freebsd-nq/sys/netinet6/udp6_usrreq.c

1280 lines
33 KiB
C
Raw Normal View History

/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
* Copyright (c) 2010-2011 Juniper Networks, Inc.
* Copyright (c) 2014 Kevin Lo
* All rights reserved.
*
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
* Portions of this software were developed by Robert N. M. Watson under
* contract to Juniper Networks, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
2007-12-10 16:03:40 +00:00
*
* $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
*/
/*-
* Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
* The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)udp_usrreq.c 8.6 (Berkeley) 5/23/95
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipfw.h"
#include "opt_ipsec.h"
#include "opt_rss.h"
#include <sys/param.h>
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
#include <sys/jail.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/sdt.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/systm.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_types.h>
#include <net/route.h>
#include <net/rss_config.h>
#include <netinet/in.h>
#include <netinet/in_kdtrace.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_icmp.h>
#include <netinet/ip6.h>
#include <netinet/icmp_var.h>
#include <netinet/icmp6.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet/udplite.h>
#include <netinet6/ip6protosw.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/in6_rss.h>
#include <netinet6/udp6_var.h>
#include <netinet6/scope6_var.h>
#ifdef IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#endif /* IPSEC */
#include <security/mac/mac_framework.h>
/*
* UDP protocol implementation.
* Per RFC 768, August, 1980.
*/
extern struct protosw inetsw[];
static void udp6_detach(struct socket *so);
static int
udp6_append(struct inpcb *inp, struct mbuf *n, int off,
struct sockaddr_in6 *fromsa)
{
struct socket *so;
struct mbuf *opts;
struct udpcb *up;
INP_LOCK_ASSERT(inp);
/*
* Engage the tunneling protocol.
*/
up = intoudpcb(inp);
if (up->u_tun_func != NULL) {
in_pcbref(inp);
INP_RUNLOCK(inp);
(*up->u_tun_func)(n, off, inp, (struct sockaddr *)fromsa,
up->u_tun_ctx);
INP_RLOCK(inp);
return (in_pcbrele_rlocked(inp));
}
#ifdef IPSEC
/* Check AH/ESP integrity. */
if (ipsec6_in_reject(n, inp)) {
m_freem(n);
return (0);
}
#endif /* IPSEC */
#ifdef MAC
if (mac_inpcb_check_deliver(inp, n) != 0) {
m_freem(n);
return (0);
}
#endif
opts = NULL;
if (inp->inp_flags & INP_CONTROLOPTS ||
inp->inp_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(inp, n, &opts);
m_adj(n, off + sizeof(struct udphdr));
so = inp->inp_socket;
SOCKBUF_LOCK(&so->so_rcv);
if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
opts) == 0) {
SOCKBUF_UNLOCK(&so->so_rcv);
m_freem(n);
if (opts)
m_freem(opts);
UDPSTAT_INC(udps_fullsock);
} else
sorwakeup_locked(so);
return (0);
}
int
udp6_input(struct mbuf **mp, int *offp, int proto)
{
struct mbuf *m = *mp;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ifnet *ifp;
struct ip6_hdr *ip6;
struct udphdr *uh;
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
struct udpcb *up;
int off = *offp;
int cscov_partial;
int plen, ulen;
2003-11-02 19:09:29 +00:00
struct sockaddr_in6 fromsa;
struct m_tag *fwd_tag;
uint16_t uh_sum;
uint8_t nxt;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
ifp = m->m_pkthdr.rcvif;
ip6 = mtod(m, struct ip6_hdr *);
#ifndef PULLDOWN_TEST
IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
ip6 = mtod(m, struct ip6_hdr *);
uh = (struct udphdr *)((caddr_t)ip6 + off);
#else
IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
if (!uh)
return (IPPROTO_DONE);
#endif
UDPSTAT_INC(udps_ipackets);
/*
* Destination port of 0 is illegal, based on RFC768.
*/
if (uh->uh_dport == 0)
goto badunlocked;
plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
ulen = ntohs((u_short)uh->uh_ulen);
nxt = proto;
cscov_partial = (nxt == IPPROTO_UDPLITE) ? 1 : 0;
if (nxt == IPPROTO_UDPLITE) {
/* Zero means checksum over the complete packet. */
if (ulen == 0)
ulen = plen;
if (ulen == plen)
cscov_partial = 0;
if ((ulen < sizeof(struct udphdr)) || (ulen > plen)) {
/* XXX: What is the right UDPLite MIB counter? */
goto badunlocked;
}
if (uh->uh_sum == 0) {
/* XXX: What is the right UDPLite MIB counter? */
goto badunlocked;
}
} else {
if ((ulen < sizeof(struct udphdr)) || (plen != ulen)) {
UDPSTAT_INC(udps_badlen);
goto badunlocked;
}
if (uh->uh_sum == 0) {
UDPSTAT_INC(udps_nosum);
goto badunlocked;
}
}
if ((m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) &&
!cscov_partial) {
if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR)
uh_sum = m->m_pkthdr.csum_data;
else
uh_sum = in6_cksum_pseudo(ip6, ulen, nxt,
m->m_pkthdr.csum_data);
uh_sum ^= 0xffff;
} else
uh_sum = in6_cksum_partial(m, nxt, off, plen, ulen);
if (uh_sum != 0) {
UDPSTAT_INC(udps_badsum);
goto badunlocked;
}
/*
* Construct sockaddr format source address.
*/
init_sin6(&fromsa, m);
fromsa.sin6_port = uh->uh_sport;
pcbinfo = udp_get_inpcbinfo(nxt);
if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
struct inpcb *last;
struct inpcbhead *pcblist;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ip6_moptions *imo;
INP_INFO_RLOCK(pcbinfo);
/*
* In the event that laddr should be set to the link-local
* address (this happens in RIPng), the multicast address
* specified in the received packet will not match laddr. To
* handle this situation, matching is relaxed if the
* receiving interface is the same as one specified in the
* socket and if the destination multicast address matches
* one of the multicast groups specified in the socket.
*/
/*
* KAME note: traditionally we dropped udpiphdr from mbuf
* here. We need udphdr for IPsec processing so we do that
* later.
*/
pcblist = udp_get_pcblist(nxt);
last = NULL;
LIST_FOREACH(inp, pcblist, inp_list) {
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (inp->inp_lport != uh->uh_dport)
continue;
if (inp->inp_fport != 0 &&
inp->inp_fport != uh->uh_sport)
continue;
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
&ip6->ip6_dst))
continue;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
&ip6->ip6_src) ||
inp->inp_fport != uh->uh_sport)
continue;
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
/*
* XXXRW: Because we weren't holding either the inpcb
* or the hash lock when we checked for a match
* before, we should probably recheck now that the
* inpcb lock is (supposed to be) held.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Handle socket delivery policy for any-source
* and source-specific multicast. [RFC3678]
*/
imo = inp->in6p_moptions;
if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
struct sockaddr_in6 mcaddr;
int blocked;
INP_RLOCK(inp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
bzero(&mcaddr, sizeof(struct sockaddr_in6));
mcaddr.sin6_len = sizeof(struct sockaddr_in6);
mcaddr.sin6_family = AF_INET6;
mcaddr.sin6_addr = ip6->ip6_dst;
blocked = im6o_mc_filter(imo, ifp,
(struct sockaddr *)&mcaddr,
(struct sockaddr *)&fromsa);
if (blocked != MCAST_PASS) {
if (blocked == MCAST_NOTGMEMBER)
IP6STAT_INC(ip6s_notmember);
if (blocked == MCAST_NOTSMEMBER ||
blocked == MCAST_MUTED)
UDPSTAT_INC(udps_filtermcast);
INP_RUNLOCK(inp); /* XXX */
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
continue;
}
INP_RUNLOCK(inp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
if (last != NULL) {
struct mbuf *n;
if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
INP_RLOCK(last);
UDP_PROBE(receive, NULL, last, ip6,
last, uh);
if (udp6_append(last, n, off, &fromsa))
goto inp_lost;
INP_RUNLOCK(last);
}
}
last = inp;
/*
* Don't look for additional matches if this one does
* not have either the SO_REUSEPORT or SO_REUSEADDR
* socket options set. This heuristic avoids
* searching through all pcbs in the common case of a
* non-shared port. It assumes that an application
* will never clear these options after setting them.
*/
if ((last->inp_socket->so_options &
(SO_REUSEPORT|SO_REUSEADDR)) == 0)
break;
}
if (last == NULL) {
/*
* No matching pcb found; discard datagram. (No need
* to send an ICMP Port Unreachable for a broadcast
* or multicast datgram.)
*/
UDPSTAT_INC(udps_noport);
UDPSTAT_INC(udps_noportmcast);
goto badheadlocked;
}
INP_RLOCK(last);
INP_INFO_RUNLOCK(pcbinfo);
UDP_PROBE(receive, NULL, last, ip6, last, uh);
if (udp6_append(last, m, off, &fromsa) == 0)
INP_RUNLOCK(last);
inp_lost:
return (IPPROTO_DONE);
}
/*
* Locate pcb for datagram.
*/
/*
* Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain.
*/
if ((m->m_flags & M_IP6_NEXTHOP) &&
(fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) {
struct sockaddr_in6 *next_hop6;
next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1);
/*
* Transparently forwarded. Pretend to be the destination.
* Already got one like this?
*/
inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m);
if (!inp) {
/*
* It's new. Try to find the ambushing socket.
* Because we've rewritten the destination address,
* any hardware-generated hash is ignored.
*/
inp = in6_pcblookup(pcbinfo, &ip6->ip6_src,
uh->uh_sport, &next_hop6->sin6_addr,
next_hop6->sin6_port ? htons(next_hop6->sin6_port) :
uh->uh_dport, INPLOOKUP_WILDCARD |
INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif);
}
/* Remove the tag from the packet. We don't need it anymore. */
m_tag_delete(m, fwd_tag);
m->m_flags &= ~M_IP6_NEXTHOP;
} else
inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
m->m_pkthdr.rcvif, m);
if (inp == NULL) {
if (udp_log_in_vain) {
char ip6bufs[INET6_ADDRSTRLEN];
char ip6bufd[INET6_ADDRSTRLEN];
log(LOG_INFO,
"Connection attempt to UDP [%s]:%d from [%s]:%d\n",
ip6_sprintf(ip6bufd, &ip6->ip6_dst),
ntohs(uh->uh_dport),
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ntohs(uh->uh_sport));
}
UDPSTAT_INC(udps_noport);
if (m->m_flags & M_MCAST) {
printf("UDP6: M_MCAST is set in a unicast packet.\n");
UDPSTAT_INC(udps_noportmcast);
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
goto badunlocked;
}
if (V_udp_blackhole)
goto badunlocked;
if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
goto badunlocked;
icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
return (IPPROTO_DONE);
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_RLOCK_ASSERT(inp);
up = intoudpcb(inp);
if (cscov_partial) {
if (up->u_rxcslen == 0 || up->u_rxcslen > ulen) {
INP_RUNLOCK(inp);
m_freem(m);
return (IPPROTO_DONE);
}
}
UDP_PROBE(receive, NULL, inp, ip6, inp, uh);
if (udp6_append(inp, m, off, &fromsa) == 0)
INP_RUNLOCK(inp);
return (IPPROTO_DONE);
badheadlocked:
INP_INFO_RUNLOCK(pcbinfo);
badunlocked:
if (m)
m_freem(m);
return (IPPROTO_DONE);
}
static void
udp6_common_ctlinput(int cmd, struct sockaddr *sa, void *d,
struct inpcbinfo *pcbinfo)
{
struct udphdr uh;
struct ip6_hdr *ip6;
struct mbuf *m;
int off = 0;
struct ip6ctlparam *ip6cp = NULL;
const struct sockaddr_in6 *sa6_src = NULL;
void *cmdarg;
2008-01-08 19:08:58 +00:00
struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
struct udp_portonly {
u_int16_t uh_sport;
u_int16_t uh_dport;
} *uhp;
if (sa->sa_family != AF_INET6 ||
sa->sa_len != sizeof(struct sockaddr_in6))
return;
if ((unsigned)cmd >= PRC_NCMDS)
return;
if (PRC_IS_REDIRECT(cmd))
notify = in6_rtchange, d = NULL;
else if (cmd == PRC_HOSTDEAD)
d = NULL;
else if (inet6ctlerrmap[cmd] == 0)
return;
/* if the parameter is from icmp6, decode it. */
if (d != NULL) {
ip6cp = (struct ip6ctlparam *)d;
m = ip6cp->ip6c_m;
ip6 = ip6cp->ip6c_ip6;
off = ip6cp->ip6c_off;
cmdarg = ip6cp->ip6c_cmdarg;
sa6_src = ip6cp->ip6c_src;
} else {
m = NULL;
ip6 = NULL;
cmdarg = NULL;
sa6_src = &sa6_any;
}
if (ip6) {
/*
* XXX: We assume that when IPV6 is non NULL,
* M and OFF are valid.
*/
/* Check if we can safely examine src and dst ports. */
if (m->m_pkthdr.len < off + sizeof(*uhp))
return;
bzero(&uh, sizeof(uh));
m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
(void)in6_pcbnotify(pcbinfo, sa, uh.uh_dport,
(struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
cmdarg, notify);
} else
(void)in6_pcbnotify(pcbinfo, sa, 0,
(const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
}
void
udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
{
return (udp6_common_ctlinput(cmd, sa, d, &V_udbinfo));
}
void
udplite6_ctlinput(int cmd, struct sockaddr *sa, void *d)
{
return (udp6_common_ctlinput(cmd, sa, d, &V_ulitecbinfo));
}
static int
udp6_getcred(SYSCTL_HANDLER_ARGS)
{
struct xucred xuc;
struct sockaddr_in6 addrs[2];
struct inpcb *inp;
int error;
error = priv_check(req->td, PRIV_NETINET_GETCRED);
if (error)
return (error);
if (req->newlen != sizeof(addrs))
return (EINVAL);
if (req->oldlen != sizeof(struct xucred))
return (EINVAL);
error = SYSCTL_IN(req, addrs, sizeof(addrs));
if (error)
return (error);
if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
(error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
return (error);
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr,
addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port,
INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL);
if (inp != NULL) {
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_RLOCK_ASSERT(inp);
if (inp->inp_socket == NULL)
error = ENOENT;
if (error == 0)
error = cr_canseesocket(req->td->td_ucred,
inp->inp_socket);
if (error == 0)
cru2x(inp->inp_cred, &xuc);
INP_RUNLOCK(inp);
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
} else
error = ENOENT;
if (error == 0)
error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
return (error);
}
SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
static int
udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
struct mbuf *control, struct thread *td)
{
u_int32_t ulen = m->m_pkthdr.len;
u_int32_t plen = sizeof(struct udphdr) + ulen;
struct ip6_hdr *ip6;
struct udphdr *udp6;
struct in6_addr *laddr, *faddr, in6a;
struct sockaddr_in6 *sin6 = NULL;
int cscov_partial = 0;
int scope_ambiguous = 0;
u_short fport;
int error = 0;
uint8_t nxt;
uint16_t cscov = 0;
struct ip6_pktopts *optp, opt;
int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
int flags;
struct sockaddr_in6 tmp;
INP_WLOCK_ASSERT(inp);
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
if (addr6) {
/* addr6 has been validated in udp6_send(). */
sin6 = (struct sockaddr_in6 *)addr6;
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
/*
* Application should provide a proper zone ID or the use of
* default zone IDs should be enabled. Unfortunately, some
* applications do not behave as it should, so we need a
* workaround. Even if an appropriate ID is not determined,
* we'll see if we can determine the outgoing interface. If we
* can, determine the zone ID based on the interface below.
*/
if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
return (error);
}
nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
IPPROTO_UDP : IPPROTO_UDPLITE;
if (control) {
if ((error = ip6_setpktopts(control, &opt,
inp->in6p_outputopts, td->td_ucred, nxt)) != 0)
goto release;
optp = &opt;
} else
optp = inp->in6p_outputopts;
if (sin6) {
faddr = &sin6->sin6_addr;
/*
* Since we saw no essential reason for calling in_pcbconnect,
* we get rid of such kind of logic, and call in6_selectsrc
* and in6_pcbsetport in order to fill in the local address
* and the local port.
*/
if (sin6->sin6_port == 0) {
error = EADDRNOTAVAIL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
/* how about ::ffff:0.0.0.0 case? */
error = EISCONN;
goto release;
}
fport = sin6->sin6_port; /* allow 0 port */
if (IN6_IS_ADDR_V4MAPPED(faddr)) {
if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
/*
* I believe we should explicitly discard the
* packet when mapped addresses are disabled,
* rather than send the packet as an IPv6 one.
* If we chose the latter approach, the packet
* might be sent out on the wire based on the
* default route, the situation which we'd
* probably want to avoid.
* (20010421 jinmei@kame.net)
*/
error = EINVAL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
!IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
/*
* when remote addr is an IPv4-mapped address,
* local addr should not be an IPv6 address,
* since you cannot determine how to map IPv6
* source address to IPv4.
*/
error = EINVAL;
goto release;
}
af = AF_INET;
}
if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
error = in6_selectsrc_socket(sin6, optp, inp,
td->td_ucred, scope_ambiguous, &in6a, NULL);
if (error)
goto release;
laddr = &in6a;
} else
laddr = &inp->in6p_laddr; /* XXX */
if (laddr == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto release;
}
if (inp->inp_lport == 0 &&
(error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) {
/* Undo an address bind that may have occurred. */
inp->in6p_laddr = in6addr_any;
goto release;
}
} else {
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = ENOTCONN;
goto release;
}
if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
/*
* XXX: this case would happen when the
* application sets the V6ONLY flag after
* connecting the foreign address.
* Such applications should be fixed,
* so we bark here.
*/
log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
"option was set for a connected socket\n");
error = EINVAL;
goto release;
} else
af = AF_INET;
}
laddr = &inp->in6p_laddr;
faddr = &inp->in6p_faddr;
fport = inp->inp_fport;
}
if (af == AF_INET)
hlen = sizeof(struct ip);
/*
* Calculate data length and get a mbuf
* for UDP and IP6 headers.
*/
M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
if (m == NULL) {
error = ENOBUFS;
goto release;
}
/*
* Stuff checksum and output datagram.
*/
udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
udp6->uh_dport = fport;
if (nxt == IPPROTO_UDPLITE) {
struct udpcb *up;
up = intoudpcb(inp);
cscov = up->u_txcslen;
if (cscov >= plen)
cscov = 0;
udp6->uh_ulen = htons(cscov);
/*
* For UDP-Lite, checksum coverage length of zero means
* the entire UDPLite packet is covered by the checksum.
*/
cscov_partial = (cscov == 0) ? 0 : 1;
} else if (plen <= 0xffff)
udp6->uh_ulen = htons((u_short)plen);
else
udp6->uh_ulen = 0;
udp6->uh_sum = 0;
switch (af) {
case AF_INET6:
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = inp->inp_flow & IPV6_FLOWINFO_MASK;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
ip6->ip6_plen = htons((u_short)plen);
ip6->ip6_nxt = nxt;
ip6->ip6_hlim = in6_selecthlim(inp, NULL);
ip6->ip6_src = *laddr;
ip6->ip6_dst = *faddr;
if (cscov_partial) {
if ((udp6->uh_sum = in6_cksum_partial(m, nxt,
sizeof(struct ip6_hdr), plen, cscov)) == 0)
udp6->uh_sum = 0xffff;
} else {
udp6->uh_sum = in6_cksum_pseudo(ip6, plen, nxt, 0);
m->m_pkthdr.csum_flags = CSUM_UDP_IPV6;
m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum);
}
#ifdef RSS
{
uint32_t hash_val, hash_type;
uint8_t pr;
pr = inp->inp_socket->so_proto->pr_protocol;
/*
* Calculate an appropriate RSS hash for UDP and
* UDP Lite.
*
* The called function will take care of figuring out
* whether a 2-tuple or 4-tuple hash is required based
* on the currently configured scheme.
*
* Later later on connected socket values should be
* cached in the inpcb and reused, rather than constantly
* re-calculating it.
*
* UDP Lite is a different protocol number and will
* likely end up being hashed as a 2-tuple until
* RSS / NICs grow UDP Lite protocol awareness.
*/
if (rss_proto_software_hash_v6(faddr, laddr, fport,
inp->inp_lport, pr, &hash_val, &hash_type) == 0) {
m->m_pkthdr.flowid = hash_val;
M_HASHTYPE_SET(m, hash_type);
}
}
#endif
flags = 0;
#ifdef RSS
/*
* Don't override with the inp cached flowid.
*
* Until the whole UDP path is vetted, it may actually
* be incorrect.
*/
flags |= IP_NODEFAULTFLOWID;
#endif
UDP_PROBE(send, NULL, inp, ip6, inp, udp6);
UDPSTAT_INC(udps_opackets);
error = ip6_output(m, optp, &inp->inp_route6, flags,
inp->in6p_moptions, NULL, inp);
break;
case AF_INET:
error = EAFNOSUPPORT;
goto release;
}
goto releaseopt;
release:
m_freem(m);
releaseopt:
if (control) {
ip6_clearpktopts(&opt, -1);
m_freem(control);
}
return (error);
}
static void
udp6_abort(struct socket *so)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
INP_WLOCK(inp);
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
uint8_t nxt;
nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
IPPROTO_UDP : IPPROTO_UDPLITE;
INP_WUNLOCK(inp);
pru = inetsw[ip_protox[nxt]].pr_usrreqs;
(*pru->pru_abort)(so);
return;
}
#endif
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
INP_HASH_WLOCK(pcbinfo);
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
INP_HASH_WUNLOCK(pcbinfo);
soisdisconnected(so);
}
INP_WUNLOCK(inp);
}
static int
udp6_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
int error;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
error = soreserve(so, udp_sendspace, udp_recvspace);
if (error)
return (error);
}
INP_INFO_WLOCK(pcbinfo);
error = in_pcballoc(so, pcbinfo);
if (error) {
INP_INFO_WUNLOCK(pcbinfo);
return (error);
}
inp = (struct inpcb *)so->so_pcb;
inp->inp_vflag |= INP_IPV6;
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
inp->inp_vflag |= INP_IPV4;
inp->in6p_hops = -1; /* use kernel default */
inp->in6p_cksum = -1; /* just to be sure */
/*
* XXX: ugly!!
* IPv4 TTL initialization is necessary for an IPv6 socket as well,
* because the socket may be bound to an IPv6 wildcard address,
* which may match an IPv4-mapped IPv6 address.
*/
inp->inp_ip_ttl = V_ip_defttl;
error = udp_newudpcb(inp);
if (error) {
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(pcbinfo);
return (error);
}
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(pcbinfo);
return (0);
}
static int
udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
int error;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
INP_WLOCK(inp);
INP_HASH_WLOCK(pcbinfo);
inp->inp_vflag &= ~INP_IPV4;
inp->inp_vflag |= INP_IPV6;
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
struct sockaddr_in6 *sin6_p;
sin6_p = (struct sockaddr_in6 *)nam;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
inp->inp_vflag |= INP_IPV4;
#ifdef INET
else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
struct sockaddr_in sin;
in6_sin6_2_sin(&sin, sin6_p);
inp->inp_vflag |= INP_IPV4;
inp->inp_vflag &= ~INP_IPV6;
error = in_pcbbind(inp, (struct sockaddr *)&sin,
td->td_ucred);
goto out;
}
#endif
}
error = in6_pcbbind(inp, nam, td->td_ucred);
#ifdef INET
out:
#endif
INP_HASH_WUNLOCK(pcbinfo);
INP_WUNLOCK(inp);
return (error);
}
static void
udp6_close(struct socket *so)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
INP_WLOCK(inp);
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
uint8_t nxt;
nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
IPPROTO_UDP : IPPROTO_UDPLITE;
INP_WUNLOCK(inp);
pru = inetsw[ip_protox[nxt]].pr_usrreqs;
(*pru->pru_disconnect)(so);
return;
}
#endif
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
INP_HASH_WLOCK(pcbinfo);
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
INP_HASH_WUNLOCK(pcbinfo);
soisdisconnected(so);
}
INP_WUNLOCK(inp);
}
static int
udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
struct sockaddr_in6 *sin6;
int error;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
sin6 = (struct sockaddr_in6 *)nam;
KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
/*
* XXXRW: Need to clarify locking of v4/v6 flags.
*/
INP_WLOCK(inp);
#ifdef INET
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) {
error = EINVAL;
goto out;
}
if (inp->inp_faddr.s_addr != INADDR_ANY) {
error = EISCONN;
goto out;
}
in6_sin6_2_sin(&sin, sin6);
inp->inp_vflag |= INP_IPV4;
inp->inp_vflag &= ~INP_IPV6;
error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
if (error != 0)
goto out;
INP_HASH_WLOCK(pcbinfo);
error = in_pcbconnect(inp, (struct sockaddr *)&sin,
td->td_ucred);
INP_HASH_WUNLOCK(pcbinfo);
if (error == 0)
soisconnected(so);
goto out;
}
#endif
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = EISCONN;
goto out;
}
inp->inp_vflag &= ~INP_IPV4;
inp->inp_vflag |= INP_IPV6;
error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
if (error != 0)
goto out;
INP_HASH_WLOCK(pcbinfo);
error = in6_pcbconnect(inp, nam, td->td_ucred);
INP_HASH_WUNLOCK(pcbinfo);
if (error == 0)
soisconnected(so);
out:
INP_WUNLOCK(inp);
return (error);
}
static void
udp6_detach(struct socket *so)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
struct udpcb *up;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
INP_INFO_WLOCK(pcbinfo);
INP_WLOCK(inp);
up = intoudpcb(inp);
KASSERT(up != NULL, ("%s: up == NULL", __func__));
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(pcbinfo);
udp_discardcb(up);
}
static int
udp6_disconnect(struct socket *so)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
int error;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
INP_WLOCK(inp);
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
uint8_t nxt;
nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
IPPROTO_UDP : IPPROTO_UDPLITE;
INP_WUNLOCK(inp);
pru = inetsw[ip_protox[nxt]].pr_usrreqs;
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
(void)(*pru->pru_disconnect)(so);
return (0);
}
#endif
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = ENOTCONN;
goto out;
}
INP_HASH_WLOCK(pcbinfo);
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
INP_HASH_WUNLOCK(pcbinfo);
SOCK_LOCK(so);
so->so_state &= ~SS_ISCONNECTED; /* XXX */
SOCK_UNLOCK(so);
out:
INP_WUNLOCK(inp);
return (0);
}
static int
udp6_send(struct socket *so, int flags, struct mbuf *m,
struct sockaddr *addr, struct mbuf *control, struct thread *td)
{
struct inpcb *inp;
struct inpcbinfo *pcbinfo;
int error = 0;
pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
INP_WLOCK(inp);
if (addr) {
if (addr->sa_len != sizeof(struct sockaddr_in6)) {
error = EINVAL;
goto bad;
}
if (addr->sa_family != AF_INET6) {
error = EAFNOSUPPORT;
goto bad;
}
}
#ifdef INET
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
int hasv4addr;
struct sockaddr_in6 *sin6 = 0;
if (addr == 0)
hasv4addr = (inp->inp_vflag & INP_IPV4);
else {
sin6 = (struct sockaddr_in6 *)addr;
hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
? 1 : 0;
}
if (hasv4addr) {
struct pr_usrreqs *pru;
uint8_t nxt;
nxt = (inp->inp_socket->so_proto->pr_protocol ==
IPPROTO_UDP) ? IPPROTO_UDP : IPPROTO_UDPLITE;
/*
* XXXRW: We release UDP-layer locks before calling
* udp_send() in order to avoid recursion. However,
* this does mean there is a short window where inp's
* fields are unstable. Could this lead to a
* potential race in which the factors causing us to
* select the UDPv4 output routine are invalidated?
*/
INP_WUNLOCK(inp);
if (sin6)
in6_sin6_2_sin_in_sock(addr);
pru = inetsw[ip_protox[nxt]].pr_usrreqs;
/* addr will just be freed in sendit(). */
return ((*pru->pru_send)(so, flags, m, addr, control,
td));
}
}
#endif
#ifdef MAC
mac_inpcb_create_mbuf(inp, m);
#endif
INP_HASH_WLOCK(pcbinfo);
error = udp6_output(inp, m, addr, control, td);
INP_HASH_WUNLOCK(pcbinfo);
INP_WUNLOCK(inp);
return (error);
bad:
INP_WUNLOCK(inp);
m_freem(m);
return (error);
}
struct pr_usrreqs udp6_usrreqs = {
.pru_abort = udp6_abort,
.pru_attach = udp6_attach,
.pru_bind = udp6_bind,
.pru_connect = udp6_connect,
.pru_control = in6_control,
.pru_detach = udp6_detach,
.pru_disconnect = udp6_disconnect,
.pru_peeraddr = in6_mapped_peeraddr,
.pru_send = udp6_send,
.pru_shutdown = udp_shutdown,
.pru_sockaddr = in6_mapped_sockaddr,
.pru_soreceive = soreceive_dgram,
.pru_sosend = sosend_dgram,
.pru_sosetlabel = in_pcbsosetlabel,
.pru_close = udp6_close
};