freebsd-nq/sys/security/audit/audit_syscalls.c

758 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (c) 1999-2005 Apple Computer, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_mac.h"
#include <sys/param.h>
#include <sys/mount.h>
#include <sys/namei.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/sysproto.h>
#include <sys/systm.h>
#include <sys/vnode.h>
#include <sys/jail.h>
#include <bsm/audit.h>
#include <bsm/audit_kevents.h>
#include <security/audit/audit.h>
#include <security/audit/audit_private.h>
#include <security/mac/mac_framework.h>
#ifdef AUDIT
/*
* System call to allow a user space application to submit a BSM audit record
* to the kernel for inclusion in the audit log. This function does little
* verification on the audit record that is submitted.
*
* XXXAUDIT: Audit preselection for user records does not currently work,
* since we pre-select only based on the AUE_audit event type, not the event
* type submitted as part of the user audit data.
*/
/* ARGSUSED */
int
audit(struct thread *td, struct audit_args *uap)
{
int error;
void * rec;
struct kaudit_record *ar;
if (jailed(td->td_ucred))
return (ENOSYS);
error = priv_check(td, PRIV_AUDIT_SUBMIT);
if (error)
return (error);
if ((uap->length <= 0) || (uap->length > audit_qctrl.aq_bufsz))
return (EINVAL);
ar = currecord();
/*
* If there's no current audit record (audit() itself not audited)
* commit the user audit record.
*/
if (ar == NULL) {
/*
* This is not very efficient; we're required to allocate a
* complete kernel audit record just so the user record can
* tag along.
*
* XXXAUDIT: Maybe AUE_AUDIT in the system call context and
* special pre-select handling?
*/
td->td_ar = audit_new(AUE_NULL, td);
if (td->td_ar == NULL)
return (ENOTSUP);
ar = td->td_ar;
}
if (uap->length > MAX_AUDIT_RECORD_SIZE)
return (EINVAL);
rec = malloc(uap->length, M_AUDITDATA, M_WAITOK);
error = copyin(uap->record, rec, uap->length);
if (error)
goto free_out;
/* Verify the record. */
if (bsm_rec_verify(rec) == 0) {
error = EINVAL;
goto free_out;
}
#ifdef MAC
error = mac_system_check_audit(td->td_ucred, rec, uap->length);
if (error)
goto free_out;
#endif
/*
* Attach the user audit record to the kernel audit record. Because
* this system call is an auditable event, we will write the user
* record along with the record for this audit event.
*
* XXXAUDIT: KASSERT appropriate starting values of k_udata, k_ulen,
* k_ar_commit & AR_COMMIT_USER?
*/
ar->k_udata = rec;
ar->k_ulen = uap->length;
ar->k_ar_commit |= AR_COMMIT_USER;
/*
* Currently we assume that all preselection has been performed in
* userspace. We unconditionally set these masks so that the records
* get committed both to the trail and pipe. In the future we will
* want to setup kernel based preselection.
*/
ar->k_ar_commit |= (AR_PRESELECT_USER_TRAIL | AR_PRESELECT_USER_PIPE);
return (0);
free_out:
/*
* audit_syscall_exit() will free the audit record on the thread even
* if we allocated it above.
*/
free(rec, M_AUDITDATA);
return (error);
}
/*
* System call to manipulate auditing.
*/
/* ARGSUSED */
int
auditon(struct thread *td, struct auditon_args *uap)
{
struct ucred *newcred, *oldcred;
int error;
union auditon_udata udata;
struct proc *tp;
if (jailed(td->td_ucred))
return (ENOSYS);
AUDIT_ARG(cmd, uap->cmd);
#ifdef MAC
error = mac_system_check_auditon(td->td_ucred, uap->cmd);
if (error)
return (error);
#endif
error = priv_check(td, PRIV_AUDIT_CONTROL);
if (error)
return (error);
if ((uap->length <= 0) || (uap->length > sizeof(union auditon_udata)))
return (EINVAL);
memset((void *)&udata, 0, sizeof(udata));
/*
* Some of the GET commands use the arguments too.
*/
switch (uap->cmd) {
case A_SETPOLICY:
case A_SETKMASK:
case A_SETQCTRL:
case A_SETSTAT:
case A_SETUMASK:
case A_SETSMASK:
case A_SETCOND:
case A_SETCLASS:
case A_SETPMASK:
case A_SETFSIZE:
case A_SETKAUDIT:
case A_GETCLASS:
case A_GETPINFO:
case A_GETPINFO_ADDR:
case A_SENDTRIGGER:
error = copyin(uap->data, (void *)&udata, uap->length);
if (error)
return (error);
AUDIT_ARG(auditon, &udata);
break;
}
/*
* XXXAUDIT: Locking?
*/
switch (uap->cmd) {
case A_GETPOLICY:
if (!audit_fail_stop)
udata.au_policy |= AUDIT_CNT;
if (audit_panic_on_write_fail)
udata.au_policy |= AUDIT_AHLT;
if (audit_argv)
udata.au_policy |= AUDIT_ARGV;
if (audit_arge)
udata.au_policy |= AUDIT_ARGE;
break;
case A_SETPOLICY:
if (udata.au_policy & ~(AUDIT_CNT|AUDIT_AHLT|AUDIT_ARGV|
AUDIT_ARGE))
return (EINVAL);
/*
* XXX - Need to wake up waiters if the policy relaxes?
*/
audit_fail_stop = ((udata.au_policy & AUDIT_CNT) == 0);
audit_panic_on_write_fail = (udata.au_policy & AUDIT_AHLT);
audit_argv = (udata.au_policy & AUDIT_ARGV);
audit_arge = (udata.au_policy & AUDIT_ARGE);
break;
case A_GETKMASK:
udata.au_mask = audit_nae_mask;
break;
case A_SETKMASK:
audit_nae_mask = udata.au_mask;
break;
case A_GETQCTRL:
udata.au_qctrl = audit_qctrl;
break;
case A_SETQCTRL:
if ((udata.au_qctrl.aq_hiwater > AQ_MAXHIGH) ||
(udata.au_qctrl.aq_lowater >= udata.au_qctrl.aq_hiwater) ||
(udata.au_qctrl.aq_bufsz > AQ_MAXBUFSZ) ||
(udata.au_qctrl.aq_minfree < 0) ||
(udata.au_qctrl.aq_minfree > 100))
return (EINVAL);
audit_qctrl = udata.au_qctrl;
/* XXX The queue delay value isn't used with the kernel. */
audit_qctrl.aq_delay = -1;
break;
case A_GETCWD:
return (ENOSYS);
break;
case A_GETCAR:
return (ENOSYS);
break;
case A_GETSTAT:
return (ENOSYS);
break;
case A_SETSTAT:
return (ENOSYS);
break;
case A_SETUMASK:
return (ENOSYS);
break;
case A_SETSMASK:
return (ENOSYS);
break;
case A_GETCOND:
if (audit_enabled && !audit_suspended)
udata.au_cond = AUC_AUDITING;
else
udata.au_cond = AUC_NOAUDIT;
break;
case A_SETCOND:
if (udata.au_cond == AUC_NOAUDIT)
audit_suspended = 1;
if (udata.au_cond == AUC_AUDITING)
audit_suspended = 0;
if (udata.au_cond == AUC_DISABLED) {
audit_suspended = 1;
audit_shutdown(NULL, 0);
}
break;
case A_GETCLASS:
udata.au_evclass.ec_class = au_event_class(
udata.au_evclass.ec_number);
break;
case A_SETCLASS:
au_evclassmap_insert(udata.au_evclass.ec_number,
udata.au_evclass.ec_class);
break;
case A_GETPINFO:
if (udata.au_aupinfo.ap_pid < 1)
return (EINVAL);
if ((tp = pfind(udata.au_aupinfo.ap_pid)) == NULL)
return (EINVAL);
if (p_cansee(td, tp) != 0) {
PROC_UNLOCK(tp);
return (EINVAL);
}
if (tp->p_ucred->cr_audit.ai_termid.at_type == AU_IPv6) {
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
PROC_UNLOCK(tp);
return (EINVAL);
}
udata.au_aupinfo.ap_auid =
tp->p_ucred->cr_audit.ai_auid;
udata.au_aupinfo.ap_mask.am_success =
tp->p_ucred->cr_audit.ai_mask.am_success;
udata.au_aupinfo.ap_mask.am_failure =
tp->p_ucred->cr_audit.ai_mask.am_failure;
udata.au_aupinfo.ap_termid.machine =
tp->p_ucred->cr_audit.ai_termid.at_addr[0];
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
udata.au_aupinfo.ap_termid.port =
(dev_t)tp->p_ucred->cr_audit.ai_termid.at_port;
udata.au_aupinfo.ap_asid =
tp->p_ucred->cr_audit.ai_asid;
PROC_UNLOCK(tp);
break;
case A_SETPMASK:
if (udata.au_aupinfo.ap_pid < 1)
return (EINVAL);
newcred = crget();
if ((tp = pfind(udata.au_aupinfo.ap_pid)) == NULL) {
crfree(newcred);
return (EINVAL);
}
if (p_cansee(td, tp) != 0) {
PROC_UNLOCK(tp);
crfree(newcred);
return (EINVAL);
}
oldcred = tp->p_ucred;
crcopy(newcred, oldcred);
newcred->cr_audit.ai_mask.am_success =
udata.au_aupinfo.ap_mask.am_success;
newcred->cr_audit.ai_mask.am_failure =
udata.au_aupinfo.ap_mask.am_failure;
td->td_proc->p_ucred = newcred;
PROC_UNLOCK(tp);
crfree(oldcred);
break;
case A_SETFSIZE:
if ((udata.au_fstat.af_filesz != 0) &&
(udata.au_fstat.af_filesz < MIN_AUDIT_FILE_SIZE))
return (EINVAL);
audit_fstat.af_filesz = udata.au_fstat.af_filesz;
break;
case A_GETFSIZE:
udata.au_fstat.af_filesz = audit_fstat.af_filesz;
udata.au_fstat.af_currsz = audit_fstat.af_currsz;
break;
case A_GETPINFO_ADDR:
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
if (udata.au_aupinfo_addr.ap_pid < 1)
return (EINVAL);
if ((tp = pfind(udata.au_aupinfo_addr.ap_pid)) == NULL)
return (EINVAL);
udata.au_aupinfo_addr.ap_auid =
tp->p_ucred->cr_audit.ai_auid;
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
udata.au_aupinfo_addr.ap_mask.am_success =
tp->p_ucred->cr_audit.ai_mask.am_success;
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
udata.au_aupinfo_addr.ap_mask.am_failure =
tp->p_ucred->cr_audit.ai_mask.am_failure;
udata.au_aupinfo_addr.ap_termid =
tp->p_ucred->cr_audit.ai_termid;
udata.au_aupinfo_addr.ap_asid =
tp->p_ucred->cr_audit.ai_asid;
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
PROC_UNLOCK(tp);
break;
case A_GETKAUDIT:
return (ENOSYS);
break;
case A_SETKAUDIT:
return (ENOSYS);
break;
case A_SENDTRIGGER:
if ((udata.au_trigger < AUDIT_TRIGGER_MIN) ||
(udata.au_trigger > AUDIT_TRIGGER_MAX))
return (EINVAL);
return (audit_send_trigger(udata.au_trigger));
default:
return (EINVAL);
}
/*
* Copy data back to userspace for the GET comands.
*/
switch (uap->cmd) {
case A_GETPOLICY:
case A_GETKMASK:
case A_GETQCTRL:
case A_GETCWD:
case A_GETCAR:
case A_GETSTAT:
case A_GETCOND:
case A_GETCLASS:
case A_GETPINFO:
case A_GETFSIZE:
case A_GETPINFO_ADDR:
case A_GETKAUDIT:
error = copyout((void *)&udata, uap->data, uap->length);
if (error)
return (error);
break;
}
return (0);
}
/*
* System calls to manage the user audit information.
*/
/* ARGSUSED */
int
getauid(struct thread *td, struct getauid_args *uap)
{
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
error = priv_check(td, PRIV_AUDIT_GETAUDIT);
if (error)
return (error);
return (copyout(&td->td_ucred->cr_audit.ai_auid, uap->auid,
sizeof(td->td_ucred->cr_audit.ai_auid)));
}
/* ARGSUSED */
int
setauid(struct thread *td, struct setauid_args *uap)
{
struct ucred *newcred, *oldcred;
au_id_t id;
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
error = copyin(uap->auid, &id, sizeof(id));
if (error)
return (error);
audit_arg_auid(id);
newcred = crget();
PROC_LOCK(td->td_proc);
oldcred = td->td_proc->p_ucred;
crcopy(newcred, oldcred);
#ifdef MAC
error = mac_proc_check_setauid(oldcred, id);
if (error)
goto fail;
#endif
error = priv_check_cred(oldcred, PRIV_AUDIT_SETAUDIT, 0);
if (error)
goto fail;
newcred->cr_audit.ai_auid = id;
td->td_proc->p_ucred = newcred;
PROC_UNLOCK(td->td_proc);
crfree(oldcred);
return (0);
fail:
PROC_UNLOCK(td->td_proc);
crfree(newcred);
return (error);
}
/*
* System calls to get and set process audit information.
*/
/* ARGSUSED */
int
getaudit(struct thread *td, struct getaudit_args *uap)
{
struct auditinfo ai;
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
error = priv_check(td, PRIV_AUDIT_GETAUDIT);
if (error)
return (error);
if (td->td_ucred->cr_audit.ai_termid.at_type == AU_IPv6)
return (E2BIG);
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
bzero(&ai, sizeof(ai));
ai.ai_auid = td->td_ucred->cr_audit.ai_auid;
ai.ai_mask = td->td_ucred->cr_audit.ai_mask;
ai.ai_asid = td->td_ucred->cr_audit.ai_asid;
ai.ai_termid.machine = td->td_ucred->cr_audit.ai_termid.at_addr[0];
ai.ai_termid.port = td->td_ucred->cr_audit.ai_termid.at_port;
return (copyout(&ai, uap->auditinfo, sizeof(ai)));
}
/* ARGSUSED */
int
setaudit(struct thread *td, struct setaudit_args *uap)
{
struct ucred *newcred, *oldcred;
struct auditinfo ai;
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
error = copyin(uap->auditinfo, &ai, sizeof(ai));
if (error)
return (error);
audit_arg_auditinfo(&ai);
newcred = crget();
PROC_LOCK(td->td_proc);
oldcred = td->td_proc->p_ucred;
crcopy(newcred, oldcred);
#ifdef MAC
error = mac_proc_check_setaudit(oldcred, &ai);
if (error)
goto fail;
#endif
error = priv_check_cred(oldcred, PRIV_AUDIT_SETAUDIT, 0);
if (error)
goto fail;
bzero(&newcred->cr_audit, sizeof(newcred->cr_audit));
newcred->cr_audit.ai_auid = ai.ai_auid;
newcred->cr_audit.ai_mask = ai.ai_mask;
newcred->cr_audit.ai_asid = ai.ai_asid;
newcred->cr_audit.ai_termid.at_addr[0] = ai.ai_termid.machine;
newcred->cr_audit.ai_termid.at_port = ai.ai_termid.port;
newcred->cr_audit.ai_termid.at_type = AU_IPv4;
td->td_proc->p_ucred = newcred;
PROC_UNLOCK(td->td_proc);
crfree(oldcred);
return (0);
fail:
PROC_UNLOCK(td->td_proc);
crfree(newcred);
return (error);
}
/* ARGSUSED */
int
getaudit_addr(struct thread *td, struct getaudit_addr_args *uap)
{
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
if (uap->length < sizeof(*uap->auditinfo_addr))
return (EOVERFLOW);
error = priv_check(td, PRIV_AUDIT_GETAUDIT);
if (error)
return (error);
return (copyout(&td->td_ucred->cr_audit, uap->auditinfo_addr,
sizeof(*uap->auditinfo_addr)));
}
/* ARGSUSED */
int
setaudit_addr(struct thread *td, struct setaudit_addr_args *uap)
{
struct ucred *newcred, *oldcred;
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
struct auditinfo_addr aia;
int error;
if (jailed(td->td_ucred))
return (ENOSYS);
error = copyin(uap->auditinfo_addr, &aia, sizeof(aia));
if (error)
return (error);
audit_arg_auditinfo_addr(&aia);
if (aia.ai_termid.at_type != AU_IPv6 &&
aia.ai_termid.at_type != AU_IPv4)
return (EINVAL);
newcred = crget();
PROC_LOCK(td->td_proc);
oldcred = td->td_proc->p_ucred;
crcopy(newcred, oldcred);
#ifdef MAC
error = mac_proc_check_setaudit_addr(oldcred, &aia);
if (error)
goto fail;
#endif
error = priv_check_cred(oldcred, PRIV_AUDIT_SETAUDIT, 0);
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
if (error)
goto fail;
newcred->cr_audit = aia;
td->td_proc->p_ucred = newcred;
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
PROC_UNLOCK(td->td_proc);
crfree(oldcred);
return (0);
fail:
PROC_UNLOCK(td->td_proc);
crfree(newcred);
Fix the handling of IPv6 addresses for subject and process BSM audit tokens. Currently, we do not support the set{get}audit_addr(2) system calls which allows processes like sshd to set extended or ip6 information for subject tokens. The approach that was taken was to change the process audit state slightly to use an extended terminal ID in the kernel. This allows us to store both IPv4 IPv6 addresses. In the case that an IPv4 address is in use, we convert the terminal ID from an struct auditinfo_addr to a struct auditinfo. If getaudit(2) is called when the subject is bound to an ip6 address, we return E2BIG. - Change the internal audit record to store an extended terminal ID - Introduce ARG_TERMID_ADDR - Change the kaudit <-> BSM conversion process so that we are using the appropriate subject token. If the address associated with the subject is IPv4, we use the standard subject32 token. If the subject has an IPv6 address associated with them, we use an extended subject32 token. - Fix a couple of endian issues where we do a couple of byte swaps when we shouldn't be. IP addresses are already in the correct byte order, so reading the ip6 address 4 bytes at a time and swapping them results in in-correct address data. It should be noted that the same issue was found in the openbsm library and it has been changed there too on the vendor branch - Change A_GETPINFO to use the appropriate structures - Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does, but can also handle ip6 addresses - Adjust get{set}audit(2) syscalls to convert the data auditinfo <-> auditinfo_addr - Fully implement set{get}audit_addr(2) NOTE: This adds the ability for processes to correctly set extended subject information. The appropriate userspace utilities still need to be updated. MFC after: 1 month Reviewed by: rwatson Obtained from: TrustedBSD
2007-04-13 14:55:19 +00:00
return (error);
}
/*
* Syscall to manage audit files.
*/
/* ARGSUSED */
int
auditctl(struct thread *td, struct auditctl_args *uap)
{
struct nameidata nd;
struct ucred *cred;
struct vnode *vp;
int error = 0;
int flags, vfslocked;
if (jailed(td->td_ucred))
return (ENOSYS);
error = priv_check(td, PRIV_AUDIT_CONTROL);
if (error)
return (error);
vp = NULL;
cred = NULL;
/*
* If a path is specified, open the replacement vnode, perform
* validity checks, and grab another reference to the current
* credential.
*
* On Darwin, a NULL path argument is also used to disable audit.
*/
if (uap->path == NULL)
return (EINVAL);
NDINIT(&nd, LOOKUP, FOLLOW | LOCKLEAF | MPSAFE | AUDITVNODE1,
UIO_USERSPACE, uap->path, td);
flags = AUDIT_OPEN_FLAGS;
error = vn_open(&nd, &flags, 0, NULL);
if (error)
return (error);
vfslocked = NDHASGIANT(&nd);
vp = nd.ni_vp;
#ifdef MAC
error = mac_system_check_auditctl(td->td_ucred, vp);
VOP_UNLOCK(vp, 0);
if (error) {
vn_close(vp, AUDIT_CLOSE_FLAGS, td->td_ucred, td);
VFS_UNLOCK_GIANT(vfslocked);
return (error);
}
#else
VOP_UNLOCK(vp, 0);
#endif
NDFREE(&nd, NDF_ONLY_PNBUF);
if (vp->v_type != VREG) {
vn_close(vp, AUDIT_CLOSE_FLAGS, td->td_ucred, td);
VFS_UNLOCK_GIANT(vfslocked);
return (EINVAL);
}
VFS_UNLOCK_GIANT(vfslocked);
cred = td->td_ucred;
crhold(cred);
/*
* XXXAUDIT: Should audit_suspended actually be cleared by
* audit_worker?
*/
audit_suspended = 0;
audit_rotate_vnode(cred, vp);
return (error);
}
#else /* !AUDIT */
int
audit(struct thread *td, struct audit_args *uap)
{
return (ENOSYS);
}
int
auditon(struct thread *td, struct auditon_args *uap)
{
return (ENOSYS);
}
int
getauid(struct thread *td, struct getauid_args *uap)
{
return (ENOSYS);
}
int
setauid(struct thread *td, struct setauid_args *uap)
{
return (ENOSYS);
}
int
getaudit(struct thread *td, struct getaudit_args *uap)
{
return (ENOSYS);
}
int
setaudit(struct thread *td, struct setaudit_args *uap)
{
return (ENOSYS);
}
int
getaudit_addr(struct thread *td, struct getaudit_addr_args *uap)
{
return (ENOSYS);
}
int
setaudit_addr(struct thread *td, struct setaudit_addr_args *uap)
{
return (ENOSYS);
}
int
auditctl(struct thread *td, struct auditctl_args *uap)
{
return (ENOSYS);
}
#endif /* AUDIT */