d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d7a8d3868c
freebsd-nq/usr.bin/truss/mips-freebsd.c

140 lines
4.0 KiB
C
Raw Normal View History

Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
/*
Fix copyright spelling. PR: 139825 Submitted by: Ruslan Mahmatkhanov
2010-03-10 20:31:30 +00:00
* Copyright 1998 Sean Eric Fagan
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Sean Eric Fagan
* 4. Neither the name of the author may be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
/* FreeBSD/mips-specific system call handling. */
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
#include <sys/ptrace.h>
#include <sys/syscall.h>
#include <machine/frame.h>
#include <machine/reg.h>
#include <stdio.h>
Add support to libsysdecode for decoding system call names. A new sysdecode_syscallname() function accepts a system call code and returns a string of the corresponding name (or NULL if the code is unknown). To support different process ABIs, the new function accepts a value from a new sysdecode_abi enum as its first argument to select the ABI in use. Current ABIs supported include FREEBSD (native binaries), FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are supported by all platforms. In general, a given ABI is only supported if a platform can execute binaries for that ABI. To simplify the implementation, libsysdecode's build reuses the existing pre-generated files from the kernel source tree rather than duplicating new copies of said files during the build. kdump(1) and truss(1) now use these functions to map system call identifiers to names. For kdump(1), a new 'syscallname()' function consolidates duplicated code from ktrsyscall() and ktrsyscallret(). The Linux ABI no longer requires custom handling for ktrsyscall() and linux_ktrsyscall() has been removed as a result. Reviewed by: bdrewery Differential Revision: https://reviews.freebsd.org/D4823
2016-01-26 19:07:09 +00:00
#include <sysdecode.h>
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
#include "truss.h"
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
static int
mips_fetch_args(struct trussinfo *trussinfo, u_int narg)
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
{
struct ptrace_io_desc iorequest;
struct reg regs;
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
struct current_syscall *cs;
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
lwpid_t tid;
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
u_int i, reg;
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
tid = trussinfo->curthread->tid;
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
cs = &trussinfo->curthread->cs;
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
if (ptrace(PT_GETREGS, tid, (caddr_t)&regs, 0) < 0) {
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
fprintf(trussinfo->outfile, "-- CANNOT READ REGISTERS --\n");
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
return (-1);
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
}
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
/*
* FreeBSD has two special kinds of system call redirections --
* SYS_syscall, and SYS___syscall. The former is the old syscall()
* routine, basically; the latter is for quad-aligned arguments.
*
* The system call argument count and code from ptrace() already
* account for these, but we need to skip over the first argument.
*/
reg = A0;
switch (regs.r_regs[V0]) {
case SYS_syscall:
reg = A1;
break;
case SYS___syscall:
#if defined(__mips_n32) || defined(__mips_n64)
reg = A1;
#else
reg = A2;
#endif
break;
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
}
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
#if defined(__mips_n32) || defined(__mips_n64)
#define MAXREG A7
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
#else
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
#define MAXREG A3
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
#endif
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
for (i = 0; i < narg && reg <= MAXREG; i++, reg++)
cs->args[i] = regs.r_regs[reg];
if (narg > i) {
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
iorequest.piod_op = PIOD_READ_D;
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
iorequest.piod_offs = (void *)((uintptr_t)regs.r_regs[SP] +
4 * sizeof(cs->args[0]));
iorequest.piod_addr = &cs->args[i];
iorequest.piod_len = (narg - i) * sizeof(cs->args[0]);
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
ptrace(PT_IO, tid, (caddr_t)&iorequest, 0);
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
if (iorequest.piod_len == 0)
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
return (-1);
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
}
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
return (0);
Add preliminary support for truss on MIPS. It compiles, but has not been extensively tested. And the ELF64 stuff likely is not quite right... # There's a lot of cut-n-paste code here that could easily be # refactored, at least for FreeBSD syscalls.
2009-02-15 01:26:49 +00:00
}
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
static int
mips_fetch_retval(struct trussinfo *trussinfo, long *retval, int *errorp)
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
{
struct reg regs;
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
lwpid_t tid;
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
- Make truss thread-aware. Approved by: kib (mentor) MFC after: 2 weeks
2012-09-16 14:38:01 +00:00
tid = trussinfo->curthread->tid;
if (ptrace(PT_GETREGS, tid, (caddr_t)&regs, 0) < 0) {
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
fprintf(trussinfo->outfile, "-- CANNOT READ REGISTERS --\n");
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
return (-1);
}
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
/* XXX: Does not have special handling for __syscall(). */
retval[0] = regs.r_regs[V0];
retval[1] = regs.r_regs[V1];
*errorp = !!regs.r_regs[A3];
return (0);
}
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
Simplify syscall generation and ABI source file handling for the build. This is to make the Makefile more easily extendable for new ABIs. This also makes several other subtle changes: - The build now is given a list of ABIs to use based on the MACHINE_ARCH or MACHINE_CPUARCH. These ABIs have a related path in sys/ that is used to generate their syscalls. For each ABI to build check for a ABI.c, MACHINE_ARCH-ABI.c, or a MACHINE_CPUARCH-ABI.c. This matches the old behavior needed for archs such as powerpc* and mips*. - The ABI source file selection allows for simpler assignment of common ABIs such as "fbsd32" from sys/compat/freebsd32, or cloudabi64. - Expand 'fbsd' to 'freebsd' everywhere for consistency. - Split out the powerpc-fbsd.c file into a powerpc64-freebsd32.c to be more like the amd64-freebsd32.c file and to more easily allow the auto-generation of ABI handling to work. - Rename 'syscalls.h' to 'fbsd_syscalls.h' to lessen the ambiguity and avoid confusion with syscall.h (such as in r288997). - For non-native syscall header files, they are now renamed to be ABI_syscalls.h, where ABI is what ABI the Makefile is building. - Remove all of the makesyscalls config files. The "native" one being name i386.conf was a long outstanding bug. They were all the same except for the data they generated, so now it is just auto-generated as a build artifact. - The syscalls array is now fixed to be static in the syscalls header to remove the compiler warning about non-extern. This was worked around in the aarch64-fbsd.c file but not the others. - All syscall table names are now just 'syscallnames' since they don't need to be different as they are all static in their own ABI files. The alternative is to name them ABI_syscallnames which does not seem necessary. Reviewed by: ed, jhb MFC after: 3 weeks Differential Revision: https://reviews.freebsd.org/D3851
2015-10-13 18:23:51 +00:00
static struct procabi mips_freebsd = {
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
#ifdef __mips_n64
"FreeBSD ELF64",
#else
"FreeBSD ELF32",
#endif
Add support to libsysdecode for decoding system call names. A new sysdecode_syscallname() function accepts a system call code and returns a string of the corresponding name (or NULL if the code is unknown). To support different process ABIs, the new function accepts a value from a new sysdecode_abi enum as its first argument to select the ABI in use. Current ABIs supported include FREEBSD (native binaries), FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are supported by all platforms. In general, a given ABI is only supported if a platform can execute binaries for that ABI. To simplify the implementation, libsysdecode's build reuses the existing pre-generated files from the kernel source tree rather than duplicating new copies of said files during the build. kdump(1) and truss(1) now use these functions to map system call identifiers to names. For kdump(1), a new 'syscallname()' function consolidates duplicated code from ktrsyscall() and ktrsyscallret(). The Linux ABI no longer requires custom handling for ktrsyscall() and linux_ktrsyscall() has been removed as a result. Reviewed by: bdrewery Differential Revision: https://reviews.freebsd.org/D4823
2016-01-26 19:07:09 +00:00
FREEBSD,
Several changes to truss. - Refactor the interface between the ABI-independent code and the ABI-specific backends. The backends now provide smaller hooks to fetch system call arguments and return values. The rest of the system call entry and exit handling that was previously duplicated among all the backends has been moved to one place. - Merge the loop when waiting for an event with the loop for handling stops. This also means not emulating a procfs-like interface on top of ptrace(). Instead, use a single event loop that fetches process events via waitid(). Among other things this allows us to report the full 32-bit exit value. - Use PT_FOLLOW_FORK to follow new child processes instead of forking a new truss process for each new child. This allows one truss process to monitor a tree of processes and truss -c should now display one total for the entire tree instead of separate summaries per process. - Use the recently added fields to ptrace_lwpinfo to determine the current system call number and argument count. The latter is especially useful and fixes a regression since the conversion from procfs. truss now generally prints the correct number of arguments for most system calls rather than printing extra arguments for any call not listed in the table in syscalls.c. - Actually check the new ABI when processes call exec. The comments claimed that this happened but it was not being done (perhaps this was another regression in the conversion to ptrace()). If the new ABI after exec is not supported, truss detaches from the process. If truss does not support the ABI for a newly executed process the process is killed before it returns from exec. - Along with the refactor, teach the various ABI-specific backends to fetch both return values, not just the first. Use this to properly report the full 64-bit return value from lseek(). In addition, the handler for "pipe" now pulls the pair of descriptors out of the return values (which is the true kernel system call interface) but displays them as an argument (which matches the interface exported by libc). - Each ABI handler adds entries to a linker set rather than requiring a statically defined table of handlers in main.c. - The arm and mips system call fetching code was changed to follow the same pattern as amd64 (and the in-kernel handler) of fetching register arguments first and then reading any remaining arguments from the stack. This should fix indirect system call arguments on at least arm. - The mipsn32 and n64 ABIs will now look for arguments in A4 through A7. - Use register %ebp for the 6th system call argument for Linux/i386 ABIs to match the in-kernel argument fetch code. - For powerpc binaries on a powerpc64 system, fetch the extra arguments on the stack as 32-bit values that are then copied into the 64-bit argument array instead of reading the 32-bit values directly into the 64-bit array. Reviewed by: kib (earlier version) Tested on: amd64 (FreeBSD/amd64 & i386), i386, arm (earlier version) Tested on: powerpc64 (FreeBSD/powerpc64 & powerpc) MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D3575
2015-09-30 19:13:32 +00:00
mips_fetch_args,
mips_fetch_retval
};
- Style(9) cleanup. Approved by: kib (mentor)
2012-09-02 11:03:18 +00:00
Simplify syscall generation and ABI source file handling for the build. This is to make the Makefile more easily extendable for new ABIs. This also makes several other subtle changes: - The build now is given a list of ABIs to use based on the MACHINE_ARCH or MACHINE_CPUARCH. These ABIs have a related path in sys/ that is used to generate their syscalls. For each ABI to build check for a ABI.c, MACHINE_ARCH-ABI.c, or a MACHINE_CPUARCH-ABI.c. This matches the old behavior needed for archs such as powerpc* and mips*. - The ABI source file selection allows for simpler assignment of common ABIs such as "fbsd32" from sys/compat/freebsd32, or cloudabi64. - Expand 'fbsd' to 'freebsd' everywhere for consistency. - Split out the powerpc-fbsd.c file into a powerpc64-freebsd32.c to be more like the amd64-freebsd32.c file and to more easily allow the auto-generation of ABI handling to work. - Rename 'syscalls.h' to 'fbsd_syscalls.h' to lessen the ambiguity and avoid confusion with syscall.h (such as in r288997). - For non-native syscall header files, they are now renamed to be ABI_syscalls.h, where ABI is what ABI the Makefile is building. - Remove all of the makesyscalls config files. The "native" one being name i386.conf was a long outstanding bug. They were all the same except for the data they generated, so now it is just auto-generated as a build artifact. - The syscalls array is now fixed to be static in the syscalls header to remove the compiler warning about non-extern. This was worked around in the aarch64-fbsd.c file but not the others. - All syscall table names are now just 'syscallnames' since they don't need to be different as they are all static in their own ABI files. The alternative is to name them ABI_syscallnames which does not seem necessary. Reviewed by: ed, jhb MFC after: 3 weeks Differential Revision: https://reviews.freebsd.org/D3851
2015-10-13 18:23:51 +00:00
PROCABI(mips_freebsd);
Reference in New Issue Copy Permalink