These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
1994-05-24 10:09:53 +00:00
|
|
|
* Copyright (c) 1991, 1993
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to Berkeley by
|
|
|
|
* The Mach Operating System project at Carnegie-Mellon University.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
2000-03-27 20:41:17 +00:00
|
|
|
* must display the following acknowledgement:
|
1994-05-24 10:09:53 +00:00
|
|
|
* This product includes software developed by the University of
|
|
|
|
* California, Berkeley and its contributors.
|
|
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
1994-08-02 07:55:43 +00:00
|
|
|
* from: @(#)vm_object.c 8.5 (Berkeley) 3/22/94
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
|
|
|
*
|
|
|
|
* Copyright (c) 1987, 1990 Carnegie-Mellon University.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Authors: Avadis Tevanian, Jr., Michael Wayne Young
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
1994-05-24 10:09:53 +00:00
|
|
|
* Permission to use, copy, modify and distribute this software and
|
|
|
|
* its documentation is hereby granted, provided that both the copyright
|
|
|
|
* notice and this permission notice appear in all copies of the
|
|
|
|
* software, derivative works or modified versions, and any portions
|
|
|
|
* thereof, and that both notices appear in supporting documentation.
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
|
|
|
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
|
|
|
|
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
|
1994-05-24 10:09:53 +00:00
|
|
|
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
1994-05-24 10:09:53 +00:00
|
|
|
* Carnegie Mellon requests users of this software to return to
|
|
|
|
*
|
|
|
|
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
|
|
|
|
* School of Computer Science
|
|
|
|
* Carnegie Mellon University
|
|
|
|
* Pittsburgh PA 15213-3890
|
|
|
|
*
|
|
|
|
* any improvements or extensions that they make and grant Carnegie the
|
|
|
|
* rights to redistribute these changes.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Virtual memory object module.
|
|
|
|
*/
|
|
|
|
|
2003-06-11 23:50:51 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
2001-05-01 08:13:21 +00:00
|
|
|
#include <sys/lock.h>
|
1996-05-19 07:36:50 +00:00
|
|
|
#include <sys/mman.h>
|
1998-05-21 07:47:58 +00:00
|
|
|
#include <sys/mount.h>
|
2002-03-06 02:42:56 +00:00
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/sysctl.h>
|
2001-01-24 12:35:55 +00:00
|
|
|
#include <sys/mutex.h>
|
2001-05-01 08:13:21 +00:00
|
|
|
#include <sys/proc.h> /* for curproc, pageproc */
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/vnode.h>
|
|
|
|
#include <sys/vmmeter.h>
|
2001-03-28 11:52:56 +00:00
|
|
|
#include <sys/sx.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
#include <vm/vm.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_param.h>
|
|
|
|
#include <vm/pmap.h>
|
|
|
|
#include <vm/vm_map.h>
|
|
|
|
#include <vm/vm_object.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
#include <vm/vm_page.h>
|
1994-05-25 09:21:21 +00:00
|
|
|
#include <vm/vm_pageout.h>
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
#include <vm/vm_pager.h>
|
1994-10-09 01:52:19 +00:00
|
|
|
#include <vm/swap_pager.h>
|
1995-02-02 09:09:15 +00:00
|
|
|
#include <vm/vm_kern.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_extern.h>
|
2002-03-20 04:02:59 +00:00
|
|
|
#include <vm/uma.h>
|
1994-05-25 09:21:21 +00:00
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
#define EASY_SCAN_FACTOR 8
|
|
|
|
|
|
|
|
#define MSYNC_FLUSH_HARDSEQ 0x01
|
|
|
|
#define MSYNC_FLUSH_SOFTSEQ 0x02
|
|
|
|
|
|
|
|
/*
|
|
|
|
* msync / VM object flushing optimizations
|
|
|
|
*/
|
|
|
|
static int msync_flush_flags = MSYNC_FLUSH_HARDSEQ | MSYNC_FLUSH_SOFTSEQ;
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, msync_flush_flags,
|
|
|
|
CTLFLAG_RW, &msync_flush_flags, 0, "");
|
|
|
|
|
|
|
|
static void vm_object_qcollapse(vm_object_t object);
|
|
|
|
static int vm_object_page_collect_flush(vm_object_t object, vm_page_t p, int curgeneration, int pagerflags);
|
1995-04-09 06:03:56 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
|
|
|
* Virtual memory objects maintain the actual data
|
|
|
|
* associated with allocated virtual memory. A given
|
|
|
|
* page of memory exists within exactly one object.
|
|
|
|
*
|
|
|
|
* An object is only deallocated when all "references"
|
|
|
|
* are given up. Only one "reference" to a given
|
|
|
|
* region of an object should be writeable.
|
|
|
|
*
|
|
|
|
* Associated with each object is a list of all resident
|
|
|
|
* memory pages belonging to that object; this list is
|
|
|
|
* maintained by the "vm_page" module, and locked by the object's
|
|
|
|
* lock.
|
|
|
|
*
|
|
|
|
* Each object also records a "pager" routine which is
|
|
|
|
* used to retrieve (and store) pages to the proper backing
|
|
|
|
* storage. In addition, objects may be backed by other
|
|
|
|
* objects from which they were virtual-copied.
|
|
|
|
*
|
|
|
|
* The only items within the object structure which are
|
|
|
|
* modified after time of creation are:
|
|
|
|
* reference count locked by object's lock
|
|
|
|
* pager routine locked by object's lock
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
1995-07-29 11:44:31 +00:00
|
|
|
struct object_q vm_object_list;
|
2002-04-20 07:23:22 +00:00
|
|
|
struct mtx vm_object_list_mtx; /* lock for object list and count */
|
2003-06-01 23:59:48 +00:00
|
|
|
|
|
|
|
struct vm_object kernel_object_store;
|
|
|
|
struct vm_object kmem_object_store;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1995-12-14 09:55:16 +00:00
|
|
|
static long object_collapses;
|
|
|
|
static long object_bypasses;
|
2002-05-06 03:34:17 +00:00
|
|
|
static int next_index;
|
2002-03-20 04:02:59 +00:00
|
|
|
static uma_zone_t obj_zone;
|
1997-09-21 04:24:27 +00:00
|
|
|
#define VM_OBJECTS_INIT 256
|
2002-03-19 09:11:49 +00:00
|
|
|
|
|
|
|
static void vm_object_zinit(void *mem, int size);
|
|
|
|
|
|
|
|
#ifdef INVARIANTS
|
|
|
|
static void vm_object_zdtor(void *mem, int size, void *arg);
|
|
|
|
|
|
|
|
static void
|
|
|
|
vm_object_zdtor(void *mem, int size, void *arg)
|
|
|
|
{
|
|
|
|
vm_object_t object;
|
|
|
|
|
|
|
|
object = (vm_object_t)mem;
|
2003-10-26 06:29:26 +00:00
|
|
|
KASSERT(TAILQ_EMPTY(&object->memq),
|
|
|
|
("object %p has resident pages",
|
|
|
|
object));
|
2002-03-19 09:11:49 +00:00
|
|
|
KASSERT(object->paging_in_progress == 0,
|
|
|
|
("object %p paging_in_progress = %d",
|
|
|
|
object, object->paging_in_progress));
|
|
|
|
KASSERT(object->resident_page_count == 0,
|
|
|
|
("object %p resident_page_count = %d",
|
|
|
|
object, object->resident_page_count));
|
|
|
|
KASSERT(object->shadow_count == 0,
|
|
|
|
("object %p shadow_count = %d",
|
|
|
|
object, object->shadow_count));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static void
|
|
|
|
vm_object_zinit(void *mem, int size)
|
|
|
|
{
|
|
|
|
vm_object_t object;
|
|
|
|
|
|
|
|
object = (vm_object_t)mem;
|
2002-12-29 21:01:14 +00:00
|
|
|
bzero(&object->mtx, sizeof(object->mtx));
|
2003-04-28 03:45:35 +00:00
|
|
|
VM_OBJECT_LOCK_INIT(object);
|
2002-03-19 09:11:49 +00:00
|
|
|
|
|
|
|
/* These are true for any object that has been freed */
|
|
|
|
object->paging_in_progress = 0;
|
|
|
|
object->resident_page_count = 0;
|
|
|
|
object->shadow_count = 0;
|
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1997-08-05 00:02:08 +00:00
|
|
|
void
|
2002-06-25 22:14:06 +00:00
|
|
|
_vm_object_allocate(objtype_t type, vm_pindex_t size, vm_object_t object)
|
1994-05-25 09:21:21 +00:00
|
|
|
{
|
2002-12-19 20:01:22 +00:00
|
|
|
int incr;
|
2001-07-04 16:20:28 +00:00
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
TAILQ_INIT(&object->memq);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_INIT(&object->shadow_head);
|
1995-02-02 09:09:15 +00:00
|
|
|
|
2002-10-18 17:24:30 +00:00
|
|
|
object->root = NULL;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
object->type = type;
|
1994-05-25 09:21:21 +00:00
|
|
|
object->size = size;
|
2003-09-13 20:07:26 +00:00
|
|
|
object->generation = 1;
|
1995-02-02 09:09:15 +00:00
|
|
|
object->ref_count = 1;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
object->flags = 0;
|
2001-05-23 22:42:10 +00:00
|
|
|
if ((object->type == OBJT_DEFAULT) || (object->type == OBJT_SWAP))
|
2003-06-09 06:50:02 +00:00
|
|
|
object->flags = OBJ_ONEMAPPING;
|
2002-05-06 03:34:17 +00:00
|
|
|
if (size > (PQ_L2_SIZE / 3 + PQ_PRIME1))
|
|
|
|
incr = PQ_L2_SIZE / 3 + PQ_PRIME1;
|
|
|
|
else
|
|
|
|
incr = size;
|
|
|
|
do
|
2002-05-04 20:23:48 +00:00
|
|
|
object->pg_color = next_index;
|
2002-05-06 03:34:17 +00:00
|
|
|
while (!atomic_cmpset_int(&next_index, object->pg_color,
|
|
|
|
(object->pg_color + incr) & PQ_L2_MASK));
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
object->handle = NULL;
|
|
|
|
object->backing_object = NULL;
|
1995-12-11 04:58:34 +00:00
|
|
|
object->backing_object_offset = (vm_ooffset_t) 0;
|
1995-02-02 09:09:15 +00:00
|
|
|
|
2002-04-20 07:23:22 +00:00
|
|
|
mtx_lock(&vm_object_list_mtx);
|
2001-05-23 22:42:10 +00:00
|
|
|
TAILQ_INSERT_TAIL(&vm_object_list, object, object_list);
|
2002-04-20 07:23:22 +00:00
|
|
|
mtx_unlock(&vm_object_list_mtx);
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* vm_object_init:
|
|
|
|
*
|
|
|
|
* Initialize the VM objects module.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_init(void)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
|
|
|
TAILQ_INIT(&vm_object_list);
|
2002-04-04 21:03:38 +00:00
|
|
|
mtx_init(&vm_object_list_mtx, "vm object_list", NULL, MTX_DEF);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
|
2003-04-28 03:45:35 +00:00
|
|
|
VM_OBJECT_LOCK_INIT(&kernel_object_store);
|
1995-12-11 04:58:34 +00:00
|
|
|
_vm_object_allocate(OBJT_DEFAULT, OFF_TO_IDX(VM_MAX_KERNEL_ADDRESS - VM_MIN_KERNEL_ADDRESS),
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
kernel_object);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-05-09 02:13:23 +00:00
|
|
|
/*
|
|
|
|
* The kmem object's mutex is given a unique name, instead of
|
|
|
|
* "vm object", to avoid false reports of lock-order reversal
|
|
|
|
* with a system map mutex.
|
|
|
|
*/
|
|
|
|
mtx_init(VM_OBJECT_MTX(kmem_object), "kmem object", NULL, MTX_DEF);
|
1995-12-11 04:58:34 +00:00
|
|
|
_vm_object_allocate(OBJT_DEFAULT, OFF_TO_IDX(VM_MAX_KERNEL_ADDRESS - VM_MIN_KERNEL_ADDRESS),
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
kmem_object);
|
2003-04-28 03:45:35 +00:00
|
|
|
|
2002-03-19 09:11:49 +00:00
|
|
|
obj_zone = uma_zcreate("VM OBJECT", sizeof (struct vm_object), NULL,
|
|
|
|
#ifdef INVARIANTS
|
|
|
|
vm_object_zdtor,
|
|
|
|
#else
|
|
|
|
NULL,
|
|
|
|
#endif
|
2003-10-04 14:21:53 +00:00
|
|
|
vm_object_zinit, NULL, UMA_ALIGN_PTR, UMA_ZONE_VM|UMA_ZONE_NOFREE);
|
2002-03-19 09:11:49 +00:00
|
|
|
uma_prealloc(obj_zone, VM_OBJECTS_INIT);
|
1997-09-21 04:24:27 +00:00
|
|
|
}
|
|
|
|
|
2001-07-04 20:15:18 +00:00
|
|
|
void
|
|
|
|
vm_object_clear_flag(vm_object_t object, u_short bits)
|
|
|
|
{
|
2003-01-03 19:19:08 +00:00
|
|
|
|
2003-04-21 06:33:52 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-31 04:03:53 +00:00
|
|
|
object->flags &= ~bits;
|
2001-07-04 20:15:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vm_object_pip_add(vm_object_t object, short i)
|
|
|
|
{
|
2003-04-13 00:43:48 +00:00
|
|
|
|
2003-04-21 06:33:52 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-31 04:03:53 +00:00
|
|
|
object->paging_in_progress += i;
|
2001-07-04 20:15:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vm_object_pip_subtract(vm_object_t object, short i)
|
|
|
|
{
|
2003-04-21 06:33:52 +00:00
|
|
|
|
2003-04-19 22:11:41 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-31 04:03:53 +00:00
|
|
|
object->paging_in_progress -= i;
|
2001-07-04 20:15:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vm_object_pip_wakeup(vm_object_t object)
|
|
|
|
{
|
2003-04-13 00:43:48 +00:00
|
|
|
|
2003-04-21 06:33:52 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-31 04:03:53 +00:00
|
|
|
object->paging_in_progress--;
|
2001-07-04 20:15:18 +00:00
|
|
|
if ((object->flags & OBJ_PIPWNT) && object->paging_in_progress == 0) {
|
|
|
|
vm_object_clear_flag(object, OBJ_PIPWNT);
|
|
|
|
wakeup(object);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vm_object_pip_wakeupn(vm_object_t object, short i)
|
|
|
|
{
|
2003-04-21 06:33:52 +00:00
|
|
|
|
2003-04-19 21:15:44 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-04 20:15:18 +00:00
|
|
|
if (i)
|
2001-07-31 04:03:53 +00:00
|
|
|
object->paging_in_progress -= i;
|
2001-07-04 20:15:18 +00:00
|
|
|
if ((object->flags & OBJ_PIPWNT) && object->paging_in_progress == 0) {
|
|
|
|
vm_object_clear_flag(object, OBJ_PIPWNT);
|
|
|
|
wakeup(object);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vm_object_pip_wait(vm_object_t object, char *waitid)
|
|
|
|
{
|
2003-04-26 18:33:18 +00:00
|
|
|
|
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
|
|
|
while (object->paging_in_progress) {
|
|
|
|
object->flags |= OBJ_PIPWNT;
|
|
|
|
msleep(object, VM_OBJECT_MTX(object), PVM, waitid, 0);
|
|
|
|
}
|
2001-07-04 20:15:18 +00:00
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
* vm_object_allocate_wait
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
* Return a new object with the given size, and give the user the
|
|
|
|
* option of waiting for it to complete or failing if the needed
|
|
|
|
* memory isn't available.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
vm_object_t
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
vm_object_allocate_wait(objtype_t type, vm_pindex_t size, int flags)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_object_t result;
|
|
|
|
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
result = (vm_object_t) uma_zalloc(obj_zone, flags);
|
|
|
|
|
|
|
|
if (result != NULL)
|
|
|
|
_vm_object_allocate(type, size, result);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
return (result);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
/*
|
|
|
|
* vm_object_allocate:
|
|
|
|
*
|
|
|
|
* Returns a new object with the given size.
|
|
|
|
*/
|
|
|
|
vm_object_t
|
|
|
|
vm_object_allocate(objtype_t type, vm_pindex_t size)
|
|
|
|
{
|
2003-02-19 05:47:46 +00:00
|
|
|
return(vm_object_allocate_wait(type, size, M_WAITOK));
|
At long last, commit the zero copy sockets code.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* vm_object_reference:
|
|
|
|
*
|
2003-05-01 03:29:20 +00:00
|
|
|
* Gets another reference to the given object. Note: OBJ_DEAD
|
|
|
|
* objects can be referenced during final cleaning.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1996-08-21 21:56:23 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_reference(vm_object_t object)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
2003-09-15 05:58:27 +00:00
|
|
|
struct vnode *vp;
|
|
|
|
int flags;
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
if (object == NULL)
|
|
|
|
return;
|
2003-05-01 03:29:20 +00:00
|
|
|
VM_OBJECT_LOCK(object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
object->ref_count++;
|
1998-01-17 09:17:02 +00:00
|
|
|
if (object->type == OBJT_VNODE) {
|
2003-09-15 05:58:27 +00:00
|
|
|
vp = object->handle;
|
|
|
|
VI_LOCK(vp);
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
for (flags = LK_INTERLOCK; vget(vp, flags, curthread);
|
|
|
|
flags = 0)
|
|
|
|
printf("vm_object_reference: delay in vget\n");
|
|
|
|
} else
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
}
|
|
|
|
|
2003-11-02 21:30:10 +00:00
|
|
|
/*
|
|
|
|
* vm_object_reference_locked:
|
|
|
|
*
|
|
|
|
* Gets another reference to the given object.
|
|
|
|
*
|
|
|
|
* The object must be locked.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
vm_object_reference_locked(vm_object_t object)
|
|
|
|
{
|
|
|
|
struct vnode *vp;
|
|
|
|
|
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
|
|
|
KASSERT((object->flags & OBJ_DEAD) == 0,
|
|
|
|
("vm_object_reference_locked: dead object referenced"));
|
|
|
|
object->ref_count++;
|
|
|
|
if (object->type == OBJT_VNODE) {
|
|
|
|
vp = object->handle;
|
|
|
|
vref(vp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2001-05-19 01:28:09 +00:00
|
|
|
/*
|
2003-01-01 18:49:04 +00:00
|
|
|
* Handle deallocating an object of type OBJT_VNODE.
|
2001-05-19 01:28:09 +00:00
|
|
|
*/
|
1998-01-07 03:12:19 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_vndeallocate(vm_object_t object)
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
{
|
|
|
|
struct vnode *vp = (struct vnode *) object->handle;
|
1999-01-10 01:58:29 +00:00
|
|
|
|
2001-07-04 16:20:28 +00:00
|
|
|
GIANT_REQUIRED;
|
2003-05-03 20:28:26 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
1999-01-08 17:31:30 +00:00
|
|
|
KASSERT(object->type == OBJT_VNODE,
|
1999-01-10 01:58:29 +00:00
|
|
|
("vm_object_vndeallocate: not a vnode object"));
|
|
|
|
KASSERT(vp != NULL, ("vm_object_vndeallocate: missing vp"));
|
|
|
|
#ifdef INVARIANTS
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (object->ref_count == 0) {
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
vprint("vm_object_vndeallocate", vp);
|
|
|
|
panic("vm_object_vndeallocate: bad object reference count");
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
}
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
object->ref_count--;
|
1998-01-17 09:17:02 +00:00
|
|
|
if (object->ref_count == 0) {
|
2002-08-04 10:29:36 +00:00
|
|
|
mp_fixme("Unlocked vflag access.");
|
|
|
|
vp->v_vflag &= ~VV_TEXT;
|
1997-12-29 00:25:11 +00:00
|
|
|
}
|
2003-05-03 20:28:26 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
2001-05-19 01:28:09 +00:00
|
|
|
/*
|
|
|
|
* vrele may need a vop lock
|
|
|
|
*/
|
1998-01-17 09:17:02 +00:00
|
|
|
vrele(vp);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vm_object_deallocate:
|
|
|
|
*
|
|
|
|
* Release a reference to the specified object,
|
|
|
|
* gained either through a vm_object_allocate
|
|
|
|
* or a vm_object_reference call. When all references
|
|
|
|
* are gone, storage associated with this object
|
|
|
|
* may be relinquished.
|
|
|
|
*
|
|
|
|
* No object may be locked.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_deallocate(vm_object_t object)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
vm_object_t temp;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-06-04 06:00:55 +00:00
|
|
|
if (object != kmem_object)
|
|
|
|
mtx_lock(&Giant);
|
1994-05-24 10:09:53 +00:00
|
|
|
while (object != NULL) {
|
2003-06-04 06:00:55 +00:00
|
|
|
VM_OBJECT_LOCK(object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
if (object->type == OBJT_VNODE) {
|
|
|
|
vm_object_vndeallocate(object);
|
2003-06-04 06:00:55 +00:00
|
|
|
goto done;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
}
|
|
|
|
|
2001-03-04 20:25:23 +00:00
|
|
|
KASSERT(object->ref_count != 0,
|
|
|
|
("vm_object_deallocate: object deallocated too many times: %d", object->type));
|
1997-12-29 00:25:11 +00:00
|
|
|
|
|
|
|
/*
|
2001-03-04 20:25:23 +00:00
|
|
|
* If the reference count goes to 0 we start calling
|
|
|
|
* vm_object_terminate() on the object chain.
|
|
|
|
* A ref count of 1 may be a special case depending on the
|
|
|
|
* shadow count being 0 or 1.
|
1997-12-29 00:25:11 +00:00
|
|
|
*/
|
2001-03-04 20:25:23 +00:00
|
|
|
object->ref_count--;
|
|
|
|
if (object->ref_count > 1) {
|
2003-06-04 06:00:55 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
goto done;
|
2001-03-04 20:25:23 +00:00
|
|
|
} else if (object->ref_count == 1) {
|
|
|
|
if (object->shadow_count == 0) {
|
|
|
|
vm_object_set_flag(object, OBJ_ONEMAPPING);
|
|
|
|
} else if ((object->shadow_count == 1) &&
|
|
|
|
(object->handle == NULL) &&
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
(object->type == OBJT_DEFAULT ||
|
|
|
|
object->type == OBJT_SWAP)) {
|
1995-02-02 09:09:15 +00:00
|
|
|
vm_object_t robject;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
2003-05-18 04:10:16 +00:00
|
|
|
robject = LIST_FIRST(&object->shadow_head);
|
1999-01-08 17:31:30 +00:00
|
|
|
KASSERT(robject != NULL,
|
1999-01-10 01:58:29 +00:00
|
|
|
("vm_object_deallocate: ref_count: %d, shadow_count: %d",
|
1999-01-08 17:31:30 +00:00
|
|
|
object->ref_count,
|
|
|
|
object->shadow_count));
|
2003-06-04 21:07:42 +00:00
|
|
|
if (!VM_OBJECT_TRYLOCK(robject)) {
|
|
|
|
/*
|
|
|
|
* Avoid a potential deadlock.
|
|
|
|
*/
|
|
|
|
object->ref_count++;
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
continue;
|
|
|
|
}
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
if ((robject->handle == NULL) &&
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
(robject->type == OBJT_DEFAULT ||
|
|
|
|
robject->type == OBJT_SWAP)) {
|
1995-02-02 09:09:15 +00:00
|
|
|
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
robject->ref_count++;
|
2003-06-08 23:01:24 +00:00
|
|
|
retry:
|
|
|
|
if (robject->paging_in_progress) {
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
vm_object_pip_wait(robject,
|
|
|
|
"objde1");
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
goto retry;
|
|
|
|
} else if (object->paging_in_progress) {
|
|
|
|
VM_OBJECT_UNLOCK(robject);
|
|
|
|
object->flags |= OBJ_PIPWNT;
|
|
|
|
msleep(object,
|
|
|
|
VM_OBJECT_MTX(object),
|
|
|
|
PDROP | PVM, "objde2", 0);
|
|
|
|
VM_OBJECT_LOCK(robject);
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
goto retry;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
}
|
2003-06-04 06:00:55 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
1999-01-21 08:29:12 +00:00
|
|
|
if (robject->ref_count == 1) {
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
robject->ref_count--;
|
1995-02-20 14:21:58 +00:00
|
|
|
object = robject;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
goto doterm;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
}
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
object = robject;
|
|
|
|
vm_object_collapse(object);
|
2003-06-07 02:29:17 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
continue;
|
1995-01-05 04:30:40 +00:00
|
|
|
}
|
2003-06-04 21:07:42 +00:00
|
|
|
VM_OBJECT_UNLOCK(robject);
|
1995-01-05 04:30:40 +00:00
|
|
|
}
|
2003-06-04 06:00:55 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
goto done;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
}
|
|
|
|
doterm:
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
temp = object->backing_object;
|
2003-04-27 20:07:57 +00:00
|
|
|
if (temp != NULL) {
|
|
|
|
VM_OBJECT_LOCK(temp);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_REMOVE(object, shadow_list);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
temp->shadow_count--;
|
1998-01-31 11:56:53 +00:00
|
|
|
temp->generation++;
|
2003-04-27 20:07:57 +00:00
|
|
|
VM_OBJECT_UNLOCK(temp);
|
1998-02-05 03:32:49 +00:00
|
|
|
object->backing_object = NULL;
|
1996-03-02 02:54:24 +00:00
|
|
|
}
|
2001-10-26 00:08:05 +00:00
|
|
|
/*
|
|
|
|
* Don't double-terminate, we could be in a termination
|
|
|
|
* recursion due to the terminate having to sync data
|
|
|
|
* to disk.
|
|
|
|
*/
|
|
|
|
if ((object->flags & OBJ_DEAD) == 0)
|
|
|
|
vm_object_terminate(object);
|
2003-04-26 19:36:19 +00:00
|
|
|
else
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
1994-05-24 10:09:53 +00:00
|
|
|
object = temp;
|
|
|
|
}
|
2003-06-04 06:00:55 +00:00
|
|
|
done:
|
|
|
|
if (object != kmem_object)
|
|
|
|
mtx_unlock(&Giant);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vm_object_terminate actually destroys the specified object, freeing
|
|
|
|
* up all previously used resources.
|
|
|
|
*
|
|
|
|
* The object must be locked.
|
1999-01-21 08:29:12 +00:00
|
|
|
* This routine may block.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_terminate(vm_object_t object)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_page_t p;
|
1998-10-27 13:22:51 +00:00
|
|
|
int s;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-04-26 19:36:19 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-07-04 16:20:28 +00:00
|
|
|
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
/*
|
|
|
|
* Make sure no one uses us.
|
|
|
|
*/
|
1998-08-24 08:39:39 +00:00
|
|
|
vm_object_set_flag(object, OBJ_DEAD);
|
1997-06-22 03:00:24 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
1995-04-09 06:03:56 +00:00
|
|
|
* wait for the pageout daemon to be done with the object
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1998-02-25 03:56:15 +00:00
|
|
|
vm_object_pip_wait(object, "objtrm");
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1999-01-08 17:31:30 +00:00
|
|
|
KASSERT(!object->paging_in_progress,
|
|
|
|
("vm_object_terminate: pageout in progress"));
|
1994-05-25 09:21:21 +00:00
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Clean and free the pages, as appropriate. All references to the
|
|
|
|
* object are gone, so we don't need to lock it.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (object->type == OBJT_VNODE) {
|
2003-05-04 19:23:40 +00:00
|
|
|
struct vnode *vp = (struct vnode *)object->handle;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Clean pages and flush buffers.
|
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
vm_object_page_clean(object, 0, 0, OBJPC_SYNC);
|
2003-04-24 04:31:25 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
1995-04-09 06:03:56 +00:00
|
|
|
vinvalbuf(vp, V_SAVE, NOCRED, NULL, 0, 0);
|
2003-05-04 19:23:40 +00:00
|
|
|
|
|
|
|
VM_OBJECT_LOCK(object);
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
}
|
|
|
|
|
2001-04-13 11:15:40 +00:00
|
|
|
KASSERT(object->ref_count == 0,
|
|
|
|
("vm_object_terminate: object with references, ref_count=%d",
|
|
|
|
object->ref_count));
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
1998-10-23 05:25:49 +00:00
|
|
|
/*
|
|
|
|
* Now free any remaining pages. For internal objects, this also
|
|
|
|
* removes them from paging queues. Don't free wired pages, just
|
1999-01-21 08:29:12 +00:00
|
|
|
* remove them from the object.
|
1998-10-22 02:16:53 +00:00
|
|
|
*/
|
1998-10-27 13:22:51 +00:00
|
|
|
s = splvm();
|
2002-07-09 18:02:03 +00:00
|
|
|
vm_page_lock_queues();
|
1998-10-22 02:16:53 +00:00
|
|
|
while ((p = TAILQ_FIRST(&object->memq)) != NULL) {
|
2001-04-13 11:15:40 +00:00
|
|
|
KASSERT(!p->busy && (p->flags & PG_BUSY) == 0,
|
|
|
|
("vm_object_terminate: freeing busy page %p "
|
|
|
|
"p->busy = %d, p->flags %x\n", p, p->busy, p->flags));
|
1998-10-22 02:16:53 +00:00
|
|
|
if (p->wire_count == 0) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_busy(p);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
vm_page_free(p);
|
|
|
|
cnt.v_pfree++;
|
1998-10-22 02:16:53 +00:00
|
|
|
} else {
|
1998-10-23 05:25:49 +00:00
|
|
|
vm_page_busy(p);
|
1998-10-22 02:16:53 +00:00
|
|
|
vm_page_remove(p);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
}
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
}
|
2002-07-09 18:02:03 +00:00
|
|
|
vm_page_unlock_queues();
|
1998-10-27 13:22:51 +00:00
|
|
|
splx(s);
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
|
1998-10-23 05:43:13 +00:00
|
|
|
/*
|
|
|
|
* Let the pager know object is dead.
|
|
|
|
*/
|
|
|
|
vm_pager_deallocate(object);
|
2003-05-06 02:45:28 +00:00
|
|
|
VM_OBJECT_UNLOCK(object);
|
1998-10-23 05:43:13 +00:00
|
|
|
|
1998-10-22 02:16:53 +00:00
|
|
|
/*
|
|
|
|
* Remove the object from the global object list.
|
|
|
|
*/
|
Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
|
|
|
mtx_lock(&vm_object_list_mtx);
|
1998-10-22 02:16:53 +00:00
|
|
|
TAILQ_REMOVE(&vm_object_list, object, object_list);
|
Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
|
|
|
mtx_unlock(&vm_object_list_mtx);
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
|
1998-10-22 02:16:53 +00:00
|
|
|
wakeup(object);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Free the space for the object.
|
|
|
|
*/
|
2002-03-20 04:02:59 +00:00
|
|
|
uma_zfree(obj_zone, object);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
|
|
|
* vm_object_page_clean
|
|
|
|
*
|
1999-12-12 03:19:33 +00:00
|
|
|
* Clean all dirty pages in the specified range of object. Leaves page
|
|
|
|
* on whatever queue it is currently on. If NOSYNC is set then do not
|
|
|
|
* write out pages with PG_NOSYNC set (originally comes from MAP_NOSYNC),
|
|
|
|
* leaving the object dirty.
|
1994-05-25 09:21:21 +00:00
|
|
|
*
|
2002-12-28 21:03:42 +00:00
|
|
|
* When stuffing pages asynchronously, allow clustering. XXX we need a
|
|
|
|
* synchronous clustering mode implementation.
|
|
|
|
*
|
1994-05-25 09:21:21 +00:00
|
|
|
* Odd semantics: if start == end, we clean everything.
|
|
|
|
*
|
|
|
|
* The object must be locked.
|
|
|
|
*/
|
1995-03-22 12:24:11 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_page_clean(vm_object_t object, vm_pindex_t start, vm_pindex_t end, int flags)
|
1994-05-25 09:21:21 +00:00
|
|
|
{
|
2002-03-06 02:42:56 +00:00
|
|
|
vm_page_t p, np;
|
2002-06-25 22:14:06 +00:00
|
|
|
vm_pindex_t tstart, tend;
|
1996-01-19 04:00:31 +00:00
|
|
|
vm_pindex_t pi;
|
1999-12-12 03:19:33 +00:00
|
|
|
int clearobjflags;
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
int pagerflags;
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
int curgeneration;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
2001-07-04 16:20:28 +00:00
|
|
|
GIANT_REQUIRED;
|
2003-04-24 04:31:25 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
1995-11-05 20:46:03 +00:00
|
|
|
if (object->type != OBJT_VNODE ||
|
|
|
|
(object->flags & OBJ_MIGHTBEDIRTY) == 0)
|
1995-03-23 05:19:44 +00:00
|
|
|
return;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
2002-12-28 21:03:42 +00:00
|
|
|
pagerflags = (flags & (OBJPC_SYNC | OBJPC_INVAL)) ? VM_PAGER_PUT_SYNC : VM_PAGER_CLUSTER_OK;
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
pagerflags |= (flags & OBJPC_INVAL) ? VM_PAGER_PUT_INVAL : 0;
|
|
|
|
|
1998-08-24 08:39:39 +00:00
|
|
|
vm_object_set_flag(object, OBJ_CLEANING);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
|
1995-04-09 06:03:56 +00:00
|
|
|
tstart = start;
|
|
|
|
if (end == 0) {
|
|
|
|
tend = object->size;
|
|
|
|
} else {
|
|
|
|
tend = end;
|
|
|
|
}
|
1998-01-31 11:56:53 +00:00
|
|
|
|
2002-12-27 20:16:13 +00:00
|
|
|
vm_page_lock_queues();
|
2002-03-06 02:42:56 +00:00
|
|
|
/*
|
|
|
|
* If the caller is smart and only msync()s a range he knows is
|
|
|
|
* dirty, we may be able to avoid an object scan. This results in
|
|
|
|
* a phenominal improvement in performance. We cannot do this
|
|
|
|
* as a matter of course because the object may be huge - e.g.
|
|
|
|
* the size might be in the gigabytes or terrabytes.
|
|
|
|
*/
|
|
|
|
if (msync_flush_flags & MSYNC_FLUSH_HARDSEQ) {
|
2002-06-29 20:04:38 +00:00
|
|
|
vm_pindex_t tscan;
|
2002-03-06 02:42:56 +00:00
|
|
|
int scanlimit;
|
|
|
|
int scanreset;
|
|
|
|
|
|
|
|
scanreset = object->resident_page_count / EASY_SCAN_FACTOR;
|
|
|
|
if (scanreset < 16)
|
|
|
|
scanreset = 16;
|
2002-12-28 21:03:42 +00:00
|
|
|
pagerflags |= VM_PAGER_IGNORE_CLEANCHK;
|
2002-03-06 02:42:56 +00:00
|
|
|
|
|
|
|
scanlimit = scanreset;
|
|
|
|
tscan = tstart;
|
|
|
|
while (tscan < tend) {
|
|
|
|
curgeneration = object->generation;
|
|
|
|
p = vm_page_lookup(object, tscan);
|
|
|
|
if (p == NULL || p->valid == 0 ||
|
|
|
|
(p->queue - p->pc) == PQ_CACHE) {
|
|
|
|
if (--scanlimit == 0)
|
|
|
|
break;
|
|
|
|
++tscan;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
vm_page_test_dirty(p);
|
|
|
|
if ((p->dirty & p->valid) == 0) {
|
|
|
|
if (--scanlimit == 0)
|
|
|
|
break;
|
|
|
|
++tscan;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* If we have been asked to skip nosync pages and
|
|
|
|
* this is a nosync page, we can't continue.
|
|
|
|
*/
|
|
|
|
if ((flags & OBJPC_NOSYNC) && (p->flags & PG_NOSYNC)) {
|
|
|
|
if (--scanlimit == 0)
|
|
|
|
break;
|
|
|
|
++tscan;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
scanlimit = scanreset;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This returns 0 if it was unable to busy the first
|
|
|
|
* page (i.e. had to sleep).
|
|
|
|
*/
|
|
|
|
tscan += vm_object_page_collect_flush(object, p, curgeneration, pagerflags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If everything was dirty and we flushed it successfully,
|
|
|
|
* and the requested range is not the entire object, we
|
|
|
|
* don't have to mess with CLEANCHK or MIGHTBEDIRTY and can
|
|
|
|
* return immediately.
|
|
|
|
*/
|
|
|
|
if (tscan >= tend && (tstart || tend < object->size)) {
|
2002-12-27 20:16:13 +00:00
|
|
|
vm_page_unlock_queues();
|
2002-03-06 02:42:56 +00:00
|
|
|
vm_object_clear_flag(object, OBJ_CLEANING);
|
|
|
|
return;
|
|
|
|
}
|
2002-12-28 21:03:42 +00:00
|
|
|
pagerflags &= ~VM_PAGER_IGNORE_CLEANCHK;
|
2002-03-06 02:42:56 +00:00
|
|
|
}
|
|
|
|
|
1999-12-12 03:19:33 +00:00
|
|
|
/*
|
|
|
|
* Generally set CLEANCHK interlock and make the page read-only so
|
|
|
|
* we can then clear the object flags.
|
|
|
|
*
|
|
|
|
* However, if this is a nosync mmap then the object is likely to
|
|
|
|
* stay dirty so do not mess with the page and do not clear the
|
|
|
|
* object flags.
|
|
|
|
*/
|
|
|
|
clearobjflags = 1;
|
2001-02-04 13:13:25 +00:00
|
|
|
TAILQ_FOREACH(p, &object->memq, listq) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_set(p, PG_CLEANCHK);
|
1999-12-12 03:19:33 +00:00
|
|
|
if ((flags & OBJPC_NOSYNC) && (p->flags & PG_NOSYNC))
|
|
|
|
clearobjflags = 0;
|
|
|
|
else
|
2002-11-18 04:05:22 +00:00
|
|
|
pmap_page_protect(p, VM_PROT_READ);
|
1998-01-31 11:56:53 +00:00
|
|
|
}
|
|
|
|
|
1999-12-12 03:19:33 +00:00
|
|
|
if (clearobjflags && (tstart == 0) && (tend == object->size)) {
|
2001-10-26 00:08:05 +00:00
|
|
|
struct vnode *vp;
|
|
|
|
|
1998-08-24 08:39:39 +00:00
|
|
|
vm_object_clear_flag(object, OBJ_WRITEABLE|OBJ_MIGHTBEDIRTY);
|
2001-10-26 00:08:05 +00:00
|
|
|
if (object->type == OBJT_VNODE &&
|
|
|
|
(vp = (struct vnode *)object->handle) != NULL) {
|
2002-08-04 10:29:36 +00:00
|
|
|
VI_LOCK(vp);
|
|
|
|
if (vp->v_iflag & VI_OBJDIRTY)
|
|
|
|
vp->v_iflag &= ~VI_OBJDIRTY;
|
|
|
|
VI_UNLOCK(vp);
|
2001-10-26 00:08:05 +00:00
|
|
|
}
|
1995-04-16 03:11:28 +00:00
|
|
|
}
|
1996-01-19 04:00:31 +00:00
|
|
|
|
|
|
|
rescan:
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
curgeneration = object->generation;
|
|
|
|
|
2001-07-04 19:00:13 +00:00
|
|
|
for (p = TAILQ_FIRST(&object->memq); p; p = np) {
|
2002-03-06 02:42:56 +00:00
|
|
|
int n;
|
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
np = TAILQ_NEXT(p, listq);
|
1996-01-19 04:00:31 +00:00
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
again:
|
1996-01-19 04:00:31 +00:00
|
|
|
pi = p->pindex;
|
|
|
|
if (((p->flags & PG_CLEANCHK) == 0) ||
|
|
|
|
(pi < tstart) || (pi >= tend) ||
|
1996-09-08 20:44:49 +00:00
|
|
|
(p->valid == 0) ||
|
|
|
|
((p->queue - p->pc) == PQ_CACHE)) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(p, PG_CLEANCHK);
|
1995-11-05 20:46:03 +00:00
|
|
|
continue;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
1996-01-19 04:00:31 +00:00
|
|
|
|
|
|
|
vm_page_test_dirty(p);
|
|
|
|
if ((p->dirty & p->valid) == 0) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(p, PG_CLEANCHK);
|
1995-11-05 20:46:03 +00:00
|
|
|
continue;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
|
|
|
|
1999-12-12 03:19:33 +00:00
|
|
|
/*
|
|
|
|
* If we have been asked to skip nosync pages and this is a
|
|
|
|
* nosync page, skip it. Note that the object flags were
|
|
|
|
* not cleared in this case so we do not have to set them.
|
|
|
|
*/
|
|
|
|
if ((flags & OBJPC_NOSYNC) && (p->flags & PG_NOSYNC)) {
|
|
|
|
vm_page_flag_clear(p, PG_CLEANCHK);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
n = vm_object_page_collect_flush(object, p,
|
|
|
|
curgeneration, pagerflags);
|
|
|
|
if (n == 0)
|
|
|
|
goto rescan;
|
|
|
|
|
|
|
|
if (object->generation != curgeneration)
|
|
|
|
goto rescan;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to optimize the next page. If we can't we pick up
|
|
|
|
* our (random) scan where we left off.
|
|
|
|
*/
|
|
|
|
if (msync_flush_flags & MSYNC_FLUSH_SOFTSEQ) {
|
|
|
|
if ((p = vm_page_lookup(object, pi + n)) != NULL)
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
}
|
2002-12-27 20:16:13 +00:00
|
|
|
vm_page_unlock_queues();
|
2002-03-06 02:42:56 +00:00
|
|
|
#if 0
|
|
|
|
VOP_FSYNC(vp, NULL, (pagerflags & VM_PAGER_PUT_SYNC)?MNT_WAIT:0, curproc);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
vm_object_clear_flag(object, OBJ_CLEANING);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
vm_object_page_collect_flush(vm_object_t object, vm_page_t p, int curgeneration, int pagerflags)
|
|
|
|
{
|
|
|
|
int runlen;
|
|
|
|
int s;
|
|
|
|
int maxf;
|
|
|
|
int chkb;
|
|
|
|
int maxb;
|
|
|
|
int i;
|
|
|
|
vm_pindex_t pi;
|
|
|
|
vm_page_t maf[vm_pageout_page_count];
|
|
|
|
vm_page_t mab[vm_pageout_page_count];
|
|
|
|
vm_page_t ma[vm_pageout_page_count];
|
|
|
|
|
|
|
|
s = splvm();
|
2002-12-27 20:16:13 +00:00
|
|
|
mtx_assert(&vm_page_queue_mtx, MA_OWNED);
|
2002-03-06 02:42:56 +00:00
|
|
|
pi = p->pindex;
|
2002-12-18 04:39:15 +00:00
|
|
|
while (vm_page_sleep_if_busy(p, TRUE, "vpcwai")) {
|
2002-12-27 20:16:13 +00:00
|
|
|
vm_page_lock_queues();
|
2002-03-06 02:42:56 +00:00
|
|
|
if (object->generation != curgeneration) {
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
maxf = 0;
|
|
|
|
for(i = 1; i < vm_pageout_page_count; i++) {
|
|
|
|
vm_page_t tp;
|
|
|
|
|
|
|
|
if ((tp = vm_page_lookup(object, pi + i)) != NULL) {
|
|
|
|
if ((tp->flags & PG_BUSY) ||
|
2002-12-28 21:03:42 +00:00
|
|
|
((pagerflags & VM_PAGER_IGNORE_CLEANCHK) == 0 &&
|
|
|
|
(tp->flags & PG_CLEANCHK) == 0) ||
|
2002-03-06 02:42:56 +00:00
|
|
|
(tp->busy != 0))
|
|
|
|
break;
|
|
|
|
if((tp->queue - tp->pc) == PQ_CACHE) {
|
|
|
|
vm_page_flag_clear(tp, PG_CLEANCHK);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
vm_page_test_dirty(tp);
|
|
|
|
if ((tp->dirty & tp->valid) == 0) {
|
|
|
|
vm_page_flag_clear(tp, PG_CLEANCHK);
|
|
|
|
break;
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
}
|
2002-03-06 02:42:56 +00:00
|
|
|
maf[ i - 1 ] = tp;
|
|
|
|
maxf++;
|
|
|
|
continue;
|
1995-11-05 20:46:03 +00:00
|
|
|
}
|
2002-03-06 02:42:56 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
maxb = 0;
|
|
|
|
chkb = vm_pageout_page_count - maxf;
|
|
|
|
if (chkb) {
|
|
|
|
for(i = 1; i < chkb;i++) {
|
|
|
|
vm_page_t tp;
|
1998-01-31 11:56:53 +00:00
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
if ((tp = vm_page_lookup(object, pi - i)) != NULL) {
|
1996-01-19 04:00:31 +00:00
|
|
|
if ((tp->flags & PG_BUSY) ||
|
2002-12-28 21:03:42 +00:00
|
|
|
((pagerflags & VM_PAGER_IGNORE_CLEANCHK) == 0 &&
|
|
|
|
(tp->flags & PG_CLEANCHK) == 0) ||
|
1998-03-01 04:18:54 +00:00
|
|
|
(tp->busy != 0))
|
1996-01-19 04:00:31 +00:00
|
|
|
break;
|
2002-03-10 21:52:48 +00:00
|
|
|
if ((tp->queue - tp->pc) == PQ_CACHE) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(tp, PG_CLEANCHK);
|
1996-05-24 05:17:21 +00:00
|
|
|
break;
|
|
|
|
}
|
1996-01-19 04:00:31 +00:00
|
|
|
vm_page_test_dirty(tp);
|
|
|
|
if ((tp->dirty & tp->valid) == 0) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(tp, PG_CLEANCHK);
|
1996-01-19 04:00:31 +00:00
|
|
|
break;
|
|
|
|
}
|
2002-03-06 02:42:56 +00:00
|
|
|
mab[ i - 1 ] = tp;
|
|
|
|
maxb++;
|
1996-01-19 04:00:31 +00:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
2002-03-06 02:42:56 +00:00
|
|
|
}
|
1995-04-09 06:03:56 +00:00
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
for(i = 0; i < maxb; i++) {
|
|
|
|
int index = (maxb - i) - 1;
|
|
|
|
ma[index] = mab[i];
|
|
|
|
vm_page_flag_clear(ma[index], PG_CLEANCHK);
|
|
|
|
}
|
|
|
|
vm_page_flag_clear(p, PG_CLEANCHK);
|
|
|
|
ma[maxb] = p;
|
|
|
|
for(i = 0; i < maxf; i++) {
|
|
|
|
int index = (maxb + i) + 1;
|
|
|
|
ma[index] = maf[i];
|
|
|
|
vm_page_flag_clear(ma[index], PG_CLEANCHK);
|
|
|
|
}
|
|
|
|
runlen = maxb + maxf + 1;
|
1998-05-21 07:47:58 +00:00
|
|
|
|
2002-03-06 02:42:56 +00:00
|
|
|
splx(s);
|
2003-10-18 21:09:21 +00:00
|
|
|
vm_pageout_flush(ma, runlen, pagerflags);
|
2002-03-06 02:42:56 +00:00
|
|
|
for (i = 0; i < runlen; i++) {
|
|
|
|
if (ma[i]->valid & ma[i]->dirty) {
|
2002-11-18 04:05:22 +00:00
|
|
|
pmap_page_protect(ma[i], VM_PROT_READ);
|
2002-03-06 02:42:56 +00:00
|
|
|
vm_page_flag_set(ma[i], PG_CLEANCHK);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* maxf will end up being the actual number of pages
|
|
|
|
* we wrote out contiguously, non-inclusive of the
|
|
|
|
* first page. We do not count look-behind pages.
|
|
|
|
*/
|
|
|
|
if (i >= maxb + 1 && (maxf > i - maxb - 1))
|
|
|
|
maxf = i - maxb - 1;
|
1998-05-21 07:47:58 +00:00
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
2002-03-06 02:42:56 +00:00
|
|
|
return(maxf + 1);
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
|
|
|
|
2003-11-09 05:25:35 +00:00
|
|
|
/*
|
|
|
|
* Note that there is absolutely no sense in writing out
|
|
|
|
* anonymous objects, so we track down the vnode object
|
|
|
|
* to write out.
|
|
|
|
* We invalidate (remove) all pages from the address space
|
|
|
|
* for semantic correctness.
|
|
|
|
*
|
|
|
|
* Note: certain anonymous maps, such as MAP_NOSYNC maps,
|
|
|
|
* may start out with a NULL object.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
vm_object_sync(vm_object_t object, vm_ooffset_t offset, vm_size_t size,
|
|
|
|
boolean_t syncio, boolean_t invalidate)
|
|
|
|
{
|
|
|
|
vm_object_t backing_object;
|
|
|
|
struct vnode *vp;
|
|
|
|
int flags;
|
|
|
|
|
|
|
|
if (object == NULL)
|
|
|
|
return;
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
while ((backing_object = object->backing_object) != NULL) {
|
|
|
|
VM_OBJECT_LOCK(backing_object);
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
object = backing_object;
|
|
|
|
offset += object->backing_object_offset;
|
|
|
|
if (object->size < OFF_TO_IDX(offset + size))
|
|
|
|
size = IDX_TO_OFF(object->size) - offset;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Flush pages if writing is allowed, invalidate them
|
|
|
|
* if invalidation requested. Pages undergoing I/O
|
|
|
|
* will be ignored by vm_object_page_remove().
|
|
|
|
*
|
|
|
|
* We cannot lock the vnode and then wait for paging
|
|
|
|
* to complete without deadlocking against vm_fault.
|
|
|
|
* Instead we simply call vm_object_page_remove() and
|
|
|
|
* allow it to block internally on a page-by-page
|
|
|
|
* basis when it encounters pages undergoing async
|
|
|
|
* I/O.
|
|
|
|
*/
|
|
|
|
if (object->type == OBJT_VNODE &&
|
|
|
|
(object->flags & OBJ_MIGHTBEDIRTY) != 0) {
|
|
|
|
vp = object->handle;
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
mtx_lock(&Giant);
|
|
|
|
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, curthread);
|
|
|
|
flags = (syncio || invalidate) ? OBJPC_SYNC : 0;
|
|
|
|
flags |= invalidate ? OBJPC_INVAL : 0;
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
vm_object_page_clean(object,
|
|
|
|
OFF_TO_IDX(offset),
|
|
|
|
OFF_TO_IDX(offset + size + PAGE_MASK),
|
|
|
|
flags);
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
VOP_UNLOCK(vp, 0, curthread);
|
|
|
|
mtx_unlock(&Giant);
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
}
|
|
|
|
if ((object->type == OBJT_VNODE ||
|
|
|
|
object->type == OBJT_DEVICE) && invalidate) {
|
|
|
|
vm_object_page_remove(object,
|
|
|
|
OFF_TO_IDX(offset),
|
|
|
|
OFF_TO_IDX(offset + size + PAGE_MASK),
|
|
|
|
FALSE);
|
|
|
|
}
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
}
|
|
|
|
|
1996-05-19 07:36:50 +00:00
|
|
|
/*
|
|
|
|
* vm_object_madvise:
|
|
|
|
*
|
|
|
|
* Implements the madvise function at the object/page level.
|
1999-01-21 08:29:12 +00:00
|
|
|
*
|
1999-08-12 08:22:57 +00:00
|
|
|
* MADV_WILLNEED (any object)
|
|
|
|
*
|
|
|
|
* Activate the specified pages if they are resident.
|
|
|
|
*
|
|
|
|
* MADV_DONTNEED (any object)
|
|
|
|
*
|
|
|
|
* Deactivate the specified pages if they are resident.
|
|
|
|
*
|
|
|
|
* MADV_FREE (OBJT_DEFAULT/OBJT_SWAP objects,
|
|
|
|
* OBJ_ONEMAPPING only)
|
|
|
|
*
|
|
|
|
* Deactivate and clean the specified pages if they are
|
|
|
|
* resident. This permits the process to reuse the pages
|
|
|
|
* without faulting or the kernel to reclaim the pages
|
|
|
|
* without I/O.
|
1996-05-19 07:36:50 +00:00
|
|
|
*/
|
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_madvise(vm_object_t object, vm_pindex_t pindex, int count, int advise)
|
1996-05-19 07:36:50 +00:00
|
|
|
{
|
1997-01-20 02:25:14 +00:00
|
|
|
vm_pindex_t end, tpindex;
|
2003-05-31 19:40:57 +00:00
|
|
|
vm_object_t backing_object, tobject;
|
1996-05-19 07:36:50 +00:00
|
|
|
vm_page_t m;
|
|
|
|
|
|
|
|
if (object == NULL)
|
|
|
|
return;
|
|
|
|
end = pindex + count;
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
* Locate and adjust resident pages
|
|
|
|
*/
|
|
|
|
for (; pindex < end; pindex += 1) {
|
1997-01-20 02:25:14 +00:00
|
|
|
relookup:
|
|
|
|
tobject = object;
|
|
|
|
tpindex = pindex;
|
2003-05-31 19:40:57 +00:00
|
|
|
VM_OBJECT_LOCK(tobject);
|
1997-01-20 02:25:14 +00:00
|
|
|
shadowlookup:
|
1999-08-12 06:33:56 +00:00
|
|
|
/*
|
|
|
|
* MADV_FREE only operates on OBJT_DEFAULT or OBJT_SWAP pages
|
|
|
|
* and those pages must be OBJ_ONEMAPPING.
|
|
|
|
*/
|
|
|
|
if (advise == MADV_FREE) {
|
|
|
|
if ((tobject->type != OBJT_DEFAULT &&
|
|
|
|
tobject->type != OBJT_SWAP) ||
|
|
|
|
(tobject->flags & OBJ_ONEMAPPING) == 0) {
|
2003-05-31 19:40:57 +00:00
|
|
|
goto unlock_tobject;
|
1999-08-12 06:33:56 +00:00
|
|
|
}
|
1999-01-21 08:29:12 +00:00
|
|
|
}
|
1997-01-20 02:25:14 +00:00
|
|
|
m = vm_page_lookup(tobject, tpindex);
|
|
|
|
if (m == NULL) {
|
1999-02-15 02:03:40 +00:00
|
|
|
/*
|
|
|
|
* There may be swap even if there is no backing page
|
|
|
|
*/
|
|
|
|
if (advise == MADV_FREE && tobject->type == OBJT_SWAP)
|
|
|
|
swap_pager_freespace(tobject, tpindex, 1);
|
|
|
|
/*
|
|
|
|
* next object
|
|
|
|
*/
|
2003-05-31 19:40:57 +00:00
|
|
|
backing_object = tobject->backing_object;
|
|
|
|
if (backing_object == NULL)
|
|
|
|
goto unlock_tobject;
|
|
|
|
VM_OBJECT_LOCK(backing_object);
|
|
|
|
VM_OBJECT_UNLOCK(tobject);
|
|
|
|
tobject = backing_object;
|
1997-01-20 02:25:14 +00:00
|
|
|
tpindex += OFF_TO_IDX(tobject->backing_object_offset);
|
|
|
|
goto shadowlookup;
|
|
|
|
}
|
1996-05-19 07:36:50 +00:00
|
|
|
/*
|
|
|
|
* If the page is busy or not in a normal active state,
|
2000-05-29 22:40:54 +00:00
|
|
|
* we skip it. If the page is not managed there are no
|
|
|
|
* page queues to mess with. Things can break if we mess
|
|
|
|
* with pages in any of the below states.
|
1996-05-19 07:36:50 +00:00
|
|
|
*/
|
2002-07-30 07:23:04 +00:00
|
|
|
vm_page_lock_queues();
|
|
|
|
if (m->hold_count ||
|
1999-01-21 08:29:12 +00:00
|
|
|
m->wire_count ||
|
2000-05-29 22:40:54 +00:00
|
|
|
(m->flags & PG_UNMANAGED) ||
|
2002-07-30 07:23:04 +00:00
|
|
|
m->valid != VM_PAGE_BITS_ALL) {
|
|
|
|
vm_page_unlock_queues();
|
2003-05-31 19:40:57 +00:00
|
|
|
goto unlock_tobject;
|
1997-01-20 02:25:14 +00:00
|
|
|
}
|
2003-05-31 19:40:57 +00:00
|
|
|
if (vm_page_sleep_if_busy(m, TRUE, "madvpo")) {
|
|
|
|
VM_OBJECT_UNLOCK(tobject);
|
1998-03-01 04:18:54 +00:00
|
|
|
goto relookup;
|
2003-05-31 19:40:57 +00:00
|
|
|
}
|
1996-05-19 07:36:50 +00:00
|
|
|
if (advise == MADV_WILLNEED) {
|
1998-01-31 11:56:53 +00:00
|
|
|
vm_page_activate(m);
|
1997-01-20 02:25:14 +00:00
|
|
|
} else if (advise == MADV_DONTNEED) {
|
1999-09-17 05:48:36 +00:00
|
|
|
vm_page_dontneed(m);
|
1996-05-23 00:45:58 +00:00
|
|
|
} else if (advise == MADV_FREE) {
|
|
|
|
/*
|
1999-02-12 09:51:43 +00:00
|
|
|
* Mark the page clean. This will allow the page
|
|
|
|
* to be freed up by the system. However, such pages
|
|
|
|
* are often reused quickly by malloc()/free()
|
|
|
|
* so we do not do anything that would cause
|
|
|
|
* a page fault if we can help it.
|
|
|
|
*
|
|
|
|
* Specifically, we do not try to actually free
|
|
|
|
* the page now nor do we try to put it in the
|
|
|
|
* cache (which would cause a page fault on reuse).
|
1999-02-12 20:42:19 +00:00
|
|
|
*
|
|
|
|
* But we do make the page is freeable as we
|
|
|
|
* can without actually taking the step of unmapping
|
|
|
|
* it.
|
1996-05-23 00:45:58 +00:00
|
|
|
*/
|
2000-05-21 12:50:18 +00:00
|
|
|
pmap_clear_modify(m);
|
1999-01-21 08:29:12 +00:00
|
|
|
m->dirty = 0;
|
1999-02-12 20:42:19 +00:00
|
|
|
m->act_count = 0;
|
1999-09-17 05:48:36 +00:00
|
|
|
vm_page_dontneed(m);
|
1996-05-19 07:36:50 +00:00
|
|
|
}
|
2002-07-23 04:39:48 +00:00
|
|
|
vm_page_unlock_queues();
|
|
|
|
if (advise == MADV_FREE && tobject->type == OBJT_SWAP)
|
|
|
|
swap_pager_freespace(tobject, tpindex, 1);
|
2003-05-31 19:40:57 +00:00
|
|
|
unlock_tobject:
|
|
|
|
VM_OBJECT_UNLOCK(tobject);
|
1996-05-19 07:36:50 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
|
|
|
* vm_object_shadow:
|
|
|
|
*
|
|
|
|
* Create a new object which is backed by the
|
|
|
|
* specified existing object range. The source
|
|
|
|
* object reference is deallocated.
|
|
|
|
*
|
|
|
|
* The new object and offset into that object
|
|
|
|
* are returned in the source parameters.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_shadow(
|
|
|
|
vm_object_t *object, /* IN/OUT */
|
|
|
|
vm_ooffset_t *offset, /* IN/OUT */
|
|
|
|
vm_size_t length)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_object_t source;
|
|
|
|
vm_object_t result;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
source = *object;
|
|
|
|
|
1999-05-28 03:39:44 +00:00
|
|
|
/*
|
|
|
|
* Don't create the new object if the old object isn't shared.
|
|
|
|
*/
|
2003-04-27 05:43:03 +00:00
|
|
|
if (source != NULL) {
|
|
|
|
VM_OBJECT_LOCK(source);
|
|
|
|
if (source->ref_count == 1 &&
|
|
|
|
source->handle == NULL &&
|
|
|
|
(source->type == OBJT_DEFAULT ||
|
|
|
|
source->type == OBJT_SWAP)) {
|
|
|
|
VM_OBJECT_UNLOCK(source);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
VM_OBJECT_UNLOCK(source);
|
2002-05-31 03:48:55 +00:00
|
|
|
}
|
1999-05-28 03:39:44 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
2003-04-27 05:43:03 +00:00
|
|
|
* Allocate a new object with the given length.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
2001-04-13 11:15:40 +00:00
|
|
|
result = vm_object_allocate(OBJT_DEFAULT, length);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* The new object shadows the source object, adding a reference to it.
|
|
|
|
* Our caller changes his reference to point to the new object,
|
|
|
|
* removing a reference to the source object. Net result: no change
|
|
|
|
* of reference count.
|
1999-02-07 08:44:53 +00:00
|
|
|
*
|
|
|
|
* Try to optimize the result object's page color when shadowing
|
2000-03-26 15:20:23 +00:00
|
|
|
* in order to maintain page coloring consistency in the combined
|
1999-02-07 08:44:53 +00:00
|
|
|
* shadowed object.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
result->backing_object = source;
|
2003-04-27 05:43:03 +00:00
|
|
|
if (source != NULL) {
|
|
|
|
VM_OBJECT_LOCK(source);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_INSERT_HEAD(&source->shadow_head, result, shadow_list);
|
1998-01-31 11:56:53 +00:00
|
|
|
source->shadow_count++;
|
|
|
|
source->generation++;
|
2002-05-06 03:34:17 +00:00
|
|
|
if (length < source->size)
|
|
|
|
length = source->size;
|
|
|
|
if (length > PQ_L2_SIZE / 3 + PQ_PRIME1 ||
|
|
|
|
source->generation > 1)
|
|
|
|
length = PQ_L2_SIZE / 3 + PQ_PRIME1;
|
|
|
|
result->pg_color = (source->pg_color +
|
|
|
|
length * source->generation) & PQ_L2_MASK;
|
2003-04-27 05:43:03 +00:00
|
|
|
VM_OBJECT_UNLOCK(source);
|
2002-05-06 03:34:17 +00:00
|
|
|
next_index = (result->pg_color + PQ_L2_SIZE / 3 + PQ_PRIME1) &
|
|
|
|
PQ_L2_MASK;
|
1996-03-02 02:54:24 +00:00
|
|
|
}
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Store the offset into the source object, and fix up the offset into
|
|
|
|
* the new object.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
result->backing_object_offset = *offset;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Return the new things
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
*offset = 0;
|
|
|
|
*object = result;
|
|
|
|
}
|
|
|
|
|
2002-06-02 23:54:09 +00:00
|
|
|
/*
|
|
|
|
* vm_object_split:
|
|
|
|
*
|
|
|
|
* Split the pages in a map entry into a new object. This affords
|
|
|
|
* easier removal of unused pages, and keeps object inheritance from
|
|
|
|
* being a negative impact on memory usage.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
vm_object_split(vm_map_entry_t entry)
|
|
|
|
{
|
|
|
|
vm_page_t m;
|
|
|
|
vm_object_t orig_object, new_object, source;
|
2002-06-26 20:32:51 +00:00
|
|
|
vm_pindex_t offidxstart, offidxend;
|
|
|
|
vm_size_t idx, size;
|
2002-06-02 23:54:09 +00:00
|
|
|
|
|
|
|
orig_object = entry->object.vm_object;
|
|
|
|
if (orig_object->type != OBJT_DEFAULT && orig_object->type != OBJT_SWAP)
|
|
|
|
return;
|
|
|
|
if (orig_object->ref_count <= 1)
|
|
|
|
return;
|
2003-12-30 22:28:36 +00:00
|
|
|
VM_OBJECT_UNLOCK(orig_object);
|
2002-06-02 23:54:09 +00:00
|
|
|
|
2003-12-30 22:28:36 +00:00
|
|
|
offidxstart = OFF_TO_IDX(entry->offset);
|
|
|
|
offidxend = offidxstart + OFF_TO_IDX(entry->end - entry->start);
|
2002-06-02 23:54:09 +00:00
|
|
|
size = offidxend - offidxstart;
|
|
|
|
|
2003-12-30 22:28:36 +00:00
|
|
|
/*
|
|
|
|
* If swap_pager_copy() is later called, it will convert new_object
|
|
|
|
* into a swap object.
|
|
|
|
*/
|
|
|
|
new_object = vm_object_allocate(OBJT_DEFAULT, size);
|
2002-06-02 23:54:09 +00:00
|
|
|
|
2003-11-02 22:52:42 +00:00
|
|
|
VM_OBJECT_LOCK(new_object);
|
|
|
|
VM_OBJECT_LOCK(orig_object);
|
2002-06-02 23:54:09 +00:00
|
|
|
source = orig_object->backing_object;
|
|
|
|
if (source != NULL) {
|
2003-05-01 05:06:33 +00:00
|
|
|
VM_OBJECT_LOCK(source);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_INSERT_HEAD(&source->shadow_head,
|
2002-06-02 23:54:09 +00:00
|
|
|
new_object, shadow_list);
|
2003-05-01 05:06:33 +00:00
|
|
|
source->shadow_count++;
|
|
|
|
source->generation++;
|
2003-11-02 21:30:10 +00:00
|
|
|
vm_object_reference_locked(source); /* for new_object */
|
2002-06-02 23:54:09 +00:00
|
|
|
vm_object_clear_flag(source, OBJ_ONEMAPPING);
|
2003-04-13 20:22:02 +00:00
|
|
|
VM_OBJECT_UNLOCK(source);
|
2002-06-02 23:54:09 +00:00
|
|
|
new_object->backing_object_offset =
|
2003-12-30 22:28:36 +00:00
|
|
|
orig_object->backing_object_offset + entry->offset;
|
2002-06-02 23:54:09 +00:00
|
|
|
new_object->backing_object = source;
|
|
|
|
}
|
|
|
|
for (idx = 0; idx < size; idx++) {
|
|
|
|
retry:
|
|
|
|
m = vm_page_lookup(orig_object, offidxstart + idx);
|
|
|
|
if (m == NULL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We must wait for pending I/O to complete before we can
|
|
|
|
* rename the page.
|
|
|
|
*
|
|
|
|
* We do not have to VM_PROT_NONE the page as mappings should
|
|
|
|
* not be changed by this operation.
|
|
|
|
*/
|
2002-08-02 18:55:29 +00:00
|
|
|
vm_page_lock_queues();
|
2003-11-01 04:54:23 +00:00
|
|
|
if ((m->flags & PG_BUSY) || m->busy) {
|
|
|
|
vm_page_flag_set(m, PG_WANTED | PG_REFERENCED);
|
|
|
|
VM_OBJECT_UNLOCK(orig_object);
|
|
|
|
VM_OBJECT_UNLOCK(new_object);
|
|
|
|
msleep(m, &vm_page_queue_mtx, PDROP | PVM, "spltwt", 0);
|
|
|
|
VM_OBJECT_LOCK(new_object);
|
|
|
|
VM_OBJECT_LOCK(orig_object);
|
2002-06-02 23:54:09 +00:00
|
|
|
goto retry;
|
2003-11-01 04:54:23 +00:00
|
|
|
}
|
2002-06-02 23:54:09 +00:00
|
|
|
vm_page_busy(m);
|
|
|
|
vm_page_rename(m, new_object, idx);
|
|
|
|
/* page automatically made dirty by rename and cache handled */
|
|
|
|
vm_page_busy(m);
|
2002-12-18 04:39:15 +00:00
|
|
|
vm_page_unlock_queues();
|
2002-06-02 23:54:09 +00:00
|
|
|
}
|
|
|
|
if (orig_object->type == OBJT_SWAP) {
|
|
|
|
/*
|
2003-11-01 08:57:26 +00:00
|
|
|
* swap_pager_copy() can sleep, in which case the orig_object's
|
|
|
|
* and new_object's locks are released and reacquired.
|
2002-06-02 23:54:09 +00:00
|
|
|
*/
|
|
|
|
swap_pager_copy(orig_object, new_object, offidxstart, 0);
|
|
|
|
}
|
2003-04-20 23:23:41 +00:00
|
|
|
VM_OBJECT_UNLOCK(orig_object);
|
2002-12-24 04:24:58 +00:00
|
|
|
vm_page_lock_queues();
|
2002-07-07 06:01:25 +00:00
|
|
|
TAILQ_FOREACH(m, &new_object->memq, listq)
|
|
|
|
vm_page_wakeup(m);
|
2002-12-24 04:24:58 +00:00
|
|
|
vm_page_unlock_queues();
|
2003-11-01 08:57:26 +00:00
|
|
|
VM_OBJECT_UNLOCK(new_object);
|
2002-06-02 23:54:09 +00:00
|
|
|
entry->object.vm_object = new_object;
|
|
|
|
entry->offset = 0LL;
|
|
|
|
vm_object_deallocate(orig_object);
|
2003-12-30 22:28:36 +00:00
|
|
|
VM_OBJECT_LOCK(new_object);
|
2002-06-02 23:54:09 +00:00
|
|
|
}
|
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
#define OBSC_TEST_ALL_SHADOWED 0x0001
|
|
|
|
#define OBSC_COLLAPSE_NOWAIT 0x0002
|
|
|
|
#define OBSC_COLLAPSE_WAIT 0x0004
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-07-22 09:27:58 +00:00
|
|
|
static int
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_object_backing_scan(vm_object_t object, int op)
|
1994-11-06 05:07:53 +00:00
|
|
|
{
|
1999-02-08 19:00:15 +00:00
|
|
|
int s;
|
|
|
|
int r = 1;
|
|
|
|
vm_page_t p;
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_object_t backing_object;
|
|
|
|
vm_pindex_t backing_offset_index;
|
1994-11-06 05:07:53 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
s = splvm();
|
2003-06-22 02:35:06 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
|
|
|
VM_OBJECT_LOCK_ASSERT(object->backing_object, MA_OWNED);
|
1995-01-05 04:30:40 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
backing_object = object->backing_object;
|
1995-12-11 04:58:34 +00:00
|
|
|
backing_offset_index = OFF_TO_IDX(object->backing_object_offset);
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1999-02-04 17:47:52 +00:00
|
|
|
/*
|
1999-02-08 19:00:15 +00:00
|
|
|
* Initial conditions
|
1999-02-04 17:47:52 +00:00
|
|
|
*/
|
1999-02-08 19:00:15 +00:00
|
|
|
if (op & OBSC_TEST_ALL_SHADOWED) {
|
|
|
|
/*
|
2000-03-26 15:20:23 +00:00
|
|
|
* We do not want to have to test for the existence of
|
1999-02-08 19:00:15 +00:00
|
|
|
* swap pages in the backing object. XXX but with the
|
|
|
|
* new swapper this would be pretty easy to do.
|
|
|
|
*
|
|
|
|
* XXX what about anonymous MAP_SHARED memory that hasn't
|
|
|
|
* been ZFOD faulted yet? If we do not test for this, the
|
|
|
|
* shadow test may succeed! XXX
|
|
|
|
*/
|
|
|
|
if (backing_object->type != OBJT_DEFAULT) {
|
|
|
|
splx(s);
|
2002-03-10 21:52:48 +00:00
|
|
|
return (0);
|
1999-02-08 19:00:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
if (op & OBSC_COLLAPSE_WAIT) {
|
|
|
|
vm_object_set_flag(backing_object, OBJ_DEAD);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Our scan
|
|
|
|
*/
|
1996-05-18 03:38:05 +00:00
|
|
|
p = TAILQ_FIRST(&backing_object->memq);
|
1994-11-06 05:07:53 +00:00
|
|
|
while (p) {
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_page_t next = TAILQ_NEXT(p, listq);
|
|
|
|
vm_pindex_t new_pindex = p->pindex - backing_offset_index;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
if (op & OBSC_TEST_ALL_SHADOWED) {
|
|
|
|
vm_page_t pp;
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
/*
|
|
|
|
* Ignore pages outside the parent object's range
|
|
|
|
* and outside the parent object's mapping of the
|
|
|
|
* backing object.
|
|
|
|
*
|
|
|
|
* note that we do not busy the backing object's
|
|
|
|
* page.
|
|
|
|
*/
|
|
|
|
if (
|
|
|
|
p->pindex < backing_offset_index ||
|
|
|
|
new_pindex >= object->size
|
|
|
|
) {
|
|
|
|
p = next;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* See if the parent has the page or if the parent's
|
|
|
|
* object pager has the page. If the parent has the
|
|
|
|
* page but the page is not valid, the parent's
|
|
|
|
* object pager must have the page.
|
|
|
|
*
|
|
|
|
* If this fails, the parent does not completely shadow
|
|
|
|
* the object and we might as well give up now.
|
|
|
|
*/
|
|
|
|
|
|
|
|
pp = vm_page_lookup(object, new_pindex);
|
|
|
|
if (
|
|
|
|
(pp == NULL || pp->valid == 0) &&
|
|
|
|
!vm_pager_has_page(object, new_pindex, NULL, NULL)
|
|
|
|
) {
|
|
|
|
r = 0;
|
|
|
|
break;
|
|
|
|
}
|
1994-11-06 05:07:53 +00:00
|
|
|
}
|
1999-01-21 08:29:12 +00:00
|
|
|
|
|
|
|
/*
|
1999-02-08 19:00:15 +00:00
|
|
|
* Check for busy page
|
1999-01-21 08:29:12 +00:00
|
|
|
*/
|
1999-02-08 19:00:15 +00:00
|
|
|
if (op & (OBSC_COLLAPSE_WAIT | OBSC_COLLAPSE_NOWAIT)) {
|
|
|
|
vm_page_t pp;
|
|
|
|
|
2002-08-02 18:55:29 +00:00
|
|
|
vm_page_lock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
if (op & OBSC_COLLAPSE_NOWAIT) {
|
2002-08-02 18:55:29 +00:00
|
|
|
if ((p->flags & PG_BUSY) ||
|
1999-02-08 19:00:15 +00:00
|
|
|
!p->valid ||
|
|
|
|
p->hold_count ||
|
|
|
|
p->wire_count ||
|
2002-08-02 18:55:29 +00:00
|
|
|
p->busy) {
|
|
|
|
vm_page_unlock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
p = next;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
} else if (op & OBSC_COLLAPSE_WAIT) {
|
2003-06-22 02:35:06 +00:00
|
|
|
if ((p->flags & PG_BUSY) || p->busy) {
|
|
|
|
vm_page_flag_set(p,
|
|
|
|
PG_WANTED | PG_REFERENCED);
|
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
|
|
|
VM_OBJECT_UNLOCK(object);
|
|
|
|
msleep(p, &vm_page_queue_mtx,
|
|
|
|
PDROP | PVM, "vmocol", 0);
|
|
|
|
VM_OBJECT_LOCK(object);
|
|
|
|
VM_OBJECT_LOCK(backing_object);
|
1999-02-08 19:00:15 +00:00
|
|
|
/*
|
|
|
|
* If we slept, anything could have
|
|
|
|
* happened. Since the object is
|
|
|
|
* marked dead, the backing offset
|
|
|
|
* should not have changed so we
|
|
|
|
* just restart our scan.
|
|
|
|
*/
|
|
|
|
p = TAILQ_FIRST(&backing_object->memq);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
1998-01-31 11:56:53 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
/*
|
|
|
|
* Busy the page
|
|
|
|
*/
|
|
|
|
vm_page_busy(p);
|
2002-08-02 18:55:29 +00:00
|
|
|
vm_page_unlock_queues();
|
1999-02-04 17:47:52 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
KASSERT(
|
|
|
|
p->object == backing_object,
|
|
|
|
("vm_object_qcollapse(): object mismatch")
|
|
|
|
);
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1999-02-04 17:47:52 +00:00
|
|
|
/*
|
1999-02-08 19:00:15 +00:00
|
|
|
* Destroy any associated swap
|
1999-02-04 17:47:52 +00:00
|
|
|
*/
|
1999-02-08 19:00:15 +00:00
|
|
|
if (backing_object->type == OBJT_SWAP) {
|
|
|
|
swap_pager_freespace(
|
|
|
|
backing_object,
|
|
|
|
p->pindex,
|
|
|
|
1
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (
|
|
|
|
p->pindex < backing_offset_index ||
|
|
|
|
new_pindex >= object->size
|
|
|
|
) {
|
|
|
|
/*
|
|
|
|
* Page is out of the parent object's range, we
|
|
|
|
* can simply destroy it.
|
|
|
|
*/
|
2002-07-28 19:01:38 +00:00
|
|
|
vm_page_lock_queues();
|
2002-11-16 07:44:25 +00:00
|
|
|
pmap_remove_all(p);
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_page_free(p);
|
2002-07-28 19:01:38 +00:00
|
|
|
vm_page_unlock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
p = next;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
1995-12-11 04:58:34 +00:00
|
|
|
pp = vm_page_lookup(object, new_pindex);
|
1999-02-08 19:00:15 +00:00
|
|
|
if (
|
|
|
|
pp != NULL ||
|
|
|
|
vm_pager_has_page(object, new_pindex, NULL, NULL)
|
|
|
|
) {
|
1999-02-04 17:47:52 +00:00
|
|
|
/*
|
|
|
|
* page already exists in parent OR swap exists
|
|
|
|
* for this location in the parent. Destroy
|
|
|
|
* the original page from the backing object.
|
1999-02-08 19:00:15 +00:00
|
|
|
*
|
|
|
|
* Leave the parent's page alone
|
1999-02-04 17:47:52 +00:00
|
|
|
*/
|
2002-07-28 19:01:38 +00:00
|
|
|
vm_page_lock_queues();
|
2002-11-16 07:44:25 +00:00
|
|
|
pmap_remove_all(p);
|
1994-11-06 05:07:53 +00:00
|
|
|
vm_page_free(p);
|
2002-07-28 19:01:38 +00:00
|
|
|
vm_page_unlock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
p = next;
|
|
|
|
continue;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
}
|
1999-02-04 17:47:52 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
/*
|
|
|
|
* Page does not exist in parent, rename the
|
|
|
|
* page from the backing object to the main object.
|
1999-02-24 21:26:26 +00:00
|
|
|
*
|
|
|
|
* If the page was mapped to a process, it can remain
|
|
|
|
* mapped through the rename.
|
1999-02-08 19:00:15 +00:00
|
|
|
*/
|
2002-12-29 07:17:06 +00:00
|
|
|
vm_page_lock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_page_rename(p, object, new_pindex);
|
2002-12-29 07:17:06 +00:00
|
|
|
vm_page_unlock_queues();
|
1999-02-08 19:00:15 +00:00
|
|
|
/* page automatically made dirty by rename */
|
1999-02-04 17:47:52 +00:00
|
|
|
}
|
1994-11-06 05:07:53 +00:00
|
|
|
p = next;
|
|
|
|
}
|
1999-02-04 17:47:52 +00:00
|
|
|
splx(s);
|
2002-03-10 21:52:48 +00:00
|
|
|
return (r);
|
1999-02-08 19:00:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* this version of collapse allows the operation to occur earlier and
|
|
|
|
* when paging_in_progress is true for an object... This is not a complete
|
|
|
|
* operation, but should plug 99.9% of the rest of the leaks.
|
|
|
|
*/
|
|
|
|
static void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_qcollapse(vm_object_t object)
|
1999-02-08 19:00:15 +00:00
|
|
|
{
|
|
|
|
vm_object_t backing_object = object->backing_object;
|
|
|
|
|
2003-06-21 04:14:48 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
|
|
|
VM_OBJECT_LOCK_ASSERT(backing_object, MA_OWNED);
|
2001-07-04 20:15:18 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
if (backing_object->ref_count != 1)
|
|
|
|
return;
|
|
|
|
|
|
|
|
backing_object->ref_count += 2;
|
|
|
|
|
|
|
|
vm_object_backing_scan(object, OBSC_COLLAPSE_NOWAIT);
|
|
|
|
|
|
|
|
backing_object->ref_count -= 2;
|
1994-11-06 05:07:53 +00:00
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
|
|
|
* vm_object_collapse:
|
|
|
|
*
|
|
|
|
* Collapse an object with the object backing it.
|
|
|
|
* Pages in the backing object are moved into the
|
|
|
|
* parent, and the backing object is deallocated.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_collapse(vm_object_t object)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
2003-06-07 02:29:17 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-05-19 01:28:09 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
while (TRUE) {
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_object_t backing_object;
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Verify that the conditions are right for collapse:
|
1995-05-30 08:16:23 +00:00
|
|
|
*
|
1999-02-08 19:00:15 +00:00
|
|
|
* The object exists and the backing object exists.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if ((backing_object = object->backing_object) == NULL)
|
1999-02-08 19:00:15 +00:00
|
|
|
break;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
1995-03-01 23:30:04 +00:00
|
|
|
/*
|
|
|
|
* we check the backing object first, because it is most likely
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
* not collapsable.
|
1995-03-01 23:30:04 +00:00
|
|
|
*/
|
2003-06-05 20:55:27 +00:00
|
|
|
VM_OBJECT_LOCK(backing_object);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (backing_object->handle != NULL ||
|
|
|
|
(backing_object->type != OBJT_DEFAULT &&
|
|
|
|
backing_object->type != OBJT_SWAP) ||
|
1995-03-01 23:30:04 +00:00
|
|
|
(backing_object->flags & OBJ_DEAD) ||
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
object->handle != NULL ||
|
|
|
|
(object->type != OBJT_DEFAULT &&
|
|
|
|
object->type != OBJT_SWAP) ||
|
|
|
|
(object->flags & OBJ_DEAD)) {
|
2003-06-05 20:55:27 +00:00
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
1999-02-08 19:00:15 +00:00
|
|
|
break;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
}
|
1995-02-18 06:48:33 +00:00
|
|
|
|
1999-02-08 19:00:15 +00:00
|
|
|
if (
|
|
|
|
object->paging_in_progress != 0 ||
|
|
|
|
backing_object->paging_in_progress != 0
|
|
|
|
) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
vm_object_qcollapse(object);
|
2003-06-05 20:55:27 +00:00
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
1999-02-08 19:00:15 +00:00
|
|
|
break;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* We know that we can either collapse the backing object (if
|
1999-02-08 19:00:15 +00:00
|
|
|
* the parent is the only reference to it) or (perhaps) have
|
|
|
|
* the parent bypass the object if the parent happens to shadow
|
|
|
|
* all the resident pages in the entire backing object.
|
|
|
|
*
|
|
|
|
* This is ignoring pager-backed pages such as swap pages.
|
|
|
|
* vm_object_backing_scan fails the shadowing test in this
|
|
|
|
* case.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
if (backing_object->ref_count == 1) {
|
|
|
|
/*
|
1999-02-08 19:00:15 +00:00
|
|
|
* If there is exactly one reference to the backing
|
|
|
|
* object, we can collapse it into the parent.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-02-08 19:00:15 +00:00
|
|
|
vm_object_backing_scan(object, OBSC_COLLAPSE_WAIT);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Move the pager from backing_object to object.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (backing_object->type == OBJT_SWAP) {
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
2003-11-01 08:57:26 +00:00
|
|
|
* swap_pager_copy() can sleep, in which case
|
|
|
|
* the backing_object's and object's locks are
|
|
|
|
* released and reacquired.
|
1999-01-21 08:29:12 +00:00
|
|
|
*/
|
|
|
|
swap_pager_copy(
|
|
|
|
backing_object,
|
|
|
|
object,
|
|
|
|
OFF_TO_IDX(object->backing_object_offset), TRUE);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Object now shadows whatever backing_object did.
|
1999-02-08 19:00:15 +00:00
|
|
|
* Note that the reference to
|
|
|
|
* backing_object->backing_object moves from within
|
|
|
|
* backing_object to within object.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_REMOVE(object, shadow_list);
|
2003-05-02 03:00:21 +00:00
|
|
|
backing_object->shadow_count--;
|
|
|
|
backing_object->generation++;
|
1996-03-02 02:54:24 +00:00
|
|
|
if (backing_object->backing_object) {
|
2003-05-02 04:55:21 +00:00
|
|
|
VM_OBJECT_LOCK(backing_object->backing_object);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_REMOVE(backing_object, shadow_list);
|
2003-10-26 06:29:26 +00:00
|
|
|
LIST_INSERT_HEAD(
|
|
|
|
&backing_object->backing_object->shadow_head,
|
|
|
|
object, shadow_list);
|
|
|
|
/*
|
|
|
|
* The shadow_count has not changed.
|
|
|
|
*/
|
1998-01-31 11:56:53 +00:00
|
|
|
backing_object->backing_object->generation++;
|
2003-05-02 04:55:21 +00:00
|
|
|
VM_OBJECT_UNLOCK(backing_object->backing_object);
|
1996-03-02 02:54:24 +00:00
|
|
|
}
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
object->backing_object = backing_object->backing_object;
|
1999-02-08 19:00:15 +00:00
|
|
|
object->backing_object_offset +=
|
|
|
|
backing_object->backing_object_offset;
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Discard backing_object.
|
1995-05-30 08:16:23 +00:00
|
|
|
*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Since the backing object has no pages, no pager left,
|
|
|
|
* and no object references within it, all that is
|
|
|
|
* necessary is to dispose of it.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
2001-10-26 00:08:05 +00:00
|
|
|
KASSERT(backing_object->ref_count == 1, ("backing_object %p was somehow re-referenced during collapse!", backing_object));
|
2003-05-02 04:55:21 +00:00
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2002-04-20 07:23:22 +00:00
|
|
|
mtx_lock(&vm_object_list_mtx);
|
1999-02-08 19:00:15 +00:00
|
|
|
TAILQ_REMOVE(
|
|
|
|
&vm_object_list,
|
|
|
|
backing_object,
|
|
|
|
object_list
|
|
|
|
);
|
2002-04-20 07:23:22 +00:00
|
|
|
mtx_unlock(&vm_object_list_mtx);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2002-03-20 04:02:59 +00:00
|
|
|
uma_zfree(obj_zone, backing_object);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
object_collapses++;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
} else {
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
vm_object_t new_backing_object;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
1999-02-08 19:00:15 +00:00
|
|
|
* If we do not entirely shadow the backing object,
|
|
|
|
* there is nothing we can do so we give up.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-02-08 19:00:15 +00:00
|
|
|
if (vm_object_backing_scan(object, OBSC_TEST_ALL_SHADOWED) == 0) {
|
2003-06-05 20:55:27 +00:00
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
1999-02-08 19:00:15 +00:00
|
|
|
break;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Make the parent shadow the next object in the
|
|
|
|
* chain. Deallocating backing_object will not remove
|
|
|
|
* it, since its reference count is at least 2.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_REMOVE(object, shadow_list);
|
1998-01-31 11:56:53 +00:00
|
|
|
backing_object->shadow_count--;
|
|
|
|
backing_object->generation++;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
|
|
|
new_backing_object = backing_object->backing_object;
|
1999-01-28 00:57:57 +00:00
|
|
|
if ((object->backing_object = new_backing_object) != NULL) {
|
2003-05-02 04:55:21 +00:00
|
|
|
VM_OBJECT_LOCK(new_backing_object);
|
2003-05-18 04:10:16 +00:00
|
|
|
LIST_INSERT_HEAD(
|
1999-02-08 19:00:15 +00:00
|
|
|
&new_backing_object->shadow_head,
|
|
|
|
object,
|
|
|
|
shadow_list
|
|
|
|
);
|
1998-01-31 11:56:53 +00:00
|
|
|
new_backing_object->shadow_count++;
|
|
|
|
new_backing_object->generation++;
|
2003-11-02 21:30:10 +00:00
|
|
|
vm_object_reference_locked(new_backing_object);
|
2003-05-02 04:55:21 +00:00
|
|
|
VM_OBJECT_UNLOCK(new_backing_object);
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
object->backing_object_offset +=
|
|
|
|
backing_object->backing_object_offset;
|
1996-03-02 02:54:24 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
|
|
|
* Drop the reference count on backing_object. Since
|
2003-11-01 23:06:41 +00:00
|
|
|
* its ref_count was at least 2, it will not vanish.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
2003-11-01 23:06:41 +00:00
|
|
|
backing_object->ref_count--;
|
|
|
|
VM_OBJECT_UNLOCK(backing_object);
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
object_bypasses++;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Try again with this object's new backing object.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2003-05-03 08:09:24 +00:00
|
|
|
* vm_object_page_remove:
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
2003-05-03 08:09:24 +00:00
|
|
|
* Removes all physical pages in the given range from the
|
|
|
|
* object's list of pages. If the range's end is zero, all
|
|
|
|
* physical pages from the range's start to the end of the object
|
|
|
|
* are deleted.
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
|
|
|
* The object must be locked.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
void
|
2003-04-26 23:41:30 +00:00
|
|
|
vm_object_page_remove(vm_object_t object, vm_pindex_t start, vm_pindex_t end,
|
|
|
|
boolean_t clean_only)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_page_t p, next;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-04-26 23:41:30 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
|
|
|
if (object->resident_page_count == 0)
|
2002-05-31 03:48:55 +00:00
|
|
|
return;
|
Make our v_usecount vnode reference count work identically to the
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
|
|
|
|
2000-05-29 22:40:54 +00:00
|
|
|
/*
|
|
|
|
* Since physically-backed objects do not use managed pages, we can't
|
|
|
|
* remove pages from the object (we must instead remove the page
|
|
|
|
* references, and then destroy the object).
|
|
|
|
*/
|
2003-04-26 23:41:30 +00:00
|
|
|
KASSERT(object->type != OBJT_PHYS,
|
|
|
|
("attempt to remove pages from a physical object"));
|
2000-05-29 22:40:54 +00:00
|
|
|
|
1998-08-06 08:33:19 +00:00
|
|
|
vm_object_pip_add(object, 1);
|
1994-05-25 09:21:21 +00:00
|
|
|
again:
|
2002-07-30 07:23:04 +00:00
|
|
|
vm_page_lock_queues();
|
2003-01-27 01:12:35 +00:00
|
|
|
if ((p = TAILQ_FIRST(&object->memq)) != NULL) {
|
|
|
|
if (p->pindex < start) {
|
|
|
|
p = vm_page_splay(start, object->root);
|
|
|
|
if ((object->root = p)->pindex < start)
|
|
|
|
p = TAILQ_NEXT(p, listq);
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
2003-01-27 01:12:35 +00:00
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Assert: the variable p is either (1) the page with the
|
|
|
|
* least pindex greater than or equal to the parameter pindex
|
|
|
|
* or (2) NULL.
|
|
|
|
*/
|
|
|
|
for (;
|
2003-05-03 08:09:24 +00:00
|
|
|
p != NULL && (p->pindex < end || end == 0);
|
2003-01-27 01:12:35 +00:00
|
|
|
p = next) {
|
|
|
|
next = TAILQ_NEXT(p, listq);
|
|
|
|
|
|
|
|
if (p->wire_count != 0) {
|
|
|
|
pmap_remove_all(p);
|
|
|
|
if (!clean_only)
|
|
|
|
p->valid = 0;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (vm_page_sleep_if_busy(p, TRUE, "vmopar"))
|
|
|
|
goto again;
|
|
|
|
if (clean_only && p->valid) {
|
|
|
|
vm_page_test_dirty(p);
|
|
|
|
if (p->valid & p->dirty)
|
|
|
|
continue;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
2003-01-27 01:12:35 +00:00
|
|
|
vm_page_busy(p);
|
|
|
|
pmap_remove_all(p);
|
|
|
|
vm_page_free(p);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
2002-07-30 07:23:04 +00:00
|
|
|
vm_page_unlock_queues();
|
1995-03-01 23:30:04 +00:00
|
|
|
vm_object_pip_wakeup(object);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Routine: vm_object_coalesce
|
|
|
|
* Function: Coalesces two objects backing up adjoining
|
|
|
|
* regions of memory into a single object.
|
|
|
|
*
|
|
|
|
* returns TRUE if objects were combined.
|
|
|
|
*
|
|
|
|
* NOTE: Only works at the moment if the second object is NULL -
|
|
|
|
* if it's not, which object do we lock first?
|
|
|
|
*
|
|
|
|
* Parameters:
|
|
|
|
* prev_object First object to coalesce
|
|
|
|
* prev_offset Offset into prev_object
|
|
|
|
* next_object Second object into coalesce
|
|
|
|
* next_offset Offset into next_object
|
|
|
|
*
|
|
|
|
* prev_size Size of reference to prev_object
|
|
|
|
* next_size Size of reference to next_object
|
|
|
|
*
|
|
|
|
* Conditions:
|
|
|
|
* The object must *not* be locked.
|
|
|
|
*/
|
1995-05-30 08:16:23 +00:00
|
|
|
boolean_t
|
2002-06-19 06:02:03 +00:00
|
|
|
vm_object_coalesce(vm_object_t prev_object, vm_pindex_t prev_pindex,
|
|
|
|
vm_size_t prev_size, vm_size_t next_size)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1999-05-16 05:07:34 +00:00
|
|
|
vm_pindex_t next_pindex;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2002-06-19 06:02:03 +00:00
|
|
|
if (prev_object == NULL)
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
return (TRUE);
|
2003-06-03 19:37:01 +00:00
|
|
|
VM_OBJECT_LOCK(prev_object);
|
1999-02-03 01:57:17 +00:00
|
|
|
if (prev_object->type != OBJT_DEFAULT &&
|
|
|
|
prev_object->type != OBJT_SWAP) {
|
2003-06-03 19:37:01 +00:00
|
|
|
VM_OBJECT_UNLOCK(prev_object);
|
1996-03-28 04:53:28 +00:00
|
|
|
return (FALSE);
|
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Try to collapse the object first
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
vm_object_collapse(prev_object);
|
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Can't coalesce if: . more than one reference . paged out . shadows
|
|
|
|
* another object . has a copy elsewhere (any of which mean that the
|
|
|
|
* pages not mapped to prev_entry may be in use anyway)
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1996-12-31 16:23:38 +00:00
|
|
|
if (prev_object->backing_object != NULL) {
|
2003-06-03 19:37:01 +00:00
|
|
|
VM_OBJECT_UNLOCK(prev_object);
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
return (FALSE);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
1995-12-11 04:58:34 +00:00
|
|
|
|
|
|
|
prev_size >>= PAGE_SHIFT;
|
|
|
|
next_size >>= PAGE_SHIFT;
|
1999-05-16 05:07:34 +00:00
|
|
|
next_pindex = prev_pindex + prev_size;
|
1996-12-31 16:23:38 +00:00
|
|
|
|
|
|
|
if ((prev_object->ref_count > 1) &&
|
1999-05-16 05:07:34 +00:00
|
|
|
(prev_object->size != next_pindex)) {
|
2003-06-03 19:37:01 +00:00
|
|
|
VM_OBJECT_UNLOCK(prev_object);
|
1996-12-31 16:23:38 +00:00
|
|
|
return (FALSE);
|
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Remove any pages that may still be in the object from a previous
|
|
|
|
* deallocation.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-05-16 05:07:34 +00:00
|
|
|
if (next_pindex < prev_object->size) {
|
|
|
|
vm_object_page_remove(prev_object,
|
|
|
|
next_pindex,
|
|
|
|
next_pindex + next_size, FALSE);
|
|
|
|
if (prev_object->type == OBJT_SWAP)
|
|
|
|
swap_pager_freespace(prev_object,
|
|
|
|
next_pindex, next_size);
|
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Extend the object if necessary.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-05-16 05:07:34 +00:00
|
|
|
if (next_pindex + next_size > prev_object->size)
|
|
|
|
prev_object->size = next_pindex + next_size;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
2003-06-03 19:37:01 +00:00
|
|
|
VM_OBJECT_UNLOCK(prev_object);
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
return (TRUE);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
2001-10-26 16:27:54 +00:00
|
|
|
void
|
|
|
|
vm_object_set_writeable_dirty(vm_object_t object)
|
|
|
|
{
|
|
|
|
struct vnode *vp;
|
|
|
|
|
2003-11-01 04:54:23 +00:00
|
|
|
VM_OBJECT_LOCK_ASSERT(object, MA_OWNED);
|
2001-10-26 16:27:54 +00:00
|
|
|
vm_object_set_flag(object, OBJ_WRITEABLE|OBJ_MIGHTBEDIRTY);
|
|
|
|
if (object->type == OBJT_VNODE &&
|
|
|
|
(vp = (struct vnode *)object->handle) != NULL) {
|
2002-08-04 10:29:36 +00:00
|
|
|
VI_LOCK(vp);
|
|
|
|
if ((vp->v_iflag & VI_OBJDIRTY) == 0)
|
|
|
|
vp->v_iflag |= VI_OBJDIRTY;
|
|
|
|
VI_UNLOCK(vp);
|
2001-10-26 16:27:54 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1996-09-14 11:54:59 +00:00
|
|
|
#include "opt_ddb.h"
|
1995-04-16 12:56:22 +00:00
|
|
|
#ifdef DDB
|
1996-09-14 11:54:59 +00:00
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
1999-08-09 10:35:05 +00:00
|
|
|
#include <sys/cons.h>
|
1996-09-14 11:54:59 +00:00
|
|
|
|
|
|
|
#include <ddb/ddb.h>
|
|
|
|
|
1995-12-03 12:18:39 +00:00
|
|
|
static int
|
2001-07-04 20:15:18 +00:00
|
|
|
_vm_object_in_map(vm_map_t map, vm_object_t object, vm_map_entry_t entry)
|
1995-02-02 09:09:15 +00:00
|
|
|
{
|
|
|
|
vm_map_t tmpm;
|
|
|
|
vm_map_entry_t tmpe;
|
|
|
|
vm_object_t obj;
|
|
|
|
int entcount;
|
|
|
|
|
|
|
|
if (map == 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (entry == 0) {
|
|
|
|
tmpe = map->header.next;
|
|
|
|
entcount = map->nentries;
|
|
|
|
while (entcount-- && (tmpe != &map->header)) {
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(map, object, tmpe)) {
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
tmpe = tmpe->next;
|
|
|
|
}
|
1999-02-07 21:48:23 +00:00
|
|
|
} else if (entry->eflags & MAP_ENTRY_IS_SUB_MAP) {
|
|
|
|
tmpm = entry->object.sub_map;
|
1995-02-02 09:09:15 +00:00
|
|
|
tmpe = tmpm->header.next;
|
|
|
|
entcount = tmpm->nentries;
|
|
|
|
while (entcount-- && tmpe != &tmpm->header) {
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(tmpm, object, tmpe)) {
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
tmpe = tmpe->next;
|
|
|
|
}
|
1999-01-28 00:57:57 +00:00
|
|
|
} else if ((obj = entry->object.vm_object) != NULL) {
|
2001-07-04 19:00:13 +00:00
|
|
|
for (; obj; obj = obj->backing_object)
|
2002-03-10 21:52:48 +00:00
|
|
|
if (obj == object) {
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1995-12-03 12:18:39 +00:00
|
|
|
static int
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_in_map(vm_object_t object)
|
1995-02-02 09:09:15 +00:00
|
|
|
{
|
|
|
|
struct proc *p;
|
2001-03-28 11:52:56 +00:00
|
|
|
|
2001-05-23 22:42:10 +00:00
|
|
|
/* sx_slock(&allproc_lock); */
|
2001-02-04 13:13:25 +00:00
|
|
|
LIST_FOREACH(p, &allproc, p_list) {
|
2002-03-10 21:52:48 +00:00
|
|
|
if (!p->p_vmspace /* || (p->p_flag & (P_SYSTEM|P_WEXIT)) */)
|
1995-02-02 09:09:15 +00:00
|
|
|
continue;
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(&p->p_vmspace->vm_map, object, 0)) {
|
2001-05-23 22:42:10 +00:00
|
|
|
/* sx_sunlock(&allproc_lock); */
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
2000-11-22 07:42:04 +00:00
|
|
|
}
|
1995-02-02 09:09:15 +00:00
|
|
|
}
|
2001-05-23 22:42:10 +00:00
|
|
|
/* sx_sunlock(&allproc_lock); */
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(kernel_map, object, 0))
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(kmem_map, object, 0))
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(pager_map, object, 0))
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
2002-03-10 21:52:48 +00:00
|
|
|
if (_vm_object_in_map(buffer_map, object, 0))
|
1995-02-02 09:09:15 +00:00
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1996-09-14 11:54:59 +00:00
|
|
|
DB_SHOW_COMMAND(vmochk, vm_object_check)
|
1995-12-14 09:55:16 +00:00
|
|
|
{
|
1995-02-02 09:09:15 +00:00
|
|
|
vm_object_t object;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* make sure that internal objs are in a map somewhere
|
|
|
|
* and none have zero ref counts.
|
|
|
|
*/
|
2001-04-15 10:22:04 +00:00
|
|
|
TAILQ_FOREACH(object, &vm_object_list, object_list) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (object->handle == NULL &&
|
|
|
|
(object->type == OBJT_DEFAULT || object->type == OBJT_SWAP)) {
|
1995-05-02 05:57:11 +00:00
|
|
|
if (object->ref_count == 0) {
|
1999-07-01 19:53:43 +00:00
|
|
|
db_printf("vmochk: internal obj has zero ref count: %ld\n",
|
|
|
|
(long)object->size);
|
1995-02-02 09:09:15 +00:00
|
|
|
}
|
1995-05-02 05:57:11 +00:00
|
|
|
if (!vm_object_in_map(object)) {
|
1998-07-11 11:30:46 +00:00
|
|
|
db_printf(
|
|
|
|
"vmochk: internal obj is not in a map: "
|
|
|
|
"ref: %d, size: %lu: 0x%lx, backing_object: %p\n",
|
|
|
|
object->ref_count, (u_long)object->size,
|
|
|
|
(u_long)object->size,
|
|
|
|
(void *)object->backing_object);
|
1995-02-02 09:09:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
|
|
|
* vm_object_print: [ debug ]
|
|
|
|
*/
|
1996-09-14 11:54:59 +00:00
|
|
|
DB_SHOW_COMMAND(object, vm_object_print_static)
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
1996-09-14 11:54:59 +00:00
|
|
|
/* XXX convert args. */
|
|
|
|
vm_object_t object = (vm_object_t)addr;
|
|
|
|
boolean_t full = have_addr;
|
|
|
|
|
1999-02-08 05:15:54 +00:00
|
|
|
vm_page_t p;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1996-09-14 11:54:59 +00:00
|
|
|
/* XXX count is an (unused) arg. Avoid shadowing it. */
|
|
|
|
#define count was_count
|
|
|
|
|
1999-02-08 05:15:54 +00:00
|
|
|
int count;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
if (object == NULL)
|
|
|
|
return;
|
|
|
|
|
1998-07-14 12:26:15 +00:00
|
|
|
db_iprintf(
|
2002-11-07 23:03:04 +00:00
|
|
|
"Object %p: type=%d, size=0x%jx, res=%d, ref=%d, flags=0x%x\n",
|
|
|
|
object, (int)object->type, (uintmax_t)object->size,
|
1998-07-14 12:26:15 +00:00
|
|
|
object->resident_page_count, object->ref_count, object->flags);
|
2002-11-07 23:03:04 +00:00
|
|
|
db_iprintf(" sref=%d, backing_object(%d)=(%p)+0x%jx\n",
|
1999-01-21 08:29:12 +00:00
|
|
|
object->shadow_count,
|
1998-07-14 12:26:15 +00:00
|
|
|
object->backing_object ? object->backing_object->ref_count : 0,
|
2002-11-07 23:03:04 +00:00
|
|
|
object->backing_object, (uintmax_t)object->backing_object_offset);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
if (!full)
|
|
|
|
return;
|
|
|
|
|
1996-09-14 11:54:59 +00:00
|
|
|
db_indent += 2;
|
1994-05-24 10:09:53 +00:00
|
|
|
count = 0;
|
2001-02-04 13:13:25 +00:00
|
|
|
TAILQ_FOREACH(p, &object->memq, listq) {
|
1994-05-24 10:09:53 +00:00
|
|
|
if (count == 0)
|
1996-09-14 11:54:59 +00:00
|
|
|
db_iprintf("memory:=");
|
1994-05-24 10:09:53 +00:00
|
|
|
else if (count == 6) {
|
1996-09-14 11:54:59 +00:00
|
|
|
db_printf("\n");
|
|
|
|
db_iprintf(" ...");
|
1994-05-24 10:09:53 +00:00
|
|
|
count = 0;
|
|
|
|
} else
|
1996-09-14 11:54:59 +00:00
|
|
|
db_printf(",");
|
1994-05-24 10:09:53 +00:00
|
|
|
count++;
|
|
|
|
|
2002-11-07 23:03:04 +00:00
|
|
|
db_printf("(off=0x%jx,page=0x%jx)",
|
|
|
|
(uintmax_t)p->pindex, (uintmax_t)VM_PAGE_TO_PHYS(p));
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
if (count != 0)
|
1996-09-14 11:54:59 +00:00
|
|
|
db_printf("\n");
|
|
|
|
db_indent -= 2;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
1996-09-08 20:44:49 +00:00
|
|
|
|
1996-09-14 11:54:59 +00:00
|
|
|
/* XXX. */
|
|
|
|
#undef count
|
|
|
|
|
|
|
|
/* XXX need this non-static entry for calling from vm_map_print. */
|
1996-09-08 20:44:49 +00:00
|
|
|
void
|
2001-07-04 20:15:18 +00:00
|
|
|
vm_object_print(
|
|
|
|
/* db_expr_t */ long addr,
|
|
|
|
boolean_t have_addr,
|
|
|
|
/* db_expr_t */ long count,
|
|
|
|
char *modif)
|
1996-09-14 11:54:59 +00:00
|
|
|
{
|
|
|
|
vm_object_print_static(addr, have_addr, count, modif);
|
|
|
|
}
|
|
|
|
|
|
|
|
DB_SHOW_COMMAND(vmopag, vm_object_print_pages)
|
1996-09-08 20:44:49 +00:00
|
|
|
{
|
|
|
|
vm_object_t object;
|
|
|
|
int nl = 0;
|
|
|
|
int c;
|
2001-04-15 10:22:04 +00:00
|
|
|
|
|
|
|
TAILQ_FOREACH(object, &vm_object_list, object_list) {
|
1996-09-08 20:44:49 +00:00
|
|
|
vm_pindex_t idx, fidx;
|
|
|
|
vm_pindex_t osize;
|
2003-03-25 00:07:06 +00:00
|
|
|
vm_paddr_t pa = -1, padiff;
|
1996-09-08 20:44:49 +00:00
|
|
|
int rcount;
|
|
|
|
vm_page_t m;
|
|
|
|
|
1998-07-11 11:30:46 +00:00
|
|
|
db_printf("new object: %p\n", (void *)object);
|
2002-03-10 21:52:48 +00:00
|
|
|
if (nl > 18) {
|
1996-09-08 20:44:49 +00:00
|
|
|
c = cngetc();
|
|
|
|
if (c != ' ')
|
|
|
|
return;
|
|
|
|
nl = 0;
|
|
|
|
}
|
|
|
|
nl++;
|
|
|
|
rcount = 0;
|
|
|
|
fidx = 0;
|
|
|
|
osize = object->size;
|
|
|
|
if (osize > 128)
|
|
|
|
osize = 128;
|
2001-07-04 19:00:13 +00:00
|
|
|
for (idx = 0; idx < osize; idx++) {
|
1996-09-08 20:44:49 +00:00
|
|
|
m = vm_page_lookup(object, idx);
|
|
|
|
if (m == NULL) {
|
|
|
|
if (rcount) {
|
1999-07-01 19:53:43 +00:00
|
|
|
db_printf(" index(%ld)run(%d)pa(0x%lx)\n",
|
|
|
|
(long)fidx, rcount, (long)pa);
|
2002-03-10 21:52:48 +00:00
|
|
|
if (nl > 18) {
|
1996-09-08 20:44:49 +00:00
|
|
|
c = cngetc();
|
|
|
|
if (c != ' ')
|
|
|
|
return;
|
|
|
|
nl = 0;
|
|
|
|
}
|
|
|
|
nl++;
|
|
|
|
rcount = 0;
|
|
|
|
}
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
if (rcount &&
|
|
|
|
(VM_PAGE_TO_PHYS(m) == pa + rcount * PAGE_SIZE)) {
|
|
|
|
++rcount;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (rcount) {
|
|
|
|
padiff = pa + rcount * PAGE_SIZE - VM_PAGE_TO_PHYS(m);
|
|
|
|
padiff >>= PAGE_SHIFT;
|
|
|
|
padiff &= PQ_L2_MASK;
|
|
|
|
if (padiff == 0) {
|
|
|
|
pa = VM_PAGE_TO_PHYS(m) - rcount * PAGE_SIZE;
|
|
|
|
++rcount;
|
|
|
|
continue;
|
|
|
|
}
|
1999-07-01 19:53:43 +00:00
|
|
|
db_printf(" index(%ld)run(%d)pa(0x%lx)",
|
|
|
|
(long)fidx, rcount, (long)pa);
|
|
|
|
db_printf("pd(%ld)\n", (long)padiff);
|
2002-03-10 21:52:48 +00:00
|
|
|
if (nl > 18) {
|
1996-09-08 20:44:49 +00:00
|
|
|
c = cngetc();
|
|
|
|
if (c != ' ')
|
|
|
|
return;
|
|
|
|
nl = 0;
|
|
|
|
}
|
|
|
|
nl++;
|
|
|
|
}
|
|
|
|
fidx = idx;
|
|
|
|
pa = VM_PAGE_TO_PHYS(m);
|
|
|
|
rcount = 1;
|
|
|
|
}
|
|
|
|
if (rcount) {
|
1999-07-01 19:53:43 +00:00
|
|
|
db_printf(" index(%ld)run(%d)pa(0x%lx)\n",
|
|
|
|
(long)fidx, rcount, (long)pa);
|
2002-03-10 21:52:48 +00:00
|
|
|
if (nl > 18) {
|
1996-09-08 20:44:49 +00:00
|
|
|
c = cngetc();
|
|
|
|
if (c != ' ')
|
|
|
|
return;
|
|
|
|
nl = 0;
|
|
|
|
}
|
|
|
|
nl++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
1995-04-16 12:56:22 +00:00
|
|
|
#endif /* DDB */
|