freebsd-nq/sys/modules/amr/Makefile

# $FreeBSD$

.PATH: ${.CURDIR}/../../dev/amr

SUBDIR= amr_cam
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
SUBDIR+= amr_linux
.endif

KMOD=	amr
SRCS=	amr.c amr_pci.c amr_disk.c device_if.h bus_if.h pci_if.h

# Enable a questionable optimisation for newer adapters
#CFLAGS+= -DAMR_QUARTZ_GOFASTER

# Debugging
#CFLAGS+= -DAMR_DEBUG=3

.include <bsd.kmod.mk>
This is a driver for the AMI MegaRAID family of controllers. It all of the AMI PCI controllers using the 8LD firmware interface (40LD firmware will be supported as soon as I have hardware to test with). These controllers are rebadged by Dell as the PERC, as well as by HP and possibly other vendors. 1999-10-07 02:23:12 +00:00			`# $FreeBSD$`

Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00			`.PATH: ${.CURDIR}/../../dev/amr`

Move the CAM passthrough code into a true module so that it doesn't have to be compiled into the main AMR driver. It's code that is nice to have but not required for normal operation, and it is reported to cause problems for some people. 2008-11-03 00:53:54 +00:00			`SUBDIR= amr_cam`
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed... 2010-08-23 06:13:29 +00:00			`.if ${MACHINE_CPUARCH} == "i386" \|\| ${MACHINE_CPUARCH} == "amd64"`
Move the CAM passthrough code into a true module so that it doesn't have to be compiled into the main AMR driver. It's code that is nice to have but not required for normal operation, and it is reported to cause problems for some people. 2008-11-03 00:53:54 +00:00			`SUBDIR+= amr_linux`
Tie the amr_linux module into the build for i386 & amd64 2006-01-25 18:11:59 +00:00			`.endif`

Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00			`KMOD= amr`
			`SRCS= amr.c amr_pci.c amr_disk.c device_if.h bus_if.h pci_if.h`
Major update to the AMI MegaRAID driver. - New support for 40LD firmware found in Series 475 and 471 adapters. - Better support for 8LD firmware adapters - Ioctl passthrough interface for userland utilities. - Improved error handling and queueing. - Several bugfixes (including the 'still open' shutdown bug and closing some small race conditions). - Zone-style command allocator, reducing memory wasted under heavy load conditions. - CAM interface (disabled and not fully working) for SCSI passthrough access to non-disk devices Thanks to AMI for supplying a pile of new adapters and various other help in making this happen. 2000-08-30 07:52:50 +00:00
			`# Enable a questionable optimisation for newer adapters`
Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00			`#CFLAGS+= -DAMR_QUARTZ_GOFASTER`
Major update to the AMI MegaRAID driver. - New support for 40LD firmware found in Series 475 and 471 adapters. - Better support for 8LD firmware adapters - Ioctl passthrough interface for userland utilities. - Improved error handling and queueing. - Several bugfixes (including the 'still open' shutdown bug and closing some small race conditions). - Zone-style command allocator, reducing memory wasted under heavy load conditions. - CAM interface (disabled and not fully working) for SCSI passthrough access to non-disk devices Thanks to AMI for supplying a pile of new adapters and various other help in making this happen. 2000-08-30 07:52:50 +00:00
			`# Debugging`
Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00			`#CFLAGS+= -DAMR_DEBUG=3`
This is a driver for the AMI MegaRAID family of controllers. It all of the AMI PCI controllers using the 8LD firmware interface (40LD firmware will be supported as soon as I have hardware to test with). These controllers are rebadged by Dell as the PERC, as well as by HP and possibly other vendors. 1999-10-07 02:23:12 +00:00
Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of encoding the relative path. 2000-05-27 01:14:33 +00:00			`.include <bsd.kmod.mk>`