d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c85b224faf
freebsd-nq/module/zfs/zpl_inode.c

384 lines
8.1 KiB
C
Raw Normal View History

Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2011, Lawrence Livermore National Security, LLC.
*/
#include <sys/zfs_vfsops.h>
#include <sys/zfs_vnops.h>
#include <sys/vfs.h>
#include <sys/zpl.h>
static struct dentry *
zpl_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
struct inode *ip;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_lookup(dir, dname(dentry), &ip, 0, cr, NULL, NULL);
ASSERT3S(error, <=, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
if (error) {
if (error == -ENOENT)
return d_splice_alias(NULL, dentry);
else
return ERR_PTR(error);
}
return d_splice_alias(ip, dentry);
}
static int
zpl_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
struct inode *ip;
vattr_t *vap;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mode = mode;
vap->va_mask = ATTR_MODE;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap->va_uid = crgetfsuid(cr);
vap->va_gid = crgetfsgid(cr);
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
vap->va_dentry = dentry;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_create(dir, (char *)dentry->d_name.name,
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap, 0, mode, &ip, cr, 0, NULL);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t rdev)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
struct inode *ip;
vattr_t *vap;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mode = mode;
vap->va_mask = ATTR_MODE;
vap->va_rdev = rdev;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap->va_uid = crgetfsuid(cr);
vap->va_gid = crgetfsgid(cr);
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
vap->va_dentry = dentry;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_create(dir, (char *)dentry->d_name.name,
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap, 0, mode, &ip, cr, 0, NULL);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (-error);
}
static int
zpl_unlink(struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_remove(dir, dname(dentry), cr);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vattr_t *vap;
struct inode *ip;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mode = S_IFDIR | mode;
vap->va_mask = ATTR_MODE;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap->va_uid = crgetfsuid(cr);
vap->va_gid = crgetfsgid(cr);
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
vap->va_dentry = dentry;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_mkdir(dir, dname(dentry), vap, &ip, cr, 0, NULL);
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_rmdir(struct inode * dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_rmdir(dir, dname(dentry), NULL, cr, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vattr_t *vap;
struct inode *ip;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
int error;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
ip = dentry->d_inode;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
error = -zfs_getattr(ip, vap, 0, cr);
if (error)
goto out;
stat->ino = ip->i_ino;
Set stat->st_dev and statfs->f_fsid Filesystems like ZFS must use what the kernel calls an anonymous super block. Basically, this is just a filesystem which is not backed by a single block device. Normally this block device's dev_t is stored in the super block. For anonymous super blocks a unique reserved dev_t is assigned as part of get_sb(). This sb->s_dev must then be set in the returned stat structures as stat->st_dev. This allows userspace utilities to easily detect the boundries of a specific filesystem. Tools such as 'du' depend on this for proper accounting. Additionally, under OpenSolaris the statfs->f_fsid is set to the device id. To preserve consistency with OpenSolaris we also set the fsid to the device id. Other Linux filesystem (ext) set the fsid to a unique value determined by the filesystems uuid. This value is unique but maintains no relationship to the device id. This may be desirable when exporting NFS filesystem because it minimizes to chance of a client observing the same fsid from two different servers. Closes #140
2011-03-08 00:06:22 +00:00
stat->dev = ip->i_sb->s_dev;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
stat->mode = vap->va_mode;
stat->nlink = vap->va_nlink;
stat->uid = vap->va_uid;
stat->gid = vap->va_gid;
stat->rdev = vap->va_rdev;
stat->size = vap->va_size;
stat->atime = vap->va_atime;
stat->mtime = vap->va_mtime;
stat->ctime = vap->va_ctime;
stat->blksize = vap->va_blksize;
stat->blocks = vap->va_nblocks;
out:
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
zpl_setattr(struct dentry *dentry, struct iattr *ia)
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vattr_t *vap;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
int error;
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
error = inode_change_ok(dentry->d_inode, ia);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
if (error)
return (error);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mask = ia->ia_valid & ATTR_IATTR_MASK;
vap->va_mode = ia->ia_mode;
vap->va_uid = ia->ia_uid;
vap->va_gid = ia->ia_gid;
vap->va_size = ia->ia_size;
vap->va_atime = ia->ia_atime;
vap->va_mtime = ia->ia_mtime;
vap->va_ctime = ia->ia_ctime;
error = -zfs_setattr(dentry->d_inode, vap, 0, cr);
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
return (error);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
}
static int
zpl_rename(struct inode *sdip, struct dentry *sdentry,
struct inode *tdip, struct dentry *tdentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_rename(sdip, dname(sdentry), tdip, dname(tdentry), cr, 0);
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static int
zpl_symlink(struct inode *dir, struct dentry *dentry, const char *name)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vattr_t *vap;
struct inode *ip;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
vap = kmem_zalloc(sizeof(vattr_t), KM_SLEEP);
vap->va_mode = S_IFLNK | S_IRWXUGO;
vap->va_mask = ATTR_MODE;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
vap->va_uid = crgetfsuid(cr);
vap->va_gid = crgetfsgid(cr);
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
vap->va_dentry = dentry;
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
error = -zfs_symlink(dir, dname(dentry), vap, (char *)name, &ip, cr, 0);
kmem_free(vap, sizeof(vattr_t));
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
static void *
zpl_follow_link(struct dentry *dentry, struct nameidata *nd)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-16 23:54:55 +00:00
struct inode *ip = dentry->d_inode;
struct iovec iov;
uio_t uio;
char *link;
int error;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-16 23:54:55 +00:00
iov.iov_len = MAXPATHLEN;
iov.iov_base = link = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_resid = (MAXPATHLEN - 1);
uio.uio_segflg = UIO_SYSSPACE;
Use -zfs_readlink() error The zfs_readlink() function returns a Solaris positive error value and that needs to be converted to a Linux negative error value. While in this case nothing would actually go wrong, it's still incorrect and should be fixed if for no other reason than clarity.
2011-02-17 17:48:06 +00:00
error = -zfs_readlink(ip, &uio, cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-16 23:54:55 +00:00
if (error) {
kmem_free(link, MAXPATHLEN);
nd_set_link(nd, ERR_PTR(error));
} else {
nd_set_link(nd, link);
}
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-16 23:54:55 +00:00
return (NULL);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
}
static void
zpl_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
char *link;
link = nd_get_link(nd);
if (!IS_ERR(link))
Fix readlink(2) This patch addresses three issues related to symlinks. 1) Revert the zfs_follow_link() function to a modified version of the original zfs_readlink(). The only changes from the original OpenSolaris version relate to using Linux types. For the moment this means no vnode's and no zfsvfs_t. The caller zpl_follow_link() was also updated accordingly. This change was reverted because it was slightly gratuitious. 2) Update zpl_follow_link() to use local variables for the link buffer. I'd forgotten that iov.iov_base is updated by uiomove() so after the call to zfs_readlink() it can not longer be used. We need our own private copy of the link pointer. 3) Allocate MAXPATHLEN instead of MAXPATHLEN+1. By default MAXPATHLEN is 4096 bytes which is a full page, adding one to it pushes it slightly over a page. That means you'll likely end up allocating 2 pages which is wasteful of memory and possibly slightly slower.
2011-02-16 23:54:55 +00:00
kmem_free(link, MAXPATHLEN);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
}
static int
zpl_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
cred_t *cr = CRED();
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
struct inode *ip = old_dentry->d_inode;
int error;
if (ip->i_nlink >= ZFS_LINK_MAX)
return -EMLINK;
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crhold(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ip->i_ctime = CURRENT_TIME_SEC;
igrab(ip); /* Use ihold() if available */
error = -zfs_link(dir, ip, dname(dentry), cr);
if (error) {
iput(ip);
goto out;
}
d_instantiate(dentry, ip);
out:
Linux 2.6.29 compat, credentials As of Linux 2.6.29 a clean credential API was added to the Linux kernel. Previously the credential was embedded in the task_struct. Because the SPL already has considerable support for handling this API change the ZPL code has been updated to use the Solaris credential API.
2011-03-22 18:13:41 +00:00
crfree(cr);
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
ASSERT3S(error, <=, 0);
return (error);
}
const struct inode_operations zpl_inode_operations = {
.create = zpl_create,
.link = zpl_link,
.unlink = zpl_unlink,
.symlink = zpl_symlink,
.mkdir = zpl_mkdir,
.rmdir = zpl_rmdir,
.mknod = zpl_mknod,
.rename = zpl_rename,
.setattr = zpl_setattr,
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
};
const struct inode_operations zpl_dir_inode_operations = {
.create = zpl_create,
.lookup = zpl_lookup,
.link = zpl_link,
.unlink = zpl_unlink,
.symlink = zpl_symlink,
.mkdir = zpl_mkdir,
.rmdir = zpl_rmdir,
.mknod = zpl_mknod,
.rename = zpl_rename,
.setattr = zpl_setattr,
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 17:55:53 +00:00
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
};
const struct inode_operations zpl_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = zpl_follow_link,
.put_link = zpl_put_link,
};
const struct inode_operations zpl_special_inode_operations = {
Add get/setattr, get/setxattr hooks While the attr/xattr hooks were already in place for regular files this hooks can also apply to directories and special files. While they aren't typically used in this way, it should be supported. This patch registers these additional callbacks for both directory and special inode types.
2011-02-16 17:55:53 +00:00
.setattr = zpl_setattr,
.getattr = zpl_getattr,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.removexattr = generic_removexattr,
.listxattr = zpl_xattr_list,
Add Hooks for Linux Inode Operations The Linux specific inode operations have all been located in the file zpl_inode.c. These functions primarily rely on the reworked zfs_* functions to do their job. They are also responsible for converting the possible Solaris style error codes to negative Linux errors.
2011-01-26 20:08:24 +00:00
};
Reference in New Issue Copy Permalink