d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cf87044e5e
freebsd-nq/sys/dev/pci/pcivar.h

309 lines
10 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#ifndef _PCIVAR_H_
#define _PCIVAR_H_
#include <sys/queue.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* some PCI bus constants */
#define PCI_BUSMAX 255 /* highest supported bus number */
#define PCI_SLOTMAX 31 /* highest supported slot number */
#define PCI_FUNCMAX 7 /* highest supported function number */
#define PCI_REGMAX 255 /* highest supported config register addr. */
#define PCI_MAXMAPS_0 6 /* max. no. of memory/port maps */
#define PCI_MAXMAPS_1 2 /* max. no. of maps for PCI to PCI bridge */
#define PCI_MAXMAPS_2 1 /* max. no. of maps for CardBus bridge */
/* pci_addr_t covers this system's PCI bus address space: 32 or 64 bit */
#ifdef PCI_A64
typedef u_int64_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#else
typedef u_int32_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#endif
/* config header information common to all header types */
typedef struct pcicfg {
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
struct device *dev; /* device which owns this */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int16_t subvendor; /* card vendor ID */
u_int16_t subdevice; /* card device ID, assigned by card vendor */
u_int16_t vendor; /* chip vendor ID */
u_int16_t device; /* chip device ID, assigned by chip vendor */
u_int16_t cmdreg; /* disable/enable chip and PCI options */
u_int16_t statreg; /* supported PCI features and error state */
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
u_int8_t baseclass; /* chip PCI class */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int8_t subclass; /* chip PCI subclass */
u_int8_t progif; /* chip PCI programming interface */
u_int8_t revid; /* chip revision ID */
u_int8_t hdrtype; /* chip config header type */
u_int8_t cachelnsz; /* cache line size in 4byte units */
u_int8_t intpin; /* PCI interrupt pin */
u_int8_t intline; /* interrupt line (IRQ for PC arch) */
u_int8_t mingnt; /* min. useful bus grant time in 250ns units */
u_int8_t maxlat; /* max. tolerated bus grant latency in 250ns */
u_int8_t lattimer; /* latency timer in units of 30ns bus cycles */
u_int8_t mfdev; /* multi-function device (from hdrtype reg) */
u_int8_t nummaps; /* actual number of PCI maps used */
u_int8_t bus; /* config space bus address */
u_int8_t slot; /* config space slot address */
u_int8_t func; /* config space function number */
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
u_int16_t pp_cap; /* PCI power management capabilities */
u_int8_t pp_status; /* config space address of PCI power status reg */
u_int8_t pp_pmcsr; /* config space address of PMCSR reg */
u_int8_t pp_data; /* config space address of PCI power data reg */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} pcicfgregs;
/* additional type 1 device config header information (PCI to PCI bridge) */
#ifdef PCI_A64
#define PCI_PPBMEMBASE(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
#else
#define PCI_PPBMEMBASE(h,l) (((l)<<16) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) (((l)<<16) | 0xfffff)
#endif /* PCI_A64 */
#define PCI_PPBIOBASE(h,l) ((((h)<<16) + ((l)<<8)) & ~0xfff)
#define PCI_PPBIOLIMIT(h,l) ((((h)<<16) + ((l)<<8)) | 0xfff)
typedef struct {
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
u_int32_t membase; /* base address of memory window */
u_int32_t memlimit; /* topmost address of memory window */
u_int32_t iobase; /* base address of port window */
u_int32_t iolimit; /* topmost address of port window */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih1cfgregs;
/* additional type 2 device config header information (CardBus bridge) */
typedef struct {
u_int32_t membase0; /* base address of memory window */
u_int32_t memlimit0; /* topmost address of memory window */
u_int32_t membase1; /* base address of memory window */
u_int32_t memlimit1; /* topmost address of memory window */
u_int32_t iobase0; /* base address of port window */
u_int32_t iolimit0; /* topmost address of port window */
u_int32_t iobase1; /* base address of port window */
u_int32_t iolimit1; /* topmost address of port window */
u_int32_t pccardif; /* PC Card 16bit IF legacy more base addr. */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih2cfgregs;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
extern u_int32_t pci_numdevs;
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
/* Only if the prerequisites are present */
#if defined(_SYS_BUS_H_) && defined(_SYS_PCIIO_H_)
struct pci_devinfo {
STAILQ_ENTRY(pci_devinfo) pci_links;
struct resource_list resources;
pcicfgregs cfg;
struct pci_conf conf;
};
#endif
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
#ifdef __alpha__
vm_offset_t pci_cvt_to_dense (vm_offset_t);
vm_offset_t pci_cvt_to_bwx (vm_offset_t);
#endif /* __alpha__ */
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#ifdef _SYS_BUS_H_
#include "pci_if.h"
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
/*
* Define pci-specific resource flags for accessing memory via dense
* or bwx memory spaces. These flags are ignored on i386.
*/
#define PCI_RF_DENSE 0x10000
#define PCI_RF_BWX 0x20000
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
enum pci_device_ivars {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
PCI_IVAR_SUBVENDOR,
PCI_IVAR_SUBDEVICE,
PCI_IVAR_VENDOR,
PCI_IVAR_DEVICE,
PCI_IVAR_DEVID,
PCI_IVAR_CLASS,
PCI_IVAR_SUBCLASS,
PCI_IVAR_PROGIF,
PCI_IVAR_REVID,
PCI_IVAR_INTPIN,
PCI_IVAR_IRQ,
PCI_IVAR_BUS,
PCI_IVAR_SLOT,
PCI_IVAR_FUNCTION,
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
};
/*
* Simplified accessors for pci devices
*/
#define PCI_ACCESSOR(A, B, T) \
\
static __inline T pci_get_ ## A(device_t dev) \
{ \
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
uintptr_t v; \
BUS_READ_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, &v); \
return (T) v; \
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
} \
\
static __inline void pci_set_ ## A(device_t dev, T t) \
{ \
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
uintptr_t v = (uintptr_t) t; \
BUS_WRITE_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, v); \
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
PCI_ACCESSOR(subvendor, SUBVENDOR, u_int16_t)
PCI_ACCESSOR(subdevice, SUBDEVICE, u_int16_t)
PCI_ACCESSOR(vendor, VENDOR, u_int16_t)
PCI_ACCESSOR(device, DEVICE, u_int16_t)
PCI_ACCESSOR(devid, DEVID, u_int32_t)
PCI_ACCESSOR(class, CLASS, u_int8_t)
PCI_ACCESSOR(subclass, SUBCLASS, u_int8_t)
PCI_ACCESSOR(progif, PROGIF, u_int8_t)
PCI_ACCESSOR(revid, REVID, u_int8_t)
PCI_ACCESSOR(intpin, INTPIN, u_int8_t)
PCI_ACCESSOR(irq, IRQ, u_int8_t)
PCI_ACCESSOR(bus, BUS, u_int8_t)
PCI_ACCESSOR(slot, SLOT, u_int8_t)
PCI_ACCESSOR(function, FUNCTION, u_int8_t)
Get out the roto-rooter and clean up the abuse of nexus ivars by the i386/isa/pcibus.c. This gets -current running again on multiple host->pci machines after the most recent nexus commits. I had discussed this with Mike Smith, but ended up doing it slightly differently to what we discussed as it turned out cleaner this way. Mike was suggesting creating a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(), but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform property, not a quirk of a given implementation. This does use the ivar methods but does so properly. It also now prints the physical pci bus that a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
#undef PCI_ACCESSOR
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* Operations on configuration space.
*/
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
static __inline u_int32_t
pci_read_config(device_t dev, int reg, int width)
{
return PCI_READ_CONFIG(device_get_parent(dev), dev, reg, width);
}
static __inline void
pci_write_config(device_t dev, int reg, u_int32_t val, int width)
{
PCI_WRITE_CONFIG(device_get_parent(dev), dev, reg, val, width);
}
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
/*
* Ivars for pci bridges.
*/
/*typedef enum pci_device_ivars pcib_device_ivars;*/
enum pcib_device_ivars {
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
PCIB_IVAR_BUS
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
};
#define PCIB_ACCESSOR(A, B, T) \
\
static __inline T pcib_get_ ## A(device_t dev) \
{ \
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
uintptr_t v; \
BUS_READ_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, &v); \
return (T) v; \
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
} \
\
static __inline void pcib_set_ ## A(device_t dev, T t) \
{ \
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
uintptr_t v = (uintptr_t) t; \
BUS_WRITE_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, v); \
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
}
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
PCIB_ACCESSOR(bus, BUS, u_int32_t)
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Get out the roto-rooter and clean up the abuse of nexus ivars by the i386/isa/pcibus.c. This gets -current running again on multiple host->pci machines after the most recent nexus commits. I had discussed this with Mike Smith, but ended up doing it slightly differently to what we discussed as it turned out cleaner this way. Mike was suggesting creating a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(), but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform property, not a quirk of a given implementation. This does use the ivar methods but does so properly. It also now prints the physical pci bus that a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
#undef PCIB_ACCESSOR
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* Convenience functions.
*
* These should be used in preference to manually manipulating
* configuration space.
*/
extern void pci_enable_busmaster(device_t dev);
extern void pci_disable_busmaster(device_t dev);
extern void pci_enable_io(device_t dev, int space);
extern void pci_disable_io(device_t dev, int space);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* PCI power states are as defined by ACPI:
*
* D0 State in which device is on and running. It is receiving full
* power from the system and delivering full functionality to the user.
* D1 Class-specific low-power state in which device context may or may not
* be lost. Buses in D1 cannot do anything to the bus that would force
* devices on that bus to loose context.
* D2 Class-specific low-power state in which device context may or may
* not be lost. Attains greater power savings than D1. Buses in D2
* can cause devices on that bus to loose some context. Devices in D2
* must be prepared for the bus to be in D2 or higher.
* D3 State in which the device is off and not running. Device context is
* lost. Power can be removed from the device.
*/
#define PCI_POWERSTATE_D0 0
#define PCI_POWERSTATE_D1 1
#define PCI_POWERSTATE_D2 2
#define PCI_POWERSTATE_D3 3
#define PCI_POWERSTATE_UNKNOWN -1
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
extern int pci_set_powerstate(device_t dev, int state);
extern int pci_get_powerstate(device_t dev);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
#endif /* _SYS_BUS_H_ */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Files moved here from sys/i386/pci, since they are meant to be architecture independent.
1995-02-01 22:56:55 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* cdev switch for control device, initialised in generic PCI code
*/
extern struct cdevsw pcicdev;
On the alpha, ports may be allocated above 64k. Change the port address argument to pci_map_port to pci_port_t* which is defined as u_int on the alpha, u_short on i386. This is a stopgap with a hopefully limited lifetime. Discussed with: Stefan Esser <se@freebsd.org>
1998-07-22 08:39:08 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* List of all PCI devices, generation count for the list.
*/
STAILQ_HEAD(devlist, pci_devinfo) pci_devq;
u_int32_t pci_generation;
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#endif /* _PCIVAR_H_ */
Reference in New Issue Copy Permalink