d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cfab163573
freebsd-nq/sys/dev/raidframe/rf_freebsdkintf.c

3187 lines
84 KiB
C
Raw Normal View History

After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
/*-
* Copyright (c) 2002 Scott Long <scottl@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/* $NetBSD: rf_netbsdkintf.c,v 1.105 2001/04/05 02:48:51 oster Exp $ */
/*-
* Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Greg Oster; Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: cd.c 1.6 90/11/28$
*
* @(#)cd.c 8.2 (Berkeley) 11/16/93
*/
/*
* Copyright (c) 1995 Carnegie-Mellon University.
* All rights reserved.
*
* Authors: Mark Holland, Jim Zelenka
*
* Permission to use, copy, modify and distribute this software and
* its documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/***********************************************************
*
* rf_kintf.c -- the kernel interface routines for RAIDframe
*
***********************************************************/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/errno.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <sys/ioccom.h>
#include <sys/filio.h>
When compiling the kernel do not implicitly include filedesc.h from proc.h, this was causing filedesc work to be very painful. In order to make this work split out sigio definitions to thier own header (sigio.h) which is included from proc.h for the time being.
2003-01-01 01:56:19 +00:00
#include <sys/filedesc.h>
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
#include <sys/fcntl.h>
#include <sys/systm.h>
#include <sys/namei.h>
#include <sys/vnode.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/conf.h>
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
#include <sys/disk.h>
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
#include <sys/lock.h>
#include <sys/reboot.h>
#include <sys/module.h>
#include <vm/uma.h>
Use bioq_flush() to drain a bio queue with a specific error code. Retain the mistake of not updating the devstat API for now. Spell bioq_disksort() consistently with the remaining bioq_*(). #include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
#include <geom/geom_disk.h>
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
#include "opt_raid.h"
#include <dev/raidframe/rf_raid.h>
#include <dev/raidframe/rf_raidframe.h>
#include <dev/raidframe/rf_copyback.h>
#include <dev/raidframe/rf_dag.h>
#include <dev/raidframe/rf_dagflags.h>
#include <dev/raidframe/rf_desc.h>
#include <dev/raidframe/rf_diskqueue.h>
#include <dev/raidframe/rf_acctrace.h>
#include <dev/raidframe/rf_etimer.h>
#include <dev/raidframe/rf_general.h>
#include <dev/raidframe/rf_debugMem.h>
#include <dev/raidframe/rf_kintf.h>
#include <dev/raidframe/rf_options.h>
#include <dev/raidframe/rf_driver.h>
#include <dev/raidframe/rf_parityscan.h>
#include <dev/raidframe/rf_debugprint.h>
#include <dev/raidframe/rf_threadstuff.h>
#include <dev/raidframe/rf_configure.h>
RF_DECLARE_STATIC_MUTEX(rf_sparet_wait_mutex)
static RF_SparetWait_t *rf_sparet_wait_queue; /* requests to install a
* spare table */
static RF_SparetWait_t *rf_sparet_resp_queue; /* responses from
* installation process */
/* prototypes */
static void KernelWakeupFunc(struct bio *);
static void InitBP(struct bio *, struct vnode *, unsigned rw_flag,
dev_t dev, RF_SectorNum_t startSect,
RF_SectorCount_t numSect, caddr_t buf,
void (*cbFunc) (struct bio *), void *cbArg,
int logBytesPerSector, struct proc * b_proc);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
static struct raid_softc *raidinit(RF_Raid_t *);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
static void rf_search_label(dev_t, struct disklabel *,
RF_AutoConfig_t **) __unused;
static int raid_modevent(module_t, int, void*);
void raidattach(void);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
disk_open_t raidopen;
disk_close_t raidclose;
disk_ioctl_t raidioctl;
disk_strategy_t raidstrategy;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
d_open_t raidctlopen;
d_close_t raidctlclose;
d_ioctl_t raidctlioctl;
static struct cdevsw raidctl_cdevsw = {
Gigacommit to improve device-driver source compatibility between branches: Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values. This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386. Approved by: re(scottl)
2003-03-03 12:15:54 +00:00
.d_open = raidctlopen,
.d_close = raidctlclose,
.d_ioctl = raidctlioctl,
.d_name = "raidctl",
.d_maj = 201,
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
};
/*
* Pilfered from ccd.c
*/
struct raidbuf {
struct bio rf_buf; /* new I/O buf. MUST BE FIRST!!! */
struct bio *rf_obp; /* ptr. to original I/O buf */
int rf_flags; /* misc. flags */
RF_DiskQueueData_t *req;/* the request that this was part of.. */
};
#define RAIDGETBUF(sc) uma_zalloc((sc)->sc_cbufpool, M_NOWAIT)
#define RAIDPUTBUF(sc, cbp) uma_zfree((sc)->sc_cbufpool, cbp)
#define RF_MAX_ARRAYS 32
/* Raid control device */
struct raidctl_softc {
dev_t sc_dev; /* Device node */
int sc_flags; /* flags */
int sc_numraid; /* Number of configured raid devices */
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
struct raid_softc *sc_raiddevs[RF_MAX_ARRAYS];
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
};
struct raid_softc {
dev_t sc_parent_dev;
int sc_flags; /* flags */
int sc_busycount; /* How many times are we opened? */
size_t sc_size; /* size of the raid device */
dev_t sc_parent; /* Parent device */
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
struct disk sc_disk; /* generic disk device info */
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
uma_zone_t sc_cbufpool; /* component buffer pool */
RF_Raid_t *raidPtr; /* Raid information struct */
struct bio_queue_head bio_queue; /* used for the device queue */
};
/* sc_flags */
#define RAIDF_OPEN 0x01 /* unit has been initialized */
#define RAIDF_WLABEL 0x02 /* label area is writable */
#define RAIDF_LABELLING 0x04 /* unit is currently being labelled */
#define RAIDF_WANTED 0x40 /* someone is waiting to obtain a lock */
#define RAIDF_LOCKED 0x80 /* unit is locked */
/*
* Allow RAIDOUTSTANDING number of simultaneous IO's to this RAID device.
* Be aware that large numbers can allow the driver to consume a lot of
* kernel memory, especially on writes, and in degraded mode reads.
*
* For example: with a stripe width of 64 blocks (32k) and 5 disks,
* a single 64K write will typically require 64K for the old data,
* 64K for the old parity, and 64K for the new parity, for a total
* of 192K (if the parity buffer is not re-used immediately).
* Even it if is used immedately, that's still 128K, which when multiplied
* by say 10 requests, is 1280K, *on top* of the 640K of incoming data.
*
* Now in degraded mode, for example, a 64K read on the above setup may
* require data reconstruction, which will require *all* of the 4 remaining
* disks to participate -- 4 * 32K/disk == 128K again.
*/
#ifndef RAIDOUTSTANDING
#define RAIDOUTSTANDING 10
#endif
static void raidgetdefaultlabel(RF_Raid_t *, struct raid_softc *, struct disk*);
static int raidlock(struct raid_softc *);
static void raidunlock(struct raid_softc *);
static void rf_markalldirty(RF_Raid_t *);
static dev_t raidctl_dev;
void rf_ReconThread(struct rf_recon_req *);
/* XXX what I want is: */
/*void rf_ReconThread(RF_Raid_t *raidPtr); */
void rf_RewriteParityThread(RF_Raid_t *raidPtr);
void rf_CopybackThread(RF_Raid_t *raidPtr);
void rf_ReconstructInPlaceThread(struct rf_recon_req *);
void rf_buildroothack(void *, struct raidctl_softc *);
RF_AutoConfig_t *rf_find_raid_components(void);
RF_ConfigSet_t *rf_create_auto_sets(RF_AutoConfig_t *);
static int rf_does_it_fit(RF_ConfigSet_t *,RF_AutoConfig_t *);
static int rf_reasonable_label(RF_ComponentLabel_t *);
void rf_create_configuration(RF_AutoConfig_t *,RF_Config_t *, RF_Raid_t *);
int rf_set_autoconfig(RF_Raid_t *, int);
int rf_set_rootpartition(RF_Raid_t *, int);
void rf_release_all_vps(RF_ConfigSet_t *);
void rf_cleanup_config_set(RF_ConfigSet_t *);
int rf_have_enough_components(RF_ConfigSet_t *);
int rf_auto_config_set(RF_ConfigSet_t *, int *, struct raidctl_softc *);
static int raidgetunit(struct raidctl_softc *, int);
static int raidshutdown(void);
void
raidattach(void)
{
struct raidctl_softc *parent_sc = NULL;
RF_AutoConfig_t *ac_list; /* autoconfig list */
RF_ConfigSet_t *config_sets;
int autoconfig = 0;
/* This is where all the initialization stuff gets done. */
if(rf_mutex_init(&rf_sparet_wait_mutex, __FUNCTION__)) {
rf_printf(0, "RAIDframe: failed to initialize mutexes\n");
return;
}
rf_sparet_wait_queue = rf_sparet_resp_queue = NULL;
if (rf_BootRaidframe() != 0) {
rf_printf(0, "Serious error booting RAIDframe!!\n");
return;
}
rf_printf(0, "Kernelized RAIDframe activated\n");
MALLOC(parent_sc, struct raidctl_softc *, sizeof(*parent_sc),
M_RAIDFRAME, M_NOWAIT|M_ZERO);
if (parent_sc == NULL) {
RF_PANIC();
return;
}
Use UID_ and GID_ constants for uid and gid arguments to make_dev() for the raidctl device. Select a more conservative default for the permissions for /dev/raidctl since the operations are performed using ioctl() not read() and write(). Submitted by: kris Reviewed by: scottl
2002-12-31 06:13:47 +00:00
parent_sc->sc_dev= make_dev(&raidctl_cdevsw, 0, UID_ROOT, GID_WHEEL,
0600, "raidctl");
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
parent_sc->sc_dev->si_drv1 = parent_sc;
raidctl_dev = parent_sc->sc_dev;
#if RAID_AUTOCONFIG
autoconfig = 1;
#endif
if (autoconfig) {
/* 1. locate all RAID components on the system */
rf_printf(0, "Searching for raid components...\n");
ac_list = rf_find_raid_components();
if (ac_list == NULL)
return;
/* 2. sort them into their respective sets */
config_sets = rf_create_auto_sets(ac_list);
/* 3. evaluate each set and configure the valid ones
This gets done in rf_buildroothack() */
/* schedule the creation of the thread to do the
"/ on RAID" stuff */
rf_buildroothack(config_sets, parent_sc);
#if 0
kthread_create(rf_buildroothack,config_sets);
#endif /* RAID_AUTOCONFIG */
}
}
void
rf_buildroothack(arg, parent_sc)
void *arg;
struct raidctl_softc *parent_sc;
{
RF_ConfigSet_t *config_sets = arg;
RF_ConfigSet_t *cset;
RF_ConfigSet_t *next_cset;
int retcode;
int raidID;
int rootID;
int num_root;
rootID = 0;
num_root = 0;
cset = config_sets;
while(cset != NULL ) {
next_cset = cset->next;
if (rf_have_enough_components(cset) &&
cset->ac->clabel->autoconfigure==1) {
retcode = rf_auto_config_set(cset, &raidID, parent_sc);
if (!retcode) {
if (cset->rootable) {
rootID = raidID;
num_root++;
}
} else {
/* The autoconfig didn't work :( */
rf_printf(1, "Autoconfig failed with code %d"
"for raid%d\n", retcode, raidID);
rf_release_all_vps(cset);
}
} else {
/* we're not autoconfiguring this set...
release the associated resources */
rf_release_all_vps(cset);
}
/* cleanup */
rf_cleanup_config_set(cset);
cset = next_cset;
}
if (boothowto & RB_ASKNAME) {
/* We don't auto-config... */
} else {
/* They didn't ask, and we found something bootable... */
#if 0
if (num_root == 1) {
booted_device = &raidrootdev[rootID];
} else if (num_root > 1) {
/* we can't guess.. require the user to answer... */
boothowto |= RB_ASKNAME;
}
#endif
}
}
int
raidctlopen(dev_t dev, int flags, int fmt, struct thread *td)
{
struct raidctl_softc *parent_sc;
parent_sc = dev->si_drv1;
if ((parent_sc->sc_flags & RAIDF_OPEN) != 0)
return (EBUSY);
parent_sc->sc_flags |= RAIDF_OPEN;
return (0);
}
int
raidctlclose(dev_t dev, int flags, int fmt, struct thread *td)
{
struct raidctl_softc *parent_sc;
parent_sc = dev->si_drv1;
parent_sc->sc_flags &= ~RAIDF_OPEN;
return (0);
}
int
raidctlioctl(dev_t dev, u_long cmd, caddr_t data, int flags, struct thread *td)
{
struct raidctl_softc *parent_sc;
struct raid_softc *sc;
RF_Config_t *u_cfg, *k_cfg;
RF_Raid_t *raidPtr;
u_char *specific_buf;
u_int unit;
int retcode = 0;
parent_sc = dev->si_drv1;
switch (cmd) {
/* configure the system */
case RAIDFRAME_CONFIGURE:
/* copy-in the configuration information */
/* data points to a pointer to the configuration structure */
u_cfg = *((RF_Config_t **) data);
RF_Malloc(k_cfg, sizeof(RF_Config_t), (RF_Config_t *));
if (k_cfg == NULL) {
return (ENOMEM);
}
retcode = copyin((caddr_t) u_cfg, (caddr_t) k_cfg,
sizeof(RF_Config_t));
if (retcode) {
RF_Free(k_cfg, sizeof(RF_Config_t));
rf_printf(2, "raidctlioctl: retcode=%d copyin.1\n",
retcode);
return (retcode);
}
/* allocate a buffer for the layout-specific data, and copy it
* in */
if (k_cfg->layoutSpecificSize) {
if (k_cfg->layoutSpecificSize > 10000) {
/* sanity check */
RF_Free(k_cfg, sizeof(RF_Config_t));
return (EINVAL);
}
RF_Malloc(specific_buf, k_cfg->layoutSpecificSize,
(u_char *));
if (specific_buf == NULL) {
RF_Free(k_cfg, sizeof(RF_Config_t));
return (ENOMEM);
}
retcode = copyin(k_cfg->layoutSpecific,
(caddr_t) specific_buf,
k_cfg->layoutSpecificSize);
if (retcode) {
RF_Free(k_cfg, sizeof(RF_Config_t));
RF_Free(specific_buf,
k_cfg->layoutSpecificSize);
rf_printf(2, "raidctlioctl: retcode=%d "
"copyin.2\n", retcode);
return (retcode);
}
} else
specific_buf = NULL;
k_cfg->layoutSpecific = specific_buf;
/* should do some kind of sanity check on the configuration.
* Store the sum of all the bytes in the last byte? */
/* configure the system */
RF_Malloc(raidPtr, sizeof(*raidPtr), (RF_Raid_t *));
if (raidPtr == NULL) {
rf_printf(0, "No memory for raid device\n");
RF_Free(k_cfg, sizeof(RF_Config_t));
retcode = ENOMEM;
}
bzero((char *) raidPtr, sizeof(RF_Raid_t));
/* Request a unit number for this soon-to-be device. */
unit = raidgetunit(parent_sc, 0);
if (unit == -1) {
rf_printf(0, "Cannot allocate raid unit\n");
RF_Free(raidPtr, sizeof(*raidPtr));
goto out;
}
raidPtr->raidid = unit;
if ((retcode = rf_Configure(raidPtr, k_cfg, NULL)) == 0) {
/* allow this many simultaneous IO's to
this RAID device */
raidPtr->openings = RAIDOUTSTANDING;
parent_sc->sc_raiddevs[unit] = raidinit(raidPtr);
if (parent_sc->sc_raiddevs[unit] == NULL) {
rf_printf(0, "Could not create raid device\n");
RF_Free(raidPtr, sizeof(*raidPtr));
goto out;
}
parent_sc->sc_numraid++;
((struct raid_softc *)raidPtr->sc)->sc_parent_dev = dev;
rf_markalldirty(raidPtr);
} else {
parent_sc->sc_raiddevs[unit] = NULL;
RF_Free(raidPtr, sizeof(*raidPtr));
}
out:
/* free the buffers. No return code here. */
if (k_cfg->layoutSpecificSize) {
RF_Free(specific_buf, k_cfg->layoutSpecificSize);
}
RF_Free(k_cfg, sizeof(RF_Config_t));
break;
case RAIDFRAME_SHUTDOWN:
unit = *(u_int *)data;
if ((unit >= RF_MAX_ARRAYS) ||
(parent_sc->sc_raiddevs[unit] == NULL))
return (EINVAL);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
sc = parent_sc->sc_raiddevs[unit];
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
if ((retcode = raidlock(sc)) != 0)
return (retcode);
/*
* If somebody has a partition mounted, we shouldn't
* shutdown.
*/
if ((sc->sc_flags & RAIDF_OPEN) != 0) {
raidunlock(sc);
return (EBUSY);
}
rf_printf(0, "Shutting down RAIDframe engine\n");
retcode = rf_Shutdown(sc->raidPtr);
RF_THREADGROUP_WAIT_STOP(&sc->raidPtr->engine_tg);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
disk_destroy(&sc->sc_disk);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidunlock(sc);
/* XXX Need to be able to destroy the zone */
uma_zdestroy(sc->sc_cbufpool);
parent_sc->sc_numraid--;
parent_sc->sc_raiddevs[unit] = NULL;
RF_Free(sc->raidPtr, sizeof(*raidPtr));
RF_Free(sc, sizeof(*sc));
break;
default:
retcode = ENOIOCTL;
}
return (retcode);
}
/* ARGSUSED */
int
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
raidopen(struct disk *dp)
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
{
struct raid_softc *sc;
int error = 0;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
sc = dp->d_drv1;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
if ((error = raidlock(sc)) != 0)
return (error);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
dp = &sc->sc_disk;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(1, "Opening raid device %s%d\n", dp->d_name, dp->d_unit);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
/* Generate overall disklabel */
raidgetdefaultlabel(sc->raidPtr, sc, dp);
if (sc->sc_busycount == 0) {
/* First one... mark things as dirty... Note that we *MUST*
have done a configure before this. I DO NOT WANT TO BE
SCRIBBLING TO RANDOM COMPONENTS UNTIL IT'S BEEN DETERMINED
THAT THEY BELONG TOGETHER!!!!! */
/* XXX should check to see if we're only open for reading
here... If so, we needn't do this, but then need some
other way of keeping track of what's happened.. */
rf_markalldirty( sc->raidPtr );
sc->sc_flags |= RAIDF_OPEN;
}
/* Prevent this unit from being unconfigured while open. */
sc->sc_busycount++;
raidunlock(sc);
return (error);
}
/* ARGSUSED */
int
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
raidclose(struct disk *dp)
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
{
struct raid_softc *sc;
int error = 0;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
sc = dp->d_drv1;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
if ((error = raidlock(sc)) != 0)
return (error);
sc->sc_busycount--;
if (sc->sc_busycount == 0) {
sc->sc_flags &= ~RAIDF_OPEN;
rf_update_component_labels(sc->raidPtr,
RF_FINAL_COMPONENT_UPDATE);
}
raidunlock(sc);
return (0);
}
void
raidstrategy(bp)
struct bio *bp;
{
RF_Raid_t *raidPtr;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
struct raid_softc *sc = bp->bio_disk->d_drv1;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
int s;
raidPtr = sc->raidPtr;
if (raidPtr == NULL) {
bp->bio_error = ENODEV;
bp->bio_flags |= BIO_ERROR;
bp->bio_resid = bp->bio_bcount;
biodone(bp);
return;
}
if (!raidPtr->valid) {
bp->bio_error = ENODEV;
bp->bio_flags |= BIO_ERROR;
bp->bio_resid = bp->bio_bcount;
biodone(bp);
return;
}
if (bp->bio_bcount == 0) {
rf_printf(2, "b_bcount is zero..\n");
biodone(bp);
return;
}
s = splbio();
bp->bio_resid = 0;
/* stuff it onto our queue. XXX locking? */
bioq_insert_tail(&sc->bio_queue, bp);
raidstart(raidPtr);
splx(s);
}
int
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
raidioctl(dp, cmd, data, flag, td)
struct disk *dp;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
u_long cmd;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
void *data;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
int flag;
struct thread *td;
{
struct raid_softc *sc;
RF_Raid_t *raidPtr;
RF_RaidDisk_t *diskPtr;
RF_AccTotals_t *totals;
RF_DeviceConfig_t *d_cfg, **ucfgp;
struct rf_recon_req *rrcopy, *rr;
RF_ComponentLabel_t *clabel;
RF_ComponentLabel_t *ci_label;
RF_SingleComponent_t *sparePtr,*componentPtr;
RF_SingleComponent_t *hot_spare, *component;
RF_ProgressInfo_t progressInfo;
int retcode = 0;
int row, column;
int unit;
int i, j, d;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
sc = dp->d_drv1;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidPtr = sc->raidPtr;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(2, "raidioctl: %s%d %ld\n", dp->d_name, dp->d_unit, cmd);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
switch (cmd) {
case RAIDFRAME_GET_COMPONENT_LABEL:
/* need to read the component label for the disk indicated
by row,column in clabel */
/* For practice, let's get it directly fromdisk, rather
than from the in-core copy */
RF_Malloc( clabel, sizeof( RF_ComponentLabel_t ),
(RF_ComponentLabel_t *));
if (clabel == NULL)
return (ENOMEM);
bzero((char *) clabel, sizeof(RF_ComponentLabel_t));
bcopy(data, clabel, sizeof(RF_ComponentLabel_t));
row = clabel->row;
column = clabel->column;
if ((row < 0) || (row >= raidPtr->numRow) ||
(column < 0) || (column >= raidPtr->numCol +
raidPtr->numSpare)) {
RF_Free( clabel, sizeof(RF_ComponentLabel_t));
return(EINVAL);
}
raidread_component_label(raidPtr->Disks[row][column].dev,
raidPtr->raid_cinfo[row][column].ci_vp,
clabel );
bcopy(clabel, data, sizeof(RF_ComponentLabel_t));
RF_Free( clabel, sizeof(RF_ComponentLabel_t));
return (retcode);
case RAIDFRAME_SET_COMPONENT_LABEL:
clabel = (RF_ComponentLabel_t *) data;
/* XXX check the label for valid stuff... */
/* Note that some things *should not* get modified --
the user should be re-initing the labels instead of
trying to patch things.
*/
rf_printf(1, "Got component label:\n");
rf_printf(1, "Version: %d\n",clabel->version);
rf_printf(1, "Serial Number: %d\n",clabel->serial_number);
rf_printf(1, "Mod counter: %d\n",clabel->mod_counter);
rf_printf(1, "Row: %d\n", clabel->row);
rf_printf(1, "Column: %d\n", clabel->column);
rf_printf(1, "Num Rows: %d\n", clabel->num_rows);
rf_printf(1, "Num Columns: %d\n", clabel->num_columns);
rf_printf(1, "Clean: %d\n", clabel->clean);
rf_printf(1, "Status: %d\n", clabel->status);
row = clabel->row;
column = clabel->column;
if ((row < 0) || (row >= raidPtr->numRow) ||
(column < 0) || (column >= raidPtr->numCol)) {
return(EINVAL);
}
/* XXX this isn't allowed to do anything for now :-) */
/* XXX and before it is, we need to fill in the rest
of the fields!?!?!?! */
#if 0
raidwrite_component_label(
raidPtr->Disks[row][column].dev,
raidPtr->raid_cinfo[row][column].ci_vp,
clabel );
#endif
return (0);
case RAIDFRAME_INIT_LABELS:
MALLOC(ci_label, RF_ComponentLabel_t *,
sizeof(RF_ComponentLabel_t), M_RAIDFRAME,
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
clabel = (RF_ComponentLabel_t *) data;
/*
we only want the serial number from
the above. We get all the rest of the information
from the config that was used to create this RAID
set.
*/
raidPtr->serial_number = clabel->serial_number;
raid_init_component_label(raidPtr, ci_label);
ci_label->serial_number = clabel->serial_number;
for(row=0;row<raidPtr->numRow;row++) {
ci_label->row = row;
for(column=0;column<raidPtr->numCol;column++) {
diskPtr = &raidPtr->Disks[row][column];
if (!RF_DEAD_DISK(diskPtr->status)) {
ci_label->partitionSize =
diskPtr->partitionSize;
ci_label->column = column;
raidwrite_component_label(
raidPtr->Disks[row][column].dev,
raidPtr->raid_cinfo[row][column].ci_vp,
ci_label );
}
}
}
FREE(ci_label, M_RAIDFRAME);
return (retcode);
case RAIDFRAME_SET_AUTOCONFIG:
d = rf_set_autoconfig(raidPtr, *(int *) data);
rf_printf(1, "New autoconfig value is: %d\n", d);
*(int *) data = d;
return (retcode);
case RAIDFRAME_SET_ROOT:
d = rf_set_rootpartition(raidPtr, *(int *) data);
rf_printf(1, "New rootpartition value is: %d\n", d);
*(int *) data = d;
return (retcode);
/* initialize all parity */
case RAIDFRAME_REWRITEPARITY:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* Parity for RAID 0 is trivially correct */
raidPtr->parity_good = RF_RAID_CLEAN;
return(0);
}
if (raidPtr->parity_rewrite_in_progress == 1) {
/* Re-write is already in progress! */
return(EINVAL);
}
retcode = RF_CREATE_THREAD(raidPtr->parity_rewrite_thread,
rf_RewriteParityThread,
raidPtr,"raid_parity");
return (retcode);
case RAIDFRAME_ADD_HOT_SPARE:
MALLOC(hot_spare, RF_SingleComponent_t *,
sizeof(RF_SingleComponent_t), M_RAIDFRAME,
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
sparePtr = (RF_SingleComponent_t *) data;
memcpy( hot_spare, sparePtr, sizeof(RF_SingleComponent_t));
retcode = rf_add_hot_spare(raidPtr, hot_spare);
FREE(hot_spare, M_RAIDFRAME);
return(retcode);
case RAIDFRAME_REMOVE_HOT_SPARE:
return(retcode);
case RAIDFRAME_DELETE_COMPONENT:
MALLOC(component, RF_SingleComponent_t *,
sizeof(RF_SingleComponent_t), M_RAIDFRAME,
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
componentPtr = (RF_SingleComponent_t *)data;
memcpy( component, componentPtr,
sizeof(RF_SingleComponent_t));
retcode = rf_delete_component(raidPtr, component);
FREE(component, M_RAIDFRAME);
return(retcode);
case RAIDFRAME_INCORPORATE_HOT_SPARE:
MALLOC(component, RF_SingleComponent_t *,
sizeof(RF_SingleComponent_t), M_RAIDFRAME,
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
componentPtr = (RF_SingleComponent_t *)data;
memcpy( component, componentPtr,
sizeof(RF_SingleComponent_t));
retcode = rf_incorporate_hot_spare(raidPtr, component);
FREE(component, M_RAIDFRAME);
return(retcode);
case RAIDFRAME_REBUILD_IN_PLACE:
MALLOC(component, RF_SingleComponent_t *,
sizeof(RF_SingleComponent_t), M_RAIDFRAME,
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* Can't do this on a RAID 0!! */
FREE(component, M_RAIDFRAME);
return(EINVAL);
}
if (raidPtr->recon_in_progress == 1) {
/* a reconstruct is already in progress! */
FREE(component, M_RAIDFRAME);
return(EINVAL);
}
componentPtr = (RF_SingleComponent_t *) data;
memcpy( component, componentPtr,
sizeof(RF_SingleComponent_t));
row = component->row;
column = component->column;
unit = raidPtr->raidid;
rf_printf(0, "raid%d Rebuild: %d %d\n", unit, row, column);
if ((row < 0) || (row >= raidPtr->numRow) ||
(column < 0) || (column >= raidPtr->numCol)) {
FREE(component, M_RAIDFRAME);
return(EINVAL);
}
RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
if (rrcopy == NULL) {
FREE(component, M_RAIDFRAME);
return(ENOMEM);
}
rrcopy->raidPtr = (void *) raidPtr;
rrcopy->row = row;
rrcopy->col = column;
retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
rf_ReconstructInPlaceThread,
rrcopy,"raid_reconip");
FREE(component, M_RAIDFRAME);
return(retcode);
case RAIDFRAME_GET_UNIT:
*(int *)data = raidPtr->raidid;
return (0);
case RAIDFRAME_GET_INFO:
if (!raidPtr->valid)
return (ENODEV);
ucfgp = (RF_DeviceConfig_t **) data;
RF_Malloc(d_cfg, sizeof(RF_DeviceConfig_t),
(RF_DeviceConfig_t *));
if (d_cfg == NULL)
return (ENOMEM);
bzero((char *) d_cfg, sizeof(RF_DeviceConfig_t));
d_cfg->rows = raidPtr->numRow;
d_cfg->cols = raidPtr->numCol;
d_cfg->ndevs = raidPtr->numRow * raidPtr->numCol;
if (d_cfg->ndevs >= RF_MAX_DISKS) {
RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
return (ENOMEM);
}
d_cfg->nspares = raidPtr->numSpare;
if (d_cfg->nspares >= RF_MAX_DISKS) {
RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
return (ENOMEM);
}
d_cfg->maxqdepth = raidPtr->maxQueueDepth;
d = 0;
for (i = 0; i < d_cfg->rows; i++) {
for (j = 0; j < d_cfg->cols; j++) {
d_cfg->devs[d] = raidPtr->Disks[i][j];
d++;
}
}
for (j = d_cfg->cols, i = 0; i < d_cfg->nspares; i++, j++) {
d_cfg->spares[i] = raidPtr->Disks[0][j];
}
retcode = copyout(d_cfg, *ucfgp, sizeof(RF_DeviceConfig_t));
RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
return (retcode);
case RAIDFRAME_CHECK_PARITY:
*(int *) data = raidPtr->parity_good;
return (0);
case RAIDFRAME_RESET_ACCTOTALS:
bzero(&raidPtr->acc_totals, sizeof(raidPtr->acc_totals));
return (0);
case RAIDFRAME_GET_ACCTOTALS:
totals = (RF_AccTotals_t *) data;
*totals = raidPtr->acc_totals;
return (0);
case RAIDFRAME_KEEP_ACCTOTALS:
raidPtr->keep_acc_totals = *(int *)data;
return (0);
case RAIDFRAME_GET_SIZE:
*(int *) data = raidPtr->totalSectors;
return (0);
/* fail a disk & optionally start reconstruction */
case RAIDFRAME_FAIL_DISK:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* Can't do this on a RAID 0!! */
return(EINVAL);
}
rr = (struct rf_recon_req *) data;
if (rr->row < 0 || rr->row >= raidPtr->numRow
|| rr->col < 0 || rr->col >= raidPtr->numCol)
return (EINVAL);
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(0, "%s%d: Failing the disk: row: %d col: %d\n",
dp->d_name, dp->d_unit, rr->row, rr->col);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
/* make a copy of the recon request so that we don't rely on
* the user's buffer */
RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
if (rrcopy == NULL)
return(ENOMEM);
bcopy(rr, rrcopy, sizeof(*rr));
rrcopy->raidPtr = (void *) raidPtr;
retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
rf_ReconThread,
rrcopy,"raid_recon");
return (0);
/* invoke a copyback operation after recon on whatever disk
* needs it, if any */
case RAIDFRAME_COPYBACK:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* This makes no sense on a RAID 0!! */
return(EINVAL);
}
if (raidPtr->copyback_in_progress == 1) {
/* Copyback is already in progress! */
return(EINVAL);
}
retcode = RF_CREATE_THREAD(raidPtr->copyback_thread,
rf_CopybackThread,
raidPtr,"raid_copyback");
return (retcode);
/* return the percentage completion of reconstruction */
case RAIDFRAME_CHECK_RECON_STATUS:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* This makes no sense on a RAID 0, so tell the
user it's done. */
*(int *) data = 100;
return(0);
}
row = 0; /* XXX we only consider a single row... */
if (raidPtr->status[row] != rf_rs_reconstructing)
*(int *) data = 100;
else
*(int *) data = raidPtr->reconControl[row]->percentComplete;
return (0);
case RAIDFRAME_CHECK_RECON_STATUS_EXT:
row = 0; /* XXX we only consider a single row... */
if (raidPtr->status[row] != rf_rs_reconstructing) {
progressInfo.remaining = 0;
progressInfo.completed = 100;
progressInfo.total = 100;
} else {
progressInfo.total =
raidPtr->reconControl[row]->numRUsTotal;
progressInfo.completed =
raidPtr->reconControl[row]->numRUsComplete;
progressInfo.remaining = progressInfo.total -
progressInfo.completed;
}
bcopy((caddr_t) &progressInfo, data, sizeof(RF_ProgressInfo_t));
return (retcode);
case RAIDFRAME_CHECK_PARITYREWRITE_STATUS:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* This makes no sense on a RAID 0, so tell the
user it's done. */
*(int *) data = 100;
return(0);
}
if (raidPtr->parity_rewrite_in_progress == 1) {
*(int *) data = 100 *
raidPtr->parity_rewrite_stripes_done /
raidPtr->Layout.numStripe;
} else {
*(int *) data = 100;
}
return (0);
case RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT:
if (raidPtr->parity_rewrite_in_progress == 1) {
progressInfo.total = raidPtr->Layout.numStripe;
progressInfo.completed =
raidPtr->parity_rewrite_stripes_done;
progressInfo.remaining = progressInfo.total -
progressInfo.completed;
} else {
progressInfo.remaining = 0;
progressInfo.completed = 100;
progressInfo.total = 100;
}
bcopy((caddr_t) &progressInfo, data, sizeof(RF_ProgressInfo_t));
return (retcode);
case RAIDFRAME_CHECK_COPYBACK_STATUS:
if (raidPtr->Layout.map->faultsTolerated == 0) {
/* This makes no sense on a RAID 0 */
*(int *) data = 100;
return(0);
}
if (raidPtr->copyback_in_progress == 1) {
*(int *) data = 100 * raidPtr->copyback_stripes_done /
raidPtr->Layout.numStripe;
} else {
*(int *) data = 100;
}
return (0);
case RAIDFRAME_CHECK_COPYBACK_STATUS_EXT:
if (raidPtr->copyback_in_progress == 1) {
progressInfo.total = raidPtr->Layout.numStripe;
progressInfo.completed =
raidPtr->copyback_stripes_done;
progressInfo.remaining = progressInfo.total -
progressInfo.completed;
} else {
progressInfo.remaining = 0;
progressInfo.completed = 100;
progressInfo.total = 100;
}
bcopy((caddr_t) &progressInfo, data, sizeof(RF_ProgressInfo_t));
return (retcode);
/* the sparetable daemon calls this to wait for the kernel to
* need a spare table. this ioctl does not return until a
* spare table is needed. XXX -- calling mpsleep here in the
* ioctl code is almost certainly wrong and evil. -- XXX XXX
* -- I should either compute the spare table in the kernel,
* or have a different -- XXX XXX -- interface (a different
* character device) for delivering the table -- XXX */
#if 0
case RAIDFRAME_SPARET_WAIT:
RF_LOCK_MUTEX(rf_sparet_wait_mutex);
while (!rf_sparet_wait_queue)
mpsleep(&rf_sparet_wait_queue, (PZERO + 1) | PCATCH, "sparet wait", 0, (void *) simple_lock_addr(rf_sparet_wait_mutex), MS_LOCK_SIMPLE);
waitreq = rf_sparet_wait_queue;
rf_sparet_wait_queue = rf_sparet_wait_queue->next;
RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
/* structure assignment */
*((RF_SparetWait_t *) data) = *waitreq;
RF_Free(waitreq, sizeof(*waitreq));
return (0);
/* wakes up a process waiting on SPARET_WAIT and puts an error
* code in it that will cause the dameon to exit */
case RAIDFRAME_ABORT_SPARET_WAIT:
RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *));
waitreq->fcol = -1;
RF_LOCK_MUTEX(rf_sparet_wait_mutex);
waitreq->next = rf_sparet_wait_queue;
rf_sparet_wait_queue = waitreq;
RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
wakeup(&rf_sparet_wait_queue);
return (0);
/* used by the spare table daemon to deliver a spare table
* into the kernel */
case RAIDFRAME_SEND_SPARET:
/* install the spare table */
retcode = rf_SetSpareTable(raidPtr, *(void **) data);
/* respond to the requestor. the return status of the spare
* table installation is passed in the "fcol" field */
RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *));
waitreq->fcol = retcode;
RF_LOCK_MUTEX(rf_sparet_wait_mutex);
waitreq->next = rf_sparet_resp_queue;
rf_sparet_resp_queue = waitreq;
wakeup(&rf_sparet_resp_queue);
RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
return (retcode);
#endif
default:
retcode = ENOIOCTL;
break; /* fall through to the os-specific code below */
}
return (retcode);
}
/* raidinit -- complete the rest of the initialization for the
RAIDframe device. */
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
static struct raid_softc *
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidinit(raidPtr)
RF_Raid_t *raidPtr;
{
struct raid_softc *sc;
RF_Malloc(sc, sizeof(struct raid_softc), (struct raid_softc *));
if (sc == NULL) {
rf_printf(1, "No memory for raid device\n");
return(NULL);
}
sc->raidPtr = raidPtr;
/* XXX Should check return code here */
bioq_init(&sc->bio_queue);
sc->sc_cbufpool = uma_zcreate("raidpl", sizeof(struct raidbuf), NULL,
NULL, NULL, NULL, 0, 0);
/* XXX There may be a weird interaction here between this, and
* protectedSectors, as used in RAIDframe. */
sc->sc_size = raidPtr->totalSectors;
/* Create the disk device */
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
sc->sc_disk.d_open = raidopen;
sc->sc_disk.d_close = raidclose;
sc->sc_disk.d_ioctl = raidioctl;
sc->sc_disk.d_strategy = raidstrategy;
sc->sc_disk.d_drv1 = sc;
sc->sc_disk.d_maxsize = DFLTPHYS;
sc->sc_disk.d_name = "raid";
disk_create(raidPtr->raidid, &sc->sc_disk, 0, NULL, NULL);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidPtr->sc = sc;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
return (sc);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
}
/* wake up the daemon & tell it to get us a spare table
* XXX
* the entries in the queues should be tagged with the raidPtr
* so that in the extremely rare case that two recons happen at once,
* we know for which device were requesting a spare table
* XXX
*
* XXX This code is not currently used. GO
*/
int
rf_GetSpareTableFromDaemon(req)
RF_SparetWait_t *req;
{
int retcode;
RF_LOCK_MUTEX(rf_sparet_wait_mutex);
req->next = rf_sparet_wait_queue;
rf_sparet_wait_queue = req;
wakeup(&rf_sparet_wait_queue);
/* mpsleep unlocks the mutex */
while (!rf_sparet_resp_queue) {
tsleep(&rf_sparet_resp_queue, PRIBIO,
"raidframe getsparetable", 0);
}
req = rf_sparet_resp_queue;
rf_sparet_resp_queue = req->next;
RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
retcode = req->fcol;
RF_Free(req, sizeof(*req)); /* this is not the same req as we
* alloc'd */
return (retcode);
}
/* a wrapper around rf_DoAccess that extracts appropriate info from the
* bp & passes it down.
* any calls originating in the kernel must use non-blocking I/O
* do some extra sanity checking to return "appropriate" error values for
* certain conditions (to make some standard utilities work)
*
* Formerly known as: rf_DoAccessKernel
*/
void
raidstart(raidPtr)
RF_Raid_t *raidPtr;
{
RF_SectorCount_t num_blocks, pb, sum;
RF_RaidAddr_t raid_addr;
struct raid_softc *sc;
struct bio *bp;
daddr_t blocknum;
int unit, retcode, do_async;
unit = raidPtr->raidid;
sc = raidPtr->sc;
/* quick check to see if anything has died recently */
RF_LOCK_MUTEX(raidPtr->mutex);
if (raidPtr->numNewFailures > 0) {
raidPtr->numNewFailures--;
RF_UNLOCK_MUTEX(raidPtr->mutex);
rf_update_component_labels(raidPtr,
RF_NORMAL_COMPONENT_UPDATE);
} else
RF_UNLOCK_MUTEX(raidPtr->mutex);
/* Check to see if we're at the limit... */
RF_LOCK_MUTEX(raidPtr->mutex);
while (raidPtr->openings > 0) {
RF_UNLOCK_MUTEX(raidPtr->mutex);
/* get the next item, if any, from the queue */
if ((bp = bioq_first(&sc->bio_queue)) == NULL) {
/* nothing more to do */
return;
}
bioq_remove(&sc->bio_queue, bp);
/* Ok, for the bp we have here, bp->b_blkno is relative to the
* partition.. Need to make it absolute to the underlying
* device.. */
blocknum = bp->bio_blkno;
rf_printf(3, "Blocks: %ld, %ld\n", (long)bp->bio_blkno, (long)blocknum);
rf_printf(3, "bp->bio_bcount = %d\n", (int) bp->bio_bcount);
rf_printf(3, "bp->bio_resid = %d\n", (int) bp->bio_resid);
/* *THIS* is where we adjust what block we're going to...
* but DO NOT TOUCH bp->bio_blkno!!! */
raid_addr = blocknum;
num_blocks = bp->bio_bcount >> raidPtr->logBytesPerSector;
pb = (bp->bio_bcount & raidPtr->sectorMask) ? 1 : 0;
sum = raid_addr + num_blocks + pb;
if (rf_debugKernelAccess) {
rf_printf(0, "raid_addr=0x%x sum=%d num_blocks=%d(+%d) "
"(%d)\n", (int)raid_addr, (int)sum,
(int)num_blocks, (int)pb,
(int)bp->bio_resid);
}
if ((sum > raidPtr->totalSectors) || (sum < raid_addr)
|| (sum < num_blocks) || (sum < pb)) {
bp->bio_error = ENOSPC;
bp->bio_flags |= BIO_ERROR;
bp->bio_resid = bp->bio_bcount;
biodone(bp);
RF_LOCK_MUTEX(raidPtr->mutex);
continue;
}
/*
* XXX rf_DoAccess() should do this, not just DoAccessKernel()
*/
if (bp->bio_bcount & raidPtr->sectorMask) {
bp->bio_error = EINVAL;
bp->bio_flags |= BIO_ERROR;
bp->bio_resid = bp->bio_bcount;
biodone(bp);
RF_LOCK_MUTEX(raidPtr->mutex);
continue;
}
rf_printf(3, "Calling DoAccess..\n");
RF_LOCK_MUTEX(raidPtr->mutex);
raidPtr->openings--;
RF_UNLOCK_MUTEX(raidPtr->mutex);
/*
* Everything is async.
*/
do_async = 1;
/* XXX we're still at splbio() here... do we *really*
need to be? */
/* don't ever condition on bp->bio_cmd & BIO_WRITE.
* always condition on BIO_READ instead */
retcode = rf_DoAccess(raidPtr, (bp->bio_cmd & BIO_READ) ?
RF_IO_TYPE_READ : RF_IO_TYPE_WRITE,
do_async, raid_addr, num_blocks,
bp->bio_data, bp, NULL, NULL,
RF_DAG_NONBLOCKING_IO, NULL, NULL, NULL);
RF_LOCK_MUTEX(raidPtr->mutex);
}
RF_UNLOCK_MUTEX(raidPtr->mutex);
}
/* invoke an I/O from kernel mode. Disk queue should be locked upon entry */
int
rf_DispatchKernelIO(queue, req)
RF_DiskQueue_t *queue;
RF_DiskQueueData_t *req;
{
int op = (req->type == RF_IO_TYPE_READ) ? BIO_READ : BIO_WRITE;
struct bio *bp;
struct raidbuf *raidbp = NULL;
struct raid_softc *sc;
/* XXX along with the vnode, we also need the softc associated with
* this device.. */
req->queue = queue;
sc = queue->raidPtr->sc;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(3, "DispatchKernelIO %s\n", sc->sc_disk.d_name);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
bp = req->bp;
#if 1
/* XXX when there is a physical disk failure, someone is passing us a
* buffer that contains old stuff!! Attempt to deal with this problem
* without taking a performance hit... (not sure where the real bug
* is. It's buried in RAIDframe somewhere) :-( GO ) */
if (bp->bio_flags & BIO_ERROR) {
bp->bio_flags &= ~BIO_ERROR;
}
if (bp->bio_error != 0) {
bp->bio_error = 0;
}
#endif
raidbp = RAIDGETBUF(sc);
raidbp->rf_flags = 0; /* XXX not really used anywhere... */
/*
* context for raidiodone
*/
raidbp->rf_obp = bp;
raidbp->req = req;
#if 0 /* XXX */
LIST_INIT(&raidbp->rf_buf.b_dep);
#endif
switch (req->type) {
case RF_IO_TYPE_NOP: /* used primarily to unlock a locked queue */
/* XXX need to do something extra here.. */
/* I'm leaving this in, as I've never actually seen it used,
* and I'd like folks to report it... GO */
rf_printf(2, "WAKEUP CALLED\n");
queue->numOutstanding++;
/* XXX need to glue the original buffer into this? */
KernelWakeupFunc(&raidbp->rf_buf);
break;
case RF_IO_TYPE_READ:
case RF_IO_TYPE_WRITE:
if (req->tracerec) {
RF_ETIMER_START(req->tracerec->timer);
}
InitBP(&raidbp->rf_buf, queue->rf_cinfo->ci_vp,
op | bp->bio_cmd, queue->rf_cinfo->ci_dev,
req->sectorOffset, req->numSector,
req->buf, KernelWakeupFunc, (void *) req,
queue->raidPtr->logBytesPerSector, req->b_proc);
if (rf_debugKernelAccess) {
rf_printf(0, "dispatch: bp->bio_blkno = %ld\n",
(long) bp->bio_blkno);
}
queue->numOutstanding++;
queue->last_deq_sector = req->sectorOffset;
/* acc wouldn't have been let in if there were any pending
* reqs at any other priority */
queue->curPriority = req->priority;
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(3, "Going for %c to %s%d row %d col %d\n",
req->type, sc->sc_disk.d_name,
sc->sc_disk.d_unit, queue->row, queue->col);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
rf_printf(3, "sector %d count %d (%d bytes) %d\n",
(int) req->sectorOffset, (int) req->numSector,
(int) (req->numSector <<
queue->raidPtr->logBytesPerSector),
(int) queue->raidPtr->logBytesPerSector);
#if 0 /* XXX */
if ((raidbp->rf_buf.bio_cmd & BIO_READ) == 0) {
raidbp->rf_buf.b_vp->v_numoutput++;
}
#endif
Remove unused second argument from BIO_STRATEGY()
2003-01-03 05:51:11 +00:00
BIO_STRATEGY(&raidbp->rf_buf);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
break;
default:
panic("bad req->type in rf_DispatchKernelIO");
}
rf_printf(3, "Exiting from DispatchKernelIO\n");
/* splx(s); */ /* want to test this */
return (0);
}
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
2003-01-01 18:49:04 +00:00
/* This is the callback function associated with an I/O invoked from
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
kernel code.
*/
static void
KernelWakeupFunc(vbp)
struct bio *vbp;
{
RF_DiskQueueData_t *req = NULL;
RF_DiskQueue_t *queue;
struct raidbuf *raidbp = (struct raidbuf *) vbp;
struct bio *bp;
struct raid_softc *sc;
int s;
s = splbio();
rf_printf(2, "recovering the request queue:\n");
req = raidbp->req;
bp = raidbp->rf_obp;
queue = (RF_DiskQueue_t *) req->queue;
sc = queue->raidPtr->sc;
if (raidbp->rf_buf.bio_flags & BIO_ERROR) {
bp->bio_flags |= BIO_ERROR;
bp->bio_error = raidbp->rf_buf.bio_error ?
raidbp->rf_buf.bio_error : EIO;
}
/* XXX methinks this could be wrong... */
#if 1
bp->bio_resid = raidbp->rf_buf.bio_resid;
#endif
if (req->tracerec) {
RF_ETIMER_STOP(req->tracerec->timer);
RF_ETIMER_EVAL(req->tracerec->timer);
RF_LOCK_MUTEX(rf_tracing_mutex);
req->tracerec->diskwait_us += RF_ETIMER_VAL_US(req->tracerec->timer);
req->tracerec->phys_io_us += RF_ETIMER_VAL_US(req->tracerec->timer);
req->tracerec->num_phys_ios++;
RF_UNLOCK_MUTEX(rf_tracing_mutex);
}
bp->bio_bcount = raidbp->rf_buf.bio_bcount; /* XXXX ? */
/* XXX Ok, let's get aggressive... If BIO_ERROR is set, let's go
* ballistic, and mark the component as hosed... */
if (bp->bio_flags & BIO_ERROR) {
/* Mark the disk as dead */
/* but only mark it once... */
if (queue->raidPtr->Disks[queue->row][queue->col].status ==
rf_ds_optimal) {
NO_GEOM cleanup: Move <sys/conf.h> before <sys/disk.h>. No need for raidread()/raidwrite(), we have generic code for that. Remove non-functional dump code. Make raidinit() return the softc, not the dev_t. Move to "struct disk*" centric API. Fix printfs' to get name from struct disk instead of dev_t. OK'ed by: scottl
2003-02-27 22:04:08 +00:00
rf_printf(0, "%s%d: IO Error. Marking %s as "
"failed.\n", sc->sc_disk.d_name, sc->sc_disk.d_unit,
queue->raidPtr->Disks[queue->row][queue->col].devname);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
queue->raidPtr->Disks[queue->row][queue->col].status =
rf_ds_failed;
queue->raidPtr->status[queue->row] = rf_rs_degraded;
queue->raidPtr->numFailures++;
queue->raidPtr->numNewFailures++;
} else { /* Disk is already dead... */
/* printf("Disk already marked as dead!\n"); */
}
}
RAIDPUTBUF(sc, raidbp);
rf_DiskIOComplete(queue, req, (bp->bio_flags & BIO_ERROR) ? 1 : 0);
(req->CompleteFunc)(req->argument, (bp->bio_flags & BIO_ERROR) ? 1 : 0);
splx(s);
}
/*
* initialize a buf structure for doing an I/O in the kernel.
*/
static void
InitBP(bp, b_vp, rw_flag, dev, startSect, numSect, buf, cbFunc, cbArg,
logBytesPerSector, b_proc)
struct bio *bp;
struct vnode *b_vp;
unsigned rw_flag;
dev_t dev;
RF_SectorNum_t startSect;
RF_SectorCount_t numSect;
caddr_t buf;
void (*cbFunc) (struct bio *);
void *cbArg;
int logBytesPerSector;
struct proc *b_proc;
{
/* bp->b_flags = B_PHYS | rw_flag; */
bp->bio_cmd = rw_flag; /* XXX need B_PHYS here too? */
bp->bio_bcount = numSect << logBytesPerSector;
#if 0 /* XXX */
bp->bio_bufsize = bp->bio_bcount;
#endif
bp->bio_error = 0;
bp->bio_dev = dev;
bp->bio_data = buf;
bp->bio_blkno = startSect;
bp->bio_resid = bp->bio_bcount; /* XXX is this right!?!?!! */
if (bp->bio_bcount == 0) {
panic("bp->bio_bcount is zero in InitBP!!\n");
}
/*
bp->b_proc = b_proc;
bp->b_vp = b_vp;
*/
bp->bio_done = cbFunc;
}
static void
raidgetdefaultlabel(raidPtr, sc, dp)
RF_Raid_t *raidPtr;
struct raid_softc *sc;
struct disk *dp;
{
rf_printf(1, "Building a default label...\n");
if (dp == NULL)
panic("raidgetdefaultlabel(): dp is NULL\n");
/* fabricate a label... */
dp->d_mediasize = raidPtr->totalSectors * raidPtr->bytesPerSector;
dp->d_sectorsize = raidPtr->bytesPerSector;
dp->d_fwsectors = raidPtr->Layout.dataSectorsPerStripe;
dp->d_fwheads = 4 * raidPtr->numCol;
}
/*
* Lookup the provided name in the filesystem. If the file exists,
* is a valid block device, and isn't being used by anyone else,
* set *vpp to the file's vnode.
* You'll find the original of this in ccd.c
*/
int
raidlookup(path, td, vpp)
char *path;
struct thread *td;
struct vnode **vpp; /* result */
{
struct nameidata *nd;
struct vnode *vp;
struct vattr *va;
struct proc *p;
int error = 0, flags;
MALLOC(nd, struct nameidata *, sizeof(struct nameidata), M_TEMP, M_NOWAIT | M_ZERO);
MALLOC(va, struct vattr *, sizeof(struct vattr), M_TEMP, M_NOWAIT | M_ZERO);
if ((nd == NULL) || (va == NULL)) {
printf("Out of memory?\n");
return (ENOMEM);
}
/* Sanity check the p_fd fields. This is really just a hack */
p = td->td_proc;
if (!p->p_fd->fd_rdir || !p->p_fd->fd_cdir)
printf("Warning: p_fd fields not set\n");
if (!td->td_proc->p_fd->fd_rdir)
p->p_fd->fd_rdir = rootvnode;
if (!p->p_fd->fd_cdir)
p->p_fd->fd_cdir = rootvnode;
NDINIT(nd, LOOKUP, FOLLOW, UIO_SYSSPACE, path, curthread);
flags = FREAD | FWRITE;
Add fdidx argument to vn_open() and vn_open_cred() and pass -1 throughout.
2003-07-27 17:04:56 +00:00
if ((error = vn_open(nd, &flags, 0, -1)) != 0) {
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
rf_printf(2, "RAIDframe: vn_open returned %d\n", error);
goto end1;
}
vp = nd->ni_vp;
if (vp->v_usecount > 1) {
rf_printf(1, "raidlookup() vp->v_usecount= %d\n", vp->v_usecount);
error = EBUSY;
goto end;
}
if ((error = VOP_GETATTR(vp, va, td->td_ucred, td)) != 0) {
rf_printf(1, "raidlookup() VOP_GETATTR returned %d", error);
goto end;
}
/* XXX: eventually we should handle VREG, too. */
if (va->va_type != VCHR) {
rf_printf(1, "Returning ENOTBLK\n");
error = ENOTBLK;
}
*vpp = vp;
end:
VOP_UNLOCK(vp, 0, td);
NDFREE(nd, NDF_ONLY_PNBUF);
end1:
FREE(nd, M_TEMP);
FREE(va, M_TEMP);
return (error);
}
/*
* Wait interruptibly for an exclusive lock.
*
* XXX
* Several drivers do this; it should be abstracted and made MP-safe.
* (Hmm... where have we seen this warning before :-> GO )
*/
static int
raidlock(sc)
struct raid_softc *sc;
{
int error;
while ((sc->sc_flags & RAIDF_LOCKED) != 0) {
sc->sc_flags |= RAIDF_WANTED;
if ((error =
tsleep(sc, PRIBIO | PCATCH, "raidlck", 0)) != 0)
return (error);
}
sc->sc_flags |= RAIDF_LOCKED;
return (0);
}
/*
* Unlock and wake up any waiters.
*/
static void
raidunlock(sc)
struct raid_softc *sc;
{
sc->sc_flags &= ~RAIDF_LOCKED;
if ((sc->sc_flags & RAIDF_WANTED) != 0) {
sc->sc_flags &= ~RAIDF_WANTED;
wakeup(sc);
}
}
#define RF_COMPONENT_INFO_OFFSET 16384 /* bytes */
#define RF_COMPONENT_INFO_SIZE 1024 /* bytes */
int
raidmarkclean(dev_t dev, struct vnode *b_vp, int mod_counter)
{
RF_ComponentLabel_t *clabel;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
M_RAIDFRAME, M_NOWAIT | M_ZERO);
if (clabel == NULL) {
printf("raidmarkclean: Out of memory?\n");
return (ENOMEM);
}
raidread_component_label(dev, b_vp, clabel);
clabel->mod_counter = mod_counter;
clabel->clean = RF_RAID_CLEAN;
raidwrite_component_label(dev, b_vp, clabel);
FREE(clabel, M_RAIDFRAME);
return(0);
}
int
raidmarkdirty(dev_t dev, struct vnode *b_vp, int mod_counter)
{
RF_ComponentLabel_t *clabel;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
M_RAIDFRAME, M_NOWAIT | M_ZERO);
if (clabel == NULL) {
printf("raidmarkclean: Out of memory?\n");
return (ENOMEM);
}
raidread_component_label(dev, b_vp, clabel);
clabel->mod_counter = mod_counter;
clabel->clean = RF_RAID_DIRTY;
raidwrite_component_label(dev, b_vp, clabel);
FREE(clabel, M_RAIDFRAME);
return(0);
}
/* ARGSUSED */
int
raidread_component_label(dev, b_vp, clabel)
dev_t dev;
struct vnode *b_vp;
RF_ComponentLabel_t *clabel;
{
struct buf *bp;
int error;
/* XXX should probably ensure that we don't try to do this if
someone has changed rf_protected_sectors. */
if (b_vp == NULL) {
/* For whatever reason, this component is not valid.
Don't try to read a component label from it. */
return(EINVAL);
}
/* get a block of the appropriate size... */
bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
bp->b_dev = dev;
/* get our ducks in a row for the read */
bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
bp->b_bcount = RF_COMPONENT_INFO_SIZE;
bp->b_iocmd = BIO_READ;
bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;
Remove unused second argument from DEV_STRATEGY().
2003-01-03 05:57:35 +00:00
DEV_STRATEGY(bp);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
error = bufwait(bp);
if (!error) {
memcpy(clabel, bp->b_data, sizeof(RF_ComponentLabel_t));
#if 0
rf_print_component_label( clabel );
#endif
} else {
#if 0
rf_printf(0, "Failed to read RAID component label!\n");
#endif
}
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
return(error);
}
/* ARGSUSED */
int
raidwrite_component_label(dev, b_vp, clabel)
dev_t dev;
struct vnode *b_vp;
RF_ComponentLabel_t *clabel;
{
struct buf *bp;
int error;
/* get a block of the appropriate size... */
bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
bp->b_dev = dev;
/* get our ducks in a row for the write */
bp->b_flags = 0;
bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
bp->b_bcount = RF_COMPONENT_INFO_SIZE;
bp->b_iocmd = BIO_WRITE;
bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;
memset(bp->b_data, 0, RF_COMPONENT_INFO_SIZE );
memcpy(bp->b_data, clabel, sizeof(RF_ComponentLabel_t));
Remove unused second argument from DEV_STRATEGY().
2003-01-03 05:57:35 +00:00
DEV_STRATEGY(bp);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
error = bufwait(bp);
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
if (error) {
#if 1
rf_printf(0, "Failed to write RAID component info!\n");
rf_printf(0, "b_error= %d\n", bp->b_error);
#endif
}
return(error);
}
void
rf_markalldirty(raidPtr)
RF_Raid_t *raidPtr;
{
RF_ComponentLabel_t *clabel;
int r,c;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
M_RAIDFRAME, M_NOWAIT | M_ZERO);
if (clabel == NULL) {
printf("rf_markalldirty: Out of memory?\n");
return;
}
raidPtr->mod_counter++;
for (r = 0; r < raidPtr->numRow; r++) {
for (c = 0; c < raidPtr->numCol; c++) {
/* we don't want to touch (at all) a disk that has
failed */
if (!RF_DEAD_DISK(raidPtr->Disks[r][c].status)) {
raidread_component_label(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
clabel);
if (clabel->status == rf_ds_spared) {
/* XXX do something special...
but whatever you do, don't
try to access it!! */
} else {
#if 0
clabel->status =
raidPtr->Disks[r][c].status;
raidwrite_component_label(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
clabel);
#endif
raidmarkdirty(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
raidPtr->mod_counter);
}
}
}
}
/* printf("Component labels marked dirty.\n"); */
#if 0
for( c = 0; c < raidPtr->numSpare ; c++) {
sparecol = raidPtr->numCol + c;
if (raidPtr->Disks[r][sparecol].status == rf_ds_used_spare) {
/*
XXX this is where we get fancy and map this spare
into it's correct spot in the array.
*/
/*
we claim this disk is "optimal" if it's
rf_ds_used_spare, as that means it should be
directly substitutable for the disk it replaced.
We note that too...
*/
for(i=0;i<raidPtr->numRow;i++) {
for(j=0;j<raidPtr->numCol;j++) {
if ((raidPtr->Disks[i][j].spareRow ==
r) &&
(raidPtr->Disks[i][j].spareCol ==
sparecol)) {
srow = r;
scol = sparecol;
break;
}
}
}
raidread_component_label(
raidPtr->Disks[r][sparecol].dev,
raidPtr->raid_cinfo[r][sparecol].ci_vp,
&clabel);
/* make sure status is noted */
clabel.version = RF_COMPONENT_LABEL_VERSION;
clabel.mod_counter = raidPtr->mod_counter;
clabel.serial_number = raidPtr->serial_number;
clabel.row = srow;
clabel.column = scol;
clabel.num_rows = raidPtr->numRow;
clabel.num_columns = raidPtr->numCol;
clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/
clabel.status = rf_ds_optimal;
raidwrite_component_label(
raidPtr->Disks[r][sparecol].dev,
raidPtr->raid_cinfo[r][sparecol].ci_vp,
&clabel);
raidmarkclean( raidPtr->Disks[r][sparecol].dev,
raidPtr->raid_cinfo[r][sparecol].ci_vp);
}
}
#endif
FREE(clabel, M_RAIDFRAME);
}
void
rf_update_component_labels(raidPtr, final)
RF_Raid_t *raidPtr;
int final;
{
RF_ComponentLabel_t *clabel;
int sparecol;
int r,c;
int i,j;
int srow, scol;
srow = -1;
scol = -1;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
M_RAIDFRAME, M_NOWAIT | M_ZERO);
if (clabel == NULL) {
printf("rf_update_component_labels: Out of memory?\n");
return;
}
/* XXX should do extra checks to make sure things really are clean,
rather than blindly setting the clean bit... */
raidPtr->mod_counter++;
for (r = 0; r < raidPtr->numRow; r++) {
for (c = 0; c < raidPtr->numCol; c++) {
if (raidPtr->Disks[r][c].status == rf_ds_optimal) {
raidread_component_label(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
clabel);
/* make sure status is noted */
clabel->status = rf_ds_optimal;
/* bump the counter */
clabel->mod_counter = raidPtr->mod_counter;
raidwrite_component_label(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
clabel);
if (final == RF_FINAL_COMPONENT_UPDATE) {
if (raidPtr->parity_good == RF_RAID_CLEAN) {
raidmarkclean(
raidPtr->Disks[r][c].dev,
raidPtr->raid_cinfo[r][c].ci_vp,
raidPtr->mod_counter);
}
}
}
/* else we don't touch it.. */
}
}
for( c = 0; c < raidPtr->numSpare ; c++) {
sparecol = raidPtr->numCol + c;
if (raidPtr->Disks[0][sparecol].status == rf_ds_used_spare) {
/*
we claim this disk is "optimal" if it's
rf_ds_used_spare, as that means it should be
directly substitutable for the disk it replaced.
We note that too...
*/
for(i=0;i<raidPtr->numRow;i++) {
for(j=0;j<raidPtr->numCol;j++) {
if ((raidPtr->Disks[i][j].spareRow ==
0) &&
(raidPtr->Disks[i][j].spareCol ==
sparecol)) {
srow = i;
scol = j;
break;
}
}
}
/* XXX shouldn't *really* need this... */
raidread_component_label(
raidPtr->Disks[0][sparecol].dev,
raidPtr->raid_cinfo[0][sparecol].ci_vp,
clabel);
/* make sure status is noted */
raid_init_component_label(raidPtr, clabel);
clabel->mod_counter = raidPtr->mod_counter;
clabel->row = srow;
clabel->column = scol;
clabel->status = rf_ds_optimal;
raidwrite_component_label(
raidPtr->Disks[0][sparecol].dev,
raidPtr->raid_cinfo[0][sparecol].ci_vp,
clabel);
if (final == RF_FINAL_COMPONENT_UPDATE) {
if (raidPtr->parity_good == RF_RAID_CLEAN) {
raidmarkclean( raidPtr->Disks[0][sparecol].dev,
raidPtr->raid_cinfo[0][sparecol].ci_vp,
raidPtr->mod_counter);
}
}
}
}
FREE(clabel, M_RAIDFRAME);
rf_printf(1, "Component labels updated\n");
}
void
rf_close_component(raidPtr, vp, auto_configured)
RF_Raid_t *raidPtr;
struct vnode *vp;
int auto_configured;
{
struct thread *td;
td = raidPtr->engine_thread;
if (vp != NULL) {
if (auto_configured == 1) {
VOP_CLOSE(vp, FREAD | FWRITE, td->td_ucred, td);
vrele(vp);
} else {
vn_close(vp, FREAD | FWRITE, td->td_ucred, td);
}
} else {
rf_printf(1, "vnode was NULL\n");
}
}
void
rf_UnconfigureVnodes(raidPtr)
RF_Raid_t *raidPtr;
{
int r,c;
struct thread *td;
struct vnode *vp;
int acd;
/* We take this opportunity to close the vnodes like we should.. */
td = raidPtr->engine_thread;
for (r = 0; r < raidPtr->numRow; r++) {
for (c = 0; c < raidPtr->numCol; c++) {
rf_printf(1, "Closing vnode for row: %d col: %d\n", r, c);
vp = raidPtr->raid_cinfo[r][c].ci_vp;
acd = raidPtr->Disks[r][c].auto_configured;
rf_close_component(raidPtr, vp, acd);
raidPtr->raid_cinfo[r][c].ci_vp = NULL;
raidPtr->Disks[r][c].auto_configured = 0;
}
}
for (r = 0; r < raidPtr->numSpare; r++) {
rf_printf(1, "Closing vnode for spare: %d\n", r);
vp = raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp;
acd = raidPtr->Disks[0][raidPtr->numCol + r].auto_configured;
rf_close_component(raidPtr, vp, acd);
raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp = NULL;
raidPtr->Disks[0][raidPtr->numCol + r].auto_configured = 0;
}
}
void
rf_ReconThread(req)
struct rf_recon_req *req;
{
RF_Raid_t *raidPtr;
mtx_lock(&Giant);
raidPtr = (RF_Raid_t *) req->raidPtr;
raidPtr->recon_in_progress = 1;
rf_FailDisk((RF_Raid_t *) req->raidPtr, req->row, req->col,
((req->flags & RF_FDFLAGS_RECON) ? 1 : 0));
/* XXX get rid of this! we don't need it at all.. */
RF_Free(req, sizeof(*req));
raidPtr->recon_in_progress = 0;
/* That's all... */
RF_THREAD_EXIT(0); /* does not return */
}
void
rf_RewriteParityThread(raidPtr)
RF_Raid_t *raidPtr;
{
int retcode;
mtx_lock(&Giant);
raidPtr->parity_rewrite_in_progress = 1;
retcode = rf_RewriteParity(raidPtr);
if (retcode) {
rf_printf(0, "raid%d: Error re-writing parity!\n",raidPtr->raidid);
} else {
/* set the clean bit! If we shutdown correctly,
the clean bit on each component label will get
set */
raidPtr->parity_good = RF_RAID_CLEAN;
}
raidPtr->parity_rewrite_in_progress = 0;
/* Anyone waiting for us to stop? If so, inform them... */
if (raidPtr->waitShutdown) {
wakeup(&raidPtr->parity_rewrite_in_progress);
}
/* That's all... */
RF_THREAD_EXIT(0); /* does not return */
}
void
rf_CopybackThread(raidPtr)
RF_Raid_t *raidPtr;
{
mtx_lock(&Giant);
raidPtr->copyback_in_progress = 1;
rf_CopybackReconstructedData(raidPtr);
raidPtr->copyback_in_progress = 0;
/* That's all... */
RF_THREAD_EXIT(0); /* does not return */
}
void
rf_ReconstructInPlaceThread(req)
struct rf_recon_req *req;
{
int retcode;
RF_Raid_t *raidPtr;
mtx_lock(&Giant);
raidPtr = req->raidPtr;
raidPtr->recon_in_progress = 1;
retcode = rf_ReconstructInPlace(raidPtr, req->row, req->col);
RF_Free(req, sizeof(*req));
raidPtr->recon_in_progress = 0;
/* That's all... */
RF_THREAD_EXIT(0); /* does not return */
}
RF_AutoConfig_t *
rf_find_raid_components()
{
RF_AutoConfig_t *ac_list = NULL;
#if 0 /* XXX GEOM */
struct vnode *vp;
struct disklabel *label;
struct diskslice *slice;
struct diskslices *slices;
struct disk *disk;
struct thread *td;
dev_t dev;
char *devname;
int error, j;
int nslices;
td = curthread;
MALLOC(label, struct disklabel *, sizeof(struct disklabel),
M_RAIDFRAME, M_NOWAIT|M_ZERO);
MALLOC(slices, struct diskslices *, sizeof(struct diskslices),
M_RAIDFRAME, M_NOWAIT|M_ZERO);
if ((label == NULL) || (slices == NULL)) {
printf("rf_find_raid_components: Out of Memory?\n");
return (NULL);
}
/* initialize the AutoConfig list */
ac_list = NULL;
/* we begin by trolling through *all* the disk devices on the system */
disk = NULL;
while ((disk = disk_enumerate(disk))) {
/* we don't care about floppies... */
devname = disk->d_dev->si_name;
if (!strncmp(devname, "fd", 2) ||
!strncmp(devname, "cd", 2) ||
!strncmp(devname, "acd", 3))
continue;
rf_printf(1, "Examining %s\n", disk->d_dev->si_name);
if (bdevvp(disk->d_dev, &vp))
panic("RAIDframe can't alloc vnode");
vref(vp);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td);
Add a "int fd" argument to VOP_OPEN() which in the future will contain the filedescriptor number on opens from userland. The index is used rather than a "struct file *" since it conveys a bit more information, which may be useful to in particular fdescfs and /dev/fd/* For now pass -1 all over the place.
2003-07-26 07:32:23 +00:00
error = VOP_OPEN(vp, FREAD, td->td_ucred, td, -1);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
VOP_UNLOCK(vp, 0, td);
if (error) {
vput(vp);
continue;
}
error = VOP_IOCTL(vp, DIOCGSLICEINFO, (caddr_t)slices,
FREAD, td->td_ucred, td);
VOP_CLOSE(vp, FREAD | FWRITE, td->td_ucred, td);
vrele(vp);
if (error) {
/* No slice table. */
continue;
}
nslices = slices->dss_nslices;
if ((nslices == 0) || (nslices > MAX_SLICES))
continue;
/* Iterate through the slices */
for (j = 1; j < nslices; j++) {
rf_printf(1, "Examining slice %d\n", j);
slice = &slices->dss_slices[j - 1];
dev = dkmodslice(disk->d_dev, j);
if (bdevvp(dev, &vp))
panic("RAIDframe can't alloc vnode");
vref(vp);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td);
Add a "int fd" argument to VOP_OPEN() which in the future will contain the filedescriptor number on opens from userland. The index is used rather than a "struct file *" since it conveys a bit more information, which may be useful to in particular fdescfs and /dev/fd/* For now pass -1 all over the place.
2003-07-26 07:32:23 +00:00
error = VOP_OPEN(vp, FREAD, td->td_ucred, td, -1);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
VOP_UNLOCK(vp, 0, td);
if (error) {
continue;
}
error = VOP_IOCTL(vp, DIOCGDINFO, (caddr_t)label,
FREAD, td->td_ucred, td);
VOP_CLOSE(vp, FREAD | FWRITE, td->td_ucred, td);
vrele(vp);
if (error)
continue;
rf_search_label(dev, label, &ac_list);
}
}
FREE(label, M_RAIDFRAME);
FREE(slices, M_RAIDFRAME);
#endif
return (ac_list);
}
static void
rf_search_label(dev_t dev, struct disklabel *label, RF_AutoConfig_t **ac_list)
{
RF_AutoConfig_t *ac;
RF_ComponentLabel_t *clabel;
struct vnode *vp;
struct thread *td;
dev_t dev1;
int i, error, good_one;
td = curthread;
/* Iterate through the partitions */
for (i=0; i < label->d_npartitions; i++) {
/* We only support partitions marked as RAID */
if (label->d_partitions[i].p_fstype != FS_RAID)
continue;
#if 0 one more line to make this compile without subr_disklabel.c. Hopefully forgiven by: scottl
2003-01-20 19:43:46 +00:00
#if 0 /* GEOM */
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
dev1 = dkmodpart(dev, i);
#if 0 one more line to make this compile without subr_disklabel.c. Hopefully forgiven by: scottl
2003-01-20 19:43:46 +00:00
#else
dev1 = NULL;
#endif
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
if (dev1 == NULL) {
rf_printf(1, "dev1 == null\n");
continue;
}
if (bdevvp(dev1, &vp))
panic("RAIDframe can't alloc vnode");
vref(vp);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td);
Add a "int fd" argument to VOP_OPEN() which in the future will contain the filedescriptor number on opens from userland. The index is used rather than a "struct file *" since it conveys a bit more information, which may be useful to in particular fdescfs and /dev/fd/* For now pass -1 all over the place.
2003-07-26 07:32:23 +00:00
error = VOP_OPEN(vp, FREAD, td->td_ucred, td, -1);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
VOP_UNLOCK(vp, 0, td);
if (error) {
/* Whatever... */
continue;
}
good_one = 0;
clabel = (RF_ComponentLabel_t *)
malloc(sizeof(RF_ComponentLabel_t), M_RAIDFRAME,
M_NOWAIT);
if (clabel == NULL) {
/* XXX CLEANUP HERE */
panic("RAID autoconfig: no memory!\n");
}
if (!raidread_component_label(dev1, vp, clabel)) {
/* Got the label. Is it reasonable? */
if (rf_reasonable_label(clabel) &&
(clabel->partitionSize <=
label->d_partitions[i].p_size)) {
rf_printf(1, "Component on: %s: %d\n",
dev1->si_name, label->d_partitions[i].p_size);
rf_print_component_label(clabel);
/* if it's reasonable, add it, else ignore it */
ac = (RF_AutoConfig_t *)
malloc(sizeof(RF_AutoConfig_t),
M_RAIDFRAME, M_NOWAIT);
if (ac == NULL) {
/* XXX should panic? */
panic("RAID autoconfig: no memory!\n");
}
sprintf(ac->devname, "%s", dev->si_name);
ac->dev = dev1;
ac->vp = vp;
ac->clabel = clabel;
ac->next = *ac_list;
*ac_list = ac;
good_one = 1;
}
}
if (!good_one) {
/* cleanup */
free(clabel, M_RAIDFRAME);
VOP_CLOSE(vp, FREAD | FWRITE, td->td_ucred, td);
vrele(vp);
}
}
}
static int
rf_reasonable_label(clabel)
RF_ComponentLabel_t *clabel;
{
if (((clabel->version==RF_COMPONENT_LABEL_VERSION_1) ||
(clabel->version==RF_COMPONENT_LABEL_VERSION)) &&
((clabel->clean == RF_RAID_CLEAN) ||
(clabel->clean == RF_RAID_DIRTY)) &&
clabel->row >=0 &&
clabel->column >= 0 &&
clabel->num_rows > 0 &&
clabel->num_columns > 0 &&
clabel->row < clabel->num_rows &&
clabel->column < clabel->num_columns &&
clabel->blockSize > 0 &&
clabel->numBlocks > 0) {
/* label looks reasonable enough... */
return(1);
}
return(0);
}
void
rf_print_component_label(clabel)
RF_ComponentLabel_t *clabel;
{
rf_printf(1, " Row: %d Column: %d Num Rows: %d Num Columns: %d\n",
clabel->row, clabel->column,
clabel->num_rows, clabel->num_columns);
rf_printf(1, " Version: %d Serial Number: %d Mod Counter: %d\n",
clabel->version, clabel->serial_number,
clabel->mod_counter);
rf_printf(1, " Clean: %s Status: %d\n",
clabel->clean ? "Yes" : "No", clabel->status );
rf_printf(1, " sectPerSU: %d SUsPerPU: %d SUsPerRU: %d\n",
clabel->sectPerSU, clabel->SUsPerPU, clabel->SUsPerRU);
rf_printf(1, " RAID Level: %c blocksize: %d numBlocks: %d\n",
(char) clabel->parityConfig, clabel->blockSize,
clabel->numBlocks);
rf_printf(1, " Autoconfig: %s\n", clabel->autoconfigure ? "Yes":"No");
rf_printf(1, " Contains root partition: %s\n",
clabel->root_partition ? "Yes" : "No" );
rf_printf(1, " Last configured as: raid%d\n", clabel->last_unit );
#if 0
rf_printf(1, " Config order: %d\n", clabel->config_order);
#endif
}
RF_ConfigSet_t *
rf_create_auto_sets(ac_list)
RF_AutoConfig_t *ac_list;
{
RF_AutoConfig_t *ac;
RF_ConfigSet_t *config_sets;
RF_ConfigSet_t *cset;
RF_AutoConfig_t *ac_next;
config_sets = NULL;
/* Go through the AutoConfig list, and figure out which components
belong to what sets. */
ac = ac_list;
while(ac!=NULL) {
/* we're going to putz with ac->next, so save it here
for use at the end of the loop */
ac_next = ac->next;
if (config_sets == NULL) {
/* will need at least this one... */
config_sets = (RF_ConfigSet_t *)
malloc(sizeof(RF_ConfigSet_t),
M_RAIDFRAME, M_NOWAIT);
if (config_sets == NULL) {
panic("rf_create_auto_sets: No memory!\n");
}
/* this one is easy :) */
config_sets->ac = ac;
config_sets->next = NULL;
config_sets->rootable = 0;
ac->next = NULL;
} else {
/* which set does this component fit into? */
cset = config_sets;
while(cset!=NULL) {
if (rf_does_it_fit(cset, ac)) {
/* looks like it matches... */
ac->next = cset->ac;
cset->ac = ac;
break;
}
cset = cset->next;
}
if (cset==NULL) {
/* didn't find a match above... new set..*/
cset = (RF_ConfigSet_t *)
malloc(sizeof(RF_ConfigSet_t),
M_RAIDFRAME, M_NOWAIT);
if (cset == NULL) {
panic("rf_create_auto_sets: No memory!\n");
}
cset->ac = ac;
ac->next = NULL;
cset->next = config_sets;
cset->rootable = 0;
config_sets = cset;
}
}
ac = ac_next;
}
return(config_sets);
}
static int
rf_does_it_fit(cset, ac)
RF_ConfigSet_t *cset;
RF_AutoConfig_t *ac;
{
RF_ComponentLabel_t *clabel1, *clabel2;
/* If this one matches the *first* one in the set, that's good
enough, since the other members of the set would have been
through here too... */
/* note that we are not checking partitionSize here..
Note that we are also not checking the mod_counters here.
If everything else matches execpt the mod_counter, that's
good enough for this test. We will deal with the mod_counters
a little later in the autoconfiguration process.
(clabel1->mod_counter == clabel2->mod_counter) &&
The reason we don't check for this is that failed disks
will have lower modification counts. If those disks are
not added to the set they used to belong to, then they will
form their own set, which may result in 2 different sets,
for example, competing to be configured at raid0, and
perhaps competing to be the root filesystem set. If the
wrong ones get configured, or both attempt to become /,
weird behaviour and or serious lossage will occur. Thus we
need to bring them into the fold here, and kick them out at
a later point.
*/
clabel1 = cset->ac->clabel;
clabel2 = ac->clabel;
if ((clabel1->version == clabel2->version) &&
(clabel1->serial_number == clabel2->serial_number) &&
(clabel1->num_rows == clabel2->num_rows) &&
(clabel1->num_columns == clabel2->num_columns) &&
(clabel1->sectPerSU == clabel2->sectPerSU) &&
(clabel1->SUsPerPU == clabel2->SUsPerPU) &&
(clabel1->SUsPerRU == clabel2->SUsPerRU) &&
(clabel1->parityConfig == clabel2->parityConfig) &&
(clabel1->maxOutstanding == clabel2->maxOutstanding) &&
(clabel1->blockSize == clabel2->blockSize) &&
(clabel1->numBlocks == clabel2->numBlocks) &&
(clabel1->autoconfigure == clabel2->autoconfigure) &&
(clabel1->root_partition == clabel2->root_partition) &&
(clabel1->last_unit == clabel2->last_unit) &&
(clabel1->config_order == clabel2->config_order)) {
/* if it get's here, it almost *has* to be a match */
} else {
/* it's not consistent with somebody in the set..
punt */
return(0);
}
/* all was fine.. it must fit... */
return(1);
}
int
rf_have_enough_components(cset)
RF_ConfigSet_t *cset;
{
RF_AutoConfig_t *ac;
RF_AutoConfig_t *auto_config;
RF_ComponentLabel_t *clabel;
int r,c;
int num_rows;
int num_cols;
int num_missing;
int mod_counter;
int mod_counter_found;
int even_pair_failed;
char parity_type;
/* check to see that we have enough 'live' components
of this set. If so, we can configure it if necessary */
num_rows = cset->ac->clabel->num_rows;
num_cols = cset->ac->clabel->num_columns;
parity_type = cset->ac->clabel->parityConfig;
/* XXX Check for duplicate components!?!?!? */
/* Determine what the mod_counter is supposed to be for this set. */
mod_counter_found = 0;
mod_counter = 0;
ac = cset->ac;
while(ac!=NULL) {
if (mod_counter_found==0) {
mod_counter = ac->clabel->mod_counter;
mod_counter_found = 1;
} else {
if (ac->clabel->mod_counter > mod_counter) {
mod_counter = ac->clabel->mod_counter;
}
}
ac = ac->next;
}
num_missing = 0;
auto_config = cset->ac;
for(r=0; r<num_rows; r++) {
even_pair_failed = 0;
for(c=0; c<num_cols; c++) {
ac = auto_config;
while(ac!=NULL) {
if ((ac->clabel->row == r) &&
(ac->clabel->column == c) &&
(ac->clabel->mod_counter == mod_counter)) {
/* it's this one... */
rf_printf(1, "Found: %s at %d,%d\n",
ac->devname,r,c);
break;
}
ac=ac->next;
}
if (ac==NULL) {
/* Didn't find one here! */
/* special case for RAID 1, especially
where there are more than 2
components (where RAIDframe treats
things a little differently :( ) */
if (parity_type == '1') {
if (c%2 == 0) { /* even component */
even_pair_failed = 1;
} else { /* odd component. If
we're failed, and
so is the even
component, it's
"Good Night, Charlie" */
if (even_pair_failed == 1) {
return(0);
}
}
} else {
/* normal accounting */
num_missing++;
}
}
if ((parity_type == '1') && (c%2 == 1)) {
/* Just did an even component, and we didn't
bail.. reset the even_pair_failed flag,
and go on to the next component.... */
even_pair_failed = 0;
}
}
}
clabel = cset->ac->clabel;
if (((clabel->parityConfig == '0') && (num_missing > 0)) ||
((clabel->parityConfig == '4') && (num_missing > 1)) ||
((clabel->parityConfig == '5') && (num_missing > 1))) {
/* XXX this needs to be made *much* more general */
/* Too many failures */
return(0);
}
/* otherwise, all is well, and we've got enough to take a kick
at autoconfiguring this set */
return(1);
}
void
rf_create_configuration(ac,config,raidPtr)
RF_AutoConfig_t *ac;
RF_Config_t *config;
RF_Raid_t *raidPtr;
{
RF_ComponentLabel_t *clabel;
int i;
clabel = ac->clabel;
/* 1. Fill in the common stuff */
config->numRow = clabel->num_rows;
config->numCol = clabel->num_columns;
config->numSpare = 0; /* XXX should this be set here? */
config->sectPerSU = clabel->sectPerSU;
config->SUsPerPU = clabel->SUsPerPU;
config->SUsPerRU = clabel->SUsPerRU;
config->parityConfig = clabel->parityConfig;
/* XXX... */
strcpy(config->diskQueueType,"fifo");
config->maxOutstandingDiskReqs = clabel->maxOutstanding;
config->layoutSpecificSize = 0; /* XXX ? */
while(ac!=NULL) {
/* row/col values will be in range due to the checks
in reasonable_label() */
strcpy(config->devnames[ac->clabel->row][ac->clabel->column],
ac->devname);
ac = ac->next;
}
for(i=0;i<RF_MAXDBGV;i++) {
config->debugVars[i][0] = NULL;
}
}
int
rf_set_autoconfig(raidPtr, new_value)
RF_Raid_t *raidPtr;
int new_value;
{
RF_ComponentLabel_t *clabel;
struct vnode *vp;
dev_t dev;
int row, column;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_RAIDFRAME, M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidPtr->autoconfigure = new_value;
for(row=0; row<raidPtr->numRow; row++) {
for(column=0; column<raidPtr->numCol; column++) {
if (raidPtr->Disks[row][column].status ==
rf_ds_optimal) {
dev = raidPtr->Disks[row][column].dev;
vp = raidPtr->raid_cinfo[row][column].ci_vp;
raidread_component_label(dev, vp, clabel);
clabel->autoconfigure = new_value;
raidwrite_component_label(dev, vp, clabel);
}
}
}
FREE(clabel, M_RAIDFRAME);
return(new_value);
}
int
rf_set_rootpartition(raidPtr, new_value)
RF_Raid_t *raidPtr;
int new_value;
{
RF_ComponentLabel_t *clabel;
struct vnode *vp;
dev_t dev;
int row, column;
MALLOC(clabel, RF_ComponentLabel_t *, sizeof(RF_ComponentLabel_t),
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_RAIDFRAME, M_WAITOK | M_ZERO);
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidPtr->root_partition = new_value;
for(row=0; row<raidPtr->numRow; row++) {
for(column=0; column<raidPtr->numCol; column++) {
if (raidPtr->Disks[row][column].status ==
rf_ds_optimal) {
dev = raidPtr->Disks[row][column].dev;
vp = raidPtr->raid_cinfo[row][column].ci_vp;
raidread_component_label(dev, vp, clabel);
clabel->root_partition = new_value;
raidwrite_component_label(dev, vp, clabel);
}
}
}
FREE(clabel, M_RAIDFRAME);
return(new_value);
}
void
rf_release_all_vps(cset)
RF_ConfigSet_t *cset;
{
RF_AutoConfig_t *ac;
struct thread *td;
td = curthread;
ac = cset->ac;
while(ac!=NULL) {
/* Close the vp, and give it back */
if (ac->vp) {
VOP_CLOSE(ac->vp, FREAD, td->td_ucred, td);
vrele(ac->vp);
ac->vp = NULL;
}
ac = ac->next;
}
}
void
rf_cleanup_config_set(cset)
RF_ConfigSet_t *cset;
{
RF_AutoConfig_t *ac;
RF_AutoConfig_t *next_ac;
ac = cset->ac;
while(ac!=NULL) {
next_ac = ac->next;
/* nuke the label */
free(ac->clabel, M_RAIDFRAME);
/* cleanup the config structure */
free(ac, M_RAIDFRAME);
/* "next.." */
ac = next_ac;
}
/* and, finally, nuke the config set */
free(cset, M_RAIDFRAME);
}
void
raid_init_component_label(raidPtr, clabel)
RF_Raid_t *raidPtr;
RF_ComponentLabel_t *clabel;
{
/* current version number */
clabel->version = RF_COMPONENT_LABEL_VERSION;
clabel->serial_number = raidPtr->serial_number;
clabel->mod_counter = raidPtr->mod_counter;
clabel->num_rows = raidPtr->numRow;
clabel->num_columns = raidPtr->numCol;
clabel->clean = RF_RAID_DIRTY; /* not clean */
clabel->status = rf_ds_optimal; /* "It's good!" */
clabel->sectPerSU = raidPtr->Layout.sectorsPerStripeUnit;
clabel->SUsPerPU = raidPtr->Layout.SUsPerPU;
clabel->SUsPerRU = raidPtr->Layout.SUsPerRU;
clabel->blockSize = raidPtr->bytesPerSector;
clabel->numBlocks = raidPtr->sectorsPerDisk;
/* XXX not portable */
clabel->parityConfig = raidPtr->Layout.map->parityConfig;
clabel->maxOutstanding = raidPtr->maxOutstanding;
clabel->autoconfigure = raidPtr->autoconfigure;
clabel->root_partition = raidPtr->root_partition;
clabel->last_unit = raidPtr->raidid;
clabel->config_order = raidPtr->config_order;
}
int
rf_auto_config_set(cset, unit, parent_sc)
RF_ConfigSet_t *cset;
int *unit;
struct raidctl_softc *parent_sc;
{
int retcode = 0;
RF_Raid_t *raidPtr;
RF_Config_t *config;
int raidID;
rf_printf(0, "RAIDframe autoconfigure\n");
*unit = -1;
/* 1. Create a config structure */
config = (RF_Config_t *)malloc(sizeof(RF_Config_t), M_RAIDFRAME,
M_NOWAIT|M_ZERO);
if (config==NULL) {
rf_printf(0, "Out of mem at rf_auto_config_set\n");
/* XXX do something more intelligent here. */
return(1);
}
/* XXX raidID needs to be set correctly.. */
/*
2. Figure out what RAID ID this one is supposed to live at
See if we can get the same RAID dev that it was configured
on last time..
*/
raidID = cset->ac->clabel->last_unit;
if (raidID < 0) {
/* let's not wander off into lala land. */
raidID = raidgetunit(parent_sc, 0);
} else {
raidID = raidgetunit(parent_sc, raidID);
}
if (raidID < 0) {
/* punt... */
rf_printf(0, "Unable to auto configure this set!\n");
rf_printf(1, "Out of RAID devs!\n");
return(1);
}
rf_printf(0, "Configuring raid%d:\n",raidID);
RF_Malloc(raidPtr, sizeof(*raidPtr), (RF_Raid_t *));
if (raidPtr == NULL) {
rf_printf(0, "Out of mem at rf_auto_config_set\n");
return (1);
}
bzero((char *)raidPtr, sizeof(RF_Raid_t));
/* XXX all this stuff should be done SOMEWHERE ELSE! */
raidPtr->raidid = raidID;
raidPtr->openings = RAIDOUTSTANDING;
/* 3. Build the configuration structure */
rf_create_configuration(cset->ac, config, raidPtr);
/* 4. Do the configuration */
retcode = rf_Configure(raidPtr, config, cset->ac);
if (retcode == 0) {
parent_sc->sc_raiddevs[raidID] = raidinit(raidPtr);
if (parent_sc->sc_raiddevs[raidID] == NULL) {
rf_printf(0, "Could not create RAID device\n");
RF_Free(raidPtr, sizeof(RF_Raid_t));
free(config, M_RAIDFRAME);
return (1);
}
parent_sc->sc_numraid++;
((struct raid_softc *)raidPtr->sc)->sc_parent_dev =
parent_sc->sc_dev;
rf_markalldirty(raidPtr);
raidPtr->autoconfigure = 1; /* XXX do this here? */
if (cset->ac->clabel->root_partition==1) {
/* everything configured just fine. Make a note
that this set is eligible to be root. */
cset->rootable = 1;
/* XXX do this here? */
raidPtr->root_partition = 1;
}
}
/* 5. Cleanup */
free(config, M_RAIDFRAME);
*unit = raidID;
return(retcode);
}
void
rf_disk_unbusy(desc)
RF_RaidAccessDesc_t *desc;
{
struct raid_softc *sc;
struct bio *bp;
sc = desc->raidPtr->sc;
bp = (struct bio *)desc->bp;
}
/*
* Get the next available unit number from the bitmap. You can also request
* a particular unit number by passing it in the second arg. If it's not
* available, then grab the next free one. Return -1 if none are available.
*/
static int
raidgetunit(struct raidctl_softc *parent_sc, int id)
{
int i;
if (id >= RF_MAX_ARRAYS)
return (-1);
for (i = id; i < RF_MAX_ARRAYS; i++) {
if (parent_sc->sc_raiddevs[i] == NULL)
return (i);
}
if (id != 0) {
for (i = 0; i < id; i++) {
if (parent_sc->sc_raiddevs[i] == NULL)
return (i);
}
}
return (-1);
}
static int
raidshutdown(void)
{
struct raidctl_softc *parent_sc;
int i, error = 0;
parent_sc = raidctl_dev->si_drv1;
if (parent_sc->sc_numraid != 0) {
#if XXX_KTHREAD_EXIT_RACE
return (EBUSY);
#else
for (i = 0; i < RF_MAX_ARRAYS; i++) {
if (parent_sc->sc_raiddevs[i] != NULL) {
rf_printf(0, "Shutting down raid%d\n", i);
error = raidctlioctl(raidctl_dev,
RAIDFRAME_SHUTDOWN, (caddr_t)&i, 0, NULL);
if (error)
return (error);
if (parent_sc->sc_numraid == 0)
break;
}
}
#endif
}
destroy_dev(raidctl_dev);
return (error);
}
int
raid_getcomponentsize(RF_Raid_t *raidPtr, RF_RowCol_t row, RF_RowCol_t col)
{
struct vnode *vp;
struct vattr va;
RF_Thread_t td;
Play nice with GEOM and use the appropriate ioctls for getting the partition size and sector size. The old way of groveling through the disklabel doesn't work anymore. Noticed by: anholt Approved by: re
2002-12-10 15:52:56 +00:00
off_t mediasize;
u_int secsize;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
int retcode;
td = raidPtr->engine_thread;
retcode = raidlookup(raidPtr->Disks[row][col].devname, td, &vp);
if (retcode) {
printf("raid%d: rebuilding: raidlookup on device: %s failed: %d!\n",raidPtr->raidid,
raidPtr->Disks[row][col].devname, retcode);
/* XXX the component isn't responding properly...
must be still dead :-( */
raidPtr->reconInProgress--;
return(retcode);
} else {
/* Ok, so we can at least do a lookup...
How about actually getting a vp for it? */
if ((retcode = VOP_GETATTR(vp, &va, rf_getucred(td),
td)) != 0) {
raidPtr->reconInProgress--;
return(retcode);
}
Play nice with GEOM and use the appropriate ioctls for getting the partition size and sector size. The old way of groveling through the disklabel doesn't work anymore. Noticed by: anholt Approved by: re
2002-12-10 15:52:56 +00:00
retcode = VOP_IOCTL(vp, DIOCGSECTORSIZE, (caddr_t)&secsize,
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
FREAD, rf_getucred(td), td);
Play nice with GEOM and use the appropriate ioctls for getting the partition size and sector size. The old way of groveling through the disklabel doesn't work anymore. Noticed by: anholt Approved by: re
2002-12-10 15:52:56 +00:00
if (retcode)
return (retcode);
raidPtr->Disks[row][col].blockSize = secsize;
retcode = VOP_IOCTL(vp, DIOCGMEDIASIZE, (caddr_t)&mediasize,
FREAD, rf_getucred(td), td);
if (retcode)
return (retcode);
raidPtr->Disks[row][col].numBlocks = mediasize / secsize;
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
raidPtr->raid_cinfo[row][col].ci_vp = vp;
raidPtr->raid_cinfo[row][col].ci_dev = udev2dev(va.va_rdev, 0);
raidPtr->Disks[row][col].dev = udev2dev(va.va_rdev, 0);
/* we allow the user to specify that only a
fraction of the disks should be used this is
just for debug: it speeds up
* the parity scan */
raidPtr->Disks[row][col].numBlocks =
raidPtr->Disks[row][col].numBlocks *
rf_sizePercentage / 100;
}
return(retcode);
}
static int
raid_modevent(mod, type, data)
module_t mod;
int type;
void *data;
{
int error = 0;
switch (type) {
case MOD_LOAD:
raidattach();
break;
case MOD_UNLOAD:
case MOD_SHUTDOWN:
error = raidshutdown();
break;
default:
break;
}
return (error);
}
moduledata_t raid_mod = {
"raidframe",
(modeventhand_t) raid_modevent,
0};
DECLARE_MODULE(raidframe, raid_mod, SI_SUB_RAID, SI_ORDER_MIDDLE);
Reference in New Issue Copy Permalink