d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b58b38031d
freebsd-nq/sys/dev/firewire/iec68113.h

128 lines
3.5 KiB
C
Raw Normal View History

Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial Bus Protocol 2:SCSI over IEEE1394) support for CAM.
2002-09-13 12:31:56 +00:00
/*
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
* Copyright (c) 2003 Hidetoshi Shimokawa
* Copyright (c) 1998-2002 Katsushi Kobayashi and Hidetoshi Shimokawa
Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial Bus Protocol 2:SCSI over IEEE1394) support for CAM.
2002-09-13 12:31:56 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the acknowledgement as bellow:
*
* This product includes software developed by K. Kobayashi and H. Shimokawa
*
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
Move CSR definitions to iec*.h from firewirereg.h.
2003-04-29 13:27:13 +00:00
#define DV_BROADCAST_ON (1<<30)
#define oMPR 0x900
#define oPCR 0x904
#define iMPR 0x980
#define iPCR 0x984
Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial Bus Protocol 2:SCSI over IEEE1394) support for CAM.
2002-09-13 12:31:56 +00:00
struct ciphdr {
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t eoh0:1, /* 0 */
form0:1, /* 0 */
src:6;
#else
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t src:6,
form0:1, /* 0 */
eoh0:1; /* 0 */
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#endif
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t len;
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t fn:2,
qpc:3,
sph:1,
:2;
#else
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t :2,
sph:1,
qpc:3,
Fix typo Submitted by: Masahiro Ito <m_itoh@mub.biglobe.ne.jp>
2003-02-21 02:09:39 +00:00
fn:2;
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#endif
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t dbc;
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t eoh1:1, /* 1 */
form1:1, /* 0 */
fmt:6;
#else
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t fmt:6,
form1:1, /* 0 */
eoh1:1; /* 1 */
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#endif
#define CIP_FMT_DVCR 0
#define CIP_FMT_MPEG (1<<5)
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
union {
struct {
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t fs:1, /* 50/60 field system
NTSC/PAL */
stype:5,
:2;
#else
u_int8_t :2,
stype:5,
fs:1; /* 50/60 field system
NTSC/PAL */
#endif
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
#define CIP_STYPE_SD 0
#define CIP_STYPE_SDL 1
#define CIP_STYPE_HD 2
u_int16_t cyc:16; /* take care of byte order! */
} __attribute__ ((packed)) dv;
u_int8_t bytes[3];
} fdf;
Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial Bus Protocol 2:SCSI over IEEE1394) support for CAM.
2002-09-13 12:31:56 +00:00
};
struct dvdbc{
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t sct:3, /* Section type */
:1, /* Reserved */
arb:4; /* Arbitrary bit */
#else
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t arb:4, /* Arbitrary bit */
:1, /* Reserved */
sct:3; /* Section type */
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#endif
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
#define DV_SCT_HEADER 0
#define DV_SCT_SUBCODE 1
#define DV_SCT_VAUX 2
#define DV_SCT_AUDIO 3
#define DV_SCT_VIDEO 4
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t dseq:4, /* DIF sequence number */
fsc:1, /* ID of a DIF block in each channel */
:3;
#else
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t :3,
fsc:1, /* ID of a DIF block in each channel */
dseq:4; /* DIF sequence number */
MFp4(simokawa_firewire): Many internal structure changes for the FireWire driver. - Compute CRC in CROM parsing. - Add support for configuration ROM build. - Simplify dummy buffer handling. - busdma conversion - Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE. - AR buffer handling. Don't reallocate AR buffer but just recycle it. Don't malloc and copy per packet in fwohci_arcv(). Pass packet to fw_rcv() using iovec. Application must prepare receiving buffer in advance. - Change fw_bind API so that application should pre-allocate xfer structure. - Add fw_xfer_unload() for recycling struct fw_xfer. - Add post_busreset hook - Remove unused 'sub' and 'act_type' in struct fw_xfer. - Remove npacket from struct fw_bulkxfer. - Don't call back handlers in fwochi_arcv() if the packet has not drained in AT queue - Make firewire works on big endian platform. - Use native endian for packet header and remove unnecessary ntohX/htonX. - Remove FWXFERQ_PACKET mode. We don't use it anymore. - Remove unnecessary restriction of FWSTMAXCHUNK. - Don't set root node for phy config packet if the root node is not cycle master capable but set myself for root node. We should be the root node after next bus reset. Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp> - Improve self id handling Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
#endif
Merge big endian and little endian case. Fill fdf bit fields and others.
2003-01-13 15:08:48 +00:00
u_int8_t dbn; /* DIF block number */
u_int8_t payload[77];
#define DV_DSF_12 0x80 /* PAL: payload[0] in Header DIF */
Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial Bus Protocol 2:SCSI over IEEE1394) support for CAM.
2002-09-13 12:31:56 +00:00
};
Reference in New Issue Copy Permalink