Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2009 The FreeBSD Foundation
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This software was developed by Rui Paulo under sponsorship from the
|
|
|
|
* FreeBSD Foundation.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IEEE 802.11s Hybrid Wireless Mesh Protocol, HWMP.
|
|
|
|
*
|
|
|
|
* Based on March 2009, D3.0 802.11s draft spec.
|
|
|
|
*/
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include "opt_wlan.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_llc.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
|
|
|
|
#include <net/bpf.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_action.h>
|
|
|
|
#include <net80211/ieee80211_input.h>
|
|
|
|
#include <net80211/ieee80211_mesh.h>
|
|
|
|
|
|
|
|
static void hwmp_vattach(struct ieee80211vap *);
|
|
|
|
static void hwmp_vdetach(struct ieee80211vap *);
|
|
|
|
static int hwmp_newstate(struct ieee80211vap *,
|
|
|
|
enum ieee80211_state, int);
|
|
|
|
static int hwmp_send_action(struct ieee80211_node *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
uint8_t *, size_t);
|
|
|
|
static uint8_t * hwmp_add_meshpreq(uint8_t *,
|
|
|
|
const struct ieee80211_meshpreq_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshprep(uint8_t *,
|
|
|
|
const struct ieee80211_meshprep_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshperr(uint8_t *,
|
|
|
|
const struct ieee80211_meshperr_ie *);
|
|
|
|
static uint8_t * hwmp_add_meshrann(uint8_t *,
|
|
|
|
const struct ieee80211_meshrann_ie *);
|
|
|
|
static void hwmp_rootmode_setup(struct ieee80211vap *);
|
|
|
|
static void hwmp_rootmode_cb(void *);
|
|
|
|
static void hwmp_rootmode_rann_cb(void *);
|
|
|
|
static void hwmp_recv_preq(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshpreq_ie *);
|
|
|
|
static int hwmp_send_preq(struct ieee80211_node *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshpreq_ie *);
|
|
|
|
static void hwmp_recv_prep(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshprep_ie *);
|
|
|
|
static int hwmp_send_prep(struct ieee80211_node *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshprep_ie *);
|
|
|
|
static void hwmp_recv_perr(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshperr_ie *);
|
|
|
|
static int hwmp_send_perr(struct ieee80211_node *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshperr_ie *);
|
|
|
|
static void hwmp_recv_rann(struct ieee80211vap *, struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_meshrann_ie *);
|
|
|
|
static int hwmp_send_rann(struct ieee80211_node *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshrann_ie *);
|
|
|
|
static struct ieee80211_node *
|
|
|
|
hwmp_discover(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN], struct mbuf *);
|
|
|
|
static void hwmp_peerdown(struct ieee80211_node *);
|
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
static struct timeval ieee80211_hwmp_preqminint = { 0, 100000 };
|
|
|
|
static struct timeval ieee80211_hwmp_perrminint = { 0, 100000 };
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/* unalligned little endian access */
|
|
|
|
#define LE_WRITE_2(p, v) do { \
|
|
|
|
((uint8_t *)(p))[0] = (v) & 0xff; \
|
|
|
|
((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \
|
|
|
|
} while (0)
|
|
|
|
#define LE_WRITE_4(p, v) do { \
|
|
|
|
((uint8_t *)(p))[0] = (v) & 0xff; \
|
|
|
|
((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \
|
|
|
|
((uint8_t *)(p))[2] = ((v) >> 16) & 0xff; \
|
|
|
|
((uint8_t *)(p))[3] = ((v) >> 24) & 0xff; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
|
|
|
|
/* NB: the Target Address set in a Proactive PREQ is the broadcast address. */
|
|
|
|
static const uint8_t broadcastaddr[IEEE80211_ADDR_LEN] =
|
|
|
|
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
|
|
|
|
|
|
typedef uint32_t ieee80211_hwmp_seq;
|
2009-07-27 14:22:09 +00:00
|
|
|
#define HWMP_SEQ_LT(a, b) ((int32_t)((a)-(b)) < 0)
|
|
|
|
#define HWMP_SEQ_LEQ(a, b) ((int32_t)((a)-(b)) <= 0)
|
|
|
|
#define HWMP_SEQ_GT(a, b) ((int32_t)((a)-(b)) > 0)
|
|
|
|
#define HWMP_SEQ_GEQ(a, b) ((int32_t)((a)-(b)) >= 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Private extension of ieee80211_mesh_route.
|
|
|
|
*/
|
|
|
|
struct ieee80211_hwmp_route {
|
2009-07-27 14:22:09 +00:00
|
|
|
ieee80211_hwmp_seq hr_seq; /* last HWMP seq seen from dst*/
|
|
|
|
ieee80211_hwmp_seq hr_preqid; /* last PREQ ID seen from dst */
|
|
|
|
ieee80211_hwmp_seq hr_targetseq; /* seq. no. on our latest PREQ*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
int hr_preqretries;
|
|
|
|
};
|
|
|
|
struct ieee80211_hwmp_state {
|
|
|
|
ieee80211_hwmp_seq hs_seq; /* next seq to be used */
|
|
|
|
ieee80211_hwmp_seq hs_preqid; /* next PREQ ID to be used */
|
|
|
|
struct timeval hs_lastpreq; /* last time we sent a PREQ */
|
|
|
|
struct timeval hs_lastperr; /* last time we sent a PERR */
|
|
|
|
int hs_rootmode; /* proactive HWMP */
|
|
|
|
struct callout hs_roottimer;
|
|
|
|
uint8_t hs_maxhops; /* max hop count */
|
|
|
|
};
|
|
|
|
|
|
|
|
SYSCTL_NODE(_net_wlan, OID_AUTO, hwmp, CTLFLAG_RD, 0,
|
|
|
|
"IEEE 802.11s HWMP parameters");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_targetonly = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
SYSCTL_INT(_net_wlan_hwmp, OID_AUTO, targetonly, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_targetonly, 0, "Set TO bit on generated PREQs");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_replyforward = 1;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
SYSCTL_INT(_net_wlan_hwmp, OID_AUTO, replyforward, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_replyforward, 0, "Set RF bit on generated PREQs");
|
2009-07-21 19:38:22 +00:00
|
|
|
static int ieee80211_hwmp_pathtimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, pathlifetime, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_pathtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"path entry lifetime (ms)");
|
|
|
|
static int ieee80211_hwmp_roottimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, roottimeout, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_roottimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root PREQ timeout (ms)");
|
|
|
|
static int ieee80211_hwmp_rootint = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, rootint, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_rootint, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root interval (ms)");
|
|
|
|
static int ieee80211_hwmp_rannint = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, rannint, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_hwmp_rannint, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"root announcement interval (ms)");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
#define IEEE80211_HWMP_DEFAULT_MAXHOPS 31
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
static ieee80211_recv_action_func hwmp_recv_action_meshpath;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
static struct ieee80211_mesh_proto_path mesh_proto_hwmp = {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
.mpp_descr = "HWMP",
|
|
|
|
.mpp_ie = IEEE80211_MESHCONF_HWMP,
|
|
|
|
.mpp_discover = hwmp_discover,
|
|
|
|
.mpp_peerdown = hwmp_peerdown,
|
|
|
|
.mpp_vattach = hwmp_vattach,
|
|
|
|
.mpp_vdetach = hwmp_vdetach,
|
|
|
|
.mpp_newstate = hwmp_newstate,
|
|
|
|
.mpp_privlen = sizeof(struct ieee80211_hwmp_route),
|
|
|
|
};
|
2009-07-21 19:38:22 +00:00
|
|
|
SYSCTL_PROC(_net_wlan_hwmp, OID_AUTO, inact, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&mesh_proto_hwmp.mpp_inact, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"mesh route inactivity timeout (ms)");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
ieee80211_hwmp_init(void)
|
|
|
|
{
|
2009-07-21 19:38:22 +00:00
|
|
|
ieee80211_hwmp_pathtimeout = msecs_to_ticks(5*1000);
|
|
|
|
ieee80211_hwmp_roottimeout = msecs_to_ticks(5*1000);
|
|
|
|
ieee80211_hwmp_rootint = msecs_to_ticks(2*1000);
|
|
|
|
ieee80211_hwmp_rannint = msecs_to_ticks(1*1000);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
2009-09-22 18:18:14 +00:00
|
|
|
* Register action frame handler.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHPATH,
|
2009-09-22 18:18:14 +00:00
|
|
|
IEEE80211_ACTION_MESHPATH_SEL, hwmp_recv_action_meshpath);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-21 19:38:22 +00:00
|
|
|
/* NB: default is 5 secs per spec */
|
|
|
|
mesh_proto_hwmp.mpp_inact = msecs_to_ticks(5*1000);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Register HWMP.
|
|
|
|
*/
|
|
|
|
ieee80211_mesh_register_proto_path(&mesh_proto_hwmp);
|
|
|
|
}
|
|
|
|
SYSINIT(wlan_hwmp, SI_SUB_DRIVERS, SI_ORDER_SECOND, ieee80211_hwmp_init, NULL);
|
|
|
|
|
|
|
|
void
|
|
|
|
hwmp_vattach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs;
|
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS,
|
|
|
|
("not a mesh vap, opmode %d", vap->iv_opmode));
|
|
|
|
|
|
|
|
hs = malloc(sizeof(struct ieee80211_hwmp_state), M_80211_VAP,
|
|
|
|
M_NOWAIT | M_ZERO);
|
|
|
|
if (hs == NULL) {
|
|
|
|
printf("%s: couldn't alloc HWMP state\n", __func__);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
hs->hs_maxhops = IEEE80211_HWMP_DEFAULT_MAXHOPS;
|
|
|
|
callout_init(&hs->hs_roottimer, CALLOUT_MPSAFE);
|
|
|
|
vap->iv_hwmp = hs;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
hwmp_vdetach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_drain(&hs->hs_roottimer);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
free(vap->iv_hwmp, M_80211_VAP);
|
|
|
|
vap->iv_hwmp = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
hwmp_newstate(struct ieee80211vap *vap, enum ieee80211_state ostate, int arg)
|
|
|
|
{
|
|
|
|
enum ieee80211_state nstate = vap->iv_state;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
|
|
|
|
__func__, ieee80211_state_name[ostate],
|
|
|
|
ieee80211_state_name[nstate], arg);
|
|
|
|
|
|
|
|
if (nstate != IEEE80211_S_RUN && ostate == IEEE80211_S_RUN)
|
|
|
|
callout_drain(&hs->hs_roottimer);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (nstate == IEEE80211_S_RUN)
|
|
|
|
hwmp_rootmode_setup(vap);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2009-09-22 18:18:14 +00:00
|
|
|
hwmp_recv_action_meshpath(struct ieee80211_node *ni,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_meshpreq_ie preq;
|
2009-09-22 18:18:14 +00:00
|
|
|
struct ieee80211_meshprep_ie prep;
|
|
|
|
struct ieee80211_meshperr_ie perr;
|
|
|
|
struct ieee80211_meshrann_ie rann;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t *iefrm = frm + 2; /* action + code */
|
2009-09-22 18:18:14 +00:00
|
|
|
int found = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
while (efrm - iefrm > 1) {
|
|
|
|
IEEE80211_VERIFY_LENGTH(efrm - iefrm, iefrm[1] + 2, return 0);
|
2009-09-22 18:18:14 +00:00
|
|
|
switch (*iefrm) {
|
|
|
|
case IEEE80211_ELEMID_MESHPREQ:
|
|
|
|
{
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_meshpreq_ie *mpreq =
|
|
|
|
(const struct ieee80211_meshpreq_ie *) iefrm;
|
|
|
|
/* XXX > 1 target */
|
|
|
|
if (mpreq->preq_len !=
|
|
|
|
sizeof(struct ieee80211_meshpreq_ie) - 2) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PREQ with wrong len");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
memcpy(&preq, mpreq, sizeof(preq));
|
|
|
|
preq.preq_id = LE_READ_4(&mpreq->preq_id);
|
|
|
|
preq.preq_origseq = LE_READ_4(&mpreq->preq_origseq);
|
|
|
|
preq.preq_lifetime = LE_READ_4(&mpreq->preq_lifetime);
|
|
|
|
preq.preq_metric = LE_READ_4(&mpreq->preq_metric);
|
|
|
|
preq.preq_targets[0].target_seq =
|
|
|
|
LE_READ_4(&mpreq->preq_targets[0].target_seq);
|
|
|
|
hwmp_recv_preq(vap, ni, wh, &preq);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHPREP:
|
|
|
|
{
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_meshprep_ie *mprep =
|
|
|
|
(const struct ieee80211_meshprep_ie *) iefrm;
|
|
|
|
if (mprep->prep_len !=
|
|
|
|
sizeof(struct ieee80211_meshprep_ie) - 2) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PREP with wrong len");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
memcpy(&prep, mprep, sizeof(prep));
|
|
|
|
prep.prep_targetseq = LE_READ_4(&mprep->prep_targetseq);
|
|
|
|
prep.prep_lifetime = LE_READ_4(&mprep->prep_lifetime);
|
|
|
|
prep.prep_metric = LE_READ_4(&mprep->prep_metric);
|
|
|
|
prep.prep_origseq = LE_READ_4(&mprep->prep_origseq);
|
|
|
|
hwmp_recv_prep(vap, ni, wh, &prep);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHPERR:
|
|
|
|
{
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_meshperr_ie *mperr =
|
|
|
|
(const struct ieee80211_meshperr_ie *) iefrm;
|
|
|
|
/* XXX > 1 target */
|
|
|
|
if (mperr->perr_len !=
|
|
|
|
sizeof(struct ieee80211_meshperr_ie) - 2) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PERR with wrong len");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2009-09-22 18:18:14 +00:00
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
memcpy(&perr, mperr, sizeof(perr));
|
|
|
|
perr.perr_dests[0].dest_seq =
|
|
|
|
LE_READ_4(&mperr->perr_dests[0].dest_seq);
|
|
|
|
hwmp_recv_perr(vap, ni, wh, &perr);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
case IEEE80211_ELEMID_MESHRANN:
|
|
|
|
{
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const struct ieee80211_meshrann_ie *mrann =
|
|
|
|
(const struct ieee80211_meshrann_ie *) iefrm;
|
|
|
|
if (mrann->rann_len !=
|
|
|
|
sizeof(struct ieee80211_meshrann_ie) - 2) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "RAN with wrong len");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
memcpy(&rann, mrann, sizeof(rann));
|
|
|
|
rann.rann_seq = LE_READ_4(&mrann->rann_seq);
|
|
|
|
rann.rann_metric = LE_READ_4(&mrann->rann_metric);
|
|
|
|
hwmp_recv_rann(vap, ni, wh, &rann);
|
2009-09-22 18:18:14 +00:00
|
|
|
found++;
|
|
|
|
break;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
iefrm += iefrm[1] + 2;
|
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
if (!found) {
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_HWMP,
|
|
|
|
wh, NULL, "%s", "PATH SEL action without IE");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_send_action(struct ieee80211_node *ni,
|
|
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
uint8_t *ie, size_t len)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
struct ieee80211_bpf_params params;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
if (vap->iv_state == IEEE80211_S_CAC) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni,
|
|
|
|
"block %s frame in CAC state", "HWMP action");
|
|
|
|
vap->iv_stats.is_tx_badstate++;
|
|
|
|
return EIO; /* XXX */
|
|
|
|
}
|
|
|
|
|
|
|
|
KASSERT(ni != NULL, ("null node"));
|
|
|
|
/*
|
|
|
|
* Hold a reference on the node so it doesn't go away until after
|
|
|
|
* the xmit is complete all the way in the driver. On error we
|
|
|
|
* will remove our reference.
|
|
|
|
*/
|
|
|
|
#ifdef IEEE80211_DEBUG_REFCNT
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n",
|
|
|
|
__func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr),
|
|
|
|
ieee80211_node_refcnt(ni)+1);
|
|
|
|
#endif
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(struct ieee80211_action) + len
|
|
|
|
);
|
|
|
|
if (m == NULL) {
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
*frm++ = IEEE80211_ACTION_CAT_MESHPATH;
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = IEEE80211_ACTION_MESHPATH_SEL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
switch (*ie) {
|
|
|
|
case IEEE80211_ELEMID_MESHPREQ:
|
|
|
|
frm = hwmp_add_meshpreq(frm,
|
|
|
|
(struct ieee80211_meshpreq_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHPREP:
|
|
|
|
frm = hwmp_add_meshprep(frm,
|
|
|
|
(struct ieee80211_meshprep_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHPERR:
|
|
|
|
frm = hwmp_add_meshperr(frm,
|
|
|
|
(struct ieee80211_meshperr_ie *)ie);
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHRANN:
|
|
|
|
frm = hwmp_add_meshrann(frm,
|
|
|
|
(struct ieee80211_meshrann_ie *)ie);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT);
|
|
|
|
if (m == NULL) {
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
ieee80211_send_setup(ni, m,
|
|
|
|
IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_ACTION,
|
|
|
|
IEEE80211_NONQOS_TID, sa, da, sa);
|
|
|
|
|
|
|
|
m->m_flags |= M_ENCAP; /* mark encapsulated */
|
|
|
|
IEEE80211_NODE_STAT(ni, tx_mgmt);
|
|
|
|
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
params.ibp_pri = WME_AC_VO;
|
|
|
|
params.ibp_rate0 = ni->ni_txparms->mgmtrate;
|
|
|
|
if (IEEE80211_IS_MULTICAST(da))
|
|
|
|
params.ibp_try0 = 1;
|
|
|
|
else
|
|
|
|
params.ibp_try0 = ni->ni_txparms->maxretry;
|
|
|
|
params.ibp_power = ni->ni_txpower;
|
|
|
|
return ic->ic_raw_xmit(ni, m, ¶ms);
|
|
|
|
}
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
#define ADDSHORT(frm, v) do { \
|
|
|
|
frm[0] = (v) & 0xff; \
|
|
|
|
frm[1] = (v) >> 8; \
|
|
|
|
frm += 2; \
|
|
|
|
} while (0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define ADDWORD(frm, v) do { \
|
|
|
|
LE_WRITE_4(frm, v); \
|
|
|
|
frm += 4; \
|
|
|
|
} while (0)
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Request IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshpreq(uint8_t *frm, const struct ieee80211_meshpreq_ie *preq)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPREQ;
|
|
|
|
*frm++ = sizeof(struct ieee80211_meshpreq_ie) - 2 +
|
|
|
|
(preq->preq_tcount - 1) * sizeof(*preq->preq_targets);
|
|
|
|
*frm++ = preq->preq_flags;
|
|
|
|
*frm++ = preq->preq_hopcount;
|
|
|
|
*frm++ = preq->preq_ttl;
|
|
|
|
ADDWORD(frm, preq->preq_id);
|
|
|
|
IEEE80211_ADDR_COPY(frm, preq->preq_origaddr); frm += 6;
|
|
|
|
ADDWORD(frm, preq->preq_origseq);
|
|
|
|
ADDWORD(frm, preq->preq_lifetime);
|
|
|
|
ADDWORD(frm, preq->preq_metric);
|
|
|
|
*frm++ = preq->preq_tcount;
|
|
|
|
for (i = 0; i < preq->preq_tcount; i++) {
|
|
|
|
*frm++ = preq->preq_targets[i].target_flags;
|
|
|
|
IEEE80211_ADDR_COPY(frm, preq->preq_targets[i].target_addr);
|
|
|
|
frm += 6;
|
|
|
|
ADDWORD(frm, preq->preq_targets[i].target_seq);
|
|
|
|
}
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Reply IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshprep(uint8_t *frm, const struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPREP;
|
|
|
|
*frm++ = sizeof(struct ieee80211_meshprep_ie) - 2;
|
|
|
|
*frm++ = prep->prep_flags;
|
|
|
|
*frm++ = prep->prep_hopcount;
|
|
|
|
*frm++ = prep->prep_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(frm, prep->prep_targetaddr); frm += 6;
|
|
|
|
ADDWORD(frm, prep->prep_targetseq);
|
|
|
|
ADDWORD(frm, prep->prep_lifetime);
|
|
|
|
ADDWORD(frm, prep->prep_metric);
|
|
|
|
IEEE80211_ADDR_COPY(frm, prep->prep_origaddr); frm += 6;
|
|
|
|
ADDWORD(frm, prep->prep_origseq);
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Path Error IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshperr(uint8_t *frm, const struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPERR;
|
|
|
|
*frm++ = sizeof(struct ieee80211_meshperr_ie) - 2 +
|
|
|
|
(perr->perr_ndests - 1) * sizeof(*perr->perr_dests);
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = perr->perr_ttl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*frm++ = perr->perr_ndests;
|
|
|
|
for (i = 0; i < perr->perr_ndests; i++) {
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm += perr->perr_dests[i].dest_flags;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(frm, perr->perr_dests[i].dest_addr);
|
|
|
|
frm += 6;
|
|
|
|
ADDWORD(frm, perr->perr_dests[i].dest_seq);
|
2009-09-22 18:18:14 +00:00
|
|
|
ADDSHORT(frm, perr->perr_dests[i].dest_rcode);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Root Annoucement IE to a frame.
|
|
|
|
*/
|
|
|
|
static uint8_t *
|
|
|
|
hwmp_add_meshrann(uint8_t *frm, const struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHRANN;
|
|
|
|
*frm++ = sizeof(struct ieee80211_meshrann_ie) - 2;
|
|
|
|
*frm++ = rann->rann_flags;
|
|
|
|
*frm++ = rann->rann_hopcount;
|
|
|
|
*frm++ = rann->rann_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(frm, rann->rann_addr); frm += 6;
|
|
|
|
ADDWORD(frm, rann->rann_seq);
|
|
|
|
ADDWORD(frm, rann->rann_metric);
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_setup(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
|
|
|
|
switch (hs->hs_rootmode) {
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_DISABLED:
|
|
|
|
callout_drain(&hs->hs_roottimer);
|
|
|
|
break;
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_NORMAL:
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_PROACTIVE:
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&hs->hs_roottimer, ieee80211_hwmp_rootint,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_cb, vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_HWMP_ROOTMODE_RANN:
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&hs->hs_roottimer, ieee80211_hwmp_rannint,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_rootmode_rann_cb, vap);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send a broadcast Path Request to find all nodes on the mesh. We are
|
|
|
|
* called when the vap is configured as a HWMP root node.
|
|
|
|
*/
|
|
|
|
#define PREQ_TFLAGS(n) preq.preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq.preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq.preq_targets[n].target_seq
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = (struct ieee80211vap *)arg;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_meshpreq_ie preq;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, vap->iv_bss,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "send broadcast PREQ");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
preq.preq_flags = IEEE80211_MESHPREQ_FLAGS_AM;
|
2009-07-27 14:22:09 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_PORTAL)
|
|
|
|
preq.preq_flags |= IEEE80211_MESHPREQ_FLAGS_PR;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (hs->hs_rootmode == IEEE80211_HWMP_ROOTMODE_PROACTIVE)
|
|
|
|
preq.preq_flags |= IEEE80211_MESHPREQ_FLAGS_PP;
|
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
|
|
|
preq.preq_id = ++hs->hs_preqid;
|
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
|
|
|
preq.preq_origseq = ++hs->hs_seq;
|
2009-07-21 19:38:22 +00:00
|
|
|
preq.preq_lifetime = ticks_to_msecs(ieee80211_hwmp_roottimeout);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
preq.preq_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
preq.preq_tcount = 1;
|
|
|
|
IEEE80211_ADDR_COPY(PREQ_TADDR(0), broadcastaddr);
|
|
|
|
PREQ_TFLAGS(0) = IEEE80211_MESHPREQ_TFLAGS_TO |
|
|
|
|
IEEE80211_MESHPREQ_TFLAGS_RF;
|
|
|
|
PREQ_TSEQ(0) = 0;
|
|
|
|
vap->iv_stats.is_hwmp_rootreqs++;
|
|
|
|
hwmp_send_preq(vap->iv_bss, vap->iv_myaddr, broadcastaddr, &preq);
|
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send a Root Annoucement (RANN) to find all the nodes on the mesh. We are
|
|
|
|
* called when the vap is configured as a HWMP RANN root node.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
hwmp_rootmode_rann_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = (struct ieee80211vap *)arg;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_meshrann_ie rann;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, vap->iv_bss,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "send broadcast RANN");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_PORTAL)
|
|
|
|
rann.rann_flags |= IEEE80211_MESHRANN_FLAGS_PR;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rann.rann_hopcount = 0;
|
|
|
|
rann.rann_ttl = ms->ms_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(rann.rann_addr, vap->iv_myaddr);
|
|
|
|
rann.rann_seq = ++hs->hs_seq;
|
|
|
|
rann.rann_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
|
|
|
|
vap->iv_stats.is_hwmp_rootrann++;
|
|
|
|
hwmp_send_rann(vap->iv_bss, vap->iv_myaddr, broadcastaddr, &rann);
|
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define PREQ_TFLAGS(n) preq->preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq->preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq->preq_targets[n].target_seq
|
|
|
|
static void
|
|
|
|
hwmp_recv_preq(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshpreq_ie *preq)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
2009-07-27 14:22:09 +00:00
|
|
|
struct ieee80211_mesh_route *rtorig = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hrorig;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_meshprep_ie prep;
|
|
|
|
|
|
|
|
if (ni == vap->iv_bss ||
|
|
|
|
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
|
|
|
|
return;
|
|
|
|
/*
|
|
|
|
* Ignore PREQs from us. Could happen because someone forward it
|
|
|
|
* back to us.
|
|
|
|
*/
|
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, preq->preq_origaddr))
|
|
|
|
return;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"received PREQ, source %s", ether_sprintf(preq->preq_origaddr));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acceptance criteria: if the PREQ is not for us and
|
|
|
|
* forwarding is disabled, discard this PREQ.
|
|
|
|
*/
|
|
|
|
if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, PREQ_TADDR(0)) &&
|
|
|
|
!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_HWMP,
|
|
|
|
preq->preq_origaddr, NULL, "%s", "not accepting PREQ");
|
|
|
|
return;
|
|
|
|
}
|
2009-07-27 14:22:09 +00:00
|
|
|
rtorig = ieee80211_mesh_rt_find(vap, preq->preq_origaddr);
|
|
|
|
if (rtorig == NULL)
|
|
|
|
rtorig = ieee80211_mesh_rt_add(vap, preq->preq_origaddr);
|
|
|
|
hrorig = IEEE80211_MESH_ROUTE_PRIV(rtorig, struct ieee80211_hwmp_route);
|
|
|
|
/*
|
|
|
|
* Sequence number validation.
|
|
|
|
*/
|
|
|
|
if (HWMP_SEQ_LEQ(preq->preq_id, hrorig->hr_preqid) &&
|
|
|
|
HWMP_SEQ_LEQ(preq->preq_origseq, hrorig->hr_seq)) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"discard PREQ from %s, old seq no %u <= %u",
|
|
|
|
ether_sprintf(preq->preq_origaddr),
|
|
|
|
preq->preq_origseq, hrorig->hr_seq);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
hrorig->hr_preqid = preq->preq_id;
|
|
|
|
hrorig->hr_seq = preq->preq_origseq;
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Check if the PREQ is addressed to us.
|
|
|
|
*/
|
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, PREQ_TADDR(0))) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"reply to %s", ether_sprintf(preq->preq_origaddr));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Build and send a PREP frame.
|
|
|
|
*/
|
|
|
|
prep.prep_flags = 0;
|
|
|
|
prep.prep_hopcount = 0;
|
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(prep.prep_targetaddr, preq->preq_origaddr);
|
|
|
|
prep.prep_targetseq = preq->preq_origseq;
|
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
|
|
|
prep.prep_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
IEEE80211_ADDR_COPY(prep.prep_origaddr, vap->iv_myaddr);
|
|
|
|
prep.prep_origseq = ++hs->hs_seq;
|
|
|
|
hwmp_send_prep(ni, vap->iv_myaddr, wh->i_addr2, &prep);
|
|
|
|
/*
|
|
|
|
* Build the reverse path, if we don't have it already.
|
|
|
|
*/
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, preq->preq_origaddr);
|
|
|
|
if (rt == NULL)
|
|
|
|
hwmp_discover(vap, preq->preq_origaddr, NULL);
|
2009-07-20 19:12:08 +00:00
|
|
|
else if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_discover(vap, rt->rt_dest, NULL);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Proactive PREQ: reply with a proactive PREP to the
|
|
|
|
* root STA if requested.
|
|
|
|
*/
|
|
|
|
if (IEEE80211_ADDR_EQ(PREQ_TADDR(0), broadcastaddr) &&
|
|
|
|
(PREQ_TFLAGS(0) &
|
|
|
|
((IEEE80211_MESHPREQ_TFLAGS_TO|IEEE80211_MESHPREQ_TFLAGS_RF) ==
|
|
|
|
(IEEE80211_MESHPREQ_TFLAGS_TO|IEEE80211_MESHPREQ_TFLAGS_RF)))) {
|
|
|
|
uint8_t rootmac[IEEE80211_ADDR_LEN];
|
|
|
|
|
|
|
|
IEEE80211_ADDR_COPY(rootmac, preq->preq_origaddr);
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, rootmac);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt == NULL) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt = ieee80211_mesh_rt_add(vap, rootmac);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"unable to add root mesh path to %s",
|
|
|
|
ether_sprintf(rootmac));
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"root mesh station @ %s", ether_sprintf(rootmac));
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Reply with a PREP if we don't have a path to the root
|
|
|
|
* or if the root sent us a proactive PREQ.
|
|
|
|
*/
|
2009-07-20 19:12:08 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0 ||
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
(preq->preq_flags & IEEE80211_MESHPREQ_FLAGS_PP)) {
|
|
|
|
prep.prep_flags = 0;
|
|
|
|
prep.prep_hopcount = 0;
|
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_origaddr, vap->iv_myaddr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_origseq = preq->preq_origseq;
|
|
|
|
prep.prep_targetseq = ++hs->hs_seq;
|
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
|
|
|
prep.prep_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_ADDR_COPY(prep.prep_targetaddr, rootmac);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_targetseq = PREQ_TSEQ(0);
|
|
|
|
hwmp_send_prep(vap->iv_bss, vap->iv_myaddr,
|
|
|
|
broadcastaddr, &prep);
|
|
|
|
}
|
|
|
|
hwmp_discover(vap, rootmac, NULL);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, PREQ_TADDR(0));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Forwarding and Intermediate reply for PREQs with 1 target.
|
|
|
|
*/
|
|
|
|
if (preq->preq_tcount == 1) {
|
|
|
|
struct ieee80211_meshpreq_ie ppreq; /* propagated PREQ */
|
|
|
|
|
|
|
|
memcpy(&ppreq, preq, sizeof(ppreq));
|
|
|
|
/*
|
|
|
|
* We have a valid route to this node.
|
|
|
|
*/
|
|
|
|
if (rt != NULL &&
|
2009-07-20 19:12:08 +00:00
|
|
|
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (preq->preq_ttl > 1 &&
|
|
|
|
preq->preq_hopcount < hs->hs_maxhops) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"forward PREQ from %s",
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ether_sprintf(preq->preq_origaddr));
|
|
|
|
/*
|
|
|
|
* Propagate the original PREQ.
|
|
|
|
*/
|
|
|
|
ppreq.preq_hopcount += 1;
|
|
|
|
ppreq.preq_ttl -= 1;
|
|
|
|
ppreq.preq_metric +=
|
|
|
|
ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
/*
|
|
|
|
* Set TO and unset RF bits because we are going
|
|
|
|
* to send a PREP next.
|
|
|
|
*/
|
|
|
|
ppreq.preq_targets[0].target_flags |=
|
|
|
|
IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
ppreq.preq_targets[0].target_flags &=
|
|
|
|
~IEEE80211_MESHPREQ_TFLAGS_RF;
|
|
|
|
hwmp_send_preq(ni, vap->iv_myaddr,
|
|
|
|
broadcastaddr, &ppreq);
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Check if we can send an intermediate Path Reply,
|
|
|
|
* i.e., Target Only bit is not set.
|
|
|
|
*/
|
|
|
|
if (!(PREQ_TFLAGS(0) & IEEE80211_MESHPREQ_TFLAGS_TO)) {
|
|
|
|
struct ieee80211_meshprep_ie prep;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"intermediate reply for PREQ from %s",
|
|
|
|
ether_sprintf(preq->preq_origaddr));
|
|
|
|
prep.prep_flags = 0;
|
|
|
|
prep.prep_hopcount = rt->rt_nhops + 1;
|
|
|
|
prep.prep_ttl = ms->ms_ttl;
|
|
|
|
IEEE80211_ADDR_COPY(&prep.prep_targetaddr,
|
|
|
|
preq->preq_origaddr);
|
2009-07-27 14:22:09 +00:00
|
|
|
prep.prep_targetseq = hrorig->hr_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
prep.prep_lifetime = preq->preq_lifetime;
|
|
|
|
prep.prep_metric = rt->rt_metric +
|
|
|
|
ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
IEEE80211_ADDR_COPY(&prep.prep_origaddr,
|
|
|
|
PREQ_TADDR(0));
|
2009-07-27 14:22:09 +00:00
|
|
|
prep.prep_origseq = hrorig->hr_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_send_prep(ni, vap->iv_myaddr,
|
|
|
|
broadcastaddr, &prep);
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* We have no information about this path,
|
|
|
|
* propagate the PREQ.
|
|
|
|
*/
|
|
|
|
} else if (preq->preq_ttl > 1 &&
|
|
|
|
preq->preq_hopcount < hs->hs_maxhops) {
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt == NULL) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt = ieee80211_mesh_rt_add(vap, PREQ_TADDR(0));
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP,
|
|
|
|
ni, "unable to add PREQ path to %s",
|
|
|
|
ether_sprintf(PREQ_TADDR(0)));
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt->rt_metric = preq->preq_metric;
|
|
|
|
rt->rt_lifetime = preq->preq_lifetime;
|
2009-07-27 14:22:09 +00:00
|
|
|
hrorig = IEEE80211_MESH_ROUTE_PRIV(rt,
|
|
|
|
struct ieee80211_hwmp_route);
|
|
|
|
hrorig->hr_seq = preq->preq_origseq;
|
|
|
|
hrorig->hr_preqid = preq->preq_id;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"forward PREQ from %s",
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ether_sprintf(preq->preq_origaddr));
|
|
|
|
ppreq.preq_hopcount += 1;
|
|
|
|
ppreq.preq_ttl -= 1;
|
|
|
|
ppreq.preq_metric += ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
hwmp_send_preq(ni, vap->iv_myaddr, broadcastaddr,
|
|
|
|
&ppreq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_send_preq(struct ieee80211_node *ni,
|
|
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshpreq_ie *preq)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = ni->ni_vap->iv_hwmp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enforce PREQ interval.
|
|
|
|
*/
|
|
|
|
if (ratecheck(&hs->hs_lastpreq, &ieee80211_hwmp_preqminint) == 0)
|
|
|
|
return EALREADY;
|
|
|
|
getmicrouptime(&hs->hs_lastpreq);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh preq action frame format
|
|
|
|
* [6] da
|
|
|
|
* [6] sa
|
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path request
|
|
|
|
*/
|
|
|
|
preq->preq_ie = IEEE80211_ELEMID_MESHPREQ;
|
|
|
|
return hwmp_send_action(ni, sa, da, (uint8_t *)preq,
|
|
|
|
sizeof(struct ieee80211_meshpreq_ie));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
hwmp_recv_prep(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
|
|
struct mbuf *m, *next;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acceptance criteria: if the corresponding PREQ was not generated
|
|
|
|
* by us and forwarding is disabled, discard this PREP.
|
|
|
|
*/
|
|
|
|
if (ni == vap->iv_bss ||
|
|
|
|
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
|
|
|
|
return;
|
|
|
|
if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, prep->prep_origaddr) &&
|
|
|
|
!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD))
|
|
|
|
return;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"received PREP from %s", ether_sprintf(prep->prep_origaddr));
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, prep->prep_origaddr);
|
|
|
|
if (rt == NULL) {
|
|
|
|
/*
|
|
|
|
* If we have no entry this could be a reply to a root PREQ.
|
|
|
|
*/
|
|
|
|
if (hs->hs_rootmode != IEEE80211_HWMP_ROOTMODE_DISABLED) {
|
|
|
|
rt = ieee80211_mesh_rt_add(vap, prep->prep_origaddr);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP,
|
|
|
|
ni, "unable to add PREP path to %s",
|
|
|
|
ether_sprintf(prep->prep_origaddr));
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(rt->rt_nexthop, wh->i_addr2);
|
|
|
|
rt->rt_nhops = prep->prep_hopcount;
|
|
|
|
rt->rt_lifetime = prep->prep_lifetime;
|
|
|
|
rt->rt_metric = prep->prep_metric;
|
2009-07-20 19:12:08 +00:00
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID;
|
2009-07-27 14:22:09 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"add root path to %s nhops %d metric %d (PREP)",
|
|
|
|
ether_sprintf(prep->prep_origaddr),
|
|
|
|
rt->rt_nhops, rt->rt_metric);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
2009-07-27 14:22:09 +00:00
|
|
|
/*
|
|
|
|
* Sequence number validation.
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
2009-07-27 14:22:09 +00:00
|
|
|
if (HWMP_SEQ_LEQ(prep->prep_origseq, hr->hr_seq)) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"discard PREP from %s, old seq no %u <= %u",
|
|
|
|
ether_sprintf(prep->prep_origaddr),
|
|
|
|
prep->prep_origseq, hr->hr_seq);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
hr->hr_seq = prep->prep_origseq;
|
|
|
|
/*
|
|
|
|
* If it's NOT for us, propagate the PREP.
|
|
|
|
*/
|
|
|
|
if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, prep->prep_targetaddr) &&
|
|
|
|
prep->prep_ttl > 1 && prep->prep_hopcount < hs->hs_maxhops) {
|
|
|
|
struct ieee80211_meshprep_ie pprep; /* propagated PREP */
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"propagate PREP from %s",
|
|
|
|
ether_sprintf(prep->prep_origaddr));
|
|
|
|
|
|
|
|
memcpy(&pprep, prep, sizeof(pprep));
|
|
|
|
pprep.prep_hopcount += 1;
|
|
|
|
pprep.prep_ttl -= 1;
|
|
|
|
pprep.prep_metric += ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
IEEE80211_ADDR_COPY(pprep.prep_origaddr, vap->iv_myaddr);
|
|
|
|
hwmp_send_prep(ni, vap->iv_myaddr, broadcastaddr, &pprep);
|
|
|
|
}
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) {
|
|
|
|
/* NB: never clobber a proxy entry */;
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"discard PREP for %s, route is marked PROXY",
|
|
|
|
ether_sprintf(prep->prep_origaddr));
|
|
|
|
vap->iv_stats.is_hwmp_proxy++;
|
|
|
|
} else if (prep->prep_targetseq == hr->hr_targetseq) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Check if we already have a path to this node.
|
|
|
|
* If we do, check if this path reply contains a
|
|
|
|
* better route.
|
|
|
|
*/
|
2009-07-27 14:22:09 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0 ||
|
|
|
|
(prep->prep_hopcount < rt->rt_nhops ||
|
|
|
|
prep->prep_metric < rt->rt_metric)) {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"%s path to %s, hopcount %d:%d metric %d:%d",
|
|
|
|
rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID ?
|
|
|
|
"prefer" : "update",
|
|
|
|
ether_sprintf(prep->prep_origaddr),
|
|
|
|
rt->rt_nhops, prep->prep_hopcount,
|
|
|
|
rt->rt_metric, prep->prep_metric);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(rt->rt_nexthop, wh->i_addr2);
|
|
|
|
rt->rt_nhops = prep->prep_hopcount;
|
|
|
|
rt->rt_lifetime = prep->prep_lifetime;
|
|
|
|
rt->rt_metric = prep->prep_metric;
|
2009-07-20 19:12:08 +00:00
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID;
|
2009-07-27 14:22:09 +00:00
|
|
|
} else {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"ignore PREP for %s, hopcount %d:%d metric %d:%d",
|
|
|
|
ether_sprintf(prep->prep_origaddr),
|
|
|
|
rt->rt_nhops, prep->prep_hopcount,
|
|
|
|
rt->rt_metric, prep->prep_metric);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-27 14:22:09 +00:00
|
|
|
"discard PREP for %s, wrong seqno %u != %u",
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ether_sprintf(prep->prep_origaddr), prep->prep_targetseq,
|
|
|
|
hr->hr_seq);
|
|
|
|
vap->iv_stats.is_hwmp_wrongseq++;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Check for frames queued awaiting path discovery.
|
|
|
|
* XXX probably can tell exactly and avoid remove call
|
|
|
|
* NB: hash may have false matches, if so they will get
|
|
|
|
* stuck back on the stageq because there won't be
|
|
|
|
* a path.
|
|
|
|
*/
|
|
|
|
m = ieee80211_ageq_remove(&ic->ic_stageq,
|
|
|
|
(struct ieee80211_node *)(uintptr_t)
|
|
|
|
ieee80211_mac_hash(ic, rt->rt_dest));
|
|
|
|
for (; m != NULL; m = next) {
|
|
|
|
next = m->m_nextpkt;
|
|
|
|
m->m_nextpkt = NULL;
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
|
|
|
"flush queued frame %p len %d", m, m->m_pkthdr.len);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ifp->if_transmit(ifp, m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_send_prep(struct ieee80211_node *ni,
|
|
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshprep_ie *prep)
|
|
|
|
{
|
2009-07-20 19:12:08 +00:00
|
|
|
/* NB: there's no PREP minimum interval. */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh prep action frame format
|
|
|
|
* [6] da
|
|
|
|
* [6] sa
|
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path reply
|
|
|
|
*/
|
|
|
|
prep->prep_ie = IEEE80211_ELEMID_MESHPREP;
|
|
|
|
return hwmp_send_action(ni, sa, da, (uint8_t *)prep,
|
|
|
|
sizeof(struct ieee80211_meshprep_ie));
|
|
|
|
}
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DFLAGS(n) perr.perr_dests[n].dest_flags
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define PERR_DADDR(n) perr.perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr.perr_dests[n].dest_seq
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DRCODE(n) perr.perr_dests[n].dest_rcode
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void
|
|
|
|
hwmp_peerdown(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
2009-09-22 18:18:14 +00:00
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshperr_ie perr;
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, ni->ni_macaddr);
|
|
|
|
if (rt == NULL)
|
|
|
|
return;
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"%s", "delete route entry");
|
2009-09-22 18:18:14 +00:00
|
|
|
perr.perr_ttl = ms->ms_ttl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
perr.perr_ndests = 1;
|
2009-09-22 18:18:14 +00:00
|
|
|
if (hr->hr_seq == 0)
|
|
|
|
PERR_DFLAGS(0) |= IEEE80211_MESHPERR_DFLAGS_USN;
|
|
|
|
PERR_DFLAGS(0) |= IEEE80211_MESHPERR_DFLAGS_RC;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(PERR_DADDR(0), rt->rt_dest);
|
|
|
|
PERR_DSEQ(0) = hr->hr_seq;
|
2009-09-22 18:18:14 +00:00
|
|
|
PERR_DRCODE(0) = IEEE80211_REASON_MESH_PERR_DEST_UNREACH;
|
2009-07-27 14:22:09 +00:00
|
|
|
/* NB: flush everything passing through peer */
|
|
|
|
ieee80211_mesh_rt_flush_peer(vap, ni->ni_macaddr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
hwmp_send_perr(vap->iv_bss, vap->iv_myaddr, broadcastaddr, &perr);
|
|
|
|
}
|
2009-09-22 18:18:14 +00:00
|
|
|
#undef PERR_DFLAGS
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#undef PERR_DADDR
|
|
|
|
#undef PERR_DSEQ
|
2009-09-22 18:18:14 +00:00
|
|
|
#undef PERR_DRCODE
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DFLAGS(n) perr->perr_dests[n].dest_flags
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define PERR_DADDR(n) perr->perr_dests[n].dest_addr
|
|
|
|
#define PERR_DSEQ(n) perr->perr_dests[n].dest_seq
|
2009-09-22 18:18:14 +00:00
|
|
|
#define PERR_DRCODE(n) perr->perr_dests[n].dest_rcode
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void
|
|
|
|
hwmp_recv_perr(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211_meshperr_ie pperr;
|
|
|
|
int i, forward = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acceptance criteria: check if we received a PERR from a
|
|
|
|
* neighbor and forwarding is enabled.
|
|
|
|
*/
|
|
|
|
if (ni == vap->iv_bss ||
|
|
|
|
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED ||
|
|
|
|
!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD))
|
|
|
|
return;
|
|
|
|
/*
|
|
|
|
* Find all routing entries that match and delete them.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < perr->perr_ndests; i++) {
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, PERR_DADDR(i));
|
|
|
|
if (rt == NULL)
|
|
|
|
continue;
|
2009-09-22 18:18:14 +00:00
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
|
|
|
if (!(PERR_DFLAGS(0) & IEEE80211_MESHPERR_DFLAGS_USN) &&
|
|
|
|
HWMP_SEQ_GEQ(PERR_DSEQ(i), hr->hr_seq)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ieee80211_mesh_rt_del(vap, rt->rt_dest);
|
2009-07-27 14:22:09 +00:00
|
|
|
ieee80211_mesh_rt_flush_peer(vap, rt->rt_dest);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt = NULL;
|
|
|
|
forward = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Propagate the PERR if we previously found it on our routing table.
|
|
|
|
* XXX handle ndest > 1
|
|
|
|
*/
|
2009-09-22 18:18:14 +00:00
|
|
|
if (forward && perr->perr_ttl > 1) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP, ni,
|
2009-07-20 19:12:08 +00:00
|
|
|
"propagate PERR from %s", ether_sprintf(wh->i_addr2));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
memcpy(&pperr, perr, sizeof(*perr));
|
2009-09-22 18:18:14 +00:00
|
|
|
pperr.perr_ttl--;
|
2009-07-27 14:22:09 +00:00
|
|
|
hwmp_send_perr(vap->iv_bss, vap->iv_myaddr, broadcastaddr,
|
|
|
|
&pperr);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
#undef PEER_DADDR
|
|
|
|
#undef PERR_DSEQ
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_send_perr(struct ieee80211_node *ni,
|
|
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshperr_ie *perr)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = ni->ni_vap->iv_hwmp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enforce PERR interval.
|
|
|
|
*/
|
|
|
|
if (ratecheck(&hs->hs_lastperr, &ieee80211_hwmp_perrminint) == 0)
|
|
|
|
return EALREADY;
|
|
|
|
getmicrouptime(&hs->hs_lastperr);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mesh perr action frame format
|
|
|
|
* [6] da
|
|
|
|
* [6] sa
|
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] mesh path error
|
|
|
|
*/
|
|
|
|
perr->perr_ie = IEEE80211_ELEMID_MESHPERR;
|
|
|
|
return hwmp_send_action(ni, sa, da, (uint8_t *)perr,
|
|
|
|
sizeof(struct ieee80211_meshperr_ie));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
hwmp_recv_rann(struct ieee80211vap *vap, struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, const struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211_meshrann_ie prann;
|
|
|
|
|
|
|
|
if (ni == vap->iv_bss ||
|
|
|
|
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
|
|
|
|
return;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, rann->rann_addr);
|
|
|
|
/*
|
|
|
|
* Discover the path to the root mesh STA.
|
|
|
|
* If we already know it, propagate the RANN element.
|
|
|
|
*/
|
|
|
|
if (rt == NULL) {
|
|
|
|
hwmp_discover(vap, rann->rann_addr, NULL);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt, struct ieee80211_hwmp_route);
|
2009-07-27 14:22:09 +00:00
|
|
|
if (HWMP_SEQ_GT(rann->rann_seq, hr->hr_seq) && rann->rann_ttl > 1 &&
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rann->rann_hopcount < hs->hs_maxhops &&
|
|
|
|
(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)) {
|
|
|
|
memcpy(&prann, rann, sizeof(prann));
|
|
|
|
prann.rann_hopcount += 1;
|
|
|
|
prann.rann_ttl -= 1;
|
|
|
|
prann.rann_metric += ms->ms_pmetric->mpm_metric(ni);
|
|
|
|
hwmp_send_rann(vap->iv_bss, vap->iv_myaddr, broadcastaddr,
|
|
|
|
&prann);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_send_rann(struct ieee80211_node *ni,
|
|
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_meshrann_ie *rann)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* mesh rann action frame format
|
|
|
|
* [6] da
|
|
|
|
* [6] sa
|
|
|
|
* [6] addr3 = sa
|
|
|
|
* [1] action
|
|
|
|
* [1] category
|
|
|
|
* [tlv] root annoucement
|
|
|
|
*/
|
|
|
|
rann->rann_ie = IEEE80211_ELEMID_MESHRANN;
|
|
|
|
return hwmp_send_action(ni, sa, da, (uint8_t *)rann,
|
|
|
|
sizeof(struct ieee80211_meshrann_ie));
|
|
|
|
}
|
|
|
|
|
|
|
|
#define PREQ_TFLAGS(n) preq.preq_targets[n].target_flags
|
|
|
|
#define PREQ_TADDR(n) preq.preq_targets[n].target_addr
|
|
|
|
#define PREQ_TSEQ(n) preq.preq_targets[n].target_seq
|
|
|
|
static struct ieee80211_node *
|
|
|
|
hwmp_discover(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN], struct mbuf *m)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt = NULL;
|
|
|
|
struct ieee80211_hwmp_route *hr;
|
|
|
|
struct ieee80211_meshpreq_ie preq;
|
|
|
|
struct ieee80211_node *ni;
|
|
|
|
int sendpreq = 0;
|
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS,
|
|
|
|
("not a mesh vap, opmode %d", vap->iv_opmode));
|
|
|
|
|
|
|
|
KASSERT(!IEEE80211_ADDR_EQ(vap->iv_myaddr, dest),
|
|
|
|
("%s: discovering self!", __func__));
|
|
|
|
|
|
|
|
ni = NULL;
|
|
|
|
if (!IEEE80211_IS_MULTICAST(dest)) {
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, dest);
|
|
|
|
if (rt == NULL) {
|
|
|
|
rt = ieee80211_mesh_rt_add(vap, dest);
|
|
|
|
if (rt == NULL) {
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_HWMP,
|
|
|
|
ni, "unable to add discovery path to %s",
|
|
|
|
ether_sprintf(dest));
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
hr = IEEE80211_MESH_ROUTE_PRIV(rt,
|
|
|
|
struct ieee80211_hwmp_route);
|
2009-07-20 19:12:08 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
|
2009-07-27 14:22:09 +00:00
|
|
|
if (hr->hr_targetseq == 0)
|
|
|
|
hr->hr_targetseq = ++hs->hs_seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
rt->rt_metric = IEEE80211_MESHLMETRIC_INITIALVAL;
|
|
|
|
rt->rt_lifetime =
|
2009-07-21 19:38:22 +00:00
|
|
|
ticks_to_msecs(ieee80211_hwmp_pathtimeout);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* XXX check preq retries */
|
|
|
|
sendpreq = 1;
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, dest,
|
2009-07-20 19:12:08 +00:00
|
|
|
"start path discovery (src %s)",
|
|
|
|
m == NULL ? "<none>" : ether_sprintf(
|
|
|
|
mtod(m, struct ether_header *)->ether_shost));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Try to discover the path for this node.
|
|
|
|
*/
|
|
|
|
preq.preq_flags = 0;
|
|
|
|
preq.preq_hopcount = 0;
|
|
|
|
preq.preq_ttl = ms->ms_ttl;
|
2009-07-27 14:22:09 +00:00
|
|
|
preq.preq_id = ++hs->hs_preqid;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(preq.preq_origaddr, vap->iv_myaddr);
|
2009-07-27 14:22:09 +00:00
|
|
|
preq.preq_origseq = hr->hr_targetseq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
preq.preq_lifetime = rt->rt_lifetime;
|
|
|
|
preq.preq_metric = rt->rt_metric;
|
|
|
|
preq.preq_tcount = 1;
|
|
|
|
IEEE80211_ADDR_COPY(PREQ_TADDR(0), dest);
|
|
|
|
PREQ_TFLAGS(0) = 0;
|
|
|
|
if (ieee80211_hwmp_targetonly)
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_TO;
|
|
|
|
if (ieee80211_hwmp_replyforward)
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_RF;
|
|
|
|
PREQ_TFLAGS(0) |= IEEE80211_MESHPREQ_TFLAGS_USN;
|
|
|
|
PREQ_TSEQ(0) = 0;
|
|
|
|
/* XXX check return value */
|
|
|
|
hwmp_send_preq(vap->iv_bss, vap->iv_myaddr,
|
|
|
|
broadcastaddr, &preq);
|
|
|
|
}
|
2009-07-20 19:12:08 +00:00
|
|
|
if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ni = ieee80211_find_txnode(vap, rt->rt_nexthop);
|
|
|
|
} else {
|
|
|
|
ni = ieee80211_find_txnode(vap, dest);
|
2009-07-20 19:12:08 +00:00
|
|
|
/* NB: if null then we leak mbuf */
|
|
|
|
KASSERT(ni != NULL, ("leak mcast frame"));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return ni;
|
|
|
|
}
|
|
|
|
done:
|
|
|
|
if (ni == NULL && m != NULL) {
|
|
|
|
if (sendpreq) {
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
/*
|
|
|
|
* Queue packet for transmit when path discovery
|
|
|
|
* completes. If discovery never completes the
|
|
|
|
* frame will be flushed by way of the aging timer.
|
|
|
|
*/
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_HWMP, dest,
|
|
|
|
"%s", "queue frame until path found");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
m->m_pkthdr.rcvif = (void *)(uintptr_t)
|
|
|
|
ieee80211_mac_hash(ic, dest);
|
|
|
|
/* XXX age chosen randomly */
|
|
|
|
ieee80211_ageq_append(&ic->ic_stageq, m,
|
|
|
|
IEEE80211_INACT_WAIT);
|
2009-07-20 19:12:08 +00:00
|
|
|
} else {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_HWMP,
|
|
|
|
dest, NULL, "%s", "no valid path to this node");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
m_freem(m);
|
2009-07-20 19:12:08 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
return ni;
|
|
|
|
}
|
|
|
|
#undef PREQ_TFLAGS
|
|
|
|
#undef PREQ_TADDR
|
|
|
|
#undef PREQ_TSEQ
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_ioctl_get80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_HWMP_ROOTMODE:
|
|
|
|
ireq->i_val = hs->hs_rootmode;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_HWMP_MAXHOPS:
|
|
|
|
ireq->i_val = hs->hs_maxhops;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_GET(hwmp, hwmp_ioctl_get80211);
|
|
|
|
|
|
|
|
static int
|
|
|
|
hwmp_ioctl_set80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_hwmp_state *hs = vap->iv_hwmp;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_HWMP_ROOTMODE:
|
|
|
|
if (ireq->i_val < 0 || ireq->i_val > 3)
|
|
|
|
return EINVAL;
|
|
|
|
hs->hs_rootmode = ireq->i_val;
|
|
|
|
hwmp_rootmode_setup(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_HWMP_MAXHOPS:
|
|
|
|
if (ireq->i_val <= 0 || ireq->i_val > 255)
|
|
|
|
return EINVAL;
|
|
|
|
hs->hs_maxhops = ireq->i_val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_SET(hwmp, hwmp_ioctl_set80211);
|