freebsd-nq/sbin/fsck_ffs/pass5.c

533 lines
15 KiB
C
Raw Normal View History

/*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)pass5.c 8.9 (Berkeley) 4/28/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/sysctl.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <err.h>
#include <inttypes.h>
#include <limits.h>
#include <string.h>
#include "fsck.h"
static void check_maps(u_char *, u_char *, int, int, const char *, int *, int, int);
void
pass5(void)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int c, i, j, blk, frags, basesize, mapsize;
int inomapsize, blkmapsize;
struct fs *fs = &sblock;
struct cg *cg = &cgrp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t d, dbase, dmax;
int excessdirs, rewritecg = 0;
struct csum *cs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct csum_total cstotal;
struct inodesc idesc[3];
char buf[MAXBSIZE];
struct cg *newcg = (struct cg *)buf;
inoinfo(WINO)->ino_state = USTATE;
memset(newcg, 0, (size_t)fs->fs_cgsize);
newcg->cg_niblk = fs->fs_ipg;
if (cvtlevel >= 3) {
if (fs->fs_maxcontig < 2 && fs->fs_contigsumsize > 0) {
if (preen)
pwarn("DELETING CLUSTERING MAPS\n");
if (preen || reply("DELETE CLUSTERING MAPS")) {
fs->fs_contigsumsize = 0;
rewritecg = 1;
sbdirty();
}
}
if (fs->fs_maxcontig > 1) {
const char *doit = 0;
if (fs->fs_contigsumsize < 1) {
doit = "CREAT";
} else if (fs->fs_contigsumsize < fs->fs_maxcontig &&
fs->fs_contigsumsize < FS_MAXCONTIG) {
doit = "EXPAND";
}
if (doit) {
i = fs->fs_contigsumsize;
fs->fs_contigsumsize =
MIN(fs->fs_maxcontig, FS_MAXCONTIG);
if (CGSIZE(fs) > (u_int)fs->fs_bsize) {
pwarn("CANNOT %s CLUSTER MAPS\n", doit);
fs->fs_contigsumsize = i;
} else if (preen ||
reply("CREATE CLUSTER MAPS")) {
if (preen)
pwarn("%sING CLUSTER MAPS\n",
doit);
fs->fs_cgsize =
fragroundup(fs, CGSIZE(fs));
rewritecg = 1;
sbdirty();
}
}
}
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
basesize = &newcg->cg_space[0] - (u_char *)(&newcg->cg_firstfield);
if (sblock.fs_magic == FS_UFS2_MAGIC) {
newcg->cg_iusedoff = basesize;
} else {
/*
* We reserve the space for the old rotation summary
* tables for the benefit of old kernels, but do not
* maintain them in modern kernels. In time, they can
* go away.
*/
newcg->cg_old_btotoff = basesize;
newcg->cg_old_boff = newcg->cg_old_btotoff +
fs->fs_old_cpg * sizeof(int32_t);
newcg->cg_iusedoff = newcg->cg_old_boff +
fs->fs_old_cpg * fs->fs_old_nrpos * sizeof(u_int16_t);
memset(&newcg->cg_space[0], 0, newcg->cg_iusedoff - basesize);
}
inomapsize = howmany(fs->fs_ipg, CHAR_BIT);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_freeoff = newcg->cg_iusedoff + inomapsize;
blkmapsize = howmany(fs->fs_fpg, CHAR_BIT);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_nextfreeoff = newcg->cg_freeoff + blkmapsize;
if (fs->fs_contigsumsize > 0) {
newcg->cg_clustersumoff = newcg->cg_nextfreeoff -
sizeof(u_int32_t);
newcg->cg_clustersumoff =
roundup(newcg->cg_clustersumoff, sizeof(u_int32_t));
newcg->cg_clusteroff = newcg->cg_clustersumoff +
(fs->fs_contigsumsize + 1) * sizeof(u_int32_t);
newcg->cg_nextfreeoff = newcg->cg_clusteroff +
howmany(fragstoblks(fs, fs->fs_fpg), CHAR_BIT);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_magic = CG_MAGIC;
mapsize = newcg->cg_nextfreeoff - newcg->cg_iusedoff;
memset(&idesc[0], 0, sizeof idesc);
for (i = 0; i < 3; i++)
idesc[i].id_type = ADDR;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memset(&cstotal, 0, sizeof(struct csum_total));
dmax = blknum(fs, fs->fs_size + fs->fs_frag - 1);
for (d = fs->fs_size; d < dmax; d++)
setbmap(d);
for (c = 0; c < fs->fs_ncg; c++) {
if (got_siginfo) {
printf("%s: phase 5: cyl group %d of %d (%d%%)\n",
cdevname, c, sblock.fs_ncg,
c * 100 / sblock.fs_ncg);
got_siginfo = 0;
}
if (got_sigalarm) {
setproctitle("%s p5 %d%%", cdevname,
c * 100 / sblock.fs_ncg);
got_sigalarm = 0;
}
getblk(&cgblk, cgtod(fs, c), fs->fs_cgsize);
if (!cg_chkmagic(cg))
pfatal("CG %d: BAD MAGIC NUMBER\n", c);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
newcg->cg_time = cg->cg_time;
newcg->cg_old_time = cg->cg_old_time;
newcg->cg_cgx = c;
dbase = cgbase(fs, c);
dmax = dbase + fs->fs_fpg;
if (dmax > fs->fs_size)
dmax = fs->fs_size;
newcg->cg_ndblk = dmax - dbase;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC) {
if (c == fs->fs_ncg - 1)
newcg->cg_old_ncyl = howmany(newcg->cg_ndblk,
fs->fs_fpg / fs->fs_old_cpg);
else
newcg->cg_old_ncyl = fs->fs_old_cpg;
newcg->cg_old_niblk = fs->fs_ipg;
newcg->cg_niblk = 0;
}
if (fs->fs_contigsumsize > 0)
newcg->cg_nclusterblks = newcg->cg_ndblk / fs->fs_frag;
newcg->cg_cs.cs_ndir = 0;
newcg->cg_cs.cs_nffree = 0;
newcg->cg_cs.cs_nbfree = 0;
newcg->cg_cs.cs_nifree = fs->fs_ipg;
if (cg->cg_rotor >= 0 && cg->cg_rotor < newcg->cg_ndblk)
newcg->cg_rotor = cg->cg_rotor;
else
newcg->cg_rotor = 0;
if (cg->cg_frotor >= 0 && cg->cg_frotor < newcg->cg_ndblk)
newcg->cg_frotor = cg->cg_frotor;
else
newcg->cg_frotor = 0;
if (cg->cg_irotor >= 0 && cg->cg_irotor < fs->fs_ipg)
newcg->cg_irotor = cg->cg_irotor;
else
newcg->cg_irotor = 0;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_magic == FS_UFS1_MAGIC) {
newcg->cg_initediblk = 0;
} else {
if ((unsigned)cg->cg_initediblk > fs->fs_ipg)
newcg->cg_initediblk = fs->fs_ipg;
else
newcg->cg_initediblk = cg->cg_initediblk;
}
memset(&newcg->cg_frsum[0], 0, sizeof newcg->cg_frsum);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memset(cg_inosused(newcg), 0, (size_t)(mapsize));
j = fs->fs_ipg * c;
for (i = 0; i < inostathead[c].il_numalloced; j++, i++) {
switch (inoinfo(j)->ino_state) {
case USTATE:
break;
case DSTATE:
case DCLEAR:
case DFOUND:
case DZLINK:
newcg->cg_cs.cs_ndir++;
/* FALLTHROUGH */
case FSTATE:
case FCLEAR:
case FZLINK:
newcg->cg_cs.cs_nifree--;
setbit(cg_inosused(newcg), i);
break;
default:
if (j < (int)ROOTINO)
break;
errx(EEXIT, "BAD STATE %d FOR INODE I=%d",
inoinfo(j)->ino_state, j);
}
}
if (c == 0)
for (i = 0; i < (int)ROOTINO; i++) {
setbit(cg_inosused(newcg), i);
newcg->cg_cs.cs_nifree--;
}
for (i = 0, d = dbase;
d < dmax;
d += fs->fs_frag, i += fs->fs_frag) {
frags = 0;
for (j = 0; j < fs->fs_frag; j++) {
if (testbmap(d + j))
continue;
setbit(cg_blksfree(newcg), i + j);
frags++;
}
if (frags == fs->fs_frag) {
newcg->cg_cs.cs_nbfree++;
if (fs->fs_contigsumsize > 0)
setbit(cg_clustersfree(newcg),
i / fs->fs_frag);
} else if (frags > 0) {
newcg->cg_cs.cs_nffree += frags;
blk = blkmap(fs, cg_blksfree(newcg), i);
ffs_fragacct(fs, blk, newcg->cg_frsum, 1);
}
}
if (fs->fs_contigsumsize > 0) {
int32_t *sump = cg_clustersum(newcg);
u_char *mapp = cg_clustersfree(newcg);
int map = *mapp++;
int bit = 1;
int run = 0;
for (i = 0; i < newcg->cg_nclusterblks; i++) {
if ((map & bit) != 0) {
run++;
} else if (run != 0) {
if (run > fs->fs_contigsumsize)
run = fs->fs_contigsumsize;
sump[run]++;
run = 0;
}
if ((i & (CHAR_BIT - 1)) != (CHAR_BIT - 1)) {
bit <<= 1;
} else {
map = *mapp++;
bit = 1;
}
}
if (run != 0) {
if (run > fs->fs_contigsumsize)
run = fs->fs_contigsumsize;
sump[run]++;
}
}
cstotal.cs_nffree += newcg->cg_cs.cs_nffree;
cstotal.cs_nbfree += newcg->cg_cs.cs_nbfree;
cstotal.cs_nifree += newcg->cg_cs.cs_nifree;
cstotal.cs_ndir += newcg->cg_cs.cs_ndir;
cs = &fs->fs_cs(fs, c);
if (cursnapshot == 0 &&
memcmp(&newcg->cg_cs, cs, sizeof *cs) != 0 &&
dofix(&idesc[0], "FREE BLK COUNT(S) WRONG IN SUPERBLK")) {
memmove(cs, &newcg->cg_cs, sizeof *cs);
sbdirty();
}
if (rewritecg) {
memmove(cg, newcg, (size_t)fs->fs_cgsize);
cgdirty();
continue;
}
if (cursnapshot == 0 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memcmp(newcg, cg, basesize) != 0 &&
dofix(&idesc[2], "SUMMARY INFORMATION BAD")) {
memmove(cg, newcg, (size_t)basesize);
cgdirty();
}
if (bkgrdflag != 0 || usedsoftdep || debug) {
excessdirs = cg->cg_cs.cs_ndir - newcg->cg_cs.cs_ndir;
if (excessdirs < 0) {
pfatal("LOST %d DIRECTORIES\n", -excessdirs);
excessdirs = 0;
}
if (excessdirs > 0)
check_maps(cg_inosused(newcg), cg_inosused(cg),
inomapsize, cg->cg_cgx * fs->fs_ipg, "DIR",
freedirs, 0, excessdirs);
check_maps(cg_inosused(newcg), cg_inosused(cg),
inomapsize, cg->cg_cgx * fs->fs_ipg, "FILE",
freefiles, excessdirs, fs->fs_ipg);
check_maps(cg_blksfree(cg), cg_blksfree(newcg),
blkmapsize, cg->cg_cgx * fs->fs_fpg, "FRAG",
freeblks, 0, fs->fs_fpg);
}
if (cursnapshot == 0 &&
memcmp(cg_inosused(newcg), cg_inosused(cg), mapsize) != 0 &&
dofix(&idesc[1], "BLK(S) MISSING IN BIT MAPS")) {
memmove(cg_inosused(cg), cg_inosused(newcg),
(size_t)mapsize);
cgdirty();
}
}
if (cursnapshot == 0 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
memcmp(&cstotal, &fs->fs_cstotal, sizeof cstotal) != 0
&& dofix(&idesc[0], "SUMMARY BLK COUNT(S) WRONG IN SUPERBLK")) {
memmove(&fs->fs_cstotal, &cstotal, sizeof cstotal);
fs->fs_ronly = 0;
fs->fs_fmod = 0;
sbdirty();
}
/*
* When doing background fsck on a snapshot, figure out whether
* the superblock summary is inaccurate and correct it when
* necessary.
*/
if (cursnapshot != 0) {
cmd.size = 1;
cmd.value = cstotal.cs_ndir - fs->fs_cstotal.cs_ndir;
if (cmd.value != 0) {
if (debug)
printf("adjndir by %+" PRIi64 "\n", cmd.value);
if (sysctl(adjndir, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF DIRECTORIES", cmd.value);
}
cmd.value = cstotal.cs_nbfree - fs->fs_cstotal.cs_nbfree;
if (cmd.value != 0) {
if (debug)
printf("adjnbfree by %+" PRIi64 "\n", cmd.value);
if (sysctl(adjnbfree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE BLOCKS", cmd.value);
}
cmd.value = cstotal.cs_nifree - fs->fs_cstotal.cs_nifree;
if (cmd.value != 0) {
if (debug)
printf("adjnifree by %+" PRIi64 "\n", cmd.value);
if (sysctl(adjnifree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE INODES", cmd.value);
}
cmd.value = cstotal.cs_nffree - fs->fs_cstotal.cs_nffree;
if (cmd.value != 0) {
if (debug)
printf("adjnffree by %+" PRIi64 "\n", cmd.value);
if (sysctl(adjnffree, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE FRAGS", cmd.value);
}
cmd.value = cstotal.cs_numclusters - fs->fs_cstotal.cs_numclusters;
if (cmd.value != 0) {
if (debug)
printf("adjnumclusters by %+" PRIi64 "\n", cmd.value);
if (sysctl(adjnumclusters, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST NUMBER OF FREE CLUSTERS", cmd.value);
}
}
}
static void
check_maps(
u_char *map1, /* map of claimed allocations */
u_char *map2, /* map of determined allocations */
int mapsize, /* size of above two maps */
int startvalue, /* resource value for first element in map */
const char *name, /* name of resource found in maps */
int *opcode, /* sysctl opcode to free resource */
int skip, /* number of entries to skip before starting to free */
int limit) /* limit on number of entries to free */
{
# define BUFSIZE 16
char buf[BUFSIZE];
long i, j, k, l, m, n, size;
int astart, aend, ustart, uend;
void (*msg)(const char *fmt, ...);
if (bkgrdflag)
msg = pfatal;
else
msg = pwarn;
astart = ustart = aend = uend = -1;
for (i = 0; i < mapsize; i++) {
j = *map1++;
k = *map2++;
if (j == k)
continue;
for (m = 0, l = 1; m < CHAR_BIT; m++, l <<= 1) {
if ((j & l) == (k & l))
continue;
n = startvalue + i * CHAR_BIT + m;
if ((j & l) != 0) {
if (astart == -1) {
astart = aend = n;
continue;
}
if (aend + 1 == n) {
aend = n;
continue;
}
if (astart == aend)
(*msg)("ALLOCATED %s %d MARKED FREE\n",
name, astart);
else
(*msg)("%s %sS %d-%d MARKED FREE\n",
"ALLOCATED", name, astart, aend);
astart = aend = n;
} else {
if (ustart == -1) {
ustart = uend = n;
continue;
}
if (uend + 1 == n) {
uend = n;
continue;
}
size = uend - ustart + 1;
if (size <= skip) {
skip -= size;
ustart = uend = n;
continue;
}
if (skip > 0) {
ustart += skip;
size -= skip;
skip = 0;
}
if (size > limit)
size = limit;
if (debug && size == 1)
pwarn("%s %s %d MARKED USED\n",
"UNALLOCATED", name, ustart);
else if (debug)
pwarn("%s %sS %d-%ld MARKED USED\n",
"UNALLOCATED", name, ustart,
ustart + size - 1);
if (bkgrdflag != 0) {
cmd.value = ustart;
cmd.size = size;
if (sysctl(opcode, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1) {
snprintf(buf, BUFSIZE,
"FREE %s", name);
rwerror(buf, cmd.value);
}
}
limit -= size;
if (limit <= 0)
return;
ustart = uend = n;
}
}
}
if (astart != -1) {
if (astart == aend)
(*msg)("ALLOCATED %s %d MARKED FREE\n", name, astart);
else
(*msg)("ALLOCATED %sS %d-%d MARKED FREE\n",
name, astart, aend);
}
if (ustart != -1) {
size = uend - ustart + 1;
if (size <= skip)
return;
if (skip > 0) {
ustart += skip;
size -= skip;
}
if (size > limit)
size = limit;
if (debug) {
if (size == 1)
pwarn("UNALLOCATED %s %d MARKED USED\n",
name, ustart);
else
pwarn("UNALLOCATED %sS %d-%ld MARKED USED\n",
name, ustart, ustart + size - 1);
}
if (bkgrdflag != 0) {
cmd.value = ustart;
cmd.size = size;
if (sysctl(opcode, MIBSIZE, 0, 0, &cmd,
sizeof cmd) == -1) {
snprintf(buf, BUFSIZE, "FREE %s", name);
rwerror(buf, cmd.value);
}
}
}
}