d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c1e968fb62
freebsd-nq/sys/dev/pci/pci_iov_private.h

63 lines
1.9 KiB
C
Raw Normal View History

Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
/*-
Clean up repeated "All rights reserved"
2016-03-14 17:41:17 +00:00
* Copyright (c) 2013-2015 Sandvine Inc.
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _PCI_IOV_PRIVATE_H_
#define _PCI_IOV_PRIVATE_H_
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
struct pci_iov_bar {
struct resource *res;
pci_addr_t bar_size;
pci_addr_t bar_shift;
};
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
struct pcicfg_iov {
struct cdev *iov_cdev;
Add infrastructure for exporting config schema from PF drivers Differential Revision: https://reviews.freebsd.org/D80 MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:42 +00:00
nvlist_t *iov_schema;
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
struct pci_iov_bar iov_bar[PCIR_MAX_BAR_0 + 1];
struct rman rman;
char rman_name[64];
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
int iov_pos;
int iov_num_vfs;
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
uint32_t iov_flags;
Save and restore SRIOV-related config registers. Save the value of the IOV control and page size registers and restore them (along with the VF count) in pci_cfg_save/pci_cfg_restore. This ensures ARI remains enabled if a PF driver resets itself during the PCI_IOV_INIT callback. This might also properly restore SRIOV state across suspend/resume. Reviewed by: rstone, vangyzen Differential Revision: https://reviews.freebsd.org/D6192
2016-05-03 19:45:24 +00:00
uint16_t iov_ctl;
uint32_t iov_page_size;
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
};
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
#define IOV_RMAN_INITED 0x0001
Add interface to destroy SR-IOV VFs Differential Revision: https://reviews.freebsd.org/D79 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:34 +00:00
#define IOV_BUSY 0x0002
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
Save and restore SRIOV-related config registers. Save the value of the IOV control and page size registers and restore them (along with the VF count) in pci_cfg_save/pci_cfg_restore. This ensures ARI remains enabled if a PF driver resets itself during the PCI_IOV_INIT callback. This might also properly restore SRIOV state across suspend/resume. Reviewed by: rstone, vangyzen Differential Revision: https://reviews.freebsd.org/D6192
2016-05-03 19:45:24 +00:00
void pci_iov_cfg_restore(device_t dev, struct pci_devinfo *dinfo);
void pci_iov_cfg_save(device_t dev, struct pci_devinfo *dinfo);
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
#endif
Reference in New Issue Copy Permalink