freebsd-nq/sys/net80211/ieee80211_freebsd.h

357 lines
13 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2003-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_FREEBSD_H_
#define _NET80211_IEEE80211_FREEBSD_H_
#ifdef _KERNEL
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*
* Common state locking definitions.
*/
typedef struct mtx ieee80211_com_lock_t;
#define IEEE80211_LOCK_INIT(_ic, _name) \
mtx_init(&(_ic)->ic_comlock, _name, "802.11 com lock", MTX_DEF)
#define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(&(_ic)->ic_comlock)
#define IEEE80211_LOCK(_ic) mtx_lock(&(_ic)->ic_comlock)
#define IEEE80211_UNLOCK(_ic) mtx_unlock(&(_ic)->ic_comlock)
#define IEEE80211_LOCK_ASSERT(_ic) \
mtx_assert(&(_ic)->ic_comlock, MA_OWNED)
/*
* Beacon locking definitions.
*/
typedef struct mtx ieee80211_beacon_lock_t;
#define IEEE80211_BEACON_LOCK_INIT(_ic, _name) \
mtx_init(&(_ic)->ic_beaconlock, _name, "802.11 beacon lock", MTX_DEF)
#define IEEE80211_BEACON_LOCK_DESTROY(_ic) mtx_destroy(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_LOCK(_ic) mtx_lock(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_UNLOCK(_ic) mtx_unlock(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_LOCK_ASSERT(_ic) \
mtx_assert(&(_ic)->ic_beaconlock, MA_OWNED)
/*
* Node locking definitions.
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
* NB: MTX_DUPOK is because we don't generate per-interface strings.
*/
typedef struct mtx ieee80211_node_lock_t;
#define IEEE80211_NODE_LOCK_INIT(_nt, _name) \
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
mtx_init(&(_nt)->nt_nodelock, _name, "802.11 node table", \
MTX_DEF | MTX_DUPOK)
#define IEEE80211_NODE_LOCK_DESTROY(_nt) mtx_destroy(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_LOCK(_nt) mtx_lock(&(_nt)->nt_nodelock)
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
#define IEEE80211_NODE_IS_LOCKED(_nt) mtx_owned(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_UNLOCK(_nt) mtx_unlock(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_LOCK_ASSERT(_nt) \
mtx_assert(&(_nt)->nt_nodelock, MA_OWNED)
/*
* Node table scangen locking definitions.
*/
typedef struct mtx ieee80211_scan_lock_t;
#define IEEE80211_SCAN_LOCK_INIT(_nt, _name) \
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
mtx_init(&(_nt)->nt_scanlock, _name, "802.11 node scangen", MTX_DEF)
#define IEEE80211_SCAN_LOCK_DESTROY(_nt) mtx_destroy(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_LOCK(_nt) mtx_lock(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_UNLOCK(_nt) mtx_unlock(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_LOCK_ASSERT(_nt) \
mtx_assert(&(_nt)->nt_scanlock, MA_OWNED)
/*
* Per-node power-save queue definitions.
*/
#define IEEE80211_NODE_SAVEQ_INIT(_ni, _name) do { \
mtx_init(&(_ni)->ni_savedq.ifq_mtx, _name, "802.11 ps queue", MTX_DEF);\
(_ni)->ni_savedq.ifq_maxlen = IEEE80211_PS_MAX_QUEUE; \
} while (0)
#define IEEE80211_NODE_SAVEQ_DESTROY(_ni) \
mtx_destroy(&(_ni)->ni_savedq.ifq_mtx)
#define IEEE80211_NODE_SAVEQ_QLEN(_ni) \
_IF_QLEN(&(_ni)->ni_savedq)
#define IEEE80211_NODE_SAVEQ_LOCK(_ni) do { \
IF_LOCK(&(_ni)->ni_savedq); \
} while (0)
#define IEEE80211_NODE_SAVEQ_UNLOCK(_ni) do { \
IF_UNLOCK(&(_ni)->ni_savedq); \
} while (0)
#define IEEE80211_NODE_SAVEQ_DEQUEUE(_ni, _m, _qlen) do { \
IEEE80211_NODE_SAVEQ_LOCK(_ni); \
_IF_DEQUEUE(&(_ni)->ni_savedq, _m); \
(_qlen) = IEEE80211_NODE_SAVEQ_QLEN(_ni); \
IEEE80211_NODE_SAVEQ_UNLOCK(_ni); \
} while (0)
#define IEEE80211_NODE_SAVEQ_DRAIN(_ni, _qlen) do { \
IEEE80211_NODE_SAVEQ_LOCK(_ni); \
(_qlen) = IEEE80211_NODE_SAVEQ_QLEN(_ni); \
_IF_DRAIN(&(_ni)->ni_savedq); \
IEEE80211_NODE_SAVEQ_UNLOCK(_ni); \
} while (0)
/* XXX could be optimized */
#define _IEEE80211_NODE_SAVEQ_DEQUEUE_HEAD(_ni, _m) do { \
_IF_DEQUEUE(&(_ni)->ni_savedq, m); \
} while (0)
#define _IEEE80211_NODE_SAVEQ_ENQUEUE(_ni, _m, _qlen, _age) do {\
(_m)->m_nextpkt = NULL; \
if ((_ni)->ni_savedq.ifq_tail != NULL) { \
_age -= M_AGE_GET((_ni)->ni_savedq.ifq_tail); \
(_ni)->ni_savedq.ifq_tail->m_nextpkt = (_m); \
} else { \
(_ni)->ni_savedq.ifq_head = (_m); \
} \
M_AGE_SET(_m, _age); \
(_ni)->ni_savedq.ifq_tail = (_m); \
(_qlen) = ++(_ni)->ni_savedq.ifq_len; \
} while (0)
#define IEEE80211_TAPQ_INIT(_tap) do { \
mtx_init(&(tap)->txa_q.ifq_mtx, "ampdu tx queue", NULL, MTX_DEF); \
(_tap)->txa_q.ifq_maxlen = IEEE80211_AGGR_BAWMAX; \
} while (0)
#define IEEE80211_TAPQ_DESTROY(_tap) \
mtx_destroy(&(_tap)->txa_q.ifq_mtx)
#ifndef IF_PREPEND_LIST
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
(mtail)->m_nextpkt = (ifq)->ifq_head; \
if ((ifq)->ifq_tail == NULL) \
(ifq)->ifq_tail = (mtail); \
(ifq)->ifq_head = (mhead); \
(ifq)->ifq_len += (mcount); \
} while (0)
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
IF_LOCK(ifq); \
_IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \
IF_UNLOCK(ifq); \
} while (0)
#endif /* IF_PREPEND_LIST */
/*
* 802.1x MAC ACL database locking definitions.
*/
typedef struct mtx acl_lock_t;
#define ACL_LOCK_INIT(_as, _name) \
mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF)
#define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock)
#define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock)
#define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock)
#define ACL_LOCK_ASSERT(_as) \
mtx_assert((&(_as)->as_lock), MA_OWNED)
/*
* Node reference counting definitions.
*
* ieee80211_node_initref initialize the reference count to 1
* ieee80211_node_incref add a reference
* ieee80211_node_decref remove a reference
* ieee80211_node_dectestref remove a reference and return 1 if this
* is the last reference, otherwise 0
* ieee80211_node_refcnt reference count for printing (only)
*/
#include <machine/atomic.h>
#define ieee80211_node_initref(_ni) \
do { ((_ni)->ni_refcnt = 1); } while (0)
#define ieee80211_node_incref(_ni) \
atomic_add_int(&(_ni)->ni_refcnt, 1)
#define ieee80211_node_decref(_ni) \
atomic_subtract_int(&(_ni)->ni_refcnt, 1)
struct ieee80211_node;
2005-04-04 04:27:20 +00:00
int ieee80211_node_dectestref(struct ieee80211_node *ni);
#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt
struct ifqueue;
void ieee80211_drain_ifq(struct ifqueue *);
#define msecs_to_ticks(ms) (((ms)*hz)/1000)
#define ticks_to_msecs(t) ((t) / hz)
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define time_after(a,b) ((long)(b) - (long)(a) < 0)
#define time_before(a,b) time_after(b,a)
#define time_after_eq(a,b) ((long)(a) - (long)(b) >= 0)
#define time_before_eq(a,b) time_after_eq(b,a)
struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* tx path usage */
#define M_LINK0 M_PROTO1 /* WEP requested */
#define M_PWR_SAV M_PROTO4 /* bypass PS handling */
#define M_MORE_DATA M_PROTO5 /* more data frames to follow */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define M_FF 0x20000 /* fast frame */
#define M_TXCB 0x40000 /* do tx complete callback */
#define M_80211_TX (0x60000|M_PROTO1|M_WME_AC_MASK|M_PROTO4|M_PROTO5)
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/* rx path usage */
#define M_AMPDU M_PROTO1 /* A-MPDU processing done */
#define M_WEP M_PROTO2 /* WEP done by hardware */
#define M_80211_RX (M_AMPDU|M_WEP)
/*
* Encode WME access control bits in the PROTO flags.
* This is safe since it's passed directly in to the
* driver and there's no chance someone else will clobber
* them on us.
*/
#define M_WME_AC_MASK (M_PROTO2|M_PROTO3)
/* XXX 5 is wrong if M_PROTO* are redefined */
#define M_WME_AC_SHIFT 5
#define M_WME_SETAC(m, ac) \
((m)->m_flags = ((m)->m_flags &~ M_WME_AC_MASK) | \
((ac) << M_WME_AC_SHIFT))
#define M_WME_GETAC(m) (((m)->m_flags >> M_WME_AC_SHIFT) & 0x3)
/*
* Mbufs on the power save queue are tagged with an age and
* timed out. We reuse the hardware checksum field in the
* mbuf packet header to store this data.
*/
#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v)
#define M_AGE_GET(m) (m->m_pkthdr.csum_data)
#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj)
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */
struct ieee80211_cb {
void (*func)(struct ieee80211_node *, void *, int status);
void *arg;
};
#define NET80211_TAG_CALLBACK 0 /* xmit complete callback */
int ieee80211_add_callback(struct mbuf *m,
void (*func)(struct ieee80211_node *, void *, int), void *arg);
void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int);
2005-04-04 04:27:20 +00:00
void get_random_bytes(void *, size_t);
struct ieee80211com;
void ieee80211_sysctl_attach(struct ieee80211com *);
void ieee80211_sysctl_detach(struct ieee80211com *);
void ieee80211_load_module(const char *);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define IEEE80211_CRYPTO_MODULE(name, version) \
static int \
name##_modevent(module_t mod, int type, void *unused) \
{ \
switch (type) { \
case MOD_LOAD: \
ieee80211_crypto_register(&name); \
return 0; \
case MOD_UNLOAD: \
case MOD_QUIESCE: \
if (nrefs) { \
printf("wlan_##name: still in use (%u dynamic refs)\n",\
nrefs); \
return EBUSY; \
} \
if (type == MOD_UNLOAD) \
ieee80211_crypto_unregister(&name); \
return 0; \
} \
return EINVAL; \
} \
static moduledata_t name##_mod = { \
"wlan_" #name, \
name##_modevent, \
0 \
}; \
DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\
MODULE_VERSION(wlan_##name, version); \
MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1)
#endif /* _KERNEL */
/* XXX this stuff belongs elsewhere */
/*
* Message formats for messages from the net80211 layer to user
* applications via the routing socket. These messages are appended
* to an if_announcemsghdr structure.
*/
struct ieee80211_join_event {
uint8_t iev_addr[6];
};
struct ieee80211_leave_event {
uint8_t iev_addr[6];
};
struct ieee80211_replay_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
uint64_t iev_keyrsc; /* RSC from key */
uint64_t iev_rsc; /* RSC from frame */
};
struct ieee80211_michael_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
};
#define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */
#define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */
#define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */
#define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */
#define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */
#define RTM_IEEE80211_SCAN 105 /* scan complete, results available */
#define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */
#define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */
#define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */
/*
* Structure prepended to raw packets sent through the bpf
* interface when set to DLT_IEEE802_11_RADIO. This allows
* user applications to specify pretty much everything in
* an Atheros tx descriptor. XXX need to generalize.
*
* XXX cannot be more than 14 bytes as it is copied to a sockaddr's
* XXX sa_data area.
*/
struct ieee80211_bpf_params {
uint8_t ibp_vers; /* version */
#define IEEE80211_BPF_VERSION 0
uint8_t ibp_len; /* header length in bytes */
uint8_t ibp_flags;
#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */
#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */
#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */
#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */
#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */
#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */
#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */
uint8_t ibp_pri; /* WME/WMM AC+tx antenna */
uint8_t ibp_try0; /* series 1 try count */
uint8_t ibp_rate0; /* series 1 IEEE tx rate */
uint8_t ibp_power; /* tx power (device units) */
uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */
uint8_t ibp_try1; /* series 2 try count */
uint8_t ibp_rate1; /* series 2 IEEE tx rate */
uint8_t ibp_try2; /* series 3 try count */
uint8_t ibp_rate2; /* series 3 IEEE tx rate */
uint8_t ibp_try3; /* series 4 try count */
uint8_t ibp_rate3; /* series 4 IEEE tx rate */
};
#endif /* _NET80211_IEEE80211_FREEBSD_H_ */