freebsd-nq/share/man/man4/ncr.4

.\"
.\" Copyright (c) 1994 James A. Jegers
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd August 19, 2004
.Dt NCR 4
.Os
.Sh NAME
.Nm ncr
.Nd NCR 53C8xx SCSI driver
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device pci"
.Cd "device scbus"
.Cd "device ncr"
.Ed
.Sh HARDWARE
The
.Nm
driver provides support for the following NCR/Symbios SCSI controller
chips:
.Pp
.Bl -bullet -compact
.It
.Tn 53C810
.It
.Tn 53C810A
.It
.Tn 53C815
.It
.Tn 53C820
.It
.Tn 53C825A
.It
.Tn 53C860
.It
.Tn 53C875
.It
.Tn 53C875J
.It
.Tn 53C885
.It
.Tn 53C895
.It
.Tn 53C895A
.It
.Tn 53C896
.It
.Tn 53C1510D
.El
.Sh SEE ALSO
.Xr cd 4 ,
.Xr ch 4 ,
.Xr da 4 ,
.Xr intro 4 ,
.Xr sa 4 ,
.Xr scsi 4 ,
.Xr sym 4
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.\"`
			`.\" Copyright (c) 1994 James A. Jegers`
			`.\" All rights reserved.`
			`.\"`
			`.\" Redistribution and use in source and binary forms, with or without`
			`.\" modification, are permitted provided that the following conditions`
			`.\" are met:`
			`.\" 1. Redistributions of source code must retain the above copyright`
			`.\" notice, this list of conditions and the following disclaimer.`
			`.\" 2. The name of the author may not be used to endorse or promote products`
			`.\" derived from this software without specific prior written permission`
Removed whitespace at end-of-line; no content changes. I simply did cd src/share; find man[1-9] -type f\|xargs perl -pi -e 's/[ \t]+$//' BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block... Reviewed by: Silence from cvs diff -b MFC after: 7 days 2001-07-14 19:41:16 +00:00			`.\"`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
			`.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES`
			`.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.`
			`.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,`
			`.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT`
			`.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,`
			`.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY`
			`.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT`
			`.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF`
			`.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`
			`.\"`
$Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00			`.\" $FreeBSD$`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.\"`
Add a HARDWARE section which lists supported devices. MFC after: 3 days 2004-08-19 21:24:45 +00:00			`.Dd August 19, 2004`
* remove i386 specific mark * some style and syntax fixes * some duplicated $FreeBSD$ tags removed 1999-11-15 23:14:32 +00:00			`.Dt NCR 4`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.Os`
			`.Sh NAME`
			`.Nm ncr`
Added names of additional controller chips supported by the NCR driver to the manual page. PR: 7967 Submitted by: Stefan Eggers <seggers@semyam.dinoco.de> 1998-09-18 04:36:48 +00:00			`.Nd NCR 53C8xx SCSI driver`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.Sh SYNOPSIS`
o Convert to our new SYNOPSIS layout o Add "device scbus/pci/etc" where needed for consistency MFC after: 3 days 2006-06-18 09:53:00 +00:00			`To compile this driver into the kernel,`
			`place the following lines in your`
			`kernel configuration file:`
			`.Bd -ragged -offset indent`
			`.Cd "device pci"`
			`.Cd "device scbus"`
First round of config related changes to the manpages. device blah0 -> device blah for PCI devices and busses. 2000-01-23 15:04:20 +00:00			`.Cd "device ncr"`
o Convert to our new SYNOPSIS layout o Add "device scbus/pci/etc" where needed for consistency MFC after: 3 days 2006-06-18 09:53:00 +00:00			`.Ed`
Add a HARDWARE section which lists supported devices. MFC after: 3 days 2004-08-19 21:24:45 +00:00			`.Sh HARDWARE`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`The`
Added names of additional controller chips supported by the NCR driver to the manual page. PR: 7967 Submitted by: Stefan Eggers <seggers@semyam.dinoco.de> 1998-09-18 04:36:48 +00:00			`.Nm`
- Sync the list of supported device with the hardware notes and the driver source code. - Use a mdoc list for the list of supported devices. MFC after: 1 week 2003-11-09 22:21:21 +00:00			`driver provides support for the following NCR/Symbios SCSI controller`
			`chips:`
			`.Pp`
			`.Bl -bullet -compact`
			`.It`
			`.Tn 53C810`
			`.It`
			`.Tn 53C810A`
			`.It`
			`.Tn 53C815`
			`.It`
			`.Tn 53C820`
			`.It`
			`.Tn 53C825A`
			`.It`
			`.Tn 53C860`
			`.It`
			`.Tn 53C875`
			`.It`
			`.Tn 53C875J`
			`.It`
			`.Tn 53C885`
			`.It`
			`.Tn 53C895`
			`.It`
			`.Tn 53C895A`
			`.It`
			`.Tn 53C896`
			`.It`
			`.Tn 53C1510D`
			`.El`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.Sh SEE ALSO`
Sort cross references. 1996-12-26 16:16:37 +00:00			`.Xr cd 4 ,`
Removed whitespace at end-of-line; no content changes. I simply did cd src/share; find man[1-9] -type f\|xargs perl -pi -e 's/[ \t]+$//' BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block... Reviewed by: Silence from cvs diff -b MFC after: 7 days 2001-07-14 19:41:16 +00:00			`.Xr ch 4 ,`
Correct `sd', `st' -> `da', `sa'; add xref to scsi(4); remove xref to nca(4). PR: docs/11493 Submitted by: "Steven G. Kargl" <kargl@troutmask.apl.washington.edu> 1999-05-05 04:01:40 +00:00			`.Xr da 4 ,`
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers). Obtained from: NetBSD 1996-07-11 00:30:51 +00:00			`.Xr intro 4 ,`
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net> 1999-08-15 10:48:36 +00:00			`.Xr sa 4 ,`
Add xref to sym(4) PR: 26881 2001-04-29 03:48:35 +00:00			`.Xr scsi 4 ,`
			`.Xr sym 4`