d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
abafa9b9aa
freebsd-nq/sys/alpha/tlsb/dwlpx.c

871 lines
22 KiB
C
Raw Normal View History

Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
/*-
* Copyright (c) 1998 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
*/
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
/*
* Based very closely on NetBSD version-
*
* Copyright (c) 1997 by Matthew Jacob
* NASA AMES Research Center.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#include "opt_simos.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
fix alpha-MD compile errors after the vm_mtx commit
2001-05-20 16:22:46 +00:00
#include <sys/mutex.h>
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#include <sys/bus.h>
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#include <machine/bus.h>
add alpha_pci_route_interrupt method
2001-05-10 06:52:56 +00:00
#include <machine/md_var.h>
- Heavyweight interrupt threads on the alpha for device I/O interrupts. - Make softinterrupts (SWI's) almost completely MI, and divorce them completely from the x86 hardware interrupt code. - The ihandlers array is now gone. Instead, there is a MI shandlers array that just contains SWI handlers. - Most of the former machine/ipl.h files have moved to a new sys/ipl.h. - Stub out all the spl*() functions on all architectures. Submitted by: dfr
2000-10-05 23:09:57 +00:00
#include <sys/proc.h>
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#include <sys/rman.h>
- Heavyweight interrupt threads on the alpha for device I/O interrupts. - Make softinterrupts (SWI's) almost completely MI, and divorce them completely from the x86 hardware interrupt code. - The ihandlers array is now gone. Instead, there is a MI shandlers array that just contains SWI handlers. - Most of the former machine/ipl.h files have moved to a new sys/ipl.h. - Stub out all the spl*() functions on all architectures. Submitted by: dfr
2000-10-05 23:09:57 +00:00
#include <sys/interrupt.h>
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Make SimOS work again.
1998-09-04 08:01:26 +00:00
#include <machine/swiz.h>
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#include <machine/intr.h>
#include <machine/intrcnt.h>
#include <machine/resource.h>
#include <machine/sgmap.h>
#include <vm/vm.h>
#include <vm/vm_page.h>
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#include <alpha/tlsb/tlsbreg.h>
#include <alpha/tlsb/tlsbvar.h>
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#include <alpha/tlsb/kftxxreg.h>
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#include <alpha/tlsb/kftxxvar.h>
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#include <alpha/tlsb/dwlpxreg.h>
#include <alpha/tlsb/dwlpxvar.h>
#include <alpha/pci/pcibus.h>
#include <pci/pcivar.h>
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#include "alphapci_if.h"
#include "pcib_if.h"
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
static devclass_t dwlpx_devclass;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static device_t dwlpxs[DWLPX_NIONODE][DWLPX_NHOSE];
#define KV(pa) ((void *)ALPHA_PHYS_TO_K0SEG(pa))
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
struct dwlpx_softc {
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
struct dwlpx_softc *next;
device_t dev; /* backpointer */
u_int64_t sysbase; /* shorthand */
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
vm_offset_t dmem_base; /* dense memory */
vm_offset_t smem_base; /* sparse memory */
vm_offset_t io_base; /* sparse i/o */
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
struct swiz_space io_space; /* accessor for ports */
struct swiz_space mem_space; /* accessor for memory */
struct rman io_rman; /* resource manager for ports */
struct rman mem_rman; /* resource manager for memory */
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
int bushose; /* our bus && hose */
u_int : 26,
nhpc : 2, /* how many HPCs */
dwlpb : 1, /* this is a DWLPB */
sgmapsz : 3; /* Scatter Gather map size */
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
};
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static driver_intr_t dwlpx_intr;
static u_int32_t imaskcache[DWLPX_NIONODE][DWLPX_NHOSE][NHPC];
static void dwlpx_eintr(unsigned long);
/*
* Direct-mapped window: 2G at 2G
*/
#define DWLPx_DIRECT_MAPPED_BASE (2UL*1024UL*1024UL*1024UL)
#define DWLPx_DIRECT_MAPPED_SIZE (2UL*1024UL*1024UL*1024UL)
#define DWLPx_DIRECT_MAPPED_WMASK PCIA_WMASK_2G
/*
* SGMAP window A: 256M at 1.75G or 1G at 1G
*/
#define DWLPx_SG_MAPPED_SIZE(x) ((x) * PAGE_SIZE)
static void dwlpx_dma_init(struct dwlpx_softc *);
#define DWLPX_SOFTC(dev) (struct dwlpx_softc *) device_get_softc(dev)
static struct dwlpx_softc *dwlpx_root;
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
static int
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
dwlpx_probe(device_t dev)
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
{
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
device_t child;
u_int32_t ctl;
struct dwlpx_softc *xc, *sc = DWLPX_SOFTC(dev);
unsigned long ls;
int io, hose;
io = kft_get_node(dev) - 4;
hose = kft_get_hosenum(dev);
sc->bushose = (io << 2) | hose;
if (dwlpxs[io][hose]) {
add alpha_pci_route_interrupt method
2001-05-10 06:52:56 +00:00
device_printf(dev, "already attached\n");
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
return EEXIST;
}
if ((xc = dwlpx_root) == NULL) {
dwlpx_root = sc;
} else {
while (xc->next)
xc = xc->next;
xc->next = sc;
}
sc->dev = dwlpxs[io][hose] = dev;
ls = DWLPX_BASE(io + 4, hose);
for (sc->nhpc = 1; sc->nhpc < NHPC; sc->nhpc++) {
if (badaddr(KV(PCIA_CTL(sc->nhpc) + ls), sizeof (ctl))) {
break;
}
}
if (sc->nhpc != NHPC) {
REGVAL(PCIA_ERR(0) + ls) = PCIA_ERR_ALLERR;
}
ctl = REGVAL(PCIA_PRESENT + ls);
if ((ctl >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK) {
sc->dwlpb = 1;
device_set_desc(dev, "DWLPB PCI adapter");
} else {
device_set_desc(dev, "DWLPA PCI adapter");
}
sc->sgmapsz = DWLPX_SG32K;
if (device_get_unit(dev) == 0) {
pci_init_resources();
}
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
child = device_add_child(dev, "pci", -1);
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
device_set_ivars(child, &sc->bushose);
return (0);
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
}
static int
Major changes to the generic device framework for FreeBSD/alpha: * Eliminate bus_t and make it possible for all devices to have attached children. * Support dynamically extendable interfaces for drivers to replace both the function pointers in driver_t and bus_ops_t (which has been removed entirely. Two system defined interfaces have been defined, 'device' which is mandatory for all devices and 'bus' which is recommended for all devices which support attached children. * In addition, the alpha port defines two simple interfaces 'clock' for attaching various real time clocks to the system and 'mcclock' for the many different variations of mc146818 clocks which can be attached to different alpha platforms. This eliminates two more function pointer tables in favour of the generic method dispatch system provided by the device framework. Future device interfaces may include: * cdev and bdev interfaces for devfs to use in replacement for specfs and the fixed interfaces bdevsw and cdevsw. * scsi interface to replace struct scsi_adapter (not sure how this works in CAM but I imagine there is something similar there). * various tailored interfaces for different bus types such as pci, isa, pccard etc.
1998-06-14 13:46:10 +00:00
dwlpx_attach(device_t dev)
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
{
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
Update to new interrupt api.
1998-07-12 16:23:19 +00:00
device_t parent = device_get_parent(dev);
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
vm_offset_t regs;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
u_int32_t ctl;
int i, io, hose;
* Add hooks to allow the X server to access I/O ports and memory. * Update drivers to the latest version of the bus interface. The ISA drivers' use of the new resource api is minimal. Garrett has some much cleaner drivers which should be more easily shared between i386 and alpha. This has only been tested on cia based machines. It should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
void *intr;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
io = kft_get_node(dev) - 4;
hose = kft_get_hosenum(dev);
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
sc->sysbase = DWLPX_BASE(io + 4, hose);
regs = (vm_offset_t) KV(sc->sysbase);
sc->dmem_base = regs + DWLPX_PCI_DENSE;
sc->smem_base = regs + DWLPX_PCI_SPARSE;
sc->io_base = regs + DWLPX_PCI_IOSPACE;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
/*
* Maybe initialise busspace_isa_io and busspace_isa_mem
* here. Does the 8200 actually have any ISA slots?
*/
swiz_init_space(&sc->io_space, sc->io_base);
swiz_init_space(&sc->mem_space, sc->smem_base);
sc->io_rman.rm_start = 0;
sc->io_rman.rm_end = ~0u;
sc->io_rman.rm_type = RMAN_ARRAY;
sc->io_rman.rm_descr = "I/O ports";
if (rman_init(&sc->io_rman)
|| rman_manage_region(&sc->io_rman, 0x0, (1L << 32)))
panic("dwlpx_attach: io_rman");
sc->mem_rman.rm_start = 0;
sc->mem_rman.rm_end = ~0u;
sc->mem_rman.rm_type = RMAN_ARRAY;
sc->mem_rman.rm_descr = "I/O memory";
if (rman_init(&sc->mem_rman)
|| rman_manage_region(&sc->mem_rman, 0x0, (1L << 32)))
panic("dwlpx_attach: mem_rman");
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
/*
* Set up interrupt stuff for this DWLPX.
*
* Note that all PCI interrupt pins are disabled at this time.
*
* Do this even for all HPCs- even for the
* nonexistent one on hose zero of a KFTIA.
*/
for (i = 0; i < NHPC; i++) {
REGVAL(PCIA_IMASK(i) + sc->sysbase) = DWLPX_IMASK_DFLT;
REGVAL(PCIA_ERRVEC(i) + sc->sysbase) =
DWLPX_ERRVEC(io, hose);
}
for (i = 0; i < DWLPX_MAXDEV; i++) {
u_int16_t vec;
int ss, hpc;
vec = DWLPX_MVEC(io, hose, i);
ss = i;
if (i < 4) {
hpc = 0;
} else if (i < 8) {
ss -= 4;
hpc = 1;
} else {
ss -= 8;
hpc = 2;
}
REGVAL(PCIA_DEVVEC(hpc, ss, 1) + sc->sysbase) = vec;
REGVAL(PCIA_DEVVEC(hpc, ss, 2) + sc->sysbase) = vec;
REGVAL(PCIA_DEVVEC(hpc, ss, 3) + sc->sysbase) = vec;
REGVAL(PCIA_DEVVEC(hpc, ss, 4) + sc->sysbase) = vec;
}
/*
* Establish HAE values, as well as make sure of sanity elsewhere.
*/
for (i = 0; i < sc->nhpc; i++) {
ctl = REGVAL(PCIA_CTL(i) + sc->sysbase);
ctl &= 0x0fffffff;
ctl &= ~(PCIA_CTL_MHAE(0x1f) | PCIA_CTL_IHAE(0x1f));
/*
* I originally also had it or'ing in 3, which makes no sense.
*/
ctl |= PCIA_CTL_RMMENA | PCIA_CTL_RMMARB;
/*
* Only valid if we're attached to a KFTIA or a KTHA.
*/
ctl |= PCIA_CTL_3UP;
ctl |= PCIA_CTL_CUTENA;
/*
* Fit in appropriate S/G Map Ram size.
*/
if (sc->sgmapsz == DWLPX_SG32K)
ctl |= PCIA_CTL_SG32K;
else if (sc->sgmapsz == DWLPX_SG128K)
ctl |= PCIA_CTL_SG128K;
else
ctl |= PCIA_CTL_SG32K;
REGVAL(PCIA_CTL(i) + sc->sysbase) = ctl;
}
/*
* Enable TBIT if required
*/
if (sc->sgmapsz == DWLPX_SG128K)
REGVAL(PCIA_TBIT + sc->sysbase) = 1;
alpha_mb();
for (io = 0; io < DWLPX_NIONODE; io++) {
for (hose = 0; hose < DWLPX_NHOSE; hose++) {
for (i = 0; i < NHPC; i++) {
imaskcache[io][hose][i] = DWLPX_IMASK_DFLT;
}
}
}
/*
* Set up DMA stuff here.
*/
dwlpx_dma_init(sc);
/*
add alpha_pci_route_interrupt method
2001-05-10 06:52:56 +00:00
* Register our interrupt service requirements with our parent.
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
*/
i = BUS_SETUP_INTR(parent, dev, NULL,
INTR_TYPE_MISC, dwlpx_intr, 0, &intr);
if (i == 0) {
bus_generic_attach(dev);
}
return (i);
}
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static void dwlpx_enadis_intr(int, int, int);
static void
dwlpx_enadis_intr(int vector, int intpin, int onoff)
{
unsigned long paddr;
u_int32_t val;
int device, ionode, hose, hpc, s;
ionode = DWLPX_MVEC_IONODE(vector);
hose = DWLPX_MVEC_HOSE(vector);
device = DWLPX_MVEC_PCISLOT(vector);
paddr = (1LL << 39);
paddr |= (unsigned long) ionode << 36;
paddr |= (unsigned long) hose << 34;
if (device < 4) {
hpc = 0;
} else if (device < 8) {
hpc = 1;
device -= 4;
} else {
hpc = 2;
device -= 8;
}
intpin <<= (device << 2);
val = imaskcache[ionode][hose][hpc];
if (onoff)
val |= intpin;
else
val &= ~intpin;
imaskcache[ionode][hose][hpc] = val;
s = splhigh();
REGVAL(PCIA_IMASK(hpc) + paddr) = val;
alpha_mb();
splx(s);
}
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static int
dwlpx_setup_intr(device_t dev, device_t child, struct resource *irq, int flags,
driver_intr_t *intr, void *arg, void **cookiep)
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
Use the MI ithread helper functions in the alpha hardware interrupt code.
2001-02-09 17:53:23 +00:00
int slot, ionode, hose, error, vector, intpin;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
error = rman_activate_resource(irq);
if (error)
return error;
intpin = pci_get_intpin(child);
slot = pci_get_slot(child);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
ionode = sc->bushose >> 2;
hose = sc->bushose & 0x3;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
vector = DWLPX_MVEC(ionode, hose, slot);
- Heavyweight interrupt threads on the alpha for device I/O interrupts. - Make softinterrupts (SWI's) almost completely MI, and divorce them completely from the x86 hardware interrupt code. - The ihandlers array is now gone. Instead, there is a MI shandlers array that just contains SWI handlers. - Most of the former machine/ipl.h files have moved to a new sys/ipl.h. - Stub out all the spl*() functions on all architectures. Submitted by: dfr
2000-10-05 23:09:57 +00:00
error = alpha_setup_intr(device_get_nameunit(child ? child : dev),
Use the MI ithread helper functions in the alpha hardware interrupt code.
2001-02-09 17:53:23 +00:00
vector, intr, arg, flags, cookiep,
Pass in the new-bus flags to alpha_setup_intr().
2000-11-01 18:40:42 +00:00
&intrcnt[INTRCNT_KN8AE_IRQ], NULL, NULL);
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
if (error)
return error;
dwlpx_enadis_intr(vector, intpin, 1);
device_printf(child, "Node %d Hose %d Slot %d interrupting at TLSB "
"vector 0x%x intpin %d\n", ionode+4, hose, slot, vector, intpin);
return (0);
}
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static int
dwlpx_teardown_intr(device_t dev, device_t child, struct resource *irq, void *c)
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
int slot, ionode, hose, vector, intpin;
intpin = pci_get_intpin(child);
slot = pci_get_slot(child);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
ionode = sc->bushose >> 2;
hose = sc->bushose & 0x3;
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
vector = DWLPX_MVEC(ionode, hose, slot);
dwlpx_enadis_intr(vector, intpin, 0);
alpha_teardown_intr(c);
return rman_deactivate_resource(irq);
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
}
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
static int
dwlpx_read_ivar(device_t dev, device_t child, int which, u_long *result)
{
switch (which) {
case PCIB_IVAR_BUS:
*result = 0;
return 0;
}
return ENOENT;
}
static void *
dwlpx_cvt_dense(device_t dev, vm_offset_t addr)
{
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
addr &= 0xffffffffUL;
return (void *) KV(addr | sc->dmem_base);
}
static kobj_t
dwlpx_get_bustag(device_t dev, int type)
{
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
switch (type) {
case SYS_RES_IOPORT:
return (kobj_t) &sc->io_space;
case SYS_RES_MEMORY:
return (kobj_t) &sc->mem_space;
}
return 0;
}
static struct rman *
dwlpx_get_rman(device_t dev, int type)
{
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
switch (type) {
case SYS_RES_IOPORT:
return &sc->io_rman;
case SYS_RES_MEMORY:
return &sc->mem_rman;
}
return 0;
}
static int
dwlpx_maxslots(device_t dev)
{
return (DWLPX_MAXDEV);
}
static u_int32_t
dwlpx_read_config(device_t dev, int bus, int slot, int func,
int off, int sz)
{
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
u_int32_t *dp, data, rvp, pci_idsel, hpcdev;
unsigned long paddr;
int hose, ionode;
int secondary = 0, s = 0, i;
rvp = data = ~0;
ionode = ((sc->bushose >> 2) & 0x7);
hose = (sc->bushose & 0x3);
if (sc->nhpc < 1)
return (data);
else if (sc->nhpc < 2 && slot >= 4)
return (data);
else if (sc->nhpc < 3 && slot >= 8)
return (data);
else if (slot >= DWLPX_MAXDEV)
return (data);
hpcdev = slot >> 2;
pci_idsel = (1 << ((slot & 0x3) + 2));
paddr = (hpcdev << 22) | (pci_idsel << 16) | (func << 13);
if (secondary) {
paddr &= 0x1fffff;
paddr |= (secondary << 21);
#if 0
printf("read secondary %d reg %x (paddr %lx)",
secondary, offset, tag);
#endif
alpha_pal_draina();
s = splhigh();
/*
* Set up HPCs for type 1 cycles.
*/
for (i = 0; i < sc->nhpc; i++) {
rvp = REGVAL(PCIA_CTL(i)+sc->sysbase) | PCIA_CTL_T1CYC;
alpha_mb();
REGVAL(PCIA_CTL(i) + sc->sysbase) = rvp;
alpha_mb();
}
}
paddr |= ((unsigned long) ((off >> 2) << 7));
paddr |= ((sz - 1) << 3);
paddr |= DWLPX_PCI_CONF;
paddr |= ((unsigned long) hose) << 34;
paddr |= ((unsigned long) ionode) << 36;
paddr |= 1L << 39;
dp = (u_int32_t *)KV(paddr);
#if 0
printf("CFGREAD %d.%d.%d.%d.%d.%d.%d -> paddr 0x%lx",
ionode+4, hose, bus, slot, func, off, sz, paddr);
#endif
if (badaddr(dp, sizeof (*dp)) == 0) {
data = *dp;
}
if (secondary) {
alpha_pal_draina();
for (i = 0; i < sc->nhpc; i++) {
rvp = REGVAL(PCIA_CTL(i)+sc->sysbase) & ~PCIA_CTL_T1CYC;
alpha_mb();
REGVAL(PCIA_CTL(i) + sc->sysbase) = rvp;
alpha_mb();
}
(void) splx(s);
}
if (data != ~0) {
if (sz == 1) {
rvp = SPARSE_BYTE_EXTRACT(off, data);
} else if (sz == 2) {
rvp = SPARSE_WORD_EXTRACT(off, data);
} else {
rvp = data;
}
} else {
rvp = data;
}
#if 0
printf(" data 0x%x -> 0x%x\n", data, rvp);
#endif
return (rvp);
}
static void
dwlpx_write_config(device_t dev, int bus, int slot, int func,
int off, u_int32_t data, int sz)
{
struct dwlpx_softc *sc = DWLPX_SOFTC(dev);
int hose, ionode;
int secondary = 0, s = 0, i;
u_int32_t *dp, rvp, pci_idsel, hpcdev;
unsigned long paddr;
ionode = ((sc->bushose >> 2) & 0x7);
hose = (sc->bushose & 0x3);
if (sc->nhpc < 1)
return;
else if (sc->nhpc < 2 && slot >= 4)
return;
else if (sc->nhpc < 3 && slot >= 8)
return;
else if (slot >= DWLPX_MAXDEV)
return;
hpcdev = slot >> 2;
pci_idsel = (1 << ((slot & 0x3) + 2));
paddr = (hpcdev << 22) | (pci_idsel << 16) | (func << 13);
if (secondary) {
paddr &= 0x1fffff;
paddr |= (secondary << 21);
#if 0
printf("write secondary %d reg %x (paddr %lx)",
secondary, offset, tag);
#endif
alpha_pal_draina();
s = splhigh();
/*
* Set up HPCs for type 1 cycles.
*/
for (i = 0; i < sc->nhpc; i++) {
rvp = REGVAL(PCIA_CTL(i)+sc->sysbase) | PCIA_CTL_T1CYC;
alpha_mb();
REGVAL(PCIA_CTL(i) + sc->sysbase) = rvp;
alpha_mb();
}
}
paddr |= ((unsigned long) ((off >> 2) << 7));
paddr |= ((sz - 1) << 3);
paddr |= DWLPX_PCI_CONF;
paddr |= ((unsigned long) hose) << 34;
paddr |= ((unsigned long) ionode) << 36;
paddr |= 1L << 39;
dp = (u_int32_t *)KV(paddr);
if (badaddr(dp, sizeof (*dp)) == 0) {
u_int32_t new_data;
if (sz == 1) {
new_data = SPARSE_BYTE_INSERT(off, data);
} else if (sz == 2) {
new_data = SPARSE_WORD_INSERT(off, data);
} else {
new_data = data;
}
#if 0
printf("CFGWRITE %d.%d.%d.%d.%d.%d.%d paddr 0x%lx data 0x%x -> 0x%x\n",
ionode+4, hose, bus, slot, func, off, sz, paddr, data, new_data);
#endif
*dp = new_data;
}
if (secondary) {
alpha_pal_draina();
for (i = 0; i < sc->nhpc; i++) {
rvp = REGVAL(PCIA_CTL(i)+sc->sysbase) & ~PCIA_CTL_T1CYC;
alpha_mb();
REGVAL(PCIA_CTL(i) + sc->sysbase) = rvp;
alpha_mb();
}
(void) splx(s);
}
}
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
static void
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
dwlpx_dma_init(struct dwlpx_softc *sc)
{
u_int32_t *tbl, sgwmask, sgwbase, sgwend;
int i, lim;
/*
* Determine size of Window C based on the amount of SGMAP
* page table SRAM available.
*/
if (sc->sgmapsz == DWLPX_SG128K) {
lim = 128 * 1024;
sgwmask = PCIA_WMASK_1G;
sgwbase = 1UL*1024UL*1024UL*1024UL;
} else {
lim = 32 * 1024;
sgwmask = PCIA_WMASK_256M;
sgwbase = 1UL*1024UL*1024UL*1024UL+3UL*256UL*1024UL*1024UL;
}
sgwend = sgwbase + (lim * 8192) - 1;
/*
* A few notes about SGMAP-mapped DMA on the DWLPx:
*
* The DWLPx has PCIA-resident SRAM that is used for
* the SGMAP page table; there is no TLB. The DWLPA
* has room for 32K entries, yielding a total of 256M
* of sgva space. The DWLPB has 32K entries or 128K
* entries, depending on TBIT, yielding either 256M or
* 1G of sgva space.
*/
/*
* Initialize the page table.
*/
tbl = (u_int32_t *) ALPHA_PHYS_TO_K0SEG(PCIA_SGMAP_PT + sc->sysbase);
for (i = 0; i < lim; i++)
tbl[i] = 0;
#if 0
/* XXX NOT DONE YET XXX */
/*
* Initialize the SGMAP for window C:
*
* Size: 256M or 1GB
* Window base: 1GB
* SGVA base: 0
*/
chipset.sgmap = sgmap_map_create(sgwbase, sgwend, dwlpx_sgmap_map, tbl);
#endif
/*
* Set up DMA windows for this DWLPx.
*/
for (i = 0; i < sc->nhpc; i++) {
REGVAL(PCIA_WMASK_A(i) + sc->sysbase) =
DWLPx_DIRECT_MAPPED_WMASK;
REGVAL(PCIA_TBASE_A(i) + sc->sysbase) = 0;
REGVAL(PCIA_WBASE_A(i) + sc->sysbase) =
DWLPx_DIRECT_MAPPED_BASE | PCIA_WBASE_W_EN;
REGVAL(PCIA_WMASK_B(i) + sc->sysbase) = 0;
REGVAL(PCIA_TBASE_B(i) + sc->sysbase) = 0;
REGVAL(PCIA_WBASE_B(i) + sc->sysbase) = 0;
REGVAL(PCIA_WMASK_C(i) + sc->sysbase) = sgwmask;
REGVAL(PCIA_TBASE_C(i) + sc->sysbase) = 0;
REGVAL(PCIA_WBASE_C(i) + sc->sysbase) =
sgwbase | PCIA_WBASE_W_EN | PCIA_WBASE_SG_EN;
}
alpha_mb();
/* XXX XXX BEGIN XXX XXX */
{ /* XXX */
alpha_XXX_dmamap_or = DWLPx_DIRECT_MAPPED_BASE; /* XXX */
} /* XXX */
/* XXX XXX END XXX XXX */
}
/*
*/
static void
dwlpx_intr(void *arg)
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
{
#ifdef SIMOS
extern void simos_intr(int);
simos_intr(0);
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
#else
unsigned long vec = (unsigned long) arg;
if ((vec & DWLPX_VEC_EMARK) != 0) {
dwlpx_eintr(vec);
return;
}
if ((vec & DWLPX_VEC_MARK) == 0) {
panic("dwlpx_intr: bad vector %p", arg);
/* NOTREACHED */
}
alpha_dispatch_intr(NULL, vec);
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
#endif
}
Alpha 8200: Reinsert licence from NetBSD that should have been there to begin with. Redo newbus attachment code so that all the DMA mapping and further pci attachment is done right. Insert config space functions (jeez- how do you do type 1 cycles?). Do the interrupt setups, etc. Basically, this is the core I/O module for 8200s, even though logically it's the 3rd level down from the nominal principle backplane bus (turbolaser). Still to be done here: S/G code isn't done yet, so we better live with 2GB or less primary memory.
2000-03-18 07:54:11 +00:00
static void
dwlpx_eintr(unsigned long vec)
{
device_t dev;
struct dwlpx_softc *sc;
int ionode, hosenum, i;
struct {
u_int32_t err;
u_int32_t addr;
} hpcs[NHPC];
ionode = (vec >> 8) & 0xf;
hosenum = (vec >> 4) & 0x7;
if (ionode >= DWLPX_NIONODE || hosenum >= DWLPX_NHOSE) {
panic("dwlpx_iointr: mangled vector 0x%lx", vec);
/* NOTREACHED */
}
dev = dwlpxs[ionode][hosenum];
sc = DWLPX_SOFTC(dev);
for (i = 0; i < sc->nhpc; i++) {
hpcs[i].err = REGVAL(PCIA_ERR(i) + sc->sysbase);
hpcs[i].addr = REGVAL(PCIA_FADR(i) + sc->sysbase);
}
printf("%s: node %d hose %d error interrupt\n",
device_get_nameunit(dev), ionode + 4, hosenum);
for (i = 0; i < sc->nhpc; i++) {
if ((hpcs[i].err & PCIA_ERR_ERROR) == 0)
continue;
printf("\tHPC %d: ERR=0x%08x; DMA %s Memory, "
"Failing Address 0x%x\n",
i, hpcs[i].err, hpcs[i].addr & 0x1? "write to" :
"read from", hpcs[i].addr & ~3);
if (hpcs[i].err & PCIA_ERR_SERR_L)
printf("\t PCI device asserted SERR_L\n");
if (hpcs[i].err & PCIA_ERR_ILAT)
printf("\t Incremental Latency Exceeded\n");
if (hpcs[i].err & PCIA_ERR_SGPRTY)
printf("\t CPU access of SG RAM Parity Error\n");
if (hpcs[i].err & PCIA_ERR_ILLCSR)
printf("\t Illegal CSR Address Error\n");
if (hpcs[i].err & PCIA_ERR_PCINXM)
printf("\t Nonexistent PCI Address Error\n");
if (hpcs[i].err & PCIA_ERR_DSCERR)
printf("\t PCI Target Disconnect Error\n");
if (hpcs[i].err & PCIA_ERR_ABRT)
printf("\t PCI Target Abort Error\n");
if (hpcs[i].err & PCIA_ERR_WPRTY)
printf("\t PCI Write Parity Error\n");
if (hpcs[i].err & PCIA_ERR_DPERR)
printf("\t PCI Data Parity Error\n");
if (hpcs[i].err & PCIA_ERR_APERR)
printf("\t PCI Address Parity Error\n");
if (hpcs[i].err & PCIA_ERR_DFLT)
printf("\t SG Map RAM Invalid Entry Error\n");
if (hpcs[i].err & PCIA_ERR_DPRTY)
printf("\t DMA access of SG RAM Parity Error\n");
if (hpcs[i].err & PCIA_ERR_DRPERR)
printf("\t DMA Read Return Parity Error\n");
if (hpcs[i].err & PCIA_ERR_MABRT)
printf("\t PCI Master Abort Error\n");
if (hpcs[i].err & PCIA_ERR_CPRTY)
printf("\t CSR Parity Error\n");
if (hpcs[i].err & PCIA_ERR_COVR)
printf("\t CSR Overrun Error\n");
if (hpcs[i].err & PCIA_ERR_MBPERR)
printf("\t Mailbox Parity Error\n");
if (hpcs[i].err & PCIA_ERR_MBILI)
printf("\t Mailbox Illegal Length Error\n");
REGVAL(PCIA_ERR(i) + sc->sysbase) = hpcs[i].err;
}
}
Add initial support for the FreeBSD/alpha kernel. This is very much a work in progress and has never booted a real machine. Initial development and testing was done using SimOS (see http://simos.stanford.edu for details). On the SimOS simulator, this port successfully reaches single-user mode and has been tested with loads as high as one copy of /bin/ls :-). Obtained from: partly from NetBSD/alpha
1998-06-10 10:57:29 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
static device_method_t dwlpx_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, dwlpx_probe),
DEVMETHOD(device_attach, dwlpx_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, dwlpx_read_ivar),
DEVMETHOD(bus_setup_intr, dwlpx_setup_intr),
DEVMETHOD(bus_teardown_intr, dwlpx_teardown_intr),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, pci_release_resource),
DEVMETHOD(bus_activate_resource, pci_activate_resource),
DEVMETHOD(bus_deactivate_resource, pci_deactivate_resource),
/* alphapci interface */
DEVMETHOD(alphapci_cvt_dense, dwlpx_cvt_dense),
DEVMETHOD(alphapci_get_bustag, dwlpx_get_bustag),
DEVMETHOD(alphapci_get_rman, dwlpx_get_rman),
/* pcib interface */
DEVMETHOD(pcib_maxslots, dwlpx_maxslots),
DEVMETHOD(pcib_read_config, dwlpx_read_config),
DEVMETHOD(pcib_write_config, dwlpx_write_config),
add alpha_pci_route_interrupt method
2001-05-10 06:52:56 +00:00
DEVMETHOD(pcib_route_interrupt, alpha_pci_route_interrupt),
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
{ 0, 0 }
};
static driver_t dwlpx_driver = {
"pcib", dwlpx_methods, sizeof (struct dwlpx_softc)
};
DRIVER_MODULE(pcib, kft, dwlpx_driver, dwlpx_devclass, 0, 0);
Reference in New Issue Copy Permalink