freebsd-nq/etc/MAKEDEV

623 lines
17 KiB
Plaintext
Raw Normal View History

#!/bin/sh -
#
# Copyright (c) 1990 The Regents of the University of California.
# All rights reserved.
#
# Written and contributed by W. Jolitz 12/90
#
# Redistribution and use in source and binary forms are permitted provided
# that: (1) source distributions retain this entire copyright notice and
# comment, and (2) distributions including binaries display the following
# acknowledgement: ``This product includes software developed by the
# University of California, Berkeley and its contributors'' in the
# documentation or other materials provided with the distribution and in
# all advertising materials mentioning features or use of this software.
# Neither the name of the University nor the names of its contributors may
# be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
#
# Device "make" file. Valid arguments:
# all makes all known devices, standard number of units (or close)
# std standard devices
# local configuration specific devices
#
# Tapes:
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
# st* "NEW type scsi tapes" (old driver uses the
# block devices of the disks to get access)
1994-02-07 04:25:07 +00:00
# ft* QIC-40/QIC-80 3M cartridge tape (interfaced
# via the floppy disk controller)
#
# Disks:
# wd* "winchester" disk drives (ST506,IDE,ESDI,RLL,...)
# fd* "floppy" disk drives (3 1/2", 5 1/4")
# sd* "scsi disks"
1994-03-07 00:57:38 +00:00
# cd* "scsi cdrom disks"
# mcd* "mitsumi cdrom disks"
# vn* "vnode disks"
#
# Console ports:
# vty* virtual console devices for syscons/pcvt/codrv
#
# Pointing devices:
# mse* Logitech and ATI Inport bus mouse
# psm* PS/2 mouse
#
# Terminal ports:
# tty* general purpose serial ports
# cua* dialout serial ports
#
# Pseudo terminals:
# pty* set of 16 master and slave pseudo terminals
# vty* virtual terminals using syscons/pcvt/codrv console
#
# Printers:
# lpt* stock lp
#
# Call units:
#
# Special purpose devices:
# bpf* packet filter
# speaker pc speaker
# tw* xten power controller
# snd* various sound cards
1994-04-21 14:08:27 +00:00
# pcaudio PCM audio driver
# socksys iBCS2 socket system driver
# vat VAT compatibility audio driver (requires snd*)
#
1994-12-08 00:44:55 +00:00
# $Id: MAKEDEV,v 1.58 1994/12/06 23:06:10 ache Exp $
#
PATH=/sbin:/bin/:/usr/bin:/usr/sbin:
umask 77
# Convert the last character of a tty name to a minor number.
ttyminor()
{
case $unit in
[0-9]) m=$unit;;
a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
v) m=31;;
default) m="?";;
esac
echo $m
}
for i
do
case $i in
all)
sh MAKEDEV std # standard
sh MAKEDEV wd0 wd1 wd2 wd3 fd0 fd1 sd0 sd1 sd2 sd3 # bdev, disk
1994-10-29 10:03:37 +00:00
sh MAKEDEV cd0 mcd0 # bdev, cdrom
sh MAKEDEV ft0 wt0 st0 # bdev, tape
sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial
sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial
sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
sh MAKEDEV pty0 ch0 tw0 bpf0 # cdev
sh MAKEDEV speaker pcaudio psm0 mse0 # cdev
sh MAKEDEV vty4 # cdev
;;
std)
rm -f console drum mem kmem null zero io tty klog stdin stdout stderr
rm -f lkm
mknod console c 0 0; chmod 600 console; chown root.wheel console
mknod drum c 4 0; chmod 640 drum; chown root.kmem drum
mknod kmem c 2 1; chmod 640 kmem; chown root.kmem kmem
mknod mem c 2 0; chmod 640 mem; chown root.kmem mem
mknod null c 2 2; chmod 666 null; chown root.wheel null
mknod zero c 2 12; chmod 666 zero; chown root.wheel zero
mknod io c 2 14; chmod 640 io; chown root.kmem io
mknod tty c 1 0; chmod 666 tty; chown root.wheel tty
mknod klog c 7 0; chmod 600 klog; chown root.wheel klog
mknod stdin c 22 0; chmod 666 stdin; chown root.wheel stdin
mknod stdout c 22 1; chmod 666 stdout; chown root.wheel stdout
mknod stderr c 22 2; chmod 666 stderr; chown root.wheel stderr
mknod lkm c 32 0; chmod 644 lkm; chown root.wheel lkm
rm -f fd/*
mkdir fd > null 2>&1
(cd fd && eval `echo "" | awk ' BEGIN { \
for (i = 0; i < 64; i++) \
printf("mknod %d c 22 %d;", i, i)}'`)
chown -R bin.bin fd
chmod 555 fd
chmod 666 fd/*
;;
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
wt*)
umask 7 ; u=`expr $i : '..\(.*\)'`
if [ x$u = x ]; then u=0; fi
From: Sergey Ryzhkov, Serge Vakulenko E-mail: <sir@kiae.su>, <vak@zebub.msk.su> added new /dev/wt entries for wt.c version 1.3 8) Some controllers support only 1024 block length. Setting WT_BSIZE bit in device minor number turns on this mode. Minor number structure: 0bfffuuu Fields: uuu - Unit number. It's possible to install up to three tape controllers on the same machine, using DRQs 1..3. Hence, unit number can lie in range 0..2. fff - Tape format number: 0 - /dev/rwt0 - default density (auto select) 1 - /dev/rwt0a - QIC 11 (obsolete) 2 - /dev/rwt0b - QIC 24 (60 megabytes) 3 - /dev/rwt0c - QIC 120 (120 megabytes) 4 - /dev/rwt0d - QIC 150 (150 megabytes) 5 - /dev/rwt0e - QIC 300 (300 megabytes?) 6 - /dev/rwt0f - QIC 600 (600 megabytes?) b - Long block size flag. With this bit set, the driver will perform all i/o operations with the controller using 1024-byte blocks, instead of 512 ones. Some controllers need it (CMS for example). If you Wangtek controller does not stream well, you can try to use /dev/rWt0 device instead of /dev/rwt0 (uncomment needed lines in /dev/MAKEDEV to create it). Block interface (writing blocks less than 2048 bytes) is not functioning pwoperly. Use raw interface instead. Thanks to all who helped to test it on the following hardware: Controller Drive Volume Interface Thanks to --------------------------------------------------------------------------- Archive SC-499 Archive 2150L 150 Meg QIC-02 KIAE CMS? ? 150 Meg QIC-02 KIAE Everex EV 831/833 ? ? QIC-36 Joergen Haegg Wangtek ASSY Wangtek 60 Meg QIC-02 Ken Whedbee Tecmar QT150i? Wangtek 5150EQ ? QIC-02? Marko Teiste ? Wangtek 5099EK 60 Meg QIC-36 Robert Shien Archive SC400S ? 60 Meg ? Warren Toomey
1993-12-14 11:11:37 +00:00
rm -f r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks
mknod nrwt${u} c 10 `expr 4 + $u`
From: Sergey Ryzhkov, Serge Vakulenko E-mail: <sir@kiae.su>, <vak@zebub.msk.su> added new /dev/wt entries for wt.c version 1.3 8) Some controllers support only 1024 block length. Setting WT_BSIZE bit in device minor number turns on this mode. Minor number structure: 0bfffuuu Fields: uuu - Unit number. It's possible to install up to three tape controllers on the same machine, using DRQs 1..3. Hence, unit number can lie in range 0..2. fff - Tape format number: 0 - /dev/rwt0 - default density (auto select) 1 - /dev/rwt0a - QIC 11 (obsolete) 2 - /dev/rwt0b - QIC 24 (60 megabytes) 3 - /dev/rwt0c - QIC 120 (120 megabytes) 4 - /dev/rwt0d - QIC 150 (150 megabytes) 5 - /dev/rwt0e - QIC 300 (300 megabytes?) 6 - /dev/rwt0f - QIC 600 (600 megabytes?) b - Long block size flag. With this bit set, the driver will perform all i/o operations with the controller using 1024-byte blocks, instead of 512 ones. Some controllers need it (CMS for example). If you Wangtek controller does not stream well, you can try to use /dev/rWt0 device instead of /dev/rwt0 (uncomment needed lines in /dev/MAKEDEV to create it). Block interface (writing blocks less than 2048 bytes) is not functioning pwoperly. Use raw interface instead. Thanks to all who helped to test it on the following hardware: Controller Drive Volume Interface Thanks to --------------------------------------------------------------------------- Archive SC-499 Archive 2150L 150 Meg QIC-02 KIAE CMS? ? 150 Meg QIC-02 KIAE Everex EV 831/833 ? ? QIC-36 Joergen Haegg Wangtek ASSY Wangtek 60 Meg QIC-02 Ken Whedbee Tecmar QT150i? Wangtek 5150EQ ? QIC-02? Marko Teiste ? Wangtek 5099EK 60 Meg QIC-36 Robert Shien Archive SC400S ? 60 Meg ? Warren Toomey
1993-12-14 11:11:37 +00:00
# mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks
# mknod nrWt${u} c 10 `expr 68 + $u`
mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes
mknod nrwt${u}b c 10 `expr 20 + $u`
From: Sergey Ryzhkov, Serge Vakulenko E-mail: <sir@kiae.su>, <vak@zebub.msk.su> added new /dev/wt entries for wt.c version 1.3 8) Some controllers support only 1024 block length. Setting WT_BSIZE bit in device minor number turns on this mode. Minor number structure: 0bfffuuu Fields: uuu - Unit number. It's possible to install up to three tape controllers on the same machine, using DRQs 1..3. Hence, unit number can lie in range 0..2. fff - Tape format number: 0 - /dev/rwt0 - default density (auto select) 1 - /dev/rwt0a - QIC 11 (obsolete) 2 - /dev/rwt0b - QIC 24 (60 megabytes) 3 - /dev/rwt0c - QIC 120 (120 megabytes) 4 - /dev/rwt0d - QIC 150 (150 megabytes) 5 - /dev/rwt0e - QIC 300 (300 megabytes?) 6 - /dev/rwt0f - QIC 600 (600 megabytes?) b - Long block size flag. With this bit set, the driver will perform all i/o operations with the controller using 1024-byte blocks, instead of 512 ones. Some controllers need it (CMS for example). If you Wangtek controller does not stream well, you can try to use /dev/rWt0 device instead of /dev/rwt0 (uncomment needed lines in /dev/MAKEDEV to create it). Block interface (writing blocks less than 2048 bytes) is not functioning pwoperly. Use raw interface instead. Thanks to all who helped to test it on the following hardware: Controller Drive Volume Interface Thanks to --------------------------------------------------------------------------- Archive SC-499 Archive 2150L 150 Meg QIC-02 KIAE CMS? ? 150 Meg QIC-02 KIAE Everex EV 831/833 ? ? QIC-36 Joergen Haegg Wangtek ASSY Wangtek 60 Meg QIC-02 Ken Whedbee Tecmar QT150i? Wangtek 5150EQ ? QIC-02? Marko Teiste ? Wangtek 5099EK 60 Meg QIC-36 Robert Shien Archive SC400S ? 60 Meg ? Warren Toomey
1993-12-14 11:11:37 +00:00
mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes
mknod nrwt${u}c c 10 `expr 28 + $u`
mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes
mknod nrwt${u}d c 10 `expr 36 + $u`
# mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes?
# mknod nrwt${u}e c 10 `expr 44 + $u`
# mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes?
# mknod nrwt${u}f c 10 `expr 52 + $u`
chown root.operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
umask 77
;;
fd*)
umask 2 ; unit=`expr $i : '..\(.*\)'`
name=fd; blk=2; chr=9;
rm -f $name$unit* r$name$unit*
case $unit in
0|1|2|3)
mknod ${name}${unit} b $blk `expr $unit '*' 64`
mknod r${name}${unit} c $chr `expr $unit '*' 64`
# Fake BSD partitions
for i in a b c d e f g h
do
ln ${name}${unit} ${name}${unit}$i
ln r${name}${unit} r${name}${unit}$i
done
# User-readable and programmer-readable name sets
mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1`
mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
# ln ${name}${unit}.1720 ${name}${unit}135hs21
# ln r${name}${unit}.1720 r${name}${unit}135hs21
mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2`
mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
# ln ${name}${unit}.1480 ${name}${unit}135hs18
# ln r${name}${unit}.1480 r${name}${unit}135hs18
# ln ${name}${unit}.1480 ${name}${unit}96hs18
# ln r${name}${unit}.1480 r${name}${unit}96hs18
mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3`
mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
# ln ${name}${unit}.1440 ${name}${unit}135
# ln r${name}${unit}.1440 r${name}${unit}135
# ln ${name}${unit}.1440 ${name}${unit}135ds18
# ln r${name}${unit}.1440 r${name}${unit}135ds18
# ln ${name}${unit}.1440 ${name}${unit}96ds18
# ln r${name}${unit}.1440 r${name}${unit}96ds18
mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4`
mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
# ln ${name}${unit}.1200 ${name}${unit}96
# ln r${name}${unit}.1200 r${name}${unit}96
# ln ${name}${unit}.1200 ${name}${unit}96ds15
# ln r${name}${unit}.1200 r${name}${unit}96ds15
# ln ${name}${unit}.1200 ${name}${unit}135ds15
# ln r${name}${unit}.1200 r${name}${unit}135ds15
mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5`
mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
# ln ${name}${unit}.820 ${name}${unit}96hs10
# ln r${name}${unit}.820 r${name}${unit}96hs10
# ln ${name}${unit}.820 ${name}${unit}135hs10
# ln r${name}${unit}.820 r${name}${unit}135hs10
mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6`
mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
# ln ${name}${unit}.800 ${name}${unit}96ds10
# ln r${name}${unit}.800 r${name}${unit}96ds10
# ln ${name}${unit}.800 ${name}${unit}135ds10
# ln r${name}${unit}.800 r${name}${unit}135ds10
mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7`
mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
# ln ${name}${unit}.720 ${name}${unit}96ds9
# ln r${name}${unit}.720 r${name}${unit}96ds9
# ln ${name}${unit}.720 ${name}${unit}135ds9
# ln r${name}${unit}.720 r${name}${unit}135ds9
mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8`
mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
# ln ${name}${unit}.360 ${name}${unit}48
# ln r${name}${unit}.360 r${name}${unit}48
# ln ${name}${unit}.360 ${name}${unit}48ds9
# ln r${name}${unit}.360 r${name}${unit}48ds9
chgrp operator ${name}${unit}* r${name}${unit}*
chmod 640 ${name}${unit}* r${name}${unit}*
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
1994-02-07 04:25:07 +00:00
ft*)
umask 2 ; unit=`expr $i : '..\(.*\)'`
name=ft; blk=2; chr=9;
rm -f $name$unit* r$name$unit*
case $unit in
0|1|2|3)
mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32`
mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32`
ln ${name}${unit} ${name}${unit}a
ln r${name}${unit} r${name}${unit}a
chgrp operator ${name}${unit}* r${name}${unit}*
chmod 640 ${name}${unit}* r${name}${unit}*
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
sd*|vn*|wd*)
umask 2 ; unit=`expr $i : '..\(.*\)'`
case $i in
sd*) name=sd; blk=4; chr=13;;
wd*) name=wd; blk=0; chr=3;;
vn*) name=vn; blk=15; chr=43;;
esac
rm -f $name$unit? r$name$unit?
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
mknod ${name}${unit}b b $blk `expr $unit '*' 8 + 1`
mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
mknod ${name}${unit}d b $blk `expr $unit '*' 8 + 3`
mknod ${name}${unit}e b $blk `expr $unit '*' 8 + 4`
mknod ${name}${unit}f b $blk `expr $unit '*' 8 + 5`
mknod ${name}${unit}g b $blk `expr $unit '*' 8 + 6`
mknod ${name}${unit}h b $blk `expr $unit '*' 8 + 7`
case $i in
wd*)
mknod ${name}${unit}i b $blk `expr $unit '*' 8 + 64`
mknod ${name}${unit}j b $blk `expr $unit '*' 8 + 65`
mknod ${name}${unit}k b $blk `expr $unit '*' 8 + 66`
mknod ${name}${unit}l b $blk `expr $unit '*' 8 + 67`
mknod ${name}${unit}m b $blk `expr $unit '*' 8 + 68`
esac
mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
mknod r${name}${unit}b c $chr `expr $unit '*' 8 + 1`
mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
mknod r${name}${unit}d c $chr `expr $unit '*' 8 + 3`
mknod r${name}${unit}e c $chr `expr $unit '*' 8 + 4`
mknod r${name}${unit}f c $chr `expr $unit '*' 8 + 5`
mknod r${name}${unit}g c $chr `expr $unit '*' 8 + 6`
mknod r${name}${unit}h c $chr `expr $unit '*' 8 + 7`
case $i in
wd*)
mknod r${name}${unit}i c $chr `expr $unit '*' 8 + 64`
mknod r${name}${unit}j c $chr `expr $unit '*' 8 + 65`
mknod r${name}${unit}k c $chr `expr $unit '*' 8 + 66`
mknod r${name}${unit}l c $chr `expr $unit '*' 8 + 67`
mknod r${name}${unit}m c $chr `expr $unit '*' 8 + 68`
esac
chgrp operator ${name}${unit}[a-m] r${name}${unit}[a-m]
chmod 640 ${name}${unit}[a-m] r${name}${unit}[a-m]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
uk*)
unit=`expr $i : 'uk\(.*\)'`
rm -f uk$unit
mknod uk$unit c 27 $unit
;;
pty*)
class=`expr $i : 'pty\(.*\)'`
case $class in
0) offset=0 name=p;;
1) offset=16 name=q;;
2) offset=32 name=r;;
3) offset=48 name=s;;
# Note that telnetd, rlogind, and xterm (at least) only look at p-s.
4) offset=64 name=t;;
*) echo bad unit for pty in: $i;;
esac
case $class in
0|1|2|3|4)
umask 0
eval `echo $offset $name | awk ' { b=$1; n=$2 } END {
for (i = 0; i < 16; i++)
printf("rm -f tty%s%x; mknod tty%s%x c 5 %d; \
rm -f pty%s%x; mknod pty%s%x c 6 %d; ", \
n, i, n, i, b+i, n, i, n, i, b+i); }'`
umask 77
;;
esac
;;
st*)
umask 2 ; unit=`expr $i : '..\(.*\)'`
chr=14;
#remove old stype names
rm -f [hml]rst[0123456] [hml][en]rst[0123456] [hml]enrst[0123456]
#remove new style names
rm -f rst${unit} [en]rst${unit} enrst${unit}
rm -f rst${unit}.[0123] nrst${unit}.[0123]\
erst${unit}.[0123] st${unit}ctl.[0123]
case $unit in
0|1|2|3|4|5|6)
for mode in 0 1 2 3
do
mknod rst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 0`
mknod nrst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 1`
mknod erst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 2`
mknod st${unit}ctl.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 3`
chgrp operator rst${unit}.${mode}\
nrst${unit}.${mode} \
erst${unit}.${mode} \
st${unit}ctl.${mode}
chmod 640 rst${unit}.${mode}\
nrst${unit}.${mode} \
erst${unit}.${mode}
chmod 660 st${unit}ctl.${mode}
done
ln rst${unit}.0 rst${unit}
ln nrst${unit}.0 nrst${unit}
ln erst${unit}.0 erst${unit}
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
ch*)
umask 2 ; unit=`expr $i : '..\(.*\)'`
case $i in
ch*) name=ch; chr=17;;
esac
rm -f $name$unit
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit} c $chr `expr $unit '*' 16 + 0`
chgrp operator ${name}${unit}
chmod 640 ${name}${unit}
;;
*)
echo bad unit for media changer in: $i
;;
esac
umask 77
;;
1994-03-07 00:57:38 +00:00
cd*|mcd*)
umask 2 ;
case $i in
1994-03-07 00:57:38 +00:00
cd*) unit=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
mcd*) unit=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
esac
rm -f $name$unit? r$name$unit?
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
lpt*)
unit=`expr $i : 'lpt\(.*\)'`
rm -f lpt$unit
rm -f lpctl$unit
mknod lpt$unit c 16 $unit
mknod lpctl$unit c 16 `expr $unit + 128`
chown root.wheel lpt$unit
chown root.wheel lpt$unit
;;
tw*)
unit=`expr $i : 'tw\(.*\)'`
rm -f tw$unit
mknod tw$unit c 19 $unit
chown bin.bin tw$unit
;;
# Use this to create virtual consoles for syscons, pcvt or codrv
# ttyv0-b
# use as MAKEDEV vtyNN to create NN entries
vty*)
chr=12
units=`expr $i : 'vty\(.*\)'`
eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END {
for (i = 0; i < n; i++)
printf("rm -f ttyv%01x; mknod ttyv%01x c %d %d;", \
i, i, c, i); }'`
ln -fs ttyv0 vga # XXX X still needs this pccons relic
;;
bpf*)
unit=`expr $i : 'bpf\(.*\)'`
rm -f bpf$unit
mknod bpf$unit c 23 $unit
chown root.wheel bpf$unit
;;
speaker)
rm -f speaker
mknod speaker c 26 0
chown root.wheel speaker
;;
cuaa?|cua?)
umask 7
1994-12-08 00:44:55 +00:00
unit=`expr $i : 'cua.*\(.\)$'`
rm -f cua*a$unit
m=`ttyminor $unit`
mknod cuaa$unit c 28 `expr $m + 128`
mknod cuaia$unit c 28 `expr $m + 32 + 128`
mknod cuala$unit c 28 `expr $m + 64 + 128`
chown uucp.dialer cua*a$unit
umask 77
;;
ttyd?|tty?)
1994-12-08 00:44:55 +00:00
unit=`expr $i : 'tty.*\(.\)$'`
rm -f tty*d$unit
m=`ttyminor $unit`
mknod ttyd$unit c 28 $m
mknod ttyid$unit c 28 `expr $m + 32`
mknod ttyld$unit c 28 `expr $m + 64`
;;
mse*)
unit=`expr $i : 'mse\(.*\)'`
chr=27
rm -f mse$unit
mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel mse$unit
;;
psm*)
unit=`expr $i : 'psm\(.*\)'`
chr=21
rm -f psm$unit
mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel psm$unit
;;
mouse*)
1994-12-08 00:44:55 +00:00
name=`expr $i : 'mouse\(.*\)'`
if [ ! -c $name ]; then
$0 $name # make the appropriate device
fi
rm -f mouse
ln -s $name mouse
;;
1994-04-21 14:08:27 +00:00
pcaudio)
rm -f pcaudio pcaudioctl
mknod pcaudio c 24 0
mknod pcaudioctl c 24 128
chown root.wheel pcaudio pcaudioctl
chmod 666 pcaudio pcaudioctl
1994-04-21 14:08:27 +00:00
;;
socksys)
rm -f socksys nfsd spx
mknod socksys c 41 0
mknod spx c 41 1
ln -s /dev/socksys /dev/nfsd
chown root.wheel socksys nfsd spx
chmod 666 socksys nfsd spx
;;
snd*)
chr=30
rm -f mixer # Mixer [ Control ]
mknod mixer c $chr 0
chmod 666 mixer
rm -f sequencer # Sequencer [ FM Synth and MIDI output ]
mknod sequencer c $chr 1
chmod 666 sequencer
rm -f midi # Midi input [ Not implemented ]
mknod midi c $chr 2
rm -f dsp # DSP [ Digitized voice ]
mknod dsp c $chr 3
chmod 666 dsp
rm -f audio # SPARC audio [ Not fully implemented ]
mknod audio c $chr 4
chmod 666 audio
rm -f dsp16 # DSP16 [ Same as dsp, except 16 bits ]
mknod dsp16 c $chr 5
chmod 666 dsp16
rm -f sndstat # Status Device [ Debugging interface ]
mknod sndstat c $chr 6
chmod 666 sndstat
rm -f pro_midi # PRO_MIDI [PAS midi input and output]
mknod pro_midi c $chr 15
chmod 666 pro_midi
rm -f dsp1 # DSP 1 [ SB emulation of PAS16 or 2nd audio ]
mknod dsp1 c $chr 19
chmod 666 dsp1
rm -f audio1 # Sparc Audio 1 [ SB emulation of PAS16 or 2nd audio ]
mknod audio1 c $chr 20
chmod 666 audio1
;;
vat)
rm -f vatio
mknod vatio c 25 128
chown root.wheel vatio
chmod 660 vatio
;;
apm)
1994-11-10 02:32:29 +00:00
rm -f apm0
mknod apm0 c 39 0
chown root.wheel apm0
chmod 660 apm0
;;
ttyx?|ttyy?|ttyz?)
case $i in
*0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
*4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
*8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
*c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
esac
case $i in
ttyy?) unit=`expr $unit \+ 16`;;
ttyz?) unit=`expr $unit \+ 32`;;
esac
rm -f $i
mknod $i c 42 $unit
chown uucp.wheel $i
;;
cronyx)
rm -f cronyx
mknod cronyx c 42 63
chown 444 cronyx
;;
local)
umask 0
sh MAKEDEV.local
;;
*)
echo $i - no such device name
;;
esac
done