Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
/* $NetBSD: uipaq.c,v 1.4 2006/11/16 01:33:27 christos Exp $ */
|
|
|
|
|
/* $OpenBSD: uipaq.c,v 1.1 2005/06/17 23:50:33 deraadt Exp $ */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Copyright (c) 2000-2005 The NetBSD Foundation, Inc.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
|
|
|
|
* Carlstedt Research & Technology.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* iPAQ driver
|
|
|
|
|
*
|
|
|
|
|
* 19 July 2003: Incorporated changes suggested by Sam Lawrance from
|
|
|
|
|
* the uppc module
|
|
|
|
|
*
|
|
|
|
|
*
|
|
|
|
|
* Contact isis@cs.umd.edu if you have any questions/comments about this driver
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2009-06-23 02:19:59 +00:00
|
|
|
#include <sys/stdint.h>
|
|
|
|
|
#include <sys/stddef.h>
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/queue.h>
|
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
#include <sys/bus.h>
|
|
|
|
|
#include <sys/module.h>
|
|
|
|
|
#include <sys/lock.h>
|
|
|
|
|
#include <sys/mutex.h>
|
|
|
|
|
#include <sys/condvar.h>
|
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
#include <sys/sx.h>
|
|
|
|
|
#include <sys/unistd.h>
|
|
|
|
|
#include <sys/callout.h>
|
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
|
#include <sys/priv.h>
|
|
|
|
|
|
2009-02-23 18:31:00 +00:00
|
|
|
#include <dev/usb/usb.h>
|
2009-06-23 02:19:59 +00:00
|
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
|
#include <dev/usb/usbdi_util.h>
|
2009-02-23 18:31:00 +00:00
|
|
|
#include <dev/usb/usb_cdc.h>
|
2009-06-23 02:19:59 +00:00
|
|
|
#include "usbdevs.h"
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
#define USB_DEBUG_VAR usb_debug
|
2009-02-23 18:31:00 +00:00
|
|
|
#include <dev/usb/usb_debug.h>
|
|
|
|
|
#include <dev/usb/usb_process.h>
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-02-23 18:31:00 +00:00
|
|
|
#include <dev/usb/serial/usb_serial.h>
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
#define UIPAQ_CONFIG_INDEX 0 /* config number 1 */
|
|
|
|
|
#define UIPAQ_IFACE_INDEX 0
|
|
|
|
|
|
|
|
|
|
#define UIPAQ_BUF_SIZE 1024
|
2009-01-15 02:35:40 +00:00
|
|
|
|
|
|
|
|
enum {
|
|
|
|
|
UIPAQ_BULK_DT_WR,
|
|
|
|
|
UIPAQ_BULK_DT_RD,
|
2009-02-09 22:05:25 +00:00
|
|
|
UIPAQ_N_TRANSFER,
|
2009-01-15 02:35:40 +00:00
|
|
|
};
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
struct uipaq_softc {
|
2009-05-28 17:36:36 +00:00
|
|
|
struct ucom_super_softc sc_super_ucom;
|
|
|
|
|
struct ucom_softc sc_ucom;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_xfer *sc_xfer[UIPAQ_N_TRANSFER];
|
|
|
|
|
struct usb_device *sc_udev;
|
2009-03-02 02:44:10 +00:00
|
|
|
struct mtx sc_mtx;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
uint16_t sc_line;
|
|
|
|
|
|
|
|
|
|
uint8_t sc_lsr; /* local status register */
|
|
|
|
|
uint8_t sc_msr; /* modem status register */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static device_probe_t uipaq_probe;
|
|
|
|
|
static device_attach_t uipaq_attach;
|
|
|
|
|
static device_detach_t uipaq_detach;
|
2012-08-15 15:42:57 +00:00
|
|
|
static void uipaq_free_softc(struct uipaq_softc *);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-05-29 18:46:57 +00:00
|
|
|
static usb_callback_t uipaq_write_callback;
|
|
|
|
|
static usb_callback_t uipaq_read_callback;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2012-08-10 15:29:41 +00:00
|
|
|
static void uipaq_free(struct ucom_softc *);
|
2009-05-28 17:36:36 +00:00
|
|
|
static void uipaq_start_read(struct ucom_softc *);
|
|
|
|
|
static void uipaq_stop_read(struct ucom_softc *);
|
|
|
|
|
static void uipaq_start_write(struct ucom_softc *);
|
|
|
|
|
static void uipaq_stop_write(struct ucom_softc *);
|
|
|
|
|
static void uipaq_cfg_set_dtr(struct ucom_softc *, uint8_t);
|
|
|
|
|
static void uipaq_cfg_set_rts(struct ucom_softc *, uint8_t);
|
|
|
|
|
static void uipaq_cfg_set_break(struct ucom_softc *, uint8_t);
|
2009-09-28 08:13:50 +00:00
|
|
|
static void uipaq_poll(struct ucom_softc *ucom);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-05-28 17:36:36 +00:00
|
|
|
static const struct usb_config uipaq_config_data[UIPAQ_N_TRANSFER] = {
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-01-15 02:35:40 +00:00
|
|
|
[UIPAQ_BULK_DT_WR] = {
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
.type = UE_BULK,
|
|
|
|
|
.endpoint = UE_ADDR_ANY,
|
|
|
|
|
.direction = UE_DIR_OUT,
|
2009-04-05 18:20:38 +00:00
|
|
|
.bufsize = UIPAQ_BUF_SIZE,
|
|
|
|
|
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
|
|
|
|
|
.callback = &uipaq_write_callback,
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
},
|
|
|
|
|
|
2009-01-15 02:35:40 +00:00
|
|
|
[UIPAQ_BULK_DT_RD] = {
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
.type = UE_BULK,
|
|
|
|
|
.endpoint = UE_ADDR_ANY,
|
|
|
|
|
.direction = UE_DIR_IN,
|
2009-04-05 18:20:38 +00:00
|
|
|
.bufsize = UIPAQ_BUF_SIZE,
|
|
|
|
|
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
|
|
|
|
|
.callback = &uipaq_read_callback,
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
2009-05-28 17:36:36 +00:00
|
|
|
static const struct ucom_callback uipaq_callback = {
|
2009-06-15 01:02:43 +00:00
|
|
|
.ucom_cfg_set_dtr = &uipaq_cfg_set_dtr,
|
|
|
|
|
.ucom_cfg_set_rts = &uipaq_cfg_set_rts,
|
|
|
|
|
.ucom_cfg_set_break = &uipaq_cfg_set_break,
|
|
|
|
|
.ucom_start_read = &uipaq_start_read,
|
|
|
|
|
.ucom_stop_read = &uipaq_stop_read,
|
|
|
|
|
.ucom_start_write = &uipaq_start_write,
|
|
|
|
|
.ucom_stop_write = &uipaq_stop_write,
|
2009-09-28 08:13:50 +00:00
|
|
|
.ucom_poll = &uipaq_poll,
|
2012-08-10 15:29:41 +00:00
|
|
|
.ucom_free = &uipaq_free,
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Much of this list is generated from lists of other drivers that
|
|
|
|
|
* support the same hardware. Numeric values are used where no usbdevs
|
|
|
|
|
* entries exist.
|
|
|
|
|
*/
|
2011-06-24 02:30:02 +00:00
|
|
|
static const STRUCT_USB_HOST_ID uipaq_devs[] = {
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
/* Socket USB Sync */
|
|
|
|
|
{USB_VPI(0x0104, 0x00be, 0)},
|
|
|
|
|
/* USB Sync 0301 */
|
|
|
|
|
{USB_VPI(0x04ad, 0x0301, 0)},
|
|
|
|
|
/* USB Sync 0302 */
|
|
|
|
|
{USB_VPI(0x04ad, 0x0302, 0)},
|
|
|
|
|
/* USB Sync 0303 */
|
|
|
|
|
{USB_VPI(0x04ad, 0x0303, 0)},
|
|
|
|
|
/* GPS Pocket PC USB Sync */
|
|
|
|
|
{USB_VPI(0x04ad, 0x0306, 0)},
|
|
|
|
|
/* HHP PDT */
|
|
|
|
|
{USB_VPI(0x0536, 0x01a0, 0)},
|
|
|
|
|
/* Intermec Mobile Computer */
|
|
|
|
|
{USB_VPI(0x067e, 0x1001, 0)},
|
|
|
|
|
/* Linkup Systems USB Sync */
|
|
|
|
|
{USB_VPI(0x094b, 0x0001, 0)},
|
|
|
|
|
/* BCOM USB Sync 0065 */
|
|
|
|
|
{USB_VPI(0x0960, 0x0065, 0)},
|
|
|
|
|
/* BCOM USB Sync 0066 */
|
|
|
|
|
{USB_VPI(0x0960, 0x0066, 0)},
|
|
|
|
|
/* BCOM USB Sync 0067 */
|
|
|
|
|
{USB_VPI(0x0960, 0x0067, 0)},
|
|
|
|
|
/* Portatec USB Sync */
|
|
|
|
|
{USB_VPI(0x0961, 0x0010, 0)},
|
|
|
|
|
/* Trimble GeoExplorer */
|
|
|
|
|
{USB_VPI(0x099e, 0x0052, 0)},
|
|
|
|
|
/* TDS Data Collector */
|
|
|
|
|
{USB_VPI(0x099e, 0x4000, 0)},
|
|
|
|
|
/* Motorola iDEN Smartphone */
|
|
|
|
|
{USB_VPI(0x0c44, 0x03a2, 0)},
|
|
|
|
|
/* Cesscom Luxian Series */
|
|
|
|
|
{USB_VPI(0x0c8e, 0x6000, 0)},
|
|
|
|
|
/* Motorola PowerPad Pocket PCDevice */
|
|
|
|
|
{USB_VPI(0x0cad, 0x9001, 0)},
|
|
|
|
|
/* Freedom Scientific USB Sync */
|
|
|
|
|
{USB_VPI(0x0f4e, 0x0200, 0)},
|
|
|
|
|
/* Cyberbank USB Sync */
|
|
|
|
|
{USB_VPI(0x0f98, 0x0201, 0)},
|
|
|
|
|
/* Wistron USB Sync */
|
|
|
|
|
{USB_VPI(0x0fb8, 0x3001, 0)},
|
|
|
|
|
/* Wistron USB Sync */
|
|
|
|
|
{USB_VPI(0x0fb8, 0x3002, 0)},
|
|
|
|
|
/* Wistron USB Sync */
|
|
|
|
|
{USB_VPI(0x0fb8, 0x3003, 0)},
|
|
|
|
|
/* Wistron USB Sync */
|
|
|
|
|
{USB_VPI(0x0fb8, 0x4001, 0)},
|
|
|
|
|
/* E-TEN USB Sync */
|
|
|
|
|
{USB_VPI(0x1066, 0x00ce, 0)},
|
|
|
|
|
/* E-TEN P3XX Pocket PC */
|
|
|
|
|
{USB_VPI(0x1066, 0x0300, 0)},
|
|
|
|
|
/* E-TEN P5XX Pocket PC */
|
|
|
|
|
{USB_VPI(0x1066, 0x0500, 0)},
|
|
|
|
|
/* E-TEN P6XX Pocket PC */
|
|
|
|
|
{USB_VPI(0x1066, 0x0600, 0)},
|
|
|
|
|
/* E-TEN P7XX Pocket PC */
|
|
|
|
|
{USB_VPI(0x1066, 0x0700, 0)},
|
|
|
|
|
/* Psion Teklogix Sync 753x */
|
|
|
|
|
{USB_VPI(0x1114, 0x0001, 0)},
|
|
|
|
|
/* Psion Teklogix Sync netBookPro */
|
|
|
|
|
{USB_VPI(0x1114, 0x0004, 0)},
|
|
|
|
|
/* Psion Teklogix Sync 7525 */
|
|
|
|
|
{USB_VPI(0x1114, 0x0006, 0)},
|
|
|
|
|
/* VES USB Sync */
|
|
|
|
|
{USB_VPI(0x1182, 0x1388, 0)},
|
|
|
|
|
/* Rugged Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(0x11d9, 0x1002, 0)},
|
|
|
|
|
/* Rugged Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(0x11d9, 0x1003, 0)},
|
|
|
|
|
/* USB Sync 03 */
|
|
|
|
|
{USB_VPI(0x1231, 0xce01, 0)},
|
|
|
|
|
/* USB Sync 03 */
|
|
|
|
|
{USB_VPI(0x1231, 0xce02, 0)},
|
|
|
|
|
/* Mio DigiWalker PPC StrongARM */
|
|
|
|
|
{USB_VPI(0x3340, 0x011c, 0)},
|
|
|
|
|
/* Mio DigiWalker 338 */
|
|
|
|
|
{USB_VPI(0x3340, 0x0326, 0)},
|
|
|
|
|
/* Mio DigiWalker 338 */
|
|
|
|
|
{USB_VPI(0x3340, 0x0426, 0)},
|
|
|
|
|
/* Mio DigiWalker USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x043a, 0)},
|
|
|
|
|
/* MiTAC USB Sync 528 */
|
|
|
|
|
{USB_VPI(0x3340, 0x051c, 0)},
|
|
|
|
|
/* Mio DigiWalker SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x053a, 0)},
|
|
|
|
|
/* MiTAC USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x071c, 0)},
|
|
|
|
|
/* Generic PPC StrongARM */
|
|
|
|
|
{USB_VPI(0x3340, 0x0b1c, 0)},
|
|
|
|
|
/* Generic PPC USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x0e3a, 0)},
|
|
|
|
|
/* Itautec USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x0f1c, 0)},
|
|
|
|
|
/* Generic SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x0f3a, 0)},
|
|
|
|
|
/* Itautec USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x1326, 0)},
|
|
|
|
|
/* YAKUMO USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x191c, 0)},
|
|
|
|
|
/* Vobis USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x2326, 0)},
|
|
|
|
|
/* MEDION Winodws Moble USB Sync */
|
|
|
|
|
{USB_VPI(0x3340, 0x3326, 0)},
|
|
|
|
|
/* Legend USB Sync */
|
|
|
|
|
{USB_VPI(0x3708, 0x20ce, 0)},
|
|
|
|
|
/* Lenovo USB Sync */
|
|
|
|
|
{USB_VPI(0x3708, 0x21ce, 0)},
|
|
|
|
|
/* Mobile Media Technology USB Sync */
|
|
|
|
|
{USB_VPI(0x4113, 0x0210, 0)},
|
|
|
|
|
/* Mobile Media Technology USB Sync */
|
|
|
|
|
{USB_VPI(0x4113, 0x0211, 0)},
|
|
|
|
|
/* Mobile Media Technology USB Sync */
|
|
|
|
|
{USB_VPI(0x4113, 0x0400, 0)},
|
|
|
|
|
/* Mobile Media Technology USB Sync */
|
|
|
|
|
{USB_VPI(0x4113, 0x0410, 0)},
|
|
|
|
|
/* Smartphone */
|
|
|
|
|
{USB_VPI(0x4505, 0x0010, 0)},
|
|
|
|
|
/* SAGEM Wireless Assistant */
|
|
|
|
|
{USB_VPI(0x5e04, 0xce00, 0)},
|
|
|
|
|
/* c10 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ACER, 0x1631, 0)},
|
|
|
|
|
/* c20 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ACER, 0x1632, 0)},
|
|
|
|
|
/* Acer n10 Handheld USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ACER, 0x16e1, 0)},
|
|
|
|
|
/* Acer n20 Handheld USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ACER, 0x16e2, 0)},
|
|
|
|
|
/* Acer n30 Handheld USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ACER, 0x16e3, 0)},
|
|
|
|
|
/* ASUS USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, 0x4200, 0)},
|
|
|
|
|
/* ASUS USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, 0x4201, 0)},
|
|
|
|
|
/* ASUS USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, 0x4202, 0)},
|
|
|
|
|
/* ASUS USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, 0x9200, 0)},
|
|
|
|
|
/* ASUS USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, 0x9202, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_P535, 0)},
|
|
|
|
|
/* CASIO USB Sync 2001 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_CASIO, 0x2001, 0)},
|
|
|
|
|
/* CASIO USB Sync 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_CASIO, 0x2003, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_CASIO, USB_PRODUCT_CASIO_BE300, 0)},
|
|
|
|
|
/* MyGuide 7000 XL USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_COMPAL, 0x0531, 0)},
|
|
|
|
|
/* Compaq iPAQ USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_COMPAQ, 0x0032, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQPOCKETPC, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4001, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4002, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4003, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4004, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4005, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4006, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4007, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4008, 0)},
|
|
|
|
|
/* Dell Axim USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_DELL, 0x4009, 0)},
|
|
|
|
|
/* Fujitsu Siemens Computers USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_FSC, 0x1001, 0)},
|
|
|
|
|
/* FUJITSU USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_FUJITSU, 0x1058, 0)},
|
|
|
|
|
/* FUJITSU USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_FUJITSU, 0x1079, 0)},
|
|
|
|
|
/* Askey USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_GIGASET, 0x0601, 0)},
|
|
|
|
|
/* Hitachi USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HITACHI, 0x0014, 0)},
|
|
|
|
|
/* HP USB Sync 1612 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x1216, 0)},
|
|
|
|
|
/* HP USB Sync 1620 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x2016, 0)},
|
|
|
|
|
/* HP USB Sync 1621 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x2116, 0)},
|
|
|
|
|
/* HP USB Sync 1622 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x2216, 0)},
|
|
|
|
|
/* HP USB Sync 1630 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x3016, 0)},
|
|
|
|
|
/* HP USB Sync 1631 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x3116, 0)},
|
|
|
|
|
/* HP USB Sync 1632 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x3216, 0)},
|
|
|
|
|
/* HP USB Sync 1640 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x4016, 0)},
|
|
|
|
|
/* HP USB Sync 1641 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x4116, 0)},
|
|
|
|
|
/* HP USB Sync 1642 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x4216, 0)},
|
|
|
|
|
/* HP USB Sync 1650 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x5016, 0)},
|
|
|
|
|
/* HP USB Sync 1651 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x5116, 0)},
|
|
|
|
|
/* HP USB Sync 1652 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, 0x5216, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, USB_PRODUCT_HP_2215, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_HP, USB_PRODUCT_HP_568J, 0)},
|
|
|
|
|
/* HTC USB Modem */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x00cf, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a01, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a02, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a03, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a04, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a05, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a06, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a07, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a08, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a09, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0a, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0b, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0c, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0d, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0e, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a0f, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a10, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a11, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a12, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a13, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a14, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a15, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a16, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a17, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a18, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a19, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1a, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1b, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1c, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1d, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1e, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a1f, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a20, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a21, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a22, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a23, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a24, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a25, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a26, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a27, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a28, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a29, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2a, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2b, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2c, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2d, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2e, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a2f, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a30, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a31, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a32, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a33, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a34, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a35, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a36, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a37, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a38, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a39, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3a, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3b, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3c, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3d, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3e, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a3f, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a40, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a41, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a42, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a43, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a44, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a45, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a46, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a47, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a48, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a49, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4a, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4b, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4c, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4d, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4e, 0)},
|
|
|
|
|
/* PocketPC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a4f, 0)},
|
|
|
|
|
/* HTC SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a50, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a52, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a53, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a54, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a55, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a56, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a57, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a58, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a59, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5a, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5b, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5c, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5d, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5e, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a5f, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a60, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a61, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a62, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a63, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a64, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a65, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a66, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a67, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a68, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a69, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6a, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6b, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6c, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6d, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6e, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a6f, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a70, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a71, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a72, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a73, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a74, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a75, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a76, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a77, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a78, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a79, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7a, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7b, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7c, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7d, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7e, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a7f, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a80, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a81, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a82, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a83, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a84, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a85, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a86, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a87, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a88, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a89, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8a, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8b, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8c, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8d, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8e, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a8f, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a90, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a91, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a92, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a93, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a94, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a95, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a96, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a97, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a98, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a99, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9a, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9b, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9c, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9d, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9e, 0)},
|
|
|
|
|
/* SmartPhone USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, 0x0a9f, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, USB_PRODUCT_HTC_PPC6700MODEM, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, USB_PRODUCT_HTC_SMARTPHONE, 0)},
|
|
|
|
|
/**/
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, USB_PRODUCT_HTC_WINMOBILE, 0)},
|
2010-07-25 15:14:42 +00:00
|
|
|
/* High Tech Computer Wizard Smartphone */
|
|
|
|
|
{USB_VPI(USB_VENDOR_HTC, USB_PRODUCT_HTC_WIZARD, 0)},
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
/* JVC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_JVC, 0x3011, 0)},
|
|
|
|
|
/* JVC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_JVC, 0x3012, 0)},
|
|
|
|
|
/* LGE USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_LG, 0x9c01, 0)},
|
|
|
|
|
/* Microsoft USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x00ce, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0400, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0401, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0402, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0403, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0404, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0405, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0406, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0407, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0408, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0409, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040b, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040c, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040d, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040e, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x040f, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0410, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0411, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0412, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0413, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0414, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0415, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0416, 0)},
|
|
|
|
|
/* Windows Pocket PC 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0417, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0432, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0433, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0434, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0435, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0436, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0437, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0438, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0439, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043b, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043c, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043d, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043e, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x043f, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0440, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0441, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0442, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0443, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0444, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0445, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0446, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0447, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0448, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0449, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044b, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044c, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044d, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044e, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x044f, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0450, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0451, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0452, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0453, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0454, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0455, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0456, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0457, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0458, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0459, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045b, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045c, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045d, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045e, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x045f, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0460, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0461, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0462, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0463, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0464, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0465, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0466, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0467, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0468, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0469, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046b, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046c, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046d, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046e, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x046f, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0470, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0471, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0472, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0473, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0474, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0475, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0476, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0477, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0478, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x0479, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x047a, 0)},
|
|
|
|
|
/* Windows Pocket PC 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x047b, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04c8, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04c9, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04ca, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04cb, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04cc, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04cd, 0)},
|
|
|
|
|
/* Windows Smartphone 2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04ce, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04d7, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04d8, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04d9, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04da, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04db, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04dc, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04dd, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04de, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04df, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e0, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e1, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e2, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e3, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e4, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e5, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e6, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e7, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e8, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04e9, 0)},
|
|
|
|
|
/* Windows Smartphone 2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MICROSOFT, 0x04ea, 0)},
|
|
|
|
|
/* Motorola MPx200 Smartphone */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MOTOROLA2, 0x4204, 0)},
|
|
|
|
|
/* Motorola MPc GSM */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MOTOROLA2, 0x4214, 0)},
|
|
|
|
|
/* Motorola MPx220 Smartphone */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MOTOROLA2, 0x4224, 0)},
|
|
|
|
|
/* Motorola MPc CDMA */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MOTOROLA2, 0x4234, 0)},
|
|
|
|
|
/* Motorola MPx100 Smartphone */
|
|
|
|
|
{USB_VPI(USB_VENDOR_MOTOROLA2, 0x4244, 0)},
|
|
|
|
|
/* NEC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_NEC, 0x00d5, 0)},
|
|
|
|
|
/* NEC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_NEC, 0x00d6, 0)},
|
|
|
|
|
/* NEC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_NEC, 0x00d7, 0)},
|
|
|
|
|
/* NEC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_NEC, 0x8024, 0)},
|
|
|
|
|
/* NEC USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_NEC, 0x8025, 0)},
|
|
|
|
|
/* Panasonic USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_PANASONIC, 0x2500, 0)},
|
|
|
|
|
/* Samsung NEXiO USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x5f00, 0)},
|
|
|
|
|
/* Samsung NEXiO USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x5f01, 0)},
|
|
|
|
|
/* Samsung NEXiO USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x5f02, 0)},
|
|
|
|
|
/* Samsung NEXiO USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x5f03, 0)},
|
|
|
|
|
/* Samsung NEXiO USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x5f04, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6611, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6613, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6615, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6617, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6619, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x661b, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x662e, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6630, 0)},
|
|
|
|
|
/* Samsung MITs USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SAMSUNG, 0x6632, 0)},
|
|
|
|
|
/* SHARP WS003SH USB Modem */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SHARP, 0x9102, 0)},
|
|
|
|
|
/* SHARP WS004SH USB Modem */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SHARP, 0x9121, 0)},
|
|
|
|
|
/* SHARP S01SH USB Modem */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SHARP, 0x9151, 0)},
|
2009-05-21 17:47:27 +00:00
|
|
|
/**/
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WZERO3ES, 0)},
|
2009-05-21 17:47:27 +00:00
|
|
|
/**/
|
2009-12-31 00:55:50 +00:00
|
|
|
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WZERO3ADES, 0)},
|
|
|
|
|
/**/
|
2009-05-21 17:47:27 +00:00
|
|
|
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WILLCOM03, 0)},
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
/* Symbol USB Sync */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2000, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2001 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2001, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2002 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2002, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2003 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2003, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2004 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2004, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2005 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2005, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2006 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2006, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2007 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2007, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2008 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2008, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x2009 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x2009, 0)},
|
|
|
|
|
/* Symbol USB Sync 0x200a */
|
|
|
|
|
{USB_VPI(USB_VENDOR_SYMBOL, 0x200a, 0)},
|
|
|
|
|
/* TOSHIBA USB Sync 0700 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x0700, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e310 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x0705, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e330 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x0707, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e350Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x0708, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e750 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x0709, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e400 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x070a, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e800 Series */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, 0x070b, 0)},
|
|
|
|
|
/* TOSHIBA Pocket PC e740 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_TOSHIBA, USB_PRODUCT_TOSHIBA_POCKETPC_E740, 0)},
|
|
|
|
|
/* ViewSonic Color Pocket PC V35 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x0ed9, 0)},
|
|
|
|
|
/* ViewSonic Color Pocket PC V36 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x1527, 0)},
|
|
|
|
|
/* ViewSonic Color Pocket PC V37 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x1529, 0)},
|
|
|
|
|
/* ViewSonic Color Pocket PC V38 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x152b, 0)},
|
|
|
|
|
/* ViewSonic Pocket PC */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x152e, 0)},
|
|
|
|
|
/* ViewSonic Communicator Pocket PC */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x1921, 0)},
|
|
|
|
|
/* ViewSonic Smartphone */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x1922, 0)},
|
|
|
|
|
/* ViewSonic Pocket PC V30 */
|
|
|
|
|
{USB_VPI(USB_VENDOR_VIEWSONIC, 0x1923, 0)},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static device_method_t uipaq_methods[] = {
|
|
|
|
|
DEVMETHOD(device_probe, uipaq_probe),
|
|
|
|
|
DEVMETHOD(device_attach, uipaq_attach),
|
|
|
|
|
DEVMETHOD(device_detach, uipaq_detach),
|
2012-08-10 15:29:41 +00:00
|
|
|
DEVMETHOD_END
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static devclass_t uipaq_devclass;
|
|
|
|
|
|
|
|
|
|
static driver_t uipaq_driver = {
|
|
|
|
|
.name = "uipaq",
|
|
|
|
|
.methods = uipaq_methods,
|
|
|
|
|
.size = sizeof(struct uipaq_softc),
|
|
|
|
|
};
|
|
|
|
|
|
2009-03-02 05:37:05 +00:00
|
|
|
DRIVER_MODULE(uipaq, uhub, uipaq_driver, uipaq_devclass, NULL, 0);
|
2009-02-23 18:31:00 +00:00
|
|
|
MODULE_DEPEND(uipaq, ucom, 1, 1, 1);
|
|
|
|
|
MODULE_DEPEND(uipaq, usb, 1, 1, 1);
|
2010-09-01 23:47:53 +00:00
|
|
|
MODULE_VERSION(uipaq, 1);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
uipaq_probe(device_t dev)
|
|
|
|
|
{
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-05-21 00:04:17 +00:00
|
|
|
if (uaa->usb_mode != USB_MODE_HOST) {
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
|
|
|
|
if (uaa->info.bConfigIndex != UIPAQ_CONFIG_INDEX) {
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
|
|
|
|
if (uaa->info.bIfaceIndex != UIPAQ_IFACE_INDEX) {
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
2009-08-24 05:01:06 +00:00
|
|
|
if (uaa->info.bInterfaceClass == UICLASS_IAD) {
|
|
|
|
|
DPRINTF("IAD detected - not UIPAQ serial device\n");
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
2009-06-15 01:02:43 +00:00
|
|
|
return (usbd_lookup_id_by_uaa(uipaq_devs, sizeof(uipaq_devs), uaa));
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
uipaq_attach(device_t dev)
|
|
|
|
|
{
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_device_request req;
|
|
|
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
struct uipaq_softc *sc = device_get_softc(dev);
|
|
|
|
|
int error;
|
|
|
|
|
uint8_t iface_index;
|
|
|
|
|
uint8_t i;
|
|
|
|
|
|
|
|
|
|
sc->sc_udev = uaa->device;
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
device_set_usb_desc(dev);
|
2009-03-02 02:44:10 +00:00
|
|
|
mtx_init(&sc->sc_mtx, "uipaq", NULL, MTX_DEF);
|
2012-08-10 15:29:41 +00:00
|
|
|
ucom_ref(&sc->sc_super_ucom);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Send magic bytes, cribbed from Linux ipaq driver that
|
|
|
|
|
* claims to have sniffed them from Win98. Wait for driver to
|
|
|
|
|
* become ready on device side?
|
|
|
|
|
*/
|
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
|
|
|
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
|
|
|
|
|
USETW(req.wValue, UCDC_LINE_DTR);
|
|
|
|
|
USETW(req.wIndex, 0x0);
|
|
|
|
|
USETW(req.wLength, 0);
|
|
|
|
|
for (i = 0; i != 64; i++) {
|
|
|
|
|
error =
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_do_request_flags(uaa->device, NULL, &req,
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
NULL, 0, NULL, 100);
|
|
|
|
|
if (error == 0)
|
|
|
|
|
break;
|
2009-06-15 01:02:43 +00:00
|
|
|
usb_pause_mtx(NULL, hz / 10);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
iface_index = UIPAQ_IFACE_INDEX;
|
2009-06-15 01:02:43 +00:00
|
|
|
error = usbd_transfer_setup(uaa->device, &iface_index,
|
2009-01-15 02:35:40 +00:00
|
|
|
sc->sc_xfer, uipaq_config_data,
|
2009-03-02 02:44:10 +00:00
|
|
|
UIPAQ_N_TRANSFER, sc, &sc->sc_mtx);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
if (error) {
|
|
|
|
|
goto detach;
|
|
|
|
|
}
|
|
|
|
|
/* clear stall at first run */
|
2009-03-02 02:44:10 +00:00
|
|
|
mtx_lock(&sc->sc_mtx);
|
2009-06-23 02:19:59 +00:00
|
|
|
usbd_xfer_set_stall(sc->sc_xfer[UIPAQ_BULK_DT_WR]);
|
|
|
|
|
usbd_xfer_set_stall(sc->sc_xfer[UIPAQ_BULK_DT_RD]);
|
2009-03-02 02:44:10 +00:00
|
|
|
mtx_unlock(&sc->sc_mtx);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
|
2009-03-02 02:44:10 +00:00
|
|
|
&uipaq_callback, &sc->sc_mtx);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
if (error) {
|
|
|
|
|
goto detach;
|
|
|
|
|
}
|
2010-11-05 19:12:48 +00:00
|
|
|
ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
|
|
|
|
|
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
return (0);
|
|
|
|
|
|
|
|
|
|
detach:
|
|
|
|
|
uipaq_detach(dev);
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
uipaq_detach(device_t dev)
|
|
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = device_get_softc(dev);
|
|
|
|
|
|
2010-11-03 21:50:49 +00:00
|
|
|
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_unsetup(sc->sc_xfer, UIPAQ_N_TRANSFER);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
2012-08-15 15:42:57 +00:00
|
|
|
device_claim_softc(dev);
|
|
|
|
|
|
|
|
|
|
uipaq_free_softc(sc);
|
|
|
|
|
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
2012-08-10 15:29:41 +00:00
|
|
|
UCOM_UNLOAD_DRAIN(uipaq);
|
|
|
|
|
|
|
|
|
|
static void
|
2012-08-15 15:42:57 +00:00
|
|
|
uipaq_free_softc(struct uipaq_softc *sc)
|
2012-08-10 15:29:41 +00:00
|
|
|
{
|
|
|
|
|
if (ucom_unref(&sc->sc_super_ucom)) {
|
2012-08-15 15:42:57 +00:00
|
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
|
device_free_softc(sc);
|
2012-08-10 15:29:41 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
uipaq_free(struct ucom_softc *ucom)
|
|
|
|
|
{
|
2012-08-15 15:42:57 +00:00
|
|
|
uipaq_free_softc(ucom->sc_parent);
|
2012-08-10 15:29:41 +00:00
|
|
|
}
|
|
|
|
|
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_start_read(struct ucom_softc *ucom)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
|
|
|
|
|
|
|
|
|
/* start read endpoint */
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_start(sc->sc_xfer[UIPAQ_BULK_DT_RD]);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_stop_read(struct ucom_softc *ucom)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
|
|
|
|
|
|
|
|
|
/* stop read endpoint */
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_stop(sc->sc_xfer[UIPAQ_BULK_DT_RD]);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_start_write(struct ucom_softc *ucom)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_start(sc->sc_xfer[UIPAQ_BULK_DT_WR]);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_stop_write(struct ucom_softc *ucom)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_stop(sc->sc_xfer[UIPAQ_BULK_DT_WR]);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_device_request req;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
DPRINTF("onoff=%d\n", onoff);
|
|
|
|
|
|
|
|
|
|
if (onoff)
|
|
|
|
|
sc->sc_line |= UCDC_LINE_DTR;
|
|
|
|
|
else
|
|
|
|
|
sc->sc_line &= ~UCDC_LINE_DTR;
|
|
|
|
|
|
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
|
|
|
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
|
|
|
|
|
USETW(req.wValue, sc->sc_line);
|
|
|
|
|
req.wIndex[0] = UIPAQ_IFACE_INDEX;
|
|
|
|
|
req.wIndex[1] = 0;
|
|
|
|
|
USETW(req.wLength, 0);
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
2009-02-09 22:05:25 +00:00
|
|
|
&req, NULL, 0, 1000);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_device_request req;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
DPRINTF("onoff=%d\n", onoff);
|
|
|
|
|
|
|
|
|
|
if (onoff)
|
|
|
|
|
sc->sc_line |= UCDC_LINE_RTS;
|
|
|
|
|
else
|
|
|
|
|
sc->sc_line &= ~UCDC_LINE_RTS;
|
|
|
|
|
|
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
|
|
|
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
|
|
|
|
|
USETW(req.wValue, sc->sc_line);
|
|
|
|
|
req.wIndex[0] = UIPAQ_IFACE_INDEX;
|
|
|
|
|
req.wIndex[1] = 0;
|
|
|
|
|
USETW(req.wLength, 0);
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
2009-02-09 22:05:25 +00:00
|
|
|
&req, NULL, 0, 1000);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-05-28 17:36:36 +00:00
|
|
|
uipaq_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
2009-05-28 17:36:36 +00:00
|
|
|
struct usb_device_request req;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
uint16_t temp;
|
|
|
|
|
|
|
|
|
|
temp = onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF;
|
|
|
|
|
|
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
|
|
|
req.bRequest = UCDC_SEND_BREAK;
|
|
|
|
|
USETW(req.wValue, temp);
|
|
|
|
|
req.wIndex[0] = UIPAQ_IFACE_INDEX;
|
|
|
|
|
req.wIndex[1] = 0;
|
|
|
|
|
USETW(req.wLength, 0);
|
|
|
|
|
|
2009-06-15 01:02:43 +00:00
|
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
2009-02-09 22:05:25 +00:00
|
|
|
&req, NULL, 0, 1000);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-06-23 02:19:59 +00:00
|
|
|
uipaq_write_callback(struct usb_xfer *xfer, usb_error_t error)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
2009-06-23 02:19:59 +00:00
|
|
|
struct uipaq_softc *sc = usbd_xfer_softc(xfer);
|
|
|
|
|
struct usb_page_cache *pc;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
uint32_t actlen;
|
|
|
|
|
|
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
|
|
|
case USB_ST_SETUP:
|
|
|
|
|
case USB_ST_TRANSFERRED:
|
2009-02-09 22:05:25 +00:00
|
|
|
tr_setup:
|
2009-06-23 02:19:59 +00:00
|
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
|
|
|
if (ucom_get_data(&sc->sc_ucom, pc, 0,
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
UIPAQ_BUF_SIZE, &actlen)) {
|
2009-06-23 02:19:59 +00:00
|
|
|
usbd_xfer_set_frame_len(xfer, 0, actlen);
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_submit(xfer);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
default: /* Error */
|
2009-06-23 02:19:59 +00:00
|
|
|
if (error != USB_ERR_CANCELLED) {
|
2009-02-09 22:05:25 +00:00
|
|
|
/* try to clear stall first */
|
2009-06-23 02:19:59 +00:00
|
|
|
usbd_xfer_set_stall(xfer);
|
2009-02-09 22:05:25 +00:00
|
|
|
goto tr_setup;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2009-06-23 02:19:59 +00:00
|
|
|
uipaq_read_callback(struct usb_xfer *xfer, usb_error_t error)
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
{
|
2009-06-23 02:19:59 +00:00
|
|
|
struct uipaq_softc *sc = usbd_xfer_softc(xfer);
|
|
|
|
|
struct usb_page_cache *pc;
|
|
|
|
|
int actlen;
|
|
|
|
|
|
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
|
|
|
case USB_ST_TRANSFERRED:
|
2009-06-23 02:19:59 +00:00
|
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
|
|
|
ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
case USB_ST_SETUP:
|
2009-02-09 22:05:25 +00:00
|
|
|
tr_setup:
|
2009-06-23 02:19:59 +00:00
|
|
|
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
|
2009-06-15 01:02:43 +00:00
|
|
|
usbd_transfer_submit(xfer);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
default: /* Error */
|
2009-06-23 02:19:59 +00:00
|
|
|
if (error != USB_ERR_CANCELLED) {
|
2009-02-09 22:05:25 +00:00
|
|
|
/* try to clear stall first */
|
2009-06-23 02:19:59 +00:00
|
|
|
usbd_xfer_set_stall(xfer);
|
2009-02-09 22:05:25 +00:00
|
|
|
goto tr_setup;
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
}
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
2009-09-28 08:13:50 +00:00
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
uipaq_poll(struct ucom_softc *ucom)
|
|
|
|
|
{
|
|
|
|
|
struct uipaq_softc *sc = ucom->sc_parent;
|
|
|
|
|
usbd_transfer_poll(sc->sc_xfer, UIPAQ_N_TRANSFER);
|
|
|
|
|
}
|
