freebsd-nq/sys/netinet6/in6_fib.c

281 lines
7.6 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2015
* Alexander V. Chernikov <melifaro@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_route.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/lock.h>
#include <sys/rmlock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <sys/kernel.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_dl.h>
#include <net/route.h>
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
#include <net/route/route_ctl.h>
#include <net/route/route_var.h>
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
#include <net/route/nhop.h>
#include <net/toeplitz.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/ip_mroute.h>
#include <netinet/ip6.h>
#include <netinet6/in6_fib.h>
#include <netinet6/in6_var.h>
#include <netinet6/nd6.h>
#include <netinet6/scope6_var.h>
#include <net/if_types.h>
#ifdef INET6
CHK_STRUCT_ROUTE_COMPAT(struct route_in6, ro_dst);
#ifdef ROUTE_MPATH
struct _hash_5tuple_ipv6 {
struct in6_addr src;
struct in6_addr dst;
unsigned short src_port;
unsigned short dst_port;
char proto;
char spare[3];
};
_Static_assert(sizeof(struct _hash_5tuple_ipv6) == 40,
"_hash_5tuple_ipv6 size is wrong");
uint32_t
fib6_calc_software_hash(const struct in6_addr *src, const struct in6_addr *dst,
unsigned short src_port, unsigned short dst_port, char proto,
uint32_t *phashtype)
{
struct _hash_5tuple_ipv6 data;
data.src = *src;
data.dst = *dst;
data.src_port = src_port;
data.dst_port = dst_port;
data.proto = proto;
data.spare[0] = data.spare[1] = data.spare[2] = 0;
*phashtype = M_HASHTYPE_OPAQUE_HASH;
return (toeplitz_hash(MPATH_ENTROPY_KEY_LEN, mpath_entropy_key,
sizeof(data), (uint8_t *)&data));
}
#endif
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
/*
* Looks up path in fib @fibnum specified by @dst.
* Assumes scope is deembedded and provided in @scopeid.
*
* Returns path nexthop on success. Nexthop is safe to use
* within the current network epoch. If longer lifetime is required,
* one needs to pass NHR_REF as a flag. This will return referenced
* nexthop.
*/
struct nhop_object *
fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid)
{
RIB_RLOCK_TRACKER;
struct rib_head *rh;
struct radix_node *rn;
struct nhop_object *nh;
struct sockaddr_in6 sin6;
KASSERT((fibnum < rt_numfibs), ("fib6_lookup: bad fibnum"));
rh = rt_tables_get_rnh(fibnum, AF_INET6);
if (rh == NULL)
return (NULL);
/* TODO: radix changes */
//addr = *dst6;
/* Prepare lookup key */
memset(&sin6, 0, sizeof(sin6));
sin6.sin6_len = sizeof(struct sockaddr_in6);
sin6.sin6_addr = *dst6;
/* Assume scopeid is valid and embed it directly */
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
RIB_RLOCK(rh);
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0)) {
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
nh = nhop_select((RNTORT(rn))->rt_nhop, flowid);
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
/* Ensure route & ifp is UP */
if (RT_LINK_IS_UP(nh->nh_ifp)) {
if (flags & NHR_REF)
nhop_ref_object(nh);
RIB_RUNLOCK(rh);
return (nh);
}
}
RIB_RUNLOCK(rh);
RTSTAT_INC(rts_unreach);
return (NULL);
}
inline static int
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
check_urpf_nhop(const struct nhop_object *nh, uint32_t flags,
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
const struct ifnet *src_if)
{
if (src_if != NULL && nh->nh_aifp == src_if) {
return (1);
}
if (src_if == NULL) {
if ((flags & NHR_NODEFAULT) == 0)
return (1);
else if ((nh->nh_flags & NHF_DEFAULT) == 0)
return (1);
}
return (0);
}
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
static int
check_urpf(struct nhop_object *nh, uint32_t flags,
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
const struct ifnet *src_if)
{
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
#ifdef ROUTE_MPATH
if (NH_IS_NHGRP(nh)) {
struct weightened_nhop *wn;
uint32_t num_nhops;
wn = nhgrp_get_nhops((struct nhgrp_object *)nh, &num_nhops);
for (int i = 0; i < num_nhops; i++) {
if (check_urpf_nhop(wn[i].nh, flags, src_if) != 0)
return (1);
}
return (0);
} else
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
#endif
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
return (check_urpf_nhop(nh, flags, src_if));
}
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
/*
* Performs reverse path forwarding lookup.
* If @src_if is non-zero, verifies that at least 1 path goes via
* this interface.
* If @src_if is zero, verifies that route exist.
* if @flags contains NHR_NOTDEFAULT, do not consider default route.
*
* Returns 1 if route matching conditions is found, 0 otherwise.
*/
int
fib6_check_urpf(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, const struct ifnet *src_if)
{
RIB_RLOCK_TRACKER;
struct rib_head *rh;
struct radix_node *rn;
struct sockaddr_in6 sin6;
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
int ret;
KASSERT((fibnum < rt_numfibs), ("fib6_check_urpf: bad fibnum"));
rh = rt_tables_get_rnh(fibnum, AF_INET6);
if (rh == NULL)
return (0);
/* TODO: radix changes */
/* Prepare lookup key */
memset(&sin6, 0, sizeof(sin6));
sin6.sin6_len = sizeof(struct sockaddr_in6);
sin6.sin6_addr = *dst6;
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
/* Assume scopeid is valid and embed it directly */
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
RIB_RLOCK(rh);
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0)) {
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
ret = check_urpf(RNTORT(rn)->rt_nhop, flags, src_if);
Introduce nexthop objects and new routing KPI. This is the foundational change for the routing subsytem rearchitecture. More details and goals are available in https://reviews.freebsd.org/D24141 . This patch introduces concept of nexthop objects and new nexthop-based routing KPI. Nexthops are objects, containing all necessary information for performing the packet output decision. Output interface, mtu, flags, gw address goes there. For most of the cases, these objects will serve the same role as the struct rtentry is currently serving. Typically there will be low tens of such objects for the router even with multiple BGP full-views, as these objects will be shared between routing entries. This allows to store more information in the nexthop. New KPI: struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, uint32_t flowid); struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, uint32_t flowid); These 2 function are intended to replace all all flavours of <in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous fib[46]-generation functions. Upon successful lookup, they return nexthop object which is guaranteed to exist within current NET_EPOCH. If longer lifetime is desired, one can specify NHR_REF as a flag and get a referenced version of the nexthop. Reference semantic closely resembles rtentry one, allowing sed-style conversion. Additionally, another 2 functions are introduced to support uRPF functionality inside variety of our firewalls. Their primary goal is to hide the multipath implementation details inside the routing subsystem, greatly simplifying firewalls implementation: int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid, uint32_t flags, const struct ifnet *src_if); All functions have a separate scopeid argument, paving way to eliminating IPv6 scope embedding and allowing to support IPv4 link-locals in the future. Structure changes: * rtentry gets new 'rt_nhop' pointer, slightly growing the overall size. * rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz. Old KPI: During the transition state old and new KPI will coexists. As there are another 4-5 decent-sized conversion patches, it will probably take a couple of weeks. To support both KPIs, fields not required by the new KPI (most of rtentry) has to be kept, resulting in the temporary size increase. Once conversion is finished, rtentry will notably shrink. More details: * architectural overview: https://reviews.freebsd.org/D24141 * list of the next changes: https://reviews.freebsd.org/D24232 Reviewed by: ae,glebius(initial version) Differential Revision: https://reviews.freebsd.org/D24232
2020-04-12 14:30:00 +00:00
RIB_RUNLOCK(rh);
return (ret);
}
RIB_RUNLOCK(rh);
return (0);
}
struct nhop_object *
fib6_lookup_debugnet(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags)
{
struct rib_head *rh;
struct radix_node *rn;
struct nhop_object *nh;
struct sockaddr_in6 sin6;
KASSERT((fibnum < rt_numfibs), ("fib6_lookup: bad fibnum"));
rh = rt_tables_get_rnh(fibnum, AF_INET6);
if (rh == NULL)
return (NULL);
/* TODO: radix changes */
//addr = *dst6;
/* Prepare lookup key */
memset(&sin6, 0, sizeof(sin6));
sin6.sin6_len = sizeof(struct sockaddr_in6);
sin6.sin6_addr = *dst6;
/* Assume scopeid is valid and embed it directly */
if (IN6_IS_SCOPE_LINKLOCAL(dst6))
sin6.sin6_addr.s6_addr16[1] = htons(scopeid & 0xffff);
rn = rh->rnh_matchaddr((void *)&sin6, &rh->head);
if (rn != NULL && ((rn->rn_flags & RNF_ROOT) == 0)) {
Introduce scalable route multipath. This change is based on the nexthop objects landed in D24232. The change introduces the concept of nexthop groups. Each group contains the collection of nexthops with their relative weights and a dataplane-optimized structure to enable efficient nexthop selection. Simular to the nexthops, nexthop groups are immutable. Dataplane part gets compiled during group creation and is basically an array of nexthop pointers, compiled w.r.t their weights. With this change, `rt_nhop` field of `struct rtentry` contains either nexthop or nexthop group. They are distinguished by the presense of NHF_MULTIPATH flag. All dataplane lookup functions returns pointer to the nexthop object, leaving nexhop groups details inside routing subsystem. User-visible changes: The change is intended to be backward-compatible: all non-mpath operations should work as before with ROUTE_MPATH and net.route.multipath=1. All routes now comes with weight, default weight is 1, maximum is 2^24-1. Current maximum multipath group width is statically set to 64. This will become sysctl-tunable in the followup changes. Using functionality: * Recompile kernel with ROUTE_MPATH * set net.route.multipath to 1 route add -6 2001:db8::/32 2001:db8::2 -weight 10 route add -6 2001:db8::/32 2001:db8::3 -weight 20 netstat -6On Nexthop groups data Internet6: GrpIdx NhIdx Weight Slots Gateway Netif Refcnt 1 ------- ------- ------- --------------------------------------- --------- 1 13 10 1 2001:db8::2 vlan2 14 20 2 2001:db8::3 vlan2 Next steps: * Land outbound hashing for locally-originated routes ( D26523 ). * Fix net/bird multipath (net/frr seems to work fine) * Add ROUTE_MPATH to GENERIC * Set net.route.multipath=1 by default Tested by: olivier Reviewed by: glebius Relnotes: yes Differential Revision: https://reviews.freebsd.org/D26449
2020-10-03 10:47:17 +00:00
nh = nhop_select((RNTORT(rn))->rt_nhop, 0);
/* Ensure route & ifp is UP */
if (RT_LINK_IS_UP(nh->nh_ifp)) {
if (flags & NHR_REF)
nhop_ref_object(nh);
return (nh);
}
}
return (NULL);
}
#endif