still make ourself
* bound after making other ksegrps but it will do for now.
* The library will only try do this much.
*/
if (!sa && !(uap->newgroup || first))
return (EINVAL);
if (uap->newgroup) {
newkg = ksegrp_alloc();
bzero(&newkg->kg_startzero,
__rangeof(struct ksegrp, kg_startzero, kg_endzero));
bcopy(&kg->kg_startcopy, &newkg->kg_startcopy,
__rangeof(struct ksegrp, kg_startcopy, kg_endcopy));
sched_init_concurrency(newkg);
PROC_LOCK(p);
if (p->p_numksegrps >= max_groups_per_proc) {
PROC_UNLOCK(p);
ksegrp_free(newkg);
return (EPROCLIM);
}
ksegrp_link(newkg, p);
mtx_lock_spin(&sched_lock);
sched_fork_ksegrp(td, newkg);
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
} else {
/*
* We want to make a thread in our own ksegrp.
* If we are just the first call, either kind
* is ok, but if not then either we must be
* already an upcallable thread to make another,
* or a bound thread to make one of those.
* Once again, not quite right but good enough for now.. XXXKSE
*/
if (!first && ((td->td_pflags & TDP_SA) != sa))
return (EINVAL);
newkg = kg;
}
/*
* This test is a bit "indirect".
* It might simplify things if we made a direct way of testing
* if a ksegrp has been worked on before.
* In the case of a bound request and the concurrency being set to
* one, the concurrency will already be 1 so it's just inefficient
* but not dangerous to call this again. XXX
*/
if (newkg->kg_numupcalls == 0) {
/*
* Initialize KSE group with the appropriate
* concurrency.
*
* For a multiplexed group, create as as much concurrency
* as the number of physical cpus.
* This increases concurrency in the kernel even if the
* userland is not MP safe and can only run on a single CPU.
* In an ideal world, every physical cpu should execute a
* thread. If there is enough concurrency, threads in the
* kernel can be executed parallel on different cpus at
* full speed without being restricted by the number of
* upcalls the userland provides.
* Adding more upcall structures only increases concurrency
* in userland.
*
* For a bound thread group, because there is only one thread
* in the group, we only set the concurrency for the group
* to 1. A thread in this kind of group will never schedule
* an upcall when blocked. This simulates pthread system
* scope thread behaviour.
*/
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
sched_set_concurrency(newkg, ncpus);
}
/*
* Even bound LWPs get a mailbox and an upcall to hold it.
*/
newku = upcall_alloc();
newku->ku_mailbox = uap->mbx;
newku->ku_func = mbx.km_func;
bcopy(&mbx.km_stack, &newku->ku_stack, sizeof(stack_t));
/*
* For the first call this may not have been set.
* Of course nor may it actually be needed.
*/
if (td->td_standin == NULL)
2004-08-02 23:48:43 +00:00
thread_alloc_spare(td);
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
if (newkg->kg_numupcalls >= ncpus) {
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
upcall_free(newku);
return (EPROCLIM);
}
/*
* If we are the first time, and a normal thread,
2004-09-22 15:24:33 +00:00
* then transfer all the signals back to the 'process'.
* SA threading will make a special thread to handle them.
*/
if (first && sa) {
SIGSETOR(p->p_siglist, td->td_siglist);
SIGEMPTYSET(td->td_siglist);
SIGFILLSET(td->td_sigmask);
SIG_CANTMASK(td->td_sigmask);
}
/*
2004-09-22 15:24:33 +00:00
* Make the new upcall available to the ksegrp.
* It may or may not use it, but it's available.
*/
PROC_UNLOCK(p);
upcall_link(newku, newkg);
if (mbx.km_quantum)
2004-09-22 15:24:33 +00:00
newkg->kg_upquantum = max(1, mbx.km_quantum / tick);
/*
* Each upcall structure has an owner thread, find which
* one owns it.
*/
if (uap->newgroup) {
/*
* Because the new ksegrp hasn't a thread,
* create an initial upcall thread to own it.
*/
newtd = thread_schedule_upcall(td, newku);
} else {
/*
* If the current thread hasn't an upcall structure,
* just assign the upcall to it.
* It'll just return.
*/
if (td->td_upcall == NULL) {
newku->ku_owner = td;
td->td_upcall = newku;
newtd = td;
} else {
/*
* Create a new upcall thread to own it.
*/
newtd = thread_schedule_upcall(td, newku);
}
}
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
mtx_unlock_spin(&sched_lock);
/*
* Let the UTS instance know its LWPID.
* It doesn't really care. But the debugger will.
*/
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
suword32(&newku->ku_mailbox->km_lwp, newtd->td_tid);
/*
* In the same manner, if the UTS has a current user thread,
* then it is also running on this LWP so set it as well.
* The library could do that of course.. but why not..
*/
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (mbx.km_curthread)
suword32(&mbx.km_curthread->tm_lwp, newtd->td_tid);
if (sa) {
newtd->td_pflags |= TDP_SA;
} else {
newtd->td_pflags &= ~TDP_SA;
/*
* Since a library will use the mailbox pointer to
* identify even a bound thread, and the mailbox pointer
* will never be allowed to change after this syscall
* for a bound thread, set it here so the library can
* find the thread after the syscall returns.
*/
newtd->td_mailbox = mbx.km_curthread;
if (newtd != td) {
/*
* If we did create a new thread then
* make sure it goes to the right place
* when it starts up, and make sure that it runs
* at full speed when it gets there.
* thread_schedule_upcall() copies all cpu state
* to the new thread, so we should clear single step
* flag here.
*/
cpu_set_upcall_kse(newtd, newku);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (p->p_flag & P_TRACED)
ptrace_clear_single_step(newtd);
}
}
/*
* If we are starting a new thread, kick it off.
*/
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (newtd != td) {
mtx_lock_spin(&sched_lock);
setrunqueue(newtd, SRQ_BORING);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
mtx_unlock_spin(&sched_lock);
}
return (0);
}
2002-06-29 07:04:59 +00:00
/*
2004-06-11 17:48:20 +00:00
* Initialize global thread allocation resources.
2002-06-29 07:04:59 +00:00
*/
void
kseinit(void)
2002-06-29 07:04:59 +00:00
{
upcall_zone = uma_zcreate("UPCALL", sizeof(struct kse_upcall),
NULL, NULL, NULL, NULL, UMA_ALIGN_CACHE, 0);
2002-06-29 07:04:59 +00:00
}
/*
* Stash an embarasingly extra upcall into the zombie upcall queue.
*/
void
upcall_stash(struct kse_upcall *ku)
{
mtx_lock_spin(&kse_zombie_lock);
TAILQ_INSERT_HEAD(&zombie_upcalls, ku, ku_link);
mtx_unlock_spin(&kse_zombie_lock);
}
/*
* Reap zombie kse resource.
2002-06-29 07:04:59 +00:00
*/
void
kse_GC(void)
2002-06-29 07:04:59 +00:00
{
struct kse_upcall *ku_first, *ku_next;
2002-06-29 07:04:59 +00:00
/*
* Don't even bother to lock if none at this instant,
* we really don't care about the next instant..
2002-06-29 07:04:59 +00:00
*/
2004-06-11 17:48:20 +00:00
if (!TAILQ_EMPTY(&zombie_upcalls)) {
mtx_lock_spin(&kse_zombie_lock);
ku_first = TAILQ_FIRST(&zombie_upcalls);
if (ku_first)
TAILQ_INIT(&zombie_upcalls);
mtx_unlock_spin(&kse_zombie_lock);
while (ku_first) {
ku_next = TAILQ_NEXT(ku_first, ku_link);
upcall_free(ku_first);
ku_first = ku_next;
}
2002-06-29 07:04:59 +00:00
}
}
/*
* Store the thread context in the UTS's mailbox.
* then add the mailbox at the head of a list we are building in user space.
* The list is anchored in the ksegrp structure.
2002-06-29 07:04:59 +00:00
*/
int
thread_export_context(struct thread *td, int willexit)
2002-06-29 07:04:59 +00:00
{
struct proc *p;
struct ksegrp *kg;
uintptr_t mbx;
void *addr;
int error = 0, sig;
mcontext_t mc;
2002-06-29 07:04:59 +00:00
p = td->td_proc;
kg = td->td_ksegrp;
/*
* Post sync signal, or process SIGKILL and SIGSTOP.
* For sync signal, it is only possible when the signal is not
* caught by userland or process is being debugged.
*/
PROC_LOCK(p);
if (td->td_flags & TDF_NEEDSIGCHK) {
mtx_lock_spin(&sched_lock);
td->td_flags &= ~TDF_NEEDSIGCHK;
mtx_unlock_spin(&sched_lock);
mtx_lock(&p->p_sigacts->ps_mtx);
while ((sig = cursig(td)) != 0)
postsig(sig);
mtx_unlock(&p->p_sigacts->ps_mtx);
}
if (willexit)
SIGFILLSET(td->td_sigmask);
PROC_UNLOCK(p);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
/* Export the user/machine context. */
get_mcontext(td, &mc, 0);
addr = (void *)(&td->td_mailbox->tm_context.uc_mcontext);
error = copyout(&mc, addr, sizeof(mcontext_t));
if (error)
goto bad;
addr = (caddr_t)(&td->td_mailbox->tm_lwp);
if (suword32(addr, 0)) {
error = EFAULT;
goto bad;
}
/* Get address in latest mbox of list pointer */
addr = (void *)(&td->td_mailbox->tm_next);
/*
* Put the saved address of the previous first
* entry into this one
*/
for (;;) {
mbx = (uintptr_t)kg->kg_completed;
if (suword(addr, mbx)) {
error = EFAULT;
goto bad;
}
PROC_LOCK(p);
if (mbx == (uintptr_t)kg->kg_completed) {
kg->kg_completed = td->td_mailbox;
/*
* The thread context may be taken away by
* other upcall threads when we unlock
* process lock. it's no longer valid to
* use it again in any other places.
*/
td->td_mailbox = NULL;
PROC_UNLOCK(p);
break;
}
PROC_UNLOCK(p);
}
td->td_usticks = 0;
return (0);
bad:
PROC_LOCK(p);
sigexit(td, SIGILL);
return (error);
2002-06-29 07:04:59 +00:00
}
/*
* Take the list of completed mailboxes for this KSEGRP and put them on this
* upcall's mailbox as it's the next one going up.
*/
static int
thread_link_mboxes(struct ksegrp *kg, struct kse_upcall *ku)
{
struct proc *p = kg->kg_proc;
void *addr;
uintptr_t mbx;
addr = (void *)(&ku->ku_mailbox->km_completed);
for (;;) {
mbx = (uintptr_t)kg->kg_completed;
if (suword(addr, mbx)) {
PROC_LOCK(p);
psignal(p, SIGSEGV);
PROC_UNLOCK(p);
return (EFAULT);
}
PROC_LOCK(p);
if (mbx == (uintptr_t)kg->kg_completed) {
kg->kg_completed = NULL;
PROC_UNLOCK(p);
break;
}
PROC_UNLOCK(p);
}
return (0);
}
2002-06-29 07:04:59 +00:00
/*
* This function should be called at statclock interrupt time
*/
int
thread_statclock(int user)
{
struct thread *td = curthread;
if (!(td->td_pflags & TDP_SA))
return (0);
if (user) {
/* Current always do via ast() */
mtx_lock_spin(&sched_lock);
td->td_flags |= TDF_ASTPENDING;
mtx_unlock_spin(&sched_lock);
td->td_uuticks++;
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
} else if (td->td_mailbox != NULL)
td->td_usticks++;
return (0);
}
/*
* Export state clock ticks for userland
*/
static int
thread_update_usr_ticks(struct thread *td)
{
struct proc *p = td->td_proc;
caddr_t addr;
u_int uticks;
if (td->td_mailbox == NULL)
return (-1);
if ((uticks = td->td_uuticks) != 0) {
td->td_uuticks = 0;
addr = (caddr_t)&td->td_mailbox->tm_uticks;
if (suword32(addr, uticks+fuword32(addr)))
goto error;
}
if ((uticks = td->td_usticks) != 0) {
td->td_usticks = 0;
addr = (caddr_t)&td->td_mailbox->tm_sticks;
if (suword32(addr, uticks+fuword32(addr)))
goto error;
}
return (0);
error:
PROC_LOCK(p);
psignal(p, SIGSEGV);
PROC_UNLOCK(p);
return (-2);
}
/*
* This function is intended to be used to initialize a spare thread
* for upcall. Initialize thread's large data area outside sched_lock
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
* for thread_schedule_upcall(). The crhold is also here to get it out
* from the schedlock as it has a mutex op itself.
* XXX BUG.. we need to get the cr ref after the thread has
* checked and chenged its own, not 6 months before...
*/
void
2004-08-02 23:48:43 +00:00
thread_alloc_spare(struct thread *td)
{
struct thread *spare;
if (td->td_standin)
return;
2004-08-02 23:48:43 +00:00
spare = thread_alloc();
td->td_standin = spare;
bzero(&spare->td_startzero,
__rangeof(struct thread, td_startzero, td_endzero));
spare->td_proc = td->td_proc;
spare->td_ucred = crhold(td->td_ucred);
}
2002-06-29 07:04:59 +00:00
/*
* Create a thread and schedule it for upcall on the KSE given.
* Use our thread's standin so that we don't have to allocate one.
2002-06-29 07:04:59 +00:00
*/
struct thread *
thread_schedule_upcall(struct thread *td, struct kse_upcall *ku)
2002-06-29 07:04:59 +00:00
{
struct thread *td2;
mtx_assert(&sched_lock, MA_OWNED);
/*
* Schedule an upcall thread on specified kse_upcall,
* the kse_upcall must be free.
* td must have a spare thread.
*/
KASSERT(ku->ku_owner == NULL, ("%s: upcall has owner", __func__));
if ((td2 = td->td_standin) != NULL) {
td->td_standin = NULL;
2002-06-29 07:04:59 +00:00
} else {
panic("no reserve thread when scheduling an upcall");
2002-10-30 03:01:28 +00:00
return (NULL);
2002-06-29 07:04:59 +00:00
}
CTR3(KTR_PROC, "thread_schedule_upcall: thread %p (pid %d, %s)",
td2, td->td_proc->p_pid, td->td_proc->p_comm);
/*
* Bzero already done in thread_alloc_spare() because we can't
* do the crhold here because we are in schedlock already.
*/
bcopy(&td->td_startcopy, &td2->td_startcopy,
__rangeof(struct thread, td_startcopy, td_endcopy));
thread_link(td2, ku->ku_ksegrp);
2004-06-11 17:48:20 +00:00
/* inherit parts of blocked thread's context as a good template */
cpu_set_upcall(td2, td);
/* Let the new thread become owner of the upcall */
ku->ku_owner = td2;
td2->td_upcall = ku;
td2->td_flags = 0;
td2->td_pflags = TDP_SA|TDP_UPCALLING;
td2->td_state = TDS_CAN_RUN;
td2->td_inhibitors = 0;
SIGFILLSET(td2->td_sigmask);
SIG_CANTMASK(td2->td_sigmask);
sched_fork_thread(td, td2);
return (td2); /* bogus.. should be a void function */
2002-06-29 07:04:59 +00:00
}
/*
* It is only used when thread generated a trap and process is being
* debugged.
*/
void
thread_signal_add(struct thread *td, int sig)
{
struct proc *p;
siginfo_t siginfo;
struct sigacts *ps;
int error;
p = td->td_proc;
PROC_LOCK_ASSERT(p, MA_OWNED);
ps = p->p_sigacts;
mtx_assert(&ps->ps_mtx, MA_OWNED);
cpu_thread_siginfo(sig, 0, &siginfo);
mtx_unlock(&ps->ps_mtx);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
SIGADDSET(td->td_sigmask, sig);
PROC_UNLOCK(p);
error = copyout(&siginfo, &td->td_mailbox->tm_syncsig, sizeof(siginfo));
if (error) {
PROC_LOCK(p);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
sigexit(td, SIGSEGV);
}
PROC_LOCK(p);
mtx_lock(&ps->ps_mtx);
}
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
#include "opt_sched.h"
struct thread *
thread_switchout(struct thread *td, int flags, struct thread *nextthread)
{
struct kse_upcall *ku;
struct thread *td2;
mtx_assert(&sched_lock, MA_OWNED);
/*
* If the outgoing thread is in threaded group and has never
* scheduled an upcall, decide whether this is a short
* or long term event and thus whether or not to schedule
* an upcall.
* If it is a short term event, just suspend it in
* a way that takes its KSE with it.
* Select the events for which we want to schedule upcalls.
* For now it's just sleep or if thread is suspended but
* process wide suspending flag is not set (debugger
* suspends thread).
* XXXKSE eventually almost any inhibition could do.
*/
if (TD_CAN_UNBIND(td) && (td->td_standin) &&
(TD_ON_SLEEPQ(td) || (TD_IS_SUSPENDED(td) &&
!P_SHOULDSTOP(td->td_proc)))) {
/*
* Release ownership of upcall, and schedule an upcall
* thread, this new upcall thread becomes the owner of
* the upcall structure. It will be ahead of us in the
* run queue, so as we are stopping, it should either
* start up immediatly, or at least before us if
* we release our slot.
*/
ku = td->td_upcall;
ku->ku_owner = NULL;
td->td_upcall = NULL;
td->td_pflags &= ~TDP_CAN_UNBIND;
td2 = thread_schedule_upcall(td, ku);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
if (flags & SW_INVOL || nextthread) {
setrunqueue(td2, SRQ_YIELDING);
} else {
/* Keep up with reality.. we have one extra thread
* in the picture.. and it's 'running'.
*/
return td2;
}
}
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
return (nextthread);
}
/*
* Setup done on the thread when it enters the kernel.
*/
void
thread_user_enter(struct thread *td)
{
struct proc *p = td->td_proc;
struct ksegrp *kg;
struct kse_upcall *ku;
struct kse_thr_mailbox *tmbx;
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
uint32_t flags;
/*
* First check that we shouldn't just abort. we
* can suspend it here or just exit.
*/
if (__predict_false(P_SHOULDSTOP(p))) {
PROC_LOCK(p);
thread_suspend_check(0);
PROC_UNLOCK(p);
}
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (!(td->td_pflags & TDP_SA))
return;
/*
* If we are doing a syscall in a KSE environment,
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
* note where our mailbox is.
*/
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
kg = td->td_ksegrp;
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
ku = td->td_upcall;
KASSERT(ku != NULL, ("no upcall owned"));
KASSERT(ku->ku_owner == td, ("wrong owner"));
KASSERT(!TD_CAN_UNBIND(td), ("can unbind"));
if (td->td_standin == NULL)
thread_alloc_spare(td);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
ku->ku_mflags = fuword32((void *)&ku->ku_mailbox->km_flags);
tmbx = (void *)fuword((void *)&ku->ku_mailbox->km_curthread);
if ((tmbx == NULL) || (tmbx == (void *)-1L) ||
(ku->ku_mflags & KMF_NOUPCALL)) {
td->td_mailbox = NULL;
} else {
flags = fuword32(&tmbx->tm_flags);
/*
* On some architectures, TP register points to thread
* mailbox but not points to kse mailbox, and userland
* can not atomically clear km_curthread, but can
* use TP register, and set TMF_NOUPCALL in thread
* flag to indicate a critical region.
*/
if (flags & TMF_NOUPCALL) {
td->td_mailbox = NULL;
} else {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
td->td_mailbox = tmbx;
td->td_pflags |= TDP_CAN_UNBIND;
if (__predict_false(p->p_flag & P_TRACED)) {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
flags = fuword32(&tmbx->tm_dflags);
if (flags & TMDF_SUSPEND) {
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
mtx_lock_spin(&sched_lock);
/* fuword can block, check again */
if (td->td_upcall)
ku->ku_flags |= KUF_DOUPCALL;
mtx_unlock_spin(&sched_lock);
}
}
}
}
}
/*
* The extra work we go through if we are a threaded process when we
* return to userland.
2002-06-29 07:04:59 +00:00
*
* If we are a KSE process and returning to user mode, check for
* extra work to do before we return (e.g. for more syscalls
* to complete first). If we were in a critical section, we should
* just return to let it finish. Same if we were in the UTS (in
* which case the mailbox's context's busy indicator will be set).
* The only traps we suport will have set the mailbox.
* We will clear it here.
2002-06-29 07:04:59 +00:00
*/
int
thread_userret(struct thread *td, struct trapframe *frame)
2002-06-29 07:04:59 +00:00
{
struct kse_upcall *ku;
struct ksegrp *kg, *kg2;
struct proc *p;
struct timespec ts;
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
int error = 0, upcalls, uts_crit;
2002-06-29 07:04:59 +00:00
/* Nothing to do with bound thread */
if (!(td->td_pflags & TDP_SA))
return (0);
/*
* Update stat clock count for userland
*/
if (td->td_mailbox != NULL) {
thread_update_usr_ticks(td);
uts_crit = 0;
} else {
uts_crit = 1;
}
p = td->td_proc;
kg = td->td_ksegrp;
ku = td->td_upcall;
/*
* Optimisation:
* This thread has not started any upcall.
* If there is no work to report other than ourself,
* then it can return direct to userland.
*/
if (TD_CAN_UNBIND(td)) {
td->td_pflags &= ~TDP_CAN_UNBIND;
if ((td->td_flags & TDF_NEEDSIGCHK) == 0 &&
(kg->kg_completed == NULL) &&
(ku->ku_flags & KUF_DOUPCALL) == 0 &&
2003-04-19 06:16:04 +00:00
(kg->kg_upquantum && ticks < kg->kg_nextupcall)) {
nanotime(&ts);
error = copyout(&ts,
(caddr_t)&ku->ku_mailbox->km_timeofday,
sizeof(ts));
td->td_mailbox = 0;
ku->ku_mflags = 0;
if (error)
goto out;
return (0);
}
thread_export_context(td, 0);
/*
* There is something to report, and we own an upcall
* strucuture, we can go to userland.
* Turn ourself into an upcall thread.
*/
td->td_pflags |= TDP_UPCALLING;
} else if (td->td_mailbox && (ku == NULL)) {
thread_export_context(td, 1);
PROC_LOCK(p);
if (kg->kg_upsleeps)
wakeup(&kg->kg_completed);
mtx_lock_spin(&sched_lock);
thread_stopped(p);
thread_exit();
/* NOTREACHED */
}
KASSERT(ku != NULL, ("upcall is NULL"));
KASSERT(TD_CAN_UNBIND(td) == 0, ("can unbind"));
if (p->p_numthreads > max_threads_per_proc) {
max_threads_hits++;
PROC_LOCK(p);
mtx_lock_spin(&sched_lock);
p->p_maxthrwaits++;
while (p->p_numthreads > max_threads_per_proc) {
upcalls = 0;
FOREACH_KSEGRP_IN_PROC(p, kg2) {
if (kg2->kg_numupcalls == 0)
upcalls++;
else
upcalls += kg2->kg_numupcalls;
}
if (upcalls >= max_threads_per_proc)
break;
2003-04-27 04:32:40 +00:00
mtx_unlock_spin(&sched_lock);
if (msleep(&p->p_numthreads, &p->p_mtx, PPAUSE|PCATCH,
"maxthreads", 0)) {
mtx_lock_spin(&sched_lock);
break;
} else {
mtx_lock_spin(&sched_lock);
}
}
p->p_maxthrwaits--;
mtx_unlock_spin(&sched_lock);
PROC_UNLOCK(p);
}
if (td->td_pflags & TDP_UPCALLING) {
uts_crit = 0;
2004-09-22 15:24:33 +00:00
kg->kg_nextupcall = ticks + kg->kg_upquantum;
/*
* There is no more work to do and we are going to ride
* this thread up to userland as an upcall.
* Do the last parts of the setup needed for the upcall.
*/
CTR3(KTR_PROC, "userret: upcall thread %p (pid %d, %s)",
td, td->td_proc->p_pid, td->td_proc->p_comm);
td->td_pflags &= ~TDP_UPCALLING;
if (ku->ku_flags & KUF_DOUPCALL) {
mtx_lock_spin(&sched_lock);
ku->ku_flags &= ~KUF_DOUPCALL;
mtx_unlock_spin(&sched_lock);
}
/*
* Set user context to the UTS
*/
if (!(ku->ku_mflags & KMF_NOUPCALL)) {
cpu_set_upcall_kse(td, ku);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (p->p_flag & P_TRACED)
ptrace_clear_single_step(td);
error = suword32(&ku->ku_mailbox->km_lwp,
td->td_tid);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (error)
goto out;
error = suword(&ku->ku_mailbox->km_curthread, 0);
if (error)
goto out;
}
/*
* Unhook the list of completed threads.
* anything that completes after this gets to
* come in next time.
* Put the list of completed thread mailboxes on
* this KSE's mailbox.
*/
if (!(ku->ku_mflags & KMF_NOCOMPLETED) &&
(error = thread_link_mboxes(kg, ku)) != 0)
goto out;
}
if (!uts_crit) {
nanotime(&ts);
error = copyout(&ts, &ku->ku_mailbox->km_timeofday, sizeof(ts));
}
out:
if (error) {
/*
2003-02-19 13:40:24 +00:00
* Things are going to be so screwed we should just kill
* the process.
* how do we do that?
*/
PROC_LOCK(p);
psignal(p, SIGSEGV);
PROC_UNLOCK(p);
} else {
/*
* Optimisation:
* Ensure that we have a spare thread available,
* for when we re-enter the kernel.
*/
if (td->td_standin == NULL)
thread_alloc_spare(td);
}
ku->ku_mflags = 0;
td->td_mailbox = NULL;
td->td_usticks = 0;
return (error); /* go sync */
2002-06-29 07:04:59 +00:00
}
int
thread_upcall_check(struct thread *td)
{
PROC_LOCK_ASSERT(td->td_proc, MA_OWNED);
if (td->td_kflags & TDK_WAKEUP)
return (1);
else
return (0);
}
2004-06-11 17:48:20 +00:00
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
/*
* called after ptrace resumed a process, force all
* virtual CPUs to schedule upcall for SA process,
* because debugger may have changed something in userland,
* we should notice UTS as soon as possible.
*/
void
thread_continued(struct proc *p)
{
struct ksegrp *kg;
struct kse_upcall *ku;
struct thread *td;
PROC_LOCK_ASSERT(p, MA_OWNED);
mtx_assert(&sched_lock, MA_OWNED);
if (!(p->p_flag & P_SA))
return;
if (p->p_flag & P_TRACED) {
FOREACH_KSEGRP_IN_PROC(p, kg) {
td = TAILQ_FIRST(&kg->kg_threads);
if (td == NULL)
continue;
/* not a SA group, nothing to do */
if (!(td->td_pflags & TDP_SA))
continue;
FOREACH_UPCALL_IN_GROUP(kg, ku) {
ku->ku_flags |= KUF_DOUPCALL;
wakeup(&kg->kg_completed);
Add code to support debugging threaded process. 1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel thread current user thread is running on. Add tm_dflags into kse_thr_mailbox, the flags is written by debugger, it tells UTS and kernel what should be done when the process is being debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER. TMDF_SSTEP is used to tell kernel to turn on single stepping, or turn off if it is not set. TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall whenever possible, to UTS, it means do not run the user thread until debugger clears it, this behaviour is necessary because gdb wants to resume only one thread when the thread's pc is at a breakpoint, and thread needs to go forward, in order to avoid other threads sneak pass the breakpoints, it needs to remove breakpoint, only wants one thread to go. Also, add km_lwp to kse_mailbox, the lwp id is copied to kse_thr_mailbox at context switch time when process is not being debugged, so when process is attached, debugger can map kernel thread to user thread. 2. Add p_xthread to proc strcuture and td_xsig to thread structure. p_xthread is used by a thread when it wants to report event to debugger, every thread can set the pointer, especially, when it is used in ptracestop, it is the last thread reporting event will win the race. Every thread has a td_xsig to exchange signal with debugger, thread uses TDF_XSIG flag to indicate it is reporting signal to debugger, if the flag is not cleared, thread will keep retrying until it is cleared by debugger, p_xthread may be used by debugger to indicate CURRENT thread. The p_xstat is still in proc structure to keep wait() to work, in future, we may just use td_xsig. 3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend a thread. When process stops, debugger can set the flag for thread, thread will check the flag in thread_suspend_check, enters a loop, unless it is cleared by debugger, process is detached or process is existing. The flag is also checked in ptracestop, so debugger can temporarily suspend a thread even if the thread wants to exchange signal. 4. Current, in ptrace, we always resume all threads, but if a thread has already a TDF_DBSUSPEND flag set by debugger, it won't run. Encouraged by: marcel, julian, deischen
2004-07-13 07:33:40 +00:00
if (TD_IS_SUSPENDED(ku->ku_owner)) {
thread_unsuspend_one(ku->ku_owner);
}
}
}
}
}