freebsd-nq/sys/dev/nvme/nvme_uio.c

205 lines
5.4 KiB
C
Raw Normal View History

This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
/*-
* Copyright (C) 2012 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/proc.h>
#include <sys/uio.h>
#include "nvme_private.h"
static void
nvme_uio_done(void *arg, const struct nvme_completion *status)
{
struct mtx *mtx;
struct uio *uio = arg;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (status->sf_sc == 0 && status->sf_sct == 0)
uio->uio_resid = 0;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
mtx = mtx_pool_find(mtxpool_sleep, arg);
mtx_lock(mtx);
wakeup(arg);
mtx_unlock(mtx);
}
void
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_payload_map_uio(void *arg, bus_dma_segment_t *seg, int nseg,
bus_size_t mapsize, int error)
{
struct nvme_tracker *tr = arg;
/*
* Now that we know the actual size of the uio, divide it by the
* sector size that we stored in cdw12.
*/
tr->req->cmd.cdw12 = (mapsize / tr->req->cmd.cdw12)-1;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_payload_map(arg, seg, nseg, error);
}
static int
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_read_uio(struct nvme_namespace *ns, struct uio *uio)
{
struct nvme_request *req;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
struct nvme_command *cmd;
uint64_t lba;
req = nvme_allocate_request_uio(uio, nvme_uio_done, uio);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
if (req == NULL)
return (ENOMEM);
cmd = &req->cmd;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
cmd->opc = NVME_OPC_READ;
cmd->nsid = ns->id;
lba = uio->uio_offset / nvme_ns_get_sector_size(ns);
*(uint64_t *)&cmd->cdw10 = lba;
/*
* Store the sector size in cdw12 (where the LBA count normally goes).
* We'll adjust cdw12 in the map_uio callback based on the mapsize
* parameter. This allows us to not have to store the namespace
* in the request simply to get the sector size in the map_uio
* callback.
*/
cmd->cdw12 = nvme_ns_get_sector_size(ns);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_ctrlr_submit_io_request(ns->ctrlr, req);
return (0);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
static int
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_write_uio(struct nvme_namespace *ns, struct uio *uio)
{
struct nvme_request *req;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
struct nvme_command *cmd;
uint64_t lba;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
req = nvme_allocate_request_uio(uio, nvme_uio_done, uio);
if (req == NULL)
return (ENOMEM);
cmd = &req->cmd;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
cmd->opc = NVME_OPC_WRITE;
cmd->nsid = ns->id;
lba = uio->uio_offset / nvme_ns_get_sector_size(ns);
*(uint64_t *)&cmd->cdw10 = lba;
/*
* Store the sector size in cdw12 (where the LBA count normally goes).
* We'll adjust cdw12 in the map_uio callback based on the mapsize
* parameter. This allows us to not have to store the namespace
* in the request simply to get the sector size in the map_uio
* callback.
*/
cmd->cdw12 = nvme_ns_get_sector_size(ns);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
nvme_ctrlr_submit_io_request(ns->ctrlr, req);
return (0);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}
int
nvme_ns_physio(struct cdev *dev, struct uio *uio, int ioflag)
{
struct uio uio_tmp;
struct iovec uio_iov_tmp;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
struct nvme_namespace *ns;
struct mtx *mtx;
int i, nvme_err, physio_err = 0;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
#if __FreeBSD_version > 900017
int ref;
#endif
PHOLD(curproc);
ns = dev->si_drv1;
mtx = mtx_pool_find(mtxpool_sleep, &uio_tmp);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
#if __FreeBSD_version > 900017
dev_refthread(dev, &ref);
#else
dev_refthread(dev);
#endif
/*
* NVM Express doesn't really support true SGLs. All SG elements
* must be PAGE_SIZE, except for the first and last element.
* Because of this, we need to break up each iovec into a separate
* NVMe command - otherwise we could end up with sub-PAGE_SIZE
* elements in the middle of an SGL which is not allowed.
*/
uio_tmp.uio_iov = &uio_iov_tmp;
uio_tmp.uio_iovcnt = 1;
uio_tmp.uio_offset = uio->uio_offset;
uio_tmp.uio_segflg = uio->uio_segflg;
uio_tmp.uio_rw = uio->uio_rw;
uio_tmp.uio_td = uio->uio_td;
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
for (i = 0; i < uio->uio_iovcnt; i++) {
uio_iov_tmp.iov_base = uio->uio_iov[i].iov_base;
uio_iov_tmp.iov_len = uio->uio_iov[i].iov_len;
uio_tmp.uio_resid = uio_iov_tmp.iov_len;
mtx_lock(mtx);
if (uio->uio_rw == UIO_READ)
nvme_err = nvme_read_uio(ns, &uio_tmp);
else
nvme_err = nvme_write_uio(ns, &uio_tmp);
if (nvme_err == 0)
msleep(&uio_tmp, mtx, PRIBIO, "nvme_physio", 0);
mtx_unlock(mtx);
if (uio_tmp.uio_resid == 0) {
uio->uio_resid -= uio_iov_tmp.iov_len;
uio->uio_offset += uio_iov_tmp.iov_len;
} else {
physio_err = EFAULT;
break;
}
uio_tmp.uio_offset += uio_iov_tmp.iov_len;
}
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
#if __FreeBSD_version > 900017
dev_relthread(dev, ref);
#else
dev_relthread(dev);
#endif
PRELE(curproc);
return (physio_err);
This is the first of several commits which will add NVM Express (NVMe) support to FreeBSD. A full description of the overall functionality being added is below. nvmexpress.org defines NVM Express as "an optimized register interface, command set and feature set fo PCI Express (PCIe)-based Solid-State Drives (SSDs)." This commit adds nvme(4) and nvd(4) driver source code and Makefiles to the tree. Full NVMe functionality description: Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe) device support. There will continue to be ongoing work on NVM Express support, but there is more than enough to allow for evaluation of pre-production NVM Express devices as well as soliciting feedback. Questions and feedback are welcome. nvme(4) implements NVMe hardware abstraction and is a provider of NVMe namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN. nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks. nvmecontrol(8) is used for NVMe configuration and management. The following are currently supported: nvme(4) - full mandatory NVM command set support - per-CPU IO queues (enabled by default but configurable) - per-queue sysctls for statistics and full command/completion queue dumps for debugging - registration API for NVMe namespace consumers - I/O error handling (except for timeoutsee below) - compilation switches for support back to stable-7 nvd(4) - BIO_DELETE and BIO_FLUSH (if supported by controller) - proper BIO_ORDERED handling nvmecontrol(8) - devlist: list NVMe controllers and their namespaces - identify: display controller or namespace identify data in human-readable or hex format - perftest: quick and dirty performance test to measure raw performance of NVMe device without userspace/physio/GEOM overhead The following are still work in progress and will be completed over the next 3-6 months in rough priority order: - complete man pages - firmware download and activation - asynchronous error requests - command timeout error handling - controller resets - nvmecontrol(8) log page retrieval This has been primarily tested on amd64, with light testing on i386. I would be happy to provide assistance to anyone interested in porting this to other architectures, but am not currently planning to do this work myself. Big-endian and dmamap sync for command/completion queues are the main areas that would need to be addressed. The nvme(4) driver currently has references to Chatham, which is an Intel-developed prototype board which is not fully spec compliant. These references will all be removed over time. Sponsored by: Intel Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
2012-09-17 19:23:01 +00:00
}