freebsd-nq/sys/dev/mk48txx/mk48txx.c

252 lines
7.8 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $NetBSD: mk48txx.c,v 1.7 2001/04/08 17:05:10 tsutsui Exp $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Mostek MK48T02, MK48T08, MK48T59 time-of-day chip subroutines.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/clock.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <dev/mk48txx/mk48txxreg.h>
#include "clock_if.h"
struct mk48txx_softc {
bus_space_tag_t mk_bt; /* bus tag & handle */
bus_space_handle_t mk_bh; /* */
bus_size_t mk_nvramsz; /* Size of NVRAM on the chip */
bus_size_t mk_clkoffset; /* Offset in NVRAM to clock bits */
u_int mk_year0; /* What year is represented on the system
by the chip's year counter at 0 */
};
int mk48txx_auto_century_adjust = 1;
struct {
const char *name;
bus_size_t nvramsz;
bus_size_t clkoff;
int flags;
#define MK48TXX_EXT_REGISTERS 1 /* Has extended register set */
} mk48txx_models[] = {
{ "mk48t02", MK48T02_CLKSZ, MK48T02_CLKOFF, 0 },
{ "mk48t08", MK48T08_CLKSZ, MK48T08_CLKOFF, 0 },
{ "mk48t59", MK48T59_CLKSZ, MK48T59_CLKOFF, MK48TXX_EXT_REGISTERS },
};
int
mk48txx_attach(device_t dev, bus_space_tag_t bt, bus_space_handle_t bh,
const char *model, int year0)
{
struct mk48txx_softc *sc;
bus_size_t clkoff = 0, nvramsz = 0;
int i;
device_printf(dev, "model %s", model);
i = sizeof(mk48txx_models) / sizeof(mk48txx_models[0]);
while (--i >= 0) {
if (strcmp(model, mk48txx_models[i].name) == 0) {
nvramsz = mk48txx_models[i].nvramsz;
clkoff = mk48txx_models[i].clkoff;
break;
}
}
if (i < 0) {
device_printf(dev, " (unsupported)\n");
return (ENXIO);
}
printf("\n");
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
if ((mk48txx_models[i].flags & MK48TXX_EXT_REGISTERS) &&
(bus_space_read_1(bt, bh, clkoff + MK48TXX_FLAGS) &
MK48TXX_FLAGS_BL)) {
device_printf(dev, "mk48txx_attach: battery low\n");
return (ENXIO);
}
sc = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT);
sc->mk_bt = bt;
sc->mk_bh = bh;
sc->mk_nvramsz = nvramsz;
sc->mk_clkoffset = clkoff;
sc->mk_year0 = year0;
device_set_softc(dev, sc);
clock_register(dev, 1000000); /* 1 second resolution. */
return (0);
}
/*
* Get time-of-day and convert to a `struct timespec'
* Return 0 on success; an error number otherwise.
*/
int
mk48txx_gettime(device_t dev, struct timespec *ts)
{
struct mk48txx_softc *mk = device_get_softc(dev);
bus_space_tag_t bt = mk->mk_bt;
bus_space_handle_t bh = mk->mk_bh;
bus_size_t clkoff = mk->mk_clkoffset;
struct clocktime ct;
int year;
u_int8_t csr;
/* enable read (stop time) */
csr = bus_space_read_1(bt, bh, clkoff + MK48TXX_ICSR);
csr |= MK48TXX_CSR_READ;
bus_space_write_1(bt, bh, clkoff + MK48TXX_ICSR, csr);
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
#define FROMREG(reg, mask) \
(bus_space_read_1(bt, bh, clkoff + (reg)) & (mask))
ct.nsec = 0;
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
ct.sec = FROMBCD(FROMREG(MK48TXX_ISEC, MK48TXX_SEC_MASK));
ct.min = FROMBCD(FROMREG(MK48TXX_IMIN, MK48TXX_MIN_MASK));
ct.hour = FROMBCD(FROMREG(MK48TXX_IHOUR, MK48TXX_HOUR_MASK));
ct.day = FROMBCD(FROMREG(MK48TXX_IDAY, MK48TXX_DAY_MASK));
/* Map dow from 1 - 7 to 0 - 6; FROMBCD() isn't necessary here. */
ct.dow = FROMREG(MK48TXX_IWDAY, MK48TXX_WDAY_MASK) - 1;
ct.mon = FROMBCD(FROMREG(MK48TXX_IMON, MK48TXX_MON_MASK));
year = FROMBCD(FROMREG(MK48TXX_IYEAR, MK48TXX_YEAR_MASK));
/*
* XXX: At least the MK48T59 (probably all MK48Txx models with
* extended registers) has a century bit in the MK48TXX_IWDAY
* register which should be used here to make up the century
* when mk48txx_auto_century_adjust (which actually means
* manually adjust the century in the driver) is set to 0.
* Sun/Solaris doesn't use this bit (probably for backwards
* compatibility with Sun hardware equipped with older MK48Txx
* models) and at present this driver is only used on sparc64
* so not respecting the century bit doesn't really matter at
* the moment but generally this should be implemented.
*/
#undef FROMREG
year += mk->mk_year0;
if (year < POSIX_BASE_YEAR && mk48txx_auto_century_adjust != 0)
year += 100;
ct.year = year;
/* time wears on */
csr = bus_space_read_1(bt, bh, clkoff + MK48TXX_ICSR);
csr &= ~MK48TXX_CSR_READ;
bus_space_write_1(bt, bh, clkoff + MK48TXX_ICSR, csr);
return (clock_ct_to_ts(&ct, ts));
}
/*
* Set the time-of-day clock based on the value of the `struct timespec' arg.
* Return 0 on success; an error number otherwise.
*/
int
mk48txx_settime(device_t dev, struct timespec *ts)
{
struct mk48txx_softc *mk = device_get_softc(dev);
bus_space_tag_t bt = mk->mk_bt;
bus_space_handle_t bh = mk->mk_bh;
bus_size_t clkoff = mk->mk_clkoffset;
struct clocktime ct;
u_int8_t csr;
int year;
/* Accuracy is only one second. */
if (ts->tv_nsec >= 500000000)
ts->tv_sec++;
ts->tv_nsec = 0;
clock_ts_to_ct(ts, &ct);
year = ct.year - mk->mk_year0;
if (year > 99 && mk48txx_auto_century_adjust != 0)
year -= 100;
/* enable write */
csr = bus_space_read_1(bt, bh, clkoff + MK48TXX_ICSR);
csr |= MK48TXX_CSR_WRITE;
bus_space_write_1(bt, bh, clkoff + MK48TXX_ICSR, csr);
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
#define TOREG(reg, mask, val) \
(bus_space_write_1(bt, bh, clkoff + (reg), \
(bus_space_read_1(bt, bh, clkoff + (reg)) & ~(mask)) | \
((val) & (mask))))
TOREG(MK48TXX_ISEC, MK48TXX_SEC_MASK, TOBCD(ct.sec));
TOREG(MK48TXX_IMIN, MK48TXX_MIN_MASK, TOBCD(ct.min));
TOREG(MK48TXX_IHOUR, MK48TXX_HOUR_MASK, TOBCD(ct.hour));
/* Map dow from 0 - 6 to 1 - 7; TOBCD() isn't necessary here. */
TOREG(MK48TXX_IWDAY, MK48TXX_WDAY_MASK, ct.dow + 1);
TOREG(MK48TXX_IDAY, MK48TXX_DAY_MASK, TOBCD(ct.day));
TOREG(MK48TXX_IMON, MK48TXX_MON_MASK, TOBCD(ct.mon));
TOREG(MK48TXX_IYEAR, MK48TXX_YEAR_MASK, TOBCD(year));
/*
* XXX: Use the century bit for storing the century when
* mk48txx_auto_century_adjust is set to 0.
*/
#undef TOREG
/* load them up */
csr = bus_space_read_1(bt, bh, clkoff + MK48TXX_ICSR);
csr &= ~MK48TXX_CSR_WRITE;
bus_space_write_1(bt, bh, clkoff + MK48TXX_ICSR, csr);
return (0);
}
int
mk48txx_get_nvram_size(device_t dev, bus_size_t *vp)
{
struct mk48txx_softc *mk;
mk = device_get_softc(dev);
*vp = mk->mk_nvramsz;
return (0);
}