freebsd-nq/sys/dev/fb/vgareg.h

98 lines
3.8 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
#ifndef _DEV_FB_VGAREG_H_
#define _DEV_FB_VGAREG_H_
/* physical addresses */
#define MDA_BUF_BASE 0xb0000
#define MDA_BUF_SIZE 0x08000
#define MDA_BUF BIOS_PADDRTOVADDR(MDA_BUF_BASE)
#define CGA_BUF_BASE 0xb8000
#define CGA_BUF_SIZE 0x08000
#define CGA_BUF BIOS_PADDRTOVADDR(CGA_BUF_BASE)
#define EGA_BUF_BASE 0xa0000
#define EGA_BUF_SIZE 0x20000
#define EGA_BUF BIOS_PADDRTOVADDR(EGA_BUF_BASE)
#define GRAPHICS_BUF_BASE 0xa0000
#define GRAPHICS_BUF_SIZE 0x10000
#define GRAPHICS_BUF BIOS_PADDRTOVADDR(GRAPHICS_BUF_BASE)
#define FONT_BUF BIOS_PADDRTOVADDR(GRAPHICS_BUF_BASE)
#define VIDEO_BUF_BASE 0xa0000
#define VIDEO_BUF_SIZE 0x20000
/* I/O port addresses */
#define MONO_CRTC (IO_MDA + 0x04) /* crt controller base mono */
#define COLOR_CRTC (IO_CGA + 0x04) /* crt controller base color */
#define MISC (IO_VGA + 0x02) /* misc output register */
#define ATC (IO_VGA + 0x00) /* attribute controller */
#define TSIDX (IO_VGA + 0x04) /* timing sequencer idx */
#define TSREG (IO_VGA + 0x05) /* timing sequencer data */
#define PIXMASK (IO_VGA + 0x06) /* pixel write mask */
#define PALRADR (IO_VGA + 0x07) /* palette read address */
#define PALWADR (IO_VGA + 0x08) /* palette write address */
#define PALDATA (IO_VGA + 0x09) /* palette data register */
#define GDCIDX (IO_VGA + 0x0E) /* graph data controller idx */
#define GDCREG (IO_VGA + 0x0F) /* graph data controller data */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#define VGA_DRIVER_NAME "vga"
#define VGA_UNIT(dev) minor(dev)
#define VGA_MKMINOR(unit) (unit)
#ifdef _KERNEL
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
struct video_adapter;
typedef struct vga_softc {
struct video_adapter *adp;
#ifdef FB_INSTALL_CDEV
genfb_softc_t gensc;
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} vga_softc_t;
int vga_probe_unit(int unit, struct video_adapter *adp, int flags);
int vga_attach_unit(int unit, vga_softc_t *sc, int flags);
#ifdef FB_INSTALL_CDEV
int vga_open(struct cdev *dev, vga_softc_t *sc, int flag, int mode,
struct thread *td);
int vga_close(struct cdev *dev, vga_softc_t *sc, int flag, int mode,
struct thread *td);
int vga_read(struct cdev *dev, vga_softc_t *sc, struct uio *uio, int flag);
int vga_write(struct cdev *dev, vga_softc_t *sc, struct uio *uio, int flag);
int vga_ioctl(struct cdev *dev, vga_softc_t *sc, u_long cmd, caddr_t arg,
int flag, struct thread *td);
int vga_mmap(struct cdev *dev, vga_softc_t *sc, vm_offset_t offset,
vm_offset_t *paddr, int prot);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
extern int (*vga_sub_configure)(int flags);
#endif /* _KERNEL */
#endif /* _DEV_FB_VGAREG_H_ */