freebsd-nq/sys/ia64/ia32/ia32_signal.c

299 lines
8.3 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2002 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_compat.h"
#define __ELF_WORD_SIZE 32
#include <sys/param.h>
#include <sys/exec.h>
#include <sys/fcntl.h>
#include <sys/imgact.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/mman.h>
#include <sys/namei.h>
#include <sys/pioctl.h>
#include <sys/proc.h>
#include <sys/procfs.h>
#include <sys/resourcevar.h>
#include <sys/systm.h>
#include <sys/signalvar.h>
#include <sys/stat.h>
#include <sys/sx.h>
#include <sys/syscall.h>
#include <sys/sysctl.h>
#include <sys/sysent.h>
#include <sys/vnode.h>
#include <sys/imgact_elf.h>
#include <sys/sysproto.h>
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
#include <machine/frame.h>
#include <machine/md_var.h>
#include <machine/pcb.h>
#include <vm/vm.h>
#include <vm/vm_kern.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <vm/vm_object.h>
#include <vm/vm_extern.h>
#include <compat/freebsd32/freebsd32_signal.h>
#include <compat/freebsd32/freebsd32_util.h>
#include <compat/freebsd32/freebsd32_proto.h>
#include <compat/ia32/ia32_signal.h>
#include <x86/include/psl.h>
#include <x86/include/segments.h>
#include <x86/include/specialreg.h>
char ia32_sigcode[] = {
0xff, 0x54, 0x24, 0x10, /* call *SIGF_HANDLER(%esp) */
0x8d, 0x44, 0x24, 0x14, /* lea SIGF_UC(%esp),%eax */
0x50, /* pushl %eax */
0xf7, 0x40, 0x54, 0x00, 0x00, 0x02, 0x02, /* testl $PSL_VM,UC_EFLAGS(%ea
x) */
0x75, 0x03, /* jne 9f */
0x8e, 0x68, 0x14, /* movl UC_GS(%eax),%gs */
0xb8, 0x57, 0x01, 0x00, 0x00, /* 9: movl $SYS_sigreturn,%eax */
0x50, /* pushl %eax */
0xcd, 0x80, /* int $0x80 */
0xeb, 0xfe, /* 0: jmp 0b */
0
};
int sz_ia32_sigcode = sizeof(ia32_sigcode);
#ifdef COMPAT_43
int
ofreebsd32_sigreturn(struct thread *td, struct ofreebsd32_sigreturn_args *uap)
{
return (EOPNOTSUPP);
}
#endif
/*
* Signal sending has not been implemented on ia64. This causes
* the sigtramp code to not understand the arguments and the application
* will generally crash if it tries to handle a signal. Calling
* sendsig() means that at least untrapped signals will work.
*/
void
1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most changes in MD code are trivial, before this change, trapsignal and sendsig use discrete parameters, now they uses member fields of ksiginfo_t structure. For sendsig, this change allows us to pass POSIX realtime signal value to user code. 2. Remove cpu_thread_siginfo, it is no longer needed because we now always generate ksiginfo_t data and feed it to libpthread. 3. Add p_sigqueue to proc structure to hold shared signals which were blocked by all threads in the proc. 4. Add td_sigqueue to thread structure to hold all signals delivered to thread. 5. i386 and amd64 now return POSIX standard si_code, other arches will be fixed. 6. In this sigqueue implementation, pending signal set is kept as before, an extra siginfo list holds additional siginfo_t data for signals. kernel code uses psignal() still behavior as before, it won't be failed even under memory pressure, only exception is when deleting a signal, we should call sigqueue_delete to remove signal from sigqueue but not SIGDELSET. Current there is no kernel code will deliver a signal with additional data, so kernel should be as stable as before, a ksiginfo can carry more information, for example, allow signal to be delivered but throw away siginfo data if memory is not enough. SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can not be caught or masked. The sigqueue() syscall allows user code to queue a signal to target process, if resource is unavailable, EAGAIN will be returned as specification said. Just before thread exits, signal queue memory will be freed by sigqueue_flush. Current, all signals are allowed to be queued, not only realtime signals. Earlier patch reviewed by: jhb, deischen Tested on: i386, amd64
2005-10-14 12:43:47 +00:00
ia32_sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask)
{
1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most changes in MD code are trivial, before this change, trapsignal and sendsig use discrete parameters, now they uses member fields of ksiginfo_t structure. For sendsig, this change allows us to pass POSIX realtime signal value to user code. 2. Remove cpu_thread_siginfo, it is no longer needed because we now always generate ksiginfo_t data and feed it to libpthread. 3. Add p_sigqueue to proc structure to hold shared signals which were blocked by all threads in the proc. 4. Add td_sigqueue to thread structure to hold all signals delivered to thread. 5. i386 and amd64 now return POSIX standard si_code, other arches will be fixed. 6. In this sigqueue implementation, pending signal set is kept as before, an extra siginfo list holds additional siginfo_t data for signals. kernel code uses psignal() still behavior as before, it won't be failed even under memory pressure, only exception is when deleting a signal, we should call sigqueue_delete to remove signal from sigqueue but not SIGDELSET. Current there is no kernel code will deliver a signal with additional data, so kernel should be as stable as before, a ksiginfo can carry more information, for example, allow signal to be delivered but throw away siginfo data if memory is not enough. SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can not be caught or masked. The sigqueue() syscall allows user code to queue a signal to target process, if resource is unavailable, EAGAIN will be returned as specification said. Just before thread exits, signal queue memory will be freed by sigqueue_flush. Current, all signals are allowed to be queued, not only realtime signals. Earlier patch reviewed by: jhb, deischen Tested on: i386, amd64
2005-10-14 12:43:47 +00:00
sendsig(catcher, ksi, mask);
}
#ifdef COMPAT_FREEBSD4
int
freebsd4_freebsd32_sigreturn(struct thread *td, struct freebsd4_freebsd32_sigreturn_args *uap)
{
return (sys_sigreturn(td, (struct sigreturn_args *)uap));
}
#endif
int
freebsd32_sigreturn(struct thread *td, struct freebsd32_sigreturn_args *uap)
{
return (sys_sigreturn(td, (struct sigreturn_args *)uap));
}
void
ia32_setregs(struct thread *td, struct image_params *imgp, u_long stack)
{
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
struct trapframe *tf = td->td_frame;
vm_offset_t gdt, ldt;
u_int64_t codesel, datasel, ldtsel;
u_int64_t codeseg, dataseg, gdtseg, ldtseg;
struct segment_descriptor desc;
struct vmspace *vmspace = td->td_proc->p_vmspace;
struct sysentvec *sv;
sv = td->td_proc->p_sysent;
exec_setregs(td, imgp, stack);
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
/* Non-syscall frames are cleared by exec_setregs() */
if (tf->tf_flags & FRAME_SYSCALL) {
bzero(&tf->tf_scratch, sizeof(tf->tf_scratch));
bzero(&tf->tf_scratch_fp, sizeof(tf->tf_scratch_fp));
} else
tf->tf_special.ndirty = 0;
tf->tf_special.psr |= IA64_PSR_IS;
tf->tf_special.sp = stack;
/* Point the RSE backstore to something harmless. */
tf->tf_special.bspstore = (sv->sv_psstrings - sz_ia32_sigcode -
SPARE_USRSPACE + 15) & ~15;
codesel = LSEL(LUCODE_SEL, SEL_UPL);
datasel = LSEL(LUDATA_SEL, SEL_UPL);
ldtsel = GSEL(GLDT_SEL, SEL_UPL);
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
/* Setup ia32 segment registers. */
tf->tf_scratch.gr16 = (datasel << 48) | (datasel << 32) |
(datasel << 16) | datasel;
tf->tf_scratch.gr17 = (ldtsel << 32) | (datasel << 16) | codesel;
/*
* Build the GDT and LDT.
*/
gdt = sv->sv_usrstack;
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
vm_map_find(&vmspace->vm_map, 0, 0, &gdt, IA32_PAGE_SIZE << 1, 0,
VM_PROT_ALL, VM_PROT_ALL, 0);
ldt = gdt + IA32_PAGE_SIZE;
desc.sd_lolimit = 8*NLDT-1;
desc.sd_lobase = ldt & 0xffffff;
desc.sd_type = SDT_SYSLDT;
desc.sd_dpl = SEL_UPL;
desc.sd_p = 1;
desc.sd_hilimit = 0;
desc.sd_def32 = 0;
desc.sd_gran = 0;
desc.sd_hibase = ldt >> 24;
copyout(&desc, (caddr_t) gdt + 8*GLDT_SEL, sizeof(desc));
desc.sd_lolimit = ((sv->sv_usrstack >> 12) - 1) & 0xffff;
desc.sd_lobase = 0;
desc.sd_type = SDT_MEMERA;
desc.sd_dpl = SEL_UPL;
desc.sd_p = 1;
desc.sd_hilimit = ((sv->sv_usrstack >> 12) - 1) >> 16;
desc.sd_def32 = 1;
desc.sd_gran = 1;
desc.sd_hibase = 0;
copyout(&desc, (caddr_t) ldt + 8*LUCODE_SEL, sizeof(desc));
desc.sd_type = SDT_MEMRWA;
copyout(&desc, (caddr_t) ldt + 8*LUDATA_SEL, sizeof(desc));
codeseg = 0 /* base */
+ (((sv->sv_usrstack >> 12) - 1) << 32) /* limit */
+ ((long)SDT_MEMERA << 52)
+ ((long)SEL_UPL << 57)
+ (1L << 59) /* present */
+ (1L << 62) /* 32 bits */
+ (1L << 63); /* page granularity */
dataseg = 0 /* base */
+ (((sv->sv_usrstack >> 12) - 1) << 32) /* limit */
+ ((long)SDT_MEMRWA << 52)
+ ((long)SEL_UPL << 57)
+ (1L << 59) /* present */
+ (1L << 62) /* 32 bits */
+ (1L << 63); /* page granularity */
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
tf->tf_scratch.csd = codeseg;
tf->tf_scratch.ssd = dataseg;
tf->tf_scratch.gr24 = dataseg; /* ESD */
tf->tf_scratch.gr27 = dataseg; /* DSD */
tf->tf_scratch.gr28 = dataseg; /* FSD */
tf->tf_scratch.gr29 = dataseg; /* GSD */
gdtseg = gdt /* base */
+ ((8L*NGDT - 1) << 32) /* limit */
+ ((long)SDT_SYSNULL << 52)
+ ((long)SEL_UPL << 57)
+ (1L << 59) /* present */
+ (0L << 62) /* 16 bits */
+ (0L << 63); /* byte granularity */
ldtseg = ldt /* base */
+ ((8L*NLDT - 1) << 32) /* limit */
+ ((long)SDT_SYSLDT << 52)
+ ((long)SEL_UPL << 57)
+ (1L << 59) /* present */
+ (0L << 62) /* 16 bits */
+ (0L << 63); /* byte granularity */
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
tf->tf_scratch.gr30 = ldtseg; /* LDTD */
tf->tf_scratch.gr31 = gdtseg; /* GDTD */
/* Set ia32 control registers on this processor. */
ia64_set_cflg(CR0_PE | CR0_PG | ((long)(CR4_XMM | CR4_FXSR) << 32));
ia64_set_eflag(PSL_USER);
/* PS_STRINGS value for BSD/OS binaries. It is 0 for non-BSD/OS. */
tf->tf_scratch.gr11 = td->td_proc->p_sysent->sv_psstrings;
/*
* XXX - Linux emulator
* Make sure sure edx is 0x0 on entry. Linux binaries depend
* on it.
*/
td->td_retval[1] = 0;
}
Revamp of the syscall path, exception and context handling. The prime objectives are: o Implement a syscall path based on the epc inststruction (see sys/ia64/ia64/syscall.s). o Revisit the places were we need to save and restore registers and define those contexts in terms of the register sets (see sys/ia64/include/_regset.h). Secundairy objectives: o Remove the requirement to use contigmalloc for kernel stacks. o Better handling of the high FP registers for SMP systems. o Switch to the new cpu_switch() and cpu_throw() semantics. o Add a good unwinder to reconstruct contexts for the rare cases we need to (see sys/contrib/ia64/libuwx) Many files are affected by this change. Functionally it boils down to: o The EPC syscall doesn't preserve registers it does not need to preserve and places the arguments differently on the stack. This affects libc and truss. o The address of the kernel page directory (kptdir) had to be unstaticized for use by the nested TLB fault handler. The name has been changed to ia64_kptdir to avoid conflicts. The renaming affects libkvm. o The trapframe only contains the special registers and the scratch registers. For syscalls using the EPC syscall path no scratch registers are saved. This affects all places where the trapframe is accessed. Most notably the unaligned access handler, the signal delivery code and the debugger. o Context switching only partly saves the special registers and the preserved registers. This affects cpu_switch() and triggered the move to the new semantics, which additionally affects cpu_throw(). o The high FP registers are either in the PCB or on some CPU. context switching for them is done lazily. This affects trap(). o The mcontext has room for all registers, but not all of them have to be defined in all cases. This mostly affects signal delivery code now. The *context syscalls are as of yet still unimplemented. Many details went into the removal of the requirement to use contigmalloc for kernel stacks. The details are mostly CPU specific and limited to exception_save() and exception_restore(). The few places where we create, destroy or switch stacks were mostly simplified by not having to construct physical addresses and additionally saving the virtual addresses for later use. Besides more efficient context saving and restoring, which of course yields a noticable speedup, this also fixes the dreaded SMP bootup problem as a side-effect. The details of which are still not fully understood. This change includes all the necessary backward compatibility code to have it handle older userland binaries that use the break instruction for syscalls. Support for break-based syscalls has been pessimized in favor of a clean implementation. Due to the overall better performance of the kernel, this will still be notived as an improvement if it's noticed at all. Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
void
ia32_restorectx(struct pcb *pcb)
{
ia64_set_cflg(pcb->pcb_ia32_cflg);
ia64_set_eflag(pcb->pcb_ia32_eflag);
ia64_set_fcr(pcb->pcb_ia32_fcr);
ia64_set_fdr(pcb->pcb_ia32_fdr);
ia64_set_fir(pcb->pcb_ia32_fir);
ia64_set_fsr(pcb->pcb_ia32_fsr);
}
void
ia32_savectx(struct pcb *pcb)
{
pcb->pcb_ia32_cflg = ia64_get_cflg();
pcb->pcb_ia32_eflag = ia64_get_eflag();
pcb->pcb_ia32_fcr = ia64_get_fcr();
pcb->pcb_ia32_fdr = ia64_get_fdr();
pcb->pcb_ia32_fir = ia64_get_fir();
pcb->pcb_ia32_fsr = ia64_get_fsr();
}
int
freebsd32_getcontext(struct thread *td, struct freebsd32_getcontext_args *uap)
{
return (nosys(td, NULL));
}
int
freebsd32_setcontext(struct thread *td, struct freebsd32_setcontext_args *uap)
{
return (nosys(td, NULL));
}
int
freebsd32_swapcontext(struct thread *td, struct freebsd32_swapcontext_args *uap)
{
return (nosys(td, NULL));
}