freebsd-nq/sbin/savecore/savecore.c

1347 lines
33 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2002 Poul-Henning Kamp
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Poul-Henning Kamp
* and NAI Labs, the Security Research Division of Network Associates, Inc.
* under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
* DARPA CHATS research program.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Copyright (c) 1986, 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/disk.h>
#include <sys/kerneldump.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <capsicum_helpers.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <fstab.h>
#include <paths.h>
2012-04-09 20:55:23 +00:00
#include <signal.h>
#include <stdarg.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syslog.h>
#include <time.h>
#include <unistd.h>
#define Z_SOLO
#include <zlib.h>
#include <zstd.h>
#include <libcasper.h>
#include <casper/cap_fileargs.h>
#include <casper/cap_syslog.h>
#include <libxo/xo.h>
/* The size of the buffer used for I/O. */
#define BUFFERSIZE (1024*1024)
2005-02-26 01:19:21 +00:00
#define STATUS_BAD 0
#define STATUS_GOOD 1
#define STATUS_UNKNOWN 2
static cap_channel_t *capsyslog;
static fileargs_t *capfa;
static bool checkfor, compress, uncompress, clear, force, keep; /* flags */
static int verbose;
static int nfound, nsaved, nerr; /* statistics */
static int maxdumps;
extern FILE *zdopen(int, const char *);
2009-08-25 06:21:45 +00:00
static sig_atomic_t got_siginfo;
static void infohandler(int);
static void
logmsg(int pri, const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
if (capsyslog != NULL)
cap_vsyslog(capsyslog, pri, fmt, ap);
else
vsyslog(pri, fmt, ap);
va_end(ap);
}
static FILE *
xfopenat(int dirfd, const char *path, int flags, const char *modestr, ...)
{
va_list ap;
FILE *fp;
mode_t mode;
int error, fd;
if ((flags & O_CREAT) == O_CREAT) {
va_start(ap, modestr);
mode = (mode_t)va_arg(ap, int);
va_end(ap);
} else
mode = 0;
fd = openat(dirfd, path, flags, mode);
if (fd < 0)
return (NULL);
fp = fdopen(fd, modestr);
if (fp == NULL) {
error = errno;
(void)close(fd);
errno = error;
}
return (fp);
}
static void
printheader(xo_handle_t *xo, const struct kerneldumpheader *h,
const char *device, int bounds, const int status)
{
uint64_t dumplen;
time_t t;
struct tm tm;
char time_str[64];
const char *stat_str;
const char *comp_str;
xo_flush_h(xo);
xo_emit_h(xo, "{Lwc:Dump header from device}{:dump_device/%s}\n",
device);
xo_emit_h(xo, "{P: }{Lwc:Architecture}{:architecture/%s}\n",
h->architecture);
xo_emit_h(xo,
"{P: }{Lwc:Architecture Version}{:architecture_version/%u}\n",
dtoh32(h->architectureversion));
dumplen = dtoh64(h->dumplength);
xo_emit_h(xo, "{P: }{Lwc:Dump Length}{:dump_length_bytes/%lld}\n",
(long long)dumplen);
xo_emit_h(xo, "{P: }{Lwc:Blocksize}{:blocksize/%d}\n",
dtoh32(h->blocksize));
switch (h->compression) {
case KERNELDUMP_COMP_NONE:
comp_str = "none";
break;
case KERNELDUMP_COMP_GZIP:
comp_str = "gzip";
break;
case KERNELDUMP_COMP_ZSTD:
comp_str = "zstd";
break;
default:
comp_str = "???";
break;
}
xo_emit_h(xo, "{P: }{Lwc:Compression}{:compression/%s}\n", comp_str);
t = dtoh64(h->dumptime);
localtime_r(&t, &tm);
if (strftime(time_str, sizeof(time_str), "%F %T %z", &tm) == 0)
time_str[0] = '\0';
xo_emit_h(xo, "{P: }{Lwc:Dumptime}{:dumptime/%s}\n", time_str);
xo_emit_h(xo, "{P: }{Lwc:Hostname}{:hostname/%s}\n", h->hostname);
xo_emit_h(xo, "{P: }{Lwc:Magic}{:magic/%s}\n", h->magic);
xo_emit_h(xo, "{P: }{Lwc:Version String}{:version_string/%s}",
h->versionstring);
xo_emit_h(xo, "{P: }{Lwc:Panic String}{:panic_string/%s}\n",
h->panicstring);
xo_emit_h(xo, "{P: }{Lwc:Dump Parity}{:dump_parity/%u}\n", h->parity);
xo_emit_h(xo, "{P: }{Lwc:Bounds}{:bounds/%d}\n", bounds);
switch (status) {
case STATUS_BAD:
2005-02-26 01:19:21 +00:00
stat_str = "bad";
break;
case STATUS_GOOD:
2005-02-26 01:19:21 +00:00
stat_str = "good";
break;
default:
2005-02-26 01:19:21 +00:00
stat_str = "unknown";
break;
}
xo_emit_h(xo, "{P: }{Lwc:Dump Status}{:dump_status/%s}\n", stat_str);
xo_flush_h(xo);
}
static int
getbounds(int savedirfd)
{
FILE *fp;
char buf[6];
int ret;
/*
* If we are just checking, then we haven't done a chdir to the dump
* directory and we should not try to read a bounds file.
*/
if (checkfor)
return (0);
ret = 0;
if ((fp = xfopenat(savedirfd, "bounds", O_RDONLY, "r")) == NULL) {
if (verbose)
printf("unable to open bounds file, using 0\n");
return (ret);
}
if (fgets(buf, sizeof(buf), fp) == NULL) {
if (feof(fp))
logmsg(LOG_WARNING, "bounds file is empty, using 0");
else
logmsg(LOG_WARNING, "bounds file: %s", strerror(errno));
fclose(fp);
return (ret);
}
errno = 0;
ret = (int)strtol(buf, NULL, 10);
if (ret == 0 && (errno == EINVAL || errno == ERANGE))
logmsg(LOG_WARNING, "invalid value found in bounds, using 0");
fclose(fp);
return (ret);
}
static void
writebounds(int savedirfd, int bounds)
{
FILE *fp;
if ((fp = xfopenat(savedirfd, "bounds", O_WRONLY | O_CREAT | O_TRUNC,
"w", 0644)) == NULL) {
logmsg(LOG_WARNING, "unable to write to bounds file: %m");
return;
}
if (verbose)
printf("bounds number: %d\n", bounds);
fprintf(fp, "%d\n", bounds);
fclose(fp);
}
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
static bool
writekey(int savedirfd, const char *keyname, uint8_t *dumpkey,
uint32_t dumpkeysize)
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
{
int fd;
fd = openat(savedirfd, keyname, O_WRONLY | O_CREAT | O_TRUNC, 0600);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
if (fd == -1) {
logmsg(LOG_ERR, "Unable to open %s to write the key: %m.",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
keyname);
return (false);
}
if (write(fd, dumpkey, dumpkeysize) != (ssize_t)dumpkeysize) {
logmsg(LOG_ERR, "Unable to write the key to %s: %m.", keyname);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
close(fd);
return (false);
}
close(fd);
return (true);
}
static off_t
file_size(int savedirfd, const char *path)
{
struct stat sb;
/* Ignore all errors, this file may not exist. */
if (fstatat(savedirfd, path, &sb, 0) == -1)
return (0);
return (sb.st_size);
}
static off_t
saved_dump_size(int savedirfd, int bounds)
{
static char path[PATH_MAX];
off_t dumpsize;
dumpsize = 0;
(void)snprintf(path, sizeof(path), "info.%d", bounds);
dumpsize += file_size(savedirfd, path);
(void)snprintf(path, sizeof(path), "vmcore.%d", bounds);
dumpsize += file_size(savedirfd, path);
(void)snprintf(path, sizeof(path), "vmcore.%d.gz", bounds);
dumpsize += file_size(savedirfd, path);
(void)snprintf(path, sizeof(path), "vmcore.%d.zst", bounds);
dumpsize += file_size(savedirfd, path);
(void)snprintf(path, sizeof(path), "textdump.tar.%d", bounds);
dumpsize += file_size(savedirfd, path);
(void)snprintf(path, sizeof(path), "textdump.tar.%d.gz", bounds);
dumpsize += file_size(savedirfd, path);
return (dumpsize);
}
static void
saved_dump_remove(int savedirfd, int bounds)
{
static char path[PATH_MAX];
(void)snprintf(path, sizeof(path), "info.%d", bounds);
(void)unlinkat(savedirfd, path, 0);
(void)snprintf(path, sizeof(path), "vmcore.%d", bounds);
(void)unlinkat(savedirfd, path, 0);
(void)snprintf(path, sizeof(path), "vmcore.%d.gz", bounds);
(void)unlinkat(savedirfd, path, 0);
(void)snprintf(path, sizeof(path), "vmcore.%d.zst", bounds);
(void)unlinkat(savedirfd, path, 0);
(void)snprintf(path, sizeof(path), "textdump.tar.%d", bounds);
(void)unlinkat(savedirfd, path, 0);
(void)snprintf(path, sizeof(path), "textdump.tar.%d.gz", bounds);
(void)unlinkat(savedirfd, path, 0);
}
static void
symlinks_remove(int savedirfd)
{
(void)unlinkat(savedirfd, "info.last", 0);
(void)unlinkat(savedirfd, "key.last", 0);
(void)unlinkat(savedirfd, "vmcore.last", 0);
(void)unlinkat(savedirfd, "vmcore.last.gz", 0);
(void)unlinkat(savedirfd, "vmcore.last.zst", 0);
(void)unlinkat(savedirfd, "vmcore_encrypted.last", 0);
(void)unlinkat(savedirfd, "vmcore_encrypted.last.gz", 0);
(void)unlinkat(savedirfd, "textdump.tar.last", 0);
(void)unlinkat(savedirfd, "textdump.tar.last.gz", 0);
}
/*
* Check that sufficient space is available on the disk that holds the
* save directory.
*/
static int
check_space(const char *savedir, int savedirfd, off_t dumpsize, int bounds)
{
char buf[100];
struct statfs fsbuf;
FILE *fp;
off_t available, minfree, spacefree, totfree, needed;
if (fstatfs(savedirfd, &fsbuf) < 0) {
logmsg(LOG_ERR, "%s: %m", savedir);
exit(1);
}
2012-12-14 15:01:23 +00:00
spacefree = ((off_t) fsbuf.f_bavail * fsbuf.f_bsize) / 1024;
totfree = ((off_t) fsbuf.f_bfree * fsbuf.f_bsize) / 1024;
if ((fp = xfopenat(savedirfd, "minfree", O_RDONLY, "r")) == NULL)
minfree = 0;
else {
if (fgets(buf, sizeof(buf), fp) == NULL)
minfree = 0;
else {
char *endp;
errno = 0;
minfree = strtoll(buf, &endp, 10);
if (minfree == 0 && errno != 0)
minfree = -1;
else {
while (*endp != '\0' && isspace(*endp))
endp++;
if (*endp != '\0' || minfree < 0)
minfree = -1;
}
if (minfree < 0)
logmsg(LOG_WARNING,
"`minfree` didn't contain a valid size "
"(`%s`). Defaulting to 0", buf);
}
(void)fclose(fp);
}
available = minfree > 0 ? spacefree - minfree : totfree;
needed = dumpsize / 1024 + 2; /* 2 for info file */
needed -= saved_dump_size(savedirfd, bounds);
if (available < needed) {
logmsg(LOG_WARNING,
"no dump: not enough free space on device (need at least "
"%jdkB for dump; %jdkB available; %jdkB reserved)",
(intmax_t)needed,
(intmax_t)available + minfree,
(intmax_t)minfree);
return (0);
}
if (spacefree - needed < 0)
logmsg(LOG_WARNING,
"dump performed, but free space threshold crossed");
return (1);
}
static bool
compare_magic(const struct kerneldumpheader *kdh, const char *magic)
{
return (strncmp(kdh->magic, magic, sizeof(kdh->magic)) == 0);
}
#define BLOCKSIZE (1<<12)
#define BLOCKMASK (~(BLOCKSIZE-1))
static size_t
sparsefwrite(const char *buf, size_t nr, FILE *fp)
{
size_t nw, he, hs;
for (nw = 0; nw < nr; nw = he) {
/* find a contiguous block of zeroes */
for (hs = nw; hs < nr; hs += BLOCKSIZE) {
for (he = hs; he < nr && buf[he] == 0; ++he)
/* nothing */ ;
/* is the hole long enough to matter? */
if (he >= hs + BLOCKSIZE)
break;
}
/* back down to a block boundary */
he &= BLOCKMASK;
/*
* 1) Don't go beyond the end of the buffer.
* 2) If the end of the buffer is less than
* BLOCKSIZE bytes away, we're at the end
* of the file, so just grab what's left.
*/
if (hs + BLOCKSIZE > nr)
hs = he = nr;
/*
* At this point, we have a partial ordering:
* nw <= hs <= he <= nr
* If hs > nw, buf[nw..hs] contains non-zero
* data. If he > hs, buf[hs..he] is all zeroes.
*/
if (hs > nw)
if (fwrite(buf + nw, hs - nw, 1, fp) != 1)
break;
if (he > hs)
if (fseeko(fp, he - hs, SEEK_CUR) == -1)
break;
}
return (nw);
}
static char *zbuf;
static size_t zbufsize;
static ssize_t
GunzipWrite(z_stream *z, char *in, size_t insize, FILE *fp)
{
static bool firstblock = true; /* XXX not re-entrable/usable */
const size_t hdrlen = 10;
size_t nw = 0, w;
int rv;
z->next_in = in;
z->avail_in = insize;
/*
* Since contrib/zlib for some reason is compiled
* without GUNZIP define, we need to skip the gzip
* header manually. Kernel puts minimal 10 byte
* header, see sys/kern/subr_compressor.c:gz_reset().
*/
if (firstblock) {
z->next_in += hdrlen;
z->avail_in -= hdrlen;
firstblock = false;
}
do {
z->next_out = zbuf;
z->avail_out = zbufsize;
rv = inflate(z, Z_NO_FLUSH);
if (rv != Z_OK && rv != Z_STREAM_END) {
logmsg(LOG_ERR, "decompression failed: %s", z->msg);
return (-1);
}
w = sparsefwrite(zbuf, zbufsize - z->avail_out, fp);
if (w < zbufsize - z->avail_out)
return (-1);
nw += w;
} while (z->avail_in > 0 && rv != Z_STREAM_END);
return (nw);
}
static ssize_t
ZstdWrite(ZSTD_DCtx *Zctx, char *in, size_t insize, FILE *fp)
{
ZSTD_inBuffer Zin;
ZSTD_outBuffer Zout;
size_t nw = 0, w;
int rv;
Zin.src = in;
Zin.size = insize;
Zin.pos = 0;
do {
Zout.dst = zbuf;
Zout.size = zbufsize;
Zout.pos = 0;
rv = ZSTD_decompressStream(Zctx, &Zout, &Zin);
if (ZSTD_isError(rv)) {
logmsg(LOG_ERR, "decompression failed: %s",
ZSTD_getErrorName(rv));
return (-1);
}
w = sparsefwrite(zbuf, Zout.pos, fp);
if (w < Zout.pos)
return (-1);
nw += w;
} while (Zin.pos < Zin.size && rv != 0);
return (nw);
}
static int
DoRegularFile(int fd, off_t dumpsize, u_int sectorsize, bool sparse,
uint8_t compression, char *buf, const char *device,
const char *filename, FILE *fp)
{
size_t nr, wl;
ssize_t nw;
2009-08-25 06:21:45 +00:00
off_t dmpcnt, origsize;
z_stream z; /* gzip */
ZSTD_DCtx *Zctx; /* zstd */
dmpcnt = 0;
2009-08-25 06:21:45 +00:00
origsize = dumpsize;
if (compression == KERNELDUMP_COMP_GZIP) {
memset(&z, 0, sizeof(z));
z.zalloc = Z_NULL;
z.zfree = Z_NULL;
if (inflateInit2(&z, -MAX_WBITS) != Z_OK) {
logmsg(LOG_ERR, "failed to initialize zlib: %s", z.msg);
return (-1);
}
zbufsize = BUFFERSIZE;
} else if (compression == KERNELDUMP_COMP_ZSTD) {
if ((Zctx = ZSTD_createDCtx()) == NULL) {
logmsg(LOG_ERR, "failed to initialize zstd");
return (-1);
}
zbufsize = ZSTD_DStreamOutSize();
}
if (zbufsize > 0)
if ((zbuf = malloc(zbufsize)) == NULL) {
logmsg(LOG_ERR, "failed to alloc decompression buffer");
return (-1);
}
while (dumpsize > 0) {
wl = BUFFERSIZE;
if (wl > (size_t)dumpsize)
wl = dumpsize;
nr = read(fd, buf, roundup(wl, sectorsize));
if (nr != roundup(wl, sectorsize)) {
if (nr == 0)
logmsg(LOG_WARNING,
"WARNING: EOF on dump device");
else
logmsg(LOG_ERR, "read error on %s: %m", device);
nerr++;
return (-1);
}
if (compression == KERNELDUMP_COMP_GZIP)
nw = GunzipWrite(&z, buf, nr, fp);
else if (compression == KERNELDUMP_COMP_ZSTD)
nw = ZstdWrite(Zctx, buf, nr, fp);
else if (!sparse)
nw = fwrite(buf, 1, wl, fp);
else
nw = sparsefwrite(buf, wl, fp);
if (nw < 0 || (compression == KERNELDUMP_COMP_NONE &&
(size_t)nw != wl)) {
logmsg(LOG_ERR,
"write error on %s file: %m", filename);
logmsg(LOG_WARNING,
"WARNING: vmcore may be incomplete");
nerr++;
return (-1);
}
if (verbose) {
dmpcnt += wl;
printf("%llu\r", (unsigned long long)dmpcnt);
fflush(stdout);
}
dumpsize -= wl;
2009-08-25 06:21:45 +00:00
if (got_siginfo) {
printf("%s %.1lf%%\n", filename, (100.0 - (100.0 *
(double)dumpsize / (double)origsize)));
got_siginfo = 0;
}
}
return (0);
}
/*
* Specialized version of dump-reading logic for use with textdumps, which
* are written backwards from the end of the partition, and must be reversed
* before being written to the file. Textdumps are small, so do a bit less
* work to optimize/sparsify.
*/
static int
DoTextdumpFile(int fd, off_t dumpsize, off_t lasthd, char *buf,
const char *device, const char *filename, FILE *fp)
{
int nr, nw, wl;
off_t dmpcnt, totsize;
totsize = dumpsize;
dmpcnt = 0;
wl = 512;
if ((dumpsize % wl) != 0) {
logmsg(LOG_ERR, "textdump uneven multiple of 512 on %s",
device);
nerr++;
return (-1);
}
while (dumpsize > 0) {
nr = pread(fd, buf, wl, lasthd - (totsize - dumpsize) - wl);
if (nr != wl) {
if (nr == 0)
logmsg(LOG_WARNING,
"WARNING: EOF on dump device");
else
logmsg(LOG_ERR, "read error on %s: %m", device);
nerr++;
return (-1);
}
nw = fwrite(buf, 1, wl, fp);
if (nw != wl) {
logmsg(LOG_ERR,
"write error on %s file: %m", filename);
logmsg(LOG_WARNING,
"WARNING: textdump may be incomplete");
nerr++;
return (-1);
}
if (verbose) {
dmpcnt += wl;
printf("%llu\r", (unsigned long long)dmpcnt);
fflush(stdout);
}
dumpsize -= wl;
}
return (0);
}
static void
DoFile(const char *savedir, int savedirfd, const char *device)
{
xo_handle_t *xostdout, *xoinfo;
static char infoname[PATH_MAX], corename[PATH_MAX], linkname[PATH_MAX];
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
static char keyname[PATH_MAX];
static char *buf = NULL;
char *temp = NULL;
struct kerneldumpheader kdhf, kdhl;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
uint8_t *dumpkey;
off_t mediasize, dumpextent, dumplength, firsthd, lasthd;
FILE *core, *info;
int fdcore, fddev, error;
int bounds, status;
u_int sectorsize, xostyle;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
uint32_t dumpkeysize;
bool iscompressed, isencrypted, istextdump, ret;
bounds = getbounds(savedirfd);
dumpkey = NULL;
mediasize = 0;
status = STATUS_UNKNOWN;
xostdout = xo_create_to_file(stdout, XO_STYLE_TEXT, 0);
if (xostdout == NULL) {
logmsg(LOG_ERR, "%s: %m", infoname);
return;
}
if (maxdumps > 0 && bounds == maxdumps)
bounds = 0;
if (buf == NULL) {
buf = malloc(BUFFERSIZE);
if (buf == NULL) {
logmsg(LOG_ERR, "%m");
return;
}
}
if (verbose)
printf("checking for kernel dump on device %s\n", device);
fddev = fileargs_open(capfa, device);
if (fddev < 0) {
logmsg(LOG_ERR, "%s: %m", device);
return;
}
error = ioctl(fddev, DIOCGMEDIASIZE, &mediasize);
if (!error)
error = ioctl(fddev, DIOCGSECTORSIZE, &sectorsize);
if (error) {
logmsg(LOG_ERR,
"couldn't find media and/or sector size of %s: %m", device);
goto closefd;
}
if (verbose) {
printf("mediasize = %lld bytes\n", (long long)mediasize);
printf("sectorsize = %u bytes\n", sectorsize);
}
if (sectorsize < sizeof(kdhl)) {
logmsg(LOG_ERR,
"Sector size is less the kernel dump header %zu",
sizeof(kdhl));
goto closefd;
}
lasthd = mediasize - sectorsize;
temp = malloc(sectorsize);
if (temp == NULL) {
logmsg(LOG_ERR, "%m");
goto closefd;
}
if (lseek(fddev, lasthd, SEEK_SET) != lasthd ||
read(fddev, temp, sectorsize) != (ssize_t)sectorsize) {
logmsg(LOG_ERR,
"error reading last dump header at offset %lld in %s: %m",
(long long)lasthd, device);
goto closefd;
}
memcpy(&kdhl, temp, sizeof(kdhl));
iscompressed = istextdump = false;
if (compare_magic(&kdhl, TEXTDUMPMAGIC)) {
if (verbose)
printf("textdump magic on last dump header on %s\n",
device);
istextdump = true;
if (dtoh32(kdhl.version) != KERNELDUMP_TEXT_VERSION) {
logmsg(LOG_ERR,
"unknown version (%d) in last dump header on %s",
dtoh32(kdhl.version), device);
2012-12-14 15:01:23 +00:00
status = STATUS_BAD;
if (!force)
goto closefd;
}
} else if (compare_magic(&kdhl, KERNELDUMPMAGIC)) {
if (dtoh32(kdhl.version) != KERNELDUMPVERSION) {
logmsg(LOG_ERR,
"unknown version (%d) in last dump header on %s",
dtoh32(kdhl.version), device);
2012-12-14 15:01:23 +00:00
status = STATUS_BAD;
if (!force)
goto closefd;
}
switch (kdhl.compression) {
case KERNELDUMP_COMP_NONE:
uncompress = false;
break;
case KERNELDUMP_COMP_GZIP:
case KERNELDUMP_COMP_ZSTD:
if (compress && verbose)
printf("dump is already compressed\n");
if (uncompress && verbose)
printf("dump to be uncompressed\n");
compress = false;
iscompressed = true;
break;
default:
logmsg(LOG_ERR, "unknown compression type %d on %s",
kdhl.compression, device);
break;
}
} else {
if (verbose)
printf("magic mismatch on last dump header on %s\n",
device);
status = STATUS_BAD;
if (!force)
goto closefd;
if (compare_magic(&kdhl, KERNELDUMPMAGIC_CLEARED)) {
if (verbose)
printf("forcing magic on %s\n", device);
memcpy(kdhl.magic, KERNELDUMPMAGIC, sizeof(kdhl.magic));
} else {
logmsg(LOG_ERR, "unable to force dump - bad magic");
goto closefd;
}
if (dtoh32(kdhl.version) != KERNELDUMPVERSION) {
logmsg(LOG_ERR,
"unknown version (%d) in last dump header on %s",
dtoh32(kdhl.version), device);
2012-12-14 15:01:23 +00:00
status = STATUS_BAD;
if (!force)
goto closefd;
}
}
nfound++;
if (clear)
goto nuke;
if (kerneldump_parity(&kdhl)) {
logmsg(LOG_ERR,
"parity error on last dump header on %s", device);
nerr++;
status = STATUS_BAD;
if (!force)
goto closefd;
}
dumpextent = dtoh64(kdhl.dumpextent);
dumplength = dtoh64(kdhl.dumplength);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
dumpkeysize = dtoh32(kdhl.dumpkeysize);
firsthd = lasthd - dumpextent - sectorsize - dumpkeysize;
if (lseek(fddev, firsthd, SEEK_SET) != firsthd ||
read(fddev, temp, sectorsize) != (ssize_t)sectorsize) {
logmsg(LOG_ERR,
"error reading first dump header at offset %lld in %s: %m",
(long long)firsthd, device);
nerr++;
goto closefd;
}
memcpy(&kdhf, temp, sizeof(kdhf));
if (verbose >= 2) {
printf("First dump headers:\n");
printheader(xostdout, &kdhf, device, bounds, -1);
printf("\nLast dump headers:\n");
printheader(xostdout, &kdhl, device, bounds, -1);
printf("\n");
}
if (memcmp(&kdhl, &kdhf, sizeof(kdhl))) {
logmsg(LOG_ERR,
"first and last dump headers disagree on %s", device);
nerr++;
status = STATUS_BAD;
if (!force)
goto closefd;
} else {
status = STATUS_GOOD;
}
if (checkfor) {
printf("A dump exists on %s\n", device);
close(fddev);
exit(0);
}
if (kdhl.panicstring[0] != '\0')
logmsg(LOG_ALERT, "reboot after panic: %.*s",
(int)sizeof(kdhl.panicstring), kdhl.panicstring);
else
logmsg(LOG_ALERT, "reboot");
if (verbose)
printf("Checking for available free space\n");
if (!check_space(savedir, savedirfd, dumplength, bounds)) {
nerr++;
goto closefd;
}
writebounds(savedirfd, bounds + 1);
saved_dump_remove(savedirfd, bounds);
snprintf(infoname, sizeof(infoname), "info.%d", bounds);
/*
* Create or overwrite any existing dump header files.
*/
if ((info = xfopenat(savedirfd, infoname,
O_WRONLY | O_CREAT | O_TRUNC, "w", 0600)) == NULL) {
logmsg(LOG_ERR, "open(%s): %m", infoname);
nerr++;
goto closefd;
}
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
isencrypted = (dumpkeysize > 0);
if (compress)
snprintf(corename, sizeof(corename), "%s.%d.gz",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
istextdump ? "textdump.tar" :
(isencrypted ? "vmcore_encrypted" : "vmcore"), bounds);
else if (iscompressed && !isencrypted && !uncompress)
snprintf(corename, sizeof(corename), "vmcore.%d.%s", bounds,
(kdhl.compression == KERNELDUMP_COMP_GZIP) ? "gz" : "zst");
else
snprintf(corename, sizeof(corename), "%s.%d",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
istextdump ? "textdump.tar" :
(isencrypted ? "vmcore_encrypted" : "vmcore"), bounds);
fdcore = openat(savedirfd, corename, O_WRONLY | O_CREAT | O_TRUNC,
0600);
if (fdcore < 0) {
logmsg(LOG_ERR, "open(%s): %m", corename);
fclose(info);
nerr++;
goto closefd;
}
if (compress)
core = zdopen(fdcore, "w");
else
core = fdopen(fdcore, "w");
if (core == NULL) {
logmsg(LOG_ERR, "%s: %m", corename);
(void)close(fdcore);
(void)fclose(info);
nerr++;
goto closefd;
}
fdcore = -1;
xostyle = xo_get_style(NULL);
xoinfo = xo_create_to_file(info, xostyle, 0);
if (xoinfo == NULL) {
logmsg(LOG_ERR, "%s: %m", infoname);
fclose(info);
nerr++;
goto closeall;
}
xo_open_container_h(xoinfo, "crashdump");
if (verbose)
printheader(xostdout, &kdhl, device, bounds, status);
printheader(xoinfo, &kdhl, device, bounds, status);
xo_close_container_h(xoinfo, "crashdump");
xo_flush_h(xoinfo);
xo_finish_h(xoinfo);
fclose(info);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
if (isencrypted) {
dumpkey = calloc(1, dumpkeysize);
if (dumpkey == NULL) {
logmsg(LOG_ERR, "Unable to allocate kernel dump key.");
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
nerr++;
goto closeall;
}
if (read(fddev, dumpkey, dumpkeysize) != (ssize_t)dumpkeysize) {
logmsg(LOG_ERR, "Unable to read kernel dump key: %m.");
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
nerr++;
goto closeall;
}
snprintf(keyname, sizeof(keyname), "key.%d", bounds);
ret = writekey(savedirfd, keyname, dumpkey, dumpkeysize);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
explicit_bzero(dumpkey, dumpkeysize);
if (!ret) {
nerr++;
goto closeall;
}
}
logmsg(LOG_NOTICE, "writing %s%score to %s/%s",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
isencrypted ? "encrypted " : "", compress ? "compressed " : "",
savedir, corename);
if (istextdump) {
if (DoTextdumpFile(fddev, dumplength, lasthd, buf, device,
corename, core) < 0)
goto closeall;
} else {
if (DoRegularFile(fddev, dumplength, sectorsize,
!(compress || iscompressed || isencrypted),
uncompress ? kdhl.compression : KERNELDUMP_COMP_NONE,
buf, device, corename, core) < 0) {
goto closeall;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
}
}
if (verbose)
printf("\n");
if (fclose(core) < 0) {
logmsg(LOG_ERR, "error on %s: %m", corename);
nerr++;
goto closefd;
}
symlinks_remove(savedirfd);
if (symlinkat(infoname, savedirfd, "info.last") == -1) {
logmsg(LOG_WARNING, "unable to create symlink %s/%s: %m",
savedir, "info.last");
}
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
if (isencrypted) {
if (symlinkat(keyname, savedirfd, "key.last") == -1) {
logmsg(LOG_WARNING,
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
"unable to create symlink %s/%s: %m", savedir,
"key.last");
}
}
if ((iscompressed && !uncompress) || compress) {
snprintf(linkname, sizeof(linkname), "%s.last.%s",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
istextdump ? "textdump.tar" :
(isencrypted ? "vmcore_encrypted" : "vmcore"),
(kdhl.compression == KERNELDUMP_COMP_ZSTD) ? "zst" : "gz");
} else {
snprintf(linkname, sizeof(linkname), "%s.last",
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
istextdump ? "textdump.tar" :
(isencrypted ? "vmcore_encrypted" : "vmcore"));
}
if (symlinkat(corename, savedirfd, linkname) == -1) {
logmsg(LOG_WARNING, "unable to create symlink %s/%s: %m",
savedir, linkname);
}
nsaved++;
if (verbose)
printf("dump saved\n");
nuke:
if (!keep) {
if (verbose)
printf("clearing dump header\n");
memcpy(kdhl.magic, KERNELDUMPMAGIC_CLEARED, sizeof(kdhl.magic));
memcpy(temp, &kdhl, sizeof(kdhl));
if (lseek(fddev, lasthd, SEEK_SET) != lasthd ||
write(fddev, temp, sectorsize) != (ssize_t)sectorsize)
logmsg(LOG_ERR,
"error while clearing the dump header: %m");
}
xo_close_container_h(xostdout, "crashdump");
xo_finish_h(xostdout);
free(dumpkey);
free(temp);
close(fddev);
return;
closeall:
fclose(core);
closefd:
free(dumpkey);
free(temp);
close(fddev);
}
/* Prepend "/dev/" to any arguments that don't already have it */
static char **
devify(int argc, char **argv)
{
char **devs;
int i, l;
devs = malloc(argc * sizeof(*argv));
if (devs == NULL) {
logmsg(LOG_ERR, "malloc(): %m");
exit(1);
}
for (i = 0; i < argc; i++) {
if (strncmp(argv[i], _PATH_DEV, sizeof(_PATH_DEV) - 1) == 0)
devs[i] = strdup(argv[i]);
else {
char *fullpath;
fullpath = malloc(PATH_MAX);
if (fullpath == NULL) {
logmsg(LOG_ERR, "malloc(): %m");
exit(1);
}
l = snprintf(fullpath, PATH_MAX, "%s%s", _PATH_DEV,
argv[i]);
if (l < 0) {
logmsg(LOG_ERR, "snprintf(): %m");
exit(1);
} else if (l >= PATH_MAX) {
logmsg(LOG_ERR, "device name too long");
exit(1);
}
devs[i] = fullpath;
}
}
return (devs);
}
static char **
enum_dumpdevs(int *argcp)
{
struct fstab *fsp;
char **argv;
int argc, n;
/*
* We cannot use getfsent(3) in capability mode, so we must
* scan /etc/fstab and build up a list of candidate devices
* before proceeding.
*/
argc = 0;
n = 8;
argv = malloc(n * sizeof(*argv));
if (argv == NULL) {
logmsg(LOG_ERR, "malloc(): %m");
exit(1);
}
for (;;) {
fsp = getfsent();
if (fsp == NULL)
break;
if (strcmp(fsp->fs_vfstype, "swap") != 0 &&
strcmp(fsp->fs_vfstype, "dump") != 0)
continue;
if (argc >= n) {
n *= 2;
argv = realloc(argv, n * sizeof(*argv));
if (argv == NULL) {
logmsg(LOG_ERR, "realloc(): %m");
exit(1);
}
}
argv[argc] = strdup(fsp->fs_spec);
if (argv[argc] == NULL) {
logmsg(LOG_ERR, "strdup(): %m");
exit(1);
}
argc++;
}
*argcp = argc;
return (argv);
}
static void
init_caps(int argc, char **argv)
{
cap_rights_t rights;
cap_channel_t *capcas;
capcas = cap_init();
if (capcas == NULL) {
logmsg(LOG_ERR, "cap_init(): %m");
exit(1);
}
/*
* The fileargs capability does not currently provide a way to limit
* ioctls.
*/
(void)cap_rights_init(&rights, CAP_PREAD, CAP_WRITE, CAP_IOCTL);
capfa = fileargs_init(argc, argv, checkfor || keep ? O_RDONLY : O_RDWR,
0, &rights, FA_OPEN);
if (capfa == NULL) {
logmsg(LOG_ERR, "fileargs_init(): %m");
exit(1);
}
caph_cache_catpages();
caph_cache_tzdata();
if (caph_enter_casper() != 0) {
logmsg(LOG_ERR, "caph_enter_casper(): %m");
exit(1);
}
capsyslog = cap_service_open(capcas, "system.syslog");
if (capsyslog == NULL) {
logmsg(LOG_ERR, "cap_service_open(system.syslog): %m");
exit(1);
}
cap_close(capcas);
}
static void
usage(void)
{
xo_error("%s\n%s\n%s\n",
"usage: savecore -c [-v] [device ...]",
" savecore -C [-v] [device ...]",
" savecore [-fkvz] [-m maxdumps] [directory [device ...]]");
exit(1);
}
int
main(int argc, char **argv)
{
cap_rights_t rights;
const char *savedir;
char **devs;
int i, ch, error, savedirfd;
checkfor = compress = clear = force = keep = false;
verbose = 0;
nfound = nsaved = nerr = 0;
savedir = ".";
openlog("savecore", LOG_PERROR, LOG_DAEMON);
2009-08-25 06:21:45 +00:00
signal(SIGINFO, infohandler);
argc = xo_parse_args(argc, argv);
if (argc < 0)
exit(1);
while ((ch = getopt(argc, argv, "Ccfkm:uvz")) != -1)
switch(ch) {
case 'C':
checkfor = true;
break;
case 'c':
clear = true;
break;
case 'f':
force = true;
break;
case 'k':
keep = true;
break;
case 'm':
maxdumps = atoi(optarg);
if (maxdumps <= 0) {
logmsg(LOG_ERR, "Invalid maxdump value");
exit(1);
}
break;
case 'u':
uncompress = true;
break;
case 'v':
verbose++;
break;
case 'z':
compress = true;
break;
case '?':
default:
usage();
}
if (checkfor && (clear || force || keep))
usage();
if (clear && (compress || keep))
usage();
if (maxdumps > 0 && (checkfor || clear))
usage();
if (compress && uncompress)
usage();
argc -= optind;
argv += optind;
if (argc >= 1 && !checkfor && !clear) {
error = chdir(argv[0]);
if (error) {
logmsg(LOG_ERR, "chdir(%s): %m", argv[0]);
exit(1);
}
savedir = argv[0];
argc--;
argv++;
}
if (argc == 0)
devs = enum_dumpdevs(&argc);
else
devs = devify(argc, argv);
savedirfd = open(savedir, O_RDONLY | O_DIRECTORY);
if (savedirfd < 0) {
logmsg(LOG_ERR, "open(%s): %m", savedir);
exit(1);
}
(void)cap_rights_init(&rights, CAP_CREATE, CAP_FCNTL, CAP_FSTATAT,
CAP_FSTATFS, CAP_PREAD, CAP_SYMLINKAT, CAP_FTRUNCATE, CAP_UNLINKAT,
CAP_WRITE);
if (caph_rights_limit(savedirfd, &rights) < 0) {
logmsg(LOG_ERR, "cap_rights_limit(): %m");
exit(1);
}
/* Enter capability mode. */
init_caps(argc, devs);
for (i = 0; i < argc; i++)
DoFile(savedir, savedirfd, devs[i]);
if (nfound == 0) {
if (checkfor) {
if (verbose)
printf("No dump exists\n");
exit(1);
}
if (verbose)
logmsg(LOG_WARNING, "no dumps found");
} else if (nsaved == 0) {
if (nerr != 0) {
if (verbose)
logmsg(LOG_WARNING,
"unsaved dumps found but not saved");
exit(1);
} else if (verbose)
logmsg(LOG_WARNING, "no unsaved dumps found");
} else if (verbose) {
logmsg(LOG_NOTICE, "%d cores saved in %s\n", nsaved, savedir);
}
return (0);
}
2009-08-25 06:21:45 +00:00
static void
infohandler(int sig __unused)
{
got_siginfo = 1;
}