d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d13fc9954b
freebsd-nq/sys/x86/isa/atrtc.c

405 lines
10 KiB
C
Raw Normal View History

Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
/*-
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
* Copyright (c) 2008 Poul-Henning Kamp
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
* Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
* $FreeBSD$
Print the clock calibration messages all on one (long) line again so that they are easy to grep for. Removed now-unused i586 counter variables. Fixed some style bugs.
1996-10-25 13:46:21 +00:00
*/
Use __FBSDID().
2003-06-02 16:32:55 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Don't include <isa/isavar.h> or compile code depending on it when isa is not configured. Including <isa/isavar.h> when it is not used is harmful as well as bogus, since it includes "isa_if.h" which is not generated when isa is not configured. This was fixed in 1999 but was broken by unconditionalizing PNPBIOS.
2002-01-30 12:41:12 +00:00
#include "opt_isa.h"
Convert DDB to new-style option.
1996-01-04 21:13:23 +00:00
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Add PnP probe methods to some common AT hardware drivers. In each case, the PnP probe is merely a stub as we make assumptions about some of this hardware before we have probed it. Since these devices (with the exception of the speaker) are 'standard', suppress output in the !bootverbose case to clean up the probe messages somewhat.
2000-06-23 07:44:33 +00:00
#include <sys/bus.h>
First part of a little cleanup in the calendar/timezone/RTC handling. Move relevant variables to <sys/clock.h> and fix #includes as necessary. Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
#include <sys/clock.h>
Catch up to header include changes: - <sys/mutex.h> now requires <sys/systm.h> - <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
#include <sys/lock.h>
- machine/mutex.h -> sys/mutex.h - machine/ipl.h -> sys/ipl.h - Use MUTEX_DECLARE() for clock_lock
2000-10-20 07:31:00 +00:00
#include <sys/mutex.h>
Use critical_enter/critical_exit around the time sensitive part of this code to depessimize the worst case we've lived with silently and uneventfully for the past 12 years. Add a comment about a refinement for those needing more assurance of accuracy. Fix ddb's show rtc command deadlock potential when debugging rtc code by not taking the lock if we're in the debugger. If you need a thumb to count the number of people that have encountered this, I'd be surprised. Submitted by: bde
2013-02-21 15:35:48 +00:00
#include <sys/kdb.h>
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/kernel.h>
Add some missing <sys/module.h> includes which are masked by the one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
#include <sys/module.h>
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
#include <sys/proc.h>
#include <sys/rman.h>
#include <sys/timeet.h>
Added calibration the i8254 and the i586 clocks agains the RTC at boot time. The results are currently ignored unless certain temporary options are used. Added sysctls to support reading and writing the clock frequency variables (not the frequencies themselves). Writing is supposed to atomically adjust all related variables. machdep.c: Fixed spelling of a function name in a comment so that I can log this message which should have been with the previous commit. Initialize `cpu_class' earlier so that it can be used in startrtclock() instead of in calibrate_cyclecounter() (which no longer exists). Removed range checking of `cpu'. It is always initialized to CPU_XXX so it is less likely to be out of bounds than most variables. clock.h: Removed I586_CYCLECTR(). Use rdtsc() instead. clock.c: TIMER_FREQ is now a variable timer_freq that defaults to the old value of TIMER_FREQ. #define'ing TIMER_FREQ should still work and may be the best way of setting the frequency. Calibration involves counting cycles while watching the RTC for one second. This gives values correct to within (a few ppm) + (the innaccuracy of the RTC) on my systems.
1996-05-01 08:39:02 +00:00
Remove fd driver from its old home and change files which include rtc.h to account for its new location.
1999-05-31 18:36:14 +00:00
#include <isa/rtc.h>
Don't include <isa/isavar.h> or compile code depending on it when isa is not configured. Including <isa/isavar.h> when it is not used is harmful as well as bogus, since it includes "isa_if.h" which is not generated when isa is not configured. This was fixed in 1999 but was broken by unconditionalizing PNPBIOS.
2002-01-30 12:41:12 +00:00
#ifdef DEV_ISA
- Move timerreg.h to <arch>/include and split i8253 specific defines into i8253reg.h, and add some defines to control a speaker. - Move PPI related defines from i386/isa/spkr.c into ppireg.h and use them. - Move IO_{PPI,TIMER} defines into ppireg.h and timerreg.h respectively. - Use isa/isareg.h rather than <arch>/isa/isa.h. Tested on: i386, pc98
2005-05-14 09:10:02 +00:00
#include <isa/isareg.h>
Add PnP probe methods to some common AT hardware drivers. In each case, the PnP probe is merely a stub as we make assumptions about some of this hardware before we have probed it. Since these devices (with the exception of the speaker) are 'standard', suppress output in the !bootverbose case to clean up the probe messages somewhat.
2000-06-23 07:44:33 +00:00
#include <isa/isavar.h>
Don't include <isa/isavar.h> or compile code depending on it when isa is not configured. Including <isa/isavar.h> when it is not used is harmful as well as bogus, since it includes "isa_if.h" which is not generated when isa is not configured. This was fixed in 1999 but was broken by unconditionalizing PNPBIOS.
2002-01-30 12:41:12 +00:00
#endif
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
#include <machine/intr_machdep.h>
#include "clock_if.h"
Remove some unnecessary #includes. Restore the simple leap year calculation as a macro and document it so that it doesn't become complicated again. The simple version works for all leap years covered by 32-bit time_t's. The complicated version doesn't work for all leap years covered by 64-bit time_t's since among other reasons, the solar system is not stable for long enough. Fix declarations. Nuke spinwait().
1994-09-18 23:08:56 +00:00
Use critical_enter/critical_exit around the time sensitive part of this code to depessimize the worst case we've lived with silently and uneventfully for the past 12 years. Add a comment about a refinement for those needing more assurance of accuracy. Fix ddb's show rtc command deadlock potential when debugging rtc code by not taking the lock if we're in the debugger. If you need a thumb to count the number of people that have encountered this, I'd be surprised. Submitted by: bde
2013-02-21 15:35:48 +00:00
#define RTC_LOCK do { if (!kdb_active) mtx_lock_spin(&clock_lock); } while (0)
#define RTC_UNLOCK do { if (!kdb_active) mtx_unlock_spin(&clock_lock); } while (0)
Maintain a new variable `timer0_overflow_threshold' so that microtime() doesn't have to calculate it every call. Rename `timer0_prescale' to `timer0_prescaler_count' and maintain it correctly. Previously we lost a few 8253 cycles for every "prescaled" clock interrupt, and the lossage grows rapidly at 16 KHz. Now we only lose a few cycles for every standard clock interrupt. Rename `*_divisor' to `*_max_count'. Do the calculation of TIMER_DIV(rate) only once instead of 3 times each time the rate is changed. Don't allow preposterously large interrupt rates. Bug fixes elsewhere should allow the system to survive rates that saturate the system, however. Clean up declarations. Include <machine/clock.h> to check our own declarations.
1994-11-05 23:55:07 +00:00
Fix i386 LINT build broken by r209371. There appeared such legacy thing as APM, that somehow breaking RTC.
2010-06-21 19:53:47 +00:00
int atrtcclock_disable = 0;
Optimized RTC accesses by avoiding null writes to the index register and by only delaying when an RTC register is written to. The delay after writing to the data register is now not just a workaround. This reduces the number of ISA accesses in the usual case from 4 to 1. The usual case is 2 rtcin()'s for each RTC interrupt. The index register is almost always RTC_INTR for this. The 3 extra ISA accesses were 1 for writing the index and 2 for delays. Some delays are needed in theory, but in practice they now just slow down slow accesses some more since almost eveyone including us does them wrong so modern systems enforce sufficient delays in hardware. I used to have the delays ifdefed out, but with the index register optimization the delays are rarely executed so the old magic ones can be kept or even implemented non- magically without significant cost. Optimizing RTC interrupt handling is more interesting than it used to be because RTC interrupts are currently needed to fix the more efficient apic timer interrupts on some systems. apic_timer_hz is normally 2000 so the RTC interrupt rate needs to be 2048 to keep the apic timer firing on such systems. Without these changes, each RTC interrupt normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC accesses). Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz takes 2-3% of a CPU. Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
static int rtc_reg = -1;
Maintain a new variable `timer0_overflow_threshold' so that microtime() doesn't have to calculate it every call. Rename `timer0_prescale' to `timer0_prescaler_count' and maintain it correctly. Previously we lost a few 8253 cycles for every "prescaled" clock interrupt, and the lossage grows rapidly at 16 KHz. Now we only lose a few cycles for every standard clock interrupt. Rename `*_divisor' to `*_max_count'. Do the calculation of TIMER_DIV(rate) only once instead of 3 times each time the rate is changed. Don't allow preposterously large interrupt rates. Bug fixes elsewhere should allow the system to survive rates that saturate the system, however. Clean up declarations. Include <machine/clock.h> to check our own declarations.
1994-11-05 23:55:07 +00:00
static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
- Don't enable periodic interrupts from the RTC by default in rtc_statusb. Instead, explicitly enable them when we setup the interrupt handler. Also, move the setting of stathz and profhz down to the same place so that the code flow is simpler and easier to follow. - Don't setup an interrupt handler for IRQ0 if we are using the lapic timer as it doesn't do anything productive in that case.
2005-03-24 21:34:16 +00:00
static u_char rtc_statusb = RTCSB_24HR;
Major cleanup of the timerX_{acquire,release} stuff. In particular, make it more intelligible, improve the partially bogus locking, and allow for a ``quick re-acquiration'' from a pending release of timer 0 that happened ``recently'', so it was not processed yet by clkintr(). This latter modification now finally allows to play XBoing over pcaudio without losing sounds or getting complaints. ;-) (XBoing opens/writes/closes the sound device all over the day.) Correct locking for sysbeep(). Extensively (:-) reviewed by: bde
1996-07-20 18:47:23 +00:00
resettodr() implemented, inittodr() fixed Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
/*
* RTC support routines
*/
Moved rtcin() to clock.c. Always delay using one inb(0x84) after each i/o in rtcin() - don't do this conditional on the bogus option DUMMY_NOPS not being defined. If you want an optionally slightly faster rtcin() again, then inline it and use a better named option or sysctl variable. It only needs to be fast in rtcintr().
1996-03-31 04:05:36 +00:00
int
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
rtcin(int reg)
Moved rtcin() to clock.c. Always delay using one inb(0x84) after each i/o in rtcin() - don't do this conditional on the bogus option DUMMY_NOPS not being defined. If you want an optionally slightly faster rtcin() again, then inline it and use a better named option or sysctl variable. It only needs to be fast in rtcintr().
1996-03-31 04:05:36 +00:00
{
u_char val;
Replace spl protection in rtcin() and writertc() with spinlocks using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00
RTC_LOCK;
Optimized RTC accesses by avoiding null writes to the index register and by only delaying when an RTC register is written to. The delay after writing to the data register is now not just a workaround. This reduces the number of ISA accesses in the usual case from 4 to 1. The usual case is 2 rtcin()'s for each RTC interrupt. The index register is almost always RTC_INTR for this. The 3 extra ISA accesses were 1 for writing the index and 2 for delays. Some delays are needed in theory, but in practice they now just slow down slow accesses some more since almost eveyone including us does them wrong so modern systems enforce sufficient delays in hardware. I used to have the delays ifdefed out, but with the index register optimization the delays are rarely executed so the old magic ones can be kept or even implemented non- magically without significant cost. Optimizing RTC interrupt handling is more interesting than it used to be because RTC interrupts are currently needed to fix the more efficient apic timer interrupts on some systems. apic_timer_hz is normally 2000 so the RTC interrupt rate needs to be 2048 to keep the apic timer firing on such systems. Without these changes, each RTC interrupt normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC accesses). Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz takes 2-3% of a CPU. Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
if (rtc_reg != reg) {
inb(0x84);
outb(IO_RTC, reg);
rtc_reg = reg;
inb(0x84);
}
Moved rtcin() to clock.c. Always delay using one inb(0x84) after each i/o in rtcin() - don't do this conditional on the bogus option DUMMY_NOPS not being defined. If you want an optionally slightly faster rtcin() again, then inline it and use a better named option or sysctl variable. It only needs to be fast in rtcintr().
1996-03-31 04:05:36 +00:00
val = inb(IO_RTC + 1);
Replace spl protection in rtcin() and writertc() with spinlocks using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00
RTC_UNLOCK;
Moved rtcin() to clock.c. Always delay using one inb(0x84) after each i/o in rtcin() - don't do this conditional on the bogus option DUMMY_NOPS not being defined. If you want an optionally slightly faster rtcin() again, then inline it and use a better named option or sysctl variable. It only needs to be fast in rtcintr().
1996-03-31 04:05:36 +00:00
return (val);
}
Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not refactored it to be a generic device. Instead of being part of the standard kernel, there is now a 'nvram' device for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off with 'nodevice nvram'. This matches the previous behavior when it was first committed.
2007-10-26 03:23:54 +00:00
void
Optimized RTC accesses by avoiding null writes to the index register and by only delaying when an RTC register is written to. The delay after writing to the data register is now not just a workaround. This reduces the number of ISA accesses in the usual case from 4 to 1. The usual case is 2 rtcin()'s for each RTC interrupt. The index register is almost always RTC_INTR for this. The 3 extra ISA accesses were 1 for writing the index and 2 for delays. Some delays are needed in theory, but in practice they now just slow down slow accesses some more since almost eveyone including us does them wrong so modern systems enforce sufficient delays in hardware. I used to have the delays ifdefed out, but with the index register optimization the delays are rarely executed so the old magic ones can be kept or even implemented non- magically without significant cost. Optimizing RTC interrupt handling is more interesting than it used to be because RTC interrupts are currently needed to fix the more efficient apic timer interrupts on some systems. apic_timer_hz is normally 2000 so the RTC interrupt rate needs to be 2048 to keep the apic timer firing on such systems. Without these changes, each RTC interrupt normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC accesses). Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz takes 2-3% of a CPU. Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
writertc(int reg, u_char val)
resettodr() implemented, inittodr() fixed Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
{
Fixed races accessing the RTC. The races apparently caused apm_default_resume() to sometimes set a very wrong time. (1) Accesses to the RTC index and data registers were not atomic enough. Interrupts were not masked. This was only good enough until an interrupt handler (rtcintr()) started accessing the RTC in FreeBSD-2.0. (2) Access to the block of time registers in inittodr() was not atomic enough. inittodr() has 244us to read the time registers. Interrupts were not masked. This was only good enough until something (apm) started calling inittodr() after boot time in FreeBSD-2.0. The fix for (2) also makes the timecounter update more atomic, although this is currently unimportant due to the low resolution of the RTC. Problem reported by: mckay
1999-12-25 15:30:31 +00:00
Replace spl protection in rtcin() and writertc() with spinlocks using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00
RTC_LOCK;
Optimized RTC accesses by avoiding null writes to the index register and by only delaying when an RTC register is written to. The delay after writing to the data register is now not just a workaround. This reduces the number of ISA accesses in the usual case from 4 to 1. The usual case is 2 rtcin()'s for each RTC interrupt. The index register is almost always RTC_INTR for this. The 3 extra ISA accesses were 1 for writing the index and 2 for delays. Some delays are needed in theory, but in practice they now just slow down slow accesses some more since almost eveyone including us does them wrong so modern systems enforce sufficient delays in hardware. I used to have the delays ifdefed out, but with the index register optimization the delays are rarely executed so the old magic ones can be kept or even implemented non- magically without significant cost. Optimizing RTC interrupt handling is more interesting than it used to be because RTC interrupts are currently needed to fix the more efficient apic timer interrupts on some systems. apic_timer_hz is normally 2000 so the RTC interrupt rate needs to be 2048 to keep the apic timer firing on such systems. Without these changes, each RTC interrupt normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC accesses). Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz takes 2-3% of a CPU. Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
if (rtc_reg != reg) {
inb(0x84);
outb(IO_RTC, reg);
rtc_reg = reg;
inb(0x84);
}
icu.s: Move definition of `stat_imask' to clock.c. clock.c: Rename `rtcmask' to `stat_imask' and export it. Rename `clkmask' to `clk_imask' for consistency. Only calculate TIMER_DIV(hz) once. Merge debugging and "garbage" code to produce debugging code and format the output better. Make writertc() static inline and use it everywhere. Now all accesses to the clock registers go through rtcin() and writertc(). Move rtc initialization to cpu_initclocks(). Merge enablertclock() with cpu_initclocks() and remove enablertclock(). The extra entry point was just a leftover from 1.1.5.
1994-12-30 12:43:35 +00:00
outb(IO_RTC + 1, val);
Optimized RTC accesses by avoiding null writes to the index register and by only delaying when an RTC register is written to. The delay after writing to the data register is now not just a workaround. This reduces the number of ISA accesses in the usual case from 4 to 1. The usual case is 2 rtcin()'s for each RTC interrupt. The index register is almost always RTC_INTR for this. The 3 extra ISA accesses were 1 for writing the index and 2 for delays. Some delays are needed in theory, but in practice they now just slow down slow accesses some more since almost eveyone including us does them wrong so modern systems enforce sufficient delays in hardware. I used to have the delays ifdefed out, but with the index register optimization the delays are rarely executed so the old magic ones can be kept or even implemented non- magically without significant cost. Optimizing RTC interrupt handling is more interesting than it used to be because RTC interrupts are currently needed to fix the more efficient apic timer interrupts on some systems. apic_timer_hz is normally 2000 so the RTC interrupt rate needs to be 2048 to keep the apic timer firing on such systems. Without these changes, each RTC interrupt normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC accesses). Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz takes 2-3% of a CPU. Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
inb(0x84);
Replace spl protection in rtcin() and writertc() with spinlocks using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00
RTC_UNLOCK;
resettodr() implemented, inittodr() fixed Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
}
My wife is busy making me a new conical hat, so you don't need to send any to me this time. Commited an old copy of this files where the tables were swapped. Duh!.
1996-01-15 21:26:43 +00:00
static __inline int
resettodr() implemented, inittodr() fixed Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
readrtc(int port)
{
My wife is busy making me a new conical hat, so you don't need to send any to me this time. Commited an old copy of this files where the tables were swapped. Duh!.
1996-01-15 21:26:43 +00:00
return(bcd2bin(rtcin(port)));
resettodr() implemented, inittodr() fixed Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
atrtc_start(void)
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
{
Added calibration the i8254 and the i586 clocks agains the RTC at boot time. The results are currently ignored unless certain temporary options are used. Added sysctls to support reading and writing the clock frequency variables (not the frequencies themselves). Writing is supposed to atomically adjust all related variables. machdep.c: Fixed spelling of a function name in a comment so that I can log this message which should have been with the previous commit. Initialize `cpu_class' earlier so that it can be used in startrtclock() instead of in calibrate_cyclecounter() (which no longer exists). Removed range checking of `cpu'. It is always initialized to CPU_XXX so it is less likely to be out of bounds than most variables. clock.h: Removed I586_CYCLECTR(). Use rdtsc() instead. clock.c: TIMER_FREQ is now a variable timer_freq that defaults to the old value of TIMER_FREQ. #define'ing TIMER_FREQ should still work and may be the best way of setting the frequency. Calibration involves counting cycles while watching the RTC for one second. This gives values correct to within (a few ppm) + (the innaccuracy of the RTC) on my systems.
1996-05-01 08:39:02 +00:00
writertc(RTC_STATUSA, rtc_statusa);
writertc(RTC_STATUSB, RTCSB_24HR);
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
atrtc_rate(unsigned rate)
Initial import, 0.1 + pk 0.2.4-B1
1993-06-12 14:58:17 +00:00
{
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
rtc_statusa = RTCSA_DIVIDER | rate;
icu.s: Move definition of `stat_imask' to clock.c. clock.c: Rename `rtcmask' to `stat_imask' and export it. Rename `clkmask' to `clk_imask' for consistency. Only calculate TIMER_DIV(hz) once. Merge debugging and "garbage" code to produce debugging code and format the output better. Make writertc() static inline and use it everywhere. Now all accesses to the clock registers go through rtcin() and writertc(). Move rtc initialization to cpu_initclocks(). Merge enablertclock() with cpu_initclocks() and remove enablertclock(). The extra entry point was just a leftover from 1.1.5.
1994-12-30 12:43:35 +00:00
writertc(RTC_STATUSA, rtc_statusa);
On SMP systems, initially follow the MP spec with regard to which pin on the IOAPIC being connected to the 8254 timer interrupt. Verify that timer interrupts are delivered. If they aren't, attempt a fallback to mixed mode (i.e. routing the timer interrupt via the 8259 PIC).
1998-03-14 03:11:50 +00:00
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
atrtc_enable_intr(void)
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
{
Split statclock into statclock and profclock, and made the method for driving statclock based on profhz when profiling is enabled MD, since most platforms don't use this anyway. This removes the need for statclock_process, whose only purpose was to subdivide profhz, and gets the profiling clock running outside of sched_lock on platforms that implement suswintr. Also changed the interface for starting and stopping the profiling clock to do just that, instead of changing the rate of statclock, since they can now be separate. Reviewed by: jhb, tmm Tested on: i386, sparc64
2003-02-03 17:53:15 +00:00
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
rtc_statusb |= RTCSB_PINTR;
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
Split statclock into statclock and profclock, and made the method for driving statclock based on profhz when profiling is enabled MD, since most platforms don't use this anyway. This removes the need for statclock_process, whose only purpose was to subdivide profhz, and gets the profiling clock running outside of sched_lock on platforms that implement suswintr. Also changed the interface for starting and stopping the profiling clock to do just that, instead of changing the rate of statclock, since they can now be separate. Reviewed by: jhb, tmm Tested on: i386, sparc64
2003-02-03 17:53:15 +00:00
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc_disable_intr(void)
{
rtc_statusb &= ~RTCSB_PINTR;
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
}
Split statclock into statclock and profclock, and made the method for driving statclock based on profhz when profiling is enabled MD, since most platforms don't use this anyway. This removes the need for statclock_process, whose only purpose was to subdivide profhz, and gets the profiling clock running outside of sched_lock on platforms that implement suswintr. Also changed the interface for starting and stopping the profiling clock to do just that, instead of changing the rate of statclock, since they can now be separate. Reviewed by: jhb, tmm Tested on: i386, sparc64
2003-02-03 17:53:15 +00:00
void
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
atrtc_restore(void)
Split statclock into statclock and profclock, and made the method for driving statclock based on profhz when profiling is enabled MD, since most platforms don't use this anyway. This removes the need for statclock_process, whose only purpose was to subdivide profhz, and gets the profiling clock running outside of sched_lock on platforms that implement suswintr. Also changed the interface for starting and stopping the profiling clock to do just that, instead of changing the rate of statclock, since they can now be separate. Reviewed by: jhb, tmm Tested on: i386, sparc64
2003-02-03 17:53:15 +00:00
{
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
/* Restore all of the RTC's "status" (actually, control) registers. */
rtcin(RTC_STATUSA); /* dummy to get rtc_reg set */
writertc(RTC_STATUSB, RTCSB_24HR);
icu.s: Move definition of `stat_imask' to clock.c. clock.c: Rename `rtcmask' to `stat_imask' and export it. Rename `clkmask' to `clk_imask' for consistency. Only calculate TIMER_DIV(hz) once. Merge debugging and "garbage" code to produce debugging code and format the output better. Make writertc() static inline and use it everywhere. Now all accesses to the clock registers go through rtcin() and writertc(). Move rtc initialization to cpu_initclocks(). Merge enablertclock() with cpu_initclocks() and remove enablertclock(). The extra entry point was just a leftover from 1.1.5.
1994-12-30 12:43:35 +00:00
writertc(RTC_STATUSA, rtc_statusa);
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
Add PnP probe methods to some common AT hardware drivers. In each case, the PnP probe is merely a stub as we make assumptions about some of this hardware before we have probed it. Since these devices (with the exception of the speaker) are 'standard', suppress output in the !bootverbose case to clean up the probe messages somewhat.
2000-06-23 07:44:33 +00:00
}
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
/**********************************************************************
* RTC driver for subr_rtc
*/
struct atrtc_softc {
int port_rid, intr_rid;
struct resource *port_res;
struct resource *intr_res;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
void *intr_handler;
struct eventtimer et;
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
};
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static int
MFcalloutng: Switch eventtimers(9) from using struct bintime to sbintime_t. Even before this not a single driver really supported full dynamic range of struct bintime even in theory, not speaking about practical inexpediency. This change legitimates the status quo and cleans up the code.
2013-02-28 13:46:03 +00:00
rtc_start(struct eventtimer *et, sbintime_t first, sbintime_t period)
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
{
MFcalloutng: Switch eventtimers(9) from using struct bintime to sbintime_t. Even before this not a single driver really supported full dynamic range of struct bintime even in theory, not speaking about practical inexpediency. This change legitimates the status quo and cleans up the code.
2013-02-28 13:46:03 +00:00
atrtc_rate(max(fls(period + (period >> 1)) - 17, 1));
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
atrtc_enable_intr();
return (0);
}
static int
rtc_stop(struct eventtimer *et)
{
atrtc_disable_intr();
return (0);
}
/*
* This routine receives statistical clock interrupts from the RTC.
* As explained above, these occur at 128 interrupts per second.
* When profiling, we receive interrupts at a rate of 1024 Hz.
*
* This does not actually add as much overhead as it sounds, because
* when the statistical clock is active, the hardclock driver no longer
* needs to keep (inaccurate) statistics on its own. This decouples
* statistics gathering from scheduling interrupts.
*
* The RTC chip requires that we read status register C (RTC_INTR)
* to acknowledge an interrupt, before it will generate the next one.
* Under high interrupt load, rtcintr() can be indefinitely delayed and
* the clock can tick immediately after the read from RTC_INTR. In this
* case, the mc146818A interrupt signal will not drop for long enough
* to register with the 8259 PIC. If an interrupt is missed, the stat
* clock will halt, considerably degrading system performance. This is
* why we use 'while' rather than a more straightforward 'if' below.
* Stat clock ticks can still be lost, causing minor loss of accuracy
* in the statistics, but the stat clock will no longer stop.
*/
static int
rtc_intr(void *arg)
{
struct atrtc_softc *sc = (struct atrtc_softc *)arg;
int flag = 0;
while (rtcin(RTC_INTR) & RTCIR_PERIOD) {
flag = 1;
Rise knowledge about curthread->td_intr_frame by one step. Make timer callback argument really opaque. Not repeat interrupt handler's problem in case somebody will ever need to have both argument and frame.
2010-07-13 12:46:06 +00:00
if (sc->et.et_active)
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
}
return(flag ? FILTER_HANDLED : FILTER_STRAY);
}
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
/*
* Attach to the ISA PnP descriptors for the timer and realtime clock.
*/
static struct isa_pnp_id atrtc_ids[] = {
{ 0x000bd041 /* PNP0B00 */, "AT realtime clock" },
{ 0 }
};
static int
atrtc_probe(device_t dev)
{
int result;
result = ISA_PNP_PROBE(device_get_parent(dev), dev, atrtc_ids);
Allow attimer to be hinted at ISA if not reported by ISA PNP or ACPI. Rephrase respective atrtc code same way to be more readable.
2010-07-01 18:59:05 +00:00
/* ENOENT means no PnP-ID, device is hinted. */
if (result == ENOENT) {
device_set_desc(dev, "AT realtime clock");
return (BUS_PROBE_LOW_PRIORITY);
}
return (result);
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
}
static int
atrtc_attach(device_t dev)
{
struct atrtc_softc *sc;
Instead of deleting existing IRQ resource, which is not really working for ACPI bus, find wanted IRQ rid or spare one. This should fix panic during boot on systems reporting fancy IRQ numbers for attimer and atrtc.
2010-07-12 06:46:17 +00:00
u_long s;
atrtc: remove (pre-)historic check of RTC NVRAM at address 0x0e Old scrolls tell that once upon a time IBM AT BIOS was known to put some useful system diagnostic information into RTC NVRAM. It is not really known if and for how long PC BIOSes followed that convention, but I believe that many, if not all, modern BIOSes do not do that any more (not mentioning other types of x86 firmware). Some diagnostic bits don't even make any sense any longer. The check results in confusing messages upon boot on some systems. So I am removing it. Discussed with: bde, jhb, mav MFC after: 3 weeks
2010-10-16 10:45:36 +00:00
int i;
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
sc = device_get_softc(dev);
Small style fixes: - Avoid side-effect assignments in if statements when possible. - Don't use ! to check for NULL pointers, explicitly check against NULL. - Explicitly check error return values against 0. - Don't use INTR_MPSAFE for interrupt handlers with only filters as it is meaningless. - Remove unneeded function casts.
2010-12-16 17:05:28 +00:00
sc->port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &sc->port_rid,
IO_RTC, IO_RTC + 1, 2, RF_ACTIVE);
if (sc->port_res == NULL)
device_printf(dev, "Warning: Couldn't map I/O.\n");
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
atrtc_start();
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
clock_register(dev, 1000000);
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
bzero(&sc->et, sizeof(struct eventtimer));
Add "legacy route" support to HPET driver. When enabled, this mode makes HPET to steal IRQ0 from i8254 and IRQ8 from RTC timers. It can be suitable for HPETs without FSB interrupts support, as it gives them two unshared IRQs. It allows them to provide one per-CPU event timer on dual-CPU system, that should be suitable for further tickless kernels. To enable it, such lines may be added to /boot/loader.conf: hint.atrtc.0.clock=0 hint.attimer.0.clock=0 hint.hpet.0.legacy_route=1
2010-06-22 19:42:27 +00:00
if (!atrtcclock_disable &&
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
(resource_int_value(device_get_name(dev), device_get_unit(dev),
"clock", &i) != 0 || i != 0)) {
Rework r209456: Instead of using fake rid (which ISA doesn't like), delete untrusted IRQ resource and let it be recreated.
2010-07-01 18:51:18 +00:00
sc->intr_rid = 0;
Instead of deleting existing IRQ resource, which is not really working for ACPI bus, find wanted IRQ rid or spare one. This should fix panic during boot on systems reporting fancy IRQ numbers for attimer and atrtc.
2010-07-12 06:46:17 +00:00
while (bus_get_resource(dev, SYS_RES_IRQ, sc->intr_rid,
&s, NULL) == 0 && s != 8)
sc->intr_rid++;
Small style fixes: - Avoid side-effect assignments in if statements when possible. - Don't use ! to check for NULL pointers, explicitly check against NULL. - Explicitly check error return values against 0. - Don't use INTR_MPSAFE for interrupt handlers with only filters as it is meaningless. - Remove unneeded function casts.
2010-12-16 17:05:28 +00:00
sc->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->intr_rid, 8, 8, 1, RF_ACTIVE);
if (sc->intr_res == NULL) {
device_printf(dev, "Can't map interrupt.\n");
Add "legacy route" support to HPET driver. When enabled, this mode makes HPET to steal IRQ0 from i8254 and IRQ8 from RTC timers. It can be suitable for HPETs without FSB interrupts support, as it gives them two unshared IRQs. It allows them to provide one per-CPU event timer on dual-CPU system, that should be suitable for further tickless kernels. To enable it, such lines may be added to /boot/loader.conf: hint.atrtc.0.clock=0 hint.attimer.0.clock=0 hint.hpet.0.legacy_route=1
2010-06-22 19:42:27 +00:00
return (0);
Small style fixes: - Avoid side-effect assignments in if statements when possible. - Don't use ! to check for NULL pointers, explicitly check against NULL. - Explicitly check error return values against 0. - Don't use INTR_MPSAFE for interrupt handlers with only filters as it is meaningless. - Remove unneeded function casts.
2010-12-16 17:05:28 +00:00
} else if ((bus_setup_intr(dev, sc->intr_res, INTR_TYPE_CLK,
rtc_intr, NULL, sc, &sc->intr_handler))) {
Add "legacy route" support to HPET driver. When enabled, this mode makes HPET to steal IRQ0 from i8254 and IRQ8 from RTC timers. It can be suitable for HPETs without FSB interrupts support, as it gives them two unshared IRQs. It allows them to provide one per-CPU event timer on dual-CPU system, that should be suitable for further tickless kernels. To enable it, such lines may be added to /boot/loader.conf: hint.atrtc.0.clock=0 hint.attimer.0.clock=0 hint.hpet.0.legacy_route=1
2010-06-22 19:42:27 +00:00
device_printf(dev, "Can't setup interrupt.\n");
return (0);
} else {
/* Bind IRQ to BSP to avoid live migration. */
bus_bind_intr(dev, sc->intr_res, 0);
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_name = "RTC";
Extend timer driver API to report also minimal and maximal supported period lengths. Make MI wrapper code to validate periods in request. Make kernel clock management code to honor these hardware limitations while choosing hz, stathz and profhz values.
2010-07-20 10:58:56 +00:00
sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_POW2DIV;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_quality = 0;
sc->et.et_frequency = 32768;
MFcalloutng: Switch eventtimers(9) from using struct bintime to sbintime_t. Even before this not a single driver really supported full dynamic range of struct bintime even in theory, not speaking about practical inexpediency. This change legitimates the status quo and cleans up the code.
2013-02-28 13:46:03 +00:00
sc->et.et_min_period = 0x00080000;
sc->et.et_max_period = 0x80000000;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_start = rtc_start;
sc->et.et_stop = rtc_stop;
sc->et.et_priv = dev;
et_register(&sc->et);
}
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
return(0);
}
Add resume methods to i8254 and atrtc devices.
2009-05-01 21:43:04 +00:00
static int
atrtc_resume(device_t dev)
{
atrtc_restore();
return(0);
}
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
static int
atrtc_settime(device_t dev __unused, struct timespec *ts)
{
struct clocktime ct;
clock_ts_to_ct(ts, &ct);
/* Disable RTC updates and interrupts. */
writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
writertc(RTC_SEC, bin2bcd(ct.sec)); /* Write back Seconds */
writertc(RTC_MIN, bin2bcd(ct.min)); /* Write back Minutes */
writertc(RTC_HRS, bin2bcd(ct.hour)); /* Write back Hours */
writertc(RTC_WDAY, ct.dow + 1); /* Write back Weekday */
writertc(RTC_DAY, bin2bcd(ct.day)); /* Write back Day */
writertc(RTC_MONTH, bin2bcd(ct.mon)); /* Write back Month */
writertc(RTC_YEAR, bin2bcd(ct.year % 100)); /* Write back Year */
#ifdef USE_RTC_CENTURY
writertc(RTC_CENTURY, bin2bcd(ct.year / 100)); /* ... and Century */
#endif
/* Reenable RTC updates and interrupts. */
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
return (0);
}
static int
atrtc_gettime(device_t dev, struct timespec *ts)
{
struct clocktime ct;
/* Look if we have a RTC present and the time is valid */
if (!(rtcin(RTC_STATUSD) & RTCSD_PWR)) {
device_printf(dev, "WARNING: Battery failure indication\n");
return (EINVAL);
}
Use critical_enter/critical_exit around the time sensitive part of this code to depessimize the worst case we've lived with silently and uneventfully for the past 12 years. Add a comment about a refinement for those needing more assurance of accuracy. Fix ddb's show rtc command deadlock potential when debugging rtc code by not taking the lock if we're in the debugger. If you need a thumb to count the number of people that have encountered this, I'd be surprised. Submitted by: bde
2013-02-21 15:35:48 +00:00
/*
* wait for time update to complete
* If RTCSA_TUP is zero, we have at least 244us before next update.
* This is fast enough on most hardware, but a refinement would be
* to make sure that no more than 240us pass after we start reading,
* and try again if so.
*/
Fix broken usage of splhigh() by removing it.
2013-02-21 00:40:08 +00:00
while (rtcin(RTC_STATUSA) & RTCSA_TUP)
continue;
Use critical_enter/critical_exit around the time sensitive part of this code to depessimize the worst case we've lived with silently and uneventfully for the past 12 years. Add a comment about a refinement for those needing more assurance of accuracy. Fix ddb's show rtc command deadlock potential when debugging rtc code by not taking the lock if we're in the debugger. If you need a thumb to count the number of people that have encountered this, I'd be surprised. Submitted by: bde
2013-02-21 15:35:48 +00:00
critical_enter();
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
ct.nsec = 0;
ct.sec = readrtc(RTC_SEC);
ct.min = readrtc(RTC_MIN);
ct.hour = readrtc(RTC_HRS);
ct.day = readrtc(RTC_DAY);
ct.dow = readrtc(RTC_WDAY) - 1;
ct.mon = readrtc(RTC_MONTH);
ct.year = readrtc(RTC_YEAR);
#ifdef USE_RTC_CENTURY
ct.year += readrtc(RTC_CENTURY) * 100;
#else
ct.year += 2000;
#endif
Use critical_enter/critical_exit around the time sensitive part of this code to depessimize the worst case we've lived with silently and uneventfully for the past 12 years. Add a comment about a refinement for those needing more assurance of accuracy. Fix ddb's show rtc command deadlock potential when debugging rtc code by not taking the lock if we're in the debugger. If you need a thumb to count the number of people that have encountered this, I'd be surprised. Submitted by: bde
2013-02-21 15:35:48 +00:00
critical_exit();
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
/* Set dow = -1 because some clocks don't set it correctly. */
ct.dow = -1;
return (clock_ct_to_ts(&ct, ts));
}
static device_method_t atrtc_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, atrtc_probe),
DEVMETHOD(device_attach, atrtc_attach),
DEVMETHOD(device_detach, bus_generic_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
/* XXX stop statclock? */
Add resume methods to i8254 and atrtc devices.
2009-05-01 21:43:04 +00:00
DEVMETHOD(device_resume, atrtc_resume),
Move i386 to generic RTC handling code. Make clock_if.m and subr_rtc.c standard on i386 Add hints for "atrtc" driver, for non-PnP, non-ACPI systems. NB: Make sure to install GENERIC.hints into /boot/device.hints in these! Nuke MD inittodr(), resettodr() functions. Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove comments that no longer apply for that reason. Add new "atrtc" device driver, which handles IBM PC AT Real Time Clock compatible devices using subr_rtc and clock_if. This driver is not entirely clean: other code still fondles the hardware to get a statclock interrupt on non-ACPI timer systems. Wrap some overly long lines. After it has settled in -current, this will be ported to amd64. Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
/* clock interface */
DEVMETHOD(clock_gettime, atrtc_gettime),
DEVMETHOD(clock_settime, atrtc_settime),
{ 0, 0 }
};
static driver_t atrtc_driver = {
"atrtc",
atrtc_methods,
sizeof(struct atrtc_softc),
};
static devclass_t atrtc_devclass;
DRIVER_MODULE(atrtc, isa, atrtc_driver, atrtc_devclass, 0, 0);
DRIVER_MODULE(atrtc, acpi, atrtc_driver, atrtc_devclass, 0, 0);
atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c In addition to the device driver functionality, it exposes a number of functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
DB_SHOW_COMMAND(rtc, rtc)
{
printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
}
#endif /* DDB */
Reference in New Issue Copy Permalink