2013-07-04 08:13:14 +00:00
|
|
|
# $FreeBSD$
|
|
|
|
|
|
|
|
|
|
# arge0 MDIO bus
|
|
|
|
|
hint.argemdio.0.at="nexus0"
|
|
|
|
|
hint.argemdio.0.maddr=0x19000000
|
|
|
|
|
hint.argemdio.0.msize=0x1000
|
|
|
|
|
hint.argemdio.0.order=0
|
|
|
|
|
|
|
|
|
|
# arge1 MDIO bus doesn't exist on the AR7240
|
|
|
|
|
|
|
|
|
|
# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
|
|
|
|
|
# MDIO bus.
|
|
|
|
|
|
|
|
|
|
# hint.arge.0.eeprommac=0x83fe9ff0
|
|
|
|
|
hint.arge.0.phymask=0x10 # PHY 4
|
|
|
|
|
# hint.arge.0.miimode=2 # MII
|
|
|
|
|
hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus
|
|
|
|
|
|
|
|
|
|
# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
|
|
|
|
|
hint.arge.1.phymask=0x0
|
|
|
|
|
# hint.arge.1.miimode=1 # GMII
|
|
|
|
|
hint.arge.1.media=1000 # Force to 1000BaseTX/full
|
|
|
|
|
hint.arge.1.fduplex=1
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# AR7240 switch config
|
|
|
|
|
#
|
|
|
|
|
hint.arswitch.0.at="mdio0"
|
|
|
|
|
hint.arswitch.0.is_7240=1 # We need to be explicitly told this
|
|
|
|
|
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3)
|
|
|
|
|
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY
|
|
|
|
|
hint.arswitch.0.is_rgmii=0 # No, not RGMII
|
|
|
|
|
hint.arswitch.0.is_gmii=0 # No, not GMII
|
|
|
|
|
|
|
|
|
|
# ath0 hint - pcie slot 0
|
|
|
|
|
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000
|
|
|
|
|
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
|
|
|
|
|
|
|
|
|
|
# ath0 - eeprom comes from here
|
|
|
|
|
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
|
|
|
|
|
|
|
|
|
|
# Signal leds
|
|
|
|
|
hint.gpioled.0.at="gpiobus0"
|
|
|
|
|
hint.gpioled.0.name="sig1"
|
|
|
|
|
hint.gpioled.0.pins=0x0001 # pin 0
|
|
|
|
|
hint.gpioled.1.at="gpiobus0"
|
|
|
|
|
hint.gpioled.1.name="sig2"
|
|
|
|
|
hint.gpioled.1.pins=0x0002 # pin 1
|
|
|
|
|
hint.gpioled.2.at="gpiobus0"
|
|
|
|
|
hint.gpioled.2.name="sig3"
|
|
|
|
|
hint.gpioled.2.pins=0x0800 # pin 11
|
|
|
|
|
hint.gpioled.3.at="gpiobus0"
|
|
|
|
|
hint.gpioled.3.name="sig4"
|
|
|
|
|
hint.gpioled.3.pins=0x0080 # pin 7
|
|
|
|
|
|
|
|
|
|
# nvram mapping - XXX ?
|
|
|
|
|
#hint.nvram.0.base=0x1f030000
|
|
|
|
|
#hint.nvram.0.maxsize=0x2000
|
|
|
|
|
#hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
|
|
|
|
|
#hint.nvram.1.base=0x1f032000
|
|
|
|
|
#hint.nvram.1.maxsize=0x4000
|
|
|
|
|
#hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
|
|
|
|
|
|
|
|
|
|
# GEOM_MAP
|
|
|
|
|
#
|
|
|
|
|
# The default bootargs:
|
|
|
|
|
#
|
|
|
|
|
# bootargs=console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/etc/preinit mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART) board=ENH200
|
|
|
|
|
#
|
|
|
|
|
# However there's not a lot of space in this image layout.
|
|
|
|
|
#
|
|
|
|
|
# Thus, an alternate layout will be used, complete with reconfiguring
|
|
|
|
|
# uboot to use the new base address.
|
|
|
|
|
#
|
|
|
|
|
# 256k - uboot (0x000000 -> 0x040000)
|
|
|
|
|
# 64k - uboot-env (0x040000 -> 0x050000)
|
|
|
|
|
# 1728k - kernel (0x050000 -> 0x200000)
|
|
|
|
|
# 6016k - rootfs (0x200000 -> 0x7e0000)
|
|
|
|
|
# 64k - config (0x7e0000 -> 0x7f0000)
|
|
|
|
|
# 64k - ART (0x7f0000 -> 0x800000)
|
|
|
|
|
#
|
|
|
|
|
# For this, the 'bootcmd' environment variable needs to be
|
|
|
|
|
# changed to point to the new location:
|
|
|
|
|
#
|
|
|
|
|
# ar7240> setenv bootcmd 'bootm 0x9f050000'
|
|
|
|
|
|
|
|
|
|
# uboot (256k)
|
|
|
|
|
hint.map.0.at="flash/spi0"
|
|
|
|
|
hint.map.0.start=0x00000000
|
|
|
|
|
hint.map.0.end=0x00040000
|
|
|
|
|
hint.map.0.name="uboot"
|
|
|
|
|
hint.map.0.readonly=1
|
|
|
|
|
|
|
|
|
|
# uboot-env (64k)
|
|
|
|
|
hint.map.1.at="flash/spi0"
|
|
|
|
|
hint.map.1.start=0x00040000
|
|
|
|
|
hint.map.1.end=0x00050000
|
|
|
|
|
hint.map.1.name="uboot-env"
|
|
|
|
|
hint.map.1.readonly=1
|
|
|
|
|
|
|
|
|
|
# kernel (1728k)
|
|
|
|
|
hint.map.2.at="flash/spi0"
|
|
|
|
|
hint.map.2.start=0x00050000
|
|
|
|
|
hint.map.2.end=0x00200000
|
|
|
|
|
hint.map.2.name="kernel"
|
|
|
|
|
|
|
|
|
|
# rootfs (6016k)
|
|
|
|
|
hint.map.3.at="flash/spi0"
|
|
|
|
|
hint.map.3.start=0x00200000
|
|
|
|
|
hint.map.3.end=0x007e0000
|
|
|
|
|
hint.map.3.name="rootfs"
|
|
|
|
|
|
|
|
|
|
# config (64k)
|
|
|
|
|
hint.map.4.at="flash/spi0"
|
|
|
|
|
hint.map.4.start=0x007e0000
|
|
|
|
|
hint.map.4.end=0x007f0000
|
|
|
|
|
hint.map.4.name="cfg"
|
|
|
|
|
|
|
|
|
|
# ART (64k)
|
2013-07-04 08:42:20 +00:00
|
|
|
hint.map.5.at="flash/spi0"
|
|
|
|
|
hint.map.5.start=0x007f0000
|
|
|
|
|
hint.map.5.end=0x00800000
|
|
|
|
|
hint.map.5.name="ART"
|
|
|
|
|
hint.map.5.readonly=1
|
