freebsd-nq/sbin/fsck_ffs/pass1.c

523 lines
14 KiB
C
Raw Normal View History

1995-05-30 06:12:45 +00:00
/*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)pass1.c 8.6 (Berkeley) 4/28/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/stat.h>
#include <sys/sysctl.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <ufs/ffs/fs.h>
#include <err.h>
#include <limits.h>
#include <stdint.h>
#include <string.h>
#include "fsck.h"
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static ufs2_daddr_t badblk;
static ufs2_daddr_t dupblk;
static ino_t lastino; /* last inode in use */
static int checkinode(ino_t inumber, struct inodesc *, int rebuildcg);
void
pass1(void)
{
struct inostat *info;
struct inodesc idesc;
struct bufarea *cgbp;
struct cg *cgp;
ino_t inumber, inosused, mininos;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t i, cgd;
u_int8_t *cp;
int c, rebuildcg;
badblk = dupblk = lastino = 0;
/*
* Set file system reserved blocks in used block map.
*/
for (c = 0; c < sblock.fs_ncg; c++) {
cgd = cgdmin(&sblock, c);
if (c == 0) {
i = cgbase(&sblock, c);
} else
i = cgsblock(&sblock, c);
for (; i < cgd; i++)
setbmap(i);
}
i = sblock.fs_csaddr;
cgd = i + howmany(sblock.fs_cssize, sblock.fs_fsize);
for (; i < cgd; i++)
setbmap(i);
/*
* Find all allocated blocks.
*/
memset(&idesc, 0, sizeof(struct inodesc));
idesc.id_func = pass1check;
n_files = n_blks = 0;
for (c = 0; c < sblock.fs_ncg; c++) {
inumber = c * sblock.fs_ipg;
setinodebuf(inumber);
cgbp = cgget(c);
cgp = cgbp->b_un.b_cg;
rebuildcg = 0;
if (!check_cgmagic(c, cgbp))
rebuildcg = 1;
if (!rebuildcg && sblock.fs_magic == FS_UFS2_MAGIC) {
inosused = cgp->cg_initediblk;
if (inosused > sblock.fs_ipg) {
pfatal(
"Too many initialized inodes (%ju > %d) in cylinder group %d\nReset to %d\n",
(uintmax_t)inosused,
sblock.fs_ipg, c, sblock.fs_ipg);
inosused = sblock.fs_ipg;
}
} else {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inosused = sblock.fs_ipg;
}
if (got_siginfo) {
printf("%s: phase 1: cyl group %d of %d (%d%%)\n",
cdevname, c, sblock.fs_ncg,
c * 100 / sblock.fs_ncg);
got_siginfo = 0;
}
if (got_sigalarm) {
setproctitle("%s p1 %d%%", cdevname,
c * 100 / sblock.fs_ncg);
got_sigalarm = 0;
}
/*
* If we are using soft updates, then we can trust the
* cylinder group inode allocation maps to tell us which
* inodes are allocated. We will scan the used inode map
* to find the inodes that are really in use, and then
* read only those inodes in from disk.
*/
if ((preen || inoopt) && usedsoftdep && !rebuildcg) {
cp = &cg_inosused(cgp)[(inosused - 1) / CHAR_BIT];
for ( ; inosused > 0; inosused -= CHAR_BIT, cp--) {
if (*cp == 0)
continue;
for (i = 1 << (CHAR_BIT - 1); i > 0; i >>= 1) {
if (*cp & i)
break;
inosused--;
}
break;
}
if (inosused < 0)
inosused = 0;
}
/*
* Allocate inoinfo structures for the allocated inodes.
*/
inostathead[c].il_numalloced = inosused;
if (inosused == 0) {
inostathead[c].il_stat = 0;
continue;
}
info = Calloc((unsigned)inosused, sizeof(struct inostat));
if (info == NULL)
errx(EEXIT, "cannot alloc %u bytes for inoinfo",
(unsigned)(sizeof(struct inostat) * inosused));
inostathead[c].il_stat = info;
/*
* Scan the allocated inodes.
*/
for (i = 0; i < inosused; i++, inumber++) {
if (inumber < ROOTINO) {
(void)getnextinode(inumber, rebuildcg);
continue;
}
/*
* NULL return indicates probable end of allocated
* inodes during cylinder group rebuild attempt.
* We always keep trying until we get to the minimum
* valid number for this cylinder group.
*/
if (checkinode(inumber, &idesc, rebuildcg) == 0 &&
i > cgp->cg_initediblk)
break;
}
/*
* This optimization speeds up future runs of fsck
* by trimming down the number of inodes in cylinder
* groups that formerly had many inodes but now have
* fewer in use.
*/
mininos = roundup(inosused + INOPB(&sblock), INOPB(&sblock));
if (inoopt && !preen && !rebuildcg &&
sblock.fs_magic == FS_UFS2_MAGIC &&
cgp->cg_initediblk > 2 * INOPB(&sblock) &&
mininos < cgp->cg_initediblk) {
i = cgp->cg_initediblk;
if (mininos < 2 * INOPB(&sblock))
cgp->cg_initediblk = 2 * INOPB(&sblock);
else
cgp->cg_initediblk = mininos;
pwarn("CYLINDER GROUP %d: RESET FROM %ju TO %d %s\n",
c, i, cgp->cg_initediblk, "VALID INODES");
dirty(cgbp);
}
if (inosused < sblock.fs_ipg)
continue;
lastino += 1;
if (lastino < (c * sblock.fs_ipg))
inosused = 0;
else
inosused = lastino - (c * sblock.fs_ipg);
if (rebuildcg && inosused > cgp->cg_initediblk &&
sblock.fs_magic == FS_UFS2_MAGIC) {
cgp->cg_initediblk = roundup(inosused, INOPB(&sblock));
pwarn("CYLINDER GROUP %d: FOUND %d VALID INODES\n", c,
cgp->cg_initediblk);
}
/*
* If we were not able to determine in advance which inodes
* were in use, then reduce the size of the inoinfo structure
* to the size necessary to describe the inodes that we
* really found.
*/
if (inumber == lastino)
continue;
inostathead[c].il_numalloced = inosused;
if (inosused == 0) {
free(inostathead[c].il_stat);
inostathead[c].il_stat = 0;
continue;
}
info = Calloc((unsigned)inosused, sizeof(struct inostat));
if (info == NULL)
errx(EEXIT, "cannot alloc %u bytes for inoinfo",
(unsigned)(sizeof(struct inostat) * inosused));
memmove(info, inostathead[c].il_stat, inosused * sizeof(*info));
free(inostathead[c].il_stat);
inostathead[c].il_stat = info;
}
freeinodebuf();
}
static int
checkinode(ino_t inumber, struct inodesc *idesc, int rebuildcg)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
off_t kernmaxfilesize;
ufs2_daddr_t ndb;
mode_t mode;
int j, ret, offset;
if ((dp = getnextinode(inumber, rebuildcg)) == NULL)
return (0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
mode = DIP(dp, di_mode) & IFMT;
if (mode == 0) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((sblock.fs_magic == FS_UFS1_MAGIC &&
(memcmp(dp->dp1.di_db, ufs1_zino.di_db,
NDADDR * sizeof(ufs1_daddr_t)) ||
memcmp(dp->dp1.di_ib, ufs1_zino.di_ib,
NIADDR * sizeof(ufs1_daddr_t)) ||
dp->dp1.di_mode || dp->dp1.di_size)) ||
(sblock.fs_magic == FS_UFS2_MAGIC &&
(memcmp(dp->dp2.di_db, ufs2_zino.di_db,
NDADDR * sizeof(ufs2_daddr_t)) ||
memcmp(dp->dp2.di_ib, ufs2_zino.di_ib,
NIADDR * sizeof(ufs2_daddr_t)) ||
dp->dp2.di_mode || dp->dp2.di_size))) {
pfatal("PARTIALLY ALLOCATED INODE I=%lu",
(u_long)inumber);
if (reply("CLEAR") == 1) {
dp = ginode(inumber);
clearinode(dp);
inodirty();
}
}
inoinfo(inumber)->ino_state = USTATE;
return (1);
}
lastino = inumber;
/* This should match the file size limit in ffs_mountfs(). */
if (sblock.fs_magic == FS_UFS1_MAGIC)
kernmaxfilesize = (off_t)0x40000000 * sblock.fs_bsize - 1;
else
kernmaxfilesize = sblock.fs_maxfilesize;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_size) > kernmaxfilesize ||
DIP(dp, di_size) > sblock.fs_maxfilesize ||
(mode == IFDIR && DIP(dp, di_size) > MAXDIRSIZE)) {
if (debug)
printf("bad size %ju:", (uintmax_t)DIP(dp, di_size));
goto unknown;
}
if (!preen && mode == IFMT && reply("HOLD BAD BLOCK") == 1) {
dp = ginode(inumber);
DIP_SET(dp, di_size, sblock.fs_fsize);
DIP_SET(dp, di_mode, IFREG|0600);
inodirty();
}
if ((mode == IFBLK || mode == IFCHR || mode == IFIFO ||
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
mode == IFSOCK) && DIP(dp, di_size) != 0) {
if (debug)
printf("bad special-file size %ju:",
(uintmax_t)DIP(dp, di_size));
goto unknown;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((mode == IFBLK || mode == IFCHR) &&
(dev_t)DIP(dp, di_rdev) == NODEV) {
if (debug)
printf("bad special-file rdev NODEV:");
goto unknown;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ndb = howmany(DIP(dp, di_size), sblock.fs_bsize);
if (ndb < 0) {
if (debug)
printf("bad size %ju ndb %ju:",
(uintmax_t)DIP(dp, di_size), (uintmax_t)ndb);
goto unknown;
}
if (mode == IFBLK || mode == IFCHR)
ndb++;
if (mode == IFLNK) {
/*
* Fake ndb value so direct/indirect block checks below
* will detect any garbage after symlink string.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_size) < (off_t)sblock.fs_maxsymlinklen) {
if (sblock.fs_magic == FS_UFS1_MAGIC)
ndb = howmany(DIP(dp, di_size),
sizeof(ufs1_daddr_t));
else
ndb = howmany(DIP(dp, di_size),
sizeof(ufs2_daddr_t));
if (ndb > NDADDR) {
j = ndb - NDADDR;
for (ndb = 1; j > 1; j--)
ndb *= NINDIR(&sblock);
ndb += NDADDR;
}
}
}
for (j = ndb; ndb < NDADDR && j < NDADDR; j++)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_db[j]) != 0) {
if (debug)
printf("bad direct addr[%d]: %ju\n", j,
(uintmax_t)DIP(dp, di_db[j]));
goto unknown;
}
for (j = 0, ndb -= NDADDR; ndb > 0; j++)
ndb /= NINDIR(&sblock);
for (; j < NIADDR; j++)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_ib[j]) != 0) {
if (debug)
printf("bad indirect addr: %ju\n",
(uintmax_t)DIP(dp, di_ib[j]));
goto unknown;
}
if (ftypeok(dp) == 0)
goto unknown;
n_files++;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inoinfo(inumber)->ino_linkcnt = DIP(dp, di_nlink);
if (mode == IFDIR) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_size) == 0)
inoinfo(inumber)->ino_state = DCLEAR;
else if (DIP(dp, di_nlink) <= 0)
inoinfo(inumber)->ino_state = DZLINK;
else
inoinfo(inumber)->ino_state = DSTATE;
cacheino(dp, inumber);
countdirs++;
} else if (DIP(dp, di_nlink) <= 0)
inoinfo(inumber)->ino_state = FZLINK;
else
inoinfo(inumber)->ino_state = FSTATE;
inoinfo(inumber)->ino_type = IFTODT(mode);
badblk = dupblk = 0;
idesc->id_number = inumber;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_flags) & SF_SNAPSHOT)
idesc->id_type = SNAP;
else
idesc->id_type = ADDR;
(void)ckinode(dp, idesc);
if (sblock.fs_magic == FS_UFS2_MAGIC && dp->dp2.di_extsize > 0) {
idesc->id_type = ADDR;
ndb = howmany(dp->dp2.di_extsize, sblock.fs_bsize);
for (j = 0; j < NXADDR; j++) {
if (--ndb == 0 &&
(offset = blkoff(&sblock, dp->dp2.di_extsize)) != 0)
idesc->id_numfrags = numfrags(&sblock,
fragroundup(&sblock, offset));
else
idesc->id_numfrags = sblock.fs_frag;
if (dp->dp2.di_extb[j] == 0)
continue;
idesc->id_blkno = dp->dp2.di_extb[j];
ret = (*idesc->id_func)(idesc);
if (ret & STOP)
break;
}
}
if (sblock.fs_magic == FS_UFS2_MAGIC)
eascan(idesc, &dp->dp2);
idesc->id_entryno *= btodb(sblock.fs_fsize);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_blocks) != idesc->id_entryno) {
pwarn("INCORRECT BLOCK COUNT I=%lu (%ju should be %ju)",
(u_long)inumber, (uintmax_t)DIP(dp, di_blocks),
(uintmax_t)idesc->id_entryno);
if (preen)
printf(" (CORRECTED)\n");
else if (reply("CORRECT") == 0)
return (1);
if (bkgrdflag == 0) {
dp = ginode(inumber);
DIP_SET(dp, di_blocks, idesc->id_entryno);
inodirty();
} else {
cmd.value = idesc->id_number;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
cmd.size = idesc->id_entryno - DIP(dp, di_blocks);
if (debug)
printf("adjblkcnt ino %ju amount %lld\n",
(uintmax_t)cmd.value, (long long)cmd.size);
if (sysctl(adjblkcnt, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST INODE BLOCK COUNT", cmd.value);
}
}
return (1);
unknown:
pfatal("UNKNOWN FILE TYPE I=%lu", (u_long)inumber);
inoinfo(inumber)->ino_state = FCLEAR;
if (reply("CLEAR") == 1) {
inoinfo(inumber)->ino_state = USTATE;
dp = ginode(inumber);
clearinode(dp);
inodirty();
}
return (1);
}
int
pass1check(struct inodesc *idesc)
{
int res = KEEPON;
int anyout, nfrags;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno = idesc->id_blkno;
struct dups *dlp;
struct dups *new;
if (idesc->id_type == SNAP) {
if (blkno == BLK_NOCOPY)
return (KEEPON);
if (idesc->id_number == cursnapshot) {
if (blkno == blkstofrags(&sblock, idesc->id_lbn))
return (KEEPON);
if (blkno == BLK_SNAP) {
blkno = blkstofrags(&sblock, idesc->id_lbn);
idesc->id_entryno -= idesc->id_numfrags;
}
} else {
if (blkno == BLK_SNAP)
return (KEEPON);
}
}
if ((anyout = chkrange(blkno, idesc->id_numfrags)) != 0) {
blkerror(idesc->id_number, "BAD", blkno);
if (badblk++ >= MAXBAD) {
pwarn("EXCESSIVE BAD BLKS I=%lu",
(u_long)idesc->id_number);
if (preen)
printf(" (SKIPPING)\n");
else if (reply("CONTINUE") == 0) {
ckfini(0);
exit(EEXIT);
}
rerun = 1;
return (STOP);
}
}
for (nfrags = idesc->id_numfrags; nfrags > 0; blkno++, nfrags--) {
if (anyout && chkrange(blkno, 1)) {
res = SKIP;
} else if (!testbmap(blkno)) {
n_blks++;
setbmap(blkno);
} else {
blkerror(idesc->id_number, "DUP", blkno);
if (dupblk++ >= MAXDUP) {
pwarn("EXCESSIVE DUP BLKS I=%lu",
(u_long)idesc->id_number);
if (preen)
printf(" (SKIPPING)\n");
else if (reply("CONTINUE") == 0) {
ckfini(0);
exit(EEXIT);
}
rerun = 1;
return (STOP);
}
new = (struct dups *)Malloc(sizeof(struct dups));
if (new == NULL) {
pfatal("DUP TABLE OVERFLOW.");
if (reply("CONTINUE") == 0) {
ckfini(0);
exit(EEXIT);
}
rerun = 1;
return (STOP);
}
new->dup = blkno;
if (muldup == 0) {
duplist = muldup = new;
new->next = 0;
} else {
new->next = muldup->next;
muldup->next = new;
}
for (dlp = duplist; dlp != muldup; dlp = dlp->next)
if (dlp->dup == blkno)
break;
if (dlp == muldup && dlp->dup != blkno)
muldup = new;
}
/*
* count the number of blocks found in id_entryno
*/
idesc->id_entryno++;
}
return (res);
}