freebsd-nq/share/man/man4/xpt.4

.\"
.\" Copyright (c) 1998 Kenneth D. Merry.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd October 10, 1998
.Dt XPT 4
.Os FreeBSD 3.0
.Sh NAME
.Nm xpt
.Nd CAM transport layer interface
.Sh SYNOPSIS
None.
.Sh DESCRIPTION
The
.Nm xpt
driver provides a way for userland applications to issue certain CAM CCBs
to the kernel. 
.Pp
Since the
.Nm xpt
driver allows direct access to the CAM subsystem, system administrators
should exercise caution when granting access to this driver.  If used
improperly, this driver can allow userland applications to crash a machine
or cause data loss.
.Sh KERNEL CONFIGURATION
There is no kernel configuration required for the
.Nm xpt
driver.  It is enabled when
.Tn SCSI
support is enabled in the kernel.  There is one instance of the xpt driver
per CAM transport layer instance.  Since there is currently only one CAM
transport layer, there will only be one instance of this driver.
.Sh IOCTLS
.Bl -tag -width 01234567890123
.It CAMIOCOMMAND
This ioctl takes certain kinds of CAM CCBs and passes them through to the
CAM transport layer for action.  Only the following CCB types are
supported:
.Pp
.Bl -tag -width XPT_DEV_MATCH -compact
.It XPT_SCAN_BUS
.It XPT_RESET_BUS
.It XPT_SCAN_LUN
.It XPT_ENG_INQ
.It XPT_ENG_EXEC
.It XPT_DEBUG
.It XPT_DEV_MATCH
.It XPT_PATH_INQ
.El
.Pp
The above CCBs are the only ones supported since it makes more sense to
send them through a generic passthrough device rather than a passthrough
device tied to a particular underlying
.Tn SCSI
device.
.It CAMGETPASSTHRU
This ioctl takes an XPT_GDEVLIST CCB, and returns the passthrough device
corresponding to the device in question.
.El
.Sh FILES
.Bl -tag -width 01234567890 -compact
.It Pa /dev/xpt0
Character device node for the
.Nm xpt
driver. 
.El
.Sh DIAGNOSTICS
None.
.Sh SEE ALSO
.Xr cam 3 ,
.Xr cam_cdbparse 3 ,
.Xr pass 4 ,
.Xr camcontrol 8
.Sh HISTORY
The CAM transport layer driver first appeared in
.Fx 3.0 .
.Sh AUTHORS
.An Kenneth Merry Aq ken@FreeBSD.ORG
Add a man page for the transport layer driver.... my last commit blew up in the middle of adding this file... 1998-10-12 00:31:42 +00:00			`.\"`
			`.\" Copyright (c) 1998 Kenneth D. Merry.`
			`.\" All rights reserved.`
			`.\"`
			`.\" Redistribution and use in source and binary forms, with or without`
			`.\" modification, are permitted provided that the following conditions`
			`.\" are met:`
			`.\" 1. Redistributions of source code must retain the above copyright`
			`.\" notice, this list of conditions and the following disclaimer.`
			`.\" 2. Redistributions in binary form must reproduce the above copyright`
			`.\" notice, this list of conditions and the following disclaimer in the`
			`.\" documentation and/or other materials provided with the distribution.`
			`.\" 3. The name of the author may not be used to endorse or promote products`
			`.\" derived from this software without specific prior written permission.`
			`.\"`
			.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
			`.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE`
			`.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE`
			`.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE`
			`.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL`
			`.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS`
			`.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)`
			`.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT`
			`.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY`
			`.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF`
			`.\" SUCH DAMAGE.`
			`.\"`
$Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00			`.\" $FreeBSD$`
Add a man page for the transport layer driver.... my last commit blew up in the middle of adding this file... 1998-10-12 00:31:42 +00:00			`.\"`
			`.Dd October 10, 1998`
			`.Dt XPT 4`
			`.Os FreeBSD 3.0`
			`.Sh NAME`
			`.Nm xpt`
			`.Nd CAM transport layer interface`
			`.Sh SYNOPSIS`
			`None.`
			`.Sh DESCRIPTION`
			`The`
			`.Nm xpt`
			`driver provides a way for userland applications to issue certain CAM CCBs`
			`to the kernel.`
			`.Pp`
			`Since the`
			`.Nm xpt`
			`driver allows direct access to the CAM subsystem, system administrators`
			`should exercise caution when granting access to this driver. If used`
			`improperly, this driver can allow userland applications to crash a machine`
			`or cause data loss.`
			`.Sh KERNEL CONFIGURATION`
			`There is no kernel configuration required for the`
			`.Nm xpt`
			`driver. It is enabled when`
			`.Tn SCSI`
			`support is enabled in the kernel. There is one instance of the xpt driver`
			`per CAM transport layer instance. Since there is currently only one CAM`
			`transport layer, there will only be one instance of this driver.`
			`.Sh IOCTLS`
			`.Bl -tag -width 01234567890123`
			`.It CAMIOCOMMAND`
			`This ioctl takes certain kinds of CAM CCBs and passes them through to the`
			`CAM transport layer for action. Only the following CCB types are`
			`supported:`
			`.Pp`
			`.Bl -tag -width XPT_DEV_MATCH -compact`
			`.It XPT_SCAN_BUS`
			`.It XPT_RESET_BUS`
			`.It XPT_SCAN_LUN`
			`.It XPT_ENG_INQ`
			`.It XPT_ENG_EXEC`
			`.It XPT_DEBUG`
			`.It XPT_DEV_MATCH`
Update to reflect that the XPT device can accept path inquiry commands. Reviewed by: gibbs 2000-10-30 23:33:39 +00:00			`.It XPT_PATH_INQ`
Add a man page for the transport layer driver.... my last commit blew up in the middle of adding this file... 1998-10-12 00:31:42 +00:00			`.El`
			`.Pp`
			`The above CCBs are the only ones supported since it makes more sense to`
			`send them through a generic passthrough device rather than a passthrough`
			`device tied to a particular underlying`
			`.Tn SCSI`
			`device.`
			`.It CAMGETPASSTHRU`
			`This ioctl takes an XPT_GDEVLIST CCB, and returns the passthrough device`
			`corresponding to the device in question.`
			`.El`
			`.Sh FILES`
			`.Bl -tag -width 01234567890 -compact`
			`.It Pa /dev/xpt0`
			`Character device node for the`
			`.Nm xpt`
			`driver.`
			`.El`
			`.Sh DIAGNOSTICS`
			`None.`
			`.Sh SEE ALSO`
			`.Xr cam 3 ,`
Change the worm(4) man page to note that there is no longer a worm(4) driver, and point users in the right direction for similar functionality. The functionality that used to be provided there is now provided by the cd(4) driver and cdrecord. Fix cross-references in a few other man pages. (i.e. delete references to things I haven't written yet) 1998-10-16 00:26:28 +00:00			`.Xr cam_cdbparse 3 ,`
Add a man page for the transport layer driver.... my last commit blew up in the middle of adding this file... 1998-10-12 00:31:42 +00:00			`.Xr pass 4 ,`
Change the worm(4) man page to note that there is no longer a worm(4) driver, and point users in the right direction for similar functionality. The functionality that used to be provided there is now provided by the cd(4) driver and cdrecord. Fix cross-references in a few other man pages. (i.e. delete references to things I haven't written yet) 1998-10-16 00:26:28 +00:00			`.Xr camcontrol 8`
Add a man page for the transport layer driver.... my last commit blew up in the middle of adding this file... 1998-10-12 00:31:42 +00:00			`.Sh HISTORY`
			`The CAM transport layer driver first appeared in`
			`.Fx 3.0 .`
			`.Sh AUTHORS`
			`.An Kenneth Merry Aq ken@FreeBSD.ORG`