d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d2034aedc1
freebsd-nq/lib/libkvm/Makefile

46 lines
1.2 KiB
Makefile
Raw Normal View History

BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
# @(#)Makefile 8.1 (Berkeley) 6/4/93
Install <kvm.h> from here (after repo copy) so it's all in one package.
1999-10-04 14:56:04 +00:00
# $FreeBSD$
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
LIB= kvm
Re-apply the part of r260022 that was reverted by r260030 with one significant difference: for LIB32 builds both TARGET_ARCH and MACHINE_ARCH are defined. TARGET_ARCH confusingly holds the architecture of the host (e.g. amd64), while MACHINE_ARCH holds the architecture were trying to build (e.g. i386). With both set and different, r260022 changed the behaviour to interpret the condition as building a cross-amd64 libkvm on i386, when obviously we're trying to build an i386 version on amd64. When COMPAT_32BIT is defined, we're building LIB32 and ignore the value of TARGET_ARCH as we did before.
2014-01-13 19:01:14 +00:00
pkgbase: Put a lot of binaries and lib in FreeBSD-runtime All of them are needed to be able to boot to single user and be able to repair a existing FreeBSD installation so put them directly into FreeBSD-runtime. Reviewed by: bapt, gjb Differential Revision: https://reviews.freebsd.org/D21503
2019-09-05 14:13:08 +00:00
PACKAGE= runtime
Revert r284417 it is not necessary anymore
2015-06-15 19:28:07 +00:00
SHLIBDIR?= /lib
Remove kvm_getfiles(3) This libcall has been broken since (at least) r174989/8.0-RELEASE. Bump SHLIB_MAJOR for the change Differential Revision: https://reviews.freebsd.org/D6052 Relnotes: yes Reviewed by: jhb, markj Sponsored by: EMC / Isilon Storage Division
2016-04-30 09:21:13 +00:00
SHLIB_MAJOR= 7
Use __SCCSID for SCCS IDs in libkvm sources. Rather than using #ifdef's around a static char array, use the existing helper macro from <sys/cdefs.h> for SCCS IDs. To preserve existing behavior, add -DNO__SCCSID to CFLAGS to not include SCCS IDs in the built library by default. Reviewed by: brooks, dab (older version) Reviewed by: rgrimes Differential Revision: https://reviews.freebsd.org/D15459
2018-05-22 15:52:22 +00:00
CFLAGS+=-DNO__SCCSID -I${.CURDIR}
unbreak build for sparc64 etc. TARGET won't be defined on non subarches Approved by: rwatson (mentor) Reviewed by: jmg
2006-10-09 05:12:54 +00:00
libkvm: bump WARNS to 6 after recent commits done to resolve warnings issues MFC after: 1 month Tested with: make tinderbox; clang 4.0.0 (amd64), gcc 4.2.1/6.3.0 (amd64) Sponsored by: Dell EMC Isilon
2017-03-22 02:44:39 +00:00
WARNS?= 6
Build lib/ with WARNS=6 by default. Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and lower it when needed. I'm setting WARNS?=0 for secure/. It seems secure/ includes the Makefile.inc provided by lib/. I'm not going to touch that directory. Most of the code there is contributed anyway.
2010-01-02 09:58:07 +00:00
Remove kvm_getfiles(3) This libcall has been broken since (at least) r174989/8.0-RELEASE. Bump SHLIB_MAJOR for the change Differential Revision: https://reviews.freebsd.org/D6052 Relnotes: yes Reviewed by: jhb, markj Sponsored by: EMC / Isilon Storage Division
2016-04-30 09:21:13 +00:00
SRCS= kvm.c kvm_cptime.c kvm_getloadavg.c \
libkvm: Put private kvm routines in kvm_private.c.
2016-07-18 01:02:52 +00:00
kvm_getswapinfo.c kvm_pcpu.c kvm_private.c kvm_proc.c kvm_vnet.c \
Add support to libkvm for reading vmcores from other architectures. - Add a kvaddr_type to represent kernel virtual addresses instead of unsigned long. - Add a struct kvm_nlist which is a stripped down version of struct nlist that uses kvaddr_t for n_value. - Add a kvm_native() routine that returns true if an open kvm descriptor is for a native kernel and memory image. - Add a kvm_open2() function similar to kvm_openfiles(). It drops the unused 'swapfile' argument and adds a new function pointer argument for a symbol resolving function. Native kernels still use _fdnlist() from libc to resolve symbols if a resolver function is not supplied, but cross kernels require a resolver. - Add a kvm_nlist2() function similar to kvm_nlist() except that it uses struct kvm_nlist instead of struct nlist. - Add a kvm_read2() function similar to kvm_read() except that it uses kvaddr_t instead of unsigned long for the kernel virtual address. - Add a new kvm_arch switch of routines needed by a vmcore backend. Each backend is responsible for implementing kvm_read2() for a given vmcore format. - Use libelf to read headers from ELF kernels and cores (except for powerpc cores). - Add internal helper routines for the common page offset hash table used by the minidump backends. - Port all of the existing kvm backends to implement a kvm_arch switch and to be cross-friendly by using private constants instead of ones that vary by platform (e.g. PAGE_SIZE). Static assertions are present when a given backend is compiled natively to ensure the private constants match the real ones. - Enable all of the existing vmcore backends on all platforms. This means that libkvm on any platform should be able to perform KVA translation and read data from a vmcore of any platform. Tested on: amd64, i386, sparc64 (marius) Differential Revision: https://reviews.freebsd.org/D3341
2015-11-27 18:58:26 +00:00
kvm_minidump_aarch64.c \
kvm_amd64.c kvm_minidump_amd64.c \
kvm_arm.c kvm_minidump_arm.c \
kvm_i386.c kvm_minidump_i386.c \
kvm_minidump_mips.c \
kvm_powerpc.c kvm_powerpc64.c \
Add riscv minidump support to libkvm. Submitted by: Mitchell Horne <mhorne063@gmail.com> Differential Revision: https://reviews.freebsd.org/D19171
2019-03-05 23:59:55 +00:00
kvm_minidump_riscv.c \
Remove sparc64 kernel support Remove all sparc64 specific files Remove all sparc64 ifdefs Removee indireeect sparc64 ifdefs
2020-02-03 17:35:11 +00:00
kvm_minidump_powerpc64.c kvm_minidump_powerpc64_hpt.c
Replace beforeinstall target with new variables used by .mk system. Reviewed by: marcel, and make world
2000-01-14 07:57:47 +00:00
INCS= kvm.h
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
Add support to libkvm for reading vmcores from other architectures. - Add a kvaddr_type to represent kernel virtual addresses instead of unsigned long. - Add a struct kvm_nlist which is a stripped down version of struct nlist that uses kvaddr_t for n_value. - Add a kvm_native() routine that returns true if an open kvm descriptor is for a native kernel and memory image. - Add a kvm_open2() function similar to kvm_openfiles(). It drops the unused 'swapfile' argument and adds a new function pointer argument for a symbol resolving function. Native kernels still use _fdnlist() from libc to resolve symbols if a resolver function is not supplied, but cross kernels require a resolver. - Add a kvm_nlist2() function similar to kvm_nlist() except that it uses struct kvm_nlist instead of struct nlist. - Add a kvm_read2() function similar to kvm_read() except that it uses kvaddr_t instead of unsigned long for the kernel virtual address. - Add a new kvm_arch switch of routines needed by a vmcore backend. Each backend is responsible for implementing kvm_read2() for a given vmcore format. - Use libelf to read headers from ELF kernels and cores (except for powerpc cores). - Add internal helper routines for the common page offset hash table used by the minidump backends. - Port all of the existing kvm backends to implement a kvm_arch switch and to be cross-friendly by using private constants instead of ones that vary by platform (e.g. PAGE_SIZE). Static assertions are present when a given backend is compiled natively to ensure the private constants match the real ones. - Enable all of the existing vmcore backends on all platforms. This means that libkvm on any platform should be able to perform KVA translation and read data from a vmcore of any platform. Tested on: amd64, i386, sparc64 (marius) Differential Revision: https://reviews.freebsd.org/D3341
2015-11-27 18:58:26 +00:00
LIBADD= elf
Remove kvm_getfiles(3) This libcall has been broken since (at least) r174989/8.0-RELEASE. Bump SHLIB_MAJOR for the change Differential Revision: https://reviews.freebsd.org/D6052 Relnotes: yes Reviewed by: jhb, markj Sponsored by: EMC / Isilon Storage Division
2016-04-30 09:21:13 +00:00
MAN= kvm.3 kvm_getcptime.3 kvm_geterr.3 kvm_getloadavg.3 \
Implement kvm_kerndisp This change adds a new libkvm function, kvm_kerndisp(), that can be used to retrieve the kernel displacement, that is the difference between the kernel's base virtual address at run time and the kernel base virtual address specified in the kernel image file. This will be used by kgdb, to properly relocate kernel symbols, when needed. Reviewed by: jhb Differential Revision: https://reviews.freebsd.org/D23285
2020-02-06 13:21:59 +00:00
kvm_getpcpu.3 kvm_getprocs.3 kvm_getswapinfo.3 kvm_kerndisp.3 \
kvm_native.3 kvm_nlist.3 kvm_open.3 kvm_read.3
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
o Provide function kvm_read_zpcpu() to access UMA_ZONE_PCPU allocations. o Provide function kvm_counter_u64_fetch() to fetch valut of a counter(9). Sponsored by: Nginx, Inc.
2013-04-10 20:26:53 +00:00
MLINKS+=kvm_getpcpu.3 kvm_getmaxcpu.3 \
kvm_getpcpu.3 kvm_dpcpu_setcpu.3 \
kvm_getpcpu.3 kvm_read_zpcpu.3 \
Fix typo.
2013-04-11 10:14:28 +00:00
kvm_getpcpu.3 kvm_counter_u64_fetch.3
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
MLINKS+=kvm_getprocs.3 kvm_getargv.3 kvm_getprocs.3 kvm_getenvv.3
Add support to libkvm for reading vmcores from other architectures. - Add a kvaddr_type to represent kernel virtual addresses instead of unsigned long. - Add a struct kvm_nlist which is a stripped down version of struct nlist that uses kvaddr_t for n_value. - Add a kvm_native() routine that returns true if an open kvm descriptor is for a native kernel and memory image. - Add a kvm_open2() function similar to kvm_openfiles(). It drops the unused 'swapfile' argument and adds a new function pointer argument for a symbol resolving function. Native kernels still use _fdnlist() from libc to resolve symbols if a resolver function is not supplied, but cross kernels require a resolver. - Add a kvm_nlist2() function similar to kvm_nlist() except that it uses struct kvm_nlist instead of struct nlist. - Add a kvm_read2() function similar to kvm_read() except that it uses kvaddr_t instead of unsigned long for the kernel virtual address. - Add a new kvm_arch switch of routines needed by a vmcore backend. Each backend is responsible for implementing kvm_read2() for a given vmcore format. - Use libelf to read headers from ELF kernels and cores (except for powerpc cores). - Add internal helper routines for the common page offset hash table used by the minidump backends. - Port all of the existing kvm backends to implement a kvm_arch switch and to be cross-friendly by using private constants instead of ones that vary by platform (e.g. PAGE_SIZE). Static assertions are present when a given backend is compiled natively to ensure the private constants match the real ones. - Enable all of the existing vmcore backends on all platforms. This means that libkvm on any platform should be able to perform KVA translation and read data from a vmcore of any platform. Tested on: amd64, i386, sparc64 (marius) Differential Revision: https://reviews.freebsd.org/D3341
2015-11-27 18:58:26 +00:00
MLINKS+=kvm_nlist.3 kvm_nlist2.3
MLINKS+=kvm_open.3 kvm_close.3 kvm_open.3 kvm_open2.3 kvm_open.3 kvm_openfiles.3
MLINKS+=kvm_read.3 kvm_read2.3 kvm_read.3 kvm_write.3
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
lib/libkvm: start adding basic tests for kvm(3) - kvm_close: add a testcase to verify support for errno = EINVAL / -1 (see D10065) when kd == NULL is provided to the libcall. - kvm_geterr: -- Add a negative testcase for kd == NULL returning "" (see D10022). -- Add two positive testcases: --- test the error case using kvm_write on a O_RDONLY descriptor. --- test the "no error" case using kvm_read(3) and kvm_nlist(3) as helper routines and by injecting a bogus error message via _kvm_err (an internal API) _kvm_err was used as there isn't a formalized way to clear the error output, and because kvm_nlist always returns ENOENT with the NULL terminator today. - kvm_open, kvm_open2: -- Add some basic negative tests for kvm_open(3) and kvm_open2(3). Testing positive cases with a specific `corefile`/`execfile`/`resolver` requires more work and would require user intervention today in order to reliably test this out. Reviewed by: markj MFC after: 2 months Sponsored by: Dell EMC Isilon Differential Revision: D10024
2017-03-28 17:37:49 +00:00
.include <src.opts.mk>
Add HAS_TESTS to all Makefiles that use the SUBDIR.${MK_TESTS}+= tests idiom
2017-08-02 08:14:06 +00:00
HAS_TESTS=
lib/libkvm: start adding basic tests for kvm(3) - kvm_close: add a testcase to verify support for errno = EINVAL / -1 (see D10065) when kd == NULL is provided to the libcall. - kvm_geterr: -- Add a negative testcase for kd == NULL returning "" (see D10022). -- Add two positive testcases: --- test the error case using kvm_write on a O_RDONLY descriptor. --- test the "no error" case using kvm_read(3) and kvm_nlist(3) as helper routines and by injecting a bogus error message via _kvm_err (an internal API) _kvm_err was used as there isn't a formalized way to clear the error output, and because kvm_nlist always returns ENOENT with the NULL terminator today. - kvm_open, kvm_open2: -- Add some basic negative tests for kvm_open(3) and kvm_open2(3). Testing positive cases with a specific `corefile`/`execfile`/`resolver` requires more work and would require user intervention today in order to reliably test this out. Reviewed by: markj MFC after: 2 months Sponsored by: Dell EMC Isilon Differential Revision: D10024
2017-03-28 17:37:49 +00:00
SUBDIR.${MK_TESTS}= tests
BSD 4.4 Lite Lib Sources
1994-05-27 05:00:24 +00:00
.include <bsd.lib.mk>
Reference in New Issue Copy Permalink