d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d1a417f17e
freebsd-nq/usr.sbin/ppp/Makefile

83 lines
1.8 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:35:59 +00:00
# $FreeBSD$
MAINTAINER=brian@FreeBSD.org
1999-01-28 15:16:38 +00:00
1995-01-31 06:29:58 +00:00
PROG= ppp
o Redesign the layering mechanism and make the aliasing code part of the layering. We now ``stack'' layers as soon as we open the device (when we figure out what we're dealing with). A static set of `dispatch' routines are also declared for dealing with incoming packets after they've been `pulled' up through the stacked layers. Physical devices are now assigned handlers based on the device type when they're opened. For the moment there are three device types; ttys, execs and tcps. o Increment version number to 2.2 o Make an entry in [uw]tmp for non-tty -direct invocations (after pap/chap authentication). o Make throughput counters quad_t's o Account for the absolute number of mbuf malloc()s and free()s in ``show mem''. o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
SRCS= acf.c arp.c async.c auth.c bundle.c cbcp.c ccp.c chap.c chat.c \
command.c datalink.c deflate.c defs.c exec.c filter.c fsm.c hdlc.c \
id.c iface.c ip.c ipcp.c iplist.c lcp.c link.c log.c lqr.c main.c \
mbuf.c mp.c pap.c physical.c pred.c probe.c prompt.c proto.c route.c \
server.c sig.c slcompress.c sync.c systems.c tcp.c throughput.c \
Allow ``host:port/udp'' devices and support ``host:port/tcp'' as being the same as the previous (still supported) ``host:port'' syntax for tcp socket devices. A udp device uses synchronous ppp rather than async, and avoids the double-retransmit overhead that comes with ppp over tcp (it's usually a bad idea to transport IP over a reliable transport that itself is using an unreliable transport). PPP over UDP provides througput of ** 1.5Mb per second ** with all compression disabled, maxing out a PPro/200 when running ppp twice, back-to-back. This proves that PPPoE is plausable in userland.... This change adds a few more handler functions to struct device and allows derivations of struct device (which may contain their own data etc) to pass themselves through the unix domain socket for MP. ** At last **, struct physical has lost all the tty crud ! iov2physical() is now smart enough to restore the correct stack of layers so that MP servers will work again. The version number has bumped as our MP link transfer contents have changed (they now may contain a `struct device'). Don't extract the protocol twice in MP mode (resulting in protocol rejects for every MP packet). This was broken with my original layering changes. Add ``Physical'' and ``Sync'' log levels for logging the relevent raw packets and add protocol-tracking LogDEBUG stuff in various LayerPush & LayerPull functions. Assign our physical device name for incoming tcp connections by calling getpeername(). Assign our physical device name for incoming udp connections from the address retrieved by the first recvfrom().
1999-05-12 09:49:12 +00:00
timer.c tty.c tun.c udp.c vjcomp.c
Remove -Wpointer-arith
1998-05-21 23:38:08 +00:00
CFLAGS+=-Wall
Initial RADIUS support (using libradius). See the man page for details. Compiling with -DNORADIUS (the default for `release') removes support. TODO: The functionality in libradius::rad_send_request() needs to be supplied as a set of routines so that ppp doesn't have to wait indefinitely for the radius server(s). Instead, we need to get a descriptor back, select() on the descriptor, and ask libradius to service it when necessary. For now, ppp blocks SIGALRM while in rad_send_request(), so it misses PAP/CHAP retries & timeouts if they occur. Only PAP is functional. When CHAP is attempted, libradius complains that no User-Password has been specified... rfc2138 says that it *mustn't* be used for CHAP :-( Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
LDADD+= -lcrypt -lmd -lutil -lz
DPADD+= ${LIBCRYPT} ${LIBMD} ${LIBUTIL} ${LIBZ}
I misunderstood the failure mode - revert BINMODE to 4554. I'm still going to remove ppp from the installation options in 5 days if ppp is still broken, however, as it hasn't worked at installation time for several weeks now and it's only causing people to fill my mailbox with questions.
1999-08-27 07:47:17 +00:00
BINMODE=4554
Specify BINOWN explicitly - we don't want to depend on bsd.own.mk setting it to ``root''.
1998-10-20 00:19:38 +00:00
BINOWN= root
Install as group ``network'' Insist that uid == 0 for client ppp Disallow client sockets if no password is specified Don't exit on failure to open client socket for listening Allow specification of null local password Use reasonable size (smaller) ``vector''s in auth.c Fix "passwd ..." usage message Insist on "all" as arg to "quit" (if any) Drop client socket connection before Cleanup() when "quit all"
1997-09-04 00:38:22 +00:00
BINGRP= network
Make gcc-2.8.1 build ppp cleanly. Support OpenBSD again.
1998-04-25 10:49:52 +00:00
MAN8= ppp.8
Don't moan about not creating tunX.pid and ttyX.if if RELEASE_CRUNCH is defined.
1998-01-29 00:44:15 +00:00
.if defined(RELEASE_CRUNCH)
CFLAGS+=-DRELEASE_CRUNCH
.endif
Allow ``make -DNOKLDLOAD''
1999-09-22 00:44:45 +00:00
.if defined(NOKLDLOAD)
CFLAGS+=-DNOKLDLOAD
.endif
Cosmetic: bring closer to RELENG_3
1999-08-23 23:13:59 +00:00
.if defined(NOALIAS) || defined(NONAT)
NOALIAS -> NONAT Reminded by: jkh
1999-08-22 23:17:57 +00:00
CFLAGS+=-DNONAT
Fix prototypes. Remove extraneous decls. Add ``const'' to several places. Allow ``make NOALIAS=1'' to remove IP aliasing. Merge with OpenBSD - only the Makefiles vary. We can now survive a compile with -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts (although the Makefile just contains -Wall).
1997-11-22 03:37:54 +00:00
.else
Don't dlopen()/dlsym() libalias, use it in the same way as the rest of the world uses libraries.
1998-06-27 14:17:28 +00:00
.if !defined(RELEASE_CRUNCH)
Cosmetic: alias_cmd -> nat_cmd after a repo-copy
1999-09-08 07:34:52 +00:00
SRCS+= nat_cmd.c
Don't dlopen()/dlsym() libalias, use it in the same way as the rest of the world uses libraries.
1998-06-27 14:17:28 +00:00
LDADD+= -lalias
DPADD+= ${LIBALIAS}
.endif
Fix prototypes. Remove extraneous decls. Add ``const'' to several places. Allow ``make NOALIAS=1'' to remove IP aliasing. Merge with OpenBSD - only the Makefiles vary. We can now survive a compile with -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts (although the Makefile just contains -Wall).
1997-11-22 03:37:54 +00:00
.endif
Remove the necessity of -ldes and -lalias etc from release/Makefile. When building a release, RELEASE_CRUNCH is defined for a `make' of the objects required by the crunch of each program. The object list is still obtained in the same way, so you must make sure that all objects are built (empty if necessary) by this make. ppp/Makefile provides an example. Reviewed by: jkh
1998-01-17 14:21:21 +00:00
.if exists(${.CURDIR}/../../secure) && !defined(NOCRYPT) && !defined(NOSECURE) && !defined(RELEASE_CRUNCH)
Update DISTRIBUTION for new crypto world order
2000-02-29 11:44:18 +00:00
DISTRIBUTION=crypto
Allow Microsoft CHAP authentication. This is a combination of MD4 & DES. Submitted by: Gabor Kincses <gabor@acm.org>
1997-09-25 00:52:37 +00:00
CFLAGS+=-DHAVE_DES
SRCS+= chap_ms.c
Use libcrypto instead of libdes.
2000-02-24 21:10:28 +00:00
LDADD+= -lcrypto
DPADD+= ${LIBCRYPTO}
.if defined(RSAREF) && ${RSAREF} == YES
LDADD+= -lRSAglue
DPADD+= ${LIBRSAGLUE}
.endif
Allow Microsoft CHAP authentication. This is a combination of MD4 & DES. Submitted by: Gabor Kincses <gabor@acm.org>
1997-09-25 00:52:37 +00:00
.endif
Initial RADIUS support (using libradius). See the man page for details. Compiling with -DNORADIUS (the default for `release') removes support. TODO: The functionality in libradius::rad_send_request() needs to be supplied as a set of routines so that ppp doesn't have to wait indefinitely for the radius server(s). Instead, we need to get a descriptor back, select() on the descriptor, and ask libradius to service it when necessary. For now, ppp blocks SIGALRM while in rad_send_request(), so it misses PAP/CHAP retries & timeouts if they occur. Only PAP is functional. When CHAP is attempted, libradius complains that no User-Password has been specified... rfc2138 says that it *mustn't* be used for CHAP :-( Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
.if defined(NORADIUS)
CFLAGS+=-DNORADIUS
.else
.if !defined(RELEASE_CRUNCH)
SRCS+= radius.c
LDADD+= -lradius
DPADD+= ${LIBRADIUS}
.endif
.endif
Cosmetic: bring closer to RELENG_3
1999-08-23 23:13:59 +00:00
.if defined(NOI4B) || ${MACHINE_ARCH} == "alpha"
Add ISDN support via isdnd & i4b. This requires version 0.81.1 of the i4b code - namely support of the I4B_VR_REQ ioctl via the i4brbchX device. Ppp controls the phone number, but idle timers and SYNC/RAW decisions are still made by isdnd (in isdnd.rc). This involves a new datalink state machine phase. The ``wait for carrier'' phase happens after dialing but before logging in. The whole dial state should really be abstracted so that each device type can deal with it in its own way (thinking about PPPoE) - but that'll have to wait. The ``set cd'' symantics remain the same for tty devices, but we now delay until we either get CD or timeout waiting (at which time we drop the link if we require CD). For i4b devices we always insist on carrier. Thanks to hm@ for his help, and especially for pointing out that I *don't* need to re-implement isdnd (that was a huge waste of time !) :-]
1999-08-06 20:04:08 +00:00
CFLAGS+=-DNOI4B
.else
SRCS+= i4b.c
.endif
Support PPPoE Help (lots) from: julian, archie Facilities from: ahebert@pubnix.net
1999-11-06 22:50:59 +00:00
.if defined(NONETGRAPH)
CFLAGS+=-DNONETGRAPH
.else
SRCS+= ether.c
LDADD+= -lnetgraph
DPADD+= ${LIBNETGRAPH}
.endif
Remove the necessity of -ldes and -lalias etc from release/Makefile. When building a release, RELEASE_CRUNCH is defined for a `make' of the objects required by the crunch of each program. The object list is still obtained in the same way, so you must make sure that all objects are built (empty if necessary) by this make. ppp/Makefile provides an example. Reviewed by: jkh
1998-01-17 14:21:21 +00:00
.if defined(RELEASE_CRUNCH)
Initial RADIUS support (using libradius). See the man page for details. Compiling with -DNORADIUS (the default for `release') removes support. TODO: The functionality in libradius::rad_send_request() needs to be supplied as a set of routines so that ppp doesn't have to wait indefinitely for the radius server(s). Instead, we need to get a descriptor back, select() on the descriptor, and ask libradius to service it when necessary. For now, ppp blocks SIGALRM while in rad_send_request(), so it misses PAP/CHAP retries & timeouts if they occur. Only PAP is functional. When CHAP is attempted, libradius complains that no User-Password has been specified... rfc2138 says that it *mustn't* be used for CHAP :-( Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
# We must create these objects because crunchgen will link them,
Remove the necessity of -ldes and -lalias etc from release/Makefile. When building a release, RELEASE_CRUNCH is defined for a `make' of the objects required by the crunch of each program. The object list is still obtained in the same way, so you must make sure that all objects are built (empty if necessary) by this make. ppp/Makefile provides an example. Reviewed by: jkh
1998-01-17 14:21:21 +00:00
# and we don't want any unused symbols to spoil the final link.
Don't compile NETGRAPH out of ppp for the release crunch
1999-11-20 10:55:27 +00:00
CFLAGS+=-DNONAT -DNORADIUS -DNOI4B
OBJS+= chap_ms.o nat_cmd.o radius.o
chap_ms.o nat_cmd.o radius.o:
$@ is deprecated, use longer forms of single char macros
1998-06-09 05:36:48 +00:00
>null_${.PREFIX}.c
cc -c -o ${.TARGET} null_${.PREFIX}.c
Remove the necessity of -ldes and -lalias etc from release/Makefile. When building a release, RELEASE_CRUNCH is defined for a `make' of the objects required by the crunch of each program. The object list is still obtained in the same way, so you must make sure that all objects are built (empty if necessary) by this make. ppp/Makefile provides an example. Reviewed by: jkh
1998-01-17 14:21:21 +00:00
.endif
1995-01-31 06:29:58 +00:00
.include <bsd.prog.mk>
Reference in New Issue Copy Permalink