freebsd-nq/sys/pci/pcivar.h

204 lines
7.4 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#ifndef PCI_COMPAT
#define PCI_COMPAT
#endif
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id$
*
*/
/* some PCI bus constants */
#define PCI_BUSMAX 255 /* highest supported bus number */
#define PCI_SLOTMAX 31 /* highest supported slot number */
#define PCI_FUNCMAX 7 /* highest supported function number */
#define PCI_REGMAX 255 /* highest supported config register addr. */
#define PCI_MAXMAPS_0 6 /* max. no. of memory/port maps */
#define PCI_MAXMAPS_1 2 /* max. no. of maps for PCI to PCI bridge */
#define PCI_MAXMAPS_2 1 /* max. no. of maps for CardBus bridge */
/* pci_addr_t covers this system's PCI bus address space: 32 or 64 bit */
#ifdef PCI_A64
typedef u_int64_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#else
typedef u_int32_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#endif
/* map register information */
typedef struct {
u_int32_t base;
u_int8_t type;
#define PCI_MAPMEM 0x01 /* memory map */
#define PCI_MAPMEMP 0x02 /* prefetchable memory map */
#define PCI_MAPPORT 0x04 /* port map */
u_int8_t ln2size;
u_int8_t ln2range;
/* u_int8_t dummy;*/
} pcimap;
/* config header information common to all header types */
typedef struct pcicfg {
struct pcicfg *parent;
struct pcicfg *next;
pcimap *map; /* pointer to array of PCI maps */
void *hdrspec; /* pointer to header type specific data */
u_int16_t subvendor; /* card vendor ID */
u_int16_t subdevice; /* card device ID, assigned by card vendor */
u_int16_t vendor; /* chip vendor ID */
u_int16_t device; /* chip device ID, assigned by chip vendor */
u_int16_t cmdreg; /* disable/enable chip and PCI options */
u_int16_t statreg; /* supported PCI features and error state */
u_int8_t class; /* chip PCI class */
u_int8_t subclass; /* chip PCI subclass */
u_int8_t progif; /* chip PCI programming interface */
u_int8_t revid; /* chip revision ID */
u_int8_t hdrtype; /* chip config header type */
u_int8_t cachelnsz; /* cache line size in 4byte units */
u_int8_t intpin; /* PCI interrupt pin */
u_int8_t intline; /* interrupt line (IRQ for PC arch) */
u_int8_t mingnt; /* min. useful bus grant time in 250ns units */
u_int8_t maxlat; /* max. tolerated bus grant latency in 250ns */
u_int8_t lattimer; /* latency timer in units of 30ns bus cycles */
u_int8_t mfdev; /* multi-function device (from hdrtype reg) */
u_int8_t nummaps; /* actual number of PCI maps used */
u_int8_t bus; /* config space bus address */
u_int8_t slot; /* config space slot address */
u_int8_t func; /* config space function number */
u_int8_t secondarybus; /* bus on secondary side of bridge, if any */
u_int8_t subordinatebus; /* topmost bus number behind bridge, if any */
} pcicfgregs;
/* additional type 1 device config header information (PCI to PCI bridge) */
#ifdef PCI_A64
#define PCI_PPBMEMBASE(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
#else
#define PCI_PPBMEMBASE(h,l) (((l)<<16) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) (((l)<<16) | 0xfffff)
#endif /* PCI_A64 */
#define PCI_PPBIOBASE(h,l) ((((h)<<16) + ((l)<<8)) & ~0xfff)
#define PCI_PPBIOLIMIT(h,l) ((((h)<<16) + ((l)<<8)) | 0xfff)
typedef struct {
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
u_int32_t membase; /* base address of memory window */
u_int32_t memlimit; /* topmost address of memory window */
u_int32_t iobase; /* base address of port window */
u_int32_t iolimit; /* topmost address of port window */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih1cfgregs;
/* additional type 2 device config header information (CardBus bridge) */
typedef struct {
u_int32_t membase0; /* base address of memory window */
u_int32_t memlimit0; /* topmost address of memory window */
u_int32_t membase1; /* base address of memory window */
u_int32_t memlimit1; /* topmost address of memory window */
u_int32_t iobase0; /* base address of port window */
u_int32_t iolimit0; /* topmost address of port window */
u_int32_t iobase1; /* base address of port window */
u_int32_t iolimit1; /* topmost address of port window */
u_int32_t pccardif; /* PC Card 16bit IF legacy more base addr. */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih2cfgregs;
/* PCI bus attach definitions (there could be multiple PCI bus *trees* ... */
typedef struct pciattach {
int unit;
int pcibushigh;
struct pciattach *next;
} pciattach;
/* externally visible functions */
int pci_probe (pciattach *attach);
void pci_drvattach(pcicfgregs *cfg);
/* low level PCI config register functions provided by pcibus.c */
int pci_cfgopen (void);
int pci_cfgread (pcicfgregs *cfg, int reg, int bytes);
void pci_cfgwrite (pcicfgregs *cfg, int reg, int data, int bytes);
/* for compatibility to FreeBSD-2.2 version of PCI code */
#ifdef PCI_COMPAT
typedef pcicfgregs *pcici_t;
typedef unsigned pcidi_t;
typedef void pci_inthand_t(void *arg);
#define pci_max_burst_len (3)
/* just copied from old PCI code for now ... */
extern struct linker_set pcidevice_set;
extern int pci_mechanism;
struct pci_device {
char* pd_name;
char* (*pd_probe ) (pcici_t tag, pcidi_t type);
void (*pd_attach) (pcici_t tag, int unit);
u_long *pd_count;
int (*pd_shutdown) (int, int);
};
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
struct pci_lkm {
struct pci_device *dvp;
struct pci_lkm *next;
};
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_long pci_conf_read (pcici_t tag, u_long reg);
void pci_conf_write (pcici_t tag, u_long reg, u_long data);
int pci_map_port (pcici_t tag, u_long reg, u_short* pa);
int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa);
int pci_map_int (pcici_t tag, pci_inthand_t *func, void *arg, unsigned *maskptr);
int pci_unmap_int (pcici_t tag);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int pci_register_lkm (struct pci_device *dvp, int if_revision);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#endif /* PCI_COMPAT */