freebsd-nq/tests/sys/Makefile

# $FreeBSD$

.include <bsd.own.mk>

TESTSDIR= ${TESTSBASE}/sys

TESTS_SUBDIRS+=		acl
TESTS_SUBDIRS+=		aio
TESTS_SUBDIRS+=		fifo
TESTS_SUBDIRS+=		file
TESTS_SUBDIRS+=		kern
TESTS_SUBDIRS+=		kqueue
TESTS_SUBDIRS+=		mqueue
TESTS_SUBDIRS+=		netinet
TESTS_SUBDIRS+=		opencrypto
TESTS_SUBDIRS+=		posixshm
TESTS_SUBDIRS+=		vfs
TESTS_SUBDIRS+=		vm

# Items not integrated into kyua runs by default
SUBDIR+=		pjdfstest

SUBDIR_PARALLEL=

.include <bsd.test.mk>
Replace the old unix_seqpacket and unix_seqpacket_exercise tests, which were a little broken and not automatable, with unix_seqpacket_test. It's coverage is a superset of the old tests and it uses ATF. It includes test cases for bugs kern/185813 and kern/185812. PR: kern/185812 PR: kern/185813 Sponsored by: Spectra Logic MFC after: 2 weeks 2014-01-23 17:26:28 +00:00			`# $FreeBSD$`

			`.include <bsd.own.mk>`

Integrate pjdfstest test suite execution into kyua pjdfstest execution is opt-in and must be done as root due to some of the assumptions made by the test suite and lack of error checking in the non-root case A description of how to execute pjdfstest with kyua is provided in share/pjdfstest/README Phabric: D824 (an earlier prototype patch) MFC after: 1 month Relnotes: yes Sponsored by: EMC / Isilon Storage Division 2014-11-03 07:18:42 +00:00			`TESTSDIR= ${TESTSBASE}/sys`

Integrate tools/regression/acltools into the FreeBSD test suite as tests/sys/acl - Make the requirements more complete for the testcases - Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1) is available, ACL support is enabled with UFS, etc). - Work with temporary files/directories/mountpoints that work with atf/kyua - Limit the testcases to work on temporary filesystems to reduce tainting the test host MFC after: 2 weeks Reviewed by: trasz (earlier version) Differential Revision: https://reviews.freebsd.org/D3810 2015-10-17 08:39:37 +00:00			`TESTS_SUBDIRS+= acl`
Integrate tools/regression/aio/aiotest and tools/regression/aio/kqueue into the FreeBSD test suite as tests/sys/aio MFC after: 1 week 2015-04-27 08:51:40 +00:00			`TESTS_SUBDIRS+= aio`
Integrate tools/regression/fifo into the FreeBSD test suite as tests/sys/fifo and tools/regression/file into the FreeBSD test suite as tests/sys/file MFC after: 1 week 2015-04-27 08:15:17 +00:00			`TESTS_SUBDIRS+= fifo`
			`TESTS_SUBDIRS+= file`
tests/sys/Makefile use TESTS_SUBDIRS for kern instead of SUBDIRS. I don't think it makes a difference in this case, but TESTS_SUBDIRS is generally correct for subdirectories that contain tests. Sponsored by: Spectra Logic MFC after: 5 days X-MFC-With: r261133 2014-02-08 00:20:21 +00:00			`TESTS_SUBDIRS+= kern`
Integrate tools/regression/kqueue into the FreeBSD test suite as tests/sys/kqueue MFC after: 1 week 2015-04-27 07:37:48 +00:00			`TESTS_SUBDIRS+= kqueue`
Integrate tools/regression/mqueue into the FreeBSD test suite as tests/sys/mqueue MFC after: 1 week 2015-04-27 08:31:43 +00:00			`TESTS_SUBDIRS+= mqueue`
Add several ATF tests that deal with multiple fibs. They're described in several different PRs, but the tests share some common code, so I'm committing them together. sbin/ifconfig/tests sbin/ifconfig/tests/fibs_test.sh sbin/ifconfig/tests/Makefile sbin/ifconfig/Makefile Add fibs_test.sh, which regresses bin/187551 tests/sys/netinet tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile tests/sys/Makefile Add fibs_test.sh, which regresses kern/167947, kern/187552 kern/187549, kern/187550, and kern/187553 etc/mtree/BSD.tests.dist Add newly created directories PR: bin/187551 PR: kern/167947 PR: kern/187552 PR: kern/187549 PR: kern/187550 PR: kern/187553 Discussed with: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic Corporation 2014-03-20 20:39:41 +00:00			`TESTS_SUBDIRS+= netinet`
Add some new modes to OpenCrypto. These modes are AES-ICM (can be used for counter mode), and AES-GCM. Both of these modes have been added to the aesni module. Included is a set of tests to validate that the software and aesni module calculate the correct values. These use the NIST KAT test vectors. To run the test, you will need to install a soon to be committed port, nist-kat that will install the vectors. Using a port is necessary as the test vectors are around 25MB. All the man pages were updated. I have added a new man page, crypto.7, which includes a description of how to use each mode. All the new modes and some other AES modes are present. It would be good for someone else to go through and document the other modes. A new ioctl was added to support AEAD modes which AES-GCM is one of them. Without this ioctl, it is not possible to test AEAD modes from userland. Add a timing safe bcmp for use to compare MACs. Previously we were using bcmp which could leak timing info and result in the ability to forge messages. Add a minor optimization to the aesni module so that single segment mbufs don't get copied and instead are updated in place. The aesni module needs to be updated to support blocked IO so segmented mbufs don't have to be copied. We require that the IV be specified for all calls for both GCM and ICM. This is to ensure proper use of these functions. Obtained from: p4: //depot/projects/opencrypto Relnotes: yes Sponsored by: FreeBSD Foundation Sponsored by: NetGate 2014-12-12 19:56:36 +00:00			`TESTS_SUBDIRS+= opencrypto`
Integrate tools/test/posixshm and tools/regression/posixshm into the FreeBSD test suite as tests/sys/posixshm Some other highlights: - Convert the testcases over to ATF - Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use mkstemp to generate temporary paths for non-SHM_ANON shm objects. MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division 2015-10-17 04:32:21 +00:00			`TESTS_SUBDIRS+= posixshm`
Integrate tools/regression/vfs into the FreeBSD test suite as tests/sys/vfs MFC after: 1 week Sponsored by: EMC / Isilon Storage Division 2015-10-14 08:16:15 +00:00			`TESTS_SUBDIRS+= vfs`
Move tests/sys/kern/mmap_test to tests/sys/vm/mmap_test As jhb noted, the actual mmap(2) implementation is under sys/vm, not sys/kern/, so the correct logical place is tests/sys/vm/, not tests/sys/kern/ X-MFC with: r282076 MFC after: 6 days 2015-04-27 17:53:09 +00:00			`TESTS_SUBDIRS+= vm`
Integrate pjdfstest test suite execution into kyua pjdfstest execution is opt-in and must be done as root due to some of the assumptions made by the test suite and lack of error checking in the non-root case A description of how to execute pjdfstest with kyua is provided in share/pjdfstest/README Phabric: D824 (an earlier prototype patch) MFC after: 1 month Relnotes: yes Sponsored by: EMC / Isilon Storage Division 2014-11-03 07:18:42 +00:00
			`# Items not integrated into kyua runs by default`
			`SUBDIR+= pjdfstest`
Replace the old unix_seqpacket and unix_seqpacket_exercise tests, which were a little broken and not automatable, with unix_seqpacket_test. It's coverage is a superset of the old tests and it uses ATF. It includes test cases for bugs kern/185813 and kern/185812. PR: kern/185812 PR: kern/185813 Sponsored by: Spectra Logic MFC after: 2 weeks 2014-01-23 17:26:28 +00:00
Add more SUBDIR_PARALLEL. MFC after: 3 weeks Sponsored by: EMC / Isilon Storage Division 2015-10-15 22:55:08 +00:00			`SUBDIR_PARALLEL=`

Replace the old unix_seqpacket and unix_seqpacket_exercise tests, which were a little broken and not automatable, with unix_seqpacket_test. It's coverage is a superset of the old tests and it uses ATF. It includes test cases for bugs kern/185813 and kern/185812. PR: kern/185812 PR: kern/185813 Sponsored by: Spectra Logic MFC after: 2 weeks 2014-01-23 17:26:28 +00:00			`.include <bsd.test.mk>`