freebsd-nq/sys/dev/sfxge/common/hunt_nic.c

/*-
 * Copyright (c) 2012-2015 Solarflare Communications Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * The views and conclusions contained in the software and documentation are
 * those of the authors and should not be interpreted as representing official
 * policies, either expressed or implied, of the FreeBSD Project.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include "efx.h"
#include "efx_impl.h"
#if EFSYS_OPT_MON_MCDI
#include "mcdi_mon.h"
#endif

#if EFSYS_OPT_HUNTINGTON

#include "ef10_tlv_layout.h"

static	__checkReturn	efx_rc_t
hunt_nic_get_required_pcie_bandwidth(
	__in		efx_nic_t *enp,
	__out		uint32_t *bandwidth_mbpsp)
{
	uint32_t port_modes;
	uint32_t max_port_mode;
	uint32_t bandwidth;
	efx_rc_t rc;

	/*
	 * On Huntington, the firmware may not give us the current port mode, so
	 * we need to go by the set of available port modes and assume the most
	 * capable mode is in use.
	 */

	if ((rc = efx_mcdi_get_port_modes(enp, &port_modes, NULL)) != 0) {
		/* No port mode info available */
		bandwidth = 0;
		goto out;
	}

	if (port_modes & (1 << TLV_PORT_MODE_40G_40G)) {
		/*
		 * This needs the full PCIe bandwidth (and could use
		 * more) - roughly 64 Gbit/s for 8 lanes of Gen3.
		 */
		if ((rc = efx_nic_calculate_pcie_link_bandwidth(8,
			    EFX_PCIE_LINK_SPEED_GEN3, &bandwidth)) != 0)
			goto fail1;
	} else {
		if (port_modes & (1 << TLV_PORT_MODE_40G)) {
			max_port_mode = TLV_PORT_MODE_40G;
		} else if (port_modes & (1 << TLV_PORT_MODE_10G_10G_10G_10G)) {
			max_port_mode = TLV_PORT_MODE_10G_10G_10G_10G;
		} else {
			/* Assume two 10G ports */
			max_port_mode = TLV_PORT_MODE_10G_10G;
		}

		if ((rc = ef10_nic_get_port_mode_bandwidth(max_port_mode,
							    &bandwidth)) != 0)
		    goto fail2;
	}

out:
	*bandwidth_mbpsp = bandwidth;

	return (0);

fail2:
	EFSYS_PROBE(fail2);
fail1:
	EFSYS_PROBE1(fail1, efx_rc_t, rc);

	return (rc);
}

	__checkReturn	efx_rc_t
hunt_board_cfg(
	__in		efx_nic_t *enp)
{
	efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
	efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
	uint8_t mac_addr[6];
	uint32_t board_type = 0;
	ef10_link_state_t els;
	efx_port_t *epp = &(enp->en_port);
	uint32_t port;
	uint32_t pf;
	uint32_t vf;
	uint32_t mask;
	uint32_t flags;
	uint32_t sysclk;
	uint32_t base, nvec;
	uint32_t bandwidth;
	efx_rc_t rc;

	if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
		goto fail1;

	/*
	 * NOTE: The MCDI protocol numbers ports from zero.
	 * The common code MCDI interface numbers ports from one.
	 */
	emip->emi_port = port + 1;

	if ((rc = ef10_external_port_mapping(enp, port,
		    &encp->enc_external_port)) != 0)
		goto fail2;

	/*
	 * Get PCIe function number from firmware (used for
	 * per-function privilege and dynamic config info).
	 *  - PCIe PF: pf = PF number, vf = 0xffff.
	 *  - PCIe VF: pf = parent PF, vf = VF number.
	 */
	if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
		goto fail3;

	encp->enc_pf = pf;
	encp->enc_vf = vf;

	/* MAC address for this function */
	if (EFX_PCI_FUNCTION_IS_PF(encp)) {
		rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
		if ((rc == 0) && (mac_addr[0] & 0x02)) {
			/*
			 * If the static config does not include a global MAC
			 * address pool then the board may return a locally
			 * administered MAC address (this should only happen on
			 * incorrectly programmed boards).
			 */
			rc = EINVAL;
		}
	} else {
		rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
	}
	if (rc != 0)
		goto fail4;

	EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);

	/* Board configuration */
	rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
	if (rc != 0) {
		/* Unprivileged functions may not be able to read board cfg */
		if (rc == EACCES)
			board_type = 0;
		else
			goto fail5;
	}

	encp->enc_board_type = board_type;
	encp->enc_clk_mult = 1; /* not used for Huntington */

	/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
	if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
		goto fail6;

	/* Obtain the default PHY advertised capabilities */
	if ((rc = ef10_phy_get_link(enp, &els)) != 0)
		goto fail7;
	epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
	epp->ep_adv_cap_mask = els.els_adv_cap_mask;

	/*
	 * Enable firmware workarounds for hardware errata.
	 * Expected responses are:
	 *  - 0 (zero):
	 *	Success: workaround enabled or disabled as requested.
	 *  - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
	 *	Firmware does not support the MC_CMD_WORKAROUND request.
	 *	(assume that the workaround is not supported).
	 *  - MC_CMD_ERR_ENOENT (reported as ENOENT):
	 *	Firmware does not support the requested workaround.
	 *  - MC_CMD_ERR_EPERM  (reported as EACCES):
	 *	Unprivileged function cannot enable/disable workarounds.
	 *
	 * See efx_mcdi_request_errcode() for MCDI error translations.
	 */

	/*
	 * If the bug35388 workaround is enabled, then use an indirect access
	 * method to avoid unsafe EVQ writes.
	 */
	rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG35388, B_TRUE,
	    NULL);
	if ((rc == 0) || (rc == EACCES))
		encp->enc_bug35388_workaround = B_TRUE;
	else if ((rc == ENOTSUP) || (rc == ENOENT))
		encp->enc_bug35388_workaround = B_FALSE;
	else
		goto fail8;

	/*
	 * If the bug41750 workaround is enabled, then do not test interrupts,
	 * as the test will fail (seen with Greenport controllers).
	 */
	rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG41750, B_TRUE,
	    NULL);
	if (rc == 0) {
		encp->enc_bug41750_workaround = B_TRUE;
	} else if (rc == EACCES) {
		/* Assume a controller with 40G ports needs the workaround. */
		if (epp->ep_default_adv_cap_mask & EFX_PHY_CAP_40000FDX)
			encp->enc_bug41750_workaround = B_TRUE;
		else
			encp->enc_bug41750_workaround = B_FALSE;
	} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
		encp->enc_bug41750_workaround = B_FALSE;
	} else {
		goto fail9;
	}
	if (EFX_PCI_FUNCTION_IS_VF(encp)) {
		/* Interrupt testing does not work for VFs. See bug50084. */
		encp->enc_bug41750_workaround = B_TRUE;
	}

	/*
	 * If the bug26807 workaround is enabled, then firmware has enabled
	 * support for chained multicast filters. Firmware will reset (FLR)
	 * functions which have filters in the hardware filter table when the
	 * workaround is enabled/disabled.
	 *
	 * We must recheck if the workaround is enabled after inserting the
	 * first hardware filter, in case it has been changed since this check.
	 */
	rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG26807,
	    B_TRUE, &flags);
	if (rc == 0) {
		encp->enc_bug26807_workaround = B_TRUE;
		if (flags & (1 << MC_CMD_WORKAROUND_EXT_OUT_FLR_DONE_LBN)) {
			/*
			 * Other functions had installed filters before the
			 * workaround was enabled, and they have been reset
			 * by firmware.
			 */
			EFSYS_PROBE(bug26807_workaround_flr_done);
			/* FIXME: bump MC warm boot count ? */
		}
	} else if (rc == EACCES) {
		/*
		 * Unprivileged functions cannot enable the workaround in older
		 * firmware.
		 */
		encp->enc_bug26807_workaround = B_FALSE;
	} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
		encp->enc_bug26807_workaround = B_FALSE;
	} else {
		goto fail10;
	}

	/* Get sysclk frequency (in MHz). */
	if ((rc = efx_mcdi_get_clock(enp, &sysclk)) != 0)
		goto fail11;

	/*
	 * The timer quantum is 1536 sysclk cycles, documented for the
	 * EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
	 */
	encp->enc_evq_timer_quantum_ns = 1536000UL / sysclk; /* 1536 cycles */
	if (encp->enc_bug35388_workaround) {
		encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
		ERF_DD_EVQ_IND_TIMER_VAL_WIDTH) / 1000;
	} else {
		encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
		FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
	}

	/* Check capabilities of running datapath firmware */
	if ((rc = ef10_get_datapath_caps(enp)) != 0)
	    goto fail12;

	/* Alignment for receive packet DMA buffers */
	encp->enc_rx_buf_align_start = 1;
	encp->enc_rx_buf_align_end = 64; /* RX DMA end padding */

	/* Alignment for WPTR updates */
	encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;

	/*
	 * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
	 * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
	 * resources (allocated to this PCIe function), which is zero until
	 * after we have allocated VIs.
	 */
	encp->enc_evq_limit = 1024;
	encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
	encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;

	encp->enc_buftbl_limit = 0xFFFFFFFF;

	encp->enc_piobuf_limit = HUNT_PIOBUF_NBUFS;
	encp->enc_piobuf_size = HUNT_PIOBUF_SIZE;
	encp->enc_piobuf_min_alloc_size = HUNT_MIN_PIO_ALLOC_SIZE;

	/*
	 * Get the current privilege mask. Note that this may be modified
	 * dynamically, so this value is informational only. DO NOT use
	 * the privilege mask to check for sufficient privileges, as that
	 * can result in time-of-check/time-of-use bugs.
	 */
	if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
		goto fail13;
	encp->enc_privilege_mask = mask;

	/* Get interrupt vector limits */
	if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
		if (EFX_PCI_FUNCTION_IS_PF(encp))
			goto fail14;

		/* Ignore error (cannot query vector limits from a VF). */
		base = 0;
		nvec = 1024;
	}
	encp->enc_intr_vec_base = base;
	encp->enc_intr_limit = nvec;

	/*
	 * Maximum number of bytes into the frame the TCP header can start for
	 * firmware assisted TSO to work.
	 */
	encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;

	if ((rc = hunt_nic_get_required_pcie_bandwidth(enp, &bandwidth)) != 0)
		goto fail15;
	encp->enc_required_pcie_bandwidth_mbps = bandwidth;

	/* All Huntington devices have a PCIe Gen3, 8 lane connector */
	encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;

	return (0);

fail15:
	EFSYS_PROBE(fail15);
fail14:
	EFSYS_PROBE(fail14);
fail13:
	EFSYS_PROBE(fail13);
fail12:
	EFSYS_PROBE(fail12);
fail11:
	EFSYS_PROBE(fail11);
fail10:
	EFSYS_PROBE(fail10);
fail9:
	EFSYS_PROBE(fail9);
fail8:
	EFSYS_PROBE(fail8);
fail7:
	EFSYS_PROBE(fail7);
fail6:
	EFSYS_PROBE(fail6);
fail5:
	EFSYS_PROBE(fail5);
fail4:
	EFSYS_PROBE(fail4);
fail3:
	EFSYS_PROBE(fail3);
fail2:
	EFSYS_PROBE(fail2);
fail1:
	EFSYS_PROBE1(fail1, efx_rc_t, rc);

	return (rc);
}


#endif	/* EFSYS_OPT_HUNTINGTON */